123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- #ifndef __STM32F1__
- #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
- #endif
-
- #define BOARD_INFO_NAME "FYSETC AIO II"
- #define BOARD_WEBSITE_URL "fysetc.com"
-
- #define DISABLE_JTAG
-
- #define pins_v2_20190128 // geo-f:add for new pins define
-
- // Ignore temp readings during development.
- //#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
-
- //
- // Flash EEPROM Emulation
- //
- #define FLASH_EEPROM_EMULATION
- #define EEPROM_PAGE_SIZE uint16(0x800) // 2KB
- #define EEPROM_START_ADDRESS uint32(0x8000000 + 256 * 1024 - 2 * EEPROM_PAGE_SIZE)
- #undef E2END
- #define E2END (EEPROM_PAGE_SIZE - 1) // 2KB
- //
- // Limit Switches
- //
- #define X_STOP_PIN PA1
- #define Y_STOP_PIN PA0
- #define Z_STOP_PIN PB14
-
- //
- // Filament runout
- //
- #ifdef pins_v2_20190128
- #define FIL_RUNOUT_PIN PB15
- #else
- #define FIL_RUNOUT_PIN PB5
- #endif
-
- //
- // Steppers
- //
- #define X_STEP_PIN PB8
- #define X_DIR_PIN PB9
- #define X_ENABLE_PIN PA8
-
- #define Y_STEP_PIN PB2
- #ifdef pins_v2_20190128
- #define Y_DIR_PIN PB3
- #else
- #define Y_DIR_PIN PB0
- #endif
- #define Y_ENABLE_PIN PB1
-
- #define Z_STEP_PIN PC0
- #define Z_DIR_PIN PC1
- #define Z_ENABLE_PIN PC2
-
- #define E0_STEP_PIN PC15
- #define E0_DIR_PIN PC14
- #define E0_ENABLE_PIN PC13
-
- //
- // Stepper current PWM
- //
-
- // X:PA2 Y:PA3 Z:PB12 E:PB13 // changed for test
- //#define MOTOR_CURRENT_PWM_XY_PIN PA3
- //#define MOTOR_CURRENT_PWM_Z_PIN PA2 // PB12
- //#define MOTOR_CURRENT_PWM_XY_PIN PB6
- //#define MOTOR_CURRENT_PWM_Z_PIN PB7 // PB12
- //#define MOTOR_CURRENT_PWM_E_PIN -1 // PB13
- // Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
- #ifndef MOTOR_CURRENT_PWM_RANGE
- #define MOTOR_CURRENT_PWM_RANGE 1500 // geo-f:old 2000
- #endif
- #define DEFAULT_PWM_MOTOR_CURRENT {500, 500, 400} // geo-f:old 1300 1300 1250
-
- // 采用 SDIO PCB从左到右数
- // 1:PC10 - SDIO_D2
- // 2:PC11 - SDIO_D3
- // 3:PD2 - SDIO_CMD
- // 4:VCC
- // 5:PC12 - SDIO_CK
- // 6:VDD
- // 7:PC8 - SDIO_D0
- // 8:PC9 - SDIO_D1
- // 9:PA15 - SD_DETECT_PIN
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN PC7
- #define HEATER_BED_PIN PC6
- #ifndef FAN_PIN
- #define FAN_PIN PC8
- #endif
-
- //
- // Temperature Sensors
- //
- #define TEMP_BED_PIN PC5 // Analog Input
- #define TEMP_0_PIN PC4 // Analog Input
-
- //
- // Misc. Functions
- //
- #define SDSS PA4
-
- //
- // LCD Pins
- //
- #if HAS_SPI_LCD
-
- #define BEEPER_PIN PC9
-
- #if HAS_GRAPHICAL_LCD
-
- #define DOGLCD_A0 PA15
- #ifdef pins_v2_20190128
- #define DOGLCD_CS PB5
- #else
- #define DOGLCD_CS PB7
- #endif
-
- //#define LCD_CONTRAST_INIT 190
- //#define LCD_SCREEN_ROT_90
- //#define LCD_SCREEN_ROT_180
- //#define LCD_SCREEN_ROT_270
-
- #endif
-
- // not connected to a pin
- #define SD_DETECT_PIN PC3
-
- #if ENABLED(NEWPANEL)
- // The encoder and click button
- #define BTN_EN1 PC10
- #define BTN_EN2 PC11
- #define BTN_ENC PC12
- #endif
-
- #ifdef pins_v2_20190128
- #define LCD_RESET_PIN PB4
- #ifndef RGB_LED_R_PIN
- #define RGB_LED_R_PIN PB0
- #endif
- #ifndef RGB_LED_G_PIN
- #define RGB_LED_G_PIN PB6
- #endif
- #ifndef RGB_LED_B_PIN
- #define RGB_LED_B_PIN PB7
- #endif
- #else
- #define LCD_RESET_PIN PB6
- #ifndef RGB_LED_R_PIN
- #define RGB_LED_R_PIN PB3
- #endif
- #ifndef RGB_LED_G_PIN
- #define RGB_LED_G_PIN PB4
- #endif
- #ifndef RGB_LED_B_PIN
- #define RGB_LED_B_PIN PB5
- #endif
- #endif
-
- #endif
|