123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- #include "env_validate.h"
-
- #define BOARD_INFO_NAME "FLY_MINI"
- #define BOARD_WEBSITE_URL "github.com/FLYmaker/FLY-MINI"
- #define DISABLE_JTAG
-
- //
- // Flash EEPROM Emulation
- //
- #if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
- #define FLASH_EEPROM_EMULATION
- #define EEPROM_PAGE_SIZE 0x800 // 2K
- #define EEPROM_START_ADDRESS (0x8000000 + 256 * 1024 - 2 * EEPROM_PAGE_SIZE) // 256K firmware space
- #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
- #endif
-
- //
- // Servos
- //
- #define SERVO0_PIN PA8
-
- //
- // Limit Switches
- //
- #define X_MIN_PIN PC12
- #define X_MAX_PIN PC11
- #define Y_MIN_PIN PC10
- #define Y_MAX_PIN PA15
- #define Z_MIN_PIN PA14
- #define Z_MAX_PIN PA13
-
- //
- // Steppers
- //
- #define X_STEP_PIN PB1
- #define X_DIR_PIN PB2
- #define X_ENABLE_PIN PB10
- #ifndef X_CS_PIN
- #define X_CS_PIN PB0
- #endif
-
- #define Y_STEP_PIN PA2
- #define Y_DIR_PIN PC4
- #define Y_ENABLE_PIN PC5
- #ifndef Y_CS_PIN
- #define Y_CS_PIN PA7
- #endif
-
- #define Z_STEP_PIN PA3
- #define Z_DIR_PIN PA5
- #define Z_ENABLE_PIN PA6
- #ifndef Z_CS_PIN
- #define Z_CS_PIN PA4
- #endif
-
- #define E0_STEP_PIN PA1
- #define E0_DIR_PIN PC3
- #define E0_ENABLE_PIN PA0
- #ifndef E0_CS_PIN
- #define E0_CS_PIN PC2
- #endif
-
- #if ENABLED(TMC_USE_SW_SPI)
- #ifndef TMC_SW_MOSI
- #define TMC_SW_MOSI EXP2_06_PIN
- #endif
- #ifndef TMC_SW_MISO
- #define TMC_SW_MISO EXP2_01_PIN
- #endif
- #ifndef TMC_SW_SCK
- #define TMC_SW_SCK EXP2_02_PIN
- #endif
- #endif
-
- #if HAS_TMC_UART
- #define X_SERIAL_TX_PIN PB0
- #define X_SERIAL_RX_PIN X_SERIAL_TX_PIN
- #define Y_SERIAL_TX_PIN PA7
- #define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN
- #define Z_SERIAL_TX_PIN PA4
- #define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN
- #define E0_SERIAL_TX_PIN PC2
- #define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN
- #endif
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN PC6
- #define HEATER_BED_PIN PC7
- #ifndef FAN_PIN
- #define FAN_PIN PC8
- #endif
- #define FAN1_PIN PC9
-
- //
- // Temperature Sensors
- //
- #define TEMP_BED_PIN PC0 // Analog Input
- #define TEMP_0_PIN PC1 // Analog Input
-
- /** ------ ------
- * (BEEPER) PC14 | 1 2 | PC13 (BTN_ENC) (MISO) PB14 | 1 2 | PB13 (SD_SCK)
- * (LCD_EN) PB9 | 3 4 | PB8 (LCD_RS) (BTN_EN1) PB3 | 3 4 | PB12 (SD_CS2)
- * (LCD_D4) PB7 5 6 | PB6 (LCD_D5) (BTN_EN2) PD2 5 6 | PB15 (SD_MOSI)
- * (LCD_D6) PB5 | 7 8 | PB4 (LCD_D7) (SD_DETECT) PB11 | 7 8 | RESET
- * GND | 9 10 | 5V GND | 9 10 | --
- * ------ ------
- * EXP1 EXP2
- */
- #define EXP1_01_PIN PC14
- #define EXP1_02_PIN PC13
- #define EXP1_03_PIN PB9
- #define EXP1_04_PIN PB8
- #define EXP1_05_PIN PB7
- #define EXP1_06_PIN PB6
- #define EXP1_07_PIN PB5
- #define EXP1_08_PIN PB4
-
- #define EXP2_01_PIN PB14
- #define EXP2_02_PIN PB13
- #define EXP2_03_PIN PB3
- #define EXP2_04_PIN PB12
- #define EXP2_05_PIN PD2
- #define EXP2_06_PIN PB15
- #define EXP2_07_PIN PB11
- #define EXP2_08_PIN -1 // RESET
-
- //
- // LCD / Controller
- //
- #if HAS_WIRED_LCD
-
- #define SPI_DEVICE 2
- #define SD_SS_PIN EXP2_04_PIN
- #define SD_SCK_PIN EXP2_02_PIN
- #define SD_MISO_PIN EXP2_01_PIN
- #define SD_MOSI_PIN EXP2_06_PIN
-
- #define SDSS SD_SS_PIN
- #define SD_DETECT_PIN EXP2_07_PIN
-
- #define BEEPER_PIN EXP1_01_PIN
-
- #define LCD_PINS_RS EXP1_04_PIN
- #define LCD_PINS_ENABLE EXP1_03_PIN
- #define LCD_PINS_D4 EXP1_05_PIN
- #define LCD_PINS_D5 EXP1_06_PIN
- #define LCD_PINS_D6 EXP1_07_PIN
- #define LCD_PINS_D7 EXP1_08_PIN
-
- #define BTN_EN1 EXP2_05_PIN
- #define BTN_EN2 EXP2_03_PIN
- #define BTN_ENC EXP1_02_PIN
-
- #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
- #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
- #endif
-
- // Alter timing for graphical display
- #if IS_U8GLIB_ST7920
- #define BOARD_ST7920_DELAY_1 96
- #define BOARD_ST7920_DELAY_2 48
- #define BOARD_ST7920_DELAY_3 715
- #endif
-
- #endif // HAS_WIRED_LCD
|