My Marlin configs for Fabrikator Mini and CTC i3 Pro B
選択できるのは25トピックまでです。 トピックは、先頭が英数字で、英数字とダッシュ('-')を使用した35文字以内のものにしてください。

pins_AZTEEG_X3_PRO.h 4.7KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * AZTEEG_X3_PRO (Arduino Mega) pin assignments
  24. */
  25. #if HOTENDS > 5 || E_STEPPERS > 5
  26. #error "Azteeg X3 Pro supports up to 5 hotends / E-steppers. Comment out this line to continue."
  27. #endif
  28. #define BOARD_NAME "Azteeg X3 Pro"
  29. #if !PIN_EXISTS(CASE_LIGHT) // doesn't already exist so OK to change the definition coming
  30. #define OK_TO_CHANGE_CASE_LIGHT // in from from the include file
  31. #endif
  32. #include "pins_RAMPS.h"
  33. #ifndef __AVR_ATmega2560__
  34. #error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
  35. #endif
  36. //
  37. // Servos
  38. //
  39. // Tested this pin with bed leveling on a Delta with 1 servo.
  40. // Physical wire attachment on EXT1: GND, 5V, D47.
  41. //
  42. #undef SERVO0_PIN
  43. #define SERVO0_PIN 47
  44. //
  45. // Limit Switches
  46. //
  47. // Swap the MIN and MAX endstop pins because the X3 Pro comes with only
  48. // MIN endstop pin headers soldered onto the board.
  49. //
  50. #if ENABLED(DELTA)
  51. #undef X_MIN_PIN
  52. #undef X_MAX_PIN
  53. #undef Y_MIN_PIN
  54. #undef Y_MAX_PIN
  55. #undef Z_MIN_PIN
  56. #undef Z_MAX_PIN
  57. #define X_MIN_PIN 2
  58. #define X_MAX_PIN 3
  59. #define Y_MIN_PIN 15
  60. #define Y_MAX_PIN 14
  61. #define Z_MIN_PIN 19
  62. #define Z_MAX_PIN 18
  63. #endif
  64. //
  65. // Z Probe (when not Z_MIN_PIN)
  66. //
  67. #ifndef Z_MIN_PROBE_PIN
  68. #define Z_MIN_PROBE_PIN 18
  69. #endif
  70. //
  71. // Steppers
  72. //
  73. #define E2_STEP_PIN 23
  74. #define E2_DIR_PIN 25
  75. #define E2_ENABLE_PIN 40
  76. #define E3_STEP_PIN 27
  77. #define E3_DIR_PIN 29
  78. #define E3_ENABLE_PIN 41
  79. #define E4_STEP_PIN 43
  80. #define E4_DIR_PIN 37
  81. #define E4_ENABLE_PIN 42
  82. //
  83. // Temperature Sensors
  84. //
  85. #define TEMP_2_PIN 12 // Analog Input
  86. #define TEMP_3_PIN 11 // Analog Input
  87. #define TEMP_4_PIN 10 // Analog Input
  88. #define TC1 4 // Analog Input (Thermo couple on Azteeg X3Pro)
  89. #define TC2 5 // Analog Input (Thermo couple on Azteeg X3Pro)
  90. //
  91. // Heaters / Fans
  92. //
  93. #define HEATER_2_PIN 16
  94. #define HEATER_3_PIN 17
  95. #define HEATER_4_PIN 4
  96. #define HEATER_5_PIN 5
  97. #define HEATER_6_PIN 6
  98. #define HEATER_7_PIN 11
  99. #undef FAN_PIN
  100. #define FAN_PIN 6 // Part Cooling System
  101. #ifndef CONTROLLER_FAN_PIN
  102. #define CONTROLLER_FAN_PIN 4 // Pin used for the fan to cool motherboard (-1 to disable)
  103. #endif
  104. // Fans/Water Pump to cool the hotend cool side.
  105. #define ORIG_E0_AUTO_FAN_PIN 5
  106. #define ORIG_E1_AUTO_FAN_PIN 5
  107. #define ORIG_E2_AUTO_FAN_PIN 5
  108. #define ORIG_E3_AUTO_FAN_PIN 5
  109. //
  110. // LCD / Controller
  111. //
  112. #undef BEEPER_PIN
  113. #define BEEPER_PIN 33
  114. #if ENABLED(VIKI2) || ENABLED(miniVIKI)
  115. #undef SD_DETECT_PIN
  116. #define SD_DETECT_PIN 49 // For easy adapter board
  117. #undef BEEPER_PIN
  118. #define BEEPER_PIN 12 // 33 isn't physically available to the LCD display
  119. #else
  120. #define STAT_LED_RED_PIN 32
  121. #define STAT_LED_BLUE_PIN 35
  122. #endif
  123. //
  124. // Misc. Functions
  125. //
  126. #if ENABLED(OK_TO_CHANGE_CASE_LIGHT)
  127. #undef DOGLCD_A0 // steal pin 44 for the case light; if you have a Viki2 and have connected it
  128. #define DOGLCD_A0 57 // following the Panucatt wiring diagram, you may need to tweak these pin assignments
  129. // as the wiring diagram uses pin 44 for DOGLCD_A0
  130. #undef CASE_LIGHT_PIN
  131. #define CASE_LIGHT_PIN 44 // must have a hardware PWM
  132. #endif
  133. //
  134. // M3/M4/M5 - Spindle/Laser Control
  135. //
  136. #undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are no good with the AzteegX3 board
  137. #undef SPINDLE_LASER_ENABLE_PIN
  138. #undef SPINDLE_DIR_PIN
  139. #if ENABLED(SPINDLE_LASER_ENABLE) // use EXP2 header
  140. #if ENABLED(VIKI2) || ENABLED(miniVIKI)
  141. #undef BTN_EN2
  142. #define BTN_EN2 31 // need 7 for the spindle speed PWM
  143. #endif
  144. #define SPINDLE_LASER_PWM_PIN 7 // must have a hardware PWM
  145. #define SPINDLE_LASER_ENABLE_PIN 20 // Pin should have a pullup!
  146. #define SPINDLE_DIR_PIN 21
  147. #endif