123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Malyan M180 pin assignments
- * Contributed by Timo Birnschein (timo.birnschein@microforge.de)
- */
-
- #include "env_validate.h"
-
- #define BOARD_INFO_NAME "Malyan M180 v.2"
- //
- // Limit Switches
- //
- #define X_STOP_PIN 48
- #define Y_STOP_PIN 46
- #define Z_STOP_PIN 42
-
- //
- // Z Probe (when not Z_MIN_PIN)
- //
- #ifndef Z_MIN_PROBE_PIN
- #define Z_MIN_PROBE_PIN -1
- #endif
-
- //
- // Steppers
- //
- #define X_STEP_PIN 55
- #define X_DIR_PIN 54
- #define X_ENABLE_PIN 56
-
- #define Y_STEP_PIN 59
- #define Y_DIR_PIN 58
- #define Y_ENABLE_PIN 60
-
- #define Z_STEP_PIN 63
- #define Z_DIR_PIN 62
- #define Z_ENABLE_PIN 64
-
- #define E0_STEP_PIN 25
- #define E0_DIR_PIN 24
- #define E0_ENABLE_PIN 26
-
- #define E1_STEP_PIN 29
- #define E1_DIR_PIN 28
- #define E1_ENABLE_PIN 39
-
- //
- // Temperature Sensors
- //
- #define TEMP_BED_PIN 15 // Analog Input
-
- // Extruder thermocouples 0 and 1 are read out by two separate ICs using
- // SPI for MAX Thermocouple
- // Uses a separate SPI bus
- #define TEMP_0_CS_PIN 5 // E3 - CS0
- #define TEMP_0_SCK_PIN 78 // E2 - SCK
- #define TEMP_0_MISO_PIN 3 // E5 - MISO
- //#define TEMP_0_MOSI_PIN ... // For MAX31865
-
- #define TEMP_1_CS_PIN 2 // E4 - CS1
- #define TEMP_1_SCK_PIN TEMP_0_SCK_PIN
- #define TEMP_1_MISO_PIN TEMP_0_MISO_PIN
- //#define TEMP_1_MOSI_PIN TEMP_0_MOSI_PIN
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN 6
- #define HEATER_1_PIN 11
- #define HEATER_BED_PIN 45
-
- #ifndef FAN_PIN
- #define FAN_PIN 7 // M106 Sxxx command supported and tested. M107 as well.
- #endif
-
- #ifndef FAN_PIN1
- #define FAN_PIN1 12 // Currently Unsupported by Marlin
- #endif
|