123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- #include "../inc/MarlinConfigPre.h"
- #include "../module/planner.h"
-
- constexpr uint8_t all_on = 0xFF, all_off = 0x00;
-
- class Backlash {
- public:
- #if ENABLED(BACKLASH_GCODE)
- static xyz_float_t distance_mm;
- static uint8_t correction;
- #ifdef BACKLASH_SMOOTHING_MM
- static float smoothing_mm;
- #endif
-
- static inline void set_correction(const float &v) { correction = _MAX(0, _MIN(1.0, v)) * all_on; }
- static inline float get_correction() { return float(ui8_to_percent(correction)) / 100.0f; }
- #else
- static constexpr uint8_t correction = (BACKLASH_CORRECTION) * 0xFF;
- static const xyz_float_t distance_mm;
- #ifdef BACKLASH_SMOOTHING_MM
- static constexpr float smoothing_mm = BACKLASH_SMOOTHING_MM;
- #endif
- #endif
-
- #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING)
- private:
- static xyz_float_t measured_mm;
- static xyz_uint8_t measured_count;
- public:
- static void measure_with_probe();
- #endif
-
- static inline float get_measurement(const AxisEnum a) {
- // Return the measurement averaged over all readings
- return (
- #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING)
- measured_count[a] > 0 ? measured_mm[a] / measured_count[a] :
- #endif
- 0
- );
- #if DISABLED(MEASURE_BACKLASH_WHEN_PROBING)
- UNUSED(a);
- #endif
- }
-
- static inline bool has_measurement(const AxisEnum a) {
- return (false
- #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING)
- || (measured_count[a] > 0)
- #endif
- );
- #if DISABLED(MEASURE_BACKLASH_WHEN_PROBING)
- UNUSED(a);
- #endif
- }
-
- static inline bool has_any_measurement() {
- return has_measurement(X_AXIS) || has_measurement(Y_AXIS) || has_measurement(Z_AXIS);
- }
-
- void add_correction_steps(const int32_t &da, const int32_t &db, const int32_t &dc, const uint8_t dm, block_t * const block);
- };
-
- extern Backlash backlash;
|