123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- // https://github.com/ktand/Armed
-
- #include "env_validate.h"
-
- #if HOTENDS > 2 || E_STEPPERS > 2
- #error "Arm'ed supports up to 2 hotends / E steppers."
- #endif
-
- #ifndef ARMED_V1_0
- #define ARMED_V1_1
- #endif
-
- #undef BOARD_INFO_NAME // Defined on the command line by Arduino Core STM32
- #define BOARD_INFO_NAME "Arm'ed"
- #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
-
- #if NO_EEPROM_SELECTED
- #define I2C_EEPROM
- #define MARLIN_EEPROM_SIZE 0x1000 // 4K
- #endif
-
- //
- // Limit Switches
- //
- #define X_STOP_PIN PE0
- #define Y_STOP_PIN PE1
- #define Z_STOP_PIN PE14
-
- //
- // Z Probe (when not Z_MIN_PIN)
- //
- //#ifndef Z_MIN_PROBE_PIN
- // #define Z_MIN_PROBE_PIN PA4
- //#endif
-
- //
- // Filament Runout Sensor
- //
- #ifndef FIL_RUNOUT_PIN
- #define FIL_RUNOUT_PIN PA3
- #endif
-
- //
- // Steppers
- //
-
- #ifdef ARMED_SWAP_X_E1
- #define X_STEP_PIN PE4
- #define X_DIR_PIN PE2
- #define X_ENABLE_PIN PE3
- #define X_CS_PIN PE5
- #else
- #define X_STEP_PIN PD3
- #define X_DIR_PIN PD2
- #define X_ENABLE_PIN PD0
- #define X_CS_PIN PD1
- #endif
-
- #define Y_STEP_PIN PE11
- #define Y_DIR_PIN PE10
- #define Y_ENABLE_PIN PE13
- #define Y_CS_PIN PE12
-
- #define Z_STEP_PIN PD6
- #define Z_DIR_PIN PD7
- #define Z_ENABLE_PIN PD4
- #define Z_CS_PIN PD5
-
- #define E0_STEP_PIN PB5
- #define E0_DIR_PIN PB6
- #ifdef ARMED_V1_1
- #define E0_ENABLE_PIN PC12
- #else
- #define E0_ENABLE_PIN PB3
- #endif
- #define E0_CS_PIN PB4
-
- #ifdef ARMED_SWAP_X_E1
- #define E1_STEP_PIN PD3
- #define E1_DIR_PIN PD2
- #define E1_ENABLE_PIN PD0
- #define E1_CS_PIN PD1
- #else
- #define E1_STEP_PIN PE4
- #define E1_DIR_PIN PE2
- #define E1_ENABLE_PIN PE3
- #define E1_CS_PIN PE5
- #endif
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN PC0 // Analog Input
- #define TEMP_1_PIN PC1 // Analog Input
- #define TEMP_BED_PIN PC2 // Analog Input
-
- #if HOTENDS == 1 && TEMP_SENSOR_PROBE
- #define TEMP_PROBE_PIN PC1
- #endif
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN PA1 // Hardware PWM
- #define HEATER_1_PIN PA2 // Hardware PWM
- #define HEATER_BED_PIN PA0 // Hardware PWM
-
- #define FAN_PIN PC6 // Hardware PWM, Part cooling fan
- #define FAN1_PIN PC7 // Hardware PWM, Extruder fan
- #define FAN2_PIN PC8 // Hardware PWM, Controller fan
-
- //
- // Misc functions
- //
- #define SDSS PE7
- #define LED_PIN PB7 // Heart beat
- #define PS_ON_PIN PA10
- #define KILL_PIN PA8
- #define PWR_LOSS PA4 // Power loss / nAC_FAULT
-
- //
- // LCD / Controller
- //
- #define SD_DETECT_PIN PA15
- #define BEEPER_PIN PC9
-
- #if ENABLED(FYSETC_MINI_12864)
- //
- // See https://wiki.fysetc.com/Mini12864_Panel/
- //
- #define DOGLCD_A0 PE9
- #define DOGLCD_CS PE8
-
- #define LCD_BACKLIGHT_PIN -1
-
- #define LCD_RESET_PIN PB12 // Must be high or open for LCD to operate normally.
-
- #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
- #ifndef RGB_LED_R_PIN
- #define RGB_LED_R_PIN PB13
- #endif
- #ifndef RGB_LED_G_PIN
- #define RGB_LED_G_PIN PB14
- #endif
- #ifndef RGB_LED_B_PIN
- #define RGB_LED_B_PIN PB15
- #endif
- #elif ENABLED(FYSETC_MINI_12864_2_1)
- #define NEOPIXEL_PIN PB13
- #endif
- #else
- #define LCD_PINS_RS PE9
- #define LCD_PINS_ENABLE PE8
- #define LCD_PINS_D4 PB12
- #define LCD_PINS_D5 PB13
- #define LCD_PINS_D6 PB14
- #define LCD_PINS_D7 PB15
-
- #if ENABLED(MKS_MINI_12864)
- #define DOGLCD_CS PB13
- #define DOGLCD_A0 PB14
- #endif
- #endif
-
- #define BTN_EN1 PC4
- #define BTN_EN2 PC5
- #define BTN_ENC PC3
-
- //
- // Extension pins
- //
- #define EXT0_PIN PB0
- #define EXT1_PIN PB1
- #define EXT2_PIN PB2
- #define EXT3_PIN PD8
- #define EXT4_PIN PD9
- #define EXT5_PIN PD10
- #define EXT6_PIN PD11
- #define EXT7_PIN PD12
- #define EXT8_PIN PB10
- #define EXT9_PIN PB11
-
- #if HAS_TMC_UART
- // TMC2208/TMC2209 stepper drivers
- #define X_SERIAL_TX_PIN EXT0_PIN
- #define X_SERIAL_RX_PIN EXT0_PIN
-
- #define Y_SERIAL_TX_PIN EXT1_PIN
- #define Y_SERIAL_RX_PIN EXT1_PIN
-
- #define Z_SERIAL_TX_PIN EXT2_PIN
- #define Z_SERIAL_RX_PIN EXT2_PIN
-
- #define E0_SERIAL_TX_PIN EXT3_PIN
- #define E0_SERIAL_RX_PIN EXT3_PIN
-
- #define E1_SERIAL_RX_PIN EXT4_PIN
- #define E1_SERIAL_TX_PIN EXT4_PIN
-
- #define Z2_SERIAL_RX_PIN EXT4_PIN
- #define Z2_SERIAL_TX_PIN EXT4_PIN
-
- #define TMC_BAUD_RATE 19200
- #endif
|