My Marlin configs for Fabrikator Mini and CTC i3 Pro B
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Configuration_adv.h 36KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. // Sample configuration file for Vellemann K8200
  23. // tested on K8200 with VM8201 (Display)
  24. // and Arduino 1.6.8 (Mac) by @CONSULitAS, 2016-02-21
  25. // https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-02-21.zip
  26. /**
  27. * Configuration_adv.h
  28. *
  29. * Advanced settings.
  30. * Only change these if you know exactly what you're doing.
  31. * Some of these settings can damage your printer if improperly set!
  32. *
  33. * Basic settings can be found in Configuration.h
  34. *
  35. */
  36. #ifndef CONFIGURATION_ADV_H
  37. #define CONFIGURATION_ADV_H
  38. /**
  39. *
  40. * ***********************************
  41. * ** ATTENTION TO ALL DEVELOPERS **
  42. * ***********************************
  43. *
  44. * You must increment this version number for every significant change such as,
  45. * but not limited to: ADD, DELETE RENAME OR REPURPOSE any directive/option.
  46. *
  47. * Note: Update also Version.h !
  48. */
  49. #define CONFIGURATION_ADV_H_VERSION 010100
  50. #include "Conditionals.h"
  51. // @section temperature
  52. //===========================================================================
  53. //=============================Thermal Settings ============================
  54. //===========================================================================
  55. #if DISABLED(PIDTEMPBED)
  56. #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
  57. #if ENABLED(BED_LIMIT_SWITCHING)
  58. #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
  59. #endif
  60. #endif
  61. /**
  62. * Thermal Protection protects your printer from damage and fire if a
  63. * thermistor falls out or temperature sensors fail in any way.
  64. *
  65. * The issue: If a thermistor falls out or a temperature sensor fails,
  66. * Marlin can no longer sense the actual temperature. Since a disconnected
  67. * thermistor reads as a low temperature, the firmware will keep the heater on.
  68. *
  69. * The solution: Once the temperature reaches the target, start observing.
  70. * If the temperature stays too far below the target (hysteresis) for too long (period),
  71. * the firmware will halt the machine as a safety precaution.
  72. *
  73. * If you get false positives for "Thermal Runaway" increase THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
  74. */
  75. #if ENABLED(THERMAL_PROTECTION_HOTENDS)
  76. #define THERMAL_PROTECTION_PERIOD 60 // Seconds
  77. #define THERMAL_PROTECTION_HYSTERESIS 8 // Degrees Celsius
  78. /**
  79. * Whenever an M104 or M109 increases the target temperature the firmware will wait for the
  80. * WATCH_TEMP_PERIOD to expire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE
  81. * degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109,
  82. * but only if the current temperature is far enough below the target for a reliable test.
  83. *
  84. * If you get false positives for "Heating failed" increase WATCH_TEMP_PERIOD and/or decrease WATCH_TEMP_INCREASE
  85. * WATCH_TEMP_INCREASE should not be below 2.
  86. */
  87. #define WATCH_TEMP_PERIOD 30 // Seconds
  88. #define WATCH_TEMP_INCREASE 4 // Degrees Celsius
  89. #endif
  90. /**
  91. * Thermal Protection parameters for the bed are just as above for hotends.
  92. */
  93. #if ENABLED(THERMAL_PROTECTION_BED)
  94. #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds
  95. #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
  96. /**
  97. * Whenever an M140 or M190 increases the target temperature the firmware will wait for the
  98. * WATCH_BED_TEMP_PERIOD to expire, and if the temperature hasn't increased by WATCH_BED_TEMP_INCREASE
  99. * degrees, the machine is halted, requiring a hard reset. This test restarts with any M140/M190,
  100. * but only if the current temperature is far enough below the target for a reliable test.
  101. *
  102. * If you get too many "Heating failed" errors, increase WATCH_BED_TEMP_PERIOD and/or decrease
  103. * WATCH_BED_TEMP_INCREASE. (WATCH_BED_TEMP_INCREASE should not be below 2.)
  104. */
  105. #define WATCH_BED_TEMP_PERIOD 60 // Seconds
  106. #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius
  107. #endif
  108. #if ENABLED(PIDTEMP)
  109. // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
  110. // if Kc is chosen well, the additional required power due to increased melting should be compensated.
  111. #define PID_ADD_EXTRUSION_RATE
  112. #if ENABLED(PID_ADD_EXTRUSION_RATE)
  113. #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
  114. #define LPQ_MAX_LEN 50
  115. #endif
  116. #endif
  117. /**
  118. * Automatic Temperature:
  119. * The hotend target temperature is calculated by all the buffered lines of gcode.
  120. * The maximum buffered steps/sec of the extruder motor is called "se".
  121. * Start autotemp mode with M109 S<mintemp> B<maxtemp> F<factor>
  122. * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by
  123. * mintemp and maxtemp. Turn this off by executing M109 without F*
  124. * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp.
  125. * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode
  126. */
  127. #define AUTOTEMP
  128. #if ENABLED(AUTOTEMP)
  129. #define AUTOTEMP_OLDWEIGHT 0.98
  130. #endif
  131. //Show Temperature ADC value
  132. //The M105 command return, besides traditional information, the ADC value read from temperature sensors.
  133. //#define SHOW_TEMP_ADC_VALUES
  134. /**
  135. * High Temperature Thermistor Support
  136. *
  137. * Thermistors able to support high temperature tend to have a hard time getting
  138. * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP
  139. * will probably be caught when the heating element first turns on during the
  140. * preheating process, which will trigger a min_temp_error as a safety measure
  141. * and force stop everything.
  142. * To circumvent this limitation, we allow for a preheat time (during which,
  143. * min_temp_error won't be triggered) and add a min_temp buffer to handle
  144. * aberrant readings.
  145. *
  146. * If you want to enable this feature for your hotend thermistor(s)
  147. * uncomment and set values > 0 in the constants below
  148. */
  149. // The number of consecutive low temperature errors that can occur
  150. // before a min_temp_error is triggered. (Shouldn't be more than 10.)
  151. //#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0
  152. // The number of milliseconds a hotend will preheat before starting to check
  153. // the temperature. This value should NOT be set to the time it takes the
  154. // hot end to reach the target temperature, but the time it takes to reach
  155. // the minimum temperature your thermistor can read. The lower the better/safer.
  156. // This shouldn't need to be more than 30 seconds (30000)
  157. //#define MILLISECONDS_PREHEAT_TIME 0
  158. // @section extruder
  159. // extruder run-out prevention.
  160. //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
  161. //#define EXTRUDER_RUNOUT_PREVENT
  162. #define EXTRUDER_RUNOUT_MINTEMP 190
  163. #define EXTRUDER_RUNOUT_SECONDS 30
  164. #define EXTRUDER_RUNOUT_ESTEPS 14 // mm filament
  165. #define EXTRUDER_RUNOUT_SPEED 1500 // extrusion speed
  166. #define EXTRUDER_RUNOUT_EXTRUDE 100
  167. // @section temperature
  168. //These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
  169. //The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
  170. #define TEMP_SENSOR_AD595_OFFSET 0.0
  171. #define TEMP_SENSOR_AD595_GAIN 1.0
  172. //This is for controlling a fan to cool down the stepper drivers
  173. //it will turn on when any driver is enabled
  174. //and turn off after the set amount of seconds from last driver being disabled again
  175. #define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable)
  176. #define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run
  177. #define CONTROLLERFAN_SPEED 255 // == full speed
  178. // When first starting the main fan, run it at full speed for the
  179. // given number of milliseconds. This gets the fan spinning reliably
  180. // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
  181. #define FAN_KICKSTART_TIME 500
  182. // This defines the minimal speed for the main fan, run in PWM mode
  183. // to enable uncomment and set minimal PWM speed for reliable running (1-255)
  184. // if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM
  185. #define FAN_MIN_PWM 50
  186. // @section extruder
  187. // Extruder cooling fans
  188. // Configure fan pin outputs to automatically turn on/off when the associated
  189. // extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
  190. // Multiple extruders can be assigned to the same pin in which case
  191. // the fan will turn on when any selected extruder is above the threshold.
  192. #define EXTRUDER_0_AUTO_FAN_PIN -1
  193. #define EXTRUDER_1_AUTO_FAN_PIN -1
  194. #define EXTRUDER_2_AUTO_FAN_PIN -1
  195. #define EXTRUDER_3_AUTO_FAN_PIN -1
  196. #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
  197. #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
  198. //===========================================================================
  199. //============================ Mechanical Settings ==========================
  200. //===========================================================================
  201. // @section homing
  202. #define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing
  203. // @section extras
  204. //#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats.
  205. // Dual X Steppers
  206. // Uncomment this option to drive two X axis motors.
  207. // The next unused E driver will be assigned to the second X stepper.
  208. //#define X_DUAL_STEPPER_DRIVERS
  209. #if ENABLED(X_DUAL_STEPPER_DRIVERS)
  210. // Set true if the two X motors need to rotate in opposite directions
  211. #define INVERT_X2_VS_X_DIR true
  212. #endif
  213. // Dual Y Steppers
  214. // Uncomment this option to drive two Y axis motors.
  215. // The next unused E driver will be assigned to the second Y stepper.
  216. //#define Y_DUAL_STEPPER_DRIVERS
  217. #if ENABLED(Y_DUAL_STEPPER_DRIVERS)
  218. // Set true if the two Y motors need to rotate in opposite directions
  219. #define INVERT_Y2_VS_Y_DIR true
  220. #endif
  221. // A single Z stepper driver is usually used to drive 2 stepper motors.
  222. // Uncomment this option to use a separate stepper driver for each Z axis motor.
  223. // The next unused E driver will be assigned to the second Z stepper.
  224. //#define Z_DUAL_STEPPER_DRIVERS
  225. #if ENABLED(Z_DUAL_STEPPER_DRIVERS)
  226. // Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper.
  227. // That way the machine is capable to align the bed during home, since both Z steppers are homed.
  228. // There is also an implementation of M666 (software endstops adjustment) to this feature.
  229. // After Z homing, this adjustment is applied to just one of the steppers in order to align the bed.
  230. // One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2.
  231. // If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive.
  232. // Play a little bit with small adjustments (0.5mm) and check the behaviour.
  233. // The M119 (endstops report) will start reporting the Z2 Endstop as well.
  234. //#define Z_DUAL_ENDSTOPS
  235. #if ENABLED(Z_DUAL_ENDSTOPS)
  236. #define Z2_USE_ENDSTOP _XMAX_
  237. #endif
  238. #endif // Z_DUAL_STEPPER_DRIVERS
  239. // Enable this for dual x-carriage printers.
  240. // A dual x-carriage design has the advantage that the inactive extruder can be parked which
  241. // prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage
  242. // allowing faster printing speeds. Connect your X2 stepper to the first unused E plug.
  243. //#define DUAL_X_CARRIAGE
  244. #if ENABLED(DUAL_X_CARRIAGE)
  245. // Configuration for second X-carriage
  246. // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
  247. // the second x-carriage always homes to the maximum endstop.
  248. #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
  249. #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
  250. #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
  251. #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
  252. // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software
  253. // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
  254. // without modifying the firmware (through the "M218 T1 X???" command).
  255. // Remember: you should set the second extruder x-offset to 0 in your slicer.
  256. // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
  257. // Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
  258. // as long as it supports dual x-carriages. (M605 S0)
  259. // Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
  260. // that additional slicer support is not required. (M605 S1)
  261. // Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
  262. // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
  263. // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
  264. // This is the default power-up mode which can be later using M605.
  265. #define DEFAULT_DUAL_X_CARRIAGE_MODE 0
  266. // Default settings in "Auto-park Mode"
  267. #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
  268. #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
  269. // Default x offset in duplication mode (typically set to half print bed width)
  270. #define DEFAULT_DUPLICATION_X_OFFSET 100
  271. #endif //DUAL_X_CARRIAGE
  272. // @section homing
  273. //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
  274. #define X_HOME_BUMP_MM 5
  275. #define Y_HOME_BUMP_MM 5
  276. #define Z_HOME_BUMP_MM 2
  277. #define HOMING_BUMP_DIVISOR {4, 4, 8} // Re-Bump Speed Divisor (Divides the Homing Feedrate)
  278. #define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
  279. // When G28 is called, this option will make Y home before X
  280. //#define HOME_Y_BEFORE_X
  281. // @section machine
  282. #define AXIS_RELATIVE_MODES {false, false, false, false}
  283. //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
  284. #define INVERT_X_STEP_PIN false
  285. #define INVERT_Y_STEP_PIN false
  286. #define INVERT_Z_STEP_PIN false
  287. #define INVERT_E_STEP_PIN false
  288. // Default stepper release if idle. Set to 0 to deactivate.
  289. // Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true.
  290. // Time can be set by M18 and M84.
  291. #define DEFAULT_STEPPER_DEACTIVE_TIME 60
  292. #define DISABLE_INACTIVE_X true
  293. #define DISABLE_INACTIVE_Y true
  294. #define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished.
  295. #define DISABLE_INACTIVE_E true
  296. #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate
  297. #define DEFAULT_MINTRAVELFEEDRATE 0.0
  298. // @section lcd
  299. #if ENABLED(ULTIPANEL)
  300. #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
  301. #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
  302. #endif
  303. // @section extras
  304. // minimum time in microseconds that a movement needs to take if the buffer is emptied.
  305. #define DEFAULT_MINSEGMENTTIME 20000
  306. // If defined the movements slow down when the look ahead buffer is only half full
  307. #define SLOWDOWN
  308. // Frequency limit
  309. // See nophead's blog for more info
  310. // Not working O
  311. //#define XY_FREQUENCY_LIMIT 15
  312. // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
  313. // of the buffer and all stops. This should not be much greater than zero and should only be changed
  314. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
  315. #define MINIMUM_PLANNER_SPEED 0.05// (mm/sec)
  316. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
  317. #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
  318. // Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards)
  319. #define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
  320. // Motor Current controlled via PWM (Overridable on supported boards with PWM-driven motor driver current)
  321. //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
  322. // uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
  323. //#define DIGIPOT_I2C
  324. // Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8
  325. #define DIGIPOT_I2C_NUM_CHANNELS 8
  326. // actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
  327. #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}
  328. //===========================================================================
  329. //=============================Additional Features===========================
  330. //===========================================================================
  331. #define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
  332. #define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
  333. #define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
  334. //#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
  335. #define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
  336. // @section lcd
  337. // Include a page of printer information in the LCD Main Menu
  338. //#define LCD_INFO_MENU
  339. #if ENABLED(SDSUPPORT)
  340. // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
  341. // around this by connecting a push button or single throw switch to the pin defined
  342. // as SD_DETECT_PIN in your board's pins definitions.
  343. // This setting should be disabled unless you are using a push button, pulling the pin to ground.
  344. // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
  345. #define SD_DETECT_INVERTED
  346. #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
  347. #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
  348. #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
  349. // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
  350. // using:
  351. #define MENU_ADDAUTOSTART
  352. // Show a progress bar on HD44780 LCDs for SD printing
  353. #define LCD_PROGRESS_BAR
  354. #if ENABLED(LCD_PROGRESS_BAR)
  355. // Amount of time (ms) to show the bar
  356. #define PROGRESS_BAR_BAR_TIME 2000
  357. // Amount of time (ms) to show the status message
  358. #define PROGRESS_BAR_MSG_TIME 3000
  359. // Amount of time (ms) to retain the status message (0=forever)
  360. #define PROGRESS_MSG_EXPIRE 0
  361. // Enable this to show messages for MSG_TIME then hide them
  362. //#define PROGRESS_MSG_ONCE
  363. #endif
  364. // This allows hosts to request long names for files and folders with M33
  365. #define LONG_FILENAME_HOST_SUPPORT
  366. // This option allows you to abort SD printing when any endstop is triggered.
  367. // This feature must be enabled with "M540 S1" or from the LCD menu.
  368. // To have any effect, endstops must be enabled during SD printing.
  369. // With ENDSTOPS_ONLY_FOR_HOMING you must send "M120" to enable endstops.
  370. //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
  371. #endif // SDSUPPORT
  372. // for dogm lcd displays you can choose some additional fonts:
  373. #if ENABLED(DOGLCD)
  374. // save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT
  375. // we don't have a big font for Cyrillic, Kana
  376. //#define USE_BIG_EDIT_FONT
  377. // If you have spare 2300Byte of progmem and want to use a
  378. // smaller font on the Info-screen uncomment the next line.
  379. //#define USE_SMALL_INFOFONT
  380. #endif // DOGLCD
  381. // @section safety
  382. // The hardware watchdog should reset the microcontroller disabling all outputs,
  383. // in case the firmware gets stuck and doesn't do temperature regulation.
  384. #define USE_WATCHDOG
  385. #if ENABLED(USE_WATCHDOG)
  386. // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on.
  387. // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset.
  388. // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled.
  389. //#define WATCHDOG_RESET_MANUAL
  390. #endif
  391. // @section lcd
  392. // Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
  393. // it can e.g. be used to change z-positions in the print startup phase in real-time
  394. // does not respect endstops!
  395. #define BABYSTEPPING
  396. #if ENABLED(BABYSTEPPING)
  397. #define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions
  398. //not implemented for deltabots!
  399. #define BABYSTEP_INVERT_Z false //true for inverse movements in Z
  400. #define BABYSTEP_MULTIPLICATOR 1 //faster movements
  401. #endif
  402. // @section extruder
  403. // extruder advance constant (s2/mm3)
  404. //
  405. // advance (steps) = STEPS_PER_CUBIC_MM_E * EXTRUDER_ADVANCE_K * cubic mm per second ^ 2
  406. //
  407. // Hooke's law says: force = k * distance
  408. // Bernoulli's principle says: v ^ 2 / 2 + g . h + pressure / density = constant
  409. // so: v ^ 2 is proportional to number of steps we advance the extruder
  410. //#define ADVANCE
  411. #if ENABLED(ADVANCE)
  412. #define EXTRUDER_ADVANCE_K .0
  413. #define D_FILAMENT 2.85
  414. #endif
  415. // Implementation of a linear pressure control
  416. // Assumption: advance = k * (delta velocity)
  417. // K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
  418. //#define LIN_ADVANCE
  419. #if ENABLED(LIN_ADVANCE)
  420. #define LIN_ADVANCE_K 75
  421. #endif
  422. // @section leveling
  423. // Default mesh area is an area with an inset margin on the print area.
  424. // Below are the macros that are used to define the borders for the mesh area,
  425. // made available here for specialized needs, ie dual extruder setup.
  426. #if ENABLED(MESH_BED_LEVELING)
  427. #define MESH_MIN_X (X_MIN_POS + MESH_INSET)
  428. #define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
  429. #define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
  430. #define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
  431. #endif
  432. // @section extras
  433. // Arc interpretation settings:
  434. #define ARC_SUPPORT // Disabling this saves ~2738 bytes
  435. #define MM_PER_ARC_SEGMENT 1
  436. #define N_ARC_CORRECTION 25
  437. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
  438. //#define BEZIER_CURVE_SUPPORT
  439. const unsigned int dropsegments = 2; //everything with less than this number of steps will be ignored as move and joined with the next movement
  440. // @section temperature
  441. // Control heater 0 and heater 1 in parallel.
  442. //#define HEATERS_PARALLEL
  443. //===========================================================================
  444. //================================= Buffers =================================
  445. //===========================================================================
  446. // @section hidden
  447. // The number of linear motions that can be in the plan at any give time.
  448. // THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
  449. #if ENABLED(SDSUPPORT)
  450. #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
  451. #else
  452. #define BLOCK_BUFFER_SIZE 32 // maximize block buffer
  453. #endif
  454. // @section serial
  455. // The ASCII buffer for serial input
  456. #define MAX_CMD_SIZE 96
  457. #define BUFSIZE 4
  458. // Set Transfer-Buffer-Size by uncommenting the next define. Default size is 32byte.
  459. // :[0,2,4,8,16,32,64,128,256]. To save 386byte of PROGMEM and (3 + TX_BUFFER_SIZE) bytes of RAM set TX_BUFFER_SIZE to 0
  460. // To buffer a simple "ok" you need 4 byte, for ADVANCED_OK/M105 you need 32 and for debug-echo: 128 byte to get the optimal speed.
  461. // Any other output does not need to be that speedy.
  462. #define TX_BUFFER_SIZE 0
  463. // Enable an emergency-command parser to intercept certain commands as they
  464. // enter the serial receive buffer, so they cannot be blocked.
  465. // Currently handles M108, M112, M410
  466. // Does not work on boards using AT90USB (USBCON) processors!
  467. //#define EMERGENCY_PARSER
  468. // Bad Serial-connections can miss a received command by sending an 'ok'
  469. // Therefore some clients abort after 30 seconds in a timeout.
  470. // Some other clients start sending commands while receiving a 'wait'.
  471. // This "wait" is only sent when the buffer is empty. 1 second is a good value here.
  472. //#define NO_TIMEOUTS 1000 // Milliseconds
  473. // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
  474. //#define ADVANCED_OK
  475. // @section fwretract
  476. // Firmware based and LCD controlled retract
  477. // M207 and M208 can be used to define parameters for the retraction.
  478. // The retraction can be called by the slicer using G10 and G11
  479. // until then, intended retractions can be detected by moves that only extrude and the direction.
  480. // the moves are than replaced by the firmware controlled ones.
  481. //#define FWRETRACT //ONLY PARTIALLY TESTED
  482. #if ENABLED(FWRETRACT)
  483. #define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt
  484. #define RETRACT_LENGTH 3 //default retract length (positive mm)
  485. #define RETRACT_LENGTH_SWAP 13 //default swap retract length (positive mm), for extruder change
  486. #define RETRACT_FEEDRATE 45 //default feedrate for retracting (mm/s)
  487. #define RETRACT_ZLIFT 0 //default retract Z-lift
  488. #define RETRACT_RECOVER_LENGTH 0 //default additional recover length (mm, added to retract length when recovering)
  489. #define RETRACT_RECOVER_LENGTH_SWAP 0 //default additional swap recover length (mm, added to retract length when recovering from extruder change)
  490. #define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s)
  491. #endif
  492. // Add support for experimental filament exchange support M600; requires display
  493. #if ENABLED(ULTIPANEL)
  494. // #define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too)
  495. #if ENABLED(FILAMENT_CHANGE_FEATURE)
  496. #define FILAMENT_CHANGE_X_POS 3 // X position of hotend
  497. #define FILAMENT_CHANGE_Y_POS 3 // Y position of hotend
  498. #define FILAMENT_CHANGE_Z_ADD 10 // Z addition of hotend (lift)
  499. #define FILAMENT_CHANGE_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
  500. #define FILAMENT_CHANGE_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers)
  501. #define FILAMENT_CHANGE_RETRACT_LENGTH 2 // Initial retract in mm
  502. // It is a short retract used immediately after print interrupt before move to filament exchange position
  503. #define FILAMENT_CHANGE_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
  504. #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
  505. // Longer length for bowden printers to unload filament from whole bowden tube,
  506. // shorter lenght for printers without bowden to unload filament from extruder only,
  507. // 0 to disable unloading for manual unloading
  508. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
  509. #define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
  510. // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
  511. // Short or zero length for printers without bowden where loading is not used
  512. #define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
  513. #define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend,
  514. // 0 to disable for manual extrusion
  515. // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
  516. // or until outcoming filament color is not clear for filament color change
  517. #define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
  518. #endif
  519. #endif
  520. /******************************************************************************\
  521. * enable this section if you have TMC26X motor drivers.
  522. * you need to import the TMC26XStepper library into the Arduino IDE for this
  523. ******************************************************************************/
  524. // @section tmc
  525. //#define HAVE_TMCDRIVER
  526. #if ENABLED(HAVE_TMCDRIVER)
  527. //#define X_IS_TMC
  528. #define X_MAX_CURRENT 1000 //in mA
  529. #define X_SENSE_RESISTOR 91 //in mOhms
  530. #define X_MICROSTEPS 16 //number of microsteps
  531. //#define X2_IS_TMC
  532. #define X2_MAX_CURRENT 1000 //in mA
  533. #define X2_SENSE_RESISTOR 91 //in mOhms
  534. #define X2_MICROSTEPS 16 //number of microsteps
  535. //#define Y_IS_TMC
  536. #define Y_MAX_CURRENT 1000 //in mA
  537. #define Y_SENSE_RESISTOR 91 //in mOhms
  538. #define Y_MICROSTEPS 16 //number of microsteps
  539. //#define Y2_IS_TMC
  540. #define Y2_MAX_CURRENT 1000 //in mA
  541. #define Y2_SENSE_RESISTOR 91 //in mOhms
  542. #define Y2_MICROSTEPS 16 //number of microsteps
  543. //#define Z_IS_TMC
  544. #define Z_MAX_CURRENT 1000 //in mA
  545. #define Z_SENSE_RESISTOR 91 //in mOhms
  546. #define Z_MICROSTEPS 16 //number of microsteps
  547. //#define Z2_IS_TMC
  548. #define Z2_MAX_CURRENT 1000 //in mA
  549. #define Z2_SENSE_RESISTOR 91 //in mOhms
  550. #define Z2_MICROSTEPS 16 //number of microsteps
  551. //#define E0_IS_TMC
  552. #define E0_MAX_CURRENT 1000 //in mA
  553. #define E0_SENSE_RESISTOR 91 //in mOhms
  554. #define E0_MICROSTEPS 16 //number of microsteps
  555. //#define E1_IS_TMC
  556. #define E1_MAX_CURRENT 1000 //in mA
  557. #define E1_SENSE_RESISTOR 91 //in mOhms
  558. #define E1_MICROSTEPS 16 //number of microsteps
  559. //#define E2_IS_TMC
  560. #define E2_MAX_CURRENT 1000 //in mA
  561. #define E2_SENSE_RESISTOR 91 //in mOhms
  562. #define E2_MICROSTEPS 16 //number of microsteps
  563. //#define E3_IS_TMC
  564. #define E3_MAX_CURRENT 1000 //in mA
  565. #define E3_SENSE_RESISTOR 91 //in mOhms
  566. #define E3_MICROSTEPS 16 //number of microsteps
  567. #endif
  568. /******************************************************************************\
  569. * enable this section if you have L6470 motor drivers.
  570. * you need to import the L6470 library into the Arduino IDE for this
  571. ******************************************************************************/
  572. // @section l6470
  573. //#define HAVE_L6470DRIVER
  574. #if ENABLED(HAVE_L6470DRIVER)
  575. //#define X_IS_L6470
  576. #define X_MICROSTEPS 16 //number of microsteps
  577. #define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
  578. #define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
  579. #define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall
  580. //#define X2_IS_L6470
  581. #define X2_MICROSTEPS 16 //number of microsteps
  582. #define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
  583. #define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
  584. #define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
  585. //#define Y_IS_L6470
  586. #define Y_MICROSTEPS 16 //number of microsteps
  587. #define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
  588. #define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
  589. #define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall
  590. //#define Y2_IS_L6470
  591. #define Y2_MICROSTEPS 16 //number of microsteps
  592. #define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
  593. #define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
  594. #define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
  595. //#define Z_IS_L6470
  596. #define Z_MICROSTEPS 16 //number of microsteps
  597. #define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
  598. #define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
  599. #define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall
  600. //#define Z2_IS_L6470
  601. #define Z2_MICROSTEPS 16 //number of microsteps
  602. #define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
  603. #define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
  604. #define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
  605. //#define E0_IS_L6470
  606. #define E0_MICROSTEPS 16 //number of microsteps
  607. #define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
  608. #define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
  609. #define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall
  610. //#define E1_IS_L6470
  611. #define E1_MICROSTEPS 16 //number of microsteps
  612. #define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
  613. #define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
  614. #define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall
  615. //#define E2_IS_L6470
  616. #define E2_MICROSTEPS 16 //number of microsteps
  617. #define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
  618. #define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
  619. #define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
  620. //#define E3_IS_L6470
  621. #define E3_MICROSTEPS 16 //number of microsteps
  622. #define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
  623. #define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
  624. #define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall
  625. #endif
  626. /**
  627. * TWI/I2C BUS
  628. *
  629. * This feature is an EXPERIMENTAL feature so it shall not be used on production
  630. * machines. Enabling this will allow you to send and receive I2C data from slave
  631. * devices on the bus.
  632. *
  633. * ; Example #1
  634. * ; This macro send the string "Marlin" to the slave device with address 0x63 (99)
  635. * ; It uses multiple M155 commands with one B<base 10> arg
  636. * M155 A99 ; Target slave address
  637. * M155 B77 ; M
  638. * M155 B97 ; a
  639. * M155 B114 ; r
  640. * M155 B108 ; l
  641. * M155 B105 ; i
  642. * M155 B110 ; n
  643. * M155 S1 ; Send the current buffer
  644. *
  645. * ; Example #2
  646. * ; Request 6 bytes from slave device with address 0x63 (99)
  647. * M156 A99 B5
  648. *
  649. * ; Example #3
  650. * ; Example serial output of a M156 request
  651. * echo:i2c-reply: from:99 bytes:5 data:hello
  652. */
  653. // @section i2cbus
  654. //#define EXPERIMENTAL_I2CBUS
  655. #include "Conditionals.h"
  656. #include "SanityCheck.h"
  657. #endif //CONFIGURATION_ADV_H