My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Vous ne pouvez pas sélectionner plus de 25 sujets Les noms de sujets doivent commencer par une lettre ou un nombre, peuvent contenir des tirets ('-') et peuvent comporter jusqu'à 35 caractères.

language.h 58KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310
  1. #ifndef LANGUAGE_H
  2. #define LANGUAGE_H
  3. // NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES
  4. //
  5. // ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h"
  6. // ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
  7. // Languages
  8. // 1 English
  9. // 2 Polish
  10. // 3 French (awaiting translation!)
  11. // 4 German
  12. // 5 Spanish
  13. // 6 Russian
  14. // 7 Italian
  15. // 8 Portuguese
  16. #define LANGUAGE_CHOICE 1 // Pick your language from the list above
  17. #define PROTOCOL_VERSION "1.0"
  18. #if MOTHERBOARD == 7 || MOTHERBOARD == 71
  19. #define MACHINE_NAME "Ultimaker"
  20. #define FIRMWARE_URL "http://firmware.ultimaker.com"
  21. #else
  22. #define MACHINE_NAME "Mendel"
  23. #define FIRMWARE_URL "http://www.mendel-parts.com"
  24. #endif
  25. #define STRINGIFY_(n) #n
  26. #define STRINGIFY(n) STRINGIFY_(n)
  27. #if LANGUAGE_CHOICE == 1
  28. // LCD Menu Messages
  29. #define WELCOME_MSG MACHINE_NAME " Ready."
  30. #define MSG_SD_INSERTED "Card inserted"
  31. #define MSG_SD_REMOVED "Card removed"
  32. #define MSG_MAIN " Main \003"
  33. #define MSG_AUTOSTART " Autostart"
  34. #define MSG_DISABLE_STEPPERS " Disable Steppers"
  35. #define MSG_AUTO_HOME " Auto Home"
  36. #define MSG_SET_ORIGIN " Set Origin"
  37. #define MSG_PREHEAT_PLA " Preheat PLA"
  38. #define MSG_PREHEAT_PLA_SETTINGS " Preheat PLA Setting"
  39. #define MSG_PREHEAT_ABS " Preheat ABS"
  40. #define MSG_PREHEAT_ABS_SETTINGS " Preheat ABS Setting"
  41. #define MSG_COOLDOWN " Cooldown"
  42. #define MSG_EXTRUDE " Extrude"
  43. #define MSG_RETRACT " Retract"
  44. #define MSG_PREHEAT_PLA " Preheat PLA"
  45. #define MSG_PREHEAT_ABS " Preheat ABS"
  46. #define MSG_MOVE_AXIS " Move Axis \x7E"
  47. #define MSG_SPEED " Speed:"
  48. #define MSG_NOZZLE " \002Nozzle:"
  49. #define MSG_NOZZLE1 " \002Nozzle2:"
  50. #define MSG_NOZZLE2 " \002Nozzle3:"
  51. #define MSG_BED " \002Bed:"
  52. #define MSG_FAN_SPEED " Fan speed:"
  53. #define MSG_FLOW " Flow:"
  54. #define MSG_CONTROL " Control \003"
  55. #define MSG_MIN " \002 Min:"
  56. #define MSG_MAX " \002 Max:"
  57. #define MSG_FACTOR " \002 Fact:"
  58. #define MSG_AUTOTEMP " Autotemp:"
  59. #define MSG_ON "On "
  60. #define MSG_OFF "Off"
  61. #define MSG_PID_P " PID-P: "
  62. #define MSG_PID_I " PID-I: "
  63. #define MSG_PID_D " PID-D: "
  64. #define MSG_PID_C " PID-C: "
  65. #define MSG_ACC " Acc:"
  66. #define MSG_VXY_JERK " Vxy-jerk: "
  67. #define MSG_VMAX " Vmax "
  68. #define MSG_X "x:"
  69. #define MSG_Y "y:"
  70. #define MSG_Z "z:"
  71. #define MSG_E "e:"
  72. #define MSG_VMIN " Vmin:"
  73. #define MSG_VTRAV_MIN " VTrav min:"
  74. #define MSG_AMAX " Amax "
  75. #define MSG_A_RETRACT " A-retract:"
  76. #define MSG_XSTEPS " Xsteps/mm:"
  77. #define MSG_YSTEPS " Ysteps/mm:"
  78. #define MSG_ZSTEPS " Zsteps/mm:"
  79. #define MSG_ESTEPS " Esteps/mm:"
  80. #define MSG_MAIN_WIDE " Main \003"
  81. #define MSG_RECTRACT_WIDE " Rectract \x7E"
  82. #define MSG_TEMPERATURE_WIDE " Temperature \x7E"
  83. #define MSG_TEMPERATURE_RTN " Temperature \003"
  84. #define MSG_MOTION_WIDE " Motion \x7E"
  85. #define MSG_STORE_EPROM " Store memory"
  86. #define MSG_LOAD_EPROM " Load memory"
  87. #define MSG_RESTORE_FAILSAFE " Restore Failsafe"
  88. #define MSG_REFRESH "\004Refresh"
  89. #define MSG_WATCH " Watch \003"
  90. #define MSG_PREPARE " Prepare \x7E"
  91. #define MSG_PREPARE_ALT " Prepare \003"
  92. #define MSG_CONTROL_ARROW " Control \x7E"
  93. #define MSG_RETRACT_ARROW " Retract \x7E"
  94. #define MSG_TUNE " Tune \x7E"
  95. #define MSG_PAUSE_PRINT " Pause Print \x7E"
  96. #define MSG_RESUME_PRINT " Resume Print \x7E"
  97. #define MSG_STOP_PRINT " Stop Print \x7E"
  98. #define MSG_CARD_MENU " Card Menu \x7E"
  99. #define MSG_NO_CARD " No Card"
  100. #define MSG_DWELL "Sleep..."
  101. #define MSG_USERWAIT "Wait for user..."
  102. #define MSG_NO_MOVE "No move."
  103. #define MSG_PART_RELEASE "Partial Release"
  104. #define MSG_KILLED "KILLED. "
  105. #define MSG_STOPPED "STOPPED. "
  106. #define MSG_STEPPER_RELEASED "Released."
  107. #define MSG_CONTROL_RETRACT " Retract mm:"
  108. #define MSG_CONTROL_RETRACTF " Retract F:"
  109. #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
  110. #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
  111. #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
  112. #define MSG_AUTORETRACT " AutoRetr.:"
  113. #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
  114. // Serial Console Messages
  115. #define MSG_Enqueing "enqueing \""
  116. #define MSG_POWERUP "PowerUp"
  117. #define MSG_EXTERNAL_RESET " External Reset"
  118. #define MSG_BROWNOUT_RESET " Brown out Reset"
  119. #define MSG_WATCHDOG_RESET " Watchdog Reset"
  120. #define MSG_SOFTWARE_RESET " Software Reset"
  121. #define MSG_MARLIN "Marlin "
  122. #define MSG_AUTHOR " | Author: "
  123. #define MSG_CONFIGURATION_VER " Last Updated: "
  124. #define MSG_FREE_MEMORY " Free Memory: "
  125. #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
  126. #define MSG_OK "ok"
  127. #define MSG_FILE_SAVED "Done saving file."
  128. #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
  129. #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
  130. #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
  131. #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "
  132. #define MSG_FILE_PRINTED "Done printing file"
  133. #define MSG_BEGIN_FILE_LIST "Begin file list"
  134. #define MSG_END_FILE_LIST "End file list"
  135. #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
  136. #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
  137. #define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
  138. #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
  139. #define MSG_HEATING "Heating..."
  140. #define MSG_HEATING_COMPLETE "Heating done."
  141. #define MSG_BED_HEATING "Bed Heating."
  142. #define MSG_BED_DONE "Bed done."
  143. #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
  144. #define MSG_COUNT_X " Count X: "
  145. #define MSG_ERR_KILLED "Printer halted. kill() called!"
  146. #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
  147. #define MSG_RESEND "Resend: "
  148. #define MSG_UNKNOWN_COMMAND "Unknown command: \""
  149. #define MSG_ACTIVE_EXTRUDER "Active Extruder: "
  150. #define MSG_INVALID_EXTRUDER "Invalid extruder"
  151. #define MSG_X_MIN "x_min: "
  152. #define MSG_X_MAX "x_max: "
  153. #define MSG_Y_MIN "y_min: "
  154. #define MSG_Y_MAX "y_max: "
  155. #define MSG_Z_MIN "z_min: "
  156. #define MSG_Z_MAX "z_max: "
  157. #define MSG_M119_REPORT "Reporting endstop status"
  158. #define MSG_ENDSTOP_HIT "TRIGGERED"
  159. #define MSG_ENDSTOP_OPEN "open"
  160. #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
  161. #define MSG_SD_INIT_FAIL "SD init fail"
  162. #define MSG_SD_VOL_INIT_FAIL "volume.init failed"
  163. #define MSG_SD_OPENROOT_FAIL "openRoot failed"
  164. #define MSG_SD_CARD_OK "SD card ok"
  165. #define MSG_SD_WORKDIR_FAIL "workDir open failed"
  166. #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
  167. #define MSG_SD_FILE_OPENED "File opened: "
  168. #define MSG_SD_SIZE " Size: "
  169. #define MSG_SD_FILE_SELECTED "File selected"
  170. #define MSG_SD_WRITE_TO_FILE "Writing to file: "
  171. #define MSG_SD_PRINTING_BYTE "SD printing byte "
  172. #define MSG_SD_NOT_PRINTING "Not SD printing"
  173. #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
  174. #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
  175. #define MSG_STEPPER_TO_HIGH "Steprate to high: "
  176. #define MSG_ENDSTOPS_HIT "endstops hit: "
  177. #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
  178. #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
  179. #endif
  180. #if LANGUAGE_CHOICE == 2
  181. // LCD Menu Messages
  182. #define WELCOME_MSG MACHINE_NAME " Gotowe."
  183. #define MSG_SD_INSERTED "Karta wlozona"
  184. #define MSG_SD_REMOVED "Karta usunieta"
  185. #define MSG_MAIN " Menu \003"
  186. #define MSG_AUTOSTART " Autostart"
  187. #define MSG_DISABLE_STEPPERS " Wylacz silniki"
  188. #define MSG_AUTO_HOME " Auto. poz. zerowa"
  189. #define MSG_SET_ORIGIN " Ustaw punkt zerowy"
  190. #define MSG_PREHEAT_PLA " Rozgrzej PLA"
  191. #define MSG_PREHEAT_PLA_SETTINGS " Ustawienia roz. PLA"
  192. #define MSG_PREHEAT_ABS " Rozgrzej ABS"
  193. #define MSG_PREHEAT_ABS_SETTINGS " Ustawienia roz. ABS"
  194. #define MSG_COOLDOWN " Chlodzenie"
  195. #define MSG_EXTRUDE " Ekstruzja"
  196. #define MSG_RETRACT " Cofanie"
  197. #define MSG_MOVE_AXIS " Ruch osi \x7E"
  198. #define MSG_SPEED " Predkosc:"
  199. #define MSG_NOZZLE " \002Dysza:"
  200. #define MSG_NOZZLE1 " \002Dysza2:"
  201. #define MSG_NOZZLE2 " \002Dysza3:"
  202. #define MSG_BED " \002Loze:"
  203. #define MSG_FAN_SPEED " Obroty wiatraka:"
  204. #define MSG_FLOW " Przeplyw:"
  205. #define MSG_CONTROL " Kontrola \003"
  206. #define MSG_MIN " \002 Min:"
  207. #define MSG_MAX " \002 Max:"
  208. #define MSG_FACTOR " \002 Mnoznik:"
  209. #define MSG_AUTOTEMP " Auto. temp.:"
  210. #define MSG_ON "Wl. "
  211. #define MSG_OFF "Wyl."
  212. #define MSG_PID_P " PID-P: "
  213. #define MSG_PID_I " PID-I: "
  214. #define MSG_PID_D " PID-D: "
  215. #define MSG_PID_C " PID-C: "
  216. #define MSG_ACC " Acc:"
  217. #define MSG_VXY_JERK " Zryw Vxy: "
  218. #define MSG_VMAX " Vmax "
  219. #define MSG_X "x:"
  220. #define MSG_Y "y:"
  221. #define MSG_Z "z:"
  222. #define MSG_E "e:"
  223. #define MSG_VMIN " Vmin:"
  224. #define MSG_VTRAV_MIN " Vskok min:"
  225. #define MSG_AMAX " Amax "
  226. #define MSG_A_RETRACT " A-wycofanie:"
  227. #define MSG_XSTEPS " krokiX/mm:"
  228. #define MSG_YSTEPS " krokiY/mm:"
  229. #define MSG_ZSTEPS " krokiZ/mm:"
  230. #define MSG_ESTEPS " krokiE/mm:"
  231. #define MSG_MAIN_WIDE " Menu \003"
  232. #define MSG_RECTRACT_WIDE " Wycofanie \x7E"
  233. #define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
  234. #define MSG_TEMPERATURE_RTN " Temperatura \003"
  235. #define MSG_MOTION_WIDE " Ruch \x7E"
  236. #define MSG_STORE_EPROM " Zapisz w pamieci"
  237. #define MSG_LOAD_EPROM " Wczytaj z pamieci"
  238. #define MSG_RESTORE_FAILSAFE " Ustawienia fabryczne"
  239. #define MSG_REFRESH "\004Odswiez"
  240. #define MSG_WATCH " Obserwuj \003"
  241. #define MSG_PREPARE " Przygotuj \x7E"
  242. #define MSG_PREPARE_ALT " Przygotuj \003"
  243. #define MSG_CONTROL_ARROW " Kontroluj \x7E"
  244. #define MSG_RETRACT_ARROW " Wycofaj \x7E"
  245. #define MSG_TUNE "Strojenie\x7E"
  246. #define MSG_PAUSE_PRINT " Pauza \x7E"
  247. #define MSG_RESUME_PRINT " Wznowienie \x7E"
  248. #define MSG_STOP_PRINT " Stop \x7E"
  249. #define MSG_CARD_MENU " Menu SDCard \x7E"
  250. #define MSG_NO_CARD " Brak karty"
  251. #define MSG_DWELL "Uspij..."
  252. #define MSG_USERWAIT "Czekaj na uzytkownika..."
  253. #define MSG_NO_MOVE "Brak ruchu."
  254. #define MSG_PART_RELEASE "Czesciowe zwolnienie"
  255. #define MSG_KILLED "Ubity. "
  256. #define MSG_STOPPED "Zatrzymany. "
  257. #define MSG_STEPPER_RELEASED "Zwolniony."
  258. #define MSG_CONTROL_RETRACT " Wycofaj mm:"
  259. #define MSG_CONTROL_RETRACTF " Wycofaj F:"
  260. #define MSG_CONTROL_RETRACT_ZLIFT " Skok Z mm:"
  261. #define MSG_CONTROL_RETRACT_RECOVER " Cof. wycof. +mm:"
  262. #define MSG_CONTROL_RETRACT_RECOVERF " Cof. wycof. F:"
  263. #define MSG_AUTORETRACT " Auto. wycofanie:"
  264. #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Cos jest nie tak ze struktura menu."
  265. // Serial Console Messages
  266. #define MSG_Enqueing "Kolejkowanie \""
  267. #define MSG_POWERUP "Zasilanie wlaczone"
  268. #define MSG_EXTERNAL_RESET " Reset (zewnetrzny)"
  269. #define MSG_BROWNOUT_RESET " Reset (spadek napiecia)"
  270. #define MSG_WATCHDOG_RESET " Reset (watchdog)"
  271. #define MSG_SOFTWARE_RESET " Reset (programowy)"
  272. #define MSG_MARLIN "Marlin "
  273. #define MSG_AUTHOR " | Autor: "
  274. #define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: "
  275. #define MSG_FREE_MEMORY " Wolna pamiec: "
  276. #define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): "
  277. #define MSG_OK "ok"
  278. #define MSG_FILE_SAVED "Plik zapisany."
  279. #define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:"
  280. #define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: "
  281. #define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:"
  282. #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:"
  283. #define MSG_FILE_PRINTED "Ukonczono wydruk z pliku"
  284. #define MSG_BEGIN_FILE_LIST "Start listy plikow"
  285. #define MSG_END_FILE_LIST "Koniec listy plikow"
  286. #define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder "
  287. #define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder "
  288. #define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :("
  289. #define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder "
  290. #define MSG_HEATING "Nagrzewanie ekstrudera..."
  291. #define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone."
  292. #define MSG_BED_HEATING "Nagrzewanie loza..."
  293. #define MSG_BED_DONE "Nagrzewanie loza zakonczone."
  294. #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
  295. #define MSG_COUNT_X " Liczenie X: "
  296. #define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()"
  297. #define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)"
  298. #define MSG_RESEND "Wyslij ponownie: "
  299. #define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \""
  300. #define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: "
  301. #define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder"
  302. #define MSG_X_MIN "x_min: "
  303. #define MSG_X_MAX "x_max: "
  304. #define MSG_Y_MIN "y_min: "
  305. #define MSG_Y_MAX "y_max: "
  306. #define MSG_Z_MIN "z_min: "
  307. #define MSG_Z_MAX "z_max: "
  308. #define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych"
  309. #define MSG_ENDSTOP_HIT "WYZWOLONY"
  310. #define MSG_ENDSTOP_OPEN "otwarty"
  311. #define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu"
  312. #define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD"
  313. #define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu"
  314. #define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego"
  315. #define MSG_SD_CARD_OK "Karta SD zainicjalizowana"
  316. #define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego"
  317. #define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: "
  318. #define MSG_SD_FILE_OPENED "Otwarto plik:"
  319. #define MSG_SD_SIZE " Rozmiar:"
  320. #define MSG_SD_FILE_SELECTED "Wybrano plik"
  321. #define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: "
  322. #define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt "
  323. #define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD"
  324. #define MSG_SD_ERR_WRITE_TO_FILE "blad podczas zapisu do pliku"
  325. #define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: "
  326. #define MSG_STEPPER_TO_HIGH "Za duza czestotliwosc krokow: "
  327. #define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: "
  328. #define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje"
  329. #define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje"
  330. #endif
  331. #if LANGUAGE_CHOICE == 3
  332. #define WELCOME_MSG MACHINE_NAME " Pret."
  333. #define MSG_SD_INSERTED "Carte inseree"
  334. #define MSG_SD_REMOVED "Carte retiree"
  335. #define MSG_MAIN " Principal \003"
  336. #define MSG_AUTOSTART " Demarrage auto."
  337. #define MSG_DISABLE_STEPPERS " Desactiver moteurs"
  338. #define MSG_AUTO_HOME " Home auto."
  339. #define MSG_SET_ORIGIN " Regler origine"
  340. #define MSG_PREHEAT_PLA " Prechauffage PLA"
  341. #define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA"
  342. #define MSG_PREHEAT_ABS " Prechauffage ABS"
  343. #define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS"
  344. #define MSG_COOLDOWN " Refroidissement"
  345. #define MSG_EXTRUDE " Extrusion"
  346. #define MSG_RETRACT " Retractation"
  347. #define MSG_PREHEAT_PLA " Prechauffage PLA"
  348. #define MSG_PREHEAT_ABS " Prechauffage ABS"
  349. #define MSG_MOVE_AXIS " Deplacer axe \x7E"
  350. #define MSG_SPEED " Vitesse:"
  351. #define MSG_NOZZLE " \002Buse:"
  352. #define MSG_NOZZLE1 " \002Buse2:"
  353. #define MSG_NOZZLE2 " \002Buse3:"
  354. #define MSG_BED " \002Lit:"
  355. #define MSG_FAN_SPEED " Vitesse ventilateur:"
  356. #define MSG_FLOW " Flux:"
  357. #define MSG_CONTROL " Controle \003"
  358. #define MSG_MIN " \002 Min:"
  359. #define MSG_MAX " \002 Max:"
  360. #define MSG_FACTOR " \002 Facteur:"
  361. #define MSG_AUTOTEMP " Temp. Auto.:"
  362. #define MSG_ON "Marche "
  363. #define MSG_OFF "Arret"
  364. #define MSG_PID_P " PID-P: "
  365. #define MSG_PID_I " PID-I: "
  366. #define MSG_PID_D " PID-D: "
  367. #define MSG_PID_C " PID-C: "
  368. #define MSG_ACC " Acc:"
  369. #define MSG_VXY_JERK " Vxy-jerk: "
  370. #define MSG_VMAX " Vmax "
  371. #define MSG_X "x:"
  372. #define MSG_Y "y:"
  373. #define MSG_Z "z:"
  374. #define MSG_E "e:"
  375. #define MSG_VMIN " Vmin:"
  376. #define MSG_VTRAV_MIN " Vdepl min:"
  377. #define MSG_AMAX " Amax "
  378. #define MSG_A_RETRACT " A-retract:"
  379. #define MSG_XSTEPS " Xpas/mm:"
  380. #define MSG_YSTEPS " Ypas/mm:"
  381. #define MSG_ZSTEPS " Zpas/mm:"
  382. #define MSG_ESTEPS " Epas/mm:"
  383. #define MSG_MAIN_WIDE " Principal \003"
  384. #define MSG_RECTRACT_WIDE " Rectractater \x7E"
  385. #define MSG_TEMPERATURE_WIDE " Temperature \x7E"
  386. #define MSG_TEMPERATURE_RTN " Temperature \003"
  387. #define MSG_MOTION_WIDE " Mouvement \x7E"
  388. #define MSG_STORE_EPROM " Sauvegarder memoire"
  389. #define MSG_LOAD_EPROM " Lire memoire"
  390. #define MSG_RESTORE_FAILSAFE " Restaurer memoire"
  391. #define MSG_REFRESH "\004Actualiser"
  392. #define MSG_WATCH " Surveiller \003"
  393. #define MSG_PREPARE " Preparer \x7E"
  394. #define MSG_PREPARE_ALT " Prepare \003"
  395. #define MSG_CONTROL_ARROW " Controle \x7E"
  396. #define MSG_RETRACT_ARROW " Retracter \x7E"
  397. #define MSG_TUNE " Regler \x7E"
  398. #define MSG_PAUSE_PRINT " Pause impression \x7E"
  399. #define MSG_RESUME_PRINT " Reprendre impression \x7E"
  400. #define MSG_STOP_PRINT " Arreter impression \x7E"
  401. #define MSG_CARD_MENU " Menu carte \x7E"
  402. #define MSG_NO_CARD " Pas de carte"
  403. #define MSG_DWELL "Repos..."
  404. #define MSG_USERWAIT "Attente de l'utilisateur..."
  405. #define MSG_NO_MOVE "Aucun mouvement."
  406. #define MSG_PART_RELEASE "Relache partielle"
  407. #define MSG_KILLED "TUE."
  408. #define MSG_STOPPED "STOPPE."
  409. #define MSG_STEPPER_RELEASED "RELACHE."
  410. #define MSG_CONTROL_RETRACT " Retractation mm:"
  411. #define MSG_CONTROL_RETRACTF " Retractation F:"
  412. #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
  413. #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
  414. #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
  415. #define MSG_AUTORETRACT " Retract. Auto.:"
  416. #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Erreur avec MenuStructure."
  417. // Serial Console Messages
  418. #define MSG_Enqueing "Mise en tampon \""
  419. #define MSG_POWERUP "Allumage"
  420. #define MSG_EXTERNAL_RESET " RAZ Externe"
  421. #define MSG_BROWNOUT_RESET " RAZ defaut alim."
  422. #define MSG_WATCHDOG_RESET " RAZ Watchdog"
  423. #define MSG_SOFTWARE_RESET " RAZ logicielle"
  424. #define MSG_MARLIN "Marlin "
  425. #define MSG_AUTHOR " | Auteur: "
  426. #define MSG_CONFIGURATION_VER " Derniere MaJ: "
  427. #define MSG_FREE_MEMORY " Memoire libre: "
  428. #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
  429. #define MSG_OK "ok"
  430. #define MSG_FILE_SAVED "Fichier enregistre."
  431. #define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: "
  432. #define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: "
  433. #define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: "
  434. #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: "
  435. #define MSG_FILE_PRINTED "Impression terminee"
  436. #define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers"
  437. #define MSG_END_FILE_LIST "Fin de la liste de fichiers"
  438. #define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide"
  439. #define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide"
  440. #define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature"
  441. #define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide "
  442. #define MSG_HEATING "En chauffe..."
  443. #define MSG_HEATING_COMPLETE "Chauffe terminee."
  444. #define MSG_BED_HEATING "Chauffe du lit."
  445. #define MSG_BED_DONE "Chauffe du lit terminee."
  446. #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
  447. #define MSG_COUNT_X " Compteur X: "
  448. #define MSG_ERR_KILLED "Impression arretee. kill() appelee!"
  449. #define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)"
  450. #define MSG_RESEND "Renvoie: "
  451. #define MSG_UNKNOWN_COMMAND "Commande inconnue: \""
  452. #define MSG_ACTIVE_EXTRUDER "Extrudeur actif: "
  453. #define MSG_INVALID_EXTRUDER "Extrudeur invalide"
  454. #define MSG_X_MIN "x_min: "
  455. #define MSG_X_MAX "x_max: "
  456. #define MSG_Y_MIN "y_min: "
  457. #define MSG_Y_MAX "y_max: "
  458. #define MSG_Z_MIN "z_min: "
  459. #define MSG_Z_MAX "z_max: "
  460. #define MSG_M119_REPORT "Affichage du status des fin de course"
  461. #define MSG_ENDSTOP_HIT "DECLENCHE"
  462. #define MSG_ENDSTOP_OPEN "OUVERT"
  463. #define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire"
  464. #define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD"
  465. #define MSG_SD_VOL_INIT_FAIL "Echec de volume.init"
  466. #define MSG_SD_OPENROOT_FAIL "Echec openRoot"
  467. #define MSG_SD_CARD_OK "Carte SD Ok"
  468. #define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir"
  469. #define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: "
  470. #define MSG_SD_FILE_OPENED "Fichier ouvert: "
  471. #define MSG_SD_SIZE " Taille: "
  472. #define MSG_SD_FILE_SELECTED "Fichier selectionne"
  473. #define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: "
  474. #define MSG_SD_PRINTING_BYTE "Octet impression SD "
  475. #define MSG_SD_NOT_PRINTING "Pas d'impression SD"
  476. #define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier"
  477. #define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: "
  478. #define MSG_STEPPER_TO_HIGH "Steprate trop eleve: "
  479. #define MSG_ENDSTOPS_HIT "Fin de course atteint: "
  480. #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee"
  481. #define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee"
  482. #endif
  483. #if LANGUAGE_CHOICE == 4
  484. // LCD Menu Messages
  485. #define WELCOME_MSG MACHINE_NAME " Bereit."
  486. #define MSG_SD_INSERTED "SDKarte erkannt"
  487. #define MSG_SD_REMOVED "SDKarte entfernt"
  488. #define MSG_MAIN " Hauptmneü \003"
  489. #define MSG_AUTOSTART " Autostart"
  490. #define MSG_DISABLE_STEPPERS " Stepper abschalten"
  491. #define MSG_AUTO_HOME " Auto Nullpunkt"
  492. #define MSG_SET_ORIGIN " Setze Nullpunkt"
  493. #define MSG_PREHEAT_PLA " Vorwärmen PLA"
  494. #define MSG_PREHEAT_PLA_SETTINGS " Vorwärmen PLA Einstellungen"
  495. #define MSG_PREHEAT_ABS " Vorwärmen ABS"
  496. #define MSG_PREHEAT_ABS_SETTINGS " Vorwärmen ABS Einstellungen"
  497. #define MSG_COOLDOWN " Abkühlen"
  498. #define MSG_EXTRUDE " Extrude"
  499. #define MSG_RETRACT " Retract"
  500. #define MSG_MOVE_AXIS " Achsen bewegen\x7E"
  501. #define MSG_SPEED " Geschw:"
  502. #define MSG_NOZZLE " \002Düse:"
  503. #define MSG_NOZZLE1 " \002Düse2:"
  504. #define MSG_NOZZLE2 " \002Düse3:"
  505. #define MSG_BED " \002Bett:"
  506. #define MSG_FAN_SPEED " Lüftergeschw.:"
  507. #define MSG_FLOW " Fluß:"
  508. #define MSG_CONTROL " Einstellungen \003"
  509. #define MSG_MIN " \002 Min:"
  510. #define MSG_MAX " \002 Max:"
  511. #define MSG_FACTOR " \002 Faktor:"
  512. #define MSG_AUTOTEMP " AutoTemp:"
  513. #define MSG_ON "Ein "
  514. #define MSG_OFF "Aus "
  515. #define MSG_PID_P " PID-P: "
  516. #define MSG_PID_I " PID-I: "
  517. #define MSG_PID_D " PID-D: "
  518. #define MSG_PID_C " PID-C: "
  519. #define MSG_ACC " Acc:"
  520. #define MSG_VXY_JERK " Vxy-jerk: "
  521. #define MSG_VMAX " Vmax "
  522. #define MSG_X "x:"
  523. #define MSG_Y "y:"
  524. #define MSG_Z "z:"
  525. #define MSG_E "e:"
  526. #define MSG_VMIN " Vmin:"
  527. #define MSG_VTRAV_MIN " VTrav min:"
  528. #define MSG_AMAX " Amax "
  529. #define MSG_A_RETRACT " A-Retract:"
  530. #define MSG_XSTEPS " Xsteps/mm:"
  531. #define MSG_YSTEPS " Ysteps/mm:"
  532. #define MSG_ZSTEPS " Zsteps/mm:"
  533. #define MSG_ESTEPS " Esteps/mm:"
  534. #define MSG_MAIN_WIDE " Hauptmenü \003"
  535. #define MSG_RECTRACT_WIDE " Rectract \x7E"
  536. #define MSG_WATCH " Beobachten \003"
  537. #define MSG_TEMPERATURE_WIDE " Temperatur \x7E"
  538. #define MSG_TEMPERATURE_RTN " Temperatur \003"
  539. #define MSG_MOTION_WIDE " Bewegung \x7E"
  540. #define MSG_STORE_EPROM " EPROM speichern"
  541. #define MSG_LOAD_EPROM " EPROM laden"
  542. #define MSG_RESTORE_FAILSAFE " Standardkonfig."
  543. #define MSG_REFRESH "\004Aktualisieren"
  544. #define MSG_PREPARE " Vorbereitung \x7E"
  545. #define MSG_PREPARE_ALT " Vorbereitung \003"
  546. #define MSG_CONTROL_ARROW " Einstellungen \x7E"
  547. #define MSG_TUNE " Justierung \x7E"
  548. #define MSG_PAUSE_PRINT " Druck anhalten\x7E"
  549. #define MSG_RESUME_PRINT " Druck fortsetz\x7E"
  550. #define MSG_STOP_PRINT " Druck stoppen \x7E"
  551. #define MSG_CARD_MENU " SDKarten Menü \x7E"
  552. #define MSG_NO_CARD " Keine SDKarte"
  553. #define MSG_DWELL "Warten..."
  554. #define MSG_USERWAIT "Warte auf Nutzer..."
  555. #define MSG_NO_MOVE "Kein Zug."
  556. #define MSG_PART_RELEASE "Stepper tlw frei"
  557. #define MSG_KILLED "KILLED"
  558. #define MSG_STOPPED "GESTOPPT"
  559. #define MSG_STEPPER_RELEASED "Stepper frei"
  560. #define MSG_CONTROL_RETRACT " Retract mm:"
  561. #define MSG_CONTROL_RETRACTF " Retract F:"
  562. #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
  563. #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
  564. #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
  565. #define MSG_AUTORETRACT " AutoRetr.:"
  566. #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fehler in Menüstruktur."
  567. // Serial Console Messages
  568. #define MSG_Enqueing "enqueing \""
  569. #define MSG_POWERUP "PowerUp"
  570. #define MSG_EXTERNAL_RESET " External Reset"
  571. #define MSG_BROWNOUT_RESET " Brown out Reset"
  572. #define MSG_WATCHDOG_RESET " Watchdog Reset"
  573. #define MSG_SOFTWARE_RESET " Software Reset"
  574. #define MSG_MARLIN "Marlin: "
  575. #define MSG_AUTHOR " | Author: "
  576. #define MSG_CONFIGURATION_VER " Last Updated: "
  577. #define MSG_FREE_MEMORY " Free Memory: "
  578. #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
  579. #define MSG_OK "ok"
  580. #define MSG_FILE_SAVED "Done saving file."
  581. #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
  582. #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
  583. #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
  584. #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
  585. #define MSG_FILE_PRINTED "Done printing file"
  586. #define MSG_BEGIN_FILE_LIST "Begin file list"
  587. #define MSG_END_FILE_LIST "End file list"
  588. #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
  589. #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
  590. #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
  591. #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
  592. #define MSG_HEATING "Heating..."
  593. #define MSG_HEATING_COMPLETE "Heating done."
  594. #define MSG_BED_HEATING "Bed Heating."
  595. #define MSG_BED_DONE "Bed done."
  596. #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
  597. #define MSG_COUNT_X " Count X:"
  598. #define MSG_ERR_KILLED "Printer halted. kill() called !!"
  599. #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
  600. #define MSG_RESEND "Resend:"
  601. #define MSG_UNKNOWN_COMMAND "Unknown command:\""
  602. #define MSG_ACTIVE_EXTRUDER "Active Extruder: "
  603. #define MSG_INVALID_EXTRUDER "Invalid extruder"
  604. #define MSG_X_MIN "x_min: "
  605. #define MSG_X_MAX "x_max: "
  606. #define MSG_Y_MIN "y_min: "
  607. #define MSG_Y_MAX "y_max: "
  608. #define MSG_Z_MIN "z_min: "
  609. #define MSG_Z_MAX "z_max: "
  610. #define MSG_M119_REPORT "Reporting endstop status"
  611. #define MSG_ENDSTOP_HIT "TRIGGERED"
  612. #define MSG_ENDSTOP_OPEN "open"
  613. #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
  614. #define MSG_SD_INIT_FAIL "SD init fail"
  615. #define MSG_SD_VOL_INIT_FAIL "volume.init failed"
  616. #define MSG_SD_OPENROOT_FAIL "openRoot failed"
  617. #define MSG_SD_CARD_OK "SD card ok"
  618. #define MSG_SD_WORKDIR_FAIL "workDir open failed"
  619. #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
  620. #define MSG_SD_FILE_OPENED "File opened:"
  621. #define MSG_SD_SIZE " Size:"
  622. #define MSG_SD_FILE_SELECTED "File selected"
  623. #define MSG_SD_WRITE_TO_FILE "Writing to file: "
  624. #define MSG_SD_PRINTING_BYTE "SD printing byte "
  625. #define MSG_SD_NOT_PRINTING "Not SD printing"
  626. #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
  627. #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
  628. #define MSG_STEPPER_TO_HIGH "Steprate to high : "
  629. #define MSG_ENDSTOPS_HIT "endstops hit: "
  630. #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
  631. #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
  632. #endif
  633. #if LANGUAGE_CHOICE == 5
  634. // LCD Menu Messages
  635. #define WELCOME_MSG MACHINE_NAME " Lista."
  636. #define MSG_SD_INSERTED "Tarjeta SD Colocada"
  637. #define MSG_SD_REMOVED "Tarjeta SD Retirada"
  638. #define MSG_MAIN " Menu Principal \003"
  639. #define MSG_AUTOSTART " Autostart"
  640. #define MSG_DISABLE_STEPPERS " Apagar Motores"
  641. #define MSG_AUTO_HOME " Llevar Ejes al Cero"
  642. #define MSG_SET_ORIGIN " Establecer Cero"
  643. #define MSG_COOLDOWN " Enfriar"
  644. #define MSG_EXTRUDE " Extruir"
  645. #define MSG_RETRACT " Retraer"
  646. #define MSG_PREHEAT_PLA " Precalentar PLA"
  647. #define MSG_PREHEAT_PLA_SETTINGS " Ajustar temp. PLA"
  648. #define MSG_PREHEAT_ABS " Precalentar ABS"
  649. #define MSG_PREHEAT_ABS_SETTINGS " Ajustar temp. ABS"
  650. #define MSG_MOVE_AXIS " Mover Ejes \x7E"
  651. #define MSG_SPEED " Velocidad:"
  652. #define MSG_NOZZLE " \002Nozzle:"
  653. #define MSG_NOZZLE1 " \002Nozzle2:"
  654. #define MSG_NOZZLE2 " \002Nozzle3:"
  655. #define MSG_BED " \002Base:"
  656. #define MSG_FAN_SPEED " Ventilador:"
  657. #define MSG_FLOW " Flujo:"
  658. #define MSG_CONTROL " Control \003"
  659. #define MSG_MIN " \002 Min:"
  660. #define MSG_MAX " \002 Max:"
  661. #define MSG_FACTOR " \002 Fact:"
  662. #define MSG_AUTOTEMP " Autotemp:"
  663. #define MSG_ON "On "
  664. #define MSG_OFF "Off"
  665. #define MSG_PID_P " PID-P: "
  666. #define MSG_PID_I " PID-I: "
  667. #define MSG_PID_D " PID-D: "
  668. #define MSG_PID_C " PID-C: "
  669. #define MSG_ACC " Acc:"
  670. #define MSG_VXY_JERK " Vxy-jerk: "
  671. #define MSG_VMAX " Vmax "
  672. #define MSG_X "x:"
  673. #define MSG_Y "y:"
  674. #define MSG_Z "z:"
  675. #define MSG_E "e:"
  676. #define MSG_VMIN " Vmin:"
  677. #define MSG_VTRAV_MIN " VTrav min:"
  678. #define MSG_AMAX " Amax "
  679. #define MSG_A_RETRACT " A-retrac.:"
  680. #define MSG_XSTEPS " Xpasos/mm:"
  681. #define MSG_YSTEPS " Ypasos/mm:"
  682. #define MSG_ZSTEPS " Zpasos/mm:"
  683. #define MSG_ESTEPS " Epasos/mm:"
  684. #define MSG_MAIN_WIDE " Menu Principal \003"
  685. #define MSG_RECTRACT_WIDE " Retraer \x7E"
  686. #define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
  687. #define MSG_TEMPERATURE_RTN " Temperatura \003"
  688. #define MSG_MOTION_WIDE " Movimiento \x7E"
  689. #define MSG_STORE_EPROM " Guardar Memoria"
  690. #define MSG_LOAD_EPROM " Cargar Memoria"
  691. #define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
  692. #define MSG_REFRESH "\004Volver a cargar"
  693. #define MSG_WATCH " Monitorizar \003"
  694. #define MSG_PREPARE " Preparar \x7E"
  695. #define MSG_PREPARE_ALT " Preparar \003"
  696. #define MSG_CONTROL_ARROW " Control \x7E"
  697. #define MSG_RETRACT_ARROW " Retraer \x7E"
  698. #define MSG_TUNE " Ajustar \x7E"
  699. #define MSG_PAUSE_PRINT " Pausar Impresion \x7E"
  700. #define MSG_RESUME_PRINT " Reanudar Impresion \x7E"
  701. #define MSG_STOP_PRINT " Detener Impresion \x7E"
  702. #define MSG_CARD_MENU " Menu de SD \x7E"
  703. #define MSG_NO_CARD " No hay Tarjeta SD"
  704. #define MSG_DWELL "Reposo..."
  705. #define MSG_USERWAIT "Esperando Ordenes..."
  706. #define MSG_NO_MOVE "Sin movimiento"
  707. #define MSG_PART_RELEASE "Desacople Parcial"
  708. #define MSG_KILLED "PARADA DE EMERGENCIA. "
  709. #define MSG_STOPPED "PARADA. "
  710. #define MSG_STEPPER_RELEASED "Desacoplada."
  711. #define MSG_CONTROL_RETRACT " Retraer mm:"
  712. #define MSG_CONTROL_RETRACTF " Retraer F:"
  713. #define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
  714. #define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
  715. #define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
  716. #define MSG_AUTORETRACT " AutoRetr.:"
  717. #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Hay un error en la estructura del menu"
  718. // Serial Console Messages
  719. #define MSG_Enqueing "En cola \""
  720. #define MSG_POWERUP "PowerUp"
  721. #define MSG_EXTERNAL_RESET " Reset Externo"
  722. #define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
  723. #define MSG_WATCHDOG_RESET " Reset por Bloqueo"
  724. #define MSG_SOFTWARE_RESET " Reset por Software"
  725. #define MSG_MARLIN "Marlin "
  726. #define MSG_AUTHOR " | Autor: "
  727. #define MSG_CONFIGURATION_VER " Ultima actualizacion: "
  728. #define MSG_FREE_MEMORY " Memoria libre: "
  729. #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
  730. #define MSG_OK "ok"
  731. #define MSG_FILE_SAVED "Guardado."
  732. #define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"
  733. #define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"
  734. #define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"
  735. #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"
  736. #define MSG_FILE_PRINTED "Impresion terminada"
  737. #define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"
  738. #define MSG_END_FILE_LIST "Fin de la lista de archivos"
  739. #define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
  740. #define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
  741. #define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"
  742. #define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
  743. #define MSG_HEATING "Calentando..."
  744. #define MSG_HEATING_COMPLETE "Calentamiento Hecho."
  745. #define MSG_BED_HEATING "Calentando la base."
  746. #define MSG_BED_DONE "Base Caliente."
  747. #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
  748. #define MSG_COUNT_X " Cuenta X:"
  749. #define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
  750. #define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"
  751. #define MSG_RESEND "Reenviar:"
  752. #define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""
  753. #define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
  754. #define MSG_INVALID_EXTRUDER "Extrusor Invalido"
  755. #define MSG_X_MIN "x_min: "
  756. #define MSG_X_MAX "x_max: "
  757. #define MSG_Y_MIN "y_min: "
  758. #define MSG_Y_MAX "y_max: "
  759. #define MSG_Z_MIN "z_min: "
  760. #define MSG_M119_REPORT "Comprobando fines de carrera."
  761. #define MSG_ENDSTOP_HIT "PULSADO"
  762. #define MSG_ENDSTOP_OPEN "abierto"
  763. #define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
  764. #define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
  765. #define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
  766. #define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"
  767. #define MSG_SD_CARD_OK "Tarjeta SD OK"
  768. #define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"
  769. #define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "
  770. #define MSG_SD_FILE_OPENED "Archivo abierto:"
  771. #define MSG_SD_SIZE " Tamaño:"
  772. #define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
  773. #define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "
  774. #define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "
  775. #define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"
  776. #define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"
  777. #define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:"
  778. #define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : "
  779. #define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "
  780. #define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"
  781. #define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"
  782. #endif
  783. #if LANGUAGE_CHOICE == 6
  784. // LCD Menu Messages
  785. #define WELCOME_MSG MACHINE_NAME " Готов."
  786. #define MSG_SD_INSERTED "Карта вставлена"
  787. #define MSG_SD_REMOVED "Карта извлечена"
  788. #define MSG_MAIN " Меню \003"
  789. #define MSG_AUTOSTART " Автостарт "
  790. #define MSG_DISABLE_STEPPERS " Выключить двигатели"
  791. #define MSG_AUTO_HOME " Парковка "
  792. #define MSG_SET_ORIGIN " Запомнить ноль "
  793. #define MSG_PREHEAT_PLA " Преднагрев PLA "
  794. #define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA"
  795. #define MSG_PREHEAT_ABS " Преднагрев ABS "
  796. #define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS"
  797. #define MSG_COOLDOWN " Охлаждение "
  798. #define MSG_EXTRUDE " Экструзия "
  799. #define MSG_RETRACT " Откат"
  800. #define MSG_MOVE_AXIS " Движение по осям \x7E"
  801. #define MSG_SPEED " Скорость:"
  802. #define MSG_NOZZLE " \002 Фильера:"
  803. #define MSG_NOZZLE1 " \002 Фильера2:"
  804. #define MSG_NOZZLE2 " \002 Фильера3:"
  805. #define MSG_BED " \002 Кровать:"
  806. #define MSG_FAN_SPEED " Куллер:"
  807. #define MSG_FLOW " Поток:"
  808. #define MSG_CONTROL " Настройки \003"
  809. #define MSG_MIN " \002 Минимум:"
  810. #define MSG_MAX " \002 Максимум:"
  811. #define MSG_FACTOR " \002 Фактор:"
  812. #define MSG_AUTOTEMP " Autotemp:"
  813. #define MSG_ON "Вкл. "
  814. #define MSG_OFF "Выкл. "
  815. #define MSG_PID_P " PID-P: "
  816. #define MSG_PID_I " PID-I: "
  817. #define MSG_PID_D " PID-D: "
  818. #define MSG_PID_C " PID-C: "
  819. #define MSG_ACC " Acc:"
  820. #define MSG_VXY_JERK " Vxy-jerk: "
  821. #define MSG_VMAX " Vmax "
  822. #define MSG_X "x:"
  823. #define MSG_Y "y:"
  824. #define MSG_Z "z:"
  825. #define MSG_E "e:"
  826. #define MSG_VMIN " Vmin:"
  827. #define MSG_VTRAV_MIN " VTrav min:"
  828. #define MSG_AMAX " Amax "
  829. #define MSG_A_RETRACT " A-retract:"
  830. #define MSG_XSTEPS " X шаг/mm:"
  831. #define MSG_YSTEPS " Y шаг/mm:"
  832. #define MSG_ZSTEPS " Z шаг/mm:"
  833. #define MSG_ESTEPS " E шаг/mm:"
  834. #define MSG_MAIN_WIDE " Меню \003"
  835. #define MSG_RECTRACT_WIDE " Откат подачи \x7E"
  836. #define MSG_TEMPERATURE_WIDE " Температура \x7E"
  837. #define MSG_TEMPERATURE_RTN " Температура \003"
  838. #define MSG_MOTION_WIDE " Скорости \x7E"
  839. #define MSG_STORE_EPROM " Сохранить настройки"
  840. #define MSG_LOAD_EPROM " Загрузить настройки"
  841. #define MSG_RESTORE_FAILSAFE " Сброс настроек "
  842. #define MSG_REFRESH "\004Обновить "
  843. #define MSG_WATCH " Обзор \003"
  844. #define MSG_PREPARE " Действия \x7E"
  845. #define MSG_PREPARE_ALT " Действия \003"
  846. #define MSG_CONTROL_ARROW " Настройки \x7E"
  847. #define MSG_RETRACT_ARROW " Настройки отката \x7E"
  848. #define MSG_TUNE " Tune \x7E"
  849. #define MSG_PAUSE_PRINT " Пауза печати \x7E"
  850. #define MSG_RESUME_PRINT " Продолжить печать \x7E"
  851. #define MSG_STOP_PRINT " Остановить печать \x7E"
  852. #define MSG_CARD_MENU " Меню карты \x7E"
  853. #define MSG_NO_CARD " Нет карты"
  854. #define MSG_DWELL "Сон..."
  855. #define MSG_USERWAIT "Нажмите для продолж."
  856. #define MSG_NO_MOVE "Нет движения. "
  857. #define MSG_PART_RELEASE " Извлечение принта "
  858. #define MSG_KILLED "УБИТО. "
  859. #define MSG_STOPPED "ОСТАНОВЛЕНО. "
  860. #define MSG_STEPPER_RELEASED "Двигатели отключены."
  861. #define MSG_CONTROL_RETRACT " Откат mm:"
  862. #define MSG_CONTROL_RETRACTF " Откат F:"
  863. #define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:"
  864. #define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:"
  865. #define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:"
  866. #define MSG_AUTORETRACT " АвтоОткат:"
  867. #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Ошибка в структуре меню."
  868. // Serial Console Messages
  869. #define MSG_Enqueing "Запланировано \""
  870. #define MSG_POWERUP "Включение питания"
  871. #define MSG_EXTERNAL_RESET " Внешний сброс"
  872. #define MSG_BROWNOUT_RESET " Brown out сброс"
  873. #define MSG_WATCHDOG_RESET " Watchdog сброс"
  874. #define MSG_SOFTWARE_RESET " программный сброс"
  875. #define MSG_MARLIN "Marlin "
  876. #define MSG_AUTHOR " | Автор: "
  877. #define MSG_CONFIGURATION_VER " Последнее обновление: "
  878. #define MSG_FREE_MEMORY " Памяти свободно: "
  879. #define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: "
  880. #define MSG_OK "ok"
  881. #define MSG_FILE_SAVED "Файл записан."
  882. #define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:"
  883. #define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:"
  884. #define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:"
  885. #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:"
  886. #define MSG_FILE_PRINTED "Печать файла завершена"
  887. #define MSG_BEGIN_FILE_LIST "Список файлов"
  888. #define MSG_END_FILE_LIST "Конец списка файлов"
  889. #define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера "
  890. #define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера "
  891. #define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры"
  892. #define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера "
  893. #define MSG_HEATING "Нагрев... "
  894. #define MSG_HEATING_COMPLETE "Наргето. "
  895. #define MSG_BED_HEATING "Нагрев стола... "
  896. #define MSG_BED_DONE "Стол нагрет. "
  897. #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
  898. #define MSG_COUNT_X " Count X:"
  899. #define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!"
  900. #define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)"
  901. #define MSG_RESEND "Переотправка:"
  902. #define MSG_UNKNOWN_COMMAND "Неизвестная команда:\""
  903. #define MSG_ACTIVE_EXTRUDER "Активный экструдер: "
  904. #define MSG_INVALID_EXTRUDER "Ошибка экструдера"
  905. #define MSG_X_MIN "x_min:"
  906. #define MSG_X_MAX "x_max:"
  907. #define MSG_Y_MIN "y_min:"
  908. #define MSG_Y_MAX "y_max:"
  909. #define MSG_Z_MIN "z_min:"
  910. #define MSG_Z_MAX "z_max:"
  911. #define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку"
  912. #define MSG_SD_INIT_FAIL "Ошибка инициализации SD"
  913. #define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела"
  914. #define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня"
  915. #define MSG_SD_CARD_OK "SD карта в порядке"
  916. #define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку"
  917. #define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: "
  918. #define MSG_SD_FILE_OPENED "Файл открыт:"
  919. #define MSG_SD_SIZE " Размер:"
  920. #define MSG_SD_FILE_SELECTED "Файл выбран"
  921. #define MSG_SD_WRITE_TO_FILE "Запись в файл: "
  922. #define MSG_SD_PRINTING_BYTE "SD печать byte "
  923. #define MSG_SD_NOT_PRINTING "нет SD печати"
  924. #define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл"
  925. #define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:"
  926. #define MSG_STEPPER_TO_HIGH "Частота шагов очень высока : "
  927. #define MSG_ENDSTOPS_HIT "концевик сработал: "
  928. #define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии"
  929. #define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии"
  930. #define MSG_M119_REPORT "Статус концевиков"
  931. #define MSG_ENDSTOP_HIT "Срабатывание концевика"
  932. #define MSG_ENDSTOP_OPEN "Концевик освобожден"
  933. #endif
  934. #if LANGUAGE_CHOICE == 7
  935. // LCD Menu Messages
  936. #define WELCOME_MSG MACHINE_NAME " Pronto."
  937. #define MSG_SD_INSERTED "SD Card inserita"
  938. #define MSG_SD_REMOVED "SD Card rimossa"
  939. #define MSG_MAIN " Menu principale \003"
  940. #define MSG_AUTOSTART " Autostart"
  941. #define MSG_DISABLE_STEPPERS " Disabilita Motori Passo-Passo"
  942. #define MSG_AUTO_HOME " Auto Home"
  943. #define MSG_SET_ORIGIN " Imposta Origini Assi"
  944. #define MSG_PREHEAT_PLA " Preriscalda PLA"
  945. #define MSG_PREHEAT_PLA_SETTINGS " Impostazioni Preriscaldamento PLA"
  946. #define MSG_PREHEAT_ABS " Preriscalda ABS"
  947. #define MSG_PREHEAT_ABS_SETTINGS " Impostazioni Preriscaldamento ABS"
  948. #define MSG_COOLDOWN " Rafredda"
  949. #define MSG_EXTRUDE " Estrudi"
  950. #define MSG_RETRACT " Ritrai"
  951. #define MSG_MOVE_AXIS " Muovi Asse \x7E"
  952. #define MSG_SPEED " Velcità:"
  953. #define MSG_NOZZLE " \002Ugello:"
  954. #define MSG_NOZZLE1 " \002Ugello2:"
  955. #define MSG_NOZZLE2 " \002Ugello3:"
  956. #define MSG_BED " \002Piatto:"
  957. #define MSG_FAN_SPEED " Velocità Ventola:"
  958. #define MSG_FLOW " Flusso:"
  959. #define MSG_CONTROL " Controllo \003"
  960. #define MSG_MIN " \002 Min:"
  961. #define MSG_MAX " \002 Max:"
  962. #define MSG_FACTOR " \002 Fact:"
  963. #define MSG_AUTOTEMP " Autotemp:"
  964. #define MSG_ON "On "
  965. #define MSG_OFF "Off"
  966. #define MSG_PID_P " PID-P: "
  967. #define MSG_PID_I " PID-I: "
  968. #define MSG_PID_D " PID-D: "
  969. #define MSG_PID_C " PID-C: "
  970. #define MSG_ACC " Acc:"
  971. #define MSG_VXY_JERK " Vxy-jerk: "
  972. #define MSG_VMAX " Vmax "
  973. #define MSG_X "x:"
  974. #define MSG_Y "y:"
  975. #define MSG_Z "z:"
  976. #define MSG_E "e:"
  977. #define MSG_VMIN " Vmin:"
  978. #define MSG_VTRAV_MIN " VTrav min:"
  979. #define MSG_AMAX " Amax "
  980. #define MSG_A_RETRACT " A-ritrai:"
  981. #define MSG_XSTEPS " Xpassi/mm:"
  982. #define MSG_YSTEPS " Ypassi/mm:"
  983. #define MSG_ZSTEPS " Zpassi/mm:"
  984. #define MSG_ESTEPS " Epassi/mm:"
  985. #define MSG_MAIN_WIDE " Menu Principale \003"
  986. #define MSG_RECTRACT_WIDE " Ritrai \x7E"
  987. #define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
  988. #define MSG_TEMPERATURE_RTN " Temperatura \003"
  989. #define MSG_MOTION_WIDE " Movimento \x7E"
  990. #define MSG_STORE_EPROM " Salva in memoria"
  991. #define MSG_LOAD_EPROM " Carica dalla memoria"
  992. #define MSG_RESTORE_FAILSAFE " Configurazioni di default"
  993. #define MSG_REFRESH "\004Aggiorna"
  994. #define MSG_WATCH " Guarda \003"
  995. #define MSG_PREPARE " Prepara \x7E"
  996. #define MSG_PREPARE_ALT " Prepara \003"
  997. #define MSG_CONTROL_ARROW " Controllo \x7E"
  998. #define MSG_RETRACT_ARROW " Ritrai \x7E"
  999. #define MSG_TUNE " Tune \x7E"
  1000. #define MSG_PAUSE_PRINT " Metti in Pausa la Stampa \x7E"
  1001. #define MSG_RESUME_PRINT " Riprendi Stampa \x7E"
  1002. #define MSG_STOP_PRINT " Arresta Stampa \x7E"
  1003. #define MSG_CARD_MENU " Card Menu \x7E"
  1004. #define MSG_NO_CARD " No Card"
  1005. #define MSG_DWELL " Sospensione..."
  1006. #define MSG_USERWAIT "Attendi utente..."
  1007. #define MSG_NO_MOVE "Nessun movimento."
  1008. #define MSG_PART_RELEASE "Rilascio Parziale"
  1009. #define MSG_KILLED "UCCISO. "
  1010. #define MSG_STOPPED "ARRESTATO. "
  1011. #define MSG_STEPPER_RELEASED "Rilasciato."
  1012. #define MSG_CONTROL_RETRACT " Ritrai mm:"
  1013. #define MSG_CONTROL_RETRACTF " Ritrai F:"
  1014. #define MSG_CONTROL_RETRACT_ZLIFT " Salta mm:"
  1015. #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
  1016. #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
  1017. #define MSG_AUTORETRACT " AutoRilascio.:"
  1018. #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure."
  1019. // Serial Console Messages
  1020. #define MSG_Enqueing "accodamento \""
  1021. #define MSG_POWERUP "Accensione"
  1022. #define MSG_EXTERNAL_RESET " Reset Esterno"
  1023. #define MSG_BROWNOUT_RESET " Brown out Reset"
  1024. #define MSG_WATCHDOG_RESET " Watchdog Reset"
  1025. #define MSG_SOFTWARE_RESET " Software Reset"
  1026. #define MSG_MARLIN "Marlin "
  1027. #define MSG_AUTHOR " | Autore: "
  1028. #define MSG_CONFIGURATION_VER " Ultimo Aggiornamento: "
  1029. #define MSG_FREE_MEMORY " Memoria Libera: "
  1030. #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
  1031. #define MSG_OK "ok"
  1032. #define MSG_FILE_SAVED "File Salvato."
  1033. #define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea:"
  1034. #define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea:"
  1035. #define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea:"
  1036. #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea:"
  1037. #define MSG_FILE_PRINTED "File stampato"
  1038. #define MSG_BEGIN_FILE_LIST "Inizio Lista File"
  1039. #define MSG_END_FILE_LIST "Fine Lista File"
  1040. #define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido "
  1041. #define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido "
  1042. #define MSG_ERR_NO_THERMISTORS "Nessun Termistore - nessuna temperatura"
  1043. #define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido "
  1044. #define MSG_HEATING "Riscaldamento..."
  1045. #define MSG_HEATING_COMPLETE "Riscaldamento concluso."
  1046. #define MSG_BED_HEATING "Riscaldamento Piatto."
  1047. #define MSG_BED_DONE "Piatto Pronto."
  1048. #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
  1049. #define MSG_COUNT_X " Calcola X:"
  1050. #define MSG_ERR_KILLED "Stampante Calda. kill() chiamata !!"
  1051. #define MSG_ERR_STOPPED "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)"
  1052. #define MSG_RESEND "Reinviato:"
  1053. #define MSG_UNKNOWN_COMMAND "Comando sconosciuto:\""
  1054. #define MSG_ACTIVE_EXTRUDER "Attiva Estrusore: "
  1055. #define MSG_INVALID_EXTRUDER "Estrusore non valido"
  1056. #define MSG_X_MIN "x_min: "
  1057. #define MSG_X_MAX "x_max: "
  1058. #define MSG_Y_MIN "y_min: "
  1059. #define MSG_Y_MAX "y_max: "
  1060. #define MSG_Z_MIN "z_min: "
  1061. #define MSG_Z_MAX "z_max: "
  1062. #define MSG_M119_REPORT "Segnalazione stato degli endstop"
  1063. #define MSG_ENDSTOP_HIT "INNESCATO"
  1064. #define MSG_ENDSTOP_OPEN "aperto"
  1065. #define MSG_SD_CANT_OPEN_SUBDIR "Impossibile aprire sottocartella"
  1066. #define MSG_SD_INIT_FAIL "Fallita Inizializzazione SD"
  1067. #define MSG_SD_VOL_INIT_FAIL "Fallito il montaggio del Volume"
  1068. #define MSG_SD_OPENROOT_FAIL "Fallita l'apertura Cartella Principale"
  1069. #define MSG_SD_CARD_OK "SD card ok"
  1070. #define MSG_SD_WORKDIR_FAIL "Fallita l'apertura Cartella di Lavoro"
  1071. #define MSG_SD_OPEN_FILE_FAIL "Fallita l'apertura del File: "
  1072. #define MSG_SD_FILE_OPENED "File aperto:"
  1073. #define MSG_SD_SIZE " Dimensione:"
  1074. #define MSG_SD_FILE_SELECTED "File selezionato"
  1075. #define MSG_SD_WRITE_TO_FILE "Scrittura su file: "
  1076. #define MSG_SD_PRINTING_BYTE "Si sta scrivendo il byte su SD "
  1077. #define MSG_SD_NOT_PRINTING "Non si sta scrivendo su SD"
  1078. #define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file"
  1079. #define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella:"
  1080. #define MSG_STEPPER_TO_HIGH "Steprate troppo alto : "
  1081. #define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: "
  1082. #define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda"
  1083. #define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga"
  1084. #endif
  1085. #if LANGUAGE_CHOICE == 8
  1086. // LCD Menu Messages
  1087. #define WELCOME_MSG MACHINE_NAME " Pronta."
  1088. #define MSG_SD_INSERTED "Cartao SD inserido"
  1089. #define MSG_SD_REMOVED "Cartao SD removido"
  1090. #define MSG_MAIN " Menu Principal \003"
  1091. #define MSG_AUTOSTART " Autostart"
  1092. #define MSG_DISABLE_STEPPERS " Apagar Motores"
  1093. #define MSG_AUTO_HOME " Ir para Origen"
  1094. #define MSG_SET_ORIGIN " Estabelecer Origen"
  1095. #define MSG_PREHEAT_PLA " pre-aquecer PLA"
  1096. #define MSG_PREHEAT_PLA_SETTINGS " pre-aquecer PLA Setting"
  1097. #define MSG_PREHEAT_ABS " pre-aquecer ABS"
  1098. #define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting"
  1099. #define MSG_COOLDOWN " Esfriar"
  1100. #define MSG_EXTRUDE " Extrudar"
  1101. #define MSG_RETRACT " Retrair"
  1102. #define MSG_PREHEAT_PLA " pre-aquecer PLA"
  1103. #define MSG_PREHEAT_ABS " pre-aquecer ABS"
  1104. #define MSG_MOVE_AXIS " Mover eixo \x7E"
  1105. #define MSG_SPEED " Velocidade:"
  1106. #define MSG_NOZZLE " \002Nozzle:"
  1107. #define MSG_NOZZLE1 " \002Nozzle2:"
  1108. #define MSG_NOZZLE2 " \002Nozzle3:"
  1109. #define MSG_BED " \002Base:"
  1110. #define MSG_FAN_SPEED " Velocidade Ventoinha:"
  1111. #define MSG_FLOW " Fluxo:"
  1112. #define MSG_CONTROL " Controle \003"
  1113. #define MSG_MIN " \002 Min:"
  1114. #define MSG_MAX " \002 Max:"
  1115. #define MSG_FACTOR " \002 Fact:"
  1116. #define MSG_AUTOTEMP " Autotemp:"
  1117. #define MSG_ON "On "
  1118. #define MSG_OFF "Off"
  1119. #define MSG_PID_P " PID-P: "
  1120. #define MSG_PID_I " PID-I: "
  1121. #define MSG_PID_D " PID-D: "
  1122. #define MSG_PID_C " PID-C: "
  1123. #define MSG_ACC " Acc:"
  1124. #define MSG_VXY_JERK " Vxy-jerk: "
  1125. #define MSG_VMAX " Vmax "
  1126. #define MSG_X "x:"
  1127. #define MSG_Y "y:"
  1128. #define MSG_Z "z:"
  1129. #define MSG_E "e:"
  1130. #define MSG_VMIN " Vmin:"
  1131. #define MSG_VTRAV_MIN " VTrav min:"
  1132. #define MSG_AMAX " Amax "
  1133. #define MSG_A_RETRACT " A-retract:"
  1134. #define MSG_XSTEPS " Xpasso/mm:"
  1135. #define MSG_YSTEPS " Ypasso/mm:"
  1136. #define MSG_ZSTEPS " Zpasso/mm:"
  1137. #define MSG_ESTEPS " Epasso/mm:"
  1138. #define MSG_MAIN_WIDE " Menu Principal \003"
  1139. #define MSG_RECTRACT_WIDE " Retrair \x7E"
  1140. #define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
  1141. #define MSG_TEMPERATURE_RTN " Temperatura \003"
  1142. #define MSG_MOTION_WIDE " Movimento \x7E"
  1143. #define MSG_STORE_EPROM " Guardar memoria"
  1144. #define MSG_LOAD_EPROM " Carregar memoria"
  1145. #define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
  1146. #define MSG_REFRESH "\004Recarregar"
  1147. #define MSG_WATCH " Monitorar \003"
  1148. #define MSG_PREPARE " Preparar \x7E"
  1149. #define MSG_PREPARE_ALT " Preparar \003"
  1150. #define MSG_CONTROL_ARROW " Controle \x7E"
  1151. #define MSG_RETRACT_ARROW " Retrair \x7E"
  1152. #define MSG_TUNE " Tune \x7E"
  1153. #define MSG_PAUSE_PRINT " Pausar Impressao \x7E"
  1154. #define MSG_RESUME_PRINT " Resumir Impressao \x7E"
  1155. #define MSG_STOP_PRINT " Parar Impressao \x7E"
  1156. #define MSG_CARD_MENU " Menu cartao SD \x7E"
  1157. #define MSG_NO_CARD " Sem cartao SD"
  1158. #define MSG_DWELL "Repouso..."
  1159. #define MSG_USERWAIT "Esperando Ordem..."
  1160. #define MSG_NO_MOVE "Sem movimento."
  1161. #define MSG_PART_RELEASE "Lancamento Parcial"
  1162. #define MSG_KILLED "PARADA DE EMERGENCIA. "
  1163. #define MSG_STOPPED "PARADA. "
  1164. #define MSG_STEPPER_RELEASED "Lancado."
  1165. #define MSG_CONTROL_RETRACT " Retrair mm:"
  1166. #define MSG_CONTROL_RETRACTF " Retrair F:"
  1167. #define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
  1168. #define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
  1169. #define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
  1170. #define MSG_AUTORETRACT " AutoRetr.:"
  1171. #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu."
  1172. // Serial Console Messages
  1173. #define MSG_Enqueing "enqueing \""
  1174. #define MSG_POWERUP "PowerUp"
  1175. #define MSG_EXTERNAL_RESET " Reset Externo"
  1176. #define MSG_BROWNOUT_RESET " Reset por voltagem incorreta"
  1177. #define MSG_WATCHDOG_RESET " Reset por Bloqueio"
  1178. #define MSG_SOFTWARE_RESET " Reset por Software"
  1179. #define MSG_MARLIN "Marlin "
  1180. #define MSG_AUTHOR " | Author: "
  1181. #define MSG_CONFIGURATION_VER " Ultima atualizacao: "
  1182. #define MSG_FREE_MEMORY " memoria Livre: "
  1183. #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
  1184. #define MSG_OK "ok"
  1185. #define MSG_FILE_SAVED "Guardado."
  1186. #define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:"
  1187. #define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:"
  1188. #define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :"
  1189. #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:"
  1190. #define MSG_FILE_PRINTED "Impressao terminada"
  1191. #define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos"
  1192. #define MSG_END_FILE_LIST "Fim da lista de arquivos"
  1193. #define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido "
  1194. #define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido "
  1195. #define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp"
  1196. #define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido "
  1197. #define MSG_HEATING "Aquecendo..."
  1198. #define MSG_HEATING_COMPLETE "Aquecido."
  1199. #define MSG_BED_HEATING "Aquecendo a Base."
  1200. #define MSG_BED_DONE "Base quente."
  1201. #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
  1202. #define MSG_COUNT_X " Conta X:"
  1203. #define MSG_ERR_KILLED "Impressora parada com kill() !!"
  1204. #define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)"
  1205. #define MSG_RESEND "Reenviar:"
  1206. #define MSG_UNKNOWN_COMMAND "Comando desconhecido:\""
  1207. #define MSG_ACTIVE_EXTRUDER "Extrusor ativo: "
  1208. #define MSG_INVALID_EXTRUDER "Extrusor invalido"
  1209. #define MSG_X_MIN "x_min: "
  1210. #define MSG_X_MAX "x_max: "
  1211. #define MSG_Y_MIN "y_min: "
  1212. #define MSG_Y_MAX "y_max: "
  1213. #define MSG_Z_MIN "z_min: "
  1214. #define MSG_Z_MAX "z_max: "
  1215. #define MSG_M119_REPORT "Relatando estado do ponto final"
  1216. #define MSG_ENDSTOP_HIT "PULSADO"
  1217. #define MSG_ENDSTOP_OPEN "Aberto"
  1218. #define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio"
  1219. #define MSG_SD_INIT_FAIL "Falha ao iniciar SD"
  1220. #define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume"
  1221. #define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz"
  1222. #define MSG_SD_CARD_OK "cartao SD ok"
  1223. #define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho"
  1224. #define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: "
  1225. #define MSG_SD_FILE_OPENED "Arquivo aberto:"
  1226. #define MSG_SD_SIZE " Size:"
  1227. #define MSG_SD_FILE_SELECTED "Arquivo selecionado"
  1228. #define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: "
  1229. #define MSG_SD_PRINTING_BYTE "SD imprimindo o byte "
  1230. #define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD"
  1231. #define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo"
  1232. #define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:"
  1233. #define MSG_STEPPER_TO_HIGH "Steprate muito alto : "
  1234. #define MSG_ENDSTOPS_HIT "O ponto final foi tocado: "
  1235. #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada"
  1236. #define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada"
  1237. #endif
  1238. #endif // ifndef LANGUAGE_H