marlin/buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/variant.h

/*
  Copyright (c) 2011 Arduino.  All right reserved.

  This library is free software; you can redistribute it and/or
  modify it under the terms of the GNU Lesser General Public
  License as published by the Free Software Foundation; either
  version 2.1 of the License, or (at your option) any later version.

  This library is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  See the GNU Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General Public
  License along with this library; if not, write to the Free Software
  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
*/

#ifndef _VARIANT_ARDUINO_STM32_
#define _VARIANT_ARDUINO_STM32_

#ifdef __cplusplus
extern "C" {
#endif // __cplusplus

/*----------------------------------------------------------------------------
 *        Pins
 *----------------------------------------------------------------------------*/


#define PA0   0  //D0
#define PA1   1  //D1
#define PA2   2  //D2
#define PA3   3  //D3
#define PA4   4  //D4
#define PA5   5  //D5
#define PA6   6  //D6
#define PA7   7  //D7
#define PA8   8  //D8
#define PA9   9  //D9
#define PA10  10 //D10
#define PA11  11 //D11
#define PA12  12 //D12
#define PA13  13 //D13
#define PA14  14 //D14
#define PA15  15 //D15
#define PB0   16 //D16
#define PB1   17 //D17
#define PB2   18 //D18
#define PB3   19 //D19
#define PB4   20 //D20
#define PB5   21 //D21
#define PB6   22 //D22
#define PB7   23 //D23
#define PB8   24 //D24
#define PB9   25 //D25
#define PB10  26 //D26
#define PB12  27 //D27
#define PB13  28 //D28
#define PB14  29 //D29
#define PB15  30 //D30
#define PC0   31 //D31
#define PC1   32 //D32
#define PC2   33 //D33
#define PC3   34 //D34
#define PC4   35 //D35
#define PC5   36 //D36
#define PC6   37 //D37
#define PC7   38 //D38
#define PC8   39 //D39
#define PC9   40 //D40
#define PC10  41 //D41
#define PC11  42 //D42
#define PC12  43 //D43
#define PC13  44 //D44
#define PC14  45 //D45
#define PC15  46 //D46
#define PD2   47 //D47
#define PH0   48 //D48
#define PH1   49 //D49

// This must be a literal
#define NUM_DIGITAL_PINS        66
// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
#define NUM_ANALOG_INPUTS       16
#define NUM_ANALOG_FIRST        50

/*
// PWM resolution
#define PWM_RESOLUTION          8
#define PWM_FREQUENCY           20000 // >= 20 Khz => inaudible noise for fans
#define PWM_MAX_DUTY_CYCLE      255
*/

// SPI Definitions
#define PIN_SPI_MOSI            PC12
#define PIN_SPI_MISO            PC11
#define PIN_SPI_SCK             PC10
#define PIN_SPI_SS              PA15

// Timer Definitions
// TIM1  - Hardware PWM (HB)
// TIM2  - TIMER_SERVO
// TIM3  - Hardware PWM (FAN0/1/2, HE0)
// TIM4  - Hardware PWM (LED_R/G/B)
// TIM5  - TIMER_TONE
// TIM9  - STEP_TIMER
// TIM10 - TEMP_TIMER
// TIM11 -
#define TIMER_SERVO             TIM2  // TIMER_SERVO must be defined in this file
#define TIMER_TONE              TIM5  // TIMER_TONE must be defined in this file

// UART Definitions
#define SERIAL_UART_INSTANCE    1

// Default pin used for 'Serial' instance (ex: ST-Link)
// Mandatory for Firmata
#define PIN_SERIAL_RX           PA10
#define PIN_SERIAL_TX           PA9

#ifdef __cplusplus
} // extern "C"
#endif
/*----------------------------------------------------------------------------
 *        Arduino objects - C++ only
 *----------------------------------------------------------------------------*/

#ifdef __cplusplus
// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
//                            pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR     Serial
#define SERIAL_PORT_HARDWARE    Serial
#endif

#endif /* _VARIANT_ARDUINO_STM32_ */