123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- #include "env_validate.h"
-
- /**
- * 21017 Victor Perez Marlin for stm32f1 test
- */
-
- #define BOARD_INFO_NAME "Beast STM32"
- #define DEFAULT_MACHINE_NAME "STM32F103RET6"
-
- // Enable I2C_EEPROM for testing
- #define I2C_EEPROM
-
- // Ignore temp readings during development.
- //#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
-
- //
- // Limit Switches
- //
- #define X_STOP_PIN PD5
- #define Y_STOP_PIN PD6
- #define Z_STOP_PIN PD7
-
- //
- // Steppers
- //
- #define X_STEP_PIN PE0
- #define X_DIR_PIN PE1
- #define X_ENABLE_PIN PC0
-
- #define Y_STEP_PIN PE2
- #define Y_DIR_PIN PE3
- #define Y_ENABLE_PIN PC1
-
- #define Z_STEP_PIN PE4
- #define Z_DIR_PIN PE5
- #define Z_ENABLE_PIN PC2
-
- #define E0_STEP_PIN PE6
- #define E0_DIR_PIN PE7
- #define E0_ENABLE_PIN PC3
-
- /**
- * TODO: Currently using same Enable pin to all steppers.
- */
-
- #define E1_STEP_PIN PE8
- #define E1_DIR_PIN PE9
- #define E1_ENABLE_PIN PC4
-
- #define E2_STEP_PIN PE10
- #define E2_DIR_PIN PE11
- #define E2_ENABLE_PIN PC5
-
- //
- // Misc. Functions
- //
- #define SDSS PA15
- #define LED_PIN PB2
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN PD12 // EXTRUDER 1
- #define HEATER_1_PIN PD13
- #define HEATER_2_PIN PD14
-
- #define HEATER_BED_PIN PB9 // BED
-
- #ifndef FAN_PIN
- #define FAN_PIN PB10
- #endif
-
- #define FAN_SOFT_PWM_REQUIRED
-
- //
- // Temperature Sensors
- //
- #define TEMP_BED_PIN PA0 // Analog Input
- #define TEMP_0_PIN PA1 // Analog Input
- #define TEMP_1_PIN PA2 // Analog Input
- #define TEMP_2_PIN PA3 // Analog Input
-
- //
- // LCD Pins
- //
- #if HAS_WIRED_LCD
-
- #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
- #error "REPRAPWORLD_GRAPHICAL_LCD is not supported."
- #else
- #define LCD_PINS_RS PB8
- #define LCD_PINS_ENABLE PD2
- #define LCD_PINS_D4 PB12
- #define LCD_PINS_D5 PB13
- #define LCD_PINS_D6 PB14
- #define LCD_PINS_D7 PB15
- #if !IS_NEWPANEL
- #error "Non-NEWPANEL LCD is not supported."
- #endif
- #endif
-
- #if IS_NEWPANEL
- #if IS_RRD_SC
- #error "RRD Smart Controller is not supported."
- #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
- #error "REPRAPWORLD_GRAPHICAL_LCD is not supported."
- #elif ENABLED(LCD_I2C_PANELOLU2)
- #error "LCD_I2C_PANELOLU2 is not supported."
- #elif ENABLED(LCD_I2C_VIKI)
- #error "LCD_I2C_VIKI is not supported."
- #elif EITHER(VIKI2, miniVIKI)
- #error "VIKI2 / miniVIKI is not supported."
- #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
- #error "ELB_FULL_GRAPHIC_CONTROLLER is not supported."
- #elif ENABLED(MINIPANEL)
- #error "MINIPANEL is not supported."
- #else
- #error "Other generic NEWPANEL LCD is not supported."
- #endif
- #endif // IS_NEWPANEL
-
- #endif // HAS_WIRED_LCD
|