My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Вы не можете выбрать более 25 тем Темы должны начинаться с буквы или цифры, могут содержать дефисы(-) и должны содержать не более 35 символов.

platformio.ini 50KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438
  1. #
  2. # Marlin Firmware
  3. # PlatformIO Configuration File
  4. #
  5. # For detailed documentation with EXAMPLES:
  6. #
  7. # https://docs.platformio.org/en/latest/projectconf/index.html
  8. #
  9. # Automatic targets - enable auto-uploading
  10. #targets = upload
  11. #
  12. # By default platformio build will abort after 5 errors.
  13. # Remove '-fmax-errors=5' from build_flags below to see all.
  14. #
  15. [platformio]
  16. src_dir = Marlin
  17. boards_dir = buildroot/share/PlatformIO/boards
  18. default_envs = mega2560
  19. include_dir = Marlin
  20. #
  21. # The 'common' values are used for most Marlin builds
  22. #
  23. [common]
  24. default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
  25. -<src/lcd/HD44780> -<src/lcd/TFTGLCD> -<src/lcd/dwin> -<src/lcd/dogm> -<src/lcd/tft> -<src/lcd/tft_io>
  26. -<src/HAL/STM32/tft> -<src/HAL/STM32F1/tft>
  27. -<src/lcd/menu>
  28. -<src/lcd/menu/game/game.cpp> -<src/lcd/menu/game/brickout.cpp> -<src/lcd/menu/game/invaders.cpp>
  29. -<src/lcd/menu/game/maze.cpp> -<src/lcd/menu/game/snake.cpp>
  30. -<src/lcd/menu/menu_backlash.cpp>
  31. -<src/lcd/menu/menu_bed_corners.cpp>
  32. -<src/lcd/menu/menu_bed_leveling.cpp>
  33. -<src/lcd/menu/menu_cancelobject.cpp>
  34. -<src/lcd/menu/menu_delta_calibrate.cpp>
  35. -<src/lcd/menu/menu_filament.cpp>
  36. -<src/lcd/menu/menu_info.cpp>
  37. -<src/lcd/menu/menu_job_recovery.cpp>
  38. -<src/lcd/menu/menu_led.cpp>
  39. -<src/lcd/menu/menu_media.cpp>
  40. -<src/lcd/menu/menu_mmu2.cpp>
  41. -<src/lcd/menu/menu_password.cpp>
  42. -<src/lcd/menu/menu_power_monitor.cpp>
  43. -<src/lcd/menu/menu_spindle_laser.cpp>
  44. -<src/lcd/menu/menu_temperature.cpp>
  45. -<src/lcd/menu/menu_tmc.cpp>
  46. -<src/lcd/menu/menu_touch_screen.cpp>
  47. -<src/lcd/menu/menu_tramming.cpp>
  48. -<src/lcd/menu/menu_ubl.cpp>
  49. -<src/lcd/extui/lib/mks_ui>
  50. -<src/lcd/extui/lib/dgus> -<src/lcd/extui/dgus_lcd.cpp>
  51. -<src/lcd/extui/example.cpp>
  52. -<src/lcd/extui/malyan_lcd.cpp>
  53. -<src/lcd/extui/lib/ftdi_eve_touch_ui>
  54. -<src/lcd/extui/anycubic_chiron_lcd.cpp> -<src/lcd/extui/lib/anycubic_chiron>
  55. -<src/lcd/extui/anycubic_i3mega_lcd.cpp> -<src/lcd/extui/lib/anycubic_i3mega>
  56. -<src/lcd/lcdprint.cpp>
  57. -<src/lcd/touch/touch_buttons.cpp>
  58. -<src/sd/usb_flashdrive>
  59. -<src/HAL/shared/backtrace>
  60. -<src/feature/babystep.cpp>
  61. -<src/feature/backlash.cpp>
  62. -<src/feature/baricuda.cpp> -<src/gcode/feature/baricuda>
  63. -<src/feature/bedlevel/abl> -<src/gcode/bedlevel/abl>
  64. -<src/feature/bedlevel/mbl> -<src/gcode/bedlevel/mbl>
  65. -<src/feature/bedlevel/ubl> -<src/gcode/bedlevel/ubl>
  66. -<src/feature/binary_stream.cpp> -<src/libs/heatshrink>
  67. -<src/feature/bltouch.cpp>
  68. -<src/feature/cancel_object.cpp> -<src/gcode/feature/cancel>
  69. -<src/feature/caselight.cpp> -<src/gcode/feature/caselight>
  70. -<src/feature/closedloop.cpp>
  71. -<src/feature/controllerfan.cpp> -<src/gcode/feature/controllerfan>
  72. -<src/feature/dac> -<src/feature/digipot>
  73. -<src/feature/direct_stepping.cpp> -<src/gcode/motion/G6.cpp>
  74. -<src/feature/e_parser.cpp>
  75. -<src/feature/encoder_i2c.cpp>
  76. -<src/feature/fanmux.cpp>
  77. -<src/feature/filwidth.cpp> -<src/gcode/feature/filwidth>
  78. -<src/feature/fwretract.cpp> -<src/gcode/feature/fwretract>
  79. -<src/feature/host_actions.cpp>
  80. -<src/feature/hotend_idle.cpp>
  81. -<src/feature/joystick.cpp>
  82. -<src/feature/leds/blinkm.cpp>
  83. -<src/feature/leds/leds.cpp>
  84. -<src/feature/leds/neopixel.cpp>
  85. -<src/feature/leds/pca9533.cpp>
  86. -<src/feature/leds/pca9632.cpp>
  87. -<src/feature/leds/printer_event_leds.cpp>
  88. -<src/feature/leds/tempstat.cpp>
  89. -<src/feature/max7219.cpp>
  90. -<src/feature/mixing.cpp>
  91. -<src/feature/mmu2> -<src/gcode/feature/prusa_MMU2>
  92. -<src/feature/password> -<src/gcode/feature/password>
  93. -<src/feature/pause.cpp>
  94. -<src/feature/power.cpp>
  95. -<src/feature/power_monitor.cpp> -<src/gcode/feature/power_monitor>
  96. -<src/feature/powerloss.cpp> -<src/gcode/feature/powerloss>
  97. -<src/feature/probe_temp_comp.cpp>
  98. -<src/feature/runout.cpp> -<src/gcode/feature/runout>
  99. -<src/feature/snmm.cpp>
  100. -<src/feature/solenoid.cpp> -<src/gcode/control/M380_M381.cpp>
  101. -<src/feature/spindle_laser.cpp> -<src/gcode/control/M3-M5.cpp>
  102. -<src/feature/tmc_util.cpp> -<src/module/stepper/trinamic.cpp>
  103. -<src/feature/twibus.cpp>
  104. -<src/feature/z_stepper_align.cpp>
  105. -<src/gcode/bedlevel/G26.cpp>
  106. -<src/gcode/bedlevel/G35.cpp>
  107. -<src/gcode/bedlevel/G42.cpp>
  108. -<src/gcode/bedlevel/M420.cpp>
  109. -<src/gcode/calibrate/G33.cpp>
  110. -<src/gcode/calibrate/G34.cpp>
  111. -<src/gcode/calibrate/G34_M422.cpp>
  112. -<src/gcode/calibrate/G76_M192_M871.cpp>
  113. -<src/gcode/calibrate/G425.cpp>
  114. -<src/gcode/calibrate/M12.cpp>
  115. -<src/gcode/calibrate/M48.cpp>
  116. -<src/gcode/calibrate/M100.cpp>
  117. -<src/gcode/calibrate/M425.cpp>
  118. -<src/gcode/calibrate/M666.cpp>
  119. -<src/gcode/calibrate/M852.cpp>
  120. -<src/gcode/control/M42.cpp> -<src/gcode/control/M226.cpp>
  121. -<src/gcode/config/M43.cpp>
  122. -<src/gcode/config/M217.cpp>
  123. -<src/gcode/config/M218.cpp>
  124. -<src/gcode/config/M221.cpp>
  125. -<src/gcode/config/M281.cpp>
  126. -<src/gcode/config/M301.cpp>
  127. -<src/gcode/config/M302.cpp>
  128. -<src/gcode/config/M304.cpp>
  129. -<src/gcode/config/M305.cpp>
  130. -<src/gcode/config/M540.cpp>
  131. -<src/gcode/config/M575.cpp>
  132. -<src/gcode/config/M672.cpp>
  133. -<src/gcode/control/M7-M9.cpp>
  134. -<src/gcode/control/M211.cpp>
  135. -<src/gcode/control/M605.cpp>
  136. -<src/gcode/feature/advance>
  137. -<src/gcode/feature/camera>
  138. -<src/gcode/feature/i2c>
  139. -<src/gcode/feature/L6470>
  140. -<src/gcode/feature/leds/M150.cpp>
  141. -<src/gcode/feature/leds/M7219.cpp>
  142. -<src/gcode/feature/macro>
  143. -<src/gcode/feature/mixing/M163-M165.cpp>
  144. -<src/gcode/feature/mixing/M166.cpp>
  145. -<src/gcode/feature/pause/G27.cpp>
  146. -<src/gcode/feature/pause/G60.cpp>
  147. -<src/gcode/feature/pause/G61.cpp>
  148. -<src/gcode/feature/pause/M125.cpp>
  149. -<src/gcode/feature/pause/M600.cpp>
  150. -<src/gcode/feature/pause/M603.cpp>
  151. -<src/gcode/feature/pause/M701_M702.cpp>
  152. -<src/gcode/feature/trinamic/M122.cpp>
  153. -<src/gcode/feature/trinamic/M569.cpp>
  154. -<src/gcode/feature/trinamic/M906.cpp>
  155. -<src/gcode/feature/trinamic/M911-M914.cpp>
  156. -<src/gcode/geometry/G17-G19.cpp>
  157. -<src/gcode/geometry/G53-G59.cpp>
  158. -<src/gcode/geometry/M206_M428.cpp>
  159. -<src/gcode/host/M16.cpp>
  160. -<src/gcode/host/M113.cpp>
  161. -<src/gcode/host/M360.cpp>
  162. -<src/gcode/host/M876.cpp>
  163. -<src/gcode/lcd/M0_M1.cpp>
  164. -<src/gcode/lcd/M250.cpp>
  165. -<src/gcode/lcd/M73.cpp>
  166. -<src/gcode/lcd/M995.cpp>
  167. -<src/gcode/motion/G2_G3.cpp>
  168. -<src/gcode/motion/G5.cpp>
  169. -<src/gcode/motion/G80.cpp>
  170. -<src/gcode/motion/M290.cpp>
  171. -<src/gcode/probe/G30.cpp>
  172. -<src/gcode/probe/G31_G32.cpp>
  173. -<src/gcode/probe/G38.cpp>
  174. -<src/gcode/probe/M401_M402.cpp>
  175. -<src/gcode/probe/M851.cpp>
  176. -<src/gcode/probe/M951.cpp>
  177. -<src/gcode/scara>
  178. -<src/gcode/sd>
  179. -<src/gcode/temp/M104_M109.cpp>
  180. -<src/gcode/temp/M155.cpp>
  181. -<src/gcode/units/G20_G21.cpp>
  182. -<src/gcode/units/M149.cpp>
  183. -<src/libs/BL24CXX.cpp> -<src/libs/W25Qxx.cpp>
  184. -<src/libs/L64XX> -<src/module/stepper/L64xx.cpp>
  185. -<src/libs/hex_print.cpp>
  186. -<src/libs/least_squares_fit.cpp>
  187. -<src/libs/nozzle.cpp> -<src/gcode/feature/clean>
  188. -<src/module/delta.cpp>
  189. -<src/module/planner_bezier.cpp>
  190. -<src/module/printcounter.cpp>
  191. -<src/module/probe.cpp>
  192. -<src/module/scara.cpp> -<src/gcode/calibrate/M665.cpp>
  193. -<src/module/stepper/TMC26X.cpp>
  194. extra_scripts =
  195. pre:buildroot/share/PlatformIO/scripts/common-dependencies.py
  196. pre:buildroot/share/PlatformIO/scripts/common-cxxflags.py
  197. post:buildroot/share/PlatformIO/scripts/common-dependencies-post.py
  198. build_flags = -fmax-errors=5 -g -D__MARLIN_FIRMWARE__ -fmerge-all-constants
  199. lib_deps =
  200. #
  201. # Feature Dependencies
  202. #
  203. [features]
  204. HAS_TFT_LVGL_UI = lvgl=https://github.com/makerbase-mks/LVGL-6.1.1-MKS/archive/master.zip
  205. src_filter=+<src/lcd/extui/lib/mks_ui>
  206. extra_scripts=download_mks_assets.py
  207. HAS_TRINAMIC_CONFIG = TMCStepper@~0.7.1
  208. src_filter=+<src/feature/tmc_util.cpp> +<src/module/stepper/trinamic.cpp> +<src/gcode/feature/trinamic/M122.cpp> +<src/gcode/feature/trinamic/M906.cpp> +<src/gcode/feature/trinamic/M911-M914.cpp>
  209. HAS_STEALTHCHOP = src_filter=+<src/gcode/feature/trinamic/M569.cpp>
  210. SR_LCD_3W_NL = SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip
  211. HAS_MOTOR_CURRENT_I2C = SlowSoftI2CMaster
  212. src_filter=+<src/feature/digipot>
  213. HAS_TMC26X = TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
  214. src_filter=+<src/module/TMC26X.cpp>
  215. HAS_L64XX = Arduino-L6470@0.8.0
  216. src_filter=+<src/libs/L64XX> +<src/module/stepper/L64xx.cpp> +<src/gcode/feature/L6470>
  217. NEOPIXEL_LED = Adafruit NeoPixel@1.5.0
  218. src_filter=+<src/feature/leds/neopixel.cpp>
  219. MAX6675_IS_MAX31865 = Adafruit MAX31865 library@~1.1.0
  220. USES_LIQUIDCRYSTAL = LiquidCrystal@1.5.0
  221. USES_LIQUIDCRYSTAL_I2C = marcoschwartz/LiquidCrystal_I2C@1.1.4
  222. USES_LIQUIDTWI2 = LiquidTWI2@1.2.7
  223. HAS_WIRED_LCD = src_filter=+<src/lcd/lcdprint.cpp>
  224. HAS_MARLINUI_HD44780 = src_filter=+<src/lcd/HD44780>
  225. HAS_MARLINUI_U8GLIB = U8glib-HAL@~0.4.1
  226. src_filter=+<src/lcd/dogm>
  227. HAS_(FSMC|SPI)_TFT = src_filter=+<src/HAL/STM32/tft> +<src/HAL/STM32F1/tft> +<src/lcd/tft_io>
  228. HAS_FSMC_TFT = src_filter=+<src/HAL/STM32/tft/tft_fsmc.cpp> +<src/HAL/STM32F1/tft/tft_fsmc.cpp>
  229. HAS_SPI_TFT = src_filter=+<src/HAL/STM32/tft/tft_spi.cpp> +<src/HAL/STM32F1/tft/tft_spi.cpp>
  230. HAS_GRAPHICAL_TFT = src_filter=+<src/lcd/tft>
  231. DWIN_CREALITY_LCD = src_filter=+<src/lcd/dwin>
  232. IS_TFTGLCD_PANEL = src_filter=+<src/lcd/TFTGLCD>
  233. HAS_TOUCH_XPT2046 = src_filter=+<src/lcd/touch/touch_buttons.cpp>
  234. HAS_LCD_MENU = src_filter=+<src/lcd/menu>
  235. HAS_GAMES = src_filter=+<src/lcd/menu/game/game.cpp>
  236. MARLIN_BRICKOUT = src_filter=+<src/lcd/menu/game/brickout.cpp>
  237. MARLIN_INVADERS = src_filter=+<src/lcd/menu/game/invaders.cpp>
  238. MARLIN_MAZE = src_filter=+<src/lcd/menu/game/maze.cpp>
  239. MARLIN_SNAKE = src_filter=+<src/lcd/menu/game/snake.cpp>
  240. HAS_MENU_BACKLASH = src_filter=+<src/lcd/menu/menu_backlash.cpp>
  241. HAS_MENU_BED_CORNERS = src_filter=+<src/lcd/menu/menu_bed_corners.cpp>
  242. LCD_BED_LEVELING = src_filter=+<src/lcd/menu/menu_bed_leveling.cpp>
  243. HAS_MENU_CANCELOBJECT = src_filter=+<src/lcd/menu/menu_cancelobject.cpp>
  244. HAS_MENU_DELTA_CALIBRATE = src_filter=+<src/lcd/menu/menu_delta_calibrate.cpp>
  245. HAS_MENU_FILAMENT = src_filter=+<src/lcd/menu/menu_filament.cpp>
  246. LCD_INFO_MENU = src_filter=+<src/lcd/menu/menu_info.cpp>
  247. HAS_MENU_JOB_RECOVERY = src_filter=+<src/lcd/menu/menu_job_recovery.cpp>
  248. HAS_MENU_LED = src_filter=+<src/lcd/menu/menu_led.cpp>
  249. HAS_MENU_MEDIA = src_filter=+<src/lcd/menu/menu_media.cpp>
  250. HAS_MENU_MIXER = src_filter=+<src/lcd/menu/menu_mixer.cpp>
  251. HAS_MENU_MMU2 = src_filter=+<src/lcd/menu/menu_mmu2.cpp>
  252. HAS_MENU_PASSWORD = src_filter=+<src/lcd/menu/menu_password.cpp>
  253. HAS_MENU_POWER_MONITOR = src_filter=+<src/lcd/menu/menu_power_monitor.cpp>
  254. HAS_MENU_CUTTER = src_filter=+<src/lcd/menu/menu_spindle_laser.cpp>
  255. HAS_MENU_TEMPERATURE = src_filter=+<src/lcd/menu/menu_temperature.cpp>
  256. HAS_MENU_TMC = src_filter=+<src/lcd/menu/menu_tmc.cpp>
  257. HAS_MENU_TOUCH_SCREEN = src_filter=+<src/lcd/menu/menu_touch_screen.cpp>
  258. HAS_MENU_TRAMMING = src_filter=+<src/lcd/menu/menu_tramming.cpp>
  259. HAS_MENU_UBL = src_filter=+<src/lcd/menu/menu_ubl.cpp>
  260. ANYCUBIC_LCD_CHIRON = src_filter=+<src/lcd/extui/anycubic_chiron_lcd.cpp> +<src/lcd/extui/lib/anycubic_chiron>
  261. ANYCUBIC_LCD_I3MEGA = src_filter=+<src/lcd/extui/anycubic_i3mega_lcd.cpp> +<src/lcd/extui/lib/anycubic_i3mega>
  262. HAS_DGUS_LCD = src_filter=+<src/lcd/extui/lib/dgus> +<src/lcd/extui/dgus_lcd.cpp>
  263. TOUCH_UI_FTDI_EVE = src_filter=+<src/lcd/extui/lib/ftdi_eve_touch_ui>
  264. EXTUI_EXAMPLE = src_filter=+<src/lcd/extui/example.cpp>
  265. MALYAN_LCD = src_filter=+<src/lcd/extui/malyan_lcd.cpp>
  266. USB_FLASH_DRIVE_SUPPORT = src_filter=+<src/sd/usb_flashdrive>
  267. AUTO_BED_LEVELING_BILINEAR = src_filter=+<src/feature/bedlevel/abl>
  268. AUTO_BED_LEVELING_(3POINT|(BI)?LINEAR) = src_filter=+<src/gcode/bedlevel/abl>
  269. MESH_BED_LEVELING = src_filter=+<src/feature/bedlevel/mbl> +<src/gcode/bedlevel/mbl>
  270. AUTO_BED_LEVELING_UBL = src_filter=+<src/feature/bedlevel/ubl> +<src/gcode/bedlevel/ubl>
  271. BACKLASH_COMPENSATION = src_filter=+<src/feature/backlash.cpp>
  272. BARICUDA = src_filter=+<src/feature/baricuda.cpp> +<src/gcode/feature/baricuda>
  273. BINARY_FILE_TRANSFER = src_filter=+<src/feature/binary_stream.cpp> +<src/libs/heatshrink>
  274. BLTOUCH = src_filter=+<src/feature/bltouch.cpp>
  275. CANCEL_OBJECTS = src_filter=+<src/feature/cancel_object.cpp> +<src/gcode/feature/cancel>
  276. CASE_LIGHT_ENABLE = src_filter=+<src/feature/caselight.cpp> +<src/gcode/feature/caselight>
  277. EXTERNAL_CLOSED_LOOP_CONTROLLER = src_filter=+<src/feature/closedloop.cpp> +<src/gcode/calibrate/M12.cpp>
  278. USE_CONTROLLER_FAN = src_filter=+<src/feature/controllerfan.cpp>
  279. HAS_MOTOR_CURRENT_DAC = src_filter=+<src/feature/dac>
  280. DIRECT_STEPPING = src_filter=+<src/feature/direct_stepping.cpp> +<src/gcode/motion/G6.cpp>
  281. EMERGENCY_PARSER = src_filter=+<src/feature/e_parser.cpp> -<src/gcode/control/M108_*.cpp>
  282. I2C_POSITION_ENCODERS = src_filter=+<src/feature/encoder_i2c.cpp>
  283. IIC_BL24CXX_EEPROM = src_filter=+<src/libs/BL24CXX.cpp>
  284. HAS_SPI_FLASH = src_filter=+<src/libs/W25Qxx.cpp>
  285. HAS_ETHERNET = src_filter=+<src/feature/ethernet.cpp>
  286. HAS_FANMUX = src_filter=+<src/feature/fanmux.cpp>
  287. FILAMENT_WIDTH_SENSOR = src_filter=+<src/feature/filwidth.cpp> +<src/gcode/feature/filwidth>
  288. FWRETRACT = src_filter=+<src/feature/fwretract.cpp> +<src/gcode/feature/fwretract>
  289. HOST_ACTION_COMMANDS = src_filter=+<src/feature/host_actions.cpp>
  290. HOTEND_IDLE_TIMEOUT = src_filter=+<src/feature/hotend_idle.cpp>
  291. JOYSTICK = src_filter=+<src/feature/joystick.cpp>
  292. BLINKM = src_filter=+<src/feature/leds/blinkm.cpp>
  293. HAS_COLOR_LEDS = src_filter=+<src/feature/leds/leds.cpp> +<src/gcode/feature/leds/M150.cpp>
  294. PCA9533 = src_filter=+<src/feature/leds/pca9533.cpp>
  295. PCA9632 = src_filter=+<src/feature/leds/pca9632.cpp>
  296. PRINTER_EVENT_LEDS = src_filter=+<src/feature/leds/printer_event_leds.cpp>
  297. TEMP_STAT_LEDS = src_filter=+<src/feature/leds/tempstat.cpp>
  298. MAX7219_DEBUG = src_filter=+<src/feature/max7219.cpp> +<src/gcode/feature/leds/M7219.cpp>
  299. MIXING_EXTRUDER = src_filter=+<src/feature/mixing.cpp> +<src/gcode/feature/mixing/M163-M165.cpp>
  300. PRUSA_MMU2 = src_filter=+<src/feature/mmu2> +<src/gcode/feature/prusa_MMU2>
  301. PASSWORD_FEATURE = src_filter=+<src/feature/password> +<src/gcode/feature/password>
  302. ADVANCED_PAUSE_FEATURE = src_filter=+<src/feature/pause.cpp> +<src/gcode/feature/pause/M600.cpp> +<src/gcode/feature/pause/M603.cpp>
  303. AUTO_POWER_CONTROL = src_filter=+<src/feature/power.cpp>
  304. HAS_POWER_MONITOR = src_filter=+<src/feature/power_monitor.cpp> +<src/gcode/feature/power_monitor>
  305. POWER_LOSS_RECOVERY = src_filter=+<src/feature/powerloss.cpp> +<src/gcode/feature/powerloss>
  306. PROBE_TEMP_COMPENSATION = src_filter=+<src/feature/probe_temp_comp.cpp> +<src/gcode/calibrate/G76_M192_M871.cpp>
  307. HAS_FILAMENT_SENSOR = src_filter=+<src/feature/runout.cpp> +<src/gcode/feature/runout>
  308. MK2_MULTIPLEXER = src_filter=+<src/feature/snmm.cpp>
  309. EXT_SOLENOID|MANUAL_SOLENOID_CONTROL = src_filter=+<src/feature/solenoid.cpp> +<src/gcode/control/M380_M381.cpp>
  310. HAS_CUTTER = src_filter=+<src/feature/spindle_laser.cpp> +<src/gcode/control/M3-M5.cpp>
  311. EXPERIMENTAL_I2CBUS = src_filter=+<src/feature/twibus.cpp> +<src/gcode/feature/i2c>
  312. MECHANICAL_GANTRY_CAL.+ = src_filter=+<src/gcode/calibrate/G34.cpp>
  313. Z_STEPPER_AUTO_ALIGN = src_filter=+<src/feature/z_stepper_align.cpp> +<src/gcode/calibrate/G34_M422.cpp>
  314. G26_MESH_VALIDATION = src_filter=+<src/gcode/bedlevel/G26.cpp>
  315. ASSISTED_TRAMMING = src_filter=+<src/gcode/bedlevel/G35.cpp>
  316. HAS_MESH = src_filter=+<src/gcode/bedlevel/G42.cpp>
  317. HAS_LEVELING = src_filter=+<src/gcode/bedlevel/M420.cpp>
  318. DELTA_AUTO_CALIBRATION = src_filter=+<src/gcode/calibrate/G33.cpp>
  319. CALIBRATION_GCODE = src_filter=+<src/gcode/calibrate/G425.cpp>
  320. Z_MIN_PROBE_REPEATABILITY_TEST = src_filter=+<src/gcode/calibrate/M48.cpp>
  321. M100_FREE_MEMORY_WATCHER = src_filter=+<src/gcode/calibrate/M100.cpp>
  322. BACKLASH_GCODE = src_filter=+<src/gcode/calibrate/M425.cpp>
  323. IS_KINEMATIC = src_filter=+<src/gcode/calibrate/M665.cpp>
  324. HAS_EXTRA_ENDSTOPS = src_filter=+<src/gcode/calibrate/M666.cpp>
  325. SKEW_CORRECTION_GCODE = src_filter=+<src/gcode/calibrate/M852.cpp>
  326. DIRECT_PIN_CONTROL = src_filter=+<src/gcode/control/M42.cpp> +<src/gcode/control/M226.cpp>
  327. PINS_DEBUGGING = src_filter=+<src/gcode/config/M43.cpp>
  328. NO_VOLUMETRICS = src_filter=-<src/gcode/config/M200-M205.cpp>
  329. HAS_MULTI_EXTRUDER = src_filter=+<src/gcode/config/M217.cpp>
  330. HAS_HOTEND_OFFSET = src_filter=+<src/gcode/config/M218.cpp>
  331. EDITABLE_SERVO_ANGLES = src_filter=+<src/gcode/config/M281.cpp>
  332. PIDTEMP = src_filter=+<src/gcode/config/M301.cpp>
  333. PREVENT_COLD_EXTRUSION = src_filter=+<src/gcode/config/M302.cpp>
  334. PIDTEMPBED = src_filter=+<src/gcode/config/M304.cpp>
  335. HAS_USER_THERMISTORS = src_filter=+<src/gcode/config/M305.cpp>
  336. SD_ABORT_ON_ENDSTOP_HIT = src_filter=+<src/gcode/config/M540.cpp>
  337. BAUD_RATE_GCODE = src_filter=+<src/gcode/config/M575.cpp>
  338. HAS_SMART_EFF_MOD = src_filter=+<src/gcode/config/M672.cpp>
  339. COOLANT_CONTROL = src_filter=+<src/gcode/control/M7-M9.cpp>
  340. HAS_SOFTWARE_ENDSTOPS = src_filter=+<src/gcode/control/M211.cpp>
  341. HAS_DUPLICATION_MODE = src_filter=+<src/gcode/control/M605.cpp>
  342. LIN_ADVANCE = src_filter=+<src/gcode/feature/advance>
  343. PHOTO_GCODE = src_filter=+<src/gcode/feature/camera>
  344. CONTROLLER_FAN_EDITABLE = src_filter=+<src/gcode/feature/controllerfan>
  345. GCODE_MACROS = src_filter=+<src/gcode/feature/macro>
  346. GRADIENT_MIX = src_filter=+<src/gcode/feature/mixing/M166.cpp>
  347. HAS_SAVED_POSITIONS = src_filter=+<src/gcode/feature/pause/G60.cpp> +<src/gcode/feature/pause/G61.cpp>
  348. PARK_HEAD_ON_PAUSE = src_filter=+<src/gcode/feature/pause/M125.cpp>
  349. FILAMENT_LOAD_UNLOAD_GCODES = src_filter=+<src/gcode/feature/pause/M701_M702.cpp>
  350. CNC_WORKSPACE_PLANES = src_filter=+<src/gcode/geometry/G17-G19.cpp>
  351. CNC_COORDINATE_SYSTEMS = src_filter=+<src/gcode/geometry/G53-G59.cpp>
  352. HAS_M206_COMMAND = src_filter=+<src/gcode/geometry/M206_M428.cpp>
  353. EXPECTED_PRINTER_CHECK = src_filter=+<src/gcode/host/M16.cpp>
  354. HOST_KEEPALIVE_FEATURE = src_filter=+<src/gcode/host/M113.cpp>
  355. REPETIER_GCODE_M360 = src_filter=+<src/gcode/host/M360.cpp>
  356. HAS_GCODE_M876 = src_filter=+<src/gcode/host/M876.cpp>
  357. HAS_RESUME_CONTINUE = src_filter=+<src/gcode/lcd/M0_M1.cpp>
  358. HAS_LCD_CONTRAST = src_filter=+<src/gcode/lcd/M250.cpp>
  359. LCD_SET_PROGRESS_MANUALLY = src_filter=+<src/gcode/lcd/M73.cpp>
  360. TOUCH_SCREEN_CALIBRATION = src_filter=+<src/gcode/lcd/M995.cpp>
  361. ARC_SUPPORT = src_filter=+<src/gcode/motion/G2_G3.cpp>
  362. GCODE_MOTION_MODES = src_filter=+<src/gcode/motion/G80.cpp>
  363. BABYSTEPPING = src_filter=+<src/gcode/motion/M290.cpp> +<src/feature/babystep.cpp>
  364. Z_PROBE_SLED = src_filter=+<src/gcode/probe/G31_G32.cpp>
  365. G38_PROBE_TARGET = src_filter=+<src/gcode/probe/G38.cpp>
  366. MAGNETIC_PARKING_EXTRUDER = src_filter=+<src/gcode/probe/M951.cpp>
  367. SDSUPPORT = src_filter=+<src/gcode/sd>
  368. HAS_EXTRUDERS = src_filter=+<src/gcode/temp/M104_M109.cpp> +<src/gcode/config/M221.cpp>
  369. AUTO_REPORT_TEMPERATURES = src_filter=+<src/gcode/temp/M155.cpp>
  370. INCH_MODE_SUPPORT = src_filter=+<src/gcode/units/G20_G21.cpp>
  371. TEMPERATURE_UNITS_SUPPORT = src_filter=+<src/gcode/units/M149.cpp>
  372. NEED_HEX_PRINT = src_filter=+<src/libs/hex_print.cpp>
  373. NEED_LSF = src_filter=+<src/libs/least_squares_fit.cpp>
  374. NOZZLE_PARK_FEATURE = src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/pause/G27.cpp>
  375. NOZZLE_CLEAN_FEATURE = src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/clean>
  376. DELTA = src_filter=+<src/module/delta.cpp> +<src/gcode/calibrate/M666.cpp>
  377. BEZIER_CURVE_SUPPORT = src_filter=+<src/module/planner_bezier.cpp> +<src/gcode/motion/G5.cpp>
  378. PRINTCOUNTER = src_filter=+<src/module/printcounter.cpp>
  379. HAS_BED_PROBE = src_filter=+<src/module/probe.cpp> +<src/gcode/probe/G30.cpp> +<src/gcode/probe/M401_M402.cpp> +<src/gcode/probe/M851.cpp>
  380. IS_SCARA = src_filter=+<src/module/scara.cpp>
  381. MORGAN_SCARA = src_filter=+<src/gcode/scara>
  382. (ESP3D_)?WIFISUPPORT = AsyncTCP, ESP Async WebServer
  383. ESP3DLib=https://github.com/luc-github/ESP3DLib.git
  384. arduinoWebSockets=https://github.com/Links2004/arduinoWebSockets.git
  385. ESP32SSDP=https://github.com/luc-github/ESP32SSDP.git
  386. lib_ignore=ESPAsyncTCP
  387. #
  388. # Default values apply to all 'env:' prefixed environments
  389. #
  390. [env]
  391. framework = arduino
  392. extra_scripts = ${common.extra_scripts}
  393. build_flags = ${common.build_flags}
  394. lib_deps = ${common.lib_deps}
  395. monitor_speed = 250000
  396. monitor_flags =
  397. --quiet
  398. --echo
  399. --eol
  400. LF
  401. --filter
  402. colorize
  403. --filter
  404. time
  405. #################################
  406. # #
  407. # Unique Core Architectures #
  408. # #
  409. # Add a new "env" below if no #
  410. # entry has values suitable to #
  411. # build for a given board. #
  412. # #
  413. #################################
  414. #################################
  415. # #
  416. # AVR Architecture #
  417. # #
  418. #################################
  419. #
  420. # AVR (8-bit) Common Environment values
  421. #
  422. [common_avr8]
  423. board_build.f_cpu = 16000000L
  424. src_filter = ${common.default_src_filter} +<src/HAL/AVR>
  425. #
  426. # ATmega2560
  427. #
  428. [env:mega2560]
  429. platform = atmelavr
  430. extends = common_avr8
  431. board = megaatmega2560
  432. #
  433. # ATmega2560 with extended pins 70-85 defined
  434. # BOARD_BQ_ZUM_MEGA_3D
  435. # BOARD_ULTIMAIN_2
  436. # BOARD_MIGHTYBOARD_REVE
  437. # BOARD_EINSTART_S
  438. #
  439. [env:mega2560ext]
  440. platform = atmelavr
  441. extends = env:mega2560
  442. board = megaatmega2560
  443. board_build.variant = megaextendedpins
  444. extra_scripts = ${common.extra_scripts}
  445. pre:buildroot/share/PlatformIO/scripts/copy_marlin_variant_to_framework.py
  446. #
  447. # ATmega1280
  448. #
  449. [env:mega1280]
  450. platform = atmelavr
  451. extends = common_avr8
  452. board = megaatmega1280
  453. #
  454. # MightyBoard ATmega2560 (MegaCore 100 pin boards variants)
  455. #
  456. [env:MightyBoard1280]
  457. platform = atmelavr
  458. extends = common_avr8
  459. board = ATmega1280
  460. upload_speed = 57600
  461. #
  462. # MightyBoard ATmega2560 (MegaCore 100 pin boards variants)
  463. #
  464. [env:MightyBoard2560]
  465. platform = atmelavr
  466. extends = common_avr8
  467. board = ATmega2560
  468. upload_protocol = wiring
  469. upload_speed = 57600
  470. board_upload.maximum_size = 253952
  471. #
  472. # RAMBo
  473. #
  474. [env:rambo]
  475. platform = atmelavr
  476. extends = common_avr8
  477. board = reprap_rambo
  478. #
  479. # FYSETC F6 V1.3
  480. #
  481. [env:FYSETC_F6_13]
  482. platform = atmelavr
  483. extends = common_avr8
  484. board = fysetc_f6_13
  485. #
  486. # FYSETC F6 V1.4
  487. #
  488. [env:FYSETC_F6_14]
  489. platform = atmelavr
  490. extends = common_avr8
  491. board = fysetc_f6_14
  492. #
  493. # Sanguinololu (ATmega644p)
  494. #
  495. [env:sanguino644p]
  496. platform = atmelavr
  497. extends = common_avr8
  498. board = sanguino_atmega644p
  499. #
  500. # Sanguinololu (ATmega1284p)
  501. #
  502. [env:sanguino1284p]
  503. platform = atmelavr
  504. extends = common_avr8
  505. board = sanguino_atmega1284p
  506. board_upload.maximum_size = 126976
  507. #
  508. # Melzi and clones (ATmega1284p)
  509. #
  510. [env:melzi]
  511. platform = atmelavr
  512. extends = env:sanguino1284p
  513. upload_speed = 57600
  514. #
  515. # Sanguinololu (ATmega1284p stock bootloader with tuned flags)
  516. #
  517. [tuned_1284p]
  518. build_flags = ${common.build_flags} -fno-tree-scev-cprop -fno-split-wide-types -Wl,--relax -mcall-prologues
  519. [env:sanguino1284p_optimized]
  520. platform = atmelavr
  521. extends = env:melzi
  522. build_flags = ${tuned_1284p.build_flags}
  523. #
  524. # Melzi and clones (alias for sanguino1284p_optimized)
  525. #
  526. [env:melzi_optimized]
  527. platform = atmelavr
  528. extends = env:sanguino1284p_optimized
  529. #
  530. # Melzi and clones (Optiboot bootloader)
  531. #
  532. [env:melzi_optiboot]
  533. platform = atmelavr
  534. extends = common_avr8
  535. board = sanguino_atmega1284p
  536. upload_speed = 115200
  537. #
  538. # Melzi and clones (Zonestar Melzi2 with tuned flags)
  539. #
  540. [env:melzi_optiboot_optimized]
  541. platform = atmelavr
  542. extends = env:melzi_optiboot
  543. build_flags = ${tuned_1284p.build_flags}
  544. #
  545. # AT90USB1286 boards using CDC bootloader
  546. # - BRAINWAVE
  547. # - BRAINWAVE_PRO
  548. # - SAV_MKI
  549. # - TEENSYLU
  550. #
  551. [env:at90usb1286_cdc]
  552. platform = teensy
  553. extends = common_avr8
  554. board = at90usb1286
  555. lib_ignore = ${env:common_avr8.lib_ignore}, Teensy_ADC, NativeEthernet
  556. #
  557. # AT90USB1286 boards using DFU bootloader
  558. # - PrintrBoard
  559. # - PrintrBoard Rev.F
  560. # - ? 5DPRINT ?
  561. #
  562. [env:at90usb1286_dfu]
  563. platform = teensy
  564. extends = env:at90usb1286_cdc
  565. #################################
  566. # #
  567. # DUE Architecture #
  568. # #
  569. #################################
  570. #
  571. # Due (Atmel SAM3X8E ARM Cortex-M3)
  572. #
  573. # - RAMPS4DUE
  574. # - RADDS
  575. #
  576. [env:DUE]
  577. platform = atmelsam
  578. board = due
  579. src_filter = ${common.default_src_filter} +<src/HAL/DUE> +<src/HAL/shared/backtrace>
  580. [env:DUE_USB]
  581. platform = atmelsam
  582. extends = env:DUE
  583. board = dueUSB
  584. [env:DUE_debug]
  585. # Used when WATCHDOG_RESET_MANUAL is enabled
  586. platform = atmelsam
  587. extends = env:DUE
  588. build_flags = ${common.build_flags}
  589. -funwind-tables
  590. -mpoke-function-name
  591. #
  592. # Archim SAM
  593. #
  594. [common_DUE_archim]
  595. platform = atmelsam
  596. extends = env:DUE
  597. board = archim
  598. build_flags = ${common.build_flags}
  599. -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSBCON
  600. board_build.variants_dir = buildroot/share/PlatformIO/variants/
  601. extra_scripts = ${common.extra_scripts}
  602. Marlin/src/HAL/DUE/upload_extra_script.py
  603. [env:DUE_archim]
  604. platform = ${common_DUE_archim.platform}
  605. extends = common_DUE_archim
  606. # Used when WATCHDOG_RESET_MANUAL is enabled
  607. [env:DUE_archim_debug]
  608. platform = ${common_DUE_archim.platform}
  609. extends = common_DUE_archim
  610. build_flags = ${common_DUE_archim.build_flags} -funwind-tables -mpoke-function-name
  611. #################################
  612. # #
  613. # SAMD51 Architecture #
  614. # #
  615. #################################
  616. #
  617. # Adafruit Grand Central M4 (Atmel SAMD51P20A ARM Cortex-M4)
  618. #
  619. [env:SAMD51_grandcentral_m4]
  620. platform = atmelsam
  621. board = adafruit_grandcentral_m4
  622. build_flags = ${common.build_flags} -std=gnu++17
  623. build_unflags = -std=gnu++11
  624. src_filter = ${common.default_src_filter} +<src/HAL/SAMD51>
  625. lib_deps = ${common.lib_deps}
  626. SoftwareSerialM
  627. Adafruit SPIFlash
  628. custom_marlin.SDSUPPORT = SdFat - Adafruit Fork
  629. debug_tool = jlink
  630. #################################
  631. # #
  632. # LPC176x Architecture #
  633. # #
  634. #################################
  635. #
  636. # NXP LPC176x ARM Cortex-M3
  637. #
  638. [common_LPC]
  639. platform = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.3.zip
  640. platform_packages = framework-arduino-lpc176x@^0.2.5
  641. board = nxp_lpc1768
  642. lib_ldf_mode = off
  643. lib_compat_mode = strict
  644. extra_scripts = ${common.extra_scripts}
  645. Marlin/src/HAL/LPC1768/upload_extra_script.py
  646. src_filter = ${common.default_src_filter} +<src/HAL/LPC1768> +<src/HAL/shared/backtrace>
  647. lib_deps = ${common.lib_deps}
  648. Servo
  649. custom_marlin.USES_LIQUIDCRYSTAL = LiquidCrystal@1.0.0
  650. custom_marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/1.5.0.zip
  651. build_flags = ${common.build_flags} -DU8G_HAL_LINKS -IMarlin/src/HAL/LPC1768/include -IMarlin/src/HAL/LPC1768/u8g
  652. # debug options for backtrace
  653. #-funwind-tables
  654. #-mpoke-function-name
  655. #
  656. # NXP LPC176x ARM Cortex-M3
  657. #
  658. [env:LPC1768]
  659. platform = ${common_LPC.platform}
  660. extends = common_LPC
  661. board = nxp_lpc1768
  662. [env:LPC1769]
  663. platform = ${common_LPC.platform}
  664. extends = common_LPC
  665. board = nxp_lpc1769
  666. #################################
  667. # #
  668. # STM32 Architecture #
  669. # #
  670. #################################
  671. #
  672. # HAL/STM32 Base Environment values
  673. #
  674. [common_stm32]
  675. platform = ststm32@~8.0
  676. build_flags = ${common.build_flags}
  677. -std=gnu++14
  678. -DUSBCON -DUSBD_USE_CDC
  679. -DTIM_IRQ_PRIO=13
  680. build_unflags = -std=gnu++11
  681. src_filter = ${common.default_src_filter} +<src/HAL/STM32> +<src/HAL/shared/backtrace>
  682. #
  683. # HAL/STM32F1 Common Environment values
  684. #
  685. [common_stm32f1]
  686. platform = ststm32@~6.1
  687. build_flags = !python Marlin/src/HAL/STM32F1/build_flags.py
  688. ${common.build_flags}
  689. build_unflags = -std=gnu11 -std=gnu++11
  690. src_filter = ${common.default_src_filter} +<src/HAL/STM32F1>
  691. lib_ignore = SPI
  692. lib_deps = ${common.lib_deps}
  693. SoftwareSerialM
  694. #
  695. # STM32F103RC
  696. #
  697. [env:STM32F103RC]
  698. platform = ${common_stm32f1.platform}
  699. extends = common_stm32f1
  700. board = genericSTM32F103RC
  701. platform_packages = tool-stm32duino
  702. monitor_speed = 115200
  703. #
  704. # MEEB_3DP (STM32F103RCT6 with 512K)
  705. #
  706. [env:STM32F103RC_meeb]
  707. platform = ${common_stm32f1.platform}
  708. extends = common_stm32f1
  709. board = MEEB_3DP
  710. platform_packages = tool-stm32duino
  711. build_flags = ${common_stm32f1.build_flags}
  712. -DDEBUG_LEVEL=0
  713. -DSS_TIMER=4
  714. -DSTM32_FLASH_SIZE=512
  715. -DHSE_VALUE=12000000U
  716. -DUSE_USB_COMPOSITE
  717. -DVECT_TAB_OFFSET=0x2000
  718. -DGENERIC_BOOTLOADER
  719. extra_scripts = ${common.extra_scripts}
  720. pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py
  721. buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP.py
  722. lib_deps = ${common.lib_deps}
  723. SoftwareSerialM
  724. USBComposite for STM32F1@0.91
  725. custom_marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/ccccmagicboy/Adafruit_NeoPixel#meeb_3dp_use
  726. debug_tool = stlink
  727. upload_protocol = dfu
  728. #
  729. # STM32F103RC_fysetc
  730. #
  731. [env:STM32F103RC_fysetc]
  732. platform = ${common_stm32f1.platform}
  733. extends = env:STM32F103RC
  734. extra_scripts = ${common.extra_scripts}
  735. buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py
  736. build_flags = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=0
  737. lib_ldf_mode = chain
  738. debug_tool = stlink
  739. upload_protocol = serial
  740. #
  741. # BigTree SKR Mini V1.1 / SKR mini E3 / SKR E3 DIP (STM32F103RCT6 ARM Cortex-M3)
  742. #
  743. # STM32F103RC_btt ............. RCT6 with 256K
  744. # STM32F103RC_btt_USB ......... RCT6 with 256K (USB mass storage)
  745. # STM32F103RC_btt_512K ........ RCT6 with 512K
  746. # STM32F103RC_btt_512K_USB .... RCT6 with 512K (USB mass storage)
  747. #
  748. # WARNING! If you have an SKR Mini v1.1 or an SKR Mini E3 1.0 / 1.2 / 2.0 / DIP
  749. # and experience a printer freeze, re-flash Marlin using the regular (non-512K)
  750. # build option. 256K chips may be re-branded 512K chips, but this means the
  751. # upper 256K is sketchy, and failure is very likely.
  752. #
  753. [env:STM32F103RC_btt]
  754. platform = ${common_stm32f1.platform}
  755. extends = env:STM32F103RC
  756. extra_scripts = ${common.extra_scripts}
  757. buildroot/share/PlatformIO/scripts/STM32F103RC_SKR_MINI.py
  758. build_flags = ${common_stm32f1.build_flags}
  759. -DDEBUG_LEVEL=0 -DSS_TIMER=4
  760. monitor_speed = 115200
  761. [env:STM32F103RC_btt_USB]
  762. platform = ${common_stm32f1.platform}
  763. extends = env:STM32F103RC_btt
  764. build_flags = ${env:STM32F103RC_btt.build_flags} -DUSE_USB_COMPOSITE
  765. lib_deps = ${env:STM32F103RC_btt.lib_deps}
  766. USBComposite for STM32F1@0.91
  767. [env:STM32F103RC_btt_512K]
  768. platform = ${common_stm32f1.platform}
  769. extends = env:STM32F103RC_btt
  770. board_upload.maximum_size=524288
  771. build_flags = ${env:STM32F103RC_btt.build_flags} -DSTM32_FLASH_SIZE=512
  772. [env:STM32F103RC_btt_512K_USB]
  773. platform = ${common_stm32f1.platform}
  774. extends = env:STM32F103RC_btt_512K
  775. build_flags = ${env:STM32F103RC_btt_512K.build_flags} -DUSE_USB_COMPOSITE
  776. lib_deps = ${env:STM32F103RC_btt_512K.lib_deps}
  777. USBComposite for STM32F1@0.91
  778. #
  779. # STM32F103RE
  780. #
  781. [env:STM32F103RE]
  782. platform = ${common_stm32f1.platform}
  783. extends = common_stm32f1
  784. board = genericSTM32F103RE
  785. platform_packages = tool-stm32duino
  786. monitor_speed = 115200
  787. #
  788. # STM32F103RE_btt ............. RET6
  789. # STM32F103RE_btt_USB ......... RET6 (USB mass storage)
  790. #
  791. [env:STM32F103RE_btt]
  792. platform = ${common_stm32f1.platform}
  793. extends = env:STM32F103RE
  794. extra_scripts = ${common.extra_scripts}
  795. buildroot/share/PlatformIO/scripts/STM32F103RE_SKR_E3_DIP.py
  796. build_flags = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=0 -DSS_TIMER=4
  797. debug_tool = stlink
  798. upload_protocol = stlink
  799. [env:STM32F103RE_btt_USB]
  800. platform = ${common_stm32f1.platform}
  801. extends = env:STM32F103RE_btt
  802. build_flags = ${env:STM32F103RE_btt.build_flags} -DUSE_USB_COMPOSITE
  803. lib_deps = ${common_stm32f1.lib_deps}
  804. USBComposite for STM32F1@0.91
  805. #
  806. # STM32F4 with STM32GENERIC
  807. #
  808. [env:STM32F4]
  809. platform = ${common_stm32.platform}
  810. board = disco_f407vg
  811. build_flags = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F4 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB -DHAL_IWDG_MODULE_ENABLED
  812. src_filter = ${common.default_src_filter} +<src/HAL/STM32_F4_F7> -<src/HAL/STM32_F4_F7/STM32F7>
  813. #
  814. # STM32F7 with STM32GENERIC
  815. #
  816. [env:STM32F7]
  817. platform = ${common_stm32.platform}
  818. board = remram_v1
  819. build_flags = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F7 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB -DHAL_IWDG_MODULE_ENABLED
  820. src_filter = ${common.default_src_filter} +<src/HAL/STM32_F4_F7> -<src/HAL/STM32_F4_F7/STM32F4>
  821. #
  822. # ST NUCLEO-F767ZI Development Board
  823. # This environment is for testing purposes prior to control boards
  824. # being readily available based on STM32F7 MCUs
  825. #
  826. [env:NUCLEO_F767ZI]
  827. platform = ${common_stm32.platform}
  828. extends = common_stm32
  829. board = nucleo_f767zi
  830. build_flags = ${common_stm32.build_flags} -DTIMER_SERIAL=TIM9
  831. #
  832. # ARMED (STM32)
  833. #
  834. [env:ARMED]
  835. platform = ${common_stm32.platform}
  836. extends = common_stm32
  837. board = armed_v1
  838. build_flags = ${common_stm32.build_flags}
  839. -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing
  840. #
  841. # Geeetech GTM32 (STM32F103VET6)
  842. #
  843. [env:STM32F103VE_GTM32]
  844. platform = ${common_stm32f1.platform}
  845. extends = common_stm32f1
  846. board = genericSTM32F103VE
  847. build_flags = ${common_stm32f1.build_flags}
  848. -ffunction-sections -fdata-sections -nostdlib -MMD
  849. -DMCU_STM32F103VE -DARDUINO_GENERIC_STM32F103V -DARDUINO_ARCH_STM32F1 -DBOARD_generic_stm32f103v
  850. -DDEBUG_LEVEL=DEBUG_NONE -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DVECT_TAB_ADDR=0x8000000
  851. -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
  852. upload_protocol = serial
  853. #
  854. # Longer 3D board in Alfawise U20 (STM32F103VET6)
  855. #
  856. [env:STM32F103VE_longer]
  857. platform = ${common_stm32f1.platform}
  858. extends = common_stm32f1
  859. board = genericSTM32F103VE
  860. extra_scripts = ${common.extra_scripts}
  861. buildroot/share/PlatformIO/scripts/STM32F103VE_longer.py
  862. build_flags = ${common_stm32f1.build_flags}
  863. -DMCU_STM32F103VE -DSTM32F1xx -USERIAL_USB -DU20 -DTS_V12
  864. build_unflags = ${common_stm32f1.build_unflags}
  865. -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
  866. lib_ignore = ${common_stm32f1.lib_ignore}
  867. #
  868. # MKS Robin Mini (STM32F103VET6)
  869. #
  870. [env:mks_robin_mini]
  871. platform = ${common_stm32f1.platform}
  872. extends = common_stm32f1
  873. board = genericSTM32F103VE
  874. extra_scripts = ${common.extra_scripts}
  875. buildroot/share/PlatformIO/scripts/mks_robin_mini.py
  876. build_flags = ${common_stm32f1.build_flags}
  877. -DMCU_STM32F103VE
  878. #
  879. # MKS Robin Nano (STM32F103VET6)
  880. #
  881. [env:mks_robin_nano35]
  882. platform = ${common_stm32f1.platform}
  883. extends = common_stm32f1
  884. board = genericSTM32F103VE
  885. platform_packages = tool-stm32duino
  886. extra_scripts = ${common.extra_scripts}
  887. buildroot/share/PlatformIO/scripts/mks_robin_nano35.py
  888. build_flags = ${common_stm32f1.build_flags}
  889. -DMCU_STM32F103VE -DSS_TIMER=4
  890. debug_tool = jlink
  891. upload_protocol = jlink
  892. #
  893. # MKS Robin (STM32F103ZET6)
  894. #
  895. [env:mks_robin]
  896. platform = ${common_stm32f1.platform}
  897. extends = common_stm32f1
  898. board = genericSTM32F103ZE
  899. extra_scripts = ${common.extra_scripts}
  900. buildroot/share/PlatformIO/scripts/mks_robin.py
  901. build_flags = ${common_stm32f1.build_flags}
  902. -DSS_TIMER=4 -DSTM32_XL_DENSITY
  903. # MKS Robin (STM32F103ZET6)
  904. # Uses HAL STM32 to support Marlin UI for TFT screen with optional touch panel
  905. #
  906. [env:mks_robin_stm32]
  907. platform = ${common_stm32.platform}
  908. extends = common_stm32
  909. board = genericSTM32F103ZE
  910. board_build.core = stm32
  911. board_build.variant = MARLIN_F103Zx
  912. board_build.ldscript = ldscript.ld
  913. board_build.offset = 0x7000
  914. board_build.firmware = Robin.bin
  915. build_flags = ${common_stm32.build_flags}
  916. -DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8
  917. build_unflags = ${common_stm32.build_unflags}
  918. -DUSBCON -DUSBD_USE_CDC
  919. extra_scripts = ${common.extra_scripts}
  920. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  921. buildroot/share/PlatformIO/scripts/stm32_bootloader.py
  922. buildroot/share/PlatformIO/scripts/mks_encrypt.py
  923. lib_deps =
  924. #
  925. # MKS Robin Pro (STM32F103ZET6)
  926. #
  927. [env:mks_robin_pro]
  928. platform = ${common_stm32f1.platform}
  929. extends = env:mks_robin
  930. extra_scripts = ${common.extra_scripts}
  931. buildroot/share/PlatformIO/scripts/mks_robin_pro.py
  932. #
  933. # TRIGORILLA PRO (STM32F103ZET6)
  934. #
  935. [env:trigorilla_pro]
  936. platform = ${common_stm32f1.platform}
  937. extends = env:mks_robin
  938. extra_scripts = ${common.extra_scripts}
  939. #
  940. # MKS Robin E3D (STM32F103RCT6) and
  941. # MKS Robin E3 with TMC2209
  942. #
  943. [env:mks_robin_e3]
  944. platform = ${common_stm32f1.platform}
  945. extends = common_stm32f1
  946. board = genericSTM32F103RC
  947. platform_packages = tool-stm32duino
  948. extra_scripts = ${common.extra_scripts}
  949. buildroot/share/PlatformIO/scripts/mks_robin_e3.py
  950. build_flags = ${common_stm32f1.build_flags}
  951. -DDEBUG_LEVEL=0 -DSS_TIMER=4
  952. #
  953. # MKS Robin E3p (STM32F103VET6)
  954. # - LVGL UI
  955. #
  956. [env:mks_robin_e3p]
  957. platform = ${common_stm32f1.platform}
  958. extends = common_stm32f1
  959. board = genericSTM32F103VE
  960. platform_packages = tool-stm32duino
  961. extra_scripts = ${common.extra_scripts}
  962. buildroot/share/PlatformIO/scripts/mks_robin_e3p.py
  963. build_flags = ${common_stm32f1.build_flags}
  964. -DMCU_STM32F103VE -DSS_TIMER=4
  965. debug_tool = jlink
  966. upload_protocol = jlink
  967. #
  968. # MKS Robin Lite/Lite2 (STM32F103RCT6)
  969. #
  970. [env:mks_robin_lite]
  971. platform = ${common_stm32f1.platform}
  972. extends = common_stm32f1
  973. board = genericSTM32F103RC
  974. extra_scripts = ${common.extra_scripts}
  975. buildroot/share/PlatformIO/scripts/mks_robin_lite.py
  976. #
  977. # MKS ROBIN LITE3 (STM32F103RCT6)
  978. #
  979. [env:mks_robin_lite3]
  980. platform = ${common_stm32f1.platform}
  981. extends = common_stm32f1
  982. board = genericSTM32F103RC
  983. extra_scripts = ${common.extra_scripts}
  984. buildroot/share/PlatformIO/scripts/mks_robin_lite3.py
  985. #
  986. # JGAurora A5S A1 (STM32F103ZET6)
  987. #
  988. [env:jgaurora_a5s_a1]
  989. platform = ${common_stm32f1.platform}
  990. extends = common_stm32f1
  991. board = genericSTM32F103ZE
  992. extra_scripts = ${common.extra_scripts}
  993. buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py
  994. build_flags = ${common_stm32f1.build_flags}
  995. -DSTM32F1xx -DSTM32_XL_DENSITY
  996. #
  997. # Malyan M200 (STM32F103CB)
  998. #
  999. [env:STM32F103CB_malyan]
  1000. platform = ${common_stm32f1.platform}
  1001. extends = common_stm32f1
  1002. board = malyanM200
  1003. build_flags = ${common_stm32f1.build_flags}
  1004. -DMCU_STM32F103CB -D__STM32F1__=1 -std=c++1y -DSERIAL_USB -ffunction-sections -fdata-sections
  1005. -Wl,--gc-sections -DDEBUG_LEVEL=0 -D__MARLIN_FIRMWARE__
  1006. lib_ignore = ${common_stm32f1.lib_ignore}
  1007. SoftwareSerialM
  1008. #
  1009. # Malyan M200 v2 (STM32F070RB)
  1010. #
  1011. [env:STM32F070RB_malyan]
  1012. platform = ${common_stm32.platform}
  1013. extends = common_stm32
  1014. board = malyanM200v2
  1015. build_flags = ${common_stm32.build_flags} -DHAL_PCD_MODULE_ENABLED
  1016. -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing
  1017. -DCUSTOM_STARTUP_FILE
  1018. #
  1019. # Malyan M200 v2 (STM32F070CB)
  1020. #
  1021. [env:STM32F070CB_malyan]
  1022. platform = ${common_stm32.platform}
  1023. extends = common_stm32
  1024. board = malyanm200_f070cb
  1025. build_flags = ${common_stm32.build_flags}
  1026. -DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB -DHAL_UART_MODULE_ENABLED -DCUSTOM_STARTUP_FILE
  1027. #
  1028. # Malyan M300 (STM32F070CB)
  1029. #
  1030. [env:malyan_M300]
  1031. platform = ${common_stm32.platform}
  1032. extends = common_stm32
  1033. board = malyanm300_f070cb
  1034. build_flags = ${common_stm32.build_flags}
  1035. -DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB -DHAL_UART_MODULE_ENABLED
  1036. src_filter = ${common.default_src_filter} +<src/HAL/STM32>
  1037. #
  1038. # Chitu boards like Tronxy X5s (STM32F103ZET6)
  1039. #
  1040. [env:chitu_f103]
  1041. platform = ${common_stm32f1.platform}
  1042. extends = common_stm32f1
  1043. board = CHITU_F103
  1044. extra_scripts = pre:buildroot/share/PlatformIO/scripts/common-dependencies.py
  1045. pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py
  1046. buildroot/share/PlatformIO/scripts/chitu_crypt.py
  1047. build_flags = ${common_stm32f1.build_flags}
  1048. -DSTM32F1xx -DSTM32_XL_DENSITY
  1049. build_unflags = ${common_stm32f1.build_unflags}
  1050. -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG= -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
  1051. #
  1052. # Some Chitu V5 boards have a problem with GPIO init.
  1053. # Use this target if G28 or G29 are always failing.
  1054. #
  1055. [env:chitu_v5_gpio_init]
  1056. platform = ${common_stm32f1.platform}
  1057. extends = env:chitu_f103
  1058. build_flags = ${env:chitu_f103.build_flags} -DCHITU_V5_Z_MIN_BUGFIX
  1059. #
  1060. # Creality (STM32F103RET6)
  1061. #
  1062. [env:STM32F103RET6_creality]
  1063. platform = ${env:STM32F103RE.platform}
  1064. extends = env:STM32F103RE
  1065. build_flags = ${env:STM32F103RE.build_flags} -DTEMP_TIMER_CHAN=4
  1066. extra_scripts = ${env:STM32F103RE.extra_scripts}
  1067. pre:buildroot/share/PlatformIO/scripts/random-bin.py
  1068. buildroot/share/PlatformIO/scripts/creality.py
  1069. debug_tool = jlink
  1070. upload_protocol = jlink
  1071. #
  1072. # FLSUN QQ (STM32F103VET6)
  1073. #
  1074. [env:flsun_hispeed]
  1075. platform = ${common_stm32f1.platform}
  1076. extends = common_stm32f1
  1077. board = genericSTM32F103VE
  1078. platform_packages = tool-stm32duino
  1079. extra_scripts = ${common.extra_scripts}
  1080. buildroot/share/PlatformIO/scripts/mks_robin_mini.py
  1081. buildroot/share/PlatformIO/scripts/add_nanolib.py
  1082. build_flags = ${common_stm32f1.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4
  1083. lib_deps = SoftwareSerialM
  1084. #Adafruit NeoPixel=https://github.com/Foxies-CSTL/Robin-NeoPixel-Lib/archive/master.zip
  1085. #
  1086. # STM32F401VE
  1087. # 'STEVAL-3DP001V1' STM32F401VE board - https://www.st.com/en/evaluation-tools/steval-3dp001v1.html
  1088. #
  1089. [env:STM32F401VE_STEVAL]
  1090. platform = ${common_stm32.platform}
  1091. extends = common_stm32
  1092. board = STEVAL_STM32F401VE
  1093. build_flags = ${common_stm32.build_flags}
  1094. -DARDUINO_STEVAL -DSTM32F401xE
  1095. -DDISABLE_GENERIC_SERIALUSB -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
  1096. extra_scripts = ${common.extra_scripts}
  1097. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1098. buildroot/share/PlatformIO/scripts/STEVAL__F401XX.py
  1099. #
  1100. # FLYF407ZG
  1101. #
  1102. [env:FLYF407ZG]
  1103. platform = ${common_stm32.platform}
  1104. extends = common_stm32
  1105. board = FLYF407ZG
  1106. build_flags = ${common_stm32.build_flags}
  1107. -DVECT_TAB_OFFSET=0x8000
  1108. extra_scripts = ${common.extra_scripts}
  1109. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1110. #
  1111. # FLY MINI(stm32f103rct6)
  1112. #
  1113. [env:FLY_MINI]
  1114. platform = ${common_stm32f1.platform}
  1115. extends = common_stm32f1
  1116. board = genericSTM32F103RC
  1117. platform_packages = tool-stm32duino
  1118. extra_scripts = ${common.extra_scripts}
  1119. buildroot/share/PlatformIO/scripts/fly_mini.py
  1120. build_flags = ${common_stm32f1.build_flags}
  1121. -DDEBUG_LEVEL=0 -DSS_TIMER=4
  1122. #
  1123. # FYSETC S6 (STM32F446VET6 ARM Cortex-M4)
  1124. #
  1125. [env:FYSETC_S6]
  1126. platform = ${common_stm32.platform}
  1127. extends = common_stm32
  1128. platform_packages = tool-stm32duino
  1129. board = marlin_fysetc_s6
  1130. build_flags = ${common_stm32.build_flags}
  1131. -DVECT_TAB_OFFSET=0x10000
  1132. -DHAL_PCD_MODULE_ENABLED
  1133. extra_scripts = ${common.extra_scripts}
  1134. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1135. debug_tool = stlink
  1136. upload_protocol = dfu
  1137. upload_command = dfu-util -a 0 -s 0x08010000:leave -D "$SOURCE"
  1138. #
  1139. # STM32F407VET6 with RAMPS-like shield
  1140. # 'Black' STM32F407VET6 board - https://wiki.stm32duino.com/index.php?title=STM32F407
  1141. # Shield - https://github.com/jmz52/Hardware
  1142. #
  1143. [env:STM32F407VE_black]
  1144. platform = ${common_stm32.platform}
  1145. extends = common_stm32
  1146. board = blackSTM32F407VET6
  1147. build_flags = ${common_stm32.build_flags}
  1148. -DARDUINO_BLACK_F407VE
  1149. -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
  1150. extra_scripts = ${common.extra_scripts}
  1151. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1152. #
  1153. # BigTreeTech SKR Pro (STM32F407ZGT6 ARM Cortex-M4)
  1154. #
  1155. [env:BIGTREE_SKR_PRO]
  1156. platform = ${common_stm32.platform}
  1157. extends = common_stm32
  1158. board = BigTree_SKR_Pro
  1159. build_flags = ${common_stm32.build_flags}
  1160. -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000
  1161. extra_scripts = ${common.extra_scripts}
  1162. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1163. #upload_protocol = stlink
  1164. #upload_command = "$PROJECT_PACKAGES_DIR/tool-stm32duino/stlink/ST-LINK_CLI.exe" -c SWD -P "$BUILD_DIR/firmware.bin" 0x8008000 -Rst -Run
  1165. debug_tool = stlink
  1166. debug_init_break =
  1167. #
  1168. # Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4)
  1169. #
  1170. [env:BIGTREE_GTR_V1_0]
  1171. platform = ${common_stm32.platform}
  1172. extends = common_stm32
  1173. board = BigTree_GTR_v1
  1174. extra_scripts = ${common.extra_scripts}
  1175. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1176. build_flags = ${common_stm32.build_flags}
  1177. -DSTM32F407IX -DVECT_TAB_OFFSET=0x8000
  1178. #
  1179. # BigTreeTech BTT002 V1.0 (STM32F407VGT6 ARM Cortex-M4)
  1180. #
  1181. [env:BIGTREE_BTT002]
  1182. platform = ${common_stm32.platform}
  1183. extends = common_stm32
  1184. board = BigTree_Btt002
  1185. build_flags = ${common_stm32.build_flags}
  1186. -DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000
  1187. -DHAVE_HWSERIAL2
  1188. -DHAVE_HWSERIAL3
  1189. -DPIN_SERIAL2_RX=PD_6
  1190. -DPIN_SERIAL2_TX=PD_5
  1191. extra_scripts = ${common.extra_scripts}
  1192. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1193. #
  1194. # Lerdge base
  1195. #
  1196. [lerdge_common]
  1197. platform = ${common_stm32.platform}
  1198. extends = common_stm32
  1199. board = LERDGE
  1200. board_build.offset = 0x10000
  1201. extra_scripts = ${common.extra_scripts}
  1202. pre:buildroot/share/PlatformIO/scripts/copy_marlin_variant_to_framework.py
  1203. buildroot/share/PlatformIO/scripts/stm32_bootloader.py
  1204. buildroot/share/PlatformIO/scripts/lerdge.py
  1205. build_flags = ${common_stm32.build_flags}
  1206. -DSTM32F4 -DSTM32F4xx -DTARGET_STM32F4
  1207. -DDISABLE_GENERIC_SERIALUSB -DARDUINO_ARCH_STM32 -DARDUINO_LERDGE
  1208. -DTRANSFER_CLOCK_DIV=8 -DHAL_SRAM_MODULE_ENABLED
  1209. build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483
  1210. #
  1211. # Lerdge X
  1212. #
  1213. [env:LERDGEX]
  1214. extends = lerdge_common
  1215. board_build.firmware = Lerdge_X_firmware_force.bin
  1216. #
  1217. # Lerdge S
  1218. #
  1219. [env:LERDGES]
  1220. extends = lerdge_common
  1221. board_build.firmware = Lerdge_firmware_force.bin
  1222. #
  1223. # Lerdge K
  1224. #
  1225. [env:LERDGEK]
  1226. extends = lerdge_common
  1227. board_build.firmware = Lerdge_K_firmware_force.bin
  1228. build_flags = ${lerdge_common.build_flags}
  1229. -DLERDGEK
  1230. #
  1231. # RUMBA32
  1232. #
  1233. [env:rumba32]
  1234. platform = ${common_stm32.platform}
  1235. extends = common_stm32
  1236. build_flags = ${common_stm32.build_flags}
  1237. -Os
  1238. -DHAL_PCD_MODULE_ENABLED
  1239. -DDISABLE_GENERIC_SERIALUSB
  1240. -DHAL_UART_MODULE_ENABLED
  1241. -DTIMER_SERIAL=TIM9
  1242. board = rumba32_f446ve
  1243. upload_protocol = dfu
  1244. monitor_speed = 500000
  1245. #
  1246. # MKS Robin Nano V1.2 and V2 using hal STM32
  1247. #
  1248. [env:mks_robin_nano35_stm32]
  1249. platform = ${common_stm32.platform}
  1250. extends = common_stm32
  1251. build_flags = ${common_stm32.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4 -DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8
  1252. board = genericSTM32F103VE
  1253. board_build.core = stm32
  1254. board_build.variant = MARLIN_F103Vx
  1255. board_build.ldscript = ldscript.ld
  1256. board_build.offset = 0x7000
  1257. board_build.firmware = Robin_nano35.bin
  1258. board_upload.offset_address = 0x08007000
  1259. build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC
  1260. debug_tool = jlink
  1261. upload_protocol = jlink
  1262. extra_scripts = ${common.extra_scripts}
  1263. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1264. buildroot/share/PlatformIO/scripts/stm32_bootloader.py
  1265. buildroot/share/PlatformIO/scripts/mks_encrypt.py
  1266. #################################
  1267. # #
  1268. # Other Architectures #
  1269. # #
  1270. #################################
  1271. #
  1272. # Espressif ESP32
  1273. #
  1274. [env:esp32]
  1275. platform = espressif32@1.11.2
  1276. board = esp32dev
  1277. build_flags = ${common.build_flags} -DCORE_DEBUG_LEVEL=0
  1278. src_filter = ${common.default_src_filter} +<src/HAL/ESP32>
  1279. lib_ignore = NativeEthernet
  1280. upload_speed = 115200
  1281. #upload_port = marlinesp.local
  1282. #board_build.flash_mode = qio
  1283. [env:FYSETC_E4]
  1284. platform = espressif32@1.11.2
  1285. extends = env:esp32
  1286. board_build.partitions = default_16MB.csv
  1287. #
  1288. # Teensy 3.1 / 3.2 (ARM Cortex-M4)
  1289. #
  1290. [env:teensy31]
  1291. platform = teensy
  1292. board = teensy31
  1293. src_filter = ${common.default_src_filter} +<src/HAL/TEENSY31_32>
  1294. lib_ignore = NativeEthernet
  1295. #
  1296. # Teensy 3.5 / 3.6 (ARM Cortex-M4)
  1297. #
  1298. [env:teensy35]
  1299. platform = teensy
  1300. board = teensy35
  1301. src_filter = ${common.default_src_filter} +<src/HAL/TEENSY35_36>
  1302. lib_ignore = NativeEthernet
  1303. [env:teensy36]
  1304. platform = teensy
  1305. board = teensy36
  1306. src_filter = ${common.default_src_filter} +<src/HAL/TEENSY35_36>
  1307. lib_ignore = NativeEthernet
  1308. #
  1309. # Teensy 4.0 / 4.1 (ARM Cortex-M7)
  1310. #
  1311. [env:teensy41]
  1312. platform = teensy
  1313. board = teensy41
  1314. src_filter = ${common.default_src_filter} +<src/HAL/TEENSY40_41>
  1315. #
  1316. # Native
  1317. # No supported Arduino libraries, base Marlin only
  1318. #
  1319. [env:linux_native]
  1320. platform = native
  1321. framework =
  1322. build_flags = -D__PLAT_LINUX__ -std=gnu++17 -ggdb -g -lrt -lpthread -D__MARLIN_FIRMWARE__ -Wno-expansion-to-defined
  1323. src_build_flags = -Wall -IMarlin/src/HAL/LINUX/include
  1324. build_unflags = -Wall
  1325. lib_ldf_mode = off
  1326. lib_deps =
  1327. src_filter = ${common.default_src_filter} +<src/HAL/LINUX>
  1328. #
  1329. # Just print the dependency tree
  1330. #
  1331. [env:include_tree]
  1332. platform = atmelavr
  1333. board = megaatmega2560
  1334. build_flags = -c -H -std=gnu++11 -Wall -Os -D__MARLIN_FIRMWARE__
  1335. src_filter = +<src/MarlinCore.cpp>