123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- #if HOTENDS > 2 || E_STEPPERS > 2
- #error "Creality3D RAMPS supports only 2 hotends / E-steppers. Comment out this line to continue."
- #endif
-
- #define BOARD_INFO_NAME "Creality3D RAMPS"
-
- //
- // Heaters / Fans
- //
- #define MOSFET_B_PIN 7 // For HEATER_1_PIN ("EEF" or "EEB")
- #define FAN_PIN 9
-
- #define FIL_RUNOUT_PIN 2
- #if NUM_RUNOUT_SENSORS >= 2
- #define FIL_RUNOUT2_PIN 15 // Creality CR-X can use dual runout sensors
- #endif
-
- #ifndef SD_DETECT_PIN
- #if SD_CONNECTION_IS(ONBOARD)
- //#define HAS_ONBOARD_SD_DETECT // If the SD_DETECT_PIN is wired up
- #endif
- #if ENABLED(HAS_ONBOARD_SD_DETECT) || !SD_CONNECTION_IS(ONBOARD)
- #define SD_DETECT_PIN 49
- #endif
- #endif
-
- #ifndef PS_ON_PIN
- #define PS_ON_PIN 40 // Used by CR2020 Industrial series
- #endif
-
- #if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN)
- #define CASE_LIGHT_PIN 65
- #endif
-
- #include "pins_RAMPS.h"
-
- #ifndef BEEPER_PIN
- #define BEEPER_PIN 37 // Always define beeper pin so Play Tone works with ExtUI
- #endif
-
- #define EXP1_PIN 65 // A11 - Used by CR2020 Industrial series for case
- #define EXP2_PIN 66 // A12
- #define EXP3_PIN 11 // SERVO0_PIN
- #define EXP4_PIN 12 // PS_ON_PIN
-
- #define SUICIDE_PIN 12 // Used by CR2020 Industrial series
- #ifndef SUICIDE_PIN_STATE
- #define SUICIDE_PIN_STATE HIGH
- #endif
|