123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Arduino Mega with RAMPS-S v1.2 by Sakul.cz pin assignments
- * Written by Michal Rábek <rabek33@gmail.com>
- *
- * Applies to the following boards:
- *
- * BOARD_RAMPS_S_12_EEFB Ramps S 1.2 (Hotend0, Hotend1, Fan, Bed)
- * BOARD_RAMPS_S_12_EEEB Ramps S 1.2 (Hotend0, Hotend1, Hotend2, Bed)
- * BOARD_RAMPS_S_12_EFFB Ramps S 1.2 (Hotend, Fan0, Fan1, Bed)
- *
- * Other pins_MYBOARD.h files may override these defaults
- */
-
- #include "env_validate.h"
-
- // Custom flags and defines for the build
- //#define BOARD_CUSTOM_BUILD_FLAGS -D__FOO__
-
- #ifndef BOARD_INFO_NAME
- #define BOARD_INFO_NAME "RAMPS S 1.2"
- #endif
-
- //
- // Servos
- //
- #ifndef SERVO0_PIN
- #define SERVO0_PIN 10
- #endif
- #ifndef SERVO1_PIN
- #define SERVO1_PIN 11
- #endif
- #ifndef SERVO2_PIN
- #define SERVO2_PIN 12
- #endif
- #ifndef SERVO3_PIN
- #define SERVO3_PIN 44
- #endif
-
- //
- // Limit Switches
- //
- #ifndef X_STOP_PIN
- #ifndef X_MIN_PIN
- #define X_MIN_PIN 37
- #endif
- #ifndef X_MAX_PIN
- #define X_MAX_PIN 36
- #endif
- #endif
- #ifndef Y_STOP_PIN
- #ifndef Y_MIN_PIN
- #define Y_MIN_PIN 35
- #endif
- #ifndef Y_MAX_PIN
- #define Y_MAX_PIN 34
- #endif
- #endif
- #ifndef Z_STOP_PIN
- #ifndef Z_MIN_PIN
- #define Z_MIN_PIN 33
- #endif
- #ifndef Z_MAX_PIN
- #define Z_MAX_PIN 32
- #endif
- #endif
-
- //
- // Z Probe (when not Z_MIN_PIN)
- //
- #ifndef Z_MIN_PROBE_PIN
- #define Z_MIN_PROBE_PIN 5
- #endif
-
- //
- // Filament Runout Sensor
- //
- #ifndef FIL_RUNOUT_PIN
- #define FIL_RUNOUT_PIN 44 // RAMPS_S S3 on the servos connector
- #endif
-
- //
- // Steppers
- //
- #define X_STEP_PIN 17
- #define X_DIR_PIN 16
- #define X_ENABLE_PIN 48
-
- #define Y_STEP_PIN 54
- #define Y_DIR_PIN 47
- #define Y_ENABLE_PIN 55
-
- #ifndef Z_STEP_PIN
- #define Z_STEP_PIN 57
- #endif
- #define Z_DIR_PIN 56
- #define Z_ENABLE_PIN 62
-
- #define E0_STEP_PIN 23
- #define E0_DIR_PIN 22
- #define E0_ENABLE_PIN 24
-
- #define E1_STEP_PIN 26
- #define E1_DIR_PIN 25
- #define E1_ENABLE_PIN 27
-
- #define E2_STEP_PIN 29
- #define E2_DIR_PIN 28
- #define E2_ENABLE_PIN 39
-
- //
- // Temperature Sensors
- //
- #ifndef TEMP_0_PIN
- #define TEMP_0_PIN 15 // Analog Input
- #endif
- #ifndef TEMP_1_PIN
- #define TEMP_1_PIN 14 // Analog Input
- #endif
- #ifndef TEMP_2_PIN
- #define TEMP_2_PIN 13 // Analog Input
- #endif
- #ifndef TEMP_3_PIN
- #define TEMP_3_PIN 12 // Analog Input
- #endif
- #ifndef TEMP_BED_PIN
- #define TEMP_BED_PIN 11 // Analog Input
- #endif
-
- //
- // Heaters / Fans
- //
- #ifndef MOSFET_D_PIN
- #define MOSFET_D_PIN -1
- #endif
- #ifndef RAMPS_S_HE_0
- #define RAMPS_S_HE_0 2
- #endif
- #ifndef RAMPS_S_HE_1
- #define RAMPS_S_HE_1 3
- #endif
- #ifndef RAMPS_S_HE_2
- #define RAMPS_S_HE_2 6
- #endif
-
- #define HEATER_BED_PIN 9
-
- #define HEATER_0_PIN RAMPS_S_HE_0
-
- #if MB(RAMPS_S_12_EEFB) // Hotend0, Hotend1, Fan, Bed
- #define HEATER_1_PIN RAMPS_S_HE_1
- #define FAN_PIN RAMPS_S_HE_2
- #elif MB(RAMPS_S_12_EEEB) // Hotend0, Hotend1, Hotend2, Bed
- #define HEATER_1_PIN RAMPS_S_HE_1
- #define HEATER_2_PIN RAMPS_S_HE_2
- #elif MB(RAMPS_S_12_EFFB) // Hotend, Fan0, Fan1, Bed
- #define FAN_PIN RAMPS_S_HE_1
- #define FAN1_PIN RAMPS_S_HE_2
- #endif
-
- //
- // Misc. Functions
- //
- #define SDSS 53
- #define LED_PIN 13
-
- #ifndef KILL_PIN
- #define KILL_PIN 46
- #endif
-
- #ifndef FILWIDTH_PIN
- #define FILWIDTH_PIN 60 // Analog Input on EXTEND
- #endif
-
- #ifndef PS_ON_PIN
- #define PS_ON_PIN 12 // RAMPS_S S2 on the servos connector
- #endif
-
- #if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
- #if NUM_SERVOS <= 1 // Prefer the servo connector
- #define CASE_LIGHT_PIN 12 // Hardware PWM (RAMPS_S S1 on the servos connector)
- #elif HAS_FREE_AUX2_PINS
- #define CASE_LIGHT_PIN 44 // Hardware PWM
- #endif
- #endif
-
- //
- // M3/M4/M5 - Spindle/Laser Control
- //
- #if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN)
- #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown!
- #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
- #define SPINDLE_DIR_PIN 5
- #endif
-
- //
- // TMC software SPI
- //
- #if ENABLED(TMC_USE_SW_SPI)
- #ifndef TMC_SW_MOSI
- #define TMC_SW_MOSI 51
- #endif
- #ifndef TMC_SW_MISO
- #define TMC_SW_MISO 50
- #endif
- #ifndef TMC_SW_SCK
- #define TMC_SW_SCK 53
- #endif
- #endif
-
- //
- // Průša i3 MK2 Multiplexer Support
- //
- #if HAS_PRUSA_MMU1
- #ifndef E_MUX0_PIN
- #define E_MUX0_PIN 29 // E2_STEP_PIN
- #endif
- #ifndef E_MUX1_PIN
- #define E_MUX1_PIN 28 // E2_DIR_PIN
- #endif
- #ifndef E_MUX2_PIN
- #define E_MUX2_PIN 39 // E2_ENABLE_PIN
- #endif
- #endif
-
- //////////////////////////
- // LCDs and Controllers //
- //////////////////////////
-
- //
- // LCD Display output pins
- //
- #if HAS_WIRED_LCD
- #define BEEPER_PIN 45
- #define LCD_PINS_RS 19
- #define LCD_PINS_ENABLE 49
- #define LCD_PINS_D4 18
- #define LCD_PINS_D5 30
- #define LCD_PINS_D6 41
- #define LCD_PINS_D7 31
- #ifndef SD_DETECT_PIN
- #define SD_DETECT_PIN 38
- #endif
-
- #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
- #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
- #endif
-
- #endif
-
- //
- // LCD Display input pins
- //
- #if IS_NEWPANEL
- #define BTN_EN1 40
- #define BTN_EN2 42
- #define BTN_ENC 43
- #endif
|