My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Вы не можете выбрать более 25 тем Темы должны начинаться с буквы или цифры, могут содержать дефисы(-) и должны содержать не более 35 символов.

pins_ELEFU_3.h 4.5KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Elefu RA Board Pin Assignments
  24. */
  25. #ifndef __AVR_ATmega2560__
  26. #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
  27. #endif
  28. #define BOARD_NAME "Elefu Ra v3"
  29. #define X_STEP_PIN 49
  30. #define X_DIR_PIN 13
  31. #define X_ENABLE_PIN 48
  32. #define X_MIN_PIN 35
  33. #define X_MAX_PIN 34
  34. #define Y_STEP_PIN 11
  35. #define Y_DIR_PIN 9
  36. #define Y_ENABLE_PIN 12
  37. #define Y_MIN_PIN 33
  38. #define Y_MAX_PIN 32
  39. #define Z_STEP_PIN 7
  40. #define Z_DIR_PIN 6
  41. #define Z_ENABLE_PIN 8
  42. #define Z_MIN_PIN 31
  43. #define Z_MAX_PIN 30
  44. #define E2_STEP_PIN 43
  45. #define E2_DIR_PIN 47
  46. #define E2_ENABLE_PIN 42
  47. #define E1_STEP_PIN 18
  48. #define E1_DIR_PIN 19
  49. #define E1_ENABLE_PIN 38
  50. #define E0_STEP_PIN 40
  51. #define E0_DIR_PIN 41
  52. #define E0_ENABLE_PIN 37
  53. #define FAN_PIN 16 //5V PWM
  54. #define PS_ON_PIN 10 //Set to -1 if using a manual switch on the PWRSW Connector
  55. #define SLEEP_WAKE_PIN 26 //This feature still needs work
  56. #define HEATER_0_PIN 45 //12V PWM1
  57. #define HEATER_1_PIN 46 //12V PWM2
  58. #define HEATER_2_PIN 17 //12V PWM3
  59. #define HEATER_BED_PIN 44 //DOUBLE 12V PWM
  60. #define TEMP_0_PIN 3 //ANALOG NUMBERING
  61. #define TEMP_1_PIN 2 //ANALOG NUMBERING
  62. #define TEMP_2_PIN 1 //ANALOG NUMBERING
  63. #define TEMP_BED_PIN 0 //ANALOG NUMBERING
  64. #define BEEPER_PIN 36
  65. // M240 Triggers a camera by emulating a Canon RC-1 Remote
  66. // Data from: http://www.doc-diy.net/photo/rc-1_hacked/
  67. #define PHOTOGRAPH_PIN 29
  68. #if ENABLED(RA_CONTROL_PANEL)
  69. #define SDSS 53
  70. #define SD_DETECT_PIN 28
  71. #define BTN_EN1 14
  72. #define BTN_EN2 39
  73. #define BTN_ENC 15 //the click
  74. #define BLEN_C 2
  75. #define BLEN_B 1
  76. #define BLEN_A 0
  77. #endif // RA_CONTROL_PANEL
  78. #if ENABLED(RA_DISCO)
  79. //variables for which pins the TLC5947 is using
  80. #define TLC_CLOCK_PIN 25
  81. #define TLC_BLANK_PIN 23
  82. #define TLC_XLAT_PIN 22
  83. #define TLC_DATA_PIN 24
  84. //We also need to define pin to port number mapping for the 2560 to match the pins listed above. If you change the TLC pins, update this as well per the 2560 datasheet!
  85. //This currently only works with the RA Board.
  86. #define TLC_CLOCK_BIT 3 //bit 3 on port A
  87. #define TLC_CLOCK_PORT &PORTA //bit 3 on port A
  88. #define TLC_BLANK_BIT 1 //bit 1 on port A
  89. #define TLC_BLANK_PORT &PORTA //bit 1 on port A
  90. #define TLC_DATA_BIT 2 //bit 2 on port A
  91. #define TLC_DATA_PORT &PORTA //bit 2 on port A
  92. #define TLC_XLAT_BIT 0 //bit 0 on port A
  93. #define TLC_XLAT_PORT &PORTA //bit 0 on port A
  94. //change this to match your situation. Lots of TLCs takes up the arduino SRAM very quickly, so be careful
  95. //Leave it at at least 1 if you have enabled RA_LIGHTING
  96. //The number of TLC5947 boards chained together for use with the animation, additional ones will repeat the animation on them, but are not individually addressable and mimic those before them. You can leave the default at 2 even if you only have 1 TLC5947 module.
  97. #define NUM_TLCS 2
  98. //These TRANS_ARRAY values let you change the order the LEDs on the lighting modules will animate for chase functions.
  99. //Modify them according to your specific situation.
  100. //NOTE: the array should be 8 long for every TLC you have. These defaults assume (2) TLCs.
  101. #define TRANS_ARRAY {0, 1, 2, 3, 4, 5, 6, 7, 15, 14, 13, 12, 11, 10, 9, 8} //forwards
  102. //#define TRANS_ARRAY {7, 6, 5, 4, 3, 2, 1, 0, 8, 9, 10, 11, 12, 13, 14, 15} //backwards
  103. #endif // RA_DISCO