123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
- #include "utility.h"
-
- #include "../MarlinCore.h"
- #include "../module/temperature.h"
-
- void safe_delay(millis_t ms) {
- while (ms > 50) {
- ms -= 50;
- delay(50);
- thermalManager.manage_heater();
- }
- delay(ms);
- thermalManager.manage_heater(); // This keeps us safe if too many small safe_delay() calls are made
- }
-
- // A delay to provide brittle hosts time to receive bytes
- #if ENABLED(SERIAL_OVERRUN_PROTECTION)
-
- #include "../gcode/gcode.h" // for set_autoreport_paused
-
- void serial_delay(const millis_t ms) {
- const bool was = gcode.set_autoreport_paused(true);
- safe_delay(ms);
- gcode.set_autoreport_paused(was);
- }
- #endif
-
- #if ENABLED(DEBUG_LEVELING_FEATURE)
-
- #include "../module/probe.h"
- #include "../module/motion.h"
- #include "../module/stepper.h"
- #include "../libs/numtostr.h"
- #include "../feature/bedlevel/bedlevel.h"
-
- void log_machine_info() {
- SERIAL_ECHOLNPGM("Machine Type: "
- TERN_(DELTA, "Delta")
- TERN_(IS_SCARA, "SCARA")
- TERN_(IS_CORE, "Core")
- TERN_(MARKFORGED_XY, "MarkForgedXY")
- TERN_(MARKFORGED_YX, "MarkForgedYX")
- TERN_(IS_CARTESIAN, "Cartesian")
- );
-
- SERIAL_ECHOLNPGM("Probe: "
- TERN_(PROBE_MANUALLY, "PROBE_MANUALLY")
- TERN_(NOZZLE_AS_PROBE, "NOZZLE_AS_PROBE")
- TERN_(FIX_MOUNTED_PROBE, "FIX_MOUNTED_PROBE")
- TERN_(HAS_Z_SERVO_PROBE, TERN(BLTOUCH, "BLTOUCH", "SERVO PROBE"))
- TERN_(TOUCH_MI_PROBE, "TOUCH_MI_PROBE")
- TERN_(Z_PROBE_SLED, "Z_PROBE_SLED")
- TERN_(Z_PROBE_ALLEN_KEY, "Z_PROBE_ALLEN_KEY")
- TERN_(SOLENOID_PROBE, "SOLENOID_PROBE")
- TERN_(MAGLEV4, "MAGLEV4")
- IF_DISABLED(PROBE_SELECTED, "NONE")
- );
-
- #if HAS_BED_PROBE
-
- #if !HAS_PROBE_XY_OFFSET
- SERIAL_ECHOPGM("Probe Offset X0 Y0 Z", probe.offset.z, " (");
- #else
- SERIAL_ECHOPGM_P(PSTR("Probe Offset X"), probe.offset_xy.x, SP_Y_STR, probe.offset_xy.y, SP_Z_STR, probe.offset.z);
- if (probe.offset_xy.x > 0)
- SERIAL_ECHOPGM(" (Right");
- else if (probe.offset_xy.x < 0)
- SERIAL_ECHOPGM(" (Left");
- else if (probe.offset_xy.y != 0)
- SERIAL_ECHOPGM(" (Middle");
- else
- SERIAL_ECHOPGM(" (Aligned With");
-
- if (probe.offset_xy.y > 0)
- SERIAL_ECHOF(F(TERN(IS_SCARA, "-Distal", "-Back")));
- else if (probe.offset_xy.y < 0)
- SERIAL_ECHOF(F(TERN(IS_SCARA, "-Proximal", "-Front")));
- else if (probe.offset_xy.x != 0)
- SERIAL_ECHOPGM("-Center");
-
- SERIAL_ECHOPGM(" & ");
-
- #endif
-
- SERIAL_ECHOF(probe.offset.z < 0 ? F("Below") : probe.offset.z > 0 ? F("Above") : F("Same Z as"));
- SERIAL_ECHOLNPGM(" Nozzle)");
-
- #endif
-
- #if HAS_ABL_OR_UBL
- SERIAL_ECHOPGM("Auto Bed Leveling: "
- TERN_(AUTO_BED_LEVELING_LINEAR, "LINEAR")
- TERN_(AUTO_BED_LEVELING_BILINEAR, "BILINEAR")
- TERN_(AUTO_BED_LEVELING_3POINT, "3POINT")
- TERN_(AUTO_BED_LEVELING_UBL, "UBL")
- );
-
- if (planner.leveling_active) {
- SERIAL_ECHOLNPGM(" (enabled)");
- #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
- if (planner.z_fade_height)
- SERIAL_ECHOLNPGM("Z Fade: ", planner.z_fade_height);
- #endif
- #if ABL_PLANAR
- SERIAL_ECHOPGM("ABL Adjustment");
- LOOP_NUM_AXES(a) {
- SERIAL_ECHOPGM_P((PGM_P)pgm_read_ptr(&SP_AXIS_STR[a]));
- serial_offset(planner.get_axis_position_mm(AxisEnum(a)) - current_position[a]);
- }
- #else
- #if ENABLED(AUTO_BED_LEVELING_UBL)
- SERIAL_ECHOPGM("UBL Adjustment Z");
- const float rz = ubl.get_z_correction(current_position);
- #elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
- SERIAL_ECHOPGM("ABL Adjustment Z");
- const float rz = bbl.get_z_correction(current_position);
- #endif
- SERIAL_ECHO(ftostr43sign(rz, '+'));
- #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
- if (planner.z_fade_height) {
- SERIAL_ECHOPGM(" (", ftostr43sign(rz * planner.fade_scaling_factor_for_z(current_position.z), '+'));
- SERIAL_CHAR(')');
- }
- #endif
- #endif
- }
- else
- SERIAL_ECHOLNPGM(" (disabled)");
-
- SERIAL_EOL();
-
- #elif ENABLED(MESH_BED_LEVELING)
-
- SERIAL_ECHOPGM("Mesh Bed Leveling");
- if (planner.leveling_active) {
- SERIAL_ECHOLNPGM(" (enabled)");
- SERIAL_ECHOPGM("MBL Adjustment Z", ftostr43sign(mbl.get_z(current_position), '+'));
- #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
- if (planner.z_fade_height) {
- SERIAL_ECHOPGM(" (", ftostr43sign(
- mbl.get_z(current_position, planner.fade_scaling_factor_for_z(current_position.z)), '+'
- ));
- SERIAL_CHAR(')');
- }
- #endif
- }
- else
- SERIAL_ECHOPGM(" (disabled)");
-
- SERIAL_EOL();
-
- #endif // MESH_BED_LEVELING
- }
-
- #endif // DEBUG_LEVELING_FEATURE
|