My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Du kan inte välja fler än 25 ämnen Ämnen måste starta med en bokstav eller siffra, kan innehålla bindestreck ('-') och vara max 35 tecken långa.

Marlin_main.cpp 280KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202520262027202820292030203120322033203420352036203720382039204020412042204320442045204620472048204920502051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087208820892090209120922093209420952096209720982099210021012102210321042105210621072108210921102111211221132114211521162117211821192120212121222123212421252126212721282129213021312132213321342135213621372138213921402141214221432144214521462147214821492150215121522153215421552156215721582159216021612162216321642165216621672168216921702171217221732174217521762177217821792180218121822183218421852186218721882189219021912192219321942195219621972198219922002201220222032204220522062207220822092210221122122213221422152216221722182219222022212222222322242225222622272228222922302231223222332234223522362237223822392240224122422243224422452246224722482249225022512252225322542255225622572258225922602261226222632264226522662267226822692270227122722273227422752276227722782279228022812282228322842285228622872288228922902291229222932294229522962297229822992300230123022303230423052306230723082309231023112312231323142315231623172318231923202321232223232324232523262327232823292330233123322333233423352336233723382339234023412342234323442345234623472348234923502351235223532354235523562357235823592360236123622363236423652366236723682369237023712372237323742375237623772378237923802381238223832384238523862387238823892390239123922393239423952396239723982399240024012402240324042405240624072408240924102411241224132414241524162417241824192420242124222423242424252426242724282429243024312432243324342435243624372438243924402441244224432444244524462447244824492450245124522453245424552456245724582459246024612462246324642465246624672468246924702471247224732474247524762477247824792480248124822483248424852486248724882489249024912492249324942495249624972498249925002501250225032504250525062507250825092510251125122513251425152516251725182519252025212522252325242525252625272528252925302531253225332534253525362537253825392540254125422543254425452546254725482549255025512552255325542555255625572558255925602561256225632564256525662567256825692570257125722573257425752576257725782579258025812582258325842585258625872588258925902591259225932594259525962597259825992600260126022603260426052606260726082609261026112612261326142615261626172618261926202621262226232624262526262627262826292630263126322633263426352636263726382639264026412642264326442645264626472648264926502651265226532654265526562657265826592660266126622663266426652666266726682669267026712672267326742675267626772678267926802681268226832684268526862687268826892690269126922693269426952696269726982699270027012702270327042705270627072708270927102711271227132714271527162717271827192720272127222723272427252726272727282729273027312732273327342735273627372738273927402741274227432744274527462747274827492750275127522753275427552756275727582759276027612762276327642765276627672768276927702771277227732774277527762777277827792780278127822783278427852786278727882789279027912792279327942795279627972798279928002801280228032804280528062807280828092810281128122813281428152816281728182819282028212822282328242825282628272828282928302831283228332834283528362837283828392840284128422843284428452846284728482849285028512852285328542855285628572858285928602861286228632864286528662867286828692870287128722873287428752876287728782879288028812882288328842885288628872888288928902891289228932894289528962897289828992900290129022903290429052906290729082909291029112912291329142915291629172918291929202921292229232924292529262927292829292930293129322933293429352936293729382939294029412942294329442945294629472948294929502951295229532954295529562957295829592960296129622963296429652966296729682969297029712972297329742975297629772978297929802981298229832984298529862987298829892990299129922993299429952996299729982999300030013002300330043005300630073008300930103011301230133014301530163017301830193020302130223023302430253026302730283029303030313032303330343035303630373038303930403041304230433044304530463047304830493050305130523053305430553056305730583059306030613062306330643065306630673068306930703071307230733074307530763077307830793080308130823083308430853086308730883089309030913092309330943095309630973098309931003101310231033104310531063107310831093110311131123113311431153116311731183119312031213122312331243125312631273128312931303131313231333134313531363137313831393140314131423143314431453146314731483149315031513152315331543155315631573158315931603161316231633164316531663167316831693170317131723173317431753176317731783179318031813182318331843185318631873188318931903191319231933194319531963197319831993200320132023203320432053206320732083209321032113212321332143215321632173218321932203221322232233224322532263227322832293230323132323233323432353236323732383239324032413242324332443245324632473248324932503251325232533254325532563257325832593260326132623263326432653266326732683269327032713272327332743275327632773278327932803281328232833284328532863287328832893290329132923293329432953296329732983299330033013302330333043305330633073308330933103311331233133314331533163317331833193320332133223323332433253326332733283329333033313332333333343335333633373338333933403341334233433344334533463347334833493350335133523353335433553356335733583359336033613362336333643365336633673368336933703371337233733374337533763377337833793380338133823383338433853386338733883389339033913392339333943395339633973398339934003401340234033404340534063407340834093410341134123413341434153416341734183419342034213422342334243425342634273428342934303431343234333434343534363437343834393440344134423443344434453446344734483449345034513452345334543455345634573458345934603461346234633464346534663467346834693470347134723473347434753476347734783479348034813482348334843485348634873488348934903491349234933494349534963497349834993500350135023503350435053506350735083509351035113512351335143515351635173518351935203521352235233524352535263527352835293530353135323533353435353536353735383539354035413542354335443545354635473548354935503551355235533554355535563557355835593560356135623563356435653566356735683569357035713572357335743575357635773578357935803581358235833584358535863587358835893590359135923593359435953596359735983599360036013602360336043605360636073608360936103611361236133614361536163617361836193620362136223623362436253626362736283629363036313632363336343635363636373638363936403641364236433644364536463647364836493650365136523653365436553656365736583659366036613662366336643665366636673668366936703671367236733674367536763677367836793680368136823683368436853686368736883689369036913692369336943695369636973698369937003701370237033704370537063707370837093710371137123713371437153716371737183719372037213722372337243725372637273728372937303731373237333734373537363737373837393740374137423743374437453746374737483749375037513752375337543755375637573758375937603761376237633764376537663767376837693770377137723773377437753776377737783779378037813782378337843785378637873788378937903791379237933794379537963797379837993800380138023803380438053806380738083809381038113812381338143815381638173818381938203821382238233824382538263827382838293830383138323833383438353836383738383839384038413842384338443845384638473848384938503851385238533854385538563857385838593860386138623863386438653866386738683869387038713872387338743875387638773878387938803881388238833884388538863887388838893890389138923893389438953896389738983899390039013902390339043905390639073908390939103911391239133914391539163917391839193920392139223923392439253926392739283929393039313932393339343935393639373938393939403941394239433944394539463947394839493950395139523953395439553956395739583959396039613962396339643965396639673968396939703971397239733974397539763977397839793980398139823983398439853986398739883989399039913992399339943995399639973998399940004001400240034004400540064007400840094010401140124013401440154016401740184019402040214022402340244025402640274028402940304031403240334034403540364037403840394040404140424043404440454046404740484049405040514052405340544055405640574058405940604061406240634064406540664067406840694070407140724073407440754076407740784079408040814082408340844085408640874088408940904091409240934094409540964097409840994100410141024103410441054106410741084109411041114112411341144115411641174118411941204121412241234124412541264127412841294130413141324133413441354136413741384139414041414142414341444145414641474148414941504151415241534154415541564157415841594160416141624163416441654166416741684169417041714172417341744175417641774178417941804181418241834184418541864187418841894190419141924193419441954196419741984199420042014202420342044205420642074208420942104211421242134214421542164217421842194220422142224223422442254226422742284229423042314232423342344235423642374238423942404241424242434244424542464247424842494250425142524253425442554256425742584259426042614262426342644265426642674268426942704271427242734274427542764277427842794280428142824283428442854286428742884289429042914292429342944295429642974298429943004301430243034304430543064307430843094310431143124313431443154316431743184319432043214322432343244325432643274328432943304331433243334334433543364337433843394340434143424343434443454346434743484349435043514352435343544355435643574358435943604361436243634364436543664367436843694370437143724373437443754376437743784379438043814382438343844385438643874388438943904391439243934394439543964397439843994400440144024403440444054406440744084409441044114412441344144415441644174418441944204421442244234424442544264427442844294430443144324433443444354436443744384439444044414442444344444445444644474448444944504451445244534454445544564457445844594460446144624463446444654466446744684469447044714472447344744475447644774478447944804481448244834484448544864487448844894490449144924493449444954496449744984499450045014502450345044505450645074508450945104511451245134514451545164517451845194520452145224523452445254526452745284529453045314532453345344535453645374538453945404541454245434544454545464547454845494550455145524553455445554556455745584559456045614562456345644565456645674568456945704571457245734574457545764577457845794580458145824583458445854586458745884589459045914592459345944595459645974598459946004601460246034604460546064607460846094610461146124613461446154616461746184619462046214622462346244625462646274628462946304631463246334634463546364637463846394640464146424643464446454646464746484649465046514652465346544655465646574658465946604661466246634664466546664667466846694670467146724673467446754676467746784679468046814682468346844685468646874688468946904691469246934694469546964697469846994700470147024703470447054706470747084709471047114712471347144715471647174718471947204721472247234724472547264727472847294730473147324733473447354736473747384739474047414742474347444745474647474748474947504751475247534754475547564757475847594760476147624763476447654766476747684769477047714772477347744775477647774778477947804781478247834784478547864787478847894790479147924793479447954796479747984799480048014802480348044805480648074808480948104811481248134814481548164817481848194820482148224823482448254826482748284829483048314832483348344835483648374838483948404841484248434844484548464847484848494850485148524853485448554856485748584859486048614862486348644865486648674868486948704871487248734874487548764877487848794880488148824883488448854886488748884889489048914892489348944895489648974898489949004901490249034904490549064907490849094910491149124913491449154916491749184919492049214922492349244925492649274928492949304931493249334934493549364937493849394940494149424943494449454946494749484949495049514952495349544955495649574958495949604961496249634964496549664967496849694970497149724973497449754976497749784979498049814982498349844985498649874988498949904991499249934994499549964997499849995000500150025003500450055006500750085009501050115012501350145015501650175018501950205021502250235024502550265027502850295030503150325033503450355036503750385039504050415042504350445045504650475048504950505051505250535054505550565057505850595060506150625063506450655066506750685069507050715072507350745075507650775078507950805081508250835084508550865087508850895090509150925093509450955096509750985099510051015102510351045105510651075108510951105111511251135114511551165117511851195120512151225123512451255126512751285129513051315132513351345135513651375138513951405141514251435144514551465147514851495150515151525153515451555156515751585159516051615162516351645165516651675168516951705171517251735174517551765177517851795180518151825183518451855186518751885189519051915192519351945195519651975198519952005201520252035204520552065207520852095210521152125213521452155216521752185219522052215222522352245225522652275228522952305231523252335234523552365237523852395240524152425243524452455246524752485249525052515252525352545255525652575258525952605261526252635264526552665267526852695270527152725273527452755276527752785279528052815282528352845285528652875288528952905291529252935294529552965297529852995300530153025303530453055306530753085309531053115312531353145315531653175318531953205321532253235324532553265327532853295330533153325333533453355336533753385339534053415342534353445345534653475348534953505351535253535354535553565357535853595360536153625363536453655366536753685369537053715372537353745375537653775378537953805381538253835384538553865387538853895390539153925393539453955396539753985399540054015402540354045405540654075408540954105411541254135414541554165417541854195420542154225423542454255426542754285429543054315432543354345435543654375438543954405441544254435444544554465447544854495450545154525453545454555456545754585459546054615462546354645465546654675468546954705471547254735474547554765477547854795480548154825483548454855486548754885489549054915492549354945495549654975498549955005501550255035504550555065507550855095510551155125513551455155516551755185519552055215522552355245525552655275528552955305531553255335534553555365537553855395540554155425543554455455546554755485549555055515552555355545555555655575558555955605561556255635564556555665567556855695570557155725573557455755576557755785579558055815582558355845585558655875588558955905591559255935594559555965597559855995600560156025603560456055606560756085609561056115612561356145615561656175618561956205621562256235624562556265627562856295630563156325633563456355636563756385639564056415642564356445645564656475648564956505651565256535654565556565657565856595660566156625663566456655666566756685669567056715672567356745675567656775678567956805681568256835684568556865687568856895690569156925693569456955696569756985699570057015702570357045705570657075708570957105711571257135714571557165717571857195720572157225723572457255726572757285729573057315732573357345735573657375738573957405741574257435744574557465747574857495750575157525753575457555756575757585759576057615762576357645765576657675768576957705771577257735774577557765777577857795780578157825783578457855786578757885789579057915792579357945795579657975798579958005801580258035804580558065807580858095810581158125813581458155816581758185819582058215822582358245825582658275828582958305831583258335834583558365837583858395840584158425843584458455846584758485849585058515852585358545855585658575858585958605861586258635864586558665867586858695870587158725873587458755876587758785879588058815882588358845885588658875888588958905891589258935894589558965897589858995900590159025903590459055906590759085909591059115912591359145915591659175918591959205921592259235924592559265927592859295930593159325933593459355936593759385939594059415942594359445945594659475948594959505951595259535954595559565957595859595960596159625963596459655966596759685969597059715972597359745975597659775978597959805981598259835984598559865987598859895990599159925993599459955996599759985999600060016002600360046005600660076008600960106011601260136014601560166017601860196020602160226023602460256026602760286029603060316032603360346035603660376038603960406041604260436044604560466047604860496050605160526053605460556056605760586059606060616062606360646065606660676068606960706071607260736074607560766077607860796080608160826083608460856086608760886089609060916092609360946095609660976098609961006101610261036104610561066107610861096110611161126113611461156116611761186119612061216122612361246125612661276128612961306131613261336134613561366137613861396140614161426143614461456146614761486149615061516152615361546155615661576158615961606161616261636164616561666167616861696170617161726173617461756176617761786179618061816182618361846185618661876188618961906191619261936194619561966197619861996200620162026203620462056206620762086209621062116212621362146215621662176218621962206221622262236224622562266227622862296230623162326233623462356236623762386239624062416242624362446245624662476248624962506251625262536254625562566257625862596260626162626263626462656266626762686269627062716272627362746275627662776278627962806281628262836284628562866287628862896290629162926293629462956296629762986299630063016302630363046305630663076308630963106311631263136314631563166317631863196320632163226323632463256326632763286329633063316332633363346335633663376338633963406341634263436344634563466347634863496350635163526353635463556356635763586359636063616362636363646365636663676368636963706371637263736374637563766377637863796380638163826383638463856386638763886389639063916392639363946395639663976398639964006401640264036404640564066407640864096410641164126413641464156416641764186419642064216422642364246425642664276428642964306431643264336434643564366437643864396440644164426443644464456446644764486449645064516452645364546455645664576458645964606461646264636464646564666467646864696470647164726473647464756476647764786479648064816482648364846485648664876488648964906491649264936494649564966497649864996500650165026503650465056506650765086509651065116512651365146515651665176518651965206521652265236524652565266527652865296530653165326533653465356536653765386539654065416542654365446545654665476548654965506551655265536554655565566557655865596560656165626563656465656566656765686569657065716572657365746575657665776578657965806581658265836584658565866587658865896590659165926593659465956596659765986599660066016602660366046605660666076608660966106611661266136614661566166617661866196620662166226623662466256626662766286629663066316632663366346635663666376638663966406641664266436644664566466647664866496650665166526653665466556656665766586659666066616662666366646665666666676668666966706671667266736674667566766677667866796680668166826683668466856686668766886689669066916692669366946695669666976698669967006701670267036704670567066707670867096710671167126713671467156716671767186719672067216722672367246725672667276728672967306731673267336734673567366737673867396740674167426743674467456746674767486749675067516752675367546755675667576758675967606761676267636764676567666767676867696770677167726773677467756776677767786779678067816782678367846785678667876788678967906791679267936794679567966797679867996800680168026803680468056806680768086809681068116812681368146815681668176818681968206821682268236824682568266827682868296830683168326833683468356836683768386839684068416842684368446845684668476848684968506851685268536854685568566857685868596860686168626863686468656866686768686869687068716872687368746875687668776878687968806881688268836884688568866887688868896890689168926893689468956896689768986899690069016902690369046905690669076908690969106911691269136914691569166917691869196920692169226923692469256926692769286929693069316932693369346935693669376938693969406941694269436944694569466947694869496950695169526953695469556956695769586959696069616962696369646965696669676968696969706971697269736974697569766977697869796980698169826983698469856986698769886989699069916992699369946995699669976998699970007001700270037004700570067007700870097010701170127013701470157016701770187019702070217022702370247025702670277028702970307031703270337034703570367037703870397040704170427043704470457046704770487049705070517052705370547055705670577058705970607061706270637064706570667067706870697070707170727073707470757076707770787079708070817082708370847085708670877088708970907091709270937094709570967097709870997100710171027103710471057106710771087109711071117112711371147115711671177118711971207121712271237124712571267127712871297130713171327133713471357136713771387139714071417142714371447145714671477148714971507151715271537154715571567157715871597160716171627163716471657166716771687169717071717172717371747175717671777178717971807181718271837184718571867187718871897190719171927193719471957196719771987199720072017202720372047205720672077208720972107211721272137214721572167217721872197220722172227223722472257226722772287229723072317232723372347235723672377238723972407241724272437244724572467247724872497250725172527253725472557256725772587259726072617262726372647265726672677268726972707271727272737274727572767277727872797280728172827283728472857286728772887289729072917292729372947295729672977298729973007301730273037304730573067307730873097310731173127313731473157316731773187319732073217322732373247325732673277328732973307331733273337334733573367337733873397340734173427343734473457346734773487349735073517352735373547355735673577358735973607361736273637364736573667367736873697370737173727373737473757376737773787379738073817382738373847385738673877388738973907391739273937394739573967397739873997400740174027403740474057406740774087409741074117412741374147415741674177418741974207421742274237424742574267427742874297430743174327433743474357436743774387439744074417442744374447445744674477448744974507451745274537454745574567457745874597460746174627463746474657466746774687469747074717472747374747475747674777478747974807481748274837484748574867487748874897490749174927493749474957496749774987499750075017502750375047505750675077508750975107511751275137514751575167517751875197520752175227523752475257526752775287529753075317532753375347535753675377538753975407541754275437544754575467547754875497550755175527553755475557556755775587559756075617562756375647565756675677568756975707571757275737574757575767577757875797580758175827583758475857586758775887589759075917592759375947595759675977598759976007601760276037604760576067607760876097610761176127613761476157616761776187619762076217622762376247625762676277628762976307631763276337634763576367637763876397640764176427643764476457646764776487649765076517652765376547655765676577658765976607661766276637664766576667667766876697670767176727673767476757676767776787679768076817682768376847685768676877688768976907691769276937694769576967697769876997700770177027703770477057706770777087709771077117712771377147715771677177718771977207721772277237724772577267727772877297730773177327733773477357736773777387739774077417742774377447745774677477748774977507751775277537754775577567757775877597760776177627763776477657766776777687769777077717772777377747775777677777778777977807781778277837784778577867787778877897790779177927793779477957796779777987799780078017802780378047805780678077808780978107811781278137814781578167817781878197820782178227823782478257826782778287829783078317832783378347835783678377838783978407841784278437844784578467847784878497850785178527853785478557856785778587859786078617862786378647865786678677868786978707871787278737874787578767877787878797880788178827883788478857886788778887889789078917892789378947895789678977898789979007901790279037904790579067907790879097910791179127913791479157916791779187919792079217922792379247925792679277928792979307931793279337934793579367937793879397940794179427943794479457946794779487949795079517952795379547955795679577958795979607961796279637964796579667967796879697970797179727973797479757976797779787979798079817982798379847985798679877988798979907991799279937994799579967997799879998000800180028003800480058006800780088009801080118012801380148015801680178018801980208021802280238024802580268027802880298030803180328033803480358036803780388039804080418042804380448045804680478048804980508051805280538054805580568057805880598060806180628063806480658066806780688069807080718072807380748075807680778078807980808081808280838084808580868087808880898090809180928093809480958096809780988099810081018102810381048105810681078108810981108111811281138114811581168117811881198120812181228123812481258126812781288129813081318132813381348135813681378138813981408141814281438144814581468147814881498150815181528153815481558156815781588159816081618162816381648165816681678168816981708171817281738174817581768177817881798180818181828183818481858186818781888189819081918192819381948195819681978198819982008201820282038204820582068207820882098210821182128213821482158216821782188219822082218222822382248225822682278228822982308231823282338234823582368237823882398240824182428243824482458246824782488249825082518252825382548255825682578258825982608261826282638264826582668267826882698270827182728273827482758276827782788279828082818282828382848285828682878288828982908291829282938294829582968297829882998300830183028303830483058306830783088309831083118312831383148315831683178318831983208321832283238324832583268327832883298330833183328333833483358336833783388339834083418342834383448345834683478348834983508351835283538354835583568357835883598360836183628363836483658366836783688369837083718372837383748375837683778378837983808381838283838384838583868387838883898390839183928393839483958396839783988399840084018402840384048405840684078408840984108411841284138414841584168417841884198420842184228423842484258426842784288429843084318432843384348435843684378438843984408441844284438444844584468447844884498450845184528453845484558456845784588459846084618462846384648465846684678468846984708471847284738474847584768477847884798480848184828483848484858486848784888489849084918492849384948495849684978498849985008501850285038504850585068507850885098510851185128513851485158516851785188519852085218522852385248525852685278528852985308531853285338534853585368537853885398540854185428543854485458546854785488549855085518552855385548555855685578558855985608561856285638564856585668567856885698570857185728573857485758576857785788579858085818582858385848585858685878588858985908591859285938594859585968597859885998600860186028603860486058606860786088609861086118612861386148615861686178618861986208621862286238624862586268627862886298630863186328633863486358636863786388639864086418642864386448645864686478648864986508651865286538654865586568657865886598660866186628663866486658666866786688669867086718672867386748675867686778678867986808681868286838684868586868687868886898690869186928693869486958696869786988699870087018702870387048705870687078708870987108711871287138714871587168717871887198720872187228723872487258726872787288729873087318732873387348735873687378738873987408741874287438744874587468747874887498750875187528753875487558756875787588759876087618762876387648765876687678768876987708771877287738774877587768777877887798780878187828783878487858786878787888789879087918792879387948795879687978798879988008801880288038804880588068807880888098810881188128813881488158816881788188819882088218822882388248825882688278828882988308831883288338834883588368837883888398840884188428843884488458846884788488849885088518852885388548855885688578858885988608861886288638864886588668867886888698870887188728873887488758876887788788879888088818882888388848885888688878888888988908891889288938894
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. *
  24. * About Marlin
  25. *
  26. * This firmware is a mashup between Sprinter and grbl.
  27. * - https://github.com/kliment/Sprinter
  28. * - https://github.com/simen/grbl/tree
  29. *
  30. * It has preliminary support for Matthew Roberts advance algorithm
  31. * - http://reprap.org/pipermail/reprap-dev/2011-May/003323.html
  32. */
  33. #include "Marlin.h"
  34. #if ENABLED(AUTO_BED_LEVELING_FEATURE)
  35. #include "vector_3.h"
  36. #if ENABLED(AUTO_BED_LEVELING_GRID)
  37. #include "qr_solve.h"
  38. #endif
  39. #endif // AUTO_BED_LEVELING_FEATURE
  40. #if ENABLED(MESH_BED_LEVELING)
  41. #include "mesh_bed_leveling.h"
  42. #endif
  43. #if ENABLED(BEZIER_CURVE_SUPPORT)
  44. #include "planner_bezier.h"
  45. #endif
  46. #include "ultralcd.h"
  47. #include "planner.h"
  48. #include "stepper.h"
  49. #include "endstops.h"
  50. #include "temperature.h"
  51. #include "cardreader.h"
  52. #include "configuration_store.h"
  53. #include "language.h"
  54. #include "pins_arduino.h"
  55. #include "math.h"
  56. #include "nozzle.h"
  57. #include "duration_t.h"
  58. #include "types.h"
  59. #if ENABLED(USE_WATCHDOG)
  60. #include "watchdog.h"
  61. #endif
  62. #if ENABLED(BLINKM)
  63. #include "blinkm.h"
  64. #include "Wire.h"
  65. #endif
  66. #if HAS_SERVOS
  67. #include "servo.h"
  68. #endif
  69. #if HAS_DIGIPOTSS
  70. #include <SPI.h>
  71. #endif
  72. #if ENABLED(DAC_STEPPER_CURRENT)
  73. #include "stepper_dac.h"
  74. #endif
  75. #if ENABLED(EXPERIMENTAL_I2CBUS)
  76. #include "twibus.h"
  77. #endif
  78. /**
  79. * Look here for descriptions of G-codes:
  80. * - http://linuxcnc.org/handbook/gcode/g-code.html
  81. * - http://objects.reprap.org/wiki/Mendel_User_Manual:_RepRapGCodes
  82. *
  83. * Help us document these G-codes online:
  84. * - https://github.com/MarlinFirmware/Marlin/wiki/G-Code-in-Marlin
  85. * - http://reprap.org/wiki/G-code
  86. *
  87. * -----------------
  88. * Implemented Codes
  89. * -----------------
  90. *
  91. * "G" Codes
  92. *
  93. * G0 -> G1
  94. * G1 - Coordinated Movement X Y Z E
  95. * G2 - CW ARC
  96. * G3 - CCW ARC
  97. * G4 - Dwell S<seconds> or P<milliseconds>
  98. * G5 - Cubic B-spline with XYZE destination and IJPQ offsets
  99. * G10 - Retract filament according to settings of M207
  100. * G11 - Retract recover filament according to settings of M208
  101. * G12 - Clean tool
  102. * G20 - Set input units to inches
  103. * G21 - Set input units to millimeters
  104. * G28 - Home one or more axes
  105. * G29 - Detailed Z probe, probes the bed at 3 or more points. Will fail if you haven't homed yet.
  106. * G30 - Single Z probe, probes bed at current XY location.
  107. * G31 - Dock sled (Z_PROBE_SLED only)
  108. * G32 - Undock sled (Z_PROBE_SLED only)
  109. * G90 - Use Absolute Coordinates
  110. * G91 - Use Relative Coordinates
  111. * G92 - Set current position to coordinates given
  112. *
  113. * "M" Codes
  114. *
  115. * M0 - Unconditional stop - Wait for user to press a button on the LCD (Only if ULTRA_LCD is enabled)
  116. * M1 - Same as M0
  117. * M17 - Enable/Power all stepper motors
  118. * M18 - Disable all stepper motors; same as M84
  119. * M20 - List SD card
  120. * M21 - Init SD card
  121. * M22 - Release SD card
  122. * M23 - Select SD file (M23 filename.g)
  123. * M24 - Start/resume SD print
  124. * M25 - Pause SD print
  125. * M26 - Set SD position in bytes (M26 S12345)
  126. * M27 - Report SD print status
  127. * M28 - Start SD write (M28 filename.g)
  128. * M29 - Stop SD write
  129. * M30 - Delete file from SD (M30 filename.g)
  130. * M31 - Output time since last M109 or SD card start to serial
  131. * M32 - Select file and start SD print (Can be used _while_ printing from SD card files):
  132. * syntax "M32 /path/filename#", or "M32 S<startpos bytes> !filename#"
  133. * Call gcode file : "M32 P !filename#" and return to caller file after finishing (similar to #include).
  134. * The '#' is necessary when calling from within sd files, as it stops buffer prereading
  135. * M33 - Get the longname version of a path
  136. * M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used.
  137. * M48 - Measure Z_Probe repeatability. M48 [P # of points] [X position] [Y position] [V_erboseness #] [E_ngage Probe] [L # of legs of travel]
  138. * M75 - Start the print job timer
  139. * M76 - Pause the print job timer
  140. * M77 - Stop the print job timer
  141. * M78 - Show statistical information about the print jobs
  142. * M80 - Turn on Power Supply
  143. * M81 - Turn off Power Supply
  144. * M82 - Set E codes absolute (default)
  145. * M83 - Set E codes relative while in Absolute Coordinates (G90) mode
  146. * M84 - Disable steppers until next move,
  147. * or use S<seconds> to specify an inactivity timeout, after which the steppers will be disabled. S0 to disable the timeout.
  148. * M85 - Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default)
  149. * M92 - Set planner.axis_steps_per_mm - same syntax as G92
  150. * M104 - Set extruder target temp
  151. * M105 - Read current temp
  152. * M106 - Fan on
  153. * M107 - Fan off
  154. * M108 - Stop the waiting for heaters in M109, M190, M303. Does not affect the target temperature.
  155. * M109 - Sxxx Wait for extruder current temp to reach target temp. Waits only when heating
  156. * Rxxx Wait for extruder current temp to reach target temp. Waits when heating and cooling
  157. * IF AUTOTEMP is enabled, S<mintemp> B<maxtemp> F<factor>. Exit autotemp by any M109 without F
  158. * M110 - Set the current line number
  159. * M111 - Set debug flags with S<mask>. See flag bits defined in enum.h.
  160. * M112 - Emergency stop
  161. * M113 - Get or set the timeout interval for Host Keepalive "busy" messages
  162. * M114 - Output current position to serial port
  163. * M115 - Capabilities string
  164. * M117 - Display a message on the controller screen
  165. * M119 - Output Endstop status to serial port
  166. * M120 - Enable endstop detection
  167. * M121 - Disable endstop detection
  168. * M126 - Solenoid Air Valve Open (BariCUDA support by jmil)
  169. * M127 - Solenoid Air Valve Closed (BariCUDA vent to atmospheric pressure by jmil)
  170. * M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil)
  171. * M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil)
  172. * M140 - Set bed target temp
  173. * M145 - Set the heatup state H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS)
  174. * M149 - Set temperature units
  175. * M150 - Set BlinkM Color Output R: Red<0-255> U(!): Green<0-255> B: Blue<0-255> over i2c, G for green does not work.
  176. * M163 - Set a single proportion for a mixing extruder. Requires MIXING_EXTRUDER.
  177. * M164 - Save the mix as a virtual extruder. Requires MIXING_EXTRUDER and MIXING_VIRTUAL_TOOLS.
  178. * M165 - Set the proportions for a mixing extruder. Use parameters ABCDHI to set the mixing factors. Requires MIXING_EXTRUDER.
  179. * M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating
  180. * Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling
  181. * M200 - Set filament diameter, D<diameter>, setting E axis units to cubic. (Use S0 to revert to linear units.)
  182. * M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000)
  183. * M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!!
  184. * M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in units/sec
  185. * M204 - Set default acceleration: P for Printing moves, R for Retract only (no X, Y, Z) moves and T for Travel (non printing) moves (ex. M204 P800 T3000 R9000) in units/sec^2
  186. * M205 - Set advanced settings. Current units apply:
  187. S<print> T<travel> minimum speeds
  188. B<minimum segment time>
  189. X<max xy jerk>, Z<max Z jerk>, E<max E jerk>
  190. * M206 - Set additional homing offset
  191. * M207 - Set Retract Length: S<length>, Feedrate: F<units/min>, and Z lift: Z<distance>
  192. * M208 - Set Recover (unretract) Additional (!) Length: S<length> and Feedrate: F<units/min>
  193. * M209 - Turn Automatic Retract Detection on/off: S<bool> (For slicers that don't support G10/11).
  194. Every normal extrude-only move will be classified as retract depending on the direction.
  195. * M211 - Enable, Disable, and/or Report software endstops: [S<bool>]
  196. * M218 - Set a tool offset: T<index> X<offset> Y<offset>
  197. * M220 - Set Feedrate Percentage: S<percent> ("FR" on your LCD)
  198. * M221 - Set Flow Percentage: S<percent>
  199. * M226 - Wait until the specified pin reaches the state required: P<pin number> S<pin state>
  200. * M240 - Trigger a camera to take a photograph
  201. * M250 - Set LCD contrast C<contrast value> (value 0..63)
  202. * M280 - Set servo position absolute. P: servo index, S: angle or microseconds
  203. * M300 - Play beep sound S<frequency Hz> P<duration ms>
  204. * M301 - Set PID parameters P I and D
  205. * M302 - Allow cold extrudes, or set the minimum extrude S<temperature>.
  206. * M303 - PID relay autotune S<temperature> sets the target temperature. (default target temperature = 150C)
  207. * M304 - Set bed PID parameters P I and D
  208. * M380 - Activate solenoid on active extruder
  209. * M381 - Disable all solenoids
  210. * M400 - Finish all moves
  211. * M401 - Lower Z probe if present
  212. * M402 - Raise Z probe if present
  213. * M404 - Display or set the Nominal Filament Width: [ N<diameter> ]
  214. * M405 - Enable Filament Sensor extrusion control. Optional delay between sensor and extruder: D<cm>
  215. * M406 - Disable Filament Sensor extrusion control
  216. * M407 - Display measured filament diameter in millimeters
  217. * M410 - Quickstop. Abort all the planned moves
  218. * M420 - Enable/Disable Mesh Leveling (with current values) S1=enable S0=disable
  219. * M421 - Set a single Z coordinate in the Mesh Leveling grid. X<units> Y<units> Z<units>
  220. * M428 - Set the home_offset logically based on the current_position
  221. * M500 - Store parameters in EEPROM
  222. * M501 - Read parameters from EEPROM (if you need reset them after you changed them temporarily).
  223. * M502 - Revert to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
  224. * M503 - Print the current settings (from memory not from EEPROM). Use S0 to leave off headings.
  225. * M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
  226. * M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
  227. * M665 - Set delta configurations: L<diagonal rod> R<delta radius> S<segments/s>
  228. * M666 - Set delta endstop adjustment
  229. * M605 - Set dual x-carriage movement mode: S<mode> [ X<duplication x-offset> R<duplication temp offset> ]
  230. * M851 - Set Z probe's Z offset in current units. (Negative values apply to probes that extend below the nozzle.)
  231. * M907 - Set digital trimpot motor current using axis codes.
  232. * M908 - Control digital trimpot directly.
  233. * M909 - DAC_STEPPER_CURRENT: Print digipot/DAC current value
  234. * M910 - DAC_STEPPER_CURRENT: Commit digipot/DAC value to external EEPROM via I2C
  235. * M350 - Set microstepping mode.
  236. * M351 - Toggle MS1 MS2 pins directly.
  237. *
  238. * ************ SCARA Specific - This can change to suit future G-code regulations
  239. * M360 - SCARA calibration: Move to cal-position ThetaA (0 deg calibration)
  240. * M361 - SCARA calibration: Move to cal-position ThetaB (90 deg calibration - steps per degree)
  241. * M362 - SCARA calibration: Move to cal-position PsiA (0 deg calibration)
  242. * M363 - SCARA calibration: Move to cal-position PsiB (90 deg calibration - steps per degree)
  243. * M364 - SCARA calibration: Move to cal-position PSIC (90 deg to Theta calibration position)
  244. * M365 - SCARA calibration: Scaling factor, X, Y, Z axis
  245. * ************* SCARA End ***************
  246. *
  247. * ************ Custom codes - This can change to suit future G-code regulations
  248. * M100 - Watch Free Memory (For Debugging Only)
  249. * M928 - Start SD logging (M928 filename.g) - ended by M29
  250. * M999 - Restart after being stopped by error
  251. *
  252. * "T" Codes
  253. *
  254. * T0-T3 - Select a tool by index (usually an extruder) [ F<units/min> ]
  255. *
  256. */
  257. #if ENABLED(M100_FREE_MEMORY_WATCHER)
  258. void gcode_M100();
  259. #endif
  260. #if ENABLED(SDSUPPORT)
  261. CardReader card;
  262. #endif
  263. #if ENABLED(EXPERIMENTAL_I2CBUS)
  264. TWIBus i2c;
  265. #endif
  266. bool Running = true;
  267. uint8_t marlin_debug_flags = DEBUG_NONE;
  268. float current_position[NUM_AXIS] = { 0.0 };
  269. static float destination[NUM_AXIS] = { 0.0 };
  270. bool axis_known_position[XYZ] = { false };
  271. bool axis_homed[XYZ] = { false };
  272. static long gcode_N, gcode_LastN, Stopped_gcode_LastN = 0;
  273. static char command_queue[BUFSIZE][MAX_CMD_SIZE];
  274. static char* current_command, *current_command_args;
  275. static uint8_t cmd_queue_index_r = 0,
  276. cmd_queue_index_w = 0,
  277. commands_in_queue = 0;
  278. #if ENABLED(INCH_MODE_SUPPORT)
  279. float linear_unit_factor = 1.0;
  280. float volumetric_unit_factor = 1.0;
  281. #endif
  282. #if ENABLED(TEMPERATURE_UNITS_SUPPORT)
  283. TempUnit input_temp_units = TEMPUNIT_C;
  284. #endif
  285. /**
  286. * Feed rates are often configured with mm/m
  287. * but the planner and stepper like mm/s units.
  288. */
  289. const float homing_feedrate_mm_s[] = {
  290. #if ENABLED(DELTA)
  291. MMM_TO_MMS(HOMING_FEEDRATE_Z), MMM_TO_MMS(HOMING_FEEDRATE_Z),
  292. #else
  293. MMM_TO_MMS(HOMING_FEEDRATE_XY), MMM_TO_MMS(HOMING_FEEDRATE_XY),
  294. #endif
  295. MMM_TO_MMS(HOMING_FEEDRATE_Z), 0
  296. };
  297. static float feedrate_mm_s = MMM_TO_MMS(1500.0), saved_feedrate_mm_s;
  298. int feedrate_percentage = 100, saved_feedrate_percentage;
  299. bool axis_relative_modes[] = AXIS_RELATIVE_MODES;
  300. int flow_percentage[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(100);
  301. bool volumetric_enabled = false;
  302. float filament_size[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(DEFAULT_NOMINAL_FILAMENT_DIA);
  303. float volumetric_multiplier[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(1.0);
  304. // The distance that XYZ has been offset by G92. Reset by G28.
  305. float position_shift[XYZ] = { 0 };
  306. // This offset is added to the configured home position.
  307. // Set by M206, M428, or menu item. Saved to EEPROM.
  308. float home_offset[XYZ] = { 0 };
  309. // Software Endstops are based on the configured limits.
  310. #if ENABLED(min_software_endstops) || ENABLED(max_software_endstops)
  311. bool soft_endstops_enabled = true;
  312. #endif
  313. float soft_endstop_min[XYZ] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS },
  314. soft_endstop_max[XYZ] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS };
  315. #if FAN_COUNT > 0
  316. int fanSpeeds[FAN_COUNT] = { 0 };
  317. #endif
  318. // The active extruder (tool). Set with T<extruder> command.
  319. uint8_t active_extruder = 0;
  320. // Relative Mode. Enable with G91, disable with G90.
  321. static bool relative_mode = false;
  322. volatile bool wait_for_heatup = true;
  323. const char errormagic[] PROGMEM = "Error:";
  324. const char echomagic[] PROGMEM = "echo:";
  325. const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'};
  326. static int serial_count = 0;
  327. // GCode parameter pointer used by code_seen(), code_value_float(), etc.
  328. static char* seen_pointer;
  329. // Next Immediate GCode Command pointer. NULL if none.
  330. const char* queued_commands_P = NULL;
  331. const int sensitive_pins[] = SENSITIVE_PINS; ///< Sensitive pin list for M42
  332. // Inactivity shutdown
  333. millis_t previous_cmd_ms = 0;
  334. static millis_t max_inactive_time = 0;
  335. static millis_t stepper_inactive_time = (DEFAULT_STEPPER_DEACTIVE_TIME) * 1000UL;
  336. // Print Job Timer
  337. #if ENABLED(PRINTCOUNTER)
  338. PrintCounter print_job_timer = PrintCounter();
  339. #else
  340. Stopwatch print_job_timer = Stopwatch();
  341. #endif
  342. // Buzzer - I2C on the LCD or a BEEPER_PIN
  343. #if ENABLED(LCD_USE_I2C_BUZZER)
  344. #define BUZZ(d,f) lcd_buzz(d, f)
  345. #elif HAS_BUZZER
  346. Buzzer buzzer;
  347. #define BUZZ(d,f) buzzer.tone(d, f)
  348. #else
  349. #define BUZZ(d,f) NOOP
  350. #endif
  351. static uint8_t target_extruder;
  352. #if HAS_BED_PROBE
  353. float zprobe_zoffset = Z_PROBE_OFFSET_FROM_EXTRUDER;
  354. #endif
  355. #define PLANNER_XY_FEEDRATE() (min(planner.max_feedrate_mm_s[X_AXIS], planner.max_feedrate_mm_s[Y_AXIS]))
  356. #if ENABLED(AUTO_BED_LEVELING_FEATURE)
  357. float xy_probe_feedrate_mm_s = MMM_TO_MMS(XY_PROBE_SPEED);
  358. bool bed_leveling_in_progress = false;
  359. #define XY_PROBE_FEEDRATE_MM_S xy_probe_feedrate_mm_s
  360. #elif defined(XY_PROBE_SPEED)
  361. #define XY_PROBE_FEEDRATE_MM_S MMM_TO_MMS(XY_PROBE_SPEED)
  362. #else
  363. #define XY_PROBE_FEEDRATE_MM_S PLANNER_XY_FEEDRATE()
  364. #endif
  365. #if ENABLED(Z_DUAL_ENDSTOPS)
  366. float z_endstop_adj = 0;
  367. #endif
  368. // Extruder offsets
  369. #if HOTENDS > 1
  370. float hotend_offset[][HOTENDS] = {
  371. HOTEND_OFFSET_X,
  372. HOTEND_OFFSET_Y
  373. #ifdef HOTEND_OFFSET_Z
  374. , HOTEND_OFFSET_Z
  375. #endif
  376. };
  377. #endif
  378. #if HAS_Z_SERVO_ENDSTOP
  379. const int z_servo_angle[2] = Z_SERVO_ANGLES;
  380. #endif
  381. #if ENABLED(BARICUDA)
  382. int baricuda_valve_pressure = 0;
  383. int baricuda_e_to_p_pressure = 0;
  384. #endif
  385. #if ENABLED(FWRETRACT)
  386. bool autoretract_enabled = false;
  387. bool retracted[EXTRUDERS] = { false };
  388. bool retracted_swap[EXTRUDERS] = { false };
  389. float retract_length = RETRACT_LENGTH;
  390. float retract_length_swap = RETRACT_LENGTH_SWAP;
  391. float retract_feedrate_mm_s = RETRACT_FEEDRATE;
  392. float retract_zlift = RETRACT_ZLIFT;
  393. float retract_recover_length = RETRACT_RECOVER_LENGTH;
  394. float retract_recover_length_swap = RETRACT_RECOVER_LENGTH_SWAP;
  395. float retract_recover_feedrate_mm_s = RETRACT_RECOVER_FEEDRATE;
  396. #endif // FWRETRACT
  397. #if ENABLED(ULTIPANEL) && HAS_POWER_SWITCH
  398. bool powersupply =
  399. #if ENABLED(PS_DEFAULT_OFF)
  400. false
  401. #else
  402. true
  403. #endif
  404. ;
  405. #endif
  406. #if ENABLED(DELTA)
  407. #define TOWER_1 X_AXIS
  408. #define TOWER_2 Y_AXIS
  409. #define TOWER_3 Z_AXIS
  410. float delta[ABC];
  411. float cartesian_position[XYZ] = { 0 };
  412. #define SIN_60 0.8660254037844386
  413. #define COS_60 0.5
  414. float endstop_adj[ABC] = { 0 };
  415. // these are the default values, can be overriden with M665
  416. float delta_radius = DELTA_RADIUS;
  417. float delta_tower1_x = -SIN_60 * (delta_radius + DELTA_RADIUS_TRIM_TOWER_1); // front left tower
  418. float delta_tower1_y = -COS_60 * (delta_radius + DELTA_RADIUS_TRIM_TOWER_1);
  419. float delta_tower2_x = SIN_60 * (delta_radius + DELTA_RADIUS_TRIM_TOWER_2); // front right tower
  420. float delta_tower2_y = -COS_60 * (delta_radius + DELTA_RADIUS_TRIM_TOWER_2);
  421. float delta_tower3_x = 0; // back middle tower
  422. float delta_tower3_y = (delta_radius + DELTA_RADIUS_TRIM_TOWER_3);
  423. float delta_diagonal_rod = DELTA_DIAGONAL_ROD;
  424. float delta_diagonal_rod_trim_tower_1 = DELTA_DIAGONAL_ROD_TRIM_TOWER_1;
  425. float delta_diagonal_rod_trim_tower_2 = DELTA_DIAGONAL_ROD_TRIM_TOWER_2;
  426. float delta_diagonal_rod_trim_tower_3 = DELTA_DIAGONAL_ROD_TRIM_TOWER_3;
  427. float delta_diagonal_rod_2_tower_1 = sq(delta_diagonal_rod + delta_diagonal_rod_trim_tower_1);
  428. float delta_diagonal_rod_2_tower_2 = sq(delta_diagonal_rod + delta_diagonal_rod_trim_tower_2);
  429. float delta_diagonal_rod_2_tower_3 = sq(delta_diagonal_rod + delta_diagonal_rod_trim_tower_3);
  430. float delta_segments_per_second = DELTA_SEGMENTS_PER_SECOND;
  431. float delta_clip_start_height = Z_MAX_POS;
  432. #if ENABLED(AUTO_BED_LEVELING_FEATURE)
  433. int delta_grid_spacing[2] = { 0, 0 };
  434. float bed_level[AUTO_BED_LEVELING_GRID_POINTS][AUTO_BED_LEVELING_GRID_POINTS];
  435. #endif
  436. float delta_safe_distance_from_top();
  437. #else
  438. static bool home_all_axis = true;
  439. #endif
  440. #if ENABLED(SCARA)
  441. float delta_segments_per_second = SCARA_SEGMENTS_PER_SECOND;
  442. float delta[ABC];
  443. float axis_scaling[ABC] = { 1, 1, 1 }; // Build size scaling, default to 1
  444. #endif
  445. #if ENABLED(FILAMENT_WIDTH_SENSOR)
  446. //Variables for Filament Sensor input
  447. float filament_width_nominal = DEFAULT_NOMINAL_FILAMENT_DIA; //Set nominal filament width, can be changed with M404
  448. bool filament_sensor = false; //M405 turns on filament_sensor control, M406 turns it off
  449. float filament_width_meas = DEFAULT_MEASURED_FILAMENT_DIA; //Stores the measured filament diameter
  450. int8_t measurement_delay[MAX_MEASUREMENT_DELAY + 1]; //ring buffer to delay measurement store extruder factor after subtracting 100
  451. int filwidth_delay_index1 = 0; //index into ring buffer
  452. int filwidth_delay_index2 = -1; //index into ring buffer - set to -1 on startup to indicate ring buffer needs to be initialized
  453. int meas_delay_cm = MEASUREMENT_DELAY_CM; //distance delay setting
  454. #endif
  455. #if ENABLED(FILAMENT_RUNOUT_SENSOR)
  456. static bool filament_ran_out = false;
  457. #endif
  458. #if ENABLED(FILAMENT_CHANGE_FEATURE)
  459. FilamentChangeMenuResponse filament_change_menu_response;
  460. #endif
  461. #if ENABLED(MIXING_EXTRUDER)
  462. float mixing_factor[MIXING_STEPPERS];
  463. #if MIXING_VIRTUAL_TOOLS > 1
  464. float mixing_virtual_tool_mix[MIXING_VIRTUAL_TOOLS][MIXING_STEPPERS];
  465. #endif
  466. #endif
  467. static bool send_ok[BUFSIZE];
  468. #if HAS_SERVOS
  469. Servo servo[NUM_SERVOS];
  470. #define MOVE_SERVO(I, P) servo[I].move(P)
  471. #if HAS_Z_SERVO_ENDSTOP
  472. #define DEPLOY_Z_SERVO() MOVE_SERVO(Z_ENDSTOP_SERVO_NR, z_servo_angle[0])
  473. #define STOW_Z_SERVO() MOVE_SERVO(Z_ENDSTOP_SERVO_NR, z_servo_angle[1])
  474. #endif
  475. #endif
  476. #ifdef CHDK
  477. millis_t chdkHigh = 0;
  478. boolean chdkActive = false;
  479. #endif
  480. #if ENABLED(PID_EXTRUSION_SCALING)
  481. int lpq_len = 20;
  482. #endif
  483. #if ENABLED(HOST_KEEPALIVE_FEATURE)
  484. static MarlinBusyState busy_state = NOT_BUSY;
  485. static millis_t next_busy_signal_ms = 0;
  486. uint8_t host_keepalive_interval = DEFAULT_KEEPALIVE_INTERVAL;
  487. #define KEEPALIVE_STATE(n) do{ busy_state = n; }while(0)
  488. #else
  489. #define host_keepalive() ;
  490. #define KEEPALIVE_STATE(n) ;
  491. #endif // HOST_KEEPALIVE_FEATURE
  492. /**
  493. * ***************************************************************************
  494. * ******************************** FUNCTIONS ********************************
  495. * ***************************************************************************
  496. */
  497. void stop();
  498. void get_available_commands();
  499. void process_next_command();
  500. void prepare_move_to_destination();
  501. void set_current_from_steppers_for_axis(AxisEnum axis);
  502. #if ENABLED(ARC_SUPPORT)
  503. void plan_arc(float target[NUM_AXIS], float* offset, uint8_t clockwise);
  504. #endif
  505. #if ENABLED(BEZIER_CURVE_SUPPORT)
  506. void plan_cubic_move(const float offset[4]);
  507. #endif
  508. void serial_echopair_P(const char* s_P, const char *v) { serialprintPGM(s_P); SERIAL_ECHO(v); }
  509. void serial_echopair_P(const char* s_P, char v) { serialprintPGM(s_P); SERIAL_CHAR(v); }
  510. void serial_echopair_P(const char* s_P, int v) { serialprintPGM(s_P); SERIAL_ECHO(v); }
  511. void serial_echopair_P(const char* s_P, long v) { serialprintPGM(s_P); SERIAL_ECHO(v); }
  512. void serial_echopair_P(const char* s_P, float v) { serialprintPGM(s_P); SERIAL_ECHO(v); }
  513. void serial_echopair_P(const char* s_P, double v) { serialprintPGM(s_P); SERIAL_ECHO(v); }
  514. void serial_echopair_P(const char* s_P, unsigned long v) { serialprintPGM(s_P); SERIAL_ECHO(v); }
  515. void tool_change(const uint8_t tmp_extruder, const float fr_mm_s=0.0, bool no_move=false);
  516. static void report_current_position();
  517. #if ENABLED(DEBUG_LEVELING_FEATURE)
  518. void print_xyz(const char* prefix, const char* suffix, const float x, const float y, const float z) {
  519. serialprintPGM(prefix);
  520. SERIAL_ECHOPAIR("(", x);
  521. SERIAL_ECHOPAIR(", ", y);
  522. SERIAL_ECHOPAIR(", ", z);
  523. SERIAL_ECHOPGM(")");
  524. if (suffix) serialprintPGM(suffix);
  525. else SERIAL_EOL;
  526. }
  527. void print_xyz(const char* prefix, const char* suffix, const float xyz[]) {
  528. print_xyz(prefix, suffix, xyz[X_AXIS], xyz[Y_AXIS], xyz[Z_AXIS]);
  529. }
  530. #if ENABLED(AUTO_BED_LEVELING_FEATURE)
  531. void print_xyz(const char* prefix, const char* suffix, const vector_3 &xyz) {
  532. print_xyz(prefix, suffix, xyz.x, xyz.y, xyz.z);
  533. }
  534. #endif
  535. #define DEBUG_POS(SUFFIX,VAR) do { \
  536. print_xyz(PSTR(STRINGIFY(VAR) "="), PSTR(" : " SUFFIX "\n"), VAR); } while(0)
  537. #endif
  538. /**
  539. * sync_plan_position
  540. * Set planner / stepper positions to the cartesian current_position.
  541. * The stepper code translates these coordinates into step units.
  542. * Allows translation between steps and millimeters for cartesian & core robots
  543. */
  544. inline void sync_plan_position() {
  545. #if ENABLED(DEBUG_LEVELING_FEATURE)
  546. if (DEBUGGING(LEVELING)) DEBUG_POS("sync_plan_position", current_position);
  547. #endif
  548. planner.set_position_mm(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  549. }
  550. inline void sync_plan_position_e() { planner.set_e_position_mm(current_position[E_AXIS]); }
  551. #if ENABLED(DELTA) || ENABLED(SCARA)
  552. inline void sync_plan_position_delta() {
  553. #if ENABLED(DEBUG_LEVELING_FEATURE)
  554. if (DEBUGGING(LEVELING)) DEBUG_POS("sync_plan_position_delta", current_position);
  555. #endif
  556. inverse_kinematics(current_position);
  557. planner.set_position_mm(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS]);
  558. }
  559. #define SYNC_PLAN_POSITION_KINEMATIC() sync_plan_position_delta()
  560. #else
  561. #define SYNC_PLAN_POSITION_KINEMATIC() sync_plan_position()
  562. #endif
  563. #if ENABLED(SDSUPPORT)
  564. #include "SdFatUtil.h"
  565. int freeMemory() { return SdFatUtil::FreeRam(); }
  566. #else
  567. extern "C" {
  568. extern unsigned int __bss_end;
  569. extern unsigned int __heap_start;
  570. extern void* __brkval;
  571. int freeMemory() {
  572. int free_memory;
  573. if ((int)__brkval == 0)
  574. free_memory = ((int)&free_memory) - ((int)&__bss_end);
  575. else
  576. free_memory = ((int)&free_memory) - ((int)__brkval);
  577. return free_memory;
  578. }
  579. }
  580. #endif //!SDSUPPORT
  581. #if ENABLED(DIGIPOT_I2C)
  582. extern void digipot_i2c_set_current(int channel, float current);
  583. extern void digipot_i2c_init();
  584. #endif
  585. /**
  586. * Inject the next "immediate" command, when possible.
  587. * Return true if any immediate commands remain to inject.
  588. */
  589. static bool drain_queued_commands_P() {
  590. if (queued_commands_P != NULL) {
  591. size_t i = 0;
  592. char c, cmd[30];
  593. strncpy_P(cmd, queued_commands_P, sizeof(cmd) - 1);
  594. cmd[sizeof(cmd) - 1] = '\0';
  595. while ((c = cmd[i]) && c != '\n') i++; // find the end of this gcode command
  596. cmd[i] = '\0';
  597. if (enqueue_and_echo_command(cmd)) { // success?
  598. if (c) // newline char?
  599. queued_commands_P += i + 1; // advance to the next command
  600. else
  601. queued_commands_P = NULL; // nul char? no more commands
  602. }
  603. }
  604. return (queued_commands_P != NULL); // return whether any more remain
  605. }
  606. /**
  607. * Record one or many commands to run from program memory.
  608. * Aborts the current queue, if any.
  609. * Note: drain_queued_commands_P() must be called repeatedly to drain the commands afterwards
  610. */
  611. void enqueue_and_echo_commands_P(const char* pgcode) {
  612. queued_commands_P = pgcode;
  613. drain_queued_commands_P(); // first command executed asap (when possible)
  614. }
  615. void clear_command_queue() {
  616. cmd_queue_index_r = cmd_queue_index_w;
  617. commands_in_queue = 0;
  618. }
  619. /**
  620. * Once a new command is in the ring buffer, call this to commit it
  621. */
  622. inline void _commit_command(bool say_ok) {
  623. send_ok[cmd_queue_index_w] = say_ok;
  624. cmd_queue_index_w = (cmd_queue_index_w + 1) % BUFSIZE;
  625. commands_in_queue++;
  626. }
  627. /**
  628. * Copy a command directly into the main command buffer, from RAM.
  629. * Returns true if successfully adds the command
  630. */
  631. inline bool _enqueuecommand(const char* cmd, bool say_ok=false) {
  632. if (*cmd == ';' || commands_in_queue >= BUFSIZE) return false;
  633. strcpy(command_queue[cmd_queue_index_w], cmd);
  634. _commit_command(say_ok);
  635. return true;
  636. }
  637. void enqueue_and_echo_command_now(const char* cmd) {
  638. while (!enqueue_and_echo_command(cmd)) idle();
  639. }
  640. /**
  641. * Enqueue with Serial Echo
  642. */
  643. bool enqueue_and_echo_command(const char* cmd, bool say_ok/*=false*/) {
  644. if (_enqueuecommand(cmd, say_ok)) {
  645. SERIAL_ECHO_START;
  646. SERIAL_ECHOPGM(MSG_Enqueueing);
  647. SERIAL_ECHO(cmd);
  648. SERIAL_ECHOLNPGM("\"");
  649. return true;
  650. }
  651. return false;
  652. }
  653. void setup_killpin() {
  654. #if HAS_KILL
  655. SET_INPUT(KILL_PIN);
  656. WRITE(KILL_PIN, HIGH);
  657. #endif
  658. }
  659. #if ENABLED(FILAMENT_RUNOUT_SENSOR)
  660. void setup_filrunoutpin() {
  661. pinMode(FIL_RUNOUT_PIN, INPUT);
  662. #if ENABLED(ENDSTOPPULLUP_FIL_RUNOUT)
  663. WRITE(FIL_RUNOUT_PIN, HIGH);
  664. #endif
  665. }
  666. #endif
  667. // Set home pin
  668. void setup_homepin(void) {
  669. #if HAS_HOME
  670. SET_INPUT(HOME_PIN);
  671. WRITE(HOME_PIN, HIGH);
  672. #endif
  673. }
  674. void setup_photpin() {
  675. #if HAS_PHOTOGRAPH
  676. OUT_WRITE(PHOTOGRAPH_PIN, LOW);
  677. #endif
  678. }
  679. void setup_powerhold() {
  680. #if HAS_SUICIDE
  681. OUT_WRITE(SUICIDE_PIN, HIGH);
  682. #endif
  683. #if HAS_POWER_SWITCH
  684. #if ENABLED(PS_DEFAULT_OFF)
  685. OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP);
  686. #else
  687. OUT_WRITE(PS_ON_PIN, PS_ON_AWAKE);
  688. #endif
  689. #endif
  690. }
  691. void suicide() {
  692. #if HAS_SUICIDE
  693. OUT_WRITE(SUICIDE_PIN, LOW);
  694. #endif
  695. }
  696. void servo_init() {
  697. #if NUM_SERVOS >= 1 && HAS_SERVO_0
  698. servo[0].attach(SERVO0_PIN);
  699. servo[0].detach(); // Just set up the pin. We don't have a position yet. Don't move to a random position.
  700. #endif
  701. #if NUM_SERVOS >= 2 && HAS_SERVO_1
  702. servo[1].attach(SERVO1_PIN);
  703. servo[1].detach();
  704. #endif
  705. #if NUM_SERVOS >= 3 && HAS_SERVO_2
  706. servo[2].attach(SERVO2_PIN);
  707. servo[2].detach();
  708. #endif
  709. #if NUM_SERVOS >= 4 && HAS_SERVO_3
  710. servo[3].attach(SERVO3_PIN);
  711. servo[3].detach();
  712. #endif
  713. #if HAS_Z_SERVO_ENDSTOP
  714. /**
  715. * Set position of Z Servo Endstop
  716. *
  717. * The servo might be deployed and positioned too low to stow
  718. * when starting up the machine or rebooting the board.
  719. * There's no way to know where the nozzle is positioned until
  720. * homing has been done - no homing with z-probe without init!
  721. *
  722. */
  723. STOW_Z_SERVO();
  724. #endif
  725. #if HAS_BED_PROBE
  726. endstops.enable_z_probe(false);
  727. #endif
  728. }
  729. /**
  730. * Stepper Reset (RigidBoard, et.al.)
  731. */
  732. #if HAS_STEPPER_RESET
  733. void disableStepperDrivers() {
  734. pinMode(STEPPER_RESET_PIN, OUTPUT);
  735. digitalWrite(STEPPER_RESET_PIN, LOW); // drive it down to hold in reset motor driver chips
  736. }
  737. void enableStepperDrivers() { pinMode(STEPPER_RESET_PIN, INPUT); } // set to input, which allows it to be pulled high by pullups
  738. #endif
  739. #if ENABLED(EXPERIMENTAL_I2CBUS) && I2C_SLAVE_ADDRESS > 0
  740. void i2c_on_receive(int bytes) { // just echo all bytes received to serial
  741. i2c.receive(bytes);
  742. }
  743. void i2c_on_request() { // just send dummy data for now
  744. i2c.reply("Hello World!\n");
  745. }
  746. #endif
  747. /**
  748. * Marlin entry-point: Set up before the program loop
  749. * - Set up the kill pin, filament runout, power hold
  750. * - Start the serial port
  751. * - Print startup messages and diagnostics
  752. * - Get EEPROM or default settings
  753. * - Initialize managers for:
  754. * • temperature
  755. * • planner
  756. * • watchdog
  757. * • stepper
  758. * • photo pin
  759. * • servos
  760. * • LCD controller
  761. * • Digipot I2C
  762. * • Z probe sled
  763. * • status LEDs
  764. */
  765. void setup() {
  766. #ifdef DISABLE_JTAG
  767. // Disable JTAG on AT90USB chips to free up pins for IO
  768. MCUCR = 0x80;
  769. MCUCR = 0x80;
  770. #endif
  771. #if ENABLED(FILAMENT_RUNOUT_SENSOR)
  772. setup_filrunoutpin();
  773. #endif
  774. setup_killpin();
  775. setup_powerhold();
  776. #if HAS_STEPPER_RESET
  777. disableStepperDrivers();
  778. #endif
  779. MYSERIAL.begin(BAUDRATE);
  780. SERIAL_PROTOCOLLNPGM("start");
  781. SERIAL_ECHO_START;
  782. // Check startup - does nothing if bootloader sets MCUSR to 0
  783. byte mcu = MCUSR;
  784. if (mcu & 1) SERIAL_ECHOLNPGM(MSG_POWERUP);
  785. if (mcu & 2) SERIAL_ECHOLNPGM(MSG_EXTERNAL_RESET);
  786. if (mcu & 4) SERIAL_ECHOLNPGM(MSG_BROWNOUT_RESET);
  787. if (mcu & 8) SERIAL_ECHOLNPGM(MSG_WATCHDOG_RESET);
  788. if (mcu & 32) SERIAL_ECHOLNPGM(MSG_SOFTWARE_RESET);
  789. MCUSR = 0;
  790. SERIAL_ECHOPGM(MSG_MARLIN);
  791. SERIAL_ECHOLNPGM(" " SHORT_BUILD_VERSION);
  792. #ifdef STRING_DISTRIBUTION_DATE
  793. #ifdef STRING_CONFIG_H_AUTHOR
  794. SERIAL_ECHO_START;
  795. SERIAL_ECHOPGM(MSG_CONFIGURATION_VER);
  796. SERIAL_ECHOPGM(STRING_DISTRIBUTION_DATE);
  797. SERIAL_ECHOPGM(MSG_AUTHOR);
  798. SERIAL_ECHOLNPGM(STRING_CONFIG_H_AUTHOR);
  799. SERIAL_ECHOPGM("Compiled: ");
  800. SERIAL_ECHOLNPGM(__DATE__);
  801. #endif // STRING_CONFIG_H_AUTHOR
  802. #endif // STRING_DISTRIBUTION_DATE
  803. SERIAL_ECHO_START;
  804. SERIAL_ECHOPGM(MSG_FREE_MEMORY);
  805. SERIAL_ECHO(freeMemory());
  806. SERIAL_ECHOPGM(MSG_PLANNER_BUFFER_BYTES);
  807. SERIAL_ECHOLN((int)sizeof(block_t)*BLOCK_BUFFER_SIZE);
  808. // Send "ok" after commands by default
  809. for (int8_t i = 0; i < BUFSIZE; i++) send_ok[i] = true;
  810. // Load data from EEPROM if available (or use defaults)
  811. // This also updates variables in the planner, elsewhere
  812. Config_RetrieveSettings();
  813. // Initialize current position based on home_offset
  814. memcpy(current_position, home_offset, sizeof(home_offset));
  815. // Vital to init stepper/planner equivalent for current_position
  816. SYNC_PLAN_POSITION_KINEMATIC();
  817. thermalManager.init(); // Initialize temperature loop
  818. #if ENABLED(USE_WATCHDOG)
  819. watchdog_init();
  820. #endif
  821. stepper.init(); // Initialize stepper, this enables interrupts!
  822. setup_photpin();
  823. servo_init();
  824. #if HAS_CONTROLLERFAN
  825. SET_OUTPUT(CONTROLLERFAN_PIN); //Set pin used for driver cooling fan
  826. #endif
  827. #if HAS_STEPPER_RESET
  828. enableStepperDrivers();
  829. #endif
  830. #if ENABLED(DIGIPOT_I2C)
  831. digipot_i2c_init();
  832. #endif
  833. #if ENABLED(DAC_STEPPER_CURRENT)
  834. dac_init();
  835. #endif
  836. #if ENABLED(Z_PROBE_SLED) && PIN_EXISTS(SLED)
  837. pinMode(SLED_PIN, OUTPUT);
  838. digitalWrite(SLED_PIN, LOW); // turn it off
  839. #endif // Z_PROBE_SLED
  840. setup_homepin();
  841. #ifdef STAT_LED_RED
  842. pinMode(STAT_LED_RED, OUTPUT);
  843. digitalWrite(STAT_LED_RED, LOW); // turn it off
  844. #endif
  845. #ifdef STAT_LED_BLUE
  846. pinMode(STAT_LED_BLUE, OUTPUT);
  847. digitalWrite(STAT_LED_BLUE, LOW); // turn it off
  848. #endif
  849. lcd_init();
  850. #if ENABLED(SHOW_BOOTSCREEN)
  851. #if ENABLED(DOGLCD)
  852. safe_delay(BOOTSCREEN_TIMEOUT);
  853. #elif ENABLED(ULTRA_LCD)
  854. bootscreen();
  855. lcd_init();
  856. #endif
  857. #endif
  858. #if ENABLED(MIXING_EXTRUDER) && MIXING_VIRTUAL_TOOLS > 1
  859. // Initialize mixing to 100% color 1
  860. for (uint8_t i = 0; i < MIXING_STEPPERS; i++)
  861. mixing_factor[i] = (i == 0) ? 1 : 0;
  862. for (uint8_t t = 0; t < MIXING_VIRTUAL_TOOLS; t++)
  863. for (uint8_t i = 0; i < MIXING_STEPPERS; i++)
  864. mixing_virtual_tool_mix[t][i] = mixing_factor[i];
  865. #endif
  866. #if ENABLED(EXPERIMENTAL_I2CBUS) && I2C_SLAVE_ADDRESS > 0
  867. i2c.onReceive(i2c_on_receive);
  868. i2c.onRequest(i2c_on_request);
  869. #endif
  870. }
  871. /**
  872. * The main Marlin program loop
  873. *
  874. * - Save or log commands to SD
  875. * - Process available commands (if not saving)
  876. * - Call heater manager
  877. * - Call inactivity manager
  878. * - Call endstop manager
  879. * - Call LCD update
  880. */
  881. void loop() {
  882. if (commands_in_queue < BUFSIZE) get_available_commands();
  883. #if ENABLED(SDSUPPORT)
  884. card.checkautostart(false);
  885. #endif
  886. if (commands_in_queue) {
  887. #if ENABLED(SDSUPPORT)
  888. if (card.saving) {
  889. char* command = command_queue[cmd_queue_index_r];
  890. if (strstr_P(command, PSTR("M29"))) {
  891. // M29 closes the file
  892. card.closefile();
  893. SERIAL_PROTOCOLLNPGM(MSG_FILE_SAVED);
  894. ok_to_send();
  895. }
  896. else {
  897. // Write the string from the read buffer to SD
  898. card.write_command(command);
  899. if (card.logging)
  900. process_next_command(); // The card is saving because it's logging
  901. else
  902. ok_to_send();
  903. }
  904. }
  905. else
  906. process_next_command();
  907. #else
  908. process_next_command();
  909. #endif // SDSUPPORT
  910. // The queue may be reset by a command handler or by code invoked by idle() within a handler
  911. if (commands_in_queue) {
  912. --commands_in_queue;
  913. cmd_queue_index_r = (cmd_queue_index_r + 1) % BUFSIZE;
  914. }
  915. }
  916. endstops.report_state();
  917. idle();
  918. }
  919. void gcode_line_error(const char* err, bool doFlush = true) {
  920. SERIAL_ERROR_START;
  921. serialprintPGM(err);
  922. SERIAL_ERRORLN(gcode_LastN);
  923. //Serial.println(gcode_N);
  924. if (doFlush) FlushSerialRequestResend();
  925. serial_count = 0;
  926. }
  927. inline void get_serial_commands() {
  928. static char serial_line_buffer[MAX_CMD_SIZE];
  929. static boolean serial_comment_mode = false;
  930. // If the command buffer is empty for too long,
  931. // send "wait" to indicate Marlin is still waiting.
  932. #if defined(NO_TIMEOUTS) && NO_TIMEOUTS > 0
  933. static millis_t last_command_time = 0;
  934. millis_t ms = millis();
  935. if (commands_in_queue == 0 && !MYSERIAL.available() && ELAPSED(ms, last_command_time + NO_TIMEOUTS)) {
  936. SERIAL_ECHOLNPGM(MSG_WAIT);
  937. last_command_time = ms;
  938. }
  939. #endif
  940. /**
  941. * Loop while serial characters are incoming and the queue is not full
  942. */
  943. while (commands_in_queue < BUFSIZE && MYSERIAL.available() > 0) {
  944. char serial_char = MYSERIAL.read();
  945. /**
  946. * If the character ends the line
  947. */
  948. if (serial_char == '\n' || serial_char == '\r') {
  949. serial_comment_mode = false; // end of line == end of comment
  950. if (!serial_count) continue; // skip empty lines
  951. serial_line_buffer[serial_count] = 0; // terminate string
  952. serial_count = 0; //reset buffer
  953. char* command = serial_line_buffer;
  954. while (*command == ' ') command++; // skip any leading spaces
  955. char* npos = (*command == 'N') ? command : NULL; // Require the N parameter to start the line
  956. char* apos = strchr(command, '*');
  957. if (npos) {
  958. boolean M110 = strstr_P(command, PSTR("M110")) != NULL;
  959. if (M110) {
  960. char* n2pos = strchr(command + 4, 'N');
  961. if (n2pos) npos = n2pos;
  962. }
  963. gcode_N = strtol(npos + 1, NULL, 10);
  964. if (gcode_N != gcode_LastN + 1 && !M110) {
  965. gcode_line_error(PSTR(MSG_ERR_LINE_NO));
  966. return;
  967. }
  968. if (apos) {
  969. byte checksum = 0, count = 0;
  970. while (command[count] != '*') checksum ^= command[count++];
  971. if (strtol(apos + 1, NULL, 10) != checksum) {
  972. gcode_line_error(PSTR(MSG_ERR_CHECKSUM_MISMATCH));
  973. return;
  974. }
  975. // if no errors, continue parsing
  976. }
  977. else {
  978. gcode_line_error(PSTR(MSG_ERR_NO_CHECKSUM));
  979. return;
  980. }
  981. gcode_LastN = gcode_N;
  982. // if no errors, continue parsing
  983. }
  984. else if (apos) { // No '*' without 'N'
  985. gcode_line_error(PSTR(MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM), false);
  986. return;
  987. }
  988. // Movement commands alert when stopped
  989. if (IsStopped()) {
  990. char* gpos = strchr(command, 'G');
  991. if (gpos) {
  992. int codenum = strtol(gpos + 1, NULL, 10);
  993. switch (codenum) {
  994. case 0:
  995. case 1:
  996. case 2:
  997. case 3:
  998. SERIAL_ERRORLNPGM(MSG_ERR_STOPPED);
  999. LCD_MESSAGEPGM(MSG_STOPPED);
  1000. break;
  1001. }
  1002. }
  1003. }
  1004. #if DISABLED(EMERGENCY_PARSER)
  1005. // If command was e-stop process now
  1006. if (strcmp(command, "M108") == 0) wait_for_heatup = false;
  1007. if (strcmp(command, "M112") == 0) kill(PSTR(MSG_KILLED));
  1008. if (strcmp(command, "M410") == 0) { quickstop_stepper(); }
  1009. #endif
  1010. #if defined(NO_TIMEOUTS) && NO_TIMEOUTS > 0
  1011. last_command_time = ms;
  1012. #endif
  1013. // Add the command to the queue
  1014. _enqueuecommand(serial_line_buffer, true);
  1015. }
  1016. else if (serial_count >= MAX_CMD_SIZE - 1) {
  1017. // Keep fetching, but ignore normal characters beyond the max length
  1018. // The command will be injected when EOL is reached
  1019. }
  1020. else if (serial_char == '\\') { // Handle escapes
  1021. if (MYSERIAL.available() > 0) {
  1022. // if we have one more character, copy it over
  1023. serial_char = MYSERIAL.read();
  1024. if (!serial_comment_mode) serial_line_buffer[serial_count++] = serial_char;
  1025. }
  1026. // otherwise do nothing
  1027. }
  1028. else { // it's not a newline, carriage return or escape char
  1029. if (serial_char == ';') serial_comment_mode = true;
  1030. if (!serial_comment_mode) serial_line_buffer[serial_count++] = serial_char;
  1031. }
  1032. } // queue has space, serial has data
  1033. }
  1034. #if ENABLED(SDSUPPORT)
  1035. inline void get_sdcard_commands() {
  1036. static bool stop_buffering = false,
  1037. sd_comment_mode = false;
  1038. if (!card.sdprinting) return;
  1039. /**
  1040. * '#' stops reading from SD to the buffer prematurely, so procedural
  1041. * macro calls are possible. If it occurs, stop_buffering is triggered
  1042. * and the buffer is run dry; this character _can_ occur in serial com
  1043. * due to checksums, however, no checksums are used in SD printing.
  1044. */
  1045. if (commands_in_queue == 0) stop_buffering = false;
  1046. uint16_t sd_count = 0;
  1047. bool card_eof = card.eof();
  1048. while (commands_in_queue < BUFSIZE && !card_eof && !stop_buffering) {
  1049. int16_t n = card.get();
  1050. char sd_char = (char)n;
  1051. card_eof = card.eof();
  1052. if (card_eof || n == -1
  1053. || sd_char == '\n' || sd_char == '\r'
  1054. || ((sd_char == '#' || sd_char == ':') && !sd_comment_mode)
  1055. ) {
  1056. if (card_eof) {
  1057. SERIAL_PROTOCOLLNPGM(MSG_FILE_PRINTED);
  1058. card.printingHasFinished();
  1059. card.checkautostart(true);
  1060. }
  1061. else if (n == -1) {
  1062. SERIAL_ERROR_START;
  1063. SERIAL_ECHOLNPGM(MSG_SD_ERR_READ);
  1064. }
  1065. if (sd_char == '#') stop_buffering = true;
  1066. sd_comment_mode = false; //for new command
  1067. if (!sd_count) continue; //skip empty lines
  1068. command_queue[cmd_queue_index_w][sd_count] = '\0'; //terminate string
  1069. sd_count = 0; //clear buffer
  1070. _commit_command(false);
  1071. }
  1072. else if (sd_count >= MAX_CMD_SIZE - 1) {
  1073. /**
  1074. * Keep fetching, but ignore normal characters beyond the max length
  1075. * The command will be injected when EOL is reached
  1076. */
  1077. }
  1078. else {
  1079. if (sd_char == ';') sd_comment_mode = true;
  1080. if (!sd_comment_mode) command_queue[cmd_queue_index_w][sd_count++] = sd_char;
  1081. }
  1082. }
  1083. }
  1084. #endif // SDSUPPORT
  1085. /**
  1086. * Add to the circular command queue the next command from:
  1087. * - The command-injection queue (queued_commands_P)
  1088. * - The active serial input (usually USB)
  1089. * - The SD card file being actively printed
  1090. */
  1091. void get_available_commands() {
  1092. // if any immediate commands remain, don't get other commands yet
  1093. if (drain_queued_commands_P()) return;
  1094. get_serial_commands();
  1095. #if ENABLED(SDSUPPORT)
  1096. get_sdcard_commands();
  1097. #endif
  1098. }
  1099. inline bool code_has_value() {
  1100. int i = 1;
  1101. char c = seen_pointer[i];
  1102. while (c == ' ') c = seen_pointer[++i];
  1103. if (c == '-' || c == '+') c = seen_pointer[++i];
  1104. if (c == '.') c = seen_pointer[++i];
  1105. return NUMERIC(c);
  1106. }
  1107. inline float code_value_float() {
  1108. float ret;
  1109. char* e = strchr(seen_pointer, 'E');
  1110. if (e) {
  1111. *e = 0;
  1112. ret = strtod(seen_pointer + 1, NULL);
  1113. *e = 'E';
  1114. }
  1115. else
  1116. ret = strtod(seen_pointer + 1, NULL);
  1117. return ret;
  1118. }
  1119. inline unsigned long code_value_ulong() { return strtoul(seen_pointer + 1, NULL, 10); }
  1120. inline long code_value_long() { return strtol(seen_pointer + 1, NULL, 10); }
  1121. inline int code_value_int() { return (int)strtol(seen_pointer + 1, NULL, 10); }
  1122. inline uint16_t code_value_ushort() { return (uint16_t)strtoul(seen_pointer + 1, NULL, 10); }
  1123. inline uint8_t code_value_byte() { return (uint8_t)(constrain(strtol(seen_pointer + 1, NULL, 10), 0, 255)); }
  1124. inline bool code_value_bool() { return code_value_byte() > 0; }
  1125. #if ENABLED(INCH_MODE_SUPPORT)
  1126. inline void set_input_linear_units(LinearUnit units) {
  1127. switch (units) {
  1128. case LINEARUNIT_INCH:
  1129. linear_unit_factor = 25.4;
  1130. break;
  1131. case LINEARUNIT_MM:
  1132. default:
  1133. linear_unit_factor = 1.0;
  1134. break;
  1135. }
  1136. volumetric_unit_factor = pow(linear_unit_factor, 3.0);
  1137. }
  1138. inline float axis_unit_factor(int axis) {
  1139. return (axis == E_AXIS && volumetric_enabled ? volumetric_unit_factor : linear_unit_factor);
  1140. }
  1141. inline float code_value_linear_units() { return code_value_float() * linear_unit_factor; }
  1142. inline float code_value_axis_units(int axis) { return code_value_float() * axis_unit_factor(axis); }
  1143. inline float code_value_per_axis_unit(int axis) { return code_value_float() / axis_unit_factor(axis); }
  1144. #else
  1145. inline float code_value_linear_units() { return code_value_float(); }
  1146. inline float code_value_axis_units(int axis) { UNUSED(axis); return code_value_float(); }
  1147. inline float code_value_per_axis_unit(int axis) { UNUSED(axis); return code_value_float(); }
  1148. #endif
  1149. #if ENABLED(TEMPERATURE_UNITS_SUPPORT)
  1150. inline void set_input_temp_units(TempUnit units) { input_temp_units = units; }
  1151. float code_value_temp_abs() {
  1152. switch (input_temp_units) {
  1153. case TEMPUNIT_C:
  1154. return code_value_float();
  1155. case TEMPUNIT_F:
  1156. return (code_value_float() - 32) * 0.5555555556;
  1157. case TEMPUNIT_K:
  1158. return code_value_float() - 272.15;
  1159. default:
  1160. return code_value_float();
  1161. }
  1162. }
  1163. float code_value_temp_diff() {
  1164. switch (input_temp_units) {
  1165. case TEMPUNIT_C:
  1166. case TEMPUNIT_K:
  1167. return code_value_float();
  1168. case TEMPUNIT_F:
  1169. return code_value_float() * 0.5555555556;
  1170. default:
  1171. return code_value_float();
  1172. }
  1173. }
  1174. #else
  1175. float code_value_temp_abs() { return code_value_float(); }
  1176. float code_value_temp_diff() { return code_value_float(); }
  1177. #endif
  1178. FORCE_INLINE millis_t code_value_millis() { return code_value_ulong(); }
  1179. inline millis_t code_value_millis_from_seconds() { return code_value_float() * 1000; }
  1180. bool code_seen(char code) {
  1181. seen_pointer = strchr(current_command_args, code);
  1182. return (seen_pointer != NULL); // Return TRUE if the code-letter was found
  1183. }
  1184. /**
  1185. * Set target_extruder from the T parameter or the active_extruder
  1186. *
  1187. * Returns TRUE if the target is invalid
  1188. */
  1189. bool get_target_extruder_from_command(int code) {
  1190. if (code_seen('T')) {
  1191. if (code_value_byte() >= EXTRUDERS) {
  1192. SERIAL_ECHO_START;
  1193. SERIAL_CHAR('M');
  1194. SERIAL_ECHO(code);
  1195. SERIAL_ECHOLNPAIR(" " MSG_INVALID_EXTRUDER " ", code_value_byte());
  1196. return true;
  1197. }
  1198. target_extruder = code_value_byte();
  1199. }
  1200. else
  1201. target_extruder = active_extruder;
  1202. return false;
  1203. }
  1204. #define DEFINE_PGM_READ_ANY(type, reader) \
  1205. static inline type pgm_read_any(const type *p) \
  1206. { return pgm_read_##reader##_near(p); }
  1207. DEFINE_PGM_READ_ANY(float, float);
  1208. DEFINE_PGM_READ_ANY(signed char, byte);
  1209. #define XYZ_CONSTS_FROM_CONFIG(type, array, CONFIG) \
  1210. static const PROGMEM type array##_P[XYZ] = \
  1211. { X_##CONFIG, Y_##CONFIG, Z_##CONFIG }; \
  1212. static inline type array(int axis) \
  1213. { return pgm_read_any(&array##_P[axis]); }
  1214. XYZ_CONSTS_FROM_CONFIG(float, base_min_pos, MIN_POS);
  1215. XYZ_CONSTS_FROM_CONFIG(float, base_max_pos, MAX_POS);
  1216. XYZ_CONSTS_FROM_CONFIG(float, base_home_pos, HOME_POS);
  1217. XYZ_CONSTS_FROM_CONFIG(float, max_length, MAX_LENGTH);
  1218. XYZ_CONSTS_FROM_CONFIG(float, home_bump_mm, HOME_BUMP_MM);
  1219. XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR);
  1220. #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
  1221. bool extruder_duplication_enabled = false; // Used in Dual X mode 2
  1222. #endif
  1223. #if ENABLED(DUAL_X_CARRIAGE)
  1224. #define DXC_FULL_CONTROL_MODE 0
  1225. #define DXC_AUTO_PARK_MODE 1
  1226. #define DXC_DUPLICATION_MODE 2
  1227. static int dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE;
  1228. static float x_home_pos(int extruder) {
  1229. if (extruder == 0)
  1230. return LOGICAL_X_POSITION(base_home_pos(X_AXIS));
  1231. else
  1232. /**
  1233. * In dual carriage mode the extruder offset provides an override of the
  1234. * second X-carriage offset when homed - otherwise X2_HOME_POS is used.
  1235. * This allow soft recalibration of the second extruder offset position
  1236. * without firmware reflash (through the M218 command).
  1237. */
  1238. return (hotend_offset[X_AXIS][1] > 0) ? hotend_offset[X_AXIS][1] : X2_HOME_POS;
  1239. }
  1240. static int x_home_dir(int extruder) {
  1241. return (extruder == 0) ? X_HOME_DIR : X2_HOME_DIR;
  1242. }
  1243. static float inactive_extruder_x_pos = X2_MAX_POS; // used in mode 0 & 1
  1244. static bool active_extruder_parked = false; // used in mode 1 & 2
  1245. static float raised_parked_position[NUM_AXIS]; // used in mode 1
  1246. static millis_t delayed_move_time = 0; // used in mode 1
  1247. static float duplicate_extruder_x_offset = DEFAULT_DUPLICATION_X_OFFSET; // used in mode 2
  1248. static float duplicate_extruder_temp_offset = 0; // used in mode 2
  1249. #endif //DUAL_X_CARRIAGE
  1250. /**
  1251. * Software endstops can be used to monitor the open end of
  1252. * an axis that has a hardware endstop on the other end. Or
  1253. * they can prevent axes from moving past endstops and grinding.
  1254. *
  1255. * To keep doing their job as the coordinate system changes,
  1256. * the software endstop positions must be refreshed to remain
  1257. * at the same positions relative to the machine.
  1258. */
  1259. void update_software_endstops(AxisEnum axis) {
  1260. float offs = LOGICAL_POSITION(0, axis);
  1261. #if ENABLED(DUAL_X_CARRIAGE)
  1262. if (axis == X_AXIS) {
  1263. float dual_max_x = max(hotend_offset[X_AXIS][1], X2_MAX_POS);
  1264. if (active_extruder != 0) {
  1265. soft_endstop_min[X_AXIS] = X2_MIN_POS + offs;
  1266. soft_endstop_max[X_AXIS] = dual_max_x + offs;
  1267. return;
  1268. }
  1269. else if (dual_x_carriage_mode == DXC_DUPLICATION_MODE) {
  1270. soft_endstop_min[X_AXIS] = base_min_pos(X_AXIS) + offs;
  1271. soft_endstop_max[X_AXIS] = min(base_max_pos(X_AXIS), dual_max_x - duplicate_extruder_x_offset) + offs;
  1272. return;
  1273. }
  1274. }
  1275. else
  1276. #endif
  1277. {
  1278. soft_endstop_min[axis] = base_min_pos(axis) + offs;
  1279. soft_endstop_max[axis] = base_max_pos(axis) + offs;
  1280. }
  1281. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1282. if (DEBUGGING(LEVELING)) {
  1283. SERIAL_ECHOPAIR("For ", axis_codes[axis]);
  1284. SERIAL_ECHOPAIR(" axis:\n home_offset = ", home_offset[axis]);
  1285. SERIAL_ECHOPAIR("\n position_shift = ", position_shift[axis]);
  1286. SERIAL_ECHOPAIR("\n soft_endstop_min = ", soft_endstop_min[axis]);
  1287. SERIAL_ECHOLNPAIR("\n soft_endstop_max = ", soft_endstop_max[axis]);
  1288. }
  1289. #endif
  1290. #if ENABLED(DELTA)
  1291. if (axis == Z_AXIS)
  1292. delta_clip_start_height = soft_endstop_max[axis] - delta_safe_distance_from_top();
  1293. #endif
  1294. }
  1295. /**
  1296. * Change the home offset for an axis, update the current
  1297. * position and the software endstops to retain the same
  1298. * relative distance to the new home.
  1299. *
  1300. * Since this changes the current_position, code should
  1301. * call sync_plan_position soon after this.
  1302. */
  1303. static void set_home_offset(AxisEnum axis, float v) {
  1304. current_position[axis] += v - home_offset[axis];
  1305. home_offset[axis] = v;
  1306. update_software_endstops(axis);
  1307. }
  1308. static void set_axis_is_at_home(AxisEnum axis) {
  1309. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1310. if (DEBUGGING(LEVELING)) {
  1311. SERIAL_ECHOPAIR(">>> set_axis_is_at_home(", axis_codes[axis]);
  1312. SERIAL_ECHOLNPGM(")");
  1313. }
  1314. #endif
  1315. position_shift[axis] = 0;
  1316. #if ENABLED(DUAL_X_CARRIAGE)
  1317. if (axis == X_AXIS && (active_extruder != 0 || dual_x_carriage_mode == DXC_DUPLICATION_MODE)) {
  1318. if (active_extruder != 0)
  1319. current_position[X_AXIS] = x_home_pos(active_extruder);
  1320. else
  1321. current_position[X_AXIS] = LOGICAL_X_POSITION(base_home_pos(X_AXIS));
  1322. update_software_endstops(X_AXIS);
  1323. return;
  1324. }
  1325. #endif
  1326. #if ENABLED(SCARA)
  1327. if (axis == X_AXIS || axis == Y_AXIS) {
  1328. float homeposition[XYZ];
  1329. LOOP_XYZ(i) homeposition[i] = LOGICAL_POSITION(base_home_pos(i), i);
  1330. // SERIAL_ECHOPGM("homeposition[x]= "); SERIAL_ECHO(homeposition[0]);
  1331. // SERIAL_ECHOPGM("homeposition[y]= "); SERIAL_ECHOLN(homeposition[1]);
  1332. /**
  1333. * Works out real Homeposition angles using inverse kinematics,
  1334. * and calculates homing offset using forward kinematics
  1335. */
  1336. inverse_kinematics(homeposition);
  1337. forward_kinematics_SCARA(delta);
  1338. // SERIAL_ECHOPAIR("Delta X=", delta[X_AXIS]);
  1339. // SERIAL_ECHOPGM(" Delta Y="); SERIAL_ECHOLN(delta[Y_AXIS]);
  1340. current_position[axis] = LOGICAL_POSITION(delta[axis], axis);
  1341. /**
  1342. * SCARA home positions are based on configuration since the actual
  1343. * limits are determined by the inverse kinematic transform.
  1344. */
  1345. soft_endstop_min[axis] = base_min_pos(axis); // + (delta[axis] - base_home_pos(axis));
  1346. soft_endstop_max[axis] = base_max_pos(axis); // + (delta[axis] - base_home_pos(axis));
  1347. }
  1348. else
  1349. #endif
  1350. {
  1351. current_position[axis] = LOGICAL_POSITION(base_home_pos(axis), axis);
  1352. update_software_endstops(axis);
  1353. if (axis == Z_AXIS) {
  1354. #if HAS_BED_PROBE && Z_HOME_DIR < 0
  1355. #if HOMING_Z_WITH_PROBE
  1356. current_position[Z_AXIS] -= zprobe_zoffset;
  1357. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1358. if (DEBUGGING(LEVELING)) {
  1359. SERIAL_ECHOLNPGM("*** Z HOMED WITH PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***");
  1360. SERIAL_ECHOLNPAIR("> zprobe_zoffset = ", zprobe_zoffset);
  1361. }
  1362. #endif
  1363. #elif ENABLED(DEBUG_LEVELING_FEATURE)
  1364. if (DEBUGGING(LEVELING))
  1365. SERIAL_ECHOLNPGM("*** Z HOMED TO ENDSTOP (Z_MIN_PROBE_ENDSTOP) ***");
  1366. #endif
  1367. #endif
  1368. }
  1369. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1370. if (DEBUGGING(LEVELING)) {
  1371. SERIAL_ECHOPAIR("> home_offset[", axis_codes[axis]);
  1372. SERIAL_ECHOLNPAIR("] = ", home_offset[axis]);
  1373. DEBUG_POS("", current_position);
  1374. }
  1375. #endif
  1376. }
  1377. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1378. if (DEBUGGING(LEVELING)) {
  1379. SERIAL_ECHOPAIR("<<< set_axis_is_at_home(", axis_codes[axis]);
  1380. SERIAL_ECHOLNPGM(")");
  1381. }
  1382. #endif
  1383. axis_known_position[axis] = axis_homed[axis] = true;
  1384. }
  1385. /**
  1386. * Some planner shorthand inline functions
  1387. */
  1388. inline float get_homing_bump_feedrate(AxisEnum axis) {
  1389. const int homing_bump_divisor[] = HOMING_BUMP_DIVISOR;
  1390. int hbd = homing_bump_divisor[axis];
  1391. if (hbd < 1) {
  1392. hbd = 10;
  1393. SERIAL_ECHO_START;
  1394. SERIAL_ECHOLNPGM("Warning: Homing Bump Divisor < 1");
  1395. }
  1396. return homing_feedrate_mm_s[axis] / hbd;
  1397. }
  1398. //
  1399. // line_to_current_position
  1400. // Move the planner to the current position from wherever it last moved
  1401. // (or from wherever it has been told it is located).
  1402. //
  1403. inline void line_to_current_position() {
  1404. planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate_mm_s, active_extruder);
  1405. }
  1406. inline void line_to_z(float zPosition) {
  1407. planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], zPosition, current_position[E_AXIS], feedrate_mm_s, active_extruder);
  1408. }
  1409. //
  1410. // line_to_destination
  1411. // Move the planner, not necessarily synced with current_position
  1412. //
  1413. inline void line_to_destination(float fr_mm_s) {
  1414. planner.buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], fr_mm_s, active_extruder);
  1415. }
  1416. inline void line_to_destination() { line_to_destination(feedrate_mm_s); }
  1417. inline void set_current_to_destination() { memcpy(current_position, destination, sizeof(current_position)); }
  1418. inline void set_destination_to_current() { memcpy(destination, current_position, sizeof(destination)); }
  1419. #if ENABLED(DELTA)
  1420. /**
  1421. * Calculate delta, start a line, and set current_position to destination
  1422. */
  1423. void prepare_move_to_destination_raw() {
  1424. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1425. if (DEBUGGING(LEVELING)) DEBUG_POS("prepare_move_to_destination_raw", destination);
  1426. #endif
  1427. refresh_cmd_timeout();
  1428. inverse_kinematics(destination);
  1429. planner.buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], destination[E_AXIS], MMS_SCALED(feedrate_mm_s), active_extruder);
  1430. set_current_to_destination();
  1431. }
  1432. #endif
  1433. /**
  1434. * Plan a move to (X, Y, Z) and set the current_position
  1435. * The final current_position may not be the one that was requested
  1436. */
  1437. void do_blocking_move_to(const float &x, const float &y, const float &z, const float &fr_mm_s /*=0.0*/) {
  1438. float old_feedrate_mm_s = feedrate_mm_s;
  1439. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1440. if (DEBUGGING(LEVELING)) print_xyz(PSTR(">>> do_blocking_move_to"), NULL, x, y, z);
  1441. #endif
  1442. #if ENABLED(DELTA)
  1443. feedrate_mm_s = (fr_mm_s != 0.0) ? fr_mm_s : XY_PROBE_FEEDRATE_MM_S;
  1444. set_destination_to_current(); // sync destination at the start
  1445. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1446. if (DEBUGGING(LEVELING)) DEBUG_POS("set_destination_to_current", destination);
  1447. #endif
  1448. // when in the danger zone
  1449. if (current_position[Z_AXIS] > delta_clip_start_height) {
  1450. if (z > delta_clip_start_height) { // staying in the danger zone
  1451. destination[X_AXIS] = x; // move directly (uninterpolated)
  1452. destination[Y_AXIS] = y;
  1453. destination[Z_AXIS] = z;
  1454. prepare_move_to_destination_raw(); // set_current_to_destination
  1455. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1456. if (DEBUGGING(LEVELING)) DEBUG_POS("danger zone move", current_position);
  1457. #endif
  1458. return;
  1459. }
  1460. else {
  1461. destination[Z_AXIS] = delta_clip_start_height;
  1462. prepare_move_to_destination_raw(); // set_current_to_destination
  1463. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1464. if (DEBUGGING(LEVELING)) DEBUG_POS("zone border move", current_position);
  1465. #endif
  1466. }
  1467. }
  1468. if (z > current_position[Z_AXIS]) { // raising?
  1469. destination[Z_AXIS] = z;
  1470. prepare_move_to_destination_raw(); // set_current_to_destination
  1471. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1472. if (DEBUGGING(LEVELING)) DEBUG_POS("z raise move", current_position);
  1473. #endif
  1474. }
  1475. destination[X_AXIS] = x;
  1476. destination[Y_AXIS] = y;
  1477. prepare_move_to_destination(); // set_current_to_destination
  1478. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1479. if (DEBUGGING(LEVELING)) DEBUG_POS("xy move", current_position);
  1480. #endif
  1481. if (z < current_position[Z_AXIS]) { // lowering?
  1482. destination[Z_AXIS] = z;
  1483. prepare_move_to_destination_raw(); // set_current_to_destination
  1484. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1485. if (DEBUGGING(LEVELING)) DEBUG_POS("z lower move", current_position);
  1486. #endif
  1487. }
  1488. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1489. if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< do_blocking_move_to");
  1490. #endif
  1491. #else
  1492. // If Z needs to raise, do it before moving XY
  1493. if (current_position[Z_AXIS] < z) {
  1494. feedrate_mm_s = (fr_mm_s != 0.0) ? fr_mm_s : homing_feedrate_mm_s[Z_AXIS];
  1495. current_position[Z_AXIS] = z;
  1496. line_to_current_position();
  1497. }
  1498. feedrate_mm_s = (fr_mm_s != 0.0) ? fr_mm_s : XY_PROBE_FEEDRATE_MM_S;
  1499. current_position[X_AXIS] = x;
  1500. current_position[Y_AXIS] = y;
  1501. line_to_current_position();
  1502. // If Z needs to lower, do it after moving XY
  1503. if (current_position[Z_AXIS] > z) {
  1504. feedrate_mm_s = (fr_mm_s != 0.0) ? fr_mm_s : homing_feedrate_mm_s[Z_AXIS];
  1505. current_position[Z_AXIS] = z;
  1506. line_to_current_position();
  1507. }
  1508. #endif
  1509. stepper.synchronize();
  1510. feedrate_mm_s = old_feedrate_mm_s;
  1511. }
  1512. void do_blocking_move_to_x(const float &x, const float &fr_mm_s/*=0.0*/) {
  1513. do_blocking_move_to(x, current_position[Y_AXIS], current_position[Z_AXIS], fr_mm_s);
  1514. }
  1515. void do_blocking_move_to_z(const float &z, const float &fr_mm_s/*=0.0*/) {
  1516. do_blocking_move_to(current_position[X_AXIS], current_position[Y_AXIS], z, fr_mm_s);
  1517. }
  1518. void do_blocking_move_to_xy(const float &x, const float &y, const float &fr_mm_s/*=0.0*/) {
  1519. do_blocking_move_to(x, y, current_position[Z_AXIS], fr_mm_s);
  1520. }
  1521. //
  1522. // Prepare to do endstop or probe moves
  1523. // with custom feedrates.
  1524. //
  1525. // - Save current feedrates
  1526. // - Reset the rate multiplier
  1527. // - Reset the command timeout
  1528. // - Enable the endstops (for endstop moves)
  1529. //
  1530. static void setup_for_endstop_or_probe_move() {
  1531. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1532. if (DEBUGGING(LEVELING)) DEBUG_POS("setup_for_endstop_or_probe_move", current_position);
  1533. #endif
  1534. saved_feedrate_mm_s = feedrate_mm_s;
  1535. saved_feedrate_percentage = feedrate_percentage;
  1536. feedrate_percentage = 100;
  1537. refresh_cmd_timeout();
  1538. }
  1539. static void clean_up_after_endstop_or_probe_move() {
  1540. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1541. if (DEBUGGING(LEVELING)) DEBUG_POS("clean_up_after_endstop_or_probe_move", current_position);
  1542. #endif
  1543. feedrate_mm_s = saved_feedrate_mm_s;
  1544. feedrate_percentage = saved_feedrate_percentage;
  1545. refresh_cmd_timeout();
  1546. }
  1547. #if HAS_BED_PROBE
  1548. /**
  1549. * Raise Z to a minimum height to make room for a probe to move
  1550. */
  1551. inline void do_probe_raise(float z_raise) {
  1552. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1553. if (DEBUGGING(LEVELING)) {
  1554. SERIAL_ECHOPAIR("do_probe_raise(", z_raise);
  1555. SERIAL_ECHOLNPGM(")");
  1556. }
  1557. #endif
  1558. float z_dest = LOGICAL_Z_POSITION(z_raise);
  1559. if (z_dest > current_position[Z_AXIS])
  1560. do_blocking_move_to_z(z_dest);
  1561. }
  1562. #endif //HAS_BED_PROBE
  1563. #if ENABLED(Z_PROBE_ALLEN_KEY) || ENABLED(Z_PROBE_SLED) || ENABLED(Z_SAFE_HOMING) || HAS_PROBING_PROCEDURE || HOTENDS > 1 || ENABLED(NOZZLE_CLEAN_FEATURE) || ENABLED(NOZZLE_PARK_FEATURE)
  1564. static bool axis_unhomed_error(const bool x, const bool y, const bool z) {
  1565. const bool xx = x && !axis_homed[X_AXIS],
  1566. yy = y && !axis_homed[Y_AXIS],
  1567. zz = z && !axis_homed[Z_AXIS];
  1568. if (xx || yy || zz) {
  1569. SERIAL_ECHO_START;
  1570. SERIAL_ECHOPGM(MSG_HOME " ");
  1571. if (xx) SERIAL_ECHOPGM(MSG_X);
  1572. if (yy) SERIAL_ECHOPGM(MSG_Y);
  1573. if (zz) SERIAL_ECHOPGM(MSG_Z);
  1574. SERIAL_ECHOLNPGM(" " MSG_FIRST);
  1575. #if ENABLED(ULTRA_LCD)
  1576. char message[3 * (LCD_WIDTH) + 1] = ""; // worst case is kana.utf with up to 3*LCD_WIDTH+1
  1577. strcat_P(message, PSTR(MSG_HOME " "));
  1578. if (xx) strcat_P(message, PSTR(MSG_X));
  1579. if (yy) strcat_P(message, PSTR(MSG_Y));
  1580. if (zz) strcat_P(message, PSTR(MSG_Z));
  1581. strcat_P(message, PSTR(" " MSG_FIRST));
  1582. lcd_setstatus(message);
  1583. #endif
  1584. return true;
  1585. }
  1586. return false;
  1587. }
  1588. #endif
  1589. #if ENABLED(Z_PROBE_SLED)
  1590. #ifndef SLED_DOCKING_OFFSET
  1591. #define SLED_DOCKING_OFFSET 0
  1592. #endif
  1593. /**
  1594. * Method to dock/undock a sled designed by Charles Bell.
  1595. *
  1596. * stow[in] If false, move to MAX_X and engage the solenoid
  1597. * If true, move to MAX_X and release the solenoid
  1598. */
  1599. static void dock_sled(bool stow) {
  1600. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1601. if (DEBUGGING(LEVELING)) {
  1602. SERIAL_ECHOPAIR("dock_sled(", stow);
  1603. SERIAL_ECHOLNPGM(")");
  1604. }
  1605. #endif
  1606. // Dock sled a bit closer to ensure proper capturing
  1607. do_blocking_move_to_x(X_MAX_POS + SLED_DOCKING_OFFSET - ((stow) ? 1 : 0));
  1608. #if PIN_EXISTS(SLED)
  1609. digitalWrite(SLED_PIN, !stow); // switch solenoid
  1610. #endif
  1611. }
  1612. #endif // Z_PROBE_SLED
  1613. #if ENABLED(Z_PROBE_ALLEN_KEY)
  1614. void run_deploy_moves_script() {
  1615. #if defined(Z_PROBE_ALLEN_KEY_DEPLOY_1_X) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_1_Y) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_1_Z)
  1616. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_1_X
  1617. #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X current_position[X_AXIS]
  1618. #endif
  1619. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_1_Y
  1620. #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y current_position[Y_AXIS]
  1621. #endif
  1622. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_1_Z
  1623. #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z current_position[Z_AXIS]
  1624. #endif
  1625. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE
  1626. #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE 0.0
  1627. #endif
  1628. do_blocking_move_to(Z_PROBE_ALLEN_KEY_DEPLOY_1_X, Z_PROBE_ALLEN_KEY_DEPLOY_1_Y, Z_PROBE_ALLEN_KEY_DEPLOY_1_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE));
  1629. #endif
  1630. #if defined(Z_PROBE_ALLEN_KEY_DEPLOY_2_X) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_2_Y) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_2_Z)
  1631. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_2_X
  1632. #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X current_position[X_AXIS]
  1633. #endif
  1634. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_2_Y
  1635. #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y current_position[Y_AXIS]
  1636. #endif
  1637. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_2_Z
  1638. #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z current_position[Z_AXIS]
  1639. #endif
  1640. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE
  1641. #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE 0.0
  1642. #endif
  1643. do_blocking_move_to(Z_PROBE_ALLEN_KEY_DEPLOY_2_X, Z_PROBE_ALLEN_KEY_DEPLOY_2_Y, Z_PROBE_ALLEN_KEY_DEPLOY_2_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE));
  1644. #endif
  1645. #if defined(Z_PROBE_ALLEN_KEY_DEPLOY_3_X) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_3_Y) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_3_Z)
  1646. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_3_X
  1647. #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X current_position[X_AXIS]
  1648. #endif
  1649. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_3_Y
  1650. #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y current_position[Y_AXIS]
  1651. #endif
  1652. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_3_Z
  1653. #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z current_position[Z_AXIS]
  1654. #endif
  1655. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE
  1656. #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE 0.0
  1657. #endif
  1658. do_blocking_move_to(Z_PROBE_ALLEN_KEY_DEPLOY_3_X, Z_PROBE_ALLEN_KEY_DEPLOY_3_Y, Z_PROBE_ALLEN_KEY_DEPLOY_3_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE));
  1659. #endif
  1660. #if defined(Z_PROBE_ALLEN_KEY_DEPLOY_4_X) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_4_Y) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_4_Z)
  1661. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_4_X
  1662. #define Z_PROBE_ALLEN_KEY_DEPLOY_4_X current_position[X_AXIS]
  1663. #endif
  1664. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_4_Y
  1665. #define Z_PROBE_ALLEN_KEY_DEPLOY_4_Y current_position[Y_AXIS]
  1666. #endif
  1667. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_4_Z
  1668. #define Z_PROBE_ALLEN_KEY_DEPLOY_4_Z current_position[Z_AXIS]
  1669. #endif
  1670. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_4_FEEDRATE
  1671. #define Z_PROBE_ALLEN_KEY_DEPLOY_4_FEEDRATE 0.0
  1672. #endif
  1673. do_blocking_move_to(Z_PROBE_ALLEN_KEY_DEPLOY_4_X, Z_PROBE_ALLEN_KEY_DEPLOY_4_Y, Z_PROBE_ALLEN_KEY_DEPLOY_4_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_4_FEEDRATE));
  1674. #endif
  1675. #if defined(Z_PROBE_ALLEN_KEY_DEPLOY_5_X) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_5_Y) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_5_Z)
  1676. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_5_X
  1677. #define Z_PROBE_ALLEN_KEY_DEPLOY_5_X current_position[X_AXIS]
  1678. #endif
  1679. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_5_Y
  1680. #define Z_PROBE_ALLEN_KEY_DEPLOY_5_Y current_position[Y_AXIS]
  1681. #endif
  1682. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_5_Z
  1683. #define Z_PROBE_ALLEN_KEY_DEPLOY_5_Z current_position[Z_AXIS]
  1684. #endif
  1685. #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_5_FEEDRATE
  1686. #define Z_PROBE_ALLEN_KEY_DEPLOY_5_FEEDRATE 0.0
  1687. #endif
  1688. do_blocking_move_to(Z_PROBE_ALLEN_KEY_DEPLOY_5_X, Z_PROBE_ALLEN_KEY_DEPLOY_5_Y, Z_PROBE_ALLEN_KEY_DEPLOY_5_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_5_FEEDRATE));
  1689. #endif
  1690. }
  1691. void run_stow_moves_script() {
  1692. #if defined(Z_PROBE_ALLEN_KEY_STOW_1_X) || defined(Z_PROBE_ALLEN_KEY_STOW_1_Y) || defined(Z_PROBE_ALLEN_KEY_STOW_1_Z)
  1693. #ifndef Z_PROBE_ALLEN_KEY_STOW_1_X
  1694. #define Z_PROBE_ALLEN_KEY_STOW_1_X current_position[X_AXIS]
  1695. #endif
  1696. #ifndef Z_PROBE_ALLEN_KEY_STOW_1_Y
  1697. #define Z_PROBE_ALLEN_KEY_STOW_1_Y current_position[Y_AXIS]
  1698. #endif
  1699. #ifndef Z_PROBE_ALLEN_KEY_STOW_1_Z
  1700. #define Z_PROBE_ALLEN_KEY_STOW_1_Z current_position[Z_AXIS]
  1701. #endif
  1702. #ifndef Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE
  1703. #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE 0.0
  1704. #endif
  1705. do_blocking_move_to(Z_PROBE_ALLEN_KEY_STOW_1_X, Z_PROBE_ALLEN_KEY_STOW_1_Y, Z_PROBE_ALLEN_KEY_STOW_1_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE));
  1706. #endif
  1707. #if defined(Z_PROBE_ALLEN_KEY_STOW_2_X) || defined(Z_PROBE_ALLEN_KEY_STOW_2_Y) || defined(Z_PROBE_ALLEN_KEY_STOW_2_Z)
  1708. #ifndef Z_PROBE_ALLEN_KEY_STOW_2_X
  1709. #define Z_PROBE_ALLEN_KEY_STOW_2_X current_position[X_AXIS]
  1710. #endif
  1711. #ifndef Z_PROBE_ALLEN_KEY_STOW_2_Y
  1712. #define Z_PROBE_ALLEN_KEY_STOW_2_Y current_position[Y_AXIS]
  1713. #endif
  1714. #ifndef Z_PROBE_ALLEN_KEY_STOW_2_Z
  1715. #define Z_PROBE_ALLEN_KEY_STOW_2_Z current_position[Z_AXIS]
  1716. #endif
  1717. #ifndef Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE
  1718. #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE 0.0
  1719. #endif
  1720. do_blocking_move_to(Z_PROBE_ALLEN_KEY_STOW_2_X, Z_PROBE_ALLEN_KEY_STOW_2_Y, Z_PROBE_ALLEN_KEY_STOW_2_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE));
  1721. #endif
  1722. #if defined(Z_PROBE_ALLEN_KEY_STOW_3_X) || defined(Z_PROBE_ALLEN_KEY_STOW_3_Y) || defined(Z_PROBE_ALLEN_KEY_STOW_3_Z)
  1723. #ifndef Z_PROBE_ALLEN_KEY_STOW_3_X
  1724. #define Z_PROBE_ALLEN_KEY_STOW_3_X current_position[X_AXIS]
  1725. #endif
  1726. #ifndef Z_PROBE_ALLEN_KEY_STOW_3_Y
  1727. #define Z_PROBE_ALLEN_KEY_STOW_3_Y current_position[Y_AXIS]
  1728. #endif
  1729. #ifndef Z_PROBE_ALLEN_KEY_STOW_3_Z
  1730. #define Z_PROBE_ALLEN_KEY_STOW_3_Z current_position[Z_AXIS]
  1731. #endif
  1732. #ifndef Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE
  1733. #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE 0.0
  1734. #endif
  1735. do_blocking_move_to(Z_PROBE_ALLEN_KEY_STOW_3_X, Z_PROBE_ALLEN_KEY_STOW_3_Y, Z_PROBE_ALLEN_KEY_STOW_3_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE));
  1736. #endif
  1737. #if defined(Z_PROBE_ALLEN_KEY_STOW_4_X) || defined(Z_PROBE_ALLEN_KEY_STOW_4_Y) || defined(Z_PROBE_ALLEN_KEY_STOW_4_Z)
  1738. #ifndef Z_PROBE_ALLEN_KEY_STOW_4_X
  1739. #define Z_PROBE_ALLEN_KEY_STOW_4_X current_position[X_AXIS]
  1740. #endif
  1741. #ifndef Z_PROBE_ALLEN_KEY_STOW_4_Y
  1742. #define Z_PROBE_ALLEN_KEY_STOW_4_Y current_position[Y_AXIS]
  1743. #endif
  1744. #ifndef Z_PROBE_ALLEN_KEY_STOW_4_Z
  1745. #define Z_PROBE_ALLEN_KEY_STOW_4_Z current_position[Z_AXIS]
  1746. #endif
  1747. #ifndef Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE
  1748. #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE 0.0
  1749. #endif
  1750. do_blocking_move_to(Z_PROBE_ALLEN_KEY_STOW_4_X, Z_PROBE_ALLEN_KEY_STOW_4_Y, Z_PROBE_ALLEN_KEY_STOW_4_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE));
  1751. #endif
  1752. #if defined(Z_PROBE_ALLEN_KEY_STOW_5_X) || defined(Z_PROBE_ALLEN_KEY_STOW_5_Y) || defined(Z_PROBE_ALLEN_KEY_STOW_5_Z)
  1753. #ifndef Z_PROBE_ALLEN_KEY_STOW_5_X
  1754. #define Z_PROBE_ALLEN_KEY_STOW_5_X current_position[X_AXIS]
  1755. #endif
  1756. #ifndef Z_PROBE_ALLEN_KEY_STOW_5_Y
  1757. #define Z_PROBE_ALLEN_KEY_STOW_5_Y current_position[Y_AXIS]
  1758. #endif
  1759. #ifndef Z_PROBE_ALLEN_KEY_STOW_5_Z
  1760. #define Z_PROBE_ALLEN_KEY_STOW_5_Z current_position[Z_AXIS]
  1761. #endif
  1762. #ifndef Z_PROBE_ALLEN_KEY_STOW_5_FEEDRATE
  1763. #define Z_PROBE_ALLEN_KEY_STOW_5_FEEDRATE 0.0
  1764. #endif
  1765. do_blocking_move_to(Z_PROBE_ALLEN_KEY_STOW_5_X, Z_PROBE_ALLEN_KEY_STOW_5_Y, Z_PROBE_ALLEN_KEY_STOW_5_Z, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_5_FEEDRATE));
  1766. #endif
  1767. }
  1768. #endif
  1769. #if HAS_BED_PROBE
  1770. // TRIGGERED_WHEN_STOWED_TEST can easily be extended to servo probes, ... if needed.
  1771. #if ENABLED(PROBE_IS_TRIGGERED_WHEN_STOWED_TEST)
  1772. #if ENABLED(Z_MIN_PROBE_ENDSTOP)
  1773. #define _TRIGGERED_WHEN_STOWED_TEST (READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING)
  1774. #else
  1775. #define _TRIGGERED_WHEN_STOWED_TEST (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING)
  1776. #endif
  1777. #endif
  1778. #define DEPLOY_PROBE() set_probe_deployed(true)
  1779. #define STOW_PROBE() set_probe_deployed(false)
  1780. // returns false for ok and true for failure
  1781. static bool set_probe_deployed(bool deploy) {
  1782. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1783. if (DEBUGGING(LEVELING)) {
  1784. DEBUG_POS("set_probe_deployed", current_position);
  1785. SERIAL_ECHOLNPAIR("deploy: ", deploy);
  1786. }
  1787. #endif
  1788. if (endstops.z_probe_enabled == deploy) return false;
  1789. // Make room for probe
  1790. do_probe_raise(_Z_PROBE_DEPLOY_HEIGHT);
  1791. #if ENABLED(Z_PROBE_SLED)
  1792. if (axis_unhomed_error(true, false, false)) { stop(); return true; }
  1793. #elif ENABLED(Z_PROBE_ALLEN_KEY)
  1794. if (axis_unhomed_error(true, true, true )) { stop(); return true; }
  1795. #endif
  1796. float oldXpos = current_position[X_AXIS],
  1797. oldYpos = current_position[Y_AXIS];
  1798. #ifdef _TRIGGERED_WHEN_STOWED_TEST
  1799. // If endstop is already false, the Z probe is deployed
  1800. if (_TRIGGERED_WHEN_STOWED_TEST == deploy) { // closed after the probe specific actions.
  1801. // Would a goto be less ugly?
  1802. //while (!_TRIGGERED_WHEN_STOWED_TEST) idle(); // would offer the opportunity
  1803. // for a triggered when stowed manual probe.
  1804. if (!deploy) endstops.enable_z_probe(false); // Switch off triggered when stowed probes early
  1805. // otherwise an Allen-Key probe can't be stowed.
  1806. #endif
  1807. #if ENABLED(Z_PROBE_SLED)
  1808. dock_sled(!deploy);
  1809. #elif HAS_Z_SERVO_ENDSTOP
  1810. servo[Z_ENDSTOP_SERVO_NR].move(z_servo_angle[deploy ? 0 : 1]);
  1811. #elif ENABLED(Z_PROBE_ALLEN_KEY)
  1812. deploy ? run_deploy_moves_script() : run_stow_moves_script();
  1813. #endif
  1814. #ifdef _TRIGGERED_WHEN_STOWED_TEST
  1815. } // _TRIGGERED_WHEN_STOWED_TEST == deploy
  1816. if (_TRIGGERED_WHEN_STOWED_TEST == deploy) { // State hasn't changed?
  1817. if (IsRunning()) {
  1818. SERIAL_ERROR_START;
  1819. SERIAL_ERRORLNPGM("Z-Probe failed");
  1820. LCD_ALERTMESSAGEPGM("Err: ZPROBE");
  1821. }
  1822. stop();
  1823. return true;
  1824. } // _TRIGGERED_WHEN_STOWED_TEST == deploy
  1825. #endif
  1826. do_blocking_move_to(oldXpos, oldYpos, current_position[Z_AXIS]); // return to position before deploy
  1827. endstops.enable_z_probe(deploy);
  1828. return false;
  1829. }
  1830. static void do_probe_move(float z, float fr_mm_m) {
  1831. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1832. if (DEBUGGING(LEVELING)) DEBUG_POS(">>> do_probe_move", current_position);
  1833. #endif
  1834. // Move down until probe triggered
  1835. do_blocking_move_to_z(LOGICAL_Z_POSITION(z), MMM_TO_MMS(fr_mm_m));
  1836. // Clear endstop flags
  1837. endstops.hit_on_purpose();
  1838. // Get Z where the steppers were interrupted
  1839. set_current_from_steppers_for_axis(Z_AXIS);
  1840. // Tell the planner where we actually are
  1841. SYNC_PLAN_POSITION_KINEMATIC();
  1842. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1843. if (DEBUGGING(LEVELING)) DEBUG_POS("<<< do_probe_move", current_position);
  1844. #endif
  1845. }
  1846. // Do a single Z probe and return with current_position[Z_AXIS]
  1847. // at the height where the probe triggered.
  1848. static float run_z_probe() {
  1849. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1850. if (DEBUGGING(LEVELING)) DEBUG_POS(">>> run_z_probe", current_position);
  1851. #endif
  1852. // Prevent stepper_inactive_time from running out and EXTRUDER_RUNOUT_PREVENT from extruding
  1853. refresh_cmd_timeout();
  1854. #if ENABLED(AUTO_BED_LEVELING_FEATURE)
  1855. planner.bed_level_matrix.set_to_identity();
  1856. #endif
  1857. #if ENABLED(PROBE_DOUBLE_TOUCH)
  1858. // Do a first probe at the fast speed
  1859. do_probe_move(-(Z_MAX_LENGTH) - 10, Z_PROBE_SPEED_FAST);
  1860. // move up by the bump distance
  1861. do_blocking_move_to_z(current_position[Z_AXIS] + home_bump_mm(Z_AXIS), MMM_TO_MMS(Z_PROBE_SPEED_FAST));
  1862. #else
  1863. // If the nozzle is above the travel height then
  1864. // move down quickly before doing the slow probe
  1865. float z = LOGICAL_Z_POSITION(Z_PROBE_TRAVEL_HEIGHT);
  1866. if (z < current_position[Z_AXIS])
  1867. do_blocking_move_to_z(z, MMM_TO_MMS(Z_PROBE_SPEED_FAST));
  1868. #endif
  1869. // move down slowly to find bed
  1870. do_probe_move(-(Z_MAX_LENGTH) - 10, Z_PROBE_SPEED_SLOW);
  1871. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1872. if (DEBUGGING(LEVELING)) DEBUG_POS("<<< run_z_probe", current_position);
  1873. #endif
  1874. return current_position[Z_AXIS];
  1875. }
  1876. //
  1877. // - Move to the given XY
  1878. // - Deploy the probe, if not already deployed
  1879. // - Probe the bed, get the Z position
  1880. // - Depending on the 'stow' flag
  1881. // - Stow the probe, or
  1882. // - Raise to the BETWEEN height
  1883. // - Return the probed Z position
  1884. //
  1885. static float probe_pt(float x, float y, bool stow = true, int verbose_level = 1) {
  1886. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1887. if (DEBUGGING(LEVELING)) {
  1888. SERIAL_ECHOPAIR(">>> probe_pt(", x);
  1889. SERIAL_ECHOPAIR(", ", y);
  1890. SERIAL_ECHOPAIR(", ", stow ? "stow" : "no stow");
  1891. SERIAL_ECHOLNPGM(")");
  1892. DEBUG_POS("", current_position);
  1893. }
  1894. #endif
  1895. float old_feedrate_mm_s = feedrate_mm_s;
  1896. // Ensure a minimum height before moving the probe
  1897. do_probe_raise(Z_PROBE_TRAVEL_HEIGHT);
  1898. // Move to the XY where we shall probe
  1899. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1900. if (DEBUGGING(LEVELING)) {
  1901. SERIAL_ECHOPAIR("> do_blocking_move_to_xy(", x - (X_PROBE_OFFSET_FROM_EXTRUDER));
  1902. SERIAL_ECHOPAIR(", ", y - (Y_PROBE_OFFSET_FROM_EXTRUDER));
  1903. SERIAL_ECHOLNPGM(")");
  1904. }
  1905. #endif
  1906. feedrate_mm_s = XY_PROBE_FEEDRATE_MM_S;
  1907. do_blocking_move_to_xy(x - (X_PROBE_OFFSET_FROM_EXTRUDER), y - (Y_PROBE_OFFSET_FROM_EXTRUDER));
  1908. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1909. if (DEBUGGING(LEVELING)) SERIAL_ECHOPGM("> ");
  1910. #endif
  1911. if (DEPLOY_PROBE()) return NAN;
  1912. float measured_z = run_z_probe();
  1913. if (stow) {
  1914. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1915. if (DEBUGGING(LEVELING)) SERIAL_ECHOPGM("> ");
  1916. #endif
  1917. if (STOW_PROBE()) return NAN;
  1918. }
  1919. else {
  1920. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1921. if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("> do_probe_raise");
  1922. #endif
  1923. do_probe_raise(Z_PROBE_TRAVEL_HEIGHT);
  1924. }
  1925. if (verbose_level > 2) {
  1926. SERIAL_PROTOCOLPGM("Bed X: ");
  1927. SERIAL_PROTOCOL_F(x, 3);
  1928. SERIAL_PROTOCOLPGM(" Y: ");
  1929. SERIAL_PROTOCOL_F(y, 3);
  1930. SERIAL_PROTOCOLPGM(" Z: ");
  1931. SERIAL_PROTOCOL_F(measured_z, 3);
  1932. SERIAL_EOL;
  1933. }
  1934. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1935. if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< probe_pt");
  1936. #endif
  1937. feedrate_mm_s = old_feedrate_mm_s;
  1938. return measured_z;
  1939. }
  1940. #endif // HAS_BED_PROBE
  1941. #if ENABLED(AUTO_BED_LEVELING_FEATURE)
  1942. #if ENABLED(AUTO_BED_LEVELING_GRID)
  1943. #if DISABLED(DELTA)
  1944. static void set_bed_level_equation_lsq(double* plane_equation_coefficients) {
  1945. //planner.bed_level_matrix.debug("bed level before");
  1946. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1947. planner.bed_level_matrix.set_to_identity();
  1948. if (DEBUGGING(LEVELING)) {
  1949. vector_3 uncorrected_position = planner.adjusted_position();
  1950. DEBUG_POS(">>> set_bed_level_equation_lsq", uncorrected_position);
  1951. DEBUG_POS(">>> set_bed_level_equation_lsq", current_position);
  1952. }
  1953. #endif
  1954. vector_3 planeNormal = vector_3(-plane_equation_coefficients[0], -plane_equation_coefficients[1], 1);
  1955. planner.bed_level_matrix = matrix_3x3::create_look_at(planeNormal);
  1956. vector_3 corrected_position = planner.adjusted_position();
  1957. current_position[X_AXIS] = corrected_position.x;
  1958. current_position[Y_AXIS] = corrected_position.y;
  1959. current_position[Z_AXIS] = corrected_position.z;
  1960. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1961. if (DEBUGGING(LEVELING)) DEBUG_POS("<<< set_bed_level_equation_lsq", corrected_position);
  1962. #endif
  1963. SYNC_PLAN_POSITION_KINEMATIC();
  1964. }
  1965. #endif // !DELTA
  1966. #else // !AUTO_BED_LEVELING_GRID
  1967. static void set_bed_level_equation_3pts(float z_at_pt_1, float z_at_pt_2, float z_at_pt_3) {
  1968. planner.bed_level_matrix.set_to_identity();
  1969. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1970. if (DEBUGGING(LEVELING)) {
  1971. vector_3 uncorrected_position = planner.adjusted_position();
  1972. DEBUG_POS("set_bed_level_equation_3pts", uncorrected_position);
  1973. }
  1974. #endif
  1975. vector_3 pt1 = vector_3(ABL_PROBE_PT_1_X, ABL_PROBE_PT_1_Y, z_at_pt_1);
  1976. vector_3 pt2 = vector_3(ABL_PROBE_PT_2_X, ABL_PROBE_PT_2_Y, z_at_pt_2);
  1977. vector_3 pt3 = vector_3(ABL_PROBE_PT_3_X, ABL_PROBE_PT_3_Y, z_at_pt_3);
  1978. vector_3 planeNormal = vector_3::cross(pt1 - pt2, pt3 - pt2).get_normal();
  1979. if (planeNormal.z < 0) {
  1980. planeNormal.x = -planeNormal.x;
  1981. planeNormal.y = -planeNormal.y;
  1982. planeNormal.z = -planeNormal.z;
  1983. }
  1984. planner.bed_level_matrix = matrix_3x3::create_look_at(planeNormal);
  1985. vector_3 corrected_position = planner.adjusted_position();
  1986. current_position[X_AXIS] = corrected_position.x;
  1987. current_position[Y_AXIS] = corrected_position.y;
  1988. current_position[Z_AXIS] = corrected_position.z;
  1989. #if ENABLED(DEBUG_LEVELING_FEATURE)
  1990. if (DEBUGGING(LEVELING)) DEBUG_POS("set_bed_level_equation_3pts", corrected_position);
  1991. #endif
  1992. SYNC_PLAN_POSITION_KINEMATIC();
  1993. }
  1994. #endif // !AUTO_BED_LEVELING_GRID
  1995. #if ENABLED(DELTA)
  1996. /**
  1997. * All DELTA leveling in the Marlin uses NONLINEAR_BED_LEVELING
  1998. */
  1999. static void extrapolate_one_point(int x, int y, int xdir, int ydir) {
  2000. if (bed_level[x][y] != 0.0) {
  2001. return; // Don't overwrite good values.
  2002. }
  2003. float a = 2 * bed_level[x + xdir][y] - bed_level[x + xdir * 2][y]; // Left to right.
  2004. float b = 2 * bed_level[x][y + ydir] - bed_level[x][y + ydir * 2]; // Front to back.
  2005. float c = 2 * bed_level[x + xdir][y + ydir] - bed_level[x + xdir * 2][y + ydir * 2]; // Diagonal.
  2006. float median = c; // Median is robust (ignores outliers).
  2007. if (a < b) {
  2008. if (b < c) median = b;
  2009. if (c < a) median = a;
  2010. }
  2011. else { // b <= a
  2012. if (c < b) median = b;
  2013. if (a < c) median = a;
  2014. }
  2015. bed_level[x][y] = median;
  2016. }
  2017. /**
  2018. * Fill in the unprobed points (corners of circular print surface)
  2019. * using linear extrapolation, away from the center.
  2020. */
  2021. static void extrapolate_unprobed_bed_level() {
  2022. int half = (AUTO_BED_LEVELING_GRID_POINTS - 1) / 2;
  2023. for (int y = 0; y <= half; y++) {
  2024. for (int x = 0; x <= half; x++) {
  2025. if (x + y < 3) continue;
  2026. extrapolate_one_point(half - x, half - y, x > 1 ? +1 : 0, y > 1 ? +1 : 0);
  2027. extrapolate_one_point(half + x, half - y, x > 1 ? -1 : 0, y > 1 ? +1 : 0);
  2028. extrapolate_one_point(half - x, half + y, x > 1 ? +1 : 0, y > 1 ? -1 : 0);
  2029. extrapolate_one_point(half + x, half + y, x > 1 ? -1 : 0, y > 1 ? -1 : 0);
  2030. }
  2031. }
  2032. }
  2033. /**
  2034. * Print calibration results for plotting or manual frame adjustment.
  2035. */
  2036. static void print_bed_level() {
  2037. for (int y = 0; y < AUTO_BED_LEVELING_GRID_POINTS; y++) {
  2038. for (int x = 0; x < AUTO_BED_LEVELING_GRID_POINTS; x++) {
  2039. SERIAL_PROTOCOL_F(bed_level[x][y], 2);
  2040. SERIAL_PROTOCOLCHAR(' ');
  2041. }
  2042. SERIAL_EOL;
  2043. }
  2044. }
  2045. /**
  2046. * Reset calibration results to zero.
  2047. */
  2048. void reset_bed_level() {
  2049. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2050. if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("reset_bed_level");
  2051. #endif
  2052. for (int y = 0; y < AUTO_BED_LEVELING_GRID_POINTS; y++) {
  2053. for (int x = 0; x < AUTO_BED_LEVELING_GRID_POINTS; x++) {
  2054. bed_level[x][y] = 0.0;
  2055. }
  2056. }
  2057. }
  2058. #endif // DELTA
  2059. #endif // AUTO_BED_LEVELING_FEATURE
  2060. /**
  2061. * Home an individual axis
  2062. */
  2063. static void do_homing_move(AxisEnum axis, float where, float fr_mm_s = 0.0) {
  2064. current_position[axis] = 0;
  2065. sync_plan_position();
  2066. current_position[axis] = where;
  2067. planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], (fr_mm_s != 0.0) ? fr_mm_s : homing_feedrate_mm_s[axis], active_extruder);
  2068. stepper.synchronize();
  2069. endstops.hit_on_purpose();
  2070. }
  2071. #define HOMEAXIS(LETTER) homeaxis(LETTER##_AXIS)
  2072. static void homeaxis(AxisEnum axis) {
  2073. #define CAN_HOME(A) \
  2074. (axis == A##_AXIS && ((A##_MIN_PIN > -1 && A##_HOME_DIR < 0) || (A##_MAX_PIN > -1 && A##_HOME_DIR > 0)))
  2075. if (!CAN_HOME(X) && !CAN_HOME(Y) && !CAN_HOME(Z)) return;
  2076. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2077. if (DEBUGGING(LEVELING)) {
  2078. SERIAL_ECHOPAIR(">>> homeaxis(", axis_codes[axis]);
  2079. SERIAL_ECHOLNPGM(")");
  2080. }
  2081. #endif
  2082. int axis_home_dir =
  2083. #if ENABLED(DUAL_X_CARRIAGE)
  2084. (axis == X_AXIS) ? x_home_dir(active_extruder) :
  2085. #endif
  2086. home_dir(axis);
  2087. // Homing Z towards the bed? Deploy the Z probe or endstop.
  2088. #if HOMING_Z_WITH_PROBE
  2089. if (axis == Z_AXIS) {
  2090. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2091. if (DEBUGGING(LEVELING)) SERIAL_ECHOPGM("> ");
  2092. #endif
  2093. if (DEPLOY_PROBE()) return;
  2094. }
  2095. #endif
  2096. // Set a flag for Z motor locking
  2097. #if ENABLED(Z_DUAL_ENDSTOPS)
  2098. if (axis == Z_AXIS) stepper.set_homing_flag(true);
  2099. #endif
  2100. // Move towards the endstop until an endstop is triggered
  2101. do_homing_move(axis, 1.5 * max_length(axis) * axis_home_dir);
  2102. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2103. if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("> 1st Home ", current_position[axis]);
  2104. #endif
  2105. // Move away from the endstop by the axis HOME_BUMP_MM
  2106. do_homing_move(axis, -home_bump_mm(axis) * axis_home_dir);
  2107. // Move slowly towards the endstop until triggered
  2108. do_homing_move(axis, 2 * home_bump_mm(axis) * axis_home_dir, get_homing_bump_feedrate(axis));
  2109. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2110. if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("> 2nd Home ", current_position[axis]);
  2111. #endif
  2112. #if ENABLED(Z_DUAL_ENDSTOPS)
  2113. if (axis == Z_AXIS) {
  2114. float adj = fabs(z_endstop_adj);
  2115. bool lockZ1;
  2116. if (axis_home_dir > 0) {
  2117. adj = -adj;
  2118. lockZ1 = (z_endstop_adj > 0);
  2119. }
  2120. else
  2121. lockZ1 = (z_endstop_adj < 0);
  2122. if (lockZ1) stepper.set_z_lock(true); else stepper.set_z2_lock(true);
  2123. // Move to the adjusted endstop height
  2124. do_homing_move(axis, adj);
  2125. if (lockZ1) stepper.set_z_lock(false); else stepper.set_z2_lock(false);
  2126. stepper.set_homing_flag(false);
  2127. } // Z_AXIS
  2128. #endif
  2129. // Delta has already moved all three towers up in G28
  2130. // so here it re-homes each tower in turn.
  2131. // Delta homing treats the axes as normal linear axes.
  2132. #if ENABLED(DELTA)
  2133. // retrace by the amount specified in endstop_adj
  2134. if (endstop_adj[axis] * Z_HOME_DIR < 0) {
  2135. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2136. if (DEBUGGING(LEVELING)) {
  2137. SERIAL_ECHOPAIR("> endstop_adj = ", endstop_adj[axis] * Z_HOME_DIR);
  2138. DEBUG_POS("", current_position);
  2139. }
  2140. #endif
  2141. do_homing_move(axis, endstop_adj[axis]);
  2142. }
  2143. #else
  2144. // Set the axis position to its home position (plus home offsets)
  2145. set_axis_is_at_home(axis);
  2146. sync_plan_position();
  2147. destination[axis] = current_position[axis];
  2148. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2149. if (DEBUGGING(LEVELING)) DEBUG_POS("> AFTER set_axis_is_at_home", current_position);
  2150. #endif
  2151. #endif
  2152. // Put away the Z probe
  2153. #if HOMING_Z_WITH_PROBE
  2154. if (axis == Z_AXIS) {
  2155. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2156. if (DEBUGGING(LEVELING)) SERIAL_ECHOPGM("> ");
  2157. #endif
  2158. if (STOW_PROBE()) return;
  2159. }
  2160. #endif
  2161. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2162. if (DEBUGGING(LEVELING)) {
  2163. SERIAL_ECHOPAIR("<<< homeaxis(", axis_codes[axis]);
  2164. SERIAL_ECHOLNPGM(")");
  2165. }
  2166. #endif
  2167. } // homeaxis()
  2168. #if ENABLED(FWRETRACT)
  2169. void retract(bool retracting, bool swapping = false) {
  2170. if (retracting == retracted[active_extruder]) return;
  2171. float old_feedrate_mm_s = feedrate_mm_s;
  2172. set_destination_to_current();
  2173. if (retracting) {
  2174. feedrate_mm_s = retract_feedrate_mm_s;
  2175. current_position[E_AXIS] += (swapping ? retract_length_swap : retract_length) / volumetric_multiplier[active_extruder];
  2176. sync_plan_position_e();
  2177. prepare_move_to_destination();
  2178. if (retract_zlift > 0.01) {
  2179. current_position[Z_AXIS] -= retract_zlift;
  2180. SYNC_PLAN_POSITION_KINEMATIC();
  2181. prepare_move_to_destination();
  2182. }
  2183. }
  2184. else {
  2185. if (retract_zlift > 0.01) {
  2186. current_position[Z_AXIS] += retract_zlift;
  2187. SYNC_PLAN_POSITION_KINEMATIC();
  2188. }
  2189. feedrate_mm_s = retract_recover_feedrate_mm_s;
  2190. float move_e = swapping ? retract_length_swap + retract_recover_length_swap : retract_length + retract_recover_length;
  2191. current_position[E_AXIS] -= move_e / volumetric_multiplier[active_extruder];
  2192. sync_plan_position_e();
  2193. prepare_move_to_destination();
  2194. }
  2195. feedrate_mm_s = old_feedrate_mm_s;
  2196. retracted[active_extruder] = retracting;
  2197. } // retract()
  2198. #endif // FWRETRACT
  2199. #if ENABLED(MIXING_EXTRUDER)
  2200. void normalize_mix() {
  2201. float mix_total = 0.0;
  2202. for (int i = 0; i < MIXING_STEPPERS; i++) {
  2203. float v = mixing_factor[i];
  2204. if (v < 0) v = mixing_factor[i] = 0;
  2205. mix_total += v;
  2206. }
  2207. // Scale all values if they don't add up to ~1.0
  2208. if (mix_total < 0.9999 || mix_total > 1.0001) {
  2209. SERIAL_PROTOCOLLNPGM("Warning: Mix factors must add up to 1.0. Scaling.");
  2210. float mix_scale = 1.0 / mix_total;
  2211. for (int i = 0; i < MIXING_STEPPERS; i++)
  2212. mixing_factor[i] *= mix_scale;
  2213. }
  2214. }
  2215. #if ENABLED(DIRECT_MIXING_IN_G1)
  2216. // Get mixing parameters from the GCode
  2217. // Factors that are left out are set to 0
  2218. // The total "must" be 1.0 (but it will be normalized)
  2219. void gcode_get_mix() {
  2220. const char* mixing_codes = "ABCDHI";
  2221. for (int i = 0; i < MIXING_STEPPERS; i++)
  2222. mixing_factor[i] = code_seen(mixing_codes[i]) ? code_value_float() : 0;
  2223. normalize_mix();
  2224. }
  2225. #endif
  2226. #endif
  2227. /**
  2228. * ***************************************************************************
  2229. * ***************************** G-CODE HANDLING *****************************
  2230. * ***************************************************************************
  2231. */
  2232. /**
  2233. * Set XYZE destination and feedrate from the current GCode command
  2234. *
  2235. * - Set destination from included axis codes
  2236. * - Set to current for missing axis codes
  2237. * - Set the feedrate, if included
  2238. */
  2239. void gcode_get_destination() {
  2240. LOOP_XYZE(i) {
  2241. if (code_seen(axis_codes[i]))
  2242. destination[i] = code_value_axis_units(i) + (axis_relative_modes[i] || relative_mode ? current_position[i] : 0);
  2243. else
  2244. destination[i] = current_position[i];
  2245. }
  2246. if (code_seen('F') && code_value_linear_units() > 0.0)
  2247. feedrate_mm_s = MMM_TO_MMS(code_value_linear_units());
  2248. #if ENABLED(PRINTCOUNTER)
  2249. if (!DEBUGGING(DRYRUN))
  2250. print_job_timer.incFilamentUsed(destination[E_AXIS] - current_position[E_AXIS]);
  2251. #endif
  2252. // Get ABCDHI mixing factors
  2253. #if ENABLED(MIXING_EXTRUDER) && ENABLED(DIRECT_MIXING_IN_G1)
  2254. gcode_get_mix();
  2255. #endif
  2256. }
  2257. void unknown_command_error() {
  2258. SERIAL_ECHO_START;
  2259. SERIAL_ECHOPGM(MSG_UNKNOWN_COMMAND);
  2260. SERIAL_ECHO(current_command);
  2261. SERIAL_ECHOLNPGM("\"");
  2262. }
  2263. #if ENABLED(HOST_KEEPALIVE_FEATURE)
  2264. /**
  2265. * Output a "busy" message at regular intervals
  2266. * while the machine is not accepting commands.
  2267. */
  2268. void host_keepalive() {
  2269. millis_t ms = millis();
  2270. if (host_keepalive_interval && busy_state != NOT_BUSY) {
  2271. if (PENDING(ms, next_busy_signal_ms)) return;
  2272. switch (busy_state) {
  2273. case IN_HANDLER:
  2274. case IN_PROCESS:
  2275. SERIAL_ECHO_START;
  2276. SERIAL_ECHOLNPGM(MSG_BUSY_PROCESSING);
  2277. break;
  2278. case PAUSED_FOR_USER:
  2279. SERIAL_ECHO_START;
  2280. SERIAL_ECHOLNPGM(MSG_BUSY_PAUSED_FOR_USER);
  2281. break;
  2282. case PAUSED_FOR_INPUT:
  2283. SERIAL_ECHO_START;
  2284. SERIAL_ECHOLNPGM(MSG_BUSY_PAUSED_FOR_INPUT);
  2285. break;
  2286. default:
  2287. break;
  2288. }
  2289. }
  2290. next_busy_signal_ms = ms + host_keepalive_interval * 1000UL;
  2291. }
  2292. #endif //HOST_KEEPALIVE_FEATURE
  2293. /**
  2294. * G0, G1: Coordinated movement of X Y Z E axes
  2295. */
  2296. inline void gcode_G0_G1() {
  2297. if (IsRunning()) {
  2298. gcode_get_destination(); // For X Y Z E F
  2299. #if ENABLED(FWRETRACT)
  2300. if (autoretract_enabled && !(code_seen('X') || code_seen('Y') || code_seen('Z')) && code_seen('E')) {
  2301. float echange = destination[E_AXIS] - current_position[E_AXIS];
  2302. // Is this move an attempt to retract or recover?
  2303. if ((echange < -MIN_RETRACT && !retracted[active_extruder]) || (echange > MIN_RETRACT && retracted[active_extruder])) {
  2304. current_position[E_AXIS] = destination[E_AXIS]; // hide the slicer-generated retract/recover from calculations
  2305. sync_plan_position_e(); // AND from the planner
  2306. retract(!retracted[active_extruder]);
  2307. return;
  2308. }
  2309. }
  2310. #endif //FWRETRACT
  2311. prepare_move_to_destination();
  2312. }
  2313. }
  2314. /**
  2315. * G2: Clockwise Arc
  2316. * G3: Counterclockwise Arc
  2317. */
  2318. #if ENABLED(ARC_SUPPORT)
  2319. inline void gcode_G2_G3(bool clockwise) {
  2320. if (IsRunning()) {
  2321. #if ENABLED(SF_ARC_FIX)
  2322. bool relative_mode_backup = relative_mode;
  2323. relative_mode = true;
  2324. #endif
  2325. gcode_get_destination();
  2326. #if ENABLED(SF_ARC_FIX)
  2327. relative_mode = relative_mode_backup;
  2328. #endif
  2329. // Center of arc as offset from current_position
  2330. float arc_offset[2] = {
  2331. code_seen('I') ? code_value_axis_units(X_AXIS) : 0,
  2332. code_seen('J') ? code_value_axis_units(Y_AXIS) : 0
  2333. };
  2334. // Send an arc to the planner
  2335. plan_arc(destination, arc_offset, clockwise);
  2336. refresh_cmd_timeout();
  2337. }
  2338. }
  2339. #endif
  2340. /**
  2341. * G4: Dwell S<seconds> or P<milliseconds>
  2342. */
  2343. inline void gcode_G4() {
  2344. millis_t dwell_ms = 0;
  2345. if (code_seen('P')) dwell_ms = code_value_millis(); // milliseconds to wait
  2346. if (code_seen('S')) dwell_ms = code_value_millis_from_seconds(); // seconds to wait
  2347. stepper.synchronize();
  2348. refresh_cmd_timeout();
  2349. dwell_ms += previous_cmd_ms; // keep track of when we started waiting
  2350. if (!lcd_hasstatus()) LCD_MESSAGEPGM(MSG_DWELL);
  2351. while (PENDING(millis(), dwell_ms)) idle();
  2352. }
  2353. #if ENABLED(BEZIER_CURVE_SUPPORT)
  2354. /**
  2355. * Parameters interpreted according to:
  2356. * http://linuxcnc.org/docs/2.6/html/gcode/gcode.html#sec:G5-Cubic-Spline
  2357. * However I, J omission is not supported at this point; all
  2358. * parameters can be omitted and default to zero.
  2359. */
  2360. /**
  2361. * G5: Cubic B-spline
  2362. */
  2363. inline void gcode_G5() {
  2364. if (IsRunning()) {
  2365. gcode_get_destination();
  2366. float offset[] = {
  2367. code_seen('I') ? code_value_axis_units(X_AXIS) : 0.0,
  2368. code_seen('J') ? code_value_axis_units(Y_AXIS) : 0.0,
  2369. code_seen('P') ? code_value_axis_units(X_AXIS) : 0.0,
  2370. code_seen('Q') ? code_value_axis_units(Y_AXIS) : 0.0
  2371. };
  2372. plan_cubic_move(offset);
  2373. }
  2374. }
  2375. #endif // BEZIER_CURVE_SUPPORT
  2376. #if ENABLED(FWRETRACT)
  2377. /**
  2378. * G10 - Retract filament according to settings of M207
  2379. * G11 - Recover filament according to settings of M208
  2380. */
  2381. inline void gcode_G10_G11(bool doRetract=false) {
  2382. #if EXTRUDERS > 1
  2383. if (doRetract) {
  2384. retracted_swap[active_extruder] = (code_seen('S') && code_value_bool()); // checks for swap retract argument
  2385. }
  2386. #endif
  2387. retract(doRetract
  2388. #if EXTRUDERS > 1
  2389. , retracted_swap[active_extruder]
  2390. #endif
  2391. );
  2392. }
  2393. #endif //FWRETRACT
  2394. #if ENABLED(NOZZLE_CLEAN_FEATURE)
  2395. /**
  2396. * G12: Clean the nozzle
  2397. */
  2398. inline void gcode_G12() {
  2399. // Don't allow nozzle cleaning without homing first
  2400. if (axis_unhomed_error(true, true, true)) { return; }
  2401. uint8_t const pattern = code_seen('P') ? code_value_ushort() : 0;
  2402. uint8_t const strokes = code_seen('S') ? code_value_ushort() : NOZZLE_CLEAN_STROKES;
  2403. uint8_t const objects = code_seen('T') ? code_value_ushort() : 3;
  2404. Nozzle::clean(pattern, strokes, objects);
  2405. }
  2406. #endif
  2407. #if ENABLED(INCH_MODE_SUPPORT)
  2408. /**
  2409. * G20: Set input mode to inches
  2410. */
  2411. inline void gcode_G20() {
  2412. set_input_linear_units(LINEARUNIT_INCH);
  2413. }
  2414. /**
  2415. * G21: Set input mode to millimeters
  2416. */
  2417. inline void gcode_G21() {
  2418. set_input_linear_units(LINEARUNIT_MM);
  2419. }
  2420. #endif
  2421. #if ENABLED(NOZZLE_PARK_FEATURE)
  2422. /**
  2423. * G27: Park the nozzle
  2424. */
  2425. inline void gcode_G27() {
  2426. // Don't allow nozzle parking without homing first
  2427. if (axis_unhomed_error(true, true, true)) { return; }
  2428. uint8_t const z_action = code_seen('P') ? code_value_ushort() : 0;
  2429. Nozzle::park(z_action);
  2430. }
  2431. #endif // NOZZLE_PARK_FEATURE
  2432. #if ENABLED(QUICK_HOME)
  2433. static void quick_home_xy() {
  2434. // Pretend the current position is 0,0
  2435. current_position[X_AXIS] = current_position[Y_AXIS] = 0.0;
  2436. sync_plan_position();
  2437. int x_axis_home_dir =
  2438. #if ENABLED(DUAL_X_CARRIAGE)
  2439. x_home_dir(active_extruder)
  2440. #else
  2441. home_dir(X_AXIS)
  2442. #endif
  2443. ;
  2444. float mlx = max_length(X_AXIS),
  2445. mly = max_length(Y_AXIS),
  2446. mlratio = mlx > mly ? mly / mlx : mlx / mly,
  2447. fr_mm_s = min(homing_feedrate_mm_s[X_AXIS], homing_feedrate_mm_s[Y_AXIS]) * sqrt(sq(mlratio) + 1.0);
  2448. do_blocking_move_to_xy(1.5 * mlx * x_axis_home_dir, 1.5 * mly * home_dir(Y_AXIS), fr_mm_s);
  2449. endstops.hit_on_purpose(); // clear endstop hit flags
  2450. current_position[X_AXIS] = current_position[Y_AXIS] = 0.0;
  2451. }
  2452. #endif // QUICK_HOME
  2453. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2454. void log_machine_info() {
  2455. SERIAL_ECHOPGM("Machine Type: ");
  2456. #if ENABLED(DELTA)
  2457. SERIAL_ECHOLNPGM("Delta");
  2458. #elif ENABLED(SCARA)
  2459. SERIAL_ECHOLNPGM("SCARA");
  2460. #elif ENABLED(COREXY) || ENABLED(COREXZ) || ENABLED(COREYZ)
  2461. SERIAL_ECHOLNPGM("Core");
  2462. #else
  2463. SERIAL_ECHOLNPGM("Cartesian");
  2464. #endif
  2465. SERIAL_ECHOPGM("Probe: ");
  2466. #if ENABLED(FIX_MOUNTED_PROBE)
  2467. SERIAL_ECHOLNPGM("FIX_MOUNTED_PROBE");
  2468. #elif HAS_Z_SERVO_ENDSTOP
  2469. SERIAL_ECHOLNPGM("SERVO PROBE");
  2470. #elif ENABLED(BLTOUCH)
  2471. SERIAL_ECHOLNPGM("BLTOUCH");
  2472. #elif ENABLED(Z_PROBE_SLED)
  2473. SERIAL_ECHOLNPGM("Z_PROBE_SLED");
  2474. #elif ENABLED(Z_PROBE_ALLEN_KEY)
  2475. SERIAL_ECHOLNPGM("Z_PROBE_ALLEN_KEY");
  2476. #else
  2477. SERIAL_ECHOLNPGM("NONE");
  2478. #endif
  2479. #if HAS_BED_PROBE
  2480. SERIAL_ECHOPAIR("Probe Offset X:", X_PROBE_OFFSET_FROM_EXTRUDER);
  2481. SERIAL_ECHOPAIR(" Y:", Y_PROBE_OFFSET_FROM_EXTRUDER);
  2482. SERIAL_ECHOPAIR(" Z:", zprobe_zoffset);
  2483. #if (X_PROBE_OFFSET_FROM_EXTRUDER > 0)
  2484. SERIAL_ECHOPGM(" (Right");
  2485. #elif (X_PROBE_OFFSET_FROM_EXTRUDER < 0)
  2486. SERIAL_ECHOPGM(" (Left");
  2487. #endif
  2488. #if (Y_PROBE_OFFSET_FROM_EXTRUDER > 0)
  2489. SERIAL_ECHOPGM("-Back");
  2490. #elif (Y_PROBE_OFFSET_FROM_EXTRUDER < 0)
  2491. SERIAL_ECHOPGM("-Front");
  2492. #endif
  2493. if (zprobe_zoffset < 0)
  2494. SERIAL_ECHOPGM(" & Below");
  2495. else if (zprobe_zoffset > 0)
  2496. SERIAL_ECHOPGM(" & Above");
  2497. else
  2498. SERIAL_ECHOPGM(" & Same Z as");
  2499. SERIAL_ECHOLNPGM(" Nozzle)");
  2500. #endif
  2501. }
  2502. #endif // DEBUG_LEVELING_FEATURE
  2503. /**
  2504. * G28: Home all axes according to settings
  2505. *
  2506. * Parameters
  2507. *
  2508. * None Home to all axes with no parameters.
  2509. * With QUICK_HOME enabled XY will home together, then Z.
  2510. *
  2511. * Cartesian parameters
  2512. *
  2513. * X Home to the X endstop
  2514. * Y Home to the Y endstop
  2515. * Z Home to the Z endstop
  2516. *
  2517. */
  2518. inline void gcode_G28() {
  2519. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2520. if (DEBUGGING(LEVELING)) {
  2521. SERIAL_ECHOLNPGM(">>> gcode_G28");
  2522. log_machine_info();
  2523. }
  2524. #endif
  2525. // Wait for planner moves to finish!
  2526. stepper.synchronize();
  2527. // For auto bed leveling, clear the level matrix
  2528. #if ENABLED(AUTO_BED_LEVELING_FEATURE)
  2529. planner.bed_level_matrix.set_to_identity();
  2530. #if ENABLED(DELTA)
  2531. reset_bed_level();
  2532. #endif
  2533. #endif
  2534. // Always home with tool 0 active
  2535. #if HOTENDS > 1
  2536. uint8_t old_tool_index = active_extruder;
  2537. tool_change(0, 0, true);
  2538. #endif
  2539. #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
  2540. extruder_duplication_enabled = false;
  2541. #endif
  2542. /**
  2543. * For mesh bed leveling deactivate the mesh calculations, will be turned
  2544. * on again when homing all axis
  2545. */
  2546. #if ENABLED(MESH_BED_LEVELING)
  2547. float pre_home_z = MESH_HOME_SEARCH_Z;
  2548. if (mbl.active()) {
  2549. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2550. if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("MBL was active");
  2551. #endif
  2552. // Save known Z position if already homed
  2553. if (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS]) {
  2554. pre_home_z = current_position[Z_AXIS];
  2555. pre_home_z += mbl.get_z(RAW_CURRENT_POSITION(X_AXIS), RAW_CURRENT_POSITION(Y_AXIS));
  2556. }
  2557. mbl.set_active(false);
  2558. current_position[Z_AXIS] = pre_home_z;
  2559. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2560. if (DEBUGGING(LEVELING)) DEBUG_POS("Set Z to pre_home_z", current_position);
  2561. #endif
  2562. }
  2563. #endif
  2564. setup_for_endstop_or_probe_move();
  2565. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2566. if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("> endstops.enable(true)");
  2567. #endif
  2568. endstops.enable(true); // Enable endstops for next homing move
  2569. #if ENABLED(DELTA)
  2570. /**
  2571. * A delta can only safely home all axes at the same time
  2572. * This is like quick_home_xy() but for 3 towers.
  2573. */
  2574. // Init the current position of all carriages to 0,0,0
  2575. memset(current_position, 0, sizeof(current_position));
  2576. sync_plan_position();
  2577. // Move all carriages together linearly until an endstop is hit.
  2578. current_position[X_AXIS] = current_position[Y_AXIS] = current_position[Z_AXIS] = (Z_MAX_LENGTH + 10);
  2579. feedrate_mm_s = homing_feedrate_mm_s[X_AXIS];
  2580. line_to_current_position();
  2581. stepper.synchronize();
  2582. endstops.hit_on_purpose(); // clear endstop hit flags
  2583. // Probably not needed. Double-check this line:
  2584. memset(current_position, 0, sizeof(current_position));
  2585. // At least one carriage has reached the top.
  2586. // Now back off and re-home each carriage separately.
  2587. HOMEAXIS(A);
  2588. HOMEAXIS(B);
  2589. HOMEAXIS(C);
  2590. // Set all carriages to their home positions
  2591. // Do this here all at once for Delta, because
  2592. // XYZ isn't ABC. Applying this per-tower would
  2593. // give the impression that they are the same.
  2594. LOOP_XYZ(i) set_axis_is_at_home((AxisEnum)i);
  2595. SYNC_PLAN_POSITION_KINEMATIC();
  2596. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2597. if (DEBUGGING(LEVELING)) DEBUG_POS("(DELTA)", current_position);
  2598. #endif
  2599. #else // NOT DELTA
  2600. bool homeX = code_seen('X'), homeY = code_seen('Y'), homeZ = code_seen('Z');
  2601. home_all_axis = (!homeX && !homeY && !homeZ) || (homeX && homeY && homeZ);
  2602. set_destination_to_current();
  2603. #if Z_HOME_DIR > 0 // If homing away from BED do Z first
  2604. if (home_all_axis || homeZ) {
  2605. HOMEAXIS(Z);
  2606. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2607. if (DEBUGGING(LEVELING)) DEBUG_POS("> HOMEAXIS(Z)", current_position);
  2608. #endif
  2609. }
  2610. #else
  2611. if (home_all_axis || homeX || homeY) {
  2612. // Raise Z before homing any other axes and z is not already high enough (never lower z)
  2613. destination[Z_AXIS] = LOGICAL_Z_POSITION(Z_HOMING_HEIGHT);
  2614. if (destination[Z_AXIS] > current_position[Z_AXIS]) {
  2615. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2616. if (DEBUGGING(LEVELING))
  2617. SERIAL_ECHOLNPAIR("Raise Z (before homing) to ", destination[Z_AXIS]);
  2618. #endif
  2619. do_blocking_move_to_z(destination[Z_AXIS]);
  2620. }
  2621. }
  2622. #endif
  2623. #if ENABLED(QUICK_HOME)
  2624. if (home_all_axis || (homeX && homeY)) quick_home_xy();
  2625. #endif
  2626. #if ENABLED(HOME_Y_BEFORE_X)
  2627. // Home Y
  2628. if (home_all_axis || homeY) {
  2629. HOMEAXIS(Y);
  2630. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2631. if (DEBUGGING(LEVELING)) DEBUG_POS("> homeY", current_position);
  2632. #endif
  2633. }
  2634. #endif
  2635. // Home X
  2636. if (home_all_axis || homeX) {
  2637. #if ENABLED(DUAL_X_CARRIAGE)
  2638. int tmp_extruder = active_extruder;
  2639. active_extruder = !active_extruder;
  2640. HOMEAXIS(X);
  2641. inactive_extruder_x_pos = RAW_X_POSITION(current_position[X_AXIS]);
  2642. active_extruder = tmp_extruder;
  2643. HOMEAXIS(X);
  2644. // reset state used by the different modes
  2645. memcpy(raised_parked_position, current_position, sizeof(raised_parked_position));
  2646. delayed_move_time = 0;
  2647. active_extruder_parked = true;
  2648. #else
  2649. HOMEAXIS(X);
  2650. #endif
  2651. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2652. if (DEBUGGING(LEVELING)) DEBUG_POS("> homeX", current_position);
  2653. #endif
  2654. }
  2655. #if DISABLED(HOME_Y_BEFORE_X)
  2656. // Home Y
  2657. if (home_all_axis || homeY) {
  2658. HOMEAXIS(Y);
  2659. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2660. if (DEBUGGING(LEVELING)) DEBUG_POS("> homeY", current_position);
  2661. #endif
  2662. }
  2663. #endif
  2664. // Home Z last if homing towards the bed
  2665. #if Z_HOME_DIR < 0
  2666. if (home_all_axis || homeZ) {
  2667. #if ENABLED(Z_SAFE_HOMING)
  2668. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2669. if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("> Z_SAFE_HOMING >>>");
  2670. #endif
  2671. if (home_all_axis) {
  2672. /**
  2673. * At this point we already have Z at Z_HOMING_HEIGHT height
  2674. * No need to move Z any more as this height should already be safe
  2675. * enough to reach Z_SAFE_HOMING XY positions.
  2676. * Just make sure the planner is in sync.
  2677. */
  2678. SYNC_PLAN_POSITION_KINEMATIC();
  2679. /**
  2680. * Move the Z probe (or just the nozzle) to the safe homing point
  2681. */
  2682. destination[X_AXIS] = round(Z_SAFE_HOMING_X_POINT - (X_PROBE_OFFSET_FROM_EXTRUDER));
  2683. destination[Y_AXIS] = round(Z_SAFE_HOMING_Y_POINT - (Y_PROBE_OFFSET_FROM_EXTRUDER));
  2684. destination[Z_AXIS] = current_position[Z_AXIS]; // Z is already at the right height
  2685. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2686. if (DEBUGGING(LEVELING)) DEBUG_POS("> Z_SAFE_HOMING > home_all_axis", destination);
  2687. #endif
  2688. // Move in the XY plane
  2689. do_blocking_move_to_xy(destination[X_AXIS], destination[Y_AXIS]);
  2690. }
  2691. // Let's see if X and Y are homed
  2692. if (axis_unhomed_error(true, true, false)) return;
  2693. /**
  2694. * Make sure the Z probe is within the physical limits
  2695. * NOTE: This doesn't necessarily ensure the Z probe is also
  2696. * within the bed!
  2697. */
  2698. float cpx = RAW_CURRENT_POSITION(X_AXIS), cpy = RAW_CURRENT_POSITION(Y_AXIS);
  2699. if ( cpx >= X_MIN_POS - (X_PROBE_OFFSET_FROM_EXTRUDER)
  2700. && cpx <= X_MAX_POS - (X_PROBE_OFFSET_FROM_EXTRUDER)
  2701. && cpy >= Y_MIN_POS - (Y_PROBE_OFFSET_FROM_EXTRUDER)
  2702. && cpy <= Y_MAX_POS - (Y_PROBE_OFFSET_FROM_EXTRUDER)) {
  2703. // Home the Z axis
  2704. HOMEAXIS(Z);
  2705. }
  2706. else {
  2707. LCD_MESSAGEPGM(MSG_ZPROBE_OUT);
  2708. SERIAL_ECHO_START;
  2709. SERIAL_ECHOLNPGM(MSG_ZPROBE_OUT);
  2710. }
  2711. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2712. if (DEBUGGING(LEVELING)) {
  2713. SERIAL_ECHOLNPGM("<<< Z_SAFE_HOMING");
  2714. }
  2715. #endif
  2716. #else // !Z_SAFE_HOMING
  2717. HOMEAXIS(Z);
  2718. #endif // !Z_SAFE_HOMING
  2719. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2720. if (DEBUGGING(LEVELING)) DEBUG_POS("> (home_all_axis || homeZ) > final", current_position);
  2721. #endif
  2722. } // home_all_axis || homeZ
  2723. #endif // Z_HOME_DIR < 0
  2724. SYNC_PLAN_POSITION_KINEMATIC();
  2725. #endif // !DELTA (gcode_G28)
  2726. endstops.not_homing();
  2727. // Enable mesh leveling again
  2728. #if ENABLED(MESH_BED_LEVELING)
  2729. if (mbl.has_mesh()) {
  2730. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2731. if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("MBL has mesh");
  2732. #endif
  2733. if (home_all_axis || (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && homeZ)) {
  2734. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2735. if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("MBL Z homing");
  2736. #endif
  2737. current_position[Z_AXIS] = MESH_HOME_SEARCH_Z
  2738. #if Z_HOME_DIR > 0
  2739. + Z_MAX_POS
  2740. #endif
  2741. ;
  2742. SYNC_PLAN_POSITION_KINEMATIC();
  2743. mbl.set_active(true);
  2744. #if ENABLED(MESH_G28_REST_ORIGIN)
  2745. current_position[Z_AXIS] = 0.0;
  2746. set_destination_to_current();
  2747. feedrate_mm_s = homing_feedrate_mm_s[Z_AXIS];
  2748. line_to_destination();
  2749. stepper.synchronize();
  2750. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2751. if (DEBUGGING(LEVELING)) DEBUG_POS("MBL Rest Origin", current_position);
  2752. #endif
  2753. #else
  2754. current_position[Z_AXIS] = MESH_HOME_SEARCH_Z -
  2755. mbl.get_z(RAW_CURRENT_POSITION(X_AXIS), RAW_CURRENT_POSITION(Y_AXIS))
  2756. #if Z_HOME_DIR > 0
  2757. + Z_MAX_POS
  2758. #endif
  2759. ;
  2760. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2761. if (DEBUGGING(LEVELING)) DEBUG_POS("MBL adjusted MESH_HOME_SEARCH_Z", current_position);
  2762. #endif
  2763. #endif
  2764. }
  2765. else if ((axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS]) && (homeX || homeY)) {
  2766. current_position[Z_AXIS] = pre_home_z;
  2767. SYNC_PLAN_POSITION_KINEMATIC();
  2768. mbl.set_active(true);
  2769. current_position[Z_AXIS] = pre_home_z -
  2770. mbl.get_z(RAW_CURRENT_POSITION(X_AXIS), RAW_CURRENT_POSITION(Y_AXIS));
  2771. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2772. if (DEBUGGING(LEVELING)) DEBUG_POS("MBL Home X or Y", current_position);
  2773. #endif
  2774. }
  2775. }
  2776. #endif
  2777. #if ENABLED(DELTA)
  2778. // move to a height where we can use the full xy-area
  2779. do_blocking_move_to_z(delta_clip_start_height);
  2780. #endif
  2781. clean_up_after_endstop_or_probe_move();
  2782. #if ENABLED(DEBUG_LEVELING_FEATURE)
  2783. if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< gcode_G28");
  2784. #endif
  2785. // Restore the active tool after homing
  2786. #if HOTENDS > 1
  2787. tool_change(old_tool_index, 0, true);
  2788. #endif
  2789. report_current_position();
  2790. }
  2791. #if HAS_PROBING_PROCEDURE
  2792. void out_of_range_error(const char* p_edge) {
  2793. SERIAL_PROTOCOLPGM("?Probe ");
  2794. serialprintPGM(p_edge);
  2795. SERIAL_PROTOCOLLNPGM(" position out of range.");
  2796. }
  2797. #endif
  2798. #if ENABLED(MESH_BED_LEVELING)
  2799. inline void _mbl_goto_xy(float x, float y) {
  2800. float old_feedrate_mm_s = feedrate_mm_s;
  2801. feedrate_mm_s = homing_feedrate_mm_s[X_AXIS];
  2802. current_position[Z_AXIS] = MESH_HOME_SEARCH_Z
  2803. #if Z_PROBE_TRAVEL_HEIGHT > Z_HOMING_HEIGHT
  2804. + Z_PROBE_TRAVEL_HEIGHT
  2805. #elif Z_HOMING_HEIGHT > 0
  2806. + Z_HOMING_HEIGHT
  2807. #endif
  2808. ;
  2809. line_to_current_position();
  2810. current_position[X_AXIS] = LOGICAL_X_POSITION(x);
  2811. current_position[Y_AXIS] = LOGICAL_Y_POSITION(y);
  2812. line_to_current_position();
  2813. #if Z_PROBE_TRAVEL_HEIGHT > 0 || Z_HOMING_HEIGHT > 0
  2814. current_position[Z_AXIS] = LOGICAL_Z_POSITION(MESH_HOME_SEARCH_Z);
  2815. line_to_current_position();
  2816. #endif
  2817. feedrate_mm_s = old_feedrate_mm_s;
  2818. stepper.synchronize();
  2819. }
  2820. /**
  2821. * G29: Mesh-based Z probe, probes a grid and produces a
  2822. * mesh to compensate for variable bed height
  2823. *
  2824. * Parameters With MESH_BED_LEVELING:
  2825. *
  2826. * S0 Produce a mesh report
  2827. * S1 Start probing mesh points
  2828. * S2 Probe the next mesh point
  2829. * S3 Xn Yn Zn.nn Manually modify a single point
  2830. * S4 Zn.nn Set z offset. Positive away from bed, negative closer to bed.
  2831. * S5 Reset and disable mesh
  2832. *
  2833. * The S0 report the points as below
  2834. *
  2835. * +----> X-axis 1-n
  2836. * |
  2837. * |
  2838. * v Y-axis 1-n
  2839. *
  2840. */
  2841. inline void gcode_G29() {
  2842. static int probe_point = -1;
  2843. MeshLevelingState state = code_seen('S') ? (MeshLevelingState)code_value_byte() : MeshReport;
  2844. if (state < 0 || state > 5) {
  2845. SERIAL_PROTOCOLLNPGM("S out of range (0-5).");
  2846. return;
  2847. }
  2848. int8_t px, py;
  2849. switch (state) {
  2850. case MeshReport:
  2851. if (mbl.has_mesh()) {
  2852. SERIAL_PROTOCOLPAIR("State: ", mbl.active() ? MSG_ON : MSG_OFF);
  2853. SERIAL_PROTOCOLLNPGM("\nNum X,Y: " STRINGIFY(MESH_NUM_X_POINTS) "," STRINGIFY(MESH_NUM_Y_POINTS));
  2854. SERIAL_PROTOCOLLNPGM("Z search height: " STRINGIFY(MESH_HOME_SEARCH_Z));
  2855. SERIAL_PROTOCOLPGM("Z offset: "); SERIAL_PROTOCOL_F(mbl.z_offset, 5);
  2856. SERIAL_PROTOCOLLNPGM("\nMeasured points:");
  2857. for (py = 0; py < MESH_NUM_Y_POINTS; py++) {
  2858. for (px = 0; px < MESH_NUM_X_POINTS; px++) {
  2859. SERIAL_PROTOCOLPGM(" ");
  2860. SERIAL_PROTOCOL_F(mbl.z_values[py][px], 5);
  2861. }
  2862. SERIAL_EOL;
  2863. }
  2864. }
  2865. else
  2866. SERIAL_PROTOCOLLNPGM("Mesh bed leveling not active.");
  2867. break;
  2868. case MeshStart:
  2869. mbl.reset();
  2870. probe_point = 0;
  2871. enqueue_and_echo_commands_P(PSTR("G28\nG29 S2"));
  2872. break;
  2873. case MeshNext:
  2874. if (probe_point < 0) {
  2875. SERIAL_PROTOCOLLNPGM("Start mesh probing with \"G29 S1\" first.");
  2876. return;
  2877. }
  2878. // For each G29 S2...
  2879. if (probe_point == 0) {
  2880. // For the initial G29 S2 make Z a positive value (e.g., 4.0)
  2881. current_position[Z_AXIS] = MESH_HOME_SEARCH_Z
  2882. #if Z_HOME_DIR > 0
  2883. + Z_MAX_POS
  2884. #endif
  2885. ;
  2886. SYNC_PLAN_POSITION_KINEMATIC();
  2887. }
  2888. else {
  2889. // For G29 S2 after adjusting Z.
  2890. mbl.set_zigzag_z(probe_point - 1, current_position[Z_AXIS]);
  2891. }
  2892. // If there's another point to sample, move there with optional lift.
  2893. if (probe_point < (MESH_NUM_X_POINTS) * (MESH_NUM_Y_POINTS)) {
  2894. mbl.zigzag(probe_point, px, py);
  2895. _mbl_goto_xy(mbl.get_probe_x(px), mbl.get_probe_y(py));
  2896. probe_point++;
  2897. }
  2898. else {
  2899. // One last "return to the bed" (as originally coded) at completion
  2900. current_position[Z_AXIS] = MESH_HOME_SEARCH_Z
  2901. #if Z_PROBE_TRAVEL_HEIGHT > Z_HOMING_HEIGHT
  2902. + Z_PROBE_TRAVEL_HEIGHT
  2903. #elif Z_HOMING_HEIGHT > 0
  2904. + Z_HOMING_HEIGHT
  2905. #endif
  2906. ;
  2907. line_to_current_position();
  2908. stepper.synchronize();
  2909. // After recording the last point, activate the mbl and home
  2910. SERIAL_PROTOCOLLNPGM("Mesh probing done.");
  2911. probe_point = -1;
  2912. mbl.set_has_mesh(true);
  2913. enqueue_and_echo_commands_P(PSTR("G28"));
  2914. }
  2915. break;
  2916. case MeshSet:
  2917. if (code_seen('X')) {
  2918. px = code_value_int() - 1;
  2919. if (px < 0 || px >= MESH_NUM_X_POINTS) {
  2920. SERIAL_PROTOCOLLNPGM("X out of range (1-" STRINGIFY(MESH_NUM_X_POINTS) ").");
  2921. return;
  2922. }
  2923. }
  2924. else {
  2925. SERIAL_PROTOCOLLNPGM("X not entered.");
  2926. return;
  2927. }
  2928. if (code_seen('Y')) {
  2929. py = code_value_int() - 1;
  2930. if (py < 0 || py >= MESH_NUM_Y_POINTS) {
  2931. SERIAL_PROTOCOLLNPGM("Y out of range (1-" STRINGIFY(MESH_NUM_Y_POINTS) ").");
  2932. return;
  2933. }
  2934. }
  2935. else {
  2936. SERIAL_PROTOCOLLNPGM("Y not entered.");
  2937. return;
  2938. }
  2939. if (code_seen('Z')) {
  2940. mbl.z_values[py][px] = code_value_axis_units(Z_AXIS);
  2941. }
  2942. else {
  2943. SERIAL_PROTOCOLLNPGM("Z not entered.");
  2944. return;
  2945. }
  2946. break;
  2947. case MeshSetZOffset:
  2948. if (code_seen('Z')) {
  2949. mbl.z_offset = code_value_axis_units(Z_AXIS);
  2950. }
  2951. else {
  2952. SERIAL_PROTOCOLLNPGM("Z not entered.");
  2953. return;
  2954. }
  2955. break;
  2956. case MeshReset:
  2957. if (mbl.active()) {
  2958. current_position[Z_AXIS] +=
  2959. mbl.get_z(RAW_CURRENT_POSITION(X_AXIS), RAW_CURRENT_POSITION(Y_AXIS)) - MESH_HOME_SEARCH_Z;
  2960. mbl.reset();
  2961. SYNC_PLAN_POSITION_KINEMATIC();
  2962. }
  2963. else
  2964. mbl.reset();
  2965. } // switch(state)
  2966. report_current_position();
  2967. }
  2968. #elif ENABLED(AUTO_BED_LEVELING_FEATURE)
  2969. /**
  2970. * G29: Detailed Z probe, probes the bed at 3 or more points.
  2971. * Will fail if the printer has not been homed with G28.
  2972. *
  2973. * Enhanced G29 Auto Bed Leveling Probe Routine
  2974. *
  2975. * Parameters With AUTO_BED_LEVELING_GRID:
  2976. *
  2977. * P Set the size of the grid that will be probed (P x P points).
  2978. * Not supported by non-linear delta printer bed leveling.
  2979. * Example: "G29 P4"
  2980. *
  2981. * S Set the XY travel speed between probe points (in units/min)
  2982. *
  2983. * D Dry-Run mode. Just evaluate the bed Topology - Don't apply
  2984. * or clean the rotation Matrix. Useful to check the topology
  2985. * after a first run of G29.
  2986. *
  2987. * V Set the verbose level (0-4). Example: "G29 V3"
  2988. *
  2989. * T Generate a Bed Topology Report. Example: "G29 P5 T" for a detailed report.
  2990. * This is useful for manual bed leveling and finding flaws in the bed (to
  2991. * assist with part placement).
  2992. * Not supported by non-linear delta printer bed leveling.
  2993. *
  2994. * F Set the Front limit of the probing grid
  2995. * B Set the Back limit of the probing grid
  2996. * L Set the Left limit of the probing grid
  2997. * R Set the Right limit of the probing grid
  2998. *
  2999. * Global Parameters:
  3000. *
  3001. * E/e By default G29 will engage the Z probe, test the bed, then disengage.
  3002. * Include "E" to engage/disengage the Z probe for each sample.
  3003. * There's no extra effect if you have a fixed Z probe.
  3004. * Usage: "G29 E" or "G29 e"
  3005. *
  3006. */
  3007. inline void gcode_G29() {
  3008. #if ENABLED(DEBUG_LEVELING_FEATURE)
  3009. if (DEBUGGING(LEVELING)) {
  3010. SERIAL_ECHOLNPGM(">>> gcode_G29");
  3011. DEBUG_POS("", current_position);
  3012. log_machine_info();
  3013. }
  3014. #endif
  3015. // Don't allow auto-leveling without homing first
  3016. if (axis_unhomed_error(true, true, true)) return;
  3017. int verbose_level = code_seen('V') ? code_value_int() : 1;
  3018. if (verbose_level < 0 || verbose_level > 4) {
  3019. SERIAL_PROTOCOLLNPGM("?(V)erbose Level is implausible (0-4).");
  3020. return;
  3021. }
  3022. bool dryrun = code_seen('D');
  3023. bool stow_probe_after_each = code_seen('E');
  3024. #if ENABLED(AUTO_BED_LEVELING_GRID)
  3025. #if DISABLED(DELTA)
  3026. bool do_topography_map = verbose_level > 2 || code_seen('T');
  3027. #endif
  3028. if (verbose_level > 0) {
  3029. SERIAL_PROTOCOLLNPGM("G29 Auto Bed Leveling");
  3030. if (dryrun) SERIAL_PROTOCOLLNPGM("Running in DRY-RUN mode");
  3031. }
  3032. int auto_bed_leveling_grid_points = AUTO_BED_LEVELING_GRID_POINTS;
  3033. #if DISABLED(DELTA)
  3034. if (code_seen('P')) auto_bed_leveling_grid_points = code_value_int();
  3035. if (auto_bed_leveling_grid_points < 2) {
  3036. SERIAL_PROTOCOLLNPGM("?Number of probed (P)oints is implausible (2 minimum).");
  3037. return;
  3038. }
  3039. #endif
  3040. xy_probe_feedrate_mm_s = MMM_TO_MMS(code_seen('S') ? code_value_linear_units() : XY_PROBE_SPEED);
  3041. int left_probe_bed_position = code_seen('L') ? (int)code_value_axis_units(X_AXIS) : LOGICAL_X_POSITION(LEFT_PROBE_BED_POSITION),
  3042. right_probe_bed_position = code_seen('R') ? (int)code_value_axis_units(X_AXIS) : LOGICAL_X_POSITION(RIGHT_PROBE_BED_POSITION),
  3043. front_probe_bed_position = code_seen('F') ? (int)code_value_axis_units(Y_AXIS) : LOGICAL_Y_POSITION(FRONT_PROBE_BED_POSITION),
  3044. back_probe_bed_position = code_seen('B') ? (int)code_value_axis_units(Y_AXIS) : LOGICAL_Y_POSITION(BACK_PROBE_BED_POSITION);
  3045. bool left_out_l = left_probe_bed_position < LOGICAL_X_POSITION(MIN_PROBE_X),
  3046. left_out = left_out_l || left_probe_bed_position > right_probe_bed_position - (MIN_PROBE_EDGE),
  3047. right_out_r = right_probe_bed_position > LOGICAL_X_POSITION(MAX_PROBE_X),
  3048. right_out = right_out_r || right_probe_bed_position < left_probe_bed_position + MIN_PROBE_EDGE,
  3049. front_out_f = front_probe_bed_position < LOGICAL_Y_POSITION(MIN_PROBE_Y),
  3050. front_out = front_out_f || front_probe_bed_position > back_probe_bed_position - (MIN_PROBE_EDGE),
  3051. back_out_b = back_probe_bed_position > LOGICAL_Y_POSITION(MAX_PROBE_Y),
  3052. back_out = back_out_b || back_probe_bed_position < front_probe_bed_position + MIN_PROBE_EDGE;
  3053. if (left_out || right_out || front_out || back_out) {
  3054. if (left_out) {
  3055. out_of_range_error(PSTR("(L)eft"));
  3056. left_probe_bed_position = left_out_l ? LOGICAL_X_POSITION(MIN_PROBE_X) : right_probe_bed_position - (MIN_PROBE_EDGE);
  3057. }
  3058. if (right_out) {
  3059. out_of_range_error(PSTR("(R)ight"));
  3060. right_probe_bed_position = right_out_r ? LOGICAL_Y_POSITION(MAX_PROBE_X) : left_probe_bed_position + MIN_PROBE_EDGE;
  3061. }
  3062. if (front_out) {
  3063. out_of_range_error(PSTR("(F)ront"));
  3064. front_probe_bed_position = front_out_f ? LOGICAL_Y_POSITION(MIN_PROBE_Y) : back_probe_bed_position - (MIN_PROBE_EDGE);
  3065. }
  3066. if (back_out) {
  3067. out_of_range_error(PSTR("(B)ack"));
  3068. back_probe_bed_position = back_out_b ? LOGICAL_Y_POSITION(MAX_PROBE_Y) : front_probe_bed_position + MIN_PROBE_EDGE;
  3069. }
  3070. return;
  3071. }
  3072. #endif // AUTO_BED_LEVELING_GRID
  3073. if (!dryrun) {
  3074. #if ENABLED(DEBUG_LEVELING_FEATURE) && DISABLED(DELTA)
  3075. if (DEBUGGING(LEVELING)) {
  3076. vector_3 corrected_position = planner.adjusted_position();
  3077. DEBUG_POS("BEFORE matrix.set_to_identity", corrected_position);
  3078. DEBUG_POS("BEFORE matrix.set_to_identity", current_position);
  3079. }
  3080. #endif
  3081. // make sure the bed_level_rotation_matrix is identity or the planner will get it wrong
  3082. planner.bed_level_matrix.set_to_identity();
  3083. #if ENABLED(DELTA)
  3084. reset_bed_level();
  3085. #else //!DELTA
  3086. //vector_3 corrected_position = planner.adjusted_position();
  3087. //corrected_position.debug("position before G29");
  3088. vector_3 uncorrected_position = planner.adjusted_position();
  3089. //uncorrected_position.debug("position during G29");
  3090. current_position[X_AXIS] = uncorrected_position.x;
  3091. current_position[Y_AXIS] = uncorrected_position.y;
  3092. current_position[Z_AXIS] = uncorrected_position.z;
  3093. #if ENABLED(DEBUG_LEVELING_FEATURE)
  3094. if (DEBUGGING(LEVELING)) DEBUG_POS("AFTER matrix.set_to_identity", uncorrected_position);
  3095. #endif
  3096. SYNC_PLAN_POSITION_KINEMATIC();
  3097. #endif // !DELTA
  3098. }
  3099. stepper.synchronize();
  3100. setup_for_endstop_or_probe_move();
  3101. // Deploy the probe. Probe will raise if needed.
  3102. if (DEPLOY_PROBE()) return;
  3103. bed_leveling_in_progress = true;
  3104. #if ENABLED(AUTO_BED_LEVELING_GRID)
  3105. // probe at the points of a lattice grid
  3106. const float xGridSpacing = (right_probe_bed_position - left_probe_bed_position) / (auto_bed_leveling_grid_points - 1),
  3107. yGridSpacing = (back_probe_bed_position - front_probe_bed_position) / (auto_bed_leveling_grid_points - 1);
  3108. #if ENABLED(DELTA)
  3109. delta_grid_spacing[X_AXIS] = xGridSpacing;
  3110. delta_grid_spacing[Y_AXIS] = yGridSpacing;
  3111. float zoffset = zprobe_zoffset;
  3112. if (code_seen('Z')) zoffset += code_value_axis_units(Z_AXIS);
  3113. #else // !DELTA
  3114. /**
  3115. * solve the plane equation ax + by + d = z
  3116. * A is the matrix with rows [x y 1] for all the probed points
  3117. * B is the vector of the Z positions
  3118. * the normal vector to the plane is formed by the coefficients of the
  3119. * plane equation in the standard form, which is Vx*x+Vy*y+Vz*z+d = 0
  3120. * so Vx = -a Vy = -b Vz = 1 (we want the vector facing towards positive Z
  3121. */
  3122. int abl2 = sq(auto_bed_leveling_grid_points);
  3123. double eqnAMatrix[abl2 * 3], // "A" matrix of the linear system of equations
  3124. eqnBVector[abl2], // "B" vector of Z points
  3125. mean = 0.0;
  3126. int8_t indexIntoAB[auto_bed_leveling_grid_points][auto_bed_leveling_grid_points];
  3127. #endif // !DELTA
  3128. int probePointCounter = 0;
  3129. bool zig = auto_bed_leveling_grid_points & 1; //always end at [RIGHT_PROBE_BED_POSITION, BACK_PROBE_BED_POSITION]
  3130. for (int yCount = 0; yCount < auto_bed_leveling_grid_points; yCount++) {
  3131. float yBase = front_probe_bed_position + yGridSpacing * yCount,
  3132. yProbe = floor(yBase + (yBase < 0 ? 0 : 0.5));
  3133. int xStart, xStop, xInc;
  3134. if (zig) {
  3135. xStart = 0;
  3136. xStop = auto_bed_leveling_grid_points;
  3137. xInc = 1;
  3138. }
  3139. else {
  3140. xStart = auto_bed_leveling_grid_points - 1;
  3141. xStop = -1;
  3142. xInc = -1;
  3143. }
  3144. zig = !zig;
  3145. for (int xCount = xStart; xCount != xStop; xCount += xInc) {
  3146. float xBase = left_probe_bed_position + xGridSpacing * xCount,
  3147. xProbe = floor(xBase + (xBase < 0 ? 0 : 0.5));
  3148. #if ENABLED(DELTA)
  3149. // Avoid probing outside the round or hexagonal area of a delta printer
  3150. if (sq(xProbe) + sq(yProbe) > sq(DELTA_PROBEABLE_RADIUS) + 0.1) continue;
  3151. #endif
  3152. float measured_z = probe_pt(xProbe, yProbe, stow_probe_after_each, verbose_level);
  3153. #if DISABLED(DELTA)
  3154. mean += measured_z;
  3155. eqnBVector[probePointCounter] = measured_z;
  3156. eqnAMatrix[probePointCounter + 0 * abl2] = xProbe;
  3157. eqnAMatrix[probePointCounter + 1 * abl2] = yProbe;
  3158. eqnAMatrix[probePointCounter + 2 * abl2] = 1;
  3159. indexIntoAB[xCount][yCount] = probePointCounter;
  3160. #else
  3161. bed_level[xCount][yCount] = measured_z + zoffset;
  3162. #endif
  3163. probePointCounter++;
  3164. idle();
  3165. } //xProbe
  3166. } //yProbe
  3167. #else // !AUTO_BED_LEVELING_GRID
  3168. #if ENABLED(DEBUG_LEVELING_FEATURE)
  3169. if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("> 3-point Leveling");
  3170. #endif
  3171. // Probe at 3 arbitrary points
  3172. float z_at_pt_1 = probe_pt( LOGICAL_X_POSITION(ABL_PROBE_PT_1_X),
  3173. LOGICAL_Y_POSITION(ABL_PROBE_PT_1_Y),
  3174. stow_probe_after_each, verbose_level),
  3175. z_at_pt_2 = probe_pt( LOGICAL_X_POSITION(ABL_PROBE_PT_2_X),
  3176. LOGICAL_Y_POSITION(ABL_PROBE_PT_2_Y),
  3177. stow_probe_after_each, verbose_level),
  3178. z_at_pt_3 = probe_pt( LOGICAL_X_POSITION(ABL_PROBE_PT_3_X),
  3179. LOGICAL_Y_POSITION(ABL_PROBE_PT_3_Y),
  3180. stow_probe_after_each, verbose_level);
  3181. if (!dryrun) set_bed_level_equation_3pts(z_at_pt_1, z_at_pt_2, z_at_pt_3);
  3182. #endif // !AUTO_BED_LEVELING_GRID
  3183. // Raise to _Z_PROBE_DEPLOY_HEIGHT. Stow the probe.
  3184. if (STOW_PROBE()) return;
  3185. // Restore state after probing
  3186. clean_up_after_endstop_or_probe_move();
  3187. #if ENABLED(DEBUG_LEVELING_FEATURE)
  3188. if (DEBUGGING(LEVELING)) DEBUG_POS("> probing complete", current_position);
  3189. #endif
  3190. // Calculate leveling, print reports, correct the position
  3191. #if ENABLED(AUTO_BED_LEVELING_GRID)
  3192. #if ENABLED(DELTA)
  3193. if (!dryrun) extrapolate_unprobed_bed_level();
  3194. print_bed_level();
  3195. #else // !DELTA
  3196. // solve lsq problem
  3197. double plane_equation_coefficients[3];
  3198. qr_solve(plane_equation_coefficients, abl2, 3, eqnAMatrix, eqnBVector);
  3199. mean /= abl2;
  3200. if (verbose_level) {
  3201. SERIAL_PROTOCOLPGM("Eqn coefficients: a: ");
  3202. SERIAL_PROTOCOL_F(plane_equation_coefficients[0], 8);
  3203. SERIAL_PROTOCOLPGM(" b: ");
  3204. SERIAL_PROTOCOL_F(plane_equation_coefficients[1], 8);
  3205. SERIAL_PROTOCOLPGM(" d: ");
  3206. SERIAL_PROTOCOL_F(plane_equation_coefficients[2], 8);
  3207. SERIAL_EOL;
  3208. if (verbose_level > 2) {
  3209. SERIAL_PROTOCOLPGM("Mean of sampled points: ");
  3210. SERIAL_PROTOCOL_F(mean, 8);
  3211. SERIAL_EOL;
  3212. }
  3213. }
  3214. if (!dryrun) set_bed_level_equation_lsq(plane_equation_coefficients);
  3215. // Show the Topography map if enabled
  3216. if (do_topography_map) {
  3217. SERIAL_PROTOCOLLNPGM("\nBed Height Topography:\n"
  3218. " +--- BACK --+\n"
  3219. " | |\n"
  3220. " L | (+) | R\n"
  3221. " E | | I\n"
  3222. " F | (-) N (+) | G\n"
  3223. " T | | H\n"
  3224. " | (-) | T\n"
  3225. " | |\n"
  3226. " O-- FRONT --+\n"
  3227. " (0,0)");
  3228. float min_diff = 999;
  3229. for (int yy = auto_bed_leveling_grid_points - 1; yy >= 0; yy--) {
  3230. for (int xx = 0; xx < auto_bed_leveling_grid_points; xx++) {
  3231. int ind = indexIntoAB[xx][yy];
  3232. float diff = eqnBVector[ind] - mean;
  3233. float x_tmp = eqnAMatrix[ind + 0 * abl2],
  3234. y_tmp = eqnAMatrix[ind + 1 * abl2],
  3235. z_tmp = 0;
  3236. apply_rotation_xyz(planner.bed_level_matrix, x_tmp, y_tmp, z_tmp);
  3237. NOMORE(min_diff, eqnBVector[ind] - z_tmp);
  3238. if (diff >= 0.0)
  3239. SERIAL_PROTOCOLPGM(" +"); // Include + for column alignment
  3240. else
  3241. SERIAL_PROTOCOLCHAR(' ');
  3242. SERIAL_PROTOCOL_F(diff, 5);
  3243. } // xx
  3244. SERIAL_EOL;
  3245. } // yy
  3246. SERIAL_EOL;
  3247. if (verbose_level > 3) {
  3248. SERIAL_PROTOCOLLNPGM("\nCorrected Bed Height vs. Bed Topology:");
  3249. for (int yy = auto_bed_leveling_grid_points - 1; yy >= 0; yy--) {
  3250. for (int xx = 0; xx < auto_bed_leveling_grid_points; xx++) {
  3251. int ind = indexIntoAB[xx][yy];
  3252. float x_tmp = eqnAMatrix[ind + 0 * abl2],
  3253. y_tmp = eqnAMatrix[ind + 1 * abl2],
  3254. z_tmp = 0;
  3255. apply_rotation_xyz(planner.bed_level_matrix, x_tmp, y_tmp, z_tmp);
  3256. float diff = eqnBVector[ind] - z_tmp - min_diff;
  3257. if (diff >= 0.0)
  3258. SERIAL_PROTOCOLPGM(" +");
  3259. // Include + for column alignment
  3260. else
  3261. SERIAL_PROTOCOLCHAR(' ');
  3262. SERIAL_PROTOCOL_F(diff, 5);
  3263. } // xx
  3264. SERIAL_EOL;
  3265. } // yy
  3266. SERIAL_EOL;
  3267. }
  3268. } //do_topography_map
  3269. #endif //!DELTA
  3270. #endif // AUTO_BED_LEVELING_GRID
  3271. #if DISABLED(DELTA)
  3272. if (verbose_level > 0)
  3273. planner.bed_level_matrix.debug("\n\nBed Level Correction Matrix:");
  3274. if (!dryrun) {
  3275. /**
  3276. * Correct the Z height difference from Z probe position and nozzle tip position.
  3277. * The Z height on homing is measured by Z probe, but the Z probe is quite far
  3278. * from the nozzle. When the bed is uneven, this height must be corrected.
  3279. */
  3280. float x_tmp = current_position[X_AXIS] + X_PROBE_OFFSET_FROM_EXTRUDER,
  3281. y_tmp = current_position[Y_AXIS] + Y_PROBE_OFFSET_FROM_EXTRUDER,
  3282. z_tmp = current_position[Z_AXIS],
  3283. stepper_z = stepper.get_axis_position_mm(Z_AXIS); //get the real Z (since planner.adjusted_position is now correcting the plane)
  3284. #if ENABLED(DEBUG_LEVELING_FEATURE)
  3285. if (DEBUGGING(LEVELING)) {
  3286. SERIAL_ECHOPAIR("> BEFORE apply_rotation_xyz > stepper_z = ", stepper_z);
  3287. SERIAL_ECHOLNPAIR(" ... z_tmp = ", z_tmp);
  3288. }
  3289. #endif
  3290. // Apply the correction sending the Z probe offset
  3291. apply_rotation_xyz(planner.bed_level_matrix, x_tmp, y_tmp, z_tmp);
  3292. #if ENABLED(DEBUG_LEVELING_FEATURE)
  3293. if (DEBUGGING(LEVELING))
  3294. SERIAL_ECHOLNPAIR("> AFTER apply_rotation_xyz > z_tmp = ", z_tmp);
  3295. #endif
  3296. // Adjust the current Z and send it to the planner.
  3297. current_position[Z_AXIS] += z_tmp - stepper_z;
  3298. SYNC_PLAN_POSITION_KINEMATIC();
  3299. #if ENABLED(DEBUG_LEVELING_FEATURE)
  3300. if (DEBUGGING(LEVELING)) DEBUG_POS("> corrected Z in G29", current_position);
  3301. #endif
  3302. }
  3303. #endif // !DELTA
  3304. #ifdef Z_PROBE_END_SCRIPT
  3305. #if ENABLED(DEBUG_LEVELING_FEATURE)
  3306. if (DEBUGGING(LEVELING)) {
  3307. SERIAL_ECHOPGM("Z Probe End Script: ");
  3308. SERIAL_ECHOLNPGM(Z_PROBE_END_SCRIPT);
  3309. }
  3310. #endif
  3311. enqueue_and_echo_commands_P(PSTR(Z_PROBE_END_SCRIPT));
  3312. stepper.synchronize();
  3313. #endif
  3314. #if ENABLED(DEBUG_LEVELING_FEATURE)
  3315. if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< gcode_G29");
  3316. #endif
  3317. bed_leveling_in_progress = false;
  3318. report_current_position();
  3319. KEEPALIVE_STATE(IN_HANDLER);
  3320. }
  3321. #endif //AUTO_BED_LEVELING_FEATURE
  3322. #if HAS_BED_PROBE
  3323. /**
  3324. * G30: Do a single Z probe at the current XY
  3325. */
  3326. inline void gcode_G30() {
  3327. setup_for_endstop_or_probe_move();
  3328. // TODO: clear the leveling matrix or the planner will be set incorrectly
  3329. float measured_z = probe_pt(current_position[X_AXIS] + X_PROBE_OFFSET_FROM_EXTRUDER,
  3330. current_position[Y_AXIS] + Y_PROBE_OFFSET_FROM_EXTRUDER,
  3331. true, 1);
  3332. SERIAL_PROTOCOLPGM("Bed X: ");
  3333. SERIAL_PROTOCOL(current_position[X_AXIS] + X_PROBE_OFFSET_FROM_EXTRUDER + 0.0001);
  3334. SERIAL_PROTOCOLPGM(" Y: ");
  3335. SERIAL_PROTOCOL(current_position[Y_AXIS] + Y_PROBE_OFFSET_FROM_EXTRUDER + 0.0001);
  3336. SERIAL_PROTOCOLPGM(" Z: ");
  3337. SERIAL_PROTOCOL(measured_z + 0.0001);
  3338. SERIAL_EOL;
  3339. clean_up_after_endstop_or_probe_move();
  3340. report_current_position();
  3341. }
  3342. #if ENABLED(Z_PROBE_SLED)
  3343. /**
  3344. * G31: Deploy the Z probe
  3345. */
  3346. inline void gcode_G31() { DEPLOY_PROBE(); }
  3347. /**
  3348. * G32: Stow the Z probe
  3349. */
  3350. inline void gcode_G32() { STOW_PROBE(); }
  3351. #endif // Z_PROBE_SLED
  3352. #endif // HAS_BED_PROBE
  3353. /**
  3354. * G92: Set current position to given X Y Z E
  3355. */
  3356. inline void gcode_G92() {
  3357. bool didE = code_seen('E');
  3358. if (!didE) stepper.synchronize();
  3359. bool didXYZ = false;
  3360. LOOP_XYZE(i) {
  3361. if (code_seen(axis_codes[i])) {
  3362. float p = current_position[i],
  3363. v = code_value_axis_units(i);
  3364. current_position[i] = v;
  3365. if (i != E_AXIS) {
  3366. position_shift[i] += v - p; // Offset the coordinate space
  3367. update_software_endstops((AxisEnum)i);
  3368. didXYZ = true;
  3369. }
  3370. }
  3371. }
  3372. if (didXYZ)
  3373. SYNC_PLAN_POSITION_KINEMATIC();
  3374. else if (didE)
  3375. sync_plan_position_e();
  3376. }
  3377. #if ENABLED(ULTIPANEL)
  3378. /**
  3379. * M0: Unconditional stop - Wait for user button press on LCD
  3380. * M1: Conditional stop - Wait for user button press on LCD
  3381. */
  3382. inline void gcode_M0_M1() {
  3383. char* args = current_command_args;
  3384. millis_t codenum = 0;
  3385. bool hasP = false, hasS = false;
  3386. if (code_seen('P')) {
  3387. codenum = code_value_millis(); // milliseconds to wait
  3388. hasP = codenum > 0;
  3389. }
  3390. if (code_seen('S')) {
  3391. codenum = code_value_millis_from_seconds(); // seconds to wait
  3392. hasS = codenum > 0;
  3393. }
  3394. if (!hasP && !hasS && *args != '\0')
  3395. lcd_setstatus(args, true);
  3396. else {
  3397. LCD_MESSAGEPGM(MSG_USERWAIT);
  3398. #if ENABLED(LCD_PROGRESS_BAR) && PROGRESS_MSG_EXPIRE > 0
  3399. dontExpireStatus();
  3400. #endif
  3401. }
  3402. lcd_ignore_click();
  3403. stepper.synchronize();
  3404. refresh_cmd_timeout();
  3405. if (codenum > 0) {
  3406. codenum += previous_cmd_ms; // wait until this time for a click
  3407. KEEPALIVE_STATE(PAUSED_FOR_USER);
  3408. while (PENDING(millis(), codenum) && !lcd_clicked()) idle();
  3409. KEEPALIVE_STATE(IN_HANDLER);
  3410. lcd_ignore_click(false);
  3411. }
  3412. else {
  3413. if (!lcd_detected()) return;
  3414. KEEPALIVE_STATE(PAUSED_FOR_USER);
  3415. while (!lcd_clicked()) idle();
  3416. KEEPALIVE_STATE(IN_HANDLER);
  3417. }
  3418. if (IS_SD_PRINTING)
  3419. LCD_MESSAGEPGM(MSG_RESUMING);
  3420. else
  3421. LCD_MESSAGEPGM(WELCOME_MSG);
  3422. }
  3423. #endif // ULTIPANEL
  3424. /**
  3425. * M17: Enable power on all stepper motors
  3426. */
  3427. inline void gcode_M17() {
  3428. LCD_MESSAGEPGM(MSG_NO_MOVE);
  3429. enable_all_steppers();
  3430. }
  3431. #if ENABLED(SDSUPPORT)
  3432. /**
  3433. * M20: List SD card to serial output
  3434. */
  3435. inline void gcode_M20() {
  3436. SERIAL_PROTOCOLLNPGM(MSG_BEGIN_FILE_LIST);
  3437. card.ls();
  3438. SERIAL_PROTOCOLLNPGM(MSG_END_FILE_LIST);
  3439. }
  3440. /**
  3441. * M21: Init SD Card
  3442. */
  3443. inline void gcode_M21() {
  3444. card.initsd();
  3445. }
  3446. /**
  3447. * M22: Release SD Card
  3448. */
  3449. inline void gcode_M22() {
  3450. card.release();
  3451. }
  3452. /**
  3453. * M23: Open a file
  3454. */
  3455. inline void gcode_M23() {
  3456. card.openFile(current_command_args, true);
  3457. }
  3458. /**
  3459. * M24: Start SD Print
  3460. */
  3461. inline void gcode_M24() {
  3462. card.startFileprint();
  3463. print_job_timer.start();
  3464. }
  3465. /**
  3466. * M25: Pause SD Print
  3467. */
  3468. inline void gcode_M25() {
  3469. card.pauseSDPrint();
  3470. }
  3471. /**
  3472. * M26: Set SD Card file index
  3473. */
  3474. inline void gcode_M26() {
  3475. if (card.cardOK && code_seen('S'))
  3476. card.setIndex(code_value_long());
  3477. }
  3478. /**
  3479. * M27: Get SD Card status
  3480. */
  3481. inline void gcode_M27() {
  3482. card.getStatus();
  3483. }
  3484. /**
  3485. * M28: Start SD Write
  3486. */
  3487. inline void gcode_M28() {
  3488. card.openFile(current_command_args, false);
  3489. }
  3490. /**
  3491. * M29: Stop SD Write
  3492. * Processed in write to file routine above
  3493. */
  3494. inline void gcode_M29() {
  3495. // card.saving = false;
  3496. }
  3497. /**
  3498. * M30 <filename>: Delete SD Card file
  3499. */
  3500. inline void gcode_M30() {
  3501. if (card.cardOK) {
  3502. card.closefile();
  3503. card.removeFile(current_command_args);
  3504. }
  3505. }
  3506. #endif //SDSUPPORT
  3507. /**
  3508. * M31: Get the time since the start of SD Print (or last M109)
  3509. */
  3510. inline void gcode_M31() {
  3511. char buffer[21];
  3512. duration_t elapsed = print_job_timer.duration();
  3513. elapsed.toString(buffer);
  3514. lcd_setstatus(buffer);
  3515. SERIAL_ECHO_START;
  3516. SERIAL_ECHOPGM("Print time: ");
  3517. SERIAL_ECHOLN(buffer);
  3518. thermalManager.autotempShutdown();
  3519. }
  3520. #if ENABLED(SDSUPPORT)
  3521. /**
  3522. * M32: Select file and start SD Print
  3523. */
  3524. inline void gcode_M32() {
  3525. if (card.sdprinting)
  3526. stepper.synchronize();
  3527. char* namestartpos = strchr(current_command_args, '!'); // Find ! to indicate filename string start.
  3528. if (!namestartpos)
  3529. namestartpos = current_command_args; // Default name position, 4 letters after the M
  3530. else
  3531. namestartpos++; //to skip the '!'
  3532. bool call_procedure = code_seen('P') && (seen_pointer < namestartpos);
  3533. if (card.cardOK) {
  3534. card.openFile(namestartpos, true, call_procedure);
  3535. if (code_seen('S') && seen_pointer < namestartpos) // "S" (must occur _before_ the filename!)
  3536. card.setIndex(code_value_long());
  3537. card.startFileprint();
  3538. // Procedure calls count as normal print time.
  3539. if (!call_procedure) print_job_timer.start();
  3540. }
  3541. }
  3542. #if ENABLED(LONG_FILENAME_HOST_SUPPORT)
  3543. /**
  3544. * M33: Get the long full path of a file or folder
  3545. *
  3546. * Parameters:
  3547. * <dospath> Case-insensitive DOS-style path to a file or folder
  3548. *
  3549. * Example:
  3550. * M33 miscel~1/armchair/armcha~1.gco
  3551. *
  3552. * Output:
  3553. * /Miscellaneous/Armchair/Armchair.gcode
  3554. */
  3555. inline void gcode_M33() {
  3556. card.printLongPath(current_command_args);
  3557. }
  3558. #endif
  3559. /**
  3560. * M928: Start SD Write
  3561. */
  3562. inline void gcode_M928() {
  3563. card.openLogFile(current_command_args);
  3564. }
  3565. #endif // SDSUPPORT
  3566. /**
  3567. * M42: Change pin status via GCode
  3568. *
  3569. * P<pin> Pin number (LED if omitted)
  3570. * S<byte> Pin status from 0 - 255
  3571. */
  3572. inline void gcode_M42() {
  3573. if (!code_seen('S')) return;
  3574. int pin_status = code_value_int();
  3575. if (pin_status < 0 || pin_status > 255) return;
  3576. int pin_number = code_seen('P') ? code_value_int() : LED_PIN;
  3577. if (pin_number < 0) return;
  3578. for (uint8_t i = 0; i < COUNT(sensitive_pins); i++)
  3579. if (pin_number == sensitive_pins[i]) return;
  3580. pinMode(pin_number, OUTPUT);
  3581. digitalWrite(pin_number, pin_status);
  3582. analogWrite(pin_number, pin_status);
  3583. #if FAN_COUNT > 0
  3584. switch (pin_number) {
  3585. #if HAS_FAN0
  3586. case FAN_PIN: fanSpeeds[0] = pin_status; break;
  3587. #endif
  3588. #if HAS_FAN1
  3589. case FAN1_PIN: fanSpeeds[1] = pin_status; break;
  3590. #endif
  3591. #if HAS_FAN2
  3592. case FAN2_PIN: fanSpeeds[2] = pin_status; break;
  3593. #endif
  3594. }
  3595. #endif
  3596. }
  3597. #if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
  3598. /**
  3599. * M48: Z probe repeatability measurement function.
  3600. *
  3601. * Usage:
  3602. * M48 <P#> <X#> <Y#> <V#> <E> <L#>
  3603. * P = Number of sampled points (4-50, default 10)
  3604. * X = Sample X position
  3605. * Y = Sample Y position
  3606. * V = Verbose level (0-4, default=1)
  3607. * E = Engage Z probe for each reading
  3608. * L = Number of legs of movement before probe
  3609. * S = Schizoid (Or Star if you prefer)
  3610. *
  3611. * This function assumes the bed has been homed. Specifically, that a G28 command
  3612. * as been issued prior to invoking the M48 Z probe repeatability measurement function.
  3613. * Any information generated by a prior G29 Bed leveling command will be lost and need to be
  3614. * regenerated.
  3615. */
  3616. inline void gcode_M48() {
  3617. if (axis_unhomed_error(true, true, true)) return;
  3618. int8_t verbose_level = code_seen('V') ? code_value_byte() : 1;
  3619. if (verbose_level < 0 || verbose_level > 4) {
  3620. SERIAL_PROTOCOLLNPGM("?Verbose Level not plausible (0-4).");
  3621. return;
  3622. }
  3623. if (verbose_level > 0)
  3624. SERIAL_PROTOCOLLNPGM("M48 Z-Probe Repeatability test");
  3625. int8_t n_samples = code_seen('P') ? code_value_byte() : 10;
  3626. if (n_samples < 4 || n_samples > 50) {
  3627. SERIAL_PROTOCOLLNPGM("?Sample size not plausible (4-50).");
  3628. return;
  3629. }
  3630. float X_current = current_position[X_AXIS],
  3631. Y_current = current_position[Y_AXIS];
  3632. bool stow_probe_after_each = code_seen('E');
  3633. float X_probe_location = code_seen('X') ? code_value_axis_units(X_AXIS) : X_current + X_PROBE_OFFSET_FROM_EXTRUDER;
  3634. #if DISABLED(DELTA)
  3635. if (X_probe_location < LOGICAL_X_POSITION(MIN_PROBE_X) || X_probe_location > LOGICAL_X_POSITION(MAX_PROBE_X)) {
  3636. out_of_range_error(PSTR("X"));
  3637. return;
  3638. }
  3639. #endif
  3640. float Y_probe_location = code_seen('Y') ? code_value_axis_units(Y_AXIS) : Y_current + Y_PROBE_OFFSET_FROM_EXTRUDER;
  3641. #if DISABLED(DELTA)
  3642. if (Y_probe_location < LOGICAL_Y_POSITION(MIN_PROBE_Y) || Y_probe_location > LOGICAL_Y_POSITION(MAX_PROBE_Y)) {
  3643. out_of_range_error(PSTR("Y"));
  3644. return;
  3645. }
  3646. #else
  3647. if (HYPOT(RAW_X_POSITION(X_probe_location), RAW_Y_POSITION(Y_probe_location)) > DELTA_PROBEABLE_RADIUS) {
  3648. SERIAL_PROTOCOLLNPGM("? (X,Y) location outside of probeable radius.");
  3649. return;
  3650. }
  3651. #endif
  3652. bool seen_L = code_seen('L');
  3653. uint8_t n_legs = seen_L ? code_value_byte() : 0;
  3654. if (n_legs > 15) {
  3655. SERIAL_PROTOCOLLNPGM("?Number of legs in movement not plausible (0-15).");
  3656. return;
  3657. }
  3658. if (n_legs == 1) n_legs = 2;
  3659. bool schizoid_flag = code_seen('S');
  3660. if (schizoid_flag && !seen_L) n_legs = 7;
  3661. /**
  3662. * Now get everything to the specified probe point So we can safely do a
  3663. * probe to get us close to the bed. If the Z-Axis is far from the bed,
  3664. * we don't want to use that as a starting point for each probe.
  3665. */
  3666. if (verbose_level > 2)
  3667. SERIAL_PROTOCOLLNPGM("Positioning the probe...");
  3668. #if ENABLED(DELTA)
  3669. // we don't do bed level correction in M48 because we want the raw data when we probe
  3670. reset_bed_level();
  3671. #elif ENABLED(AUTO_BED_LEVELING_FEATURE)
  3672. // we don't do bed level correction in M48 because we want the raw data when we probe
  3673. planner.bed_level_matrix.set_to_identity();
  3674. #endif
  3675. setup_for_endstop_or_probe_move();
  3676. // Move to the first point, deploy, and probe
  3677. probe_pt(X_probe_location, Y_probe_location, stow_probe_after_each, verbose_level);
  3678. randomSeed(millis());
  3679. double mean = 0, sigma = 0, sample_set[n_samples];
  3680. for (uint8_t n = 0; n < n_samples; n++) {
  3681. if (n_legs) {
  3682. int dir = (random(0, 10) > 5.0) ? -1 : 1; // clockwise or counter clockwise
  3683. float angle = random(0.0, 360.0),
  3684. radius = random(
  3685. #if ENABLED(DELTA)
  3686. DELTA_PROBEABLE_RADIUS / 8, DELTA_PROBEABLE_RADIUS / 3
  3687. #else
  3688. 5, X_MAX_LENGTH / 8
  3689. #endif
  3690. );
  3691. if (verbose_level > 3) {
  3692. SERIAL_ECHOPAIR("Starting radius: ", radius);
  3693. SERIAL_ECHOPAIR(" angle: ", angle);
  3694. SERIAL_ECHOPGM(" Direction: ");
  3695. if (dir > 0) SERIAL_ECHOPGM("Counter-");
  3696. SERIAL_ECHOLNPGM("Clockwise");
  3697. }
  3698. for (uint8_t l = 0; l < n_legs - 1; l++) {
  3699. double delta_angle;
  3700. if (schizoid_flag)
  3701. // The points of a 5 point star are 72 degrees apart. We need to
  3702. // skip a point and go to the next one on the star.
  3703. delta_angle = dir * 2.0 * 72.0;
  3704. else
  3705. // If we do this line, we are just trying to move further
  3706. // around the circle.
  3707. delta_angle = dir * (float) random(25, 45);
  3708. angle += delta_angle;
  3709. while (angle > 360.0) // We probably do not need to keep the angle between 0 and 2*PI, but the
  3710. angle -= 360.0; // Arduino documentation says the trig functions should not be given values
  3711. while (angle < 0.0) // outside of this range. It looks like they behave correctly with
  3712. angle += 360.0; // numbers outside of the range, but just to be safe we clamp them.
  3713. X_current = X_probe_location - (X_PROBE_OFFSET_FROM_EXTRUDER) + cos(RADIANS(angle)) * radius;
  3714. Y_current = Y_probe_location - (Y_PROBE_OFFSET_FROM_EXTRUDER) + sin(RADIANS(angle)) * radius;
  3715. #if DISABLED(DELTA)
  3716. X_current = constrain(X_current, X_MIN_POS, X_MAX_POS);
  3717. Y_current = constrain(Y_current, Y_MIN_POS, Y_MAX_POS);
  3718. #else
  3719. // If we have gone out too far, we can do a simple fix and scale the numbers
  3720. // back in closer to the origin.
  3721. while (HYPOT(X_current, Y_current) > DELTA_PROBEABLE_RADIUS) {
  3722. X_current /= 1.25;
  3723. Y_current /= 1.25;
  3724. if (verbose_level > 3) {
  3725. SERIAL_ECHOPAIR("Pulling point towards center:", X_current);
  3726. SERIAL_ECHOLNPAIR(", ", Y_current);
  3727. }
  3728. }
  3729. #endif
  3730. if (verbose_level > 3) {
  3731. SERIAL_PROTOCOLPGM("Going to:");
  3732. SERIAL_ECHOPAIR(" X", X_current);
  3733. SERIAL_ECHOPAIR(" Y", Y_current);
  3734. SERIAL_ECHOLNPAIR(" Z", current_position[Z_AXIS]);
  3735. }
  3736. do_blocking_move_to_xy(X_current, Y_current);
  3737. } // n_legs loop
  3738. } // n_legs
  3739. // Probe a single point
  3740. sample_set[n] = probe_pt(X_probe_location, Y_probe_location, stow_probe_after_each, verbose_level);
  3741. /**
  3742. * Get the current mean for the data points we have so far
  3743. */
  3744. double sum = 0.0;
  3745. for (uint8_t j = 0; j <= n; j++) sum += sample_set[j];
  3746. mean = sum / (n + 1);
  3747. /**
  3748. * Now, use that mean to calculate the standard deviation for the
  3749. * data points we have so far
  3750. */
  3751. sum = 0.0;
  3752. for (uint8_t j = 0; j <= n; j++)
  3753. sum += sq(sample_set[j] - mean);
  3754. sigma = sqrt(sum / (n + 1));
  3755. if (verbose_level > 0) {
  3756. if (verbose_level > 1) {
  3757. SERIAL_PROTOCOL(n + 1);
  3758. SERIAL_PROTOCOLPGM(" of ");
  3759. SERIAL_PROTOCOL((int)n_samples);
  3760. SERIAL_PROTOCOLPGM(" z: ");
  3761. SERIAL_PROTOCOL_F(current_position[Z_AXIS], 6);
  3762. if (verbose_level > 2) {
  3763. SERIAL_PROTOCOLPGM(" mean: ");
  3764. SERIAL_PROTOCOL_F(mean, 6);
  3765. SERIAL_PROTOCOLPGM(" sigma: ");
  3766. SERIAL_PROTOCOL_F(sigma, 6);
  3767. }
  3768. }
  3769. SERIAL_EOL;
  3770. }
  3771. } // End of probe loop
  3772. if (STOW_PROBE()) return;
  3773. if (verbose_level > 0) {
  3774. SERIAL_PROTOCOLPGM("Mean: ");
  3775. SERIAL_PROTOCOL_F(mean, 6);
  3776. SERIAL_EOL;
  3777. }
  3778. SERIAL_PROTOCOLPGM("Standard Deviation: ");
  3779. SERIAL_PROTOCOL_F(sigma, 6);
  3780. SERIAL_EOL; SERIAL_EOL;
  3781. clean_up_after_endstop_or_probe_move();
  3782. report_current_position();
  3783. }
  3784. #endif // Z_MIN_PROBE_REPEATABILITY_TEST
  3785. /**
  3786. * M75: Start print timer
  3787. */
  3788. inline void gcode_M75() { print_job_timer.start(); }
  3789. /**
  3790. * M76: Pause print timer
  3791. */
  3792. inline void gcode_M76() { print_job_timer.pause(); }
  3793. /**
  3794. * M77: Stop print timer
  3795. */
  3796. inline void gcode_M77() { print_job_timer.stop(); }
  3797. #if ENABLED(PRINTCOUNTER)
  3798. /**
  3799. * M78: Show print statistics
  3800. */
  3801. inline void gcode_M78() {
  3802. // "M78 S78" will reset the statistics
  3803. if (code_seen('S') && code_value_int() == 78)
  3804. print_job_timer.initStats();
  3805. else print_job_timer.showStats();
  3806. }
  3807. #endif
  3808. /**
  3809. * M104: Set hot end temperature
  3810. */
  3811. inline void gcode_M104() {
  3812. if (get_target_extruder_from_command(104)) return;
  3813. if (DEBUGGING(DRYRUN)) return;
  3814. #if ENABLED(SINGLENOZZLE)
  3815. if (target_extruder != active_extruder) return;
  3816. #endif
  3817. if (code_seen('S')) {
  3818. thermalManager.setTargetHotend(code_value_temp_abs(), target_extruder);
  3819. #if ENABLED(DUAL_X_CARRIAGE)
  3820. if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && target_extruder == 0)
  3821. thermalManager.setTargetHotend(code_value_temp_abs() == 0.0 ? 0.0 : code_value_temp_abs() + duplicate_extruder_temp_offset, 1);
  3822. #endif
  3823. #if ENABLED(PRINTJOB_TIMER_AUTOSTART)
  3824. /**
  3825. * Stop the timer at the end of print, starting is managed by
  3826. * 'heat and wait' M109.
  3827. * We use half EXTRUDE_MINTEMP here to allow nozzles to be put into hot
  3828. * stand by mode, for instance in a dual extruder setup, without affecting
  3829. * the running print timer.
  3830. */
  3831. if (code_value_temp_abs() <= (EXTRUDE_MINTEMP)/2) {
  3832. print_job_timer.stop();
  3833. LCD_MESSAGEPGM(WELCOME_MSG);
  3834. }
  3835. #endif
  3836. if (code_value_temp_abs() > thermalManager.degHotend(target_extruder)) LCD_MESSAGEPGM(MSG_HEATING);
  3837. }
  3838. }
  3839. #if HAS_TEMP_HOTEND || HAS_TEMP_BED
  3840. void print_heaterstates() {
  3841. #if HAS_TEMP_HOTEND
  3842. SERIAL_PROTOCOLPGM(" T:");
  3843. SERIAL_PROTOCOL_F(thermalManager.degHotend(target_extruder), 1);
  3844. SERIAL_PROTOCOLPGM(" /");
  3845. SERIAL_PROTOCOL_F(thermalManager.degTargetHotend(target_extruder), 1);
  3846. #if ENABLED(SHOW_TEMP_ADC_VALUES)
  3847. SERIAL_PROTOCOLPAIR(" (", thermalManager.current_temperature_raw[target_extruder] / OVERSAMPLENR);
  3848. SERIAL_CHAR(')');
  3849. #endif
  3850. #endif
  3851. #if HAS_TEMP_BED
  3852. SERIAL_PROTOCOLPGM(" B:");
  3853. SERIAL_PROTOCOL_F(thermalManager.degBed(), 1);
  3854. SERIAL_PROTOCOLPGM(" /");
  3855. SERIAL_PROTOCOL_F(thermalManager.degTargetBed(), 1);
  3856. #if ENABLED(SHOW_TEMP_ADC_VALUES)
  3857. SERIAL_PROTOCOLPAIR(" (", thermalManager.current_temperature_bed_raw / OVERSAMPLENR);
  3858. SERIAL_CHAR(')');
  3859. #endif
  3860. #endif
  3861. #if HOTENDS > 1
  3862. HOTEND_LOOP() {
  3863. SERIAL_PROTOCOLPAIR(" T", e);
  3864. SERIAL_PROTOCOLCHAR(':');
  3865. SERIAL_PROTOCOL_F(thermalManager.degHotend(e), 1);
  3866. SERIAL_PROTOCOLPGM(" /");
  3867. SERIAL_PROTOCOL_F(thermalManager.degTargetHotend(e), 1);
  3868. #if ENABLED(SHOW_TEMP_ADC_VALUES)
  3869. SERIAL_PROTOCOLPAIR(" (", thermalManager.current_temperature_raw[e] / OVERSAMPLENR);
  3870. SERIAL_CHAR(')');
  3871. #endif
  3872. }
  3873. #endif
  3874. SERIAL_PROTOCOLPGM(" @:");
  3875. SERIAL_PROTOCOL(thermalManager.getHeaterPower(target_extruder));
  3876. #if HAS_TEMP_BED
  3877. SERIAL_PROTOCOLPGM(" B@:");
  3878. SERIAL_PROTOCOL(thermalManager.getHeaterPower(-1));
  3879. #endif
  3880. #if HOTENDS > 1
  3881. HOTEND_LOOP() {
  3882. SERIAL_PROTOCOLPAIR(" @", e);
  3883. SERIAL_PROTOCOLCHAR(':');
  3884. SERIAL_PROTOCOL(thermalManager.getHeaterPower(e));
  3885. }
  3886. #endif
  3887. }
  3888. #endif
  3889. /**
  3890. * M105: Read hot end and bed temperature
  3891. */
  3892. inline void gcode_M105() {
  3893. if (get_target_extruder_from_command(105)) return;
  3894. #if HAS_TEMP_HOTEND || HAS_TEMP_BED
  3895. SERIAL_PROTOCOLPGM(MSG_OK);
  3896. print_heaterstates();
  3897. #else // !HAS_TEMP_HOTEND && !HAS_TEMP_BED
  3898. SERIAL_ERROR_START;
  3899. SERIAL_ERRORLNPGM(MSG_ERR_NO_THERMISTORS);
  3900. #endif
  3901. SERIAL_EOL;
  3902. }
  3903. #if FAN_COUNT > 0
  3904. /**
  3905. * M106: Set Fan Speed
  3906. *
  3907. * S<int> Speed between 0-255
  3908. * P<index> Fan index, if more than one fan
  3909. */
  3910. inline void gcode_M106() {
  3911. uint16_t s = code_seen('S') ? code_value_ushort() : 255,
  3912. p = code_seen('P') ? code_value_ushort() : 0;
  3913. NOMORE(s, 255);
  3914. if (p < FAN_COUNT) fanSpeeds[p] = s;
  3915. }
  3916. /**
  3917. * M107: Fan Off
  3918. */
  3919. inline void gcode_M107() {
  3920. uint16_t p = code_seen('P') ? code_value_ushort() : 0;
  3921. if (p < FAN_COUNT) fanSpeeds[p] = 0;
  3922. }
  3923. #endif // FAN_COUNT > 0
  3924. #if DISABLED(EMERGENCY_PARSER)
  3925. /**
  3926. * M108: Stop the waiting for heaters in M109, M190, M303. Does not affect the target temperature.
  3927. */
  3928. inline void gcode_M108() { wait_for_heatup = false; }
  3929. /**
  3930. * M112: Emergency Stop
  3931. */
  3932. inline void gcode_M112() { kill(PSTR(MSG_KILLED)); }
  3933. /**
  3934. * M410: Quickstop - Abort all planned moves
  3935. *
  3936. * This will stop the carriages mid-move, so most likely they
  3937. * will be out of sync with the stepper position after this.
  3938. */
  3939. inline void gcode_M410() { quickstop_stepper(); }
  3940. #endif
  3941. #ifndef MIN_COOLING_SLOPE_DEG
  3942. #define MIN_COOLING_SLOPE_DEG 1.50
  3943. #endif
  3944. #ifndef MIN_COOLING_SLOPE_TIME
  3945. #define MIN_COOLING_SLOPE_TIME 60
  3946. #endif
  3947. /**
  3948. * M109: Sxxx Wait for extruder(s) to reach temperature. Waits only when heating.
  3949. * Rxxx Wait for extruder(s) to reach temperature. Waits when heating and cooling.
  3950. */
  3951. inline void gcode_M109() {
  3952. if (get_target_extruder_from_command(109)) return;
  3953. if (DEBUGGING(DRYRUN)) return;
  3954. #if ENABLED(SINGLENOZZLE)
  3955. if (target_extruder != active_extruder) return;
  3956. #endif
  3957. bool no_wait_for_cooling = code_seen('S');
  3958. if (no_wait_for_cooling || code_seen('R')) {
  3959. thermalManager.setTargetHotend(code_value_temp_abs(), target_extruder);
  3960. #if ENABLED(DUAL_X_CARRIAGE)
  3961. if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && target_extruder == 0)
  3962. thermalManager.setTargetHotend(code_value_temp_abs() == 0.0 ? 0.0 : code_value_temp_abs() + duplicate_extruder_temp_offset, 1);
  3963. #endif
  3964. #if ENABLED(PRINTJOB_TIMER_AUTOSTART)
  3965. /**
  3966. * We use half EXTRUDE_MINTEMP here to allow nozzles to be put into hot
  3967. * stand by mode, for instance in a dual extruder setup, without affecting
  3968. * the running print timer.
  3969. */
  3970. if (code_value_temp_abs() <= (EXTRUDE_MINTEMP)/2) {
  3971. print_job_timer.stop();
  3972. LCD_MESSAGEPGM(WELCOME_MSG);
  3973. }
  3974. /**
  3975. * We do not check if the timer is already running because this check will
  3976. * be done for us inside the Stopwatch::start() method thus a running timer
  3977. * will not restart.
  3978. */
  3979. else print_job_timer.start();
  3980. #endif
  3981. if (thermalManager.isHeatingHotend(target_extruder)) LCD_MESSAGEPGM(MSG_HEATING);
  3982. }
  3983. #if ENABLED(AUTOTEMP)
  3984. planner.autotemp_M109();
  3985. #endif
  3986. #if TEMP_RESIDENCY_TIME > 0
  3987. millis_t residency_start_ms = 0;
  3988. // Loop until the temperature has stabilized
  3989. #define TEMP_CONDITIONS (!residency_start_ms || PENDING(now, residency_start_ms + (TEMP_RESIDENCY_TIME) * 1000UL))
  3990. #else
  3991. // Loop until the temperature is very close target
  3992. #define TEMP_CONDITIONS (wants_to_cool ? thermalManager.isCoolingHotend(target_extruder) : thermalManager.isHeatingHotend(target_extruder))
  3993. #endif //TEMP_RESIDENCY_TIME > 0
  3994. float theTarget = -1.0, old_temp = 9999.0;
  3995. bool wants_to_cool = false;
  3996. wait_for_heatup = true;
  3997. millis_t now, next_temp_ms = 0, next_cool_check_ms = 0;
  3998. KEEPALIVE_STATE(NOT_BUSY);
  3999. do {
  4000. // Target temperature might be changed during the loop
  4001. if (theTarget != thermalManager.degTargetHotend(target_extruder)) {
  4002. wants_to_cool = thermalManager.isCoolingHotend(target_extruder);
  4003. theTarget = thermalManager.degTargetHotend(target_extruder);
  4004. // Exit if S<lower>, continue if S<higher>, R<lower>, or R<higher>
  4005. if (no_wait_for_cooling && wants_to_cool) break;
  4006. }
  4007. now = millis();
  4008. if (ELAPSED(now, next_temp_ms)) { //Print temp & remaining time every 1s while waiting
  4009. next_temp_ms = now + 1000UL;
  4010. print_heaterstates();
  4011. #if TEMP_RESIDENCY_TIME > 0
  4012. SERIAL_PROTOCOLPGM(" W:");
  4013. if (residency_start_ms) {
  4014. long rem = (((TEMP_RESIDENCY_TIME) * 1000UL) - (now - residency_start_ms)) / 1000UL;
  4015. SERIAL_PROTOCOLLN(rem);
  4016. }
  4017. else {
  4018. SERIAL_PROTOCOLLNPGM("?");
  4019. }
  4020. #else
  4021. SERIAL_EOL;
  4022. #endif
  4023. }
  4024. idle();
  4025. refresh_cmd_timeout(); // to prevent stepper_inactive_time from running out
  4026. float temp = thermalManager.degHotend(target_extruder);
  4027. #if TEMP_RESIDENCY_TIME > 0
  4028. float temp_diff = fabs(theTarget - temp);
  4029. if (!residency_start_ms) {
  4030. // Start the TEMP_RESIDENCY_TIME timer when we reach target temp for the first time.
  4031. if (temp_diff < TEMP_WINDOW) residency_start_ms = now;
  4032. }
  4033. else if (temp_diff > TEMP_HYSTERESIS) {
  4034. // Restart the timer whenever the temperature falls outside the hysteresis.
  4035. residency_start_ms = now;
  4036. }
  4037. #endif //TEMP_RESIDENCY_TIME > 0
  4038. // Prevent a wait-forever situation if R is misused i.e. M109 R0
  4039. if (wants_to_cool) {
  4040. // break after MIN_COOLING_SLOPE_TIME seconds
  4041. // if the temperature did not drop at least MIN_COOLING_SLOPE_DEG
  4042. if (!next_cool_check_ms || ELAPSED(now, next_cool_check_ms)) {
  4043. if (old_temp - temp < MIN_COOLING_SLOPE_DEG) break;
  4044. next_cool_check_ms = now + 1000UL * MIN_COOLING_SLOPE_TIME;
  4045. old_temp = temp;
  4046. }
  4047. }
  4048. } while (wait_for_heatup && TEMP_CONDITIONS);
  4049. LCD_MESSAGEPGM(MSG_HEATING_COMPLETE);
  4050. KEEPALIVE_STATE(IN_HANDLER);
  4051. }
  4052. #if HAS_TEMP_BED
  4053. #ifndef MIN_COOLING_SLOPE_DEG_BED
  4054. #define MIN_COOLING_SLOPE_DEG_BED 1.50
  4055. #endif
  4056. #ifndef MIN_COOLING_SLOPE_TIME_BED
  4057. #define MIN_COOLING_SLOPE_TIME_BED 60
  4058. #endif
  4059. /**
  4060. * M190: Sxxx Wait for bed current temp to reach target temp. Waits only when heating
  4061. * Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling
  4062. */
  4063. inline void gcode_M190() {
  4064. if (DEBUGGING(DRYRUN)) return;
  4065. LCD_MESSAGEPGM(MSG_BED_HEATING);
  4066. bool no_wait_for_cooling = code_seen('S');
  4067. if (no_wait_for_cooling || code_seen('R')) {
  4068. thermalManager.setTargetBed(code_value_temp_abs());
  4069. #if ENABLED(PRINTJOB_TIMER_AUTOSTART)
  4070. if (code_value_temp_abs() > BED_MINTEMP) {
  4071. /**
  4072. * We start the timer when 'heating and waiting' command arrives, LCD
  4073. * functions never wait. Cooling down managed by extruders.
  4074. *
  4075. * We do not check if the timer is already running because this check will
  4076. * be done for us inside the Stopwatch::start() method thus a running timer
  4077. * will not restart.
  4078. */
  4079. print_job_timer.start();
  4080. }
  4081. #endif
  4082. }
  4083. #if TEMP_BED_RESIDENCY_TIME > 0
  4084. millis_t residency_start_ms = 0;
  4085. // Loop until the temperature has stabilized
  4086. #define TEMP_BED_CONDITIONS (!residency_start_ms || PENDING(now, residency_start_ms + (TEMP_BED_RESIDENCY_TIME) * 1000UL))
  4087. #else
  4088. // Loop until the temperature is very close target
  4089. #define TEMP_BED_CONDITIONS (wants_to_cool ? thermalManager.isCoolingBed() : thermalManager.isHeatingBed())
  4090. #endif //TEMP_BED_RESIDENCY_TIME > 0
  4091. float theTarget = -1.0, old_temp = 9999.0;
  4092. bool wants_to_cool = false;
  4093. wait_for_heatup = true;
  4094. millis_t now, next_temp_ms = 0, next_cool_check_ms = 0;
  4095. KEEPALIVE_STATE(NOT_BUSY);
  4096. target_extruder = active_extruder; // for print_heaterstates
  4097. do {
  4098. // Target temperature might be changed during the loop
  4099. if (theTarget != thermalManager.degTargetBed()) {
  4100. wants_to_cool = thermalManager.isCoolingBed();
  4101. theTarget = thermalManager.degTargetBed();
  4102. // Exit if S<lower>, continue if S<higher>, R<lower>, or R<higher>
  4103. if (no_wait_for_cooling && wants_to_cool) break;
  4104. }
  4105. now = millis();
  4106. if (ELAPSED(now, next_temp_ms)) { //Print Temp Reading every 1 second while heating up.
  4107. next_temp_ms = now + 1000UL;
  4108. print_heaterstates();
  4109. #if TEMP_BED_RESIDENCY_TIME > 0
  4110. SERIAL_PROTOCOLPGM(" W:");
  4111. if (residency_start_ms) {
  4112. long rem = (((TEMP_BED_RESIDENCY_TIME) * 1000UL) - (now - residency_start_ms)) / 1000UL;
  4113. SERIAL_PROTOCOLLN(rem);
  4114. }
  4115. else {
  4116. SERIAL_PROTOCOLLNPGM("?");
  4117. }
  4118. #else
  4119. SERIAL_EOL;
  4120. #endif
  4121. }
  4122. idle();
  4123. refresh_cmd_timeout(); // to prevent stepper_inactive_time from running out
  4124. float temp = thermalManager.degBed();
  4125. #if TEMP_BED_RESIDENCY_TIME > 0
  4126. float temp_diff = fabs(theTarget - temp);
  4127. if (!residency_start_ms) {
  4128. // Start the TEMP_BED_RESIDENCY_TIME timer when we reach target temp for the first time.
  4129. if (temp_diff < TEMP_BED_WINDOW) residency_start_ms = now;
  4130. }
  4131. else if (temp_diff > TEMP_BED_HYSTERESIS) {
  4132. // Restart the timer whenever the temperature falls outside the hysteresis.
  4133. residency_start_ms = now;
  4134. }
  4135. #endif //TEMP_BED_RESIDENCY_TIME > 0
  4136. // Prevent a wait-forever situation if R is misused i.e. M190 R0
  4137. if (wants_to_cool) {
  4138. // break after MIN_COOLING_SLOPE_TIME_BED seconds
  4139. // if the temperature did not drop at least MIN_COOLING_SLOPE_DEG_BED
  4140. if (!next_cool_check_ms || ELAPSED(now, next_cool_check_ms)) {
  4141. if (old_temp - temp < MIN_COOLING_SLOPE_DEG_BED) break;
  4142. next_cool_check_ms = now + 1000UL * MIN_COOLING_SLOPE_TIME_BED;
  4143. old_temp = temp;
  4144. }
  4145. }
  4146. } while (wait_for_heatup && TEMP_BED_CONDITIONS);
  4147. LCD_MESSAGEPGM(MSG_BED_DONE);
  4148. KEEPALIVE_STATE(IN_HANDLER);
  4149. }
  4150. #endif // HAS_TEMP_BED
  4151. /**
  4152. * M110: Set Current Line Number
  4153. */
  4154. inline void gcode_M110() {
  4155. if (code_seen('N')) gcode_N = code_value_long();
  4156. }
  4157. /**
  4158. * M111: Set the debug level
  4159. */
  4160. inline void gcode_M111() {
  4161. marlin_debug_flags = code_seen('S') ? code_value_byte() : (uint8_t) DEBUG_NONE;
  4162. const static char str_debug_1[] PROGMEM = MSG_DEBUG_ECHO;
  4163. const static char str_debug_2[] PROGMEM = MSG_DEBUG_INFO;
  4164. const static char str_debug_4[] PROGMEM = MSG_DEBUG_ERRORS;
  4165. const static char str_debug_8[] PROGMEM = MSG_DEBUG_DRYRUN;
  4166. const static char str_debug_16[] PROGMEM = MSG_DEBUG_COMMUNICATION;
  4167. #if ENABLED(DEBUG_LEVELING_FEATURE)
  4168. const static char str_debug_32[] PROGMEM = MSG_DEBUG_LEVELING;
  4169. #endif
  4170. const static char* const debug_strings[] PROGMEM = {
  4171. str_debug_1, str_debug_2, str_debug_4, str_debug_8, str_debug_16,
  4172. #if ENABLED(DEBUG_LEVELING_FEATURE)
  4173. str_debug_32
  4174. #endif
  4175. };
  4176. SERIAL_ECHO_START;
  4177. SERIAL_ECHOPGM(MSG_DEBUG_PREFIX);
  4178. if (marlin_debug_flags) {
  4179. uint8_t comma = 0;
  4180. for (uint8_t i = 0; i < COUNT(debug_strings); i++) {
  4181. if (TEST(marlin_debug_flags, i)) {
  4182. if (comma++) SERIAL_CHAR(',');
  4183. serialprintPGM((char*)pgm_read_word(&(debug_strings[i])));
  4184. }
  4185. }
  4186. }
  4187. else {
  4188. SERIAL_ECHOPGM(MSG_DEBUG_OFF);
  4189. }
  4190. SERIAL_EOL;
  4191. }
  4192. #if ENABLED(HOST_KEEPALIVE_FEATURE)
  4193. /**
  4194. * M113: Get or set Host Keepalive interval (0 to disable)
  4195. *
  4196. * S<seconds> Optional. Set the keepalive interval.
  4197. */
  4198. inline void gcode_M113() {
  4199. if (code_seen('S')) {
  4200. host_keepalive_interval = code_value_byte();
  4201. NOMORE(host_keepalive_interval, 60);
  4202. }
  4203. else {
  4204. SERIAL_ECHO_START;
  4205. SERIAL_ECHOLNPAIR("M113 S", (unsigned long)host_keepalive_interval);
  4206. }
  4207. }
  4208. #endif
  4209. #if ENABLED(BARICUDA)
  4210. #if HAS_HEATER_1
  4211. /**
  4212. * M126: Heater 1 valve open
  4213. */
  4214. inline void gcode_M126() { baricuda_valve_pressure = code_seen('S') ? code_value_byte() : 255; }
  4215. /**
  4216. * M127: Heater 1 valve close
  4217. */
  4218. inline void gcode_M127() { baricuda_valve_pressure = 0; }
  4219. #endif
  4220. #if HAS_HEATER_2
  4221. /**
  4222. * M128: Heater 2 valve open
  4223. */
  4224. inline void gcode_M128() { baricuda_e_to_p_pressure = code_seen('S') ? code_value_byte() : 255; }
  4225. /**
  4226. * M129: Heater 2 valve close
  4227. */
  4228. inline void gcode_M129() { baricuda_e_to_p_pressure = 0; }
  4229. #endif
  4230. #endif //BARICUDA
  4231. /**
  4232. * M140: Set bed temperature
  4233. */
  4234. inline void gcode_M140() {
  4235. if (DEBUGGING(DRYRUN)) return;
  4236. if (code_seen('S')) thermalManager.setTargetBed(code_value_temp_abs());
  4237. }
  4238. #if ENABLED(ULTIPANEL)
  4239. /**
  4240. * M145: Set the heatup state for a material in the LCD menu
  4241. * S<material> (0=PLA, 1=ABS)
  4242. * H<hotend temp>
  4243. * B<bed temp>
  4244. * F<fan speed>
  4245. */
  4246. inline void gcode_M145() {
  4247. int8_t material = code_seen('S') ? (int8_t)code_value_int() : 0;
  4248. if (material < 0 || material > 1) {
  4249. SERIAL_ERROR_START;
  4250. SERIAL_ERRORLNPGM(MSG_ERR_MATERIAL_INDEX);
  4251. }
  4252. else {
  4253. int v;
  4254. switch (material) {
  4255. case 0:
  4256. if (code_seen('H')) {
  4257. v = code_value_int();
  4258. preheatHotendTemp1 = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15);
  4259. }
  4260. if (code_seen('F')) {
  4261. v = code_value_int();
  4262. preheatFanSpeed1 = constrain(v, 0, 255);
  4263. }
  4264. #if TEMP_SENSOR_BED != 0
  4265. if (code_seen('B')) {
  4266. v = code_value_int();
  4267. preheatBedTemp1 = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15);
  4268. }
  4269. #endif
  4270. break;
  4271. case 1:
  4272. if (code_seen('H')) {
  4273. v = code_value_int();
  4274. preheatHotendTemp2 = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15);
  4275. }
  4276. if (code_seen('F')) {
  4277. v = code_value_int();
  4278. preheatFanSpeed2 = constrain(v, 0, 255);
  4279. }
  4280. #if TEMP_SENSOR_BED != 0
  4281. if (code_seen('B')) {
  4282. v = code_value_int();
  4283. preheatBedTemp2 = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15);
  4284. }
  4285. #endif
  4286. break;
  4287. }
  4288. }
  4289. }
  4290. #endif
  4291. #if ENABLED(TEMPERATURE_UNITS_SUPPORT)
  4292. /**
  4293. * M149: Set temperature units
  4294. */
  4295. inline void gcode_M149() {
  4296. if (code_seen('C')) {
  4297. set_input_temp_units(TEMPUNIT_C);
  4298. } else if (code_seen('K')) {
  4299. set_input_temp_units(TEMPUNIT_K);
  4300. } else if (code_seen('F')) {
  4301. set_input_temp_units(TEMPUNIT_F);
  4302. }
  4303. }
  4304. #endif
  4305. #if HAS_POWER_SWITCH
  4306. /**
  4307. * M80: Turn on Power Supply
  4308. */
  4309. inline void gcode_M80() {
  4310. OUT_WRITE(PS_ON_PIN, PS_ON_AWAKE); //GND
  4311. /**
  4312. * If you have a switch on suicide pin, this is useful
  4313. * if you want to start another print with suicide feature after
  4314. * a print without suicide...
  4315. */
  4316. #if HAS_SUICIDE
  4317. OUT_WRITE(SUICIDE_PIN, HIGH);
  4318. #endif
  4319. #if ENABLED(ULTIPANEL)
  4320. powersupply = true;
  4321. LCD_MESSAGEPGM(WELCOME_MSG);
  4322. lcd_update();
  4323. #endif
  4324. }
  4325. #endif // HAS_POWER_SWITCH
  4326. /**
  4327. * M81: Turn off Power, including Power Supply, if there is one.
  4328. *
  4329. * This code should ALWAYS be available for EMERGENCY SHUTDOWN!
  4330. */
  4331. inline void gcode_M81() {
  4332. thermalManager.disable_all_heaters();
  4333. stepper.finish_and_disable();
  4334. #if FAN_COUNT > 0
  4335. #if FAN_COUNT > 1
  4336. for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0;
  4337. #else
  4338. fanSpeeds[0] = 0;
  4339. #endif
  4340. #endif
  4341. delay(1000); // Wait 1 second before switching off
  4342. #if HAS_SUICIDE
  4343. stepper.synchronize();
  4344. suicide();
  4345. #elif HAS_POWER_SWITCH
  4346. OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP);
  4347. #endif
  4348. #if ENABLED(ULTIPANEL)
  4349. #if HAS_POWER_SWITCH
  4350. powersupply = false;
  4351. #endif
  4352. LCD_MESSAGEPGM(MACHINE_NAME " " MSG_OFF ".");
  4353. lcd_update();
  4354. #endif
  4355. }
  4356. /**
  4357. * M82: Set E codes absolute (default)
  4358. */
  4359. inline void gcode_M82() { axis_relative_modes[E_AXIS] = false; }
  4360. /**
  4361. * M83: Set E codes relative while in Absolute Coordinates (G90) mode
  4362. */
  4363. inline void gcode_M83() { axis_relative_modes[E_AXIS] = true; }
  4364. /**
  4365. * M18, M84: Disable all stepper motors
  4366. */
  4367. inline void gcode_M18_M84() {
  4368. if (code_seen('S')) {
  4369. stepper_inactive_time = code_value_millis_from_seconds();
  4370. }
  4371. else {
  4372. bool all_axis = !((code_seen('X')) || (code_seen('Y')) || (code_seen('Z')) || (code_seen('E')));
  4373. if (all_axis) {
  4374. stepper.finish_and_disable();
  4375. }
  4376. else {
  4377. stepper.synchronize();
  4378. if (code_seen('X')) disable_x();
  4379. if (code_seen('Y')) disable_y();
  4380. if (code_seen('Z')) disable_z();
  4381. #if ((E0_ENABLE_PIN != X_ENABLE_PIN) && (E1_ENABLE_PIN != Y_ENABLE_PIN)) // Only enable on boards that have seperate ENABLE_PINS
  4382. if (code_seen('E')) {
  4383. disable_e0();
  4384. disable_e1();
  4385. disable_e2();
  4386. disable_e3();
  4387. }
  4388. #endif
  4389. }
  4390. }
  4391. }
  4392. /**
  4393. * M85: Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default)
  4394. */
  4395. inline void gcode_M85() {
  4396. if (code_seen('S')) max_inactive_time = code_value_millis_from_seconds();
  4397. }
  4398. /**
  4399. * M92: Set axis steps-per-unit for one or more axes, X, Y, Z, and E.
  4400. * (Follows the same syntax as G92)
  4401. */
  4402. inline void gcode_M92() {
  4403. LOOP_XYZE(i) {
  4404. if (code_seen(axis_codes[i])) {
  4405. if (i == E_AXIS) {
  4406. float value = code_value_per_axis_unit(i);
  4407. if (value < 20.0) {
  4408. float factor = planner.axis_steps_per_mm[i] / value; // increase e constants if M92 E14 is given for netfab.
  4409. planner.max_e_jerk *= factor;
  4410. planner.max_feedrate_mm_s[i] *= factor;
  4411. planner.max_acceleration_steps_per_s2[i] *= factor;
  4412. }
  4413. planner.axis_steps_per_mm[i] = value;
  4414. }
  4415. else {
  4416. planner.axis_steps_per_mm[i] = code_value_per_axis_unit(i);
  4417. }
  4418. }
  4419. }
  4420. planner.refresh_positioning();
  4421. }
  4422. /**
  4423. * Output the current position to serial
  4424. */
  4425. static void report_current_position() {
  4426. SERIAL_PROTOCOLPGM("X:");
  4427. SERIAL_PROTOCOL(current_position[X_AXIS]);
  4428. SERIAL_PROTOCOLPGM(" Y:");
  4429. SERIAL_PROTOCOL(current_position[Y_AXIS]);
  4430. SERIAL_PROTOCOLPGM(" Z:");
  4431. SERIAL_PROTOCOL(current_position[Z_AXIS]);
  4432. SERIAL_PROTOCOLPGM(" E:");
  4433. SERIAL_PROTOCOL(current_position[E_AXIS]);
  4434. stepper.report_positions();
  4435. #if ENABLED(SCARA)
  4436. SERIAL_PROTOCOLPGM("SCARA Theta:");
  4437. SERIAL_PROTOCOL(delta[X_AXIS]);
  4438. SERIAL_PROTOCOLPGM(" Psi+Theta:");
  4439. SERIAL_PROTOCOL(delta[Y_AXIS]);
  4440. SERIAL_EOL;
  4441. SERIAL_PROTOCOLPGM("SCARA Cal - Theta:");
  4442. SERIAL_PROTOCOL(delta[X_AXIS]);
  4443. SERIAL_PROTOCOLPGM(" Psi+Theta (90):");
  4444. SERIAL_PROTOCOL(delta[Y_AXIS] - delta[X_AXIS] - 90);
  4445. SERIAL_EOL;
  4446. SERIAL_PROTOCOLPGM("SCARA step Cal - Theta:");
  4447. SERIAL_PROTOCOL(delta[X_AXIS] / 90 * planner.axis_steps_per_mm[X_AXIS]);
  4448. SERIAL_PROTOCOLPGM(" Psi+Theta:");
  4449. SERIAL_PROTOCOL((delta[Y_AXIS] - delta[X_AXIS]) / 90 * planner.axis_steps_per_mm[Y_AXIS]);
  4450. SERIAL_EOL; SERIAL_EOL;
  4451. #endif
  4452. }
  4453. /**
  4454. * M114: Output current position to serial port
  4455. */
  4456. inline void gcode_M114() { report_current_position(); }
  4457. /**
  4458. * M115: Capabilities string
  4459. */
  4460. inline void gcode_M115() {
  4461. SERIAL_PROTOCOLPGM(MSG_M115_REPORT);
  4462. }
  4463. /**
  4464. * M117: Set LCD Status Message
  4465. */
  4466. inline void gcode_M117() {
  4467. lcd_setstatus(current_command_args);
  4468. }
  4469. /**
  4470. * M119: Output endstop states to serial output
  4471. */
  4472. inline void gcode_M119() { endstops.M119(); }
  4473. /**
  4474. * M120: Enable endstops and set non-homing endstop state to "enabled"
  4475. */
  4476. inline void gcode_M120() { endstops.enable_globally(true); }
  4477. /**
  4478. * M121: Disable endstops and set non-homing endstop state to "disabled"
  4479. */
  4480. inline void gcode_M121() { endstops.enable_globally(false); }
  4481. #if ENABLED(BLINKM)
  4482. /**
  4483. * M150: Set Status LED Color - Use R-U-B for R-G-B
  4484. */
  4485. inline void gcode_M150() {
  4486. SendColors(
  4487. code_seen('R') ? code_value_byte() : 0,
  4488. code_seen('U') ? code_value_byte() : 0,
  4489. code_seen('B') ? code_value_byte() : 0
  4490. );
  4491. }
  4492. #endif // BLINKM
  4493. #if ENABLED(EXPERIMENTAL_I2CBUS)
  4494. /**
  4495. * M155: Send data to a I2C slave device
  4496. *
  4497. * This is a PoC, the formating and arguments for the GCODE will
  4498. * change to be more compatible, the current proposal is:
  4499. *
  4500. * M155 A<slave device address base 10> ; Sets the I2C slave address the data will be sent to
  4501. *
  4502. * M155 B<byte-1 value in base 10>
  4503. * M155 B<byte-2 value in base 10>
  4504. * M155 B<byte-3 value in base 10>
  4505. *
  4506. * M155 S1 ; Send the buffered data and reset the buffer
  4507. * M155 R1 ; Reset the buffer without sending data
  4508. *
  4509. */
  4510. inline void gcode_M155() {
  4511. // Set the target address
  4512. if (code_seen('A')) i2c.address(code_value_byte());
  4513. // Add a new byte to the buffer
  4514. if (code_seen('B')) i2c.addbyte(code_value_byte());
  4515. // Flush the buffer to the bus
  4516. if (code_seen('S')) i2c.send();
  4517. // Reset and rewind the buffer
  4518. else if (code_seen('R')) i2c.reset();
  4519. }
  4520. /**
  4521. * M156: Request X bytes from I2C slave device
  4522. *
  4523. * Usage: M156 A<slave device address base 10> B<number of bytes>
  4524. */
  4525. inline void gcode_M156() {
  4526. if (code_seen('A')) i2c.address(code_value_byte());
  4527. uint8_t bytes = code_seen('B') ? code_value_byte() : 1;
  4528. if (i2c.addr && bytes && bytes <= TWIBUS_BUFFER_SIZE) {
  4529. i2c.relay(bytes);
  4530. }
  4531. else {
  4532. SERIAL_ERROR_START;
  4533. SERIAL_ERRORLN("Bad i2c request");
  4534. }
  4535. }
  4536. #endif // EXPERIMENTAL_I2CBUS
  4537. /**
  4538. * M200: Set filament diameter and set E axis units to cubic units
  4539. *
  4540. * T<extruder> - Optional extruder number. Current extruder if omitted.
  4541. * D<linear> - Diameter of the filament. Use "D0" to switch back to linear units on the E axis.
  4542. */
  4543. inline void gcode_M200() {
  4544. if (get_target_extruder_from_command(200)) return;
  4545. if (code_seen('D')) {
  4546. // setting any extruder filament size disables volumetric on the assumption that
  4547. // slicers either generate in extruder values as cubic mm or as as filament feeds
  4548. // for all extruders
  4549. volumetric_enabled = (code_value_linear_units() != 0.0);
  4550. if (volumetric_enabled) {
  4551. filament_size[target_extruder] = code_value_linear_units();
  4552. // make sure all extruders have some sane value for the filament size
  4553. for (uint8_t i = 0; i < COUNT(filament_size); i++)
  4554. if (! filament_size[i]) filament_size[i] = DEFAULT_NOMINAL_FILAMENT_DIA;
  4555. }
  4556. }
  4557. else {
  4558. //reserved for setting filament diameter via UFID or filament measuring device
  4559. return;
  4560. }
  4561. calculate_volumetric_multipliers();
  4562. }
  4563. /**
  4564. * M201: Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000)
  4565. */
  4566. inline void gcode_M201() {
  4567. LOOP_XYZE(i) {
  4568. if (code_seen(axis_codes[i])) {
  4569. planner.max_acceleration_mm_per_s2[i] = code_value_axis_units(i);
  4570. }
  4571. }
  4572. // steps per sq second need to be updated to agree with the units per sq second (as they are what is used in the planner)
  4573. planner.reset_acceleration_rates();
  4574. }
  4575. #if 0 // Not used for Sprinter/grbl gen6
  4576. inline void gcode_M202() {
  4577. LOOP_XYZE(i) {
  4578. if (code_seen(axis_codes[i])) axis_travel_steps_per_sqr_second[i] = code_value_axis_units(i) * planner.axis_steps_per_mm[i];
  4579. }
  4580. }
  4581. #endif
  4582. /**
  4583. * M203: Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in units/sec
  4584. */
  4585. inline void gcode_M203() {
  4586. LOOP_XYZE(i)
  4587. if (code_seen(axis_codes[i]))
  4588. planner.max_feedrate_mm_s[i] = code_value_axis_units(i);
  4589. }
  4590. /**
  4591. * M204: Set Accelerations in units/sec^2 (M204 P1200 R3000 T3000)
  4592. *
  4593. * P = Printing moves
  4594. * R = Retract only (no X, Y, Z) moves
  4595. * T = Travel (non printing) moves
  4596. *
  4597. * Also sets minimum segment time in ms (B20000) to prevent buffer under-runs and M20 minimum feedrate
  4598. */
  4599. inline void gcode_M204() {
  4600. if (code_seen('S')) { // Kept for legacy compatibility. Should NOT BE USED for new developments.
  4601. planner.travel_acceleration = planner.acceleration = code_value_linear_units();
  4602. SERIAL_ECHOLNPAIR("Setting Print and Travel Acceleration: ", planner.acceleration);
  4603. }
  4604. if (code_seen('P')) {
  4605. planner.acceleration = code_value_linear_units();
  4606. SERIAL_ECHOLNPAIR("Setting Print Acceleration: ", planner.acceleration);
  4607. }
  4608. if (code_seen('R')) {
  4609. planner.retract_acceleration = code_value_linear_units();
  4610. SERIAL_ECHOLNPAIR("Setting Retract Acceleration: ", planner.retract_acceleration);
  4611. }
  4612. if (code_seen('T')) {
  4613. planner.travel_acceleration = code_value_linear_units();
  4614. SERIAL_ECHOLNPAIR("Setting Travel Acceleration: ", planner.travel_acceleration);
  4615. }
  4616. }
  4617. /**
  4618. * M205: Set Advanced Settings
  4619. *
  4620. * S = Min Feed Rate (units/s)
  4621. * T = Min Travel Feed Rate (units/s)
  4622. * B = Min Segment Time (µs)
  4623. * X = Max XY Jerk (units/sec^2)
  4624. * Z = Max Z Jerk (units/sec^2)
  4625. * E = Max E Jerk (units/sec^2)
  4626. */
  4627. inline void gcode_M205() {
  4628. if (code_seen('S')) planner.min_feedrate_mm_s = code_value_linear_units();
  4629. if (code_seen('T')) planner.min_travel_feedrate_mm_s = code_value_linear_units();
  4630. if (code_seen('B')) planner.min_segment_time = code_value_millis();
  4631. if (code_seen('X')) planner.max_xy_jerk = code_value_linear_units();
  4632. if (code_seen('Z')) planner.max_z_jerk = code_value_axis_units(Z_AXIS);
  4633. if (code_seen('E')) planner.max_e_jerk = code_value_axis_units(E_AXIS);
  4634. }
  4635. /**
  4636. * M206: Set Additional Homing Offset (X Y Z). SCARA aliases T=X, P=Y
  4637. */
  4638. inline void gcode_M206() {
  4639. LOOP_XYZ(i)
  4640. if (code_seen(axis_codes[i]))
  4641. set_home_offset((AxisEnum)i, code_value_axis_units(i));
  4642. #if ENABLED(SCARA)
  4643. if (code_seen('T')) set_home_offset(X_AXIS, code_value_axis_units(X_AXIS)); // Theta
  4644. if (code_seen('P')) set_home_offset(Y_AXIS, code_value_axis_units(Y_AXIS)); // Psi
  4645. #endif
  4646. SYNC_PLAN_POSITION_KINEMATIC();
  4647. report_current_position();
  4648. }
  4649. #if ENABLED(DELTA)
  4650. /**
  4651. * M665: Set delta configurations
  4652. *
  4653. * L = diagonal rod
  4654. * R = delta radius
  4655. * S = segments per second
  4656. * A = Alpha (Tower 1) diagonal rod trim
  4657. * B = Beta (Tower 2) diagonal rod trim
  4658. * C = Gamma (Tower 3) diagonal rod trim
  4659. */
  4660. inline void gcode_M665() {
  4661. if (code_seen('L')) delta_diagonal_rod = code_value_linear_units();
  4662. if (code_seen('R')) delta_radius = code_value_linear_units();
  4663. if (code_seen('S')) delta_segments_per_second = code_value_float();
  4664. if (code_seen('A')) delta_diagonal_rod_trim_tower_1 = code_value_linear_units();
  4665. if (code_seen('B')) delta_diagonal_rod_trim_tower_2 = code_value_linear_units();
  4666. if (code_seen('C')) delta_diagonal_rod_trim_tower_3 = code_value_linear_units();
  4667. recalc_delta_settings(delta_radius, delta_diagonal_rod);
  4668. }
  4669. /**
  4670. * M666: Set delta endstop adjustment
  4671. */
  4672. inline void gcode_M666() {
  4673. #if ENABLED(DEBUG_LEVELING_FEATURE)
  4674. if (DEBUGGING(LEVELING)) {
  4675. SERIAL_ECHOLNPGM(">>> gcode_M666");
  4676. }
  4677. #endif
  4678. LOOP_XYZ(i) {
  4679. if (code_seen(axis_codes[i])) {
  4680. endstop_adj[i] = code_value_axis_units(i);
  4681. #if ENABLED(DEBUG_LEVELING_FEATURE)
  4682. if (DEBUGGING(LEVELING)) {
  4683. SERIAL_ECHOPGM("endstop_adj[");
  4684. SERIAL_ECHO(axis_codes[i]);
  4685. SERIAL_ECHOLNPAIR("] = ", endstop_adj[i]);
  4686. }
  4687. #endif
  4688. }
  4689. }
  4690. #if ENABLED(DEBUG_LEVELING_FEATURE)
  4691. if (DEBUGGING(LEVELING)) {
  4692. SERIAL_ECHOLNPGM("<<< gcode_M666");
  4693. }
  4694. #endif
  4695. }
  4696. #elif ENABLED(Z_DUAL_ENDSTOPS) // !DELTA && ENABLED(Z_DUAL_ENDSTOPS)
  4697. /**
  4698. * M666: For Z Dual Endstop setup, set z axis offset to the z2 axis.
  4699. */
  4700. inline void gcode_M666() {
  4701. if (code_seen('Z')) z_endstop_adj = code_value_axis_units(Z_AXIS);
  4702. SERIAL_ECHOLNPAIR("Z Endstop Adjustment set to (mm):", z_endstop_adj);
  4703. }
  4704. #endif // !DELTA && Z_DUAL_ENDSTOPS
  4705. #if ENABLED(FWRETRACT)
  4706. /**
  4707. * M207: Set firmware retraction values
  4708. *
  4709. * S[+units] retract_length
  4710. * W[+units] retract_length_swap (multi-extruder)
  4711. * F[units/min] retract_feedrate_mm_s
  4712. * Z[units] retract_zlift
  4713. */
  4714. inline void gcode_M207() {
  4715. if (code_seen('S')) retract_length = code_value_axis_units(E_AXIS);
  4716. if (code_seen('F')) retract_feedrate_mm_s = MMM_TO_MMS(code_value_axis_units(E_AXIS));
  4717. if (code_seen('Z')) retract_zlift = code_value_axis_units(Z_AXIS);
  4718. #if EXTRUDERS > 1
  4719. if (code_seen('W')) retract_length_swap = code_value_axis_units(E_AXIS);
  4720. #endif
  4721. }
  4722. /**
  4723. * M208: Set firmware un-retraction values
  4724. *
  4725. * S[+units] retract_recover_length (in addition to M207 S*)
  4726. * W[+units] retract_recover_length_swap (multi-extruder)
  4727. * F[units/min] retract_recover_feedrate_mm_s
  4728. */
  4729. inline void gcode_M208() {
  4730. if (code_seen('S')) retract_recover_length = code_value_axis_units(E_AXIS);
  4731. if (code_seen('F')) retract_recover_feedrate_mm_s = MMM_TO_MMS(code_value_axis_units(E_AXIS));
  4732. #if EXTRUDERS > 1
  4733. if (code_seen('W')) retract_recover_length_swap = code_value_axis_units(E_AXIS);
  4734. #endif
  4735. }
  4736. /**
  4737. * M209: Enable automatic retract (M209 S1)
  4738. * detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction.
  4739. */
  4740. inline void gcode_M209() {
  4741. if (code_seen('S')) {
  4742. autoretract_enabled = code_value_bool();
  4743. for (int i = 0; i < EXTRUDERS; i++) retracted[i] = false;
  4744. }
  4745. }
  4746. #endif // FWRETRACT
  4747. /**
  4748. * M211: Enable, Disable, and/or Report software endstops
  4749. *
  4750. * Usage: M211 S1 to enable, M211 S0 to disable, M211 alone for report
  4751. */
  4752. inline void gcode_M211() {
  4753. SERIAL_ECHO_START;
  4754. #if ENABLED(min_software_endstops) || ENABLED(max_software_endstops)
  4755. if (code_seen('S')) soft_endstops_enabled = code_value_bool();
  4756. #endif
  4757. #if ENABLED(min_software_endstops) || ENABLED(max_software_endstops)
  4758. SERIAL_ECHOPGM(MSG_SOFT_ENDSTOPS ": ");
  4759. serialprintPGM(soft_endstops_enabled ? PSTR(MSG_ON) : PSTR(MSG_OFF));
  4760. #else
  4761. SERIAL_ECHOPGM(MSG_SOFT_ENDSTOPS ": " MSG_OFF);
  4762. #endif
  4763. SERIAL_ECHOPGM(" " MSG_SOFT_MIN ": ");
  4764. SERIAL_ECHOPAIR( MSG_X, soft_endstop_min[X_AXIS]);
  4765. SERIAL_ECHOPAIR(" " MSG_Y, soft_endstop_min[Y_AXIS]);
  4766. SERIAL_ECHOPAIR(" " MSG_Z, soft_endstop_min[Z_AXIS]);
  4767. SERIAL_ECHOPGM(" " MSG_SOFT_MAX ": ");
  4768. SERIAL_ECHOPAIR( MSG_X, soft_endstop_max[X_AXIS]);
  4769. SERIAL_ECHOPAIR(" " MSG_Y, soft_endstop_max[Y_AXIS]);
  4770. SERIAL_ECHOLNPAIR(" " MSG_Z, soft_endstop_max[Z_AXIS]);
  4771. }
  4772. #if HOTENDS > 1
  4773. /**
  4774. * M218 - set hotend offset (in linear units)
  4775. *
  4776. * T<tool>
  4777. * X<xoffset>
  4778. * Y<yoffset>
  4779. * Z<zoffset> - Available with DUAL_X_CARRIAGE and SWITCHING_EXTRUDER
  4780. */
  4781. inline void gcode_M218() {
  4782. if (get_target_extruder_from_command(218)) return;
  4783. if (code_seen('X')) hotend_offset[X_AXIS][target_extruder] = code_value_axis_units(X_AXIS);
  4784. if (code_seen('Y')) hotend_offset[Y_AXIS][target_extruder] = code_value_axis_units(Y_AXIS);
  4785. #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(SWITCHING_EXTRUDER)
  4786. if (code_seen('Z')) hotend_offset[Z_AXIS][target_extruder] = code_value_axis_units(Z_AXIS);
  4787. #endif
  4788. SERIAL_ECHO_START;
  4789. SERIAL_ECHOPGM(MSG_HOTEND_OFFSET);
  4790. HOTEND_LOOP() {
  4791. SERIAL_CHAR(' ');
  4792. SERIAL_ECHO(hotend_offset[X_AXIS][e]);
  4793. SERIAL_CHAR(',');
  4794. SERIAL_ECHO(hotend_offset[Y_AXIS][e]);
  4795. #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(SWITCHING_EXTRUDER)
  4796. SERIAL_CHAR(',');
  4797. SERIAL_ECHO(hotend_offset[Z_AXIS][e]);
  4798. #endif
  4799. }
  4800. SERIAL_EOL;
  4801. }
  4802. #endif // HOTENDS > 1
  4803. /**
  4804. * M220: Set speed percentage factor, aka "Feed Rate" (M220 S95)
  4805. */
  4806. inline void gcode_M220() {
  4807. if (code_seen('S')) feedrate_percentage = code_value_int();
  4808. }
  4809. /**
  4810. * M221: Set extrusion percentage (M221 T0 S95)
  4811. */
  4812. inline void gcode_M221() {
  4813. if (get_target_extruder_from_command(221)) return;
  4814. if (code_seen('S'))
  4815. flow_percentage[target_extruder] = code_value_int();
  4816. }
  4817. /**
  4818. * M226: Wait until the specified pin reaches the state required (M226 P<pin> S<state>)
  4819. */
  4820. inline void gcode_M226() {
  4821. if (code_seen('P')) {
  4822. int pin_number = code_value_int();
  4823. int pin_state = code_seen('S') ? code_value_int() : -1; // required pin state - default is inverted
  4824. if (pin_state >= -1 && pin_state <= 1) {
  4825. for (uint8_t i = 0; i < COUNT(sensitive_pins); i++) {
  4826. if (sensitive_pins[i] == pin_number) {
  4827. pin_number = -1;
  4828. break;
  4829. }
  4830. }
  4831. if (pin_number > -1) {
  4832. int target = LOW;
  4833. stepper.synchronize();
  4834. pinMode(pin_number, INPUT);
  4835. switch (pin_state) {
  4836. case 1:
  4837. target = HIGH;
  4838. break;
  4839. case 0:
  4840. target = LOW;
  4841. break;
  4842. case -1:
  4843. target = !digitalRead(pin_number);
  4844. break;
  4845. }
  4846. while (digitalRead(pin_number) != target) idle();
  4847. } // pin_number > -1
  4848. } // pin_state -1 0 1
  4849. } // code_seen('P')
  4850. }
  4851. #if HAS_SERVOS
  4852. /**
  4853. * M280: Get or set servo position. P<index> [S<angle>]
  4854. */
  4855. inline void gcode_M280() {
  4856. if (!code_seen('P')) return;
  4857. int servo_index = code_value_int();
  4858. if (servo_index >= 0 && servo_index < NUM_SERVOS) {
  4859. if (code_seen('S'))
  4860. MOVE_SERVO(servo_index, code_value_int());
  4861. else {
  4862. SERIAL_ECHO_START;
  4863. SERIAL_ECHOPGM(" Servo ");
  4864. SERIAL_ECHO(servo_index);
  4865. SERIAL_ECHOPGM(": ");
  4866. SERIAL_ECHOLN(servo[servo_index].read());
  4867. }
  4868. }
  4869. else {
  4870. SERIAL_ERROR_START;
  4871. SERIAL_ERROR("Servo ");
  4872. SERIAL_ERROR(servo_index);
  4873. SERIAL_ERRORLN(" out of range");
  4874. }
  4875. }
  4876. #endif // HAS_SERVOS
  4877. #if HAS_BUZZER
  4878. /**
  4879. * M300: Play beep sound S<frequency Hz> P<duration ms>
  4880. */
  4881. inline void gcode_M300() {
  4882. uint16_t const frequency = code_seen('S') ? code_value_ushort() : 260;
  4883. uint16_t duration = code_seen('P') ? code_value_ushort() : 1000;
  4884. // Limits the tone duration to 0-5 seconds.
  4885. NOMORE(duration, 5000);
  4886. BUZZ(duration, frequency);
  4887. }
  4888. #endif // HAS_BUZZER
  4889. #if ENABLED(PIDTEMP)
  4890. /**
  4891. * M301: Set PID parameters P I D (and optionally C, L)
  4892. *
  4893. * P[float] Kp term
  4894. * I[float] Ki term (unscaled)
  4895. * D[float] Kd term (unscaled)
  4896. *
  4897. * With PID_EXTRUSION_SCALING:
  4898. *
  4899. * C[float] Kc term
  4900. * L[float] LPQ length
  4901. */
  4902. inline void gcode_M301() {
  4903. // multi-extruder PID patch: M301 updates or prints a single extruder's PID values
  4904. // default behaviour (omitting E parameter) is to update for extruder 0 only
  4905. int e = code_seen('E') ? code_value_int() : 0; // extruder being updated
  4906. if (e < HOTENDS) { // catch bad input value
  4907. if (code_seen('P')) PID_PARAM(Kp, e) = code_value_float();
  4908. if (code_seen('I')) PID_PARAM(Ki, e) = scalePID_i(code_value_float());
  4909. if (code_seen('D')) PID_PARAM(Kd, e) = scalePID_d(code_value_float());
  4910. #if ENABLED(PID_EXTRUSION_SCALING)
  4911. if (code_seen('C')) PID_PARAM(Kc, e) = code_value_float();
  4912. if (code_seen('L')) lpq_len = code_value_float();
  4913. NOMORE(lpq_len, LPQ_MAX_LEN);
  4914. #endif
  4915. thermalManager.updatePID();
  4916. SERIAL_ECHO_START;
  4917. #if ENABLED(PID_PARAMS_PER_HOTEND)
  4918. SERIAL_ECHOPGM(" e:"); // specify extruder in serial output
  4919. SERIAL_ECHO(e);
  4920. #endif // PID_PARAMS_PER_HOTEND
  4921. SERIAL_ECHOPGM(" p:");
  4922. SERIAL_ECHO(PID_PARAM(Kp, e));
  4923. SERIAL_ECHOPGM(" i:");
  4924. SERIAL_ECHO(unscalePID_i(PID_PARAM(Ki, e)));
  4925. SERIAL_ECHOPGM(" d:");
  4926. SERIAL_ECHO(unscalePID_d(PID_PARAM(Kd, e)));
  4927. #if ENABLED(PID_EXTRUSION_SCALING)
  4928. SERIAL_ECHOPGM(" c:");
  4929. //Kc does not have scaling applied above, or in resetting defaults
  4930. SERIAL_ECHO(PID_PARAM(Kc, e));
  4931. #endif
  4932. SERIAL_EOL;
  4933. }
  4934. else {
  4935. SERIAL_ERROR_START;
  4936. SERIAL_ERRORLN(MSG_INVALID_EXTRUDER);
  4937. }
  4938. }
  4939. #endif // PIDTEMP
  4940. #if ENABLED(PIDTEMPBED)
  4941. inline void gcode_M304() {
  4942. if (code_seen('P')) thermalManager.bedKp = code_value_float();
  4943. if (code_seen('I')) thermalManager.bedKi = scalePID_i(code_value_float());
  4944. if (code_seen('D')) thermalManager.bedKd = scalePID_d(code_value_float());
  4945. thermalManager.updatePID();
  4946. SERIAL_ECHO_START;
  4947. SERIAL_ECHOPGM(" p:");
  4948. SERIAL_ECHO(thermalManager.bedKp);
  4949. SERIAL_ECHOPGM(" i:");
  4950. SERIAL_ECHO(unscalePID_i(thermalManager.bedKi));
  4951. SERIAL_ECHOPGM(" d:");
  4952. SERIAL_ECHOLN(unscalePID_d(thermalManager.bedKd));
  4953. }
  4954. #endif // PIDTEMPBED
  4955. #if defined(CHDK) || HAS_PHOTOGRAPH
  4956. /**
  4957. * M240: Trigger a camera by emulating a Canon RC-1
  4958. * See http://www.doc-diy.net/photo/rc-1_hacked/
  4959. */
  4960. inline void gcode_M240() {
  4961. #ifdef CHDK
  4962. OUT_WRITE(CHDK, HIGH);
  4963. chdkHigh = millis();
  4964. chdkActive = true;
  4965. #elif HAS_PHOTOGRAPH
  4966. const uint8_t NUM_PULSES = 16;
  4967. const float PULSE_LENGTH = 0.01524;
  4968. for (int i = 0; i < NUM_PULSES; i++) {
  4969. WRITE(PHOTOGRAPH_PIN, HIGH);
  4970. _delay_ms(PULSE_LENGTH);
  4971. WRITE(PHOTOGRAPH_PIN, LOW);
  4972. _delay_ms(PULSE_LENGTH);
  4973. }
  4974. delay(7.33);
  4975. for (int i = 0; i < NUM_PULSES; i++) {
  4976. WRITE(PHOTOGRAPH_PIN, HIGH);
  4977. _delay_ms(PULSE_LENGTH);
  4978. WRITE(PHOTOGRAPH_PIN, LOW);
  4979. _delay_ms(PULSE_LENGTH);
  4980. }
  4981. #endif // !CHDK && HAS_PHOTOGRAPH
  4982. }
  4983. #endif // CHDK || PHOTOGRAPH_PIN
  4984. #if HAS_LCD_CONTRAST
  4985. /**
  4986. * M250: Read and optionally set the LCD contrast
  4987. */
  4988. inline void gcode_M250() {
  4989. if (code_seen('C')) set_lcd_contrast(code_value_int());
  4990. SERIAL_PROTOCOLPGM("lcd contrast value: ");
  4991. SERIAL_PROTOCOL(lcd_contrast);
  4992. SERIAL_EOL;
  4993. }
  4994. #endif // HAS_LCD_CONTRAST
  4995. #if ENABLED(PREVENT_COLD_EXTRUSION)
  4996. /**
  4997. * M302: Allow cold extrudes, or set the minimum extrude temperature
  4998. *
  4999. * S<temperature> sets the minimum extrude temperature
  5000. * P<bool> enables (1) or disables (0) cold extrusion
  5001. *
  5002. * Examples:
  5003. *
  5004. * M302 ; report current cold extrusion state
  5005. * M302 P0 ; enable cold extrusion checking
  5006. * M302 P1 ; disables cold extrusion checking
  5007. * M302 S0 ; always allow extrusion (disables checking)
  5008. * M302 S170 ; only allow extrusion above 170
  5009. * M302 S170 P1 ; set min extrude temp to 170 but leave disabled
  5010. */
  5011. inline void gcode_M302() {
  5012. bool seen_S = code_seen('S');
  5013. if (seen_S) {
  5014. thermalManager.extrude_min_temp = code_value_temp_abs();
  5015. thermalManager.allow_cold_extrude = (thermalManager.extrude_min_temp == 0);
  5016. }
  5017. if (code_seen('P'))
  5018. thermalManager.allow_cold_extrude = (thermalManager.extrude_min_temp == 0) || code_value_bool();
  5019. else if (!seen_S) {
  5020. // Report current state
  5021. SERIAL_ECHO_START;
  5022. SERIAL_ECHOPAIR("Cold extrudes are ", (thermalManager.allow_cold_extrude ? "en" : "dis"));
  5023. SERIAL_ECHOPAIR("abled (min temp ", int(thermalManager.extrude_min_temp + 0.5));
  5024. SERIAL_ECHOLNPGM("C)");
  5025. }
  5026. }
  5027. #endif // PREVENT_COLD_EXTRUSION
  5028. /**
  5029. * M303: PID relay autotune
  5030. *
  5031. * S<temperature> sets the target temperature. (default 150C)
  5032. * E<extruder> (-1 for the bed) (default 0)
  5033. * C<cycles>
  5034. * U<bool> with a non-zero value will apply the result to current settings
  5035. */
  5036. inline void gcode_M303() {
  5037. #if HAS_PID_HEATING
  5038. int e = code_seen('E') ? code_value_int() : 0;
  5039. int c = code_seen('C') ? code_value_int() : 5;
  5040. bool u = code_seen('U') && code_value_bool();
  5041. float temp = code_seen('S') ? code_value_temp_abs() : (e < 0 ? 70.0 : 150.0);
  5042. if (e >= 0 && e < HOTENDS)
  5043. target_extruder = e;
  5044. KEEPALIVE_STATE(NOT_BUSY); // don't send "busy: processing" messages during autotune output
  5045. thermalManager.PID_autotune(temp, e, c, u);
  5046. KEEPALIVE_STATE(IN_HANDLER);
  5047. #else
  5048. SERIAL_ERROR_START;
  5049. SERIAL_ERRORLNPGM(MSG_ERR_M303_DISABLED);
  5050. #endif
  5051. }
  5052. #if ENABLED(SCARA)
  5053. bool SCARA_move_to_cal(uint8_t delta_x, uint8_t delta_y) {
  5054. //SoftEndsEnabled = false; // Ignore soft endstops during calibration
  5055. //SERIAL_ECHOLNPGM(" Soft endstops disabled");
  5056. if (IsRunning()) {
  5057. //gcode_get_destination(); // For X Y Z E F
  5058. delta[X_AXIS] = delta_x;
  5059. delta[Y_AXIS] = delta_y;
  5060. forward_kinematics_SCARA(delta);
  5061. destination[X_AXIS] = delta[X_AXIS] / axis_scaling[X_AXIS];
  5062. destination[Y_AXIS] = delta[Y_AXIS] / axis_scaling[Y_AXIS];
  5063. prepare_move_to_destination();
  5064. //ok_to_send();
  5065. return true;
  5066. }
  5067. return false;
  5068. }
  5069. /**
  5070. * M360: SCARA calibration: Move to cal-position ThetaA (0 deg calibration)
  5071. */
  5072. inline bool gcode_M360() {
  5073. SERIAL_ECHOLNPGM(" Cal: Theta 0");
  5074. return SCARA_move_to_cal(0, 120);
  5075. }
  5076. /**
  5077. * M361: SCARA calibration: Move to cal-position ThetaB (90 deg calibration - steps per degree)
  5078. */
  5079. inline bool gcode_M361() {
  5080. SERIAL_ECHOLNPGM(" Cal: Theta 90");
  5081. return SCARA_move_to_cal(90, 130);
  5082. }
  5083. /**
  5084. * M362: SCARA calibration: Move to cal-position PsiA (0 deg calibration)
  5085. */
  5086. inline bool gcode_M362() {
  5087. SERIAL_ECHOLNPGM(" Cal: Psi 0");
  5088. return SCARA_move_to_cal(60, 180);
  5089. }
  5090. /**
  5091. * M363: SCARA calibration: Move to cal-position PsiB (90 deg calibration - steps per degree)
  5092. */
  5093. inline bool gcode_M363() {
  5094. SERIAL_ECHOLNPGM(" Cal: Psi 90");
  5095. return SCARA_move_to_cal(50, 90);
  5096. }
  5097. /**
  5098. * M364: SCARA calibration: Move to cal-position PSIC (90 deg to Theta calibration position)
  5099. */
  5100. inline bool gcode_M364() {
  5101. SERIAL_ECHOLNPGM(" Cal: Theta-Psi 90");
  5102. return SCARA_move_to_cal(45, 135);
  5103. }
  5104. /**
  5105. * M365: SCARA calibration: Scaling factor, X, Y, Z axis
  5106. */
  5107. inline void gcode_M365() {
  5108. LOOP_XYZ(i)
  5109. if (code_seen(axis_codes[i]))
  5110. axis_scaling[i] = code_value_float();
  5111. }
  5112. #endif // SCARA
  5113. #if ENABLED(EXT_SOLENOID)
  5114. void enable_solenoid(uint8_t num) {
  5115. switch (num) {
  5116. case 0:
  5117. OUT_WRITE(SOL0_PIN, HIGH);
  5118. break;
  5119. #if HAS_SOLENOID_1
  5120. case 1:
  5121. OUT_WRITE(SOL1_PIN, HIGH);
  5122. break;
  5123. #endif
  5124. #if HAS_SOLENOID_2
  5125. case 2:
  5126. OUT_WRITE(SOL2_PIN, HIGH);
  5127. break;
  5128. #endif
  5129. #if HAS_SOLENOID_3
  5130. case 3:
  5131. OUT_WRITE(SOL3_PIN, HIGH);
  5132. break;
  5133. #endif
  5134. default:
  5135. SERIAL_ECHO_START;
  5136. SERIAL_ECHOLNPGM(MSG_INVALID_SOLENOID);
  5137. break;
  5138. }
  5139. }
  5140. void enable_solenoid_on_active_extruder() { enable_solenoid(active_extruder); }
  5141. void disable_all_solenoids() {
  5142. OUT_WRITE(SOL0_PIN, LOW);
  5143. OUT_WRITE(SOL1_PIN, LOW);
  5144. OUT_WRITE(SOL2_PIN, LOW);
  5145. OUT_WRITE(SOL3_PIN, LOW);
  5146. }
  5147. /**
  5148. * M380: Enable solenoid on the active extruder
  5149. */
  5150. inline void gcode_M380() { enable_solenoid_on_active_extruder(); }
  5151. /**
  5152. * M381: Disable all solenoids
  5153. */
  5154. inline void gcode_M381() { disable_all_solenoids(); }
  5155. #endif // EXT_SOLENOID
  5156. /**
  5157. * M400: Finish all moves
  5158. */
  5159. inline void gcode_M400() { stepper.synchronize(); }
  5160. #if HAS_BED_PROBE
  5161. /**
  5162. * M401: Engage Z Servo endstop if available
  5163. */
  5164. inline void gcode_M401() { DEPLOY_PROBE(); }
  5165. /**
  5166. * M402: Retract Z Servo endstop if enabled
  5167. */
  5168. inline void gcode_M402() { STOW_PROBE(); }
  5169. #endif // HAS_BED_PROBE
  5170. #if ENABLED(FILAMENT_WIDTH_SENSOR)
  5171. /**
  5172. * M404: Display or set (in current units) the nominal filament width (3mm, 1.75mm ) W<3.0>
  5173. */
  5174. inline void gcode_M404() {
  5175. if (code_seen('W')) {
  5176. filament_width_nominal = code_value_linear_units();
  5177. }
  5178. else {
  5179. SERIAL_PROTOCOLPGM("Filament dia (nominal mm):");
  5180. SERIAL_PROTOCOLLN(filament_width_nominal);
  5181. }
  5182. }
  5183. /**
  5184. * M405: Turn on filament sensor for control
  5185. */
  5186. inline void gcode_M405() {
  5187. // This is technically a linear measurement, but since it's quantized to centimeters and is a different unit than
  5188. // everything else, it uses code_value_int() instead of code_value_linear_units().
  5189. if (code_seen('D')) meas_delay_cm = code_value_int();
  5190. NOMORE(meas_delay_cm, MAX_MEASUREMENT_DELAY);
  5191. if (filwidth_delay_index2 == -1) { // Initialize the ring buffer if not done since startup
  5192. int temp_ratio = thermalManager.widthFil_to_size_ratio();
  5193. for (uint8_t i = 0; i < COUNT(measurement_delay); ++i)
  5194. measurement_delay[i] = temp_ratio - 100; // Subtract 100 to scale within a signed byte
  5195. filwidth_delay_index1 = filwidth_delay_index2 = 0;
  5196. }
  5197. filament_sensor = true;
  5198. //SERIAL_PROTOCOLPGM("Filament dia (measured mm):");
  5199. //SERIAL_PROTOCOL(filament_width_meas);
  5200. //SERIAL_PROTOCOLPGM("Extrusion ratio(%):");
  5201. //SERIAL_PROTOCOL(flow_percentage[active_extruder]);
  5202. }
  5203. /**
  5204. * M406: Turn off filament sensor for control
  5205. */
  5206. inline void gcode_M406() { filament_sensor = false; }
  5207. /**
  5208. * M407: Get measured filament diameter on serial output
  5209. */
  5210. inline void gcode_M407() {
  5211. SERIAL_PROTOCOLPGM("Filament dia (measured mm):");
  5212. SERIAL_PROTOCOLLN(filament_width_meas);
  5213. }
  5214. #endif // FILAMENT_WIDTH_SENSOR
  5215. void quickstop_stepper() {
  5216. stepper.quick_stop();
  5217. #if DISABLED(SCARA)
  5218. stepper.synchronize();
  5219. LOOP_XYZ(i) set_current_from_steppers_for_axis((AxisEnum)i);
  5220. SYNC_PLAN_POSITION_KINEMATIC();
  5221. #endif
  5222. }
  5223. #if ENABLED(MESH_BED_LEVELING)
  5224. /**
  5225. * M420: Enable/Disable Mesh Bed Leveling
  5226. */
  5227. inline void gcode_M420() { if (code_seen('S') && code_has_value()) mbl.set_has_mesh(code_value_bool()); }
  5228. /**
  5229. * M421: Set a single Mesh Bed Leveling Z coordinate
  5230. * Use either 'M421 X<linear> Y<linear> Z<linear>' or 'M421 I<xindex> J<yindex> Z<linear>'
  5231. */
  5232. inline void gcode_M421() {
  5233. int8_t px = 0, py = 0;
  5234. float z = 0;
  5235. bool hasX, hasY, hasZ, hasI, hasJ;
  5236. if ((hasX = code_seen('X'))) px = mbl.probe_index_x(code_value_axis_units(X_AXIS));
  5237. if ((hasY = code_seen('Y'))) py = mbl.probe_index_y(code_value_axis_units(Y_AXIS));
  5238. if ((hasI = code_seen('I'))) px = code_value_axis_units(X_AXIS);
  5239. if ((hasJ = code_seen('J'))) py = code_value_axis_units(Y_AXIS);
  5240. if ((hasZ = code_seen('Z'))) z = code_value_axis_units(Z_AXIS);
  5241. if (hasX && hasY && hasZ) {
  5242. if (px >= 0 && py >= 0)
  5243. mbl.set_z(px, py, z);
  5244. else {
  5245. SERIAL_ERROR_START;
  5246. SERIAL_ERRORLNPGM(MSG_ERR_MESH_XY);
  5247. }
  5248. }
  5249. else if (hasI && hasJ && hasZ) {
  5250. if (px >= 0 && px < MESH_NUM_X_POINTS && py >= 0 && py < MESH_NUM_Y_POINTS)
  5251. mbl.set_z(px, py, z);
  5252. else {
  5253. SERIAL_ERROR_START;
  5254. SERIAL_ERRORLNPGM(MSG_ERR_MESH_XY);
  5255. }
  5256. }
  5257. else {
  5258. SERIAL_ERROR_START;
  5259. SERIAL_ERRORLNPGM(MSG_ERR_M421_PARAMETERS);
  5260. }
  5261. }
  5262. #endif
  5263. /**
  5264. * M428: Set home_offset based on the distance between the
  5265. * current_position and the nearest "reference point."
  5266. * If an axis is past center its endstop position
  5267. * is the reference-point. Otherwise it uses 0. This allows
  5268. * the Z offset to be set near the bed when using a max endstop.
  5269. *
  5270. * M428 can't be used more than 2cm away from 0 or an endstop.
  5271. *
  5272. * Use M206 to set these values directly.
  5273. */
  5274. inline void gcode_M428() {
  5275. bool err = false;
  5276. LOOP_XYZ(i) {
  5277. if (axis_homed[i]) {
  5278. float base = (current_position[i] > (soft_endstop_min[i] + soft_endstop_max[i]) * 0.5) ? base_home_pos(i) : 0,
  5279. diff = current_position[i] - LOGICAL_POSITION(base, i);
  5280. if (diff > -20 && diff < 20) {
  5281. set_home_offset((AxisEnum)i, home_offset[i] - diff);
  5282. }
  5283. else {
  5284. SERIAL_ERROR_START;
  5285. SERIAL_ERRORLNPGM(MSG_ERR_M428_TOO_FAR);
  5286. LCD_ALERTMESSAGEPGM("Err: Too far!");
  5287. BUZZ(200, 40);
  5288. err = true;
  5289. break;
  5290. }
  5291. }
  5292. }
  5293. if (!err) {
  5294. SYNC_PLAN_POSITION_KINEMATIC();
  5295. report_current_position();
  5296. LCD_MESSAGEPGM(MSG_HOME_OFFSETS_APPLIED);
  5297. BUZZ(200, 659);
  5298. BUZZ(200, 698);
  5299. }
  5300. }
  5301. /**
  5302. * M500: Store settings in EEPROM
  5303. */
  5304. inline void gcode_M500() {
  5305. Config_StoreSettings();
  5306. }
  5307. /**
  5308. * M501: Read settings from EEPROM
  5309. */
  5310. inline void gcode_M501() {
  5311. Config_RetrieveSettings();
  5312. }
  5313. /**
  5314. * M502: Revert to default settings
  5315. */
  5316. inline void gcode_M502() {
  5317. Config_ResetDefault();
  5318. }
  5319. /**
  5320. * M503: print settings currently in memory
  5321. */
  5322. inline void gcode_M503() {
  5323. Config_PrintSettings(code_seen('S') && !code_value_bool());
  5324. }
  5325. #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
  5326. /**
  5327. * M540: Set whether SD card print should abort on endstop hit (M540 S<0|1>)
  5328. */
  5329. inline void gcode_M540() {
  5330. if (code_seen('S')) stepper.abort_on_endstop_hit = code_value_bool();
  5331. }
  5332. #endif // ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
  5333. #if HAS_BED_PROBE
  5334. inline void gcode_M851() {
  5335. SERIAL_ECHO_START;
  5336. SERIAL_ECHOPGM(MSG_ZPROBE_ZOFFSET);
  5337. SERIAL_CHAR(' ');
  5338. if (code_seen('Z')) {
  5339. float value = code_value_axis_units(Z_AXIS);
  5340. if (Z_PROBE_OFFSET_RANGE_MIN <= value && value <= Z_PROBE_OFFSET_RANGE_MAX) {
  5341. zprobe_zoffset = value;
  5342. SERIAL_ECHO(zprobe_zoffset);
  5343. }
  5344. else {
  5345. SERIAL_ECHOPGM(MSG_Z_MIN);
  5346. SERIAL_ECHO(Z_PROBE_OFFSET_RANGE_MIN);
  5347. SERIAL_CHAR(' ');
  5348. SERIAL_ECHOPGM(MSG_Z_MAX);
  5349. SERIAL_ECHO(Z_PROBE_OFFSET_RANGE_MAX);
  5350. }
  5351. }
  5352. else {
  5353. SERIAL_ECHOPAIR(": ", zprobe_zoffset);
  5354. }
  5355. SERIAL_EOL;
  5356. }
  5357. #endif // HAS_BED_PROBE
  5358. #if ENABLED(FILAMENT_CHANGE_FEATURE)
  5359. /**
  5360. * M600: Pause for filament change
  5361. *
  5362. * E[distance] - Retract the filament this far (negative value)
  5363. * Z[distance] - Move the Z axis by this distance
  5364. * X[position] - Move to this X position, with Y
  5365. * Y[position] - Move to this Y position, with X
  5366. * L[distance] - Retract distance for removal (manual reload)
  5367. *
  5368. * Default values are used for omitted arguments.
  5369. *
  5370. */
  5371. inline void gcode_M600() {
  5372. if (thermalManager.tooColdToExtrude(active_extruder)) {
  5373. SERIAL_ERROR_START;
  5374. SERIAL_ERRORLNPGM(MSG_TOO_COLD_FOR_M600);
  5375. return;
  5376. }
  5377. // Show initial message and wait for synchronize steppers
  5378. lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_INIT);
  5379. stepper.synchronize();
  5380. float lastpos[NUM_AXIS];
  5381. // Save current position of all axes
  5382. LOOP_XYZE(i)
  5383. lastpos[i] = destination[i] = current_position[i];
  5384. // Define runplan for move axes
  5385. #if ENABLED(DELTA)
  5386. #define RUNPLAN(RATE_MM_S) inverse_kinematics(destination); \
  5387. planner.buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], destination[E_AXIS], RATE_MM_S, active_extruder);
  5388. #else
  5389. #define RUNPLAN(RATE_MM_S) line_to_destination(RATE_MM_S);
  5390. #endif
  5391. KEEPALIVE_STATE(IN_HANDLER);
  5392. // Initial retract before move to filament change position
  5393. if (code_seen('E')) destination[E_AXIS] += code_value_axis_units(E_AXIS);
  5394. #if defined(FILAMENT_CHANGE_RETRACT_LENGTH) && FILAMENT_CHANGE_RETRACT_LENGTH > 0
  5395. else destination[E_AXIS] -= FILAMENT_CHANGE_RETRACT_LENGTH;
  5396. #endif
  5397. RUNPLAN(FILAMENT_CHANGE_RETRACT_FEEDRATE);
  5398. // Lift Z axis
  5399. float z_lift = code_seen('Z') ? code_value_axis_units(Z_AXIS) :
  5400. #if defined(FILAMENT_CHANGE_Z_ADD) && FILAMENT_CHANGE_Z_ADD > 0
  5401. FILAMENT_CHANGE_Z_ADD
  5402. #else
  5403. 0
  5404. #endif
  5405. ;
  5406. if (z_lift > 0) {
  5407. destination[Z_AXIS] += z_lift;
  5408. NOMORE(destination[Z_AXIS], Z_MAX_POS);
  5409. RUNPLAN(FILAMENT_CHANGE_Z_FEEDRATE);
  5410. }
  5411. // Move XY axes to filament exchange position
  5412. if (code_seen('X')) destination[X_AXIS] = code_value_axis_units(X_AXIS);
  5413. #ifdef FILAMENT_CHANGE_X_POS
  5414. else destination[X_AXIS] = FILAMENT_CHANGE_X_POS;
  5415. #endif
  5416. if (code_seen('Y')) destination[Y_AXIS] = code_value_axis_units(Y_AXIS);
  5417. #ifdef FILAMENT_CHANGE_Y_POS
  5418. else destination[Y_AXIS] = FILAMENT_CHANGE_Y_POS;
  5419. #endif
  5420. RUNPLAN(FILAMENT_CHANGE_XY_FEEDRATE);
  5421. stepper.synchronize();
  5422. lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_UNLOAD);
  5423. // Unload filament
  5424. if (code_seen('L')) destination[E_AXIS] += code_value_axis_units(E_AXIS);
  5425. #if defined(FILAMENT_CHANGE_UNLOAD_LENGTH) && FILAMENT_CHANGE_UNLOAD_LENGTH > 0
  5426. else destination[E_AXIS] -= FILAMENT_CHANGE_UNLOAD_LENGTH;
  5427. #endif
  5428. RUNPLAN(FILAMENT_CHANGE_UNLOAD_FEEDRATE);
  5429. // Synchronize steppers and then disable extruders steppers for manual filament changing
  5430. stepper.synchronize();
  5431. disable_e0();
  5432. disable_e1();
  5433. disable_e2();
  5434. disable_e3();
  5435. delay(100);
  5436. #if HAS_BUZZER
  5437. millis_t next_tick = 0;
  5438. #endif
  5439. // Wait for filament insert by user and press button
  5440. lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_INSERT);
  5441. while (!lcd_clicked()) {
  5442. #if HAS_BUZZER
  5443. millis_t ms = millis();
  5444. if (ms >= next_tick) {
  5445. BUZZ(300, 2000);
  5446. next_tick = ms + 2500; // Beep every 2.5s while waiting
  5447. }
  5448. #endif
  5449. idle(true);
  5450. }
  5451. delay(100);
  5452. while (lcd_clicked()) idle(true);
  5453. delay(100);
  5454. // Show load message
  5455. lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_LOAD);
  5456. // Load filament
  5457. if (code_seen('L')) destination[E_AXIS] -= code_value_axis_units(E_AXIS);
  5458. #if defined(FILAMENT_CHANGE_LOAD_LENGTH) && FILAMENT_CHANGE_LOAD_LENGTH > 0
  5459. else destination[E_AXIS] += FILAMENT_CHANGE_LOAD_LENGTH;
  5460. #endif
  5461. RUNPLAN(FILAMENT_CHANGE_LOAD_FEEDRATE);
  5462. stepper.synchronize();
  5463. #if defined(FILAMENT_CHANGE_EXTRUDE_LENGTH) && FILAMENT_CHANGE_EXTRUDE_LENGTH > 0
  5464. do {
  5465. // Extrude filament to get into hotend
  5466. lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_EXTRUDE);
  5467. destination[E_AXIS] += FILAMENT_CHANGE_EXTRUDE_LENGTH;
  5468. RUNPLAN(FILAMENT_CHANGE_EXTRUDE_FEEDRATE);
  5469. stepper.synchronize();
  5470. // Ask user if more filament should be extruded
  5471. KEEPALIVE_STATE(PAUSED_FOR_USER);
  5472. lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_OPTION);
  5473. while (filament_change_menu_response == FILAMENT_CHANGE_RESPONSE_WAIT_FOR) idle(true);
  5474. KEEPALIVE_STATE(IN_HANDLER);
  5475. } while (filament_change_menu_response != FILAMENT_CHANGE_RESPONSE_RESUME_PRINT);
  5476. #endif
  5477. lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_RESUME);
  5478. KEEPALIVE_STATE(IN_HANDLER);
  5479. // Set extruder to saved position
  5480. current_position[E_AXIS] = lastpos[E_AXIS];
  5481. destination[E_AXIS] = lastpos[E_AXIS];
  5482. planner.set_e_position_mm(current_position[E_AXIS]);
  5483. #if ENABLED(DELTA)
  5484. // Move XYZ to starting position, then E
  5485. inverse_kinematics(lastpos);
  5486. planner.buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], destination[E_AXIS], FILAMENT_CHANGE_XY_FEEDRATE, active_extruder);
  5487. planner.buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], lastpos[E_AXIS], FILAMENT_CHANGE_XY_FEEDRATE, active_extruder);
  5488. #else
  5489. // Move XY to starting position, then Z, then E
  5490. destination[X_AXIS] = lastpos[X_AXIS];
  5491. destination[Y_AXIS] = lastpos[Y_AXIS];
  5492. RUNPLAN(FILAMENT_CHANGE_XY_FEEDRATE);
  5493. destination[Z_AXIS] = lastpos[Z_AXIS];
  5494. RUNPLAN(FILAMENT_CHANGE_Z_FEEDRATE);
  5495. #endif
  5496. stepper.synchronize();
  5497. #if ENABLED(FILAMENT_RUNOUT_SENSOR)
  5498. filament_ran_out = false;
  5499. #endif
  5500. // Show status screen
  5501. lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_STATUS);
  5502. }
  5503. #endif // FILAMENT_CHANGE_FEATURE
  5504. #if ENABLED(DUAL_X_CARRIAGE)
  5505. /**
  5506. * M605: Set dual x-carriage movement mode
  5507. *
  5508. * M605 S0: Full control mode. The slicer has full control over x-carriage movement
  5509. * M605 S1: Auto-park mode. The inactive head will auto park/unpark without slicer involvement
  5510. * M605 S2 [Xnnn] [Rmmm]: Duplication mode. The second extruder will duplicate the first with nnn
  5511. * units x-offset and an optional differential hotend temperature of
  5512. * mmm degrees. E.g., with "M605 S2 X100 R2" the second extruder will duplicate
  5513. * the first with a spacing of 100mm in the x direction and 2 degrees hotter.
  5514. *
  5515. * Note: the X axis should be homed after changing dual x-carriage mode.
  5516. */
  5517. inline void gcode_M605() {
  5518. stepper.synchronize();
  5519. if (code_seen('S')) dual_x_carriage_mode = code_value_byte();
  5520. switch (dual_x_carriage_mode) {
  5521. case DXC_DUPLICATION_MODE:
  5522. if (code_seen('X')) duplicate_extruder_x_offset = max(code_value_axis_units(X_AXIS), X2_MIN_POS - x_home_pos(0));
  5523. if (code_seen('R')) duplicate_extruder_temp_offset = code_value_temp_diff();
  5524. SERIAL_ECHO_START;
  5525. SERIAL_ECHOPGM(MSG_HOTEND_OFFSET);
  5526. SERIAL_CHAR(' ');
  5527. SERIAL_ECHO(hotend_offset[X_AXIS][0]);
  5528. SERIAL_CHAR(',');
  5529. SERIAL_ECHO(hotend_offset[Y_AXIS][0]);
  5530. SERIAL_CHAR(' ');
  5531. SERIAL_ECHO(duplicate_extruder_x_offset);
  5532. SERIAL_CHAR(',');
  5533. SERIAL_ECHOLN(hotend_offset[Y_AXIS][1]);
  5534. break;
  5535. case DXC_FULL_CONTROL_MODE:
  5536. case DXC_AUTO_PARK_MODE:
  5537. break;
  5538. default:
  5539. dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE;
  5540. break;
  5541. }
  5542. active_extruder_parked = false;
  5543. extruder_duplication_enabled = false;
  5544. delayed_move_time = 0;
  5545. }
  5546. #elif ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
  5547. inline void gcode_M605() {
  5548. stepper.synchronize();
  5549. extruder_duplication_enabled = code_seen('S') && code_value_int() == 2;
  5550. SERIAL_ECHO_START;
  5551. SERIAL_ECHOLNPAIR(MSG_DUPLICATION_MODE, extruder_duplication_enabled ? MSG_ON : MSG_OFF);
  5552. }
  5553. #endif // M605
  5554. #if ENABLED(LIN_ADVANCE)
  5555. /**
  5556. * M905: Set advance factor
  5557. */
  5558. inline void gcode_M905() {
  5559. stepper.synchronize();
  5560. stepper.advance_M905(code_seen('K') ? code_value_float() : -1.0);
  5561. }
  5562. #endif
  5563. /**
  5564. * M907: Set digital trimpot motor current using axis codes X, Y, Z, E, B, S
  5565. */
  5566. inline void gcode_M907() {
  5567. #if HAS_DIGIPOTSS
  5568. LOOP_XYZE(i)
  5569. if (code_seen(axis_codes[i])) stepper.digipot_current(i, code_value_int());
  5570. if (code_seen('B')) stepper.digipot_current(4, code_value_int());
  5571. if (code_seen('S')) for (int i = 0; i <= 4; i++) stepper.digipot_current(i, code_value_int());
  5572. #endif
  5573. #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
  5574. if (code_seen('X')) stepper.digipot_current(0, code_value_int());
  5575. #endif
  5576. #if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
  5577. if (code_seen('Z')) stepper.digipot_current(1, code_value_int());
  5578. #endif
  5579. #if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
  5580. if (code_seen('E')) stepper.digipot_current(2, code_value_int());
  5581. #endif
  5582. #if ENABLED(DIGIPOT_I2C)
  5583. // this one uses actual amps in floating point
  5584. LOOP_XYZE(i) if (code_seen(axis_codes[i])) digipot_i2c_set_current(i, code_value_float());
  5585. // for each additional extruder (named B,C,D,E..., channels 4,5,6,7...)
  5586. for (int i = NUM_AXIS; i < DIGIPOT_I2C_NUM_CHANNELS; i++) if (code_seen('B' + i - (NUM_AXIS))) digipot_i2c_set_current(i, code_value_float());
  5587. #endif
  5588. #if ENABLED(DAC_STEPPER_CURRENT)
  5589. if (code_seen('S')) {
  5590. float dac_percent = code_value_float();
  5591. for (uint8_t i = 0; i <= 4; i++) dac_current_percent(i, dac_percent);
  5592. }
  5593. LOOP_XYZE(i) if (code_seen(axis_codes[i])) dac_current_percent(i, code_value_float());
  5594. #endif
  5595. }
  5596. #if HAS_DIGIPOTSS || ENABLED(DAC_STEPPER_CURRENT)
  5597. /**
  5598. * M908: Control digital trimpot directly (M908 P<pin> S<current>)
  5599. */
  5600. inline void gcode_M908() {
  5601. #if HAS_DIGIPOTSS
  5602. stepper.digitalPotWrite(
  5603. code_seen('P') ? code_value_int() : 0,
  5604. code_seen('S') ? code_value_int() : 0
  5605. );
  5606. #endif
  5607. #ifdef DAC_STEPPER_CURRENT
  5608. dac_current_raw(
  5609. code_seen('P') ? code_value_byte() : -1,
  5610. code_seen('S') ? code_value_ushort() : 0
  5611. );
  5612. #endif
  5613. }
  5614. #if ENABLED(DAC_STEPPER_CURRENT) // As with Printrbot RevF
  5615. inline void gcode_M909() { dac_print_values(); }
  5616. inline void gcode_M910() { dac_commit_eeprom(); }
  5617. #endif
  5618. #endif // HAS_DIGIPOTSS || DAC_STEPPER_CURRENT
  5619. #if HAS_MICROSTEPS
  5620. // M350 Set microstepping mode. Warning: Steps per unit remains unchanged. S code sets stepping mode for all drivers.
  5621. inline void gcode_M350() {
  5622. if (code_seen('S')) for (int i = 0; i <= 4; i++) stepper.microstep_mode(i, code_value_byte());
  5623. LOOP_XYZE(i) if (code_seen(axis_codes[i])) stepper.microstep_mode(i, code_value_byte());
  5624. if (code_seen('B')) stepper.microstep_mode(4, code_value_byte());
  5625. stepper.microstep_readings();
  5626. }
  5627. /**
  5628. * M351: Toggle MS1 MS2 pins directly with axis codes X Y Z E B
  5629. * S# determines MS1 or MS2, X# sets the pin high/low.
  5630. */
  5631. inline void gcode_M351() {
  5632. if (code_seen('S')) switch (code_value_byte()) {
  5633. case 1:
  5634. LOOP_XYZE(i) if (code_seen(axis_codes[i])) stepper.microstep_ms(i, code_value_byte(), -1);
  5635. if (code_seen('B')) stepper.microstep_ms(4, code_value_byte(), -1);
  5636. break;
  5637. case 2:
  5638. LOOP_XYZE(i) if (code_seen(axis_codes[i])) stepper.microstep_ms(i, -1, code_value_byte());
  5639. if (code_seen('B')) stepper.microstep_ms(4, -1, code_value_byte());
  5640. break;
  5641. }
  5642. stepper.microstep_readings();
  5643. }
  5644. #endif // HAS_MICROSTEPS
  5645. #if ENABLED(MIXING_EXTRUDER)
  5646. /**
  5647. * M163: Set a single mix factor for a mixing extruder
  5648. * This is called "weight" by some systems.
  5649. *
  5650. * S[index] The channel index to set
  5651. * P[float] The mix value
  5652. *
  5653. */
  5654. inline void gcode_M163() {
  5655. int mix_index = code_seen('S') ? code_value_int() : 0;
  5656. float mix_value = code_seen('P') ? code_value_float() : 0.0;
  5657. if (mix_index < MIXING_STEPPERS) mixing_factor[mix_index] = mix_value;
  5658. }
  5659. #if MIXING_VIRTUAL_TOOLS > 1
  5660. /**
  5661. * M164: Store the current mix factors as a virtual tool.
  5662. *
  5663. * S[index] The virtual tool to store
  5664. *
  5665. */
  5666. inline void gcode_M164() {
  5667. int tool_index = code_seen('S') ? code_value_int() : 0;
  5668. if (tool_index < MIXING_VIRTUAL_TOOLS) {
  5669. normalize_mix();
  5670. for (uint8_t i = 0; i < MIXING_STEPPERS; i++)
  5671. mixing_virtual_tool_mix[tool_index][i] = mixing_factor[i];
  5672. }
  5673. }
  5674. #endif
  5675. #if ENABLED(DIRECT_MIXING_IN_G1)
  5676. /**
  5677. * M165: Set multiple mix factors for a mixing extruder.
  5678. * Factors that are left out will be set to 0.
  5679. * All factors together must add up to 1.0.
  5680. *
  5681. * A[factor] Mix factor for extruder stepper 1
  5682. * B[factor] Mix factor for extruder stepper 2
  5683. * C[factor] Mix factor for extruder stepper 3
  5684. * D[factor] Mix factor for extruder stepper 4
  5685. * H[factor] Mix factor for extruder stepper 5
  5686. * I[factor] Mix factor for extruder stepper 6
  5687. *
  5688. */
  5689. inline void gcode_M165() { gcode_get_mix(); }
  5690. #endif
  5691. #endif // MIXING_EXTRUDER
  5692. /**
  5693. * M999: Restart after being stopped
  5694. *
  5695. * Default behaviour is to flush the serial buffer and request
  5696. * a resend to the host starting on the last N line received.
  5697. *
  5698. * Sending "M999 S1" will resume printing without flushing the
  5699. * existing command buffer.
  5700. *
  5701. */
  5702. inline void gcode_M999() {
  5703. Running = true;
  5704. lcd_reset_alert_level();
  5705. if (code_seen('S') && code_value_bool()) return;
  5706. // gcode_LastN = Stopped_gcode_LastN;
  5707. FlushSerialRequestResend();
  5708. }
  5709. #if ENABLED(SWITCHING_EXTRUDER)
  5710. inline void move_extruder_servo(uint8_t e) {
  5711. const int angles[2] = SWITCHING_EXTRUDER_SERVO_ANGLES;
  5712. MOVE_SERVO(SWITCHING_EXTRUDER_SERVO_NR, angles[e]);
  5713. }
  5714. #endif
  5715. inline void invalid_extruder_error(const uint8_t &e) {
  5716. SERIAL_ECHO_START;
  5717. SERIAL_CHAR('T');
  5718. SERIAL_PROTOCOL_F(e, DEC);
  5719. SERIAL_ECHOLN(MSG_INVALID_EXTRUDER);
  5720. }
  5721. void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool no_move/*=false*/) {
  5722. #if ENABLED(MIXING_EXTRUDER) && MIXING_VIRTUAL_TOOLS > 1
  5723. if (tmp_extruder >= MIXING_VIRTUAL_TOOLS) {
  5724. invalid_extruder_error(tmp_extruder);
  5725. return;
  5726. }
  5727. // T0-Tnnn: Switch virtual tool by changing the mix
  5728. for (uint8_t j = 0; j < MIXING_STEPPERS; j++)
  5729. mixing_factor[j] = mixing_virtual_tool_mix[tmp_extruder][j];
  5730. #else //!MIXING_EXTRUDER || MIXING_VIRTUAL_TOOLS <= 1
  5731. #if HOTENDS > 1
  5732. if (tmp_extruder >= EXTRUDERS) {
  5733. invalid_extruder_error(tmp_extruder);
  5734. return;
  5735. }
  5736. float old_feedrate_mm_s = feedrate_mm_s;
  5737. feedrate_mm_s = fr_mm_s > 0.0 ? (old_feedrate_mm_s = fr_mm_s) : XY_PROBE_FEEDRATE_MM_S;
  5738. if (tmp_extruder != active_extruder) {
  5739. if (!no_move && axis_unhomed_error(true, true, true)) {
  5740. SERIAL_ECHOLNPGM("No move on toolchange");
  5741. no_move = true;
  5742. }
  5743. // Save current position to destination, for use later
  5744. set_destination_to_current();
  5745. #if ENABLED(DUAL_X_CARRIAGE)
  5746. #if ENABLED(DEBUG_LEVELING_FEATURE)
  5747. if (DEBUGGING(LEVELING)) {
  5748. SERIAL_ECHOPGM("Dual X Carriage Mode ");
  5749. switch (dual_x_carriage_mode) {
  5750. case DXC_DUPLICATION_MODE: SERIAL_ECHOLNPGM("DXC_DUPLICATION_MODE"); break;
  5751. case DXC_AUTO_PARK_MODE: SERIAL_ECHOLNPGM("DXC_AUTO_PARK_MODE"); break;
  5752. case DXC_FULL_CONTROL_MODE: SERIAL_ECHOLNPGM("DXC_FULL_CONTROL_MODE"); break;
  5753. }
  5754. }
  5755. #endif
  5756. if (dual_x_carriage_mode == DXC_AUTO_PARK_MODE && IsRunning() &&
  5757. (delayed_move_time || current_position[X_AXIS] != x_home_pos(active_extruder))
  5758. ) {
  5759. #if ENABLED(DEBUG_LEVELING_FEATURE)
  5760. if (DEBUGGING(LEVELING)) {
  5761. SERIAL_ECHOPAIR("Raise to ", current_position[Z_AXIS] + TOOLCHANGE_PARK_ZLIFT); SERIAL_EOL;
  5762. SERIAL_ECHOPAIR("MoveX to ", x_home_pos(active_extruder)); SERIAL_EOL;
  5763. SERIAL_ECHOPAIR("Lower to ", current_position[Z_AXIS]); SERIAL_EOL;
  5764. }
  5765. #endif
  5766. // Park old head: 1) raise 2) move to park position 3) lower
  5767. for (uint8_t i = 0; i < 3; i++)
  5768. planner.buffer_line(
  5769. i == 0 ? current_position[X_AXIS] : x_home_pos(active_extruder),
  5770. current_position[Y_AXIS],
  5771. current_position[Z_AXIS] + (i == 2 ? 0 : TOOLCHANGE_PARK_ZLIFT),
  5772. current_position[E_AXIS],
  5773. planner.max_feedrate_mm_s[i == 1 ? X_AXIS : Z_AXIS],
  5774. active_extruder
  5775. );
  5776. stepper.synchronize();
  5777. }
  5778. // apply Y & Z extruder offset (x offset is already used in determining home pos)
  5779. current_position[Y_AXIS] -= hotend_offset[Y_AXIS][active_extruder] - hotend_offset[Y_AXIS][tmp_extruder];
  5780. current_position[Z_AXIS] -= hotend_offset[Z_AXIS][active_extruder] - hotend_offset[Z_AXIS][tmp_extruder];
  5781. active_extruder = tmp_extruder;
  5782. // This function resets the max/min values - the current position may be overwritten below.
  5783. set_axis_is_at_home(X_AXIS);
  5784. #if ENABLED(DEBUG_LEVELING_FEATURE)
  5785. if (DEBUGGING(LEVELING)) DEBUG_POS("New Extruder", current_position);
  5786. #endif
  5787. switch (dual_x_carriage_mode) {
  5788. case DXC_FULL_CONTROL_MODE:
  5789. current_position[X_AXIS] = LOGICAL_X_POSITION(inactive_extruder_x_pos);
  5790. inactive_extruder_x_pos = RAW_X_POSITION(destination[X_AXIS]);
  5791. break;
  5792. case DXC_DUPLICATION_MODE:
  5793. active_extruder_parked = (active_extruder == 0); // this triggers the second extruder to move into the duplication position
  5794. if (active_extruder_parked)
  5795. current_position[X_AXIS] = LOGICAL_X_POSITION(inactive_extruder_x_pos);
  5796. else
  5797. current_position[X_AXIS] = destination[X_AXIS] + duplicate_extruder_x_offset;
  5798. inactive_extruder_x_pos = RAW_X_POSITION(destination[X_AXIS]);
  5799. extruder_duplication_enabled = false;
  5800. break;
  5801. default:
  5802. // record raised toolhead position for use by unpark
  5803. memcpy(raised_parked_position, current_position, sizeof(raised_parked_position));
  5804. raised_parked_position[Z_AXIS] += TOOLCHANGE_UNPARK_ZLIFT;
  5805. active_extruder_parked = true;
  5806. delayed_move_time = 0;
  5807. break;
  5808. }
  5809. #if ENABLED(DEBUG_LEVELING_FEATURE)
  5810. if (DEBUGGING(LEVELING)) {
  5811. SERIAL_ECHOLNPAIR("Active extruder parked: ", active_extruder_parked ? "yes" : "no");
  5812. DEBUG_POS("New extruder (parked)", current_position);
  5813. }
  5814. #endif
  5815. // No extra case for AUTO_BED_LEVELING_FEATURE in DUAL_X_CARRIAGE. Does that mean they don't work together?
  5816. #else // !DUAL_X_CARRIAGE
  5817. #if ENABLED(SWITCHING_EXTRUDER)
  5818. // <0 if the new nozzle is higher, >0 if lower. A bigger raise when lower.
  5819. float z_diff = hotend_offset[Z_AXIS][active_extruder] - hotend_offset[Z_AXIS][tmp_extruder],
  5820. z_raise = 0.3 + (z_diff > 0.0 ? z_diff : 0.0);
  5821. // Always raise by some amount
  5822. planner.buffer_line(
  5823. current_position[X_AXIS],
  5824. current_position[Y_AXIS],
  5825. current_position[Z_AXIS] + z_raise,
  5826. current_position[E_AXIS],
  5827. planner.max_feedrate_mm_s[Z_AXIS],
  5828. active_extruder
  5829. );
  5830. stepper.synchronize();
  5831. move_extruder_servo(active_extruder);
  5832. delay(500);
  5833. // Move back down, if needed
  5834. if (z_raise != z_diff) {
  5835. planner.buffer_line(
  5836. current_position[X_AXIS],
  5837. current_position[Y_AXIS],
  5838. current_position[Z_AXIS] + z_diff,
  5839. current_position[E_AXIS],
  5840. planner.max_feedrate_mm_s[Z_AXIS],
  5841. active_extruder
  5842. );
  5843. stepper.synchronize();
  5844. }
  5845. #endif
  5846. /**
  5847. * Set current_position to the position of the new nozzle.
  5848. * Offsets are based on linear distance, so we need to get
  5849. * the resulting position in coordinate space.
  5850. *
  5851. * - With grid or 3-point leveling, offset XYZ by a tilted vector
  5852. * - With mesh leveling, update Z for the new position
  5853. * - Otherwise, just use the raw linear distance
  5854. *
  5855. * Software endstops are altered here too. Consider a case where:
  5856. * E0 at X=0 ... E1 at X=10
  5857. * When we switch to E1 now X=10, but E1 can't move left.
  5858. * To express this we apply the change in XY to the software endstops.
  5859. * E1 can move farther right than E0, so the right limit is extended.
  5860. *
  5861. * Note that we don't adjust the Z software endstops. Why not?
  5862. * Consider a case where Z=0 (here) and switching to E1 makes Z=1
  5863. * because the bed is 1mm lower at the new position. As long as
  5864. * the first nozzle is out of the way, the carriage should be
  5865. * allowed to move 1mm lower. This technically "breaks" the
  5866. * Z software endstop. But this is technically correct (and
  5867. * there is no viable alternative).
  5868. */
  5869. #if ENABLED(AUTO_BED_LEVELING_FEATURE)
  5870. // Offset extruder, make sure to apply the bed level rotation matrix
  5871. vector_3 tmp_offset_vec = vector_3(hotend_offset[X_AXIS][tmp_extruder],
  5872. hotend_offset[Y_AXIS][tmp_extruder],
  5873. 0),
  5874. act_offset_vec = vector_3(hotend_offset[X_AXIS][active_extruder],
  5875. hotend_offset[Y_AXIS][active_extruder],
  5876. 0),
  5877. offset_vec = tmp_offset_vec - act_offset_vec;
  5878. #if ENABLED(DEBUG_LEVELING_FEATURE)
  5879. if (DEBUGGING(LEVELING)) {
  5880. tmp_offset_vec.debug("tmp_offset_vec");
  5881. act_offset_vec.debug("act_offset_vec");
  5882. offset_vec.debug("offset_vec (BEFORE)");
  5883. }
  5884. #endif
  5885. offset_vec.apply_rotation(planner.bed_level_matrix.transpose(planner.bed_level_matrix));
  5886. #if ENABLED(DEBUG_LEVELING_FEATURE)
  5887. if (DEBUGGING(LEVELING)) offset_vec.debug("offset_vec (AFTER)");
  5888. #endif
  5889. // Adjustments to the current position
  5890. float xydiff[2] = { offset_vec.x, offset_vec.y };
  5891. current_position[Z_AXIS] += offset_vec.z;
  5892. #else // !AUTO_BED_LEVELING_FEATURE
  5893. float xydiff[2] = {
  5894. hotend_offset[X_AXIS][tmp_extruder] - hotend_offset[X_AXIS][active_extruder],
  5895. hotend_offset[Y_AXIS][tmp_extruder] - hotend_offset[Y_AXIS][active_extruder]
  5896. };
  5897. #if ENABLED(MESH_BED_LEVELING)
  5898. if (mbl.active()) {
  5899. #if ENABLED(DEBUG_LEVELING_FEATURE)
  5900. if (DEBUGGING(LEVELING)) SERIAL_ECHOPAIR("Z before MBL: ", current_position[Z_AXIS]);
  5901. #endif
  5902. float xpos = RAW_CURRENT_POSITION(X_AXIS),
  5903. ypos = RAW_CURRENT_POSITION(Y_AXIS);
  5904. current_position[Z_AXIS] += mbl.get_z(xpos + xydiff[X_AXIS], ypos + xydiff[Y_AXIS]) - mbl.get_z(xpos, ypos);
  5905. #if ENABLED(DEBUG_LEVELING_FEATURE)
  5906. if (DEBUGGING(LEVELING))
  5907. SERIAL_ECHOLNPAIR(" after: ", current_position[Z_AXIS]);
  5908. #endif
  5909. }
  5910. #endif // MESH_BED_LEVELING
  5911. #endif // !AUTO_BED_LEVELING_FEATURE
  5912. #if ENABLED(DEBUG_LEVELING_FEATURE)
  5913. if (DEBUGGING(LEVELING)) {
  5914. SERIAL_ECHOPAIR("Offset Tool XY by { ", xydiff[X_AXIS]);
  5915. SERIAL_ECHOPAIR(", ", xydiff[Y_AXIS]);
  5916. SERIAL_ECHOLNPGM(" }");
  5917. }
  5918. #endif
  5919. // The newly-selected extruder XY is actually at...
  5920. current_position[X_AXIS] += xydiff[X_AXIS];
  5921. current_position[Y_AXIS] += xydiff[Y_AXIS];
  5922. for (uint8_t i = X_AXIS; i <= Y_AXIS; i++) {
  5923. position_shift[i] += xydiff[i];
  5924. update_software_endstops((AxisEnum)i);
  5925. }
  5926. // Set the new active extruder
  5927. active_extruder = tmp_extruder;
  5928. #endif // !DUAL_X_CARRIAGE
  5929. #if ENABLED(DEBUG_LEVELING_FEATURE)
  5930. if (DEBUGGING(LEVELING)) DEBUG_POS("Sync After Toolchange", current_position);
  5931. #endif
  5932. // Tell the planner the new "current position"
  5933. SYNC_PLAN_POSITION_KINEMATIC();
  5934. // Move to the "old position" (move the extruder into place)
  5935. if (!no_move && IsRunning()) {
  5936. #if ENABLED(DEBUG_LEVELING_FEATURE)
  5937. if (DEBUGGING(LEVELING)) DEBUG_POS("Move back", destination);
  5938. #endif
  5939. prepare_move_to_destination();
  5940. }
  5941. } // (tmp_extruder != active_extruder)
  5942. stepper.synchronize();
  5943. #if ENABLED(EXT_SOLENOID)
  5944. disable_all_solenoids();
  5945. enable_solenoid_on_active_extruder();
  5946. #endif // EXT_SOLENOID
  5947. feedrate_mm_s = old_feedrate_mm_s;
  5948. #else // HOTENDS <= 1
  5949. // Set the new active extruder
  5950. active_extruder = tmp_extruder;
  5951. UNUSED(fr_mm_s);
  5952. UNUSED(no_move);
  5953. #endif // HOTENDS <= 1
  5954. SERIAL_ECHO_START;
  5955. SERIAL_ECHOPGM(MSG_ACTIVE_EXTRUDER);
  5956. SERIAL_PROTOCOLLN((int)active_extruder);
  5957. #endif //!MIXING_EXTRUDER || MIXING_VIRTUAL_TOOLS <= 1
  5958. }
  5959. /**
  5960. * T0-T3: Switch tool, usually switching extruders
  5961. *
  5962. * F[units/min] Set the movement feedrate
  5963. * S1 Don't move the tool in XY after change
  5964. */
  5965. inline void gcode_T(uint8_t tmp_extruder) {
  5966. #if ENABLED(DEBUG_LEVELING_FEATURE)
  5967. if (DEBUGGING(LEVELING)) {
  5968. SERIAL_ECHOPAIR(">>> gcode_T(", tmp_extruder);
  5969. SERIAL_ECHOLNPGM(")");
  5970. DEBUG_POS("BEFORE", current_position);
  5971. }
  5972. #endif
  5973. #if HOTENDS == 1 || (ENABLED(MIXING_EXTRUDER) && MIXING_VIRTUAL_TOOLS > 1)
  5974. tool_change(tmp_extruder);
  5975. #elif HOTENDS > 1
  5976. tool_change(
  5977. tmp_extruder,
  5978. code_seen('F') ? MMM_TO_MMS(code_value_axis_units(X_AXIS)) : 0.0,
  5979. (tmp_extruder == active_extruder) || (code_seen('S') && code_value_bool())
  5980. );
  5981. #endif
  5982. #if ENABLED(DEBUG_LEVELING_FEATURE)
  5983. if (DEBUGGING(LEVELING)) {
  5984. DEBUG_POS("AFTER", current_position);
  5985. SERIAL_ECHOLNPGM("<<< gcode_T");
  5986. }
  5987. #endif
  5988. }
  5989. /**
  5990. * Process a single command and dispatch it to its handler
  5991. * This is called from the main loop()
  5992. */
  5993. void process_next_command() {
  5994. current_command = command_queue[cmd_queue_index_r];
  5995. if (DEBUGGING(ECHO)) {
  5996. SERIAL_ECHO_START;
  5997. SERIAL_ECHOLN(current_command);
  5998. }
  5999. // Sanitize the current command:
  6000. // - Skip leading spaces
  6001. // - Bypass N[-0-9][0-9]*[ ]*
  6002. // - Overwrite * with nul to mark the end
  6003. while (*current_command == ' ') ++current_command;
  6004. if (*current_command == 'N' && NUMERIC_SIGNED(current_command[1])) {
  6005. current_command += 2; // skip N[-0-9]
  6006. while (NUMERIC(*current_command)) ++current_command; // skip [0-9]*
  6007. while (*current_command == ' ') ++current_command; // skip [ ]*
  6008. }
  6009. char* starpos = strchr(current_command, '*'); // * should always be the last parameter
  6010. if (starpos) while (*starpos == ' ' || *starpos == '*') *starpos-- = '\0'; // nullify '*' and ' '
  6011. char *cmd_ptr = current_command;
  6012. // Get the command code, which must be G, M, or T
  6013. char command_code = *cmd_ptr++;
  6014. // Skip spaces to get the numeric part
  6015. while (*cmd_ptr == ' ') cmd_ptr++;
  6016. uint16_t codenum = 0; // define ahead of goto
  6017. // Bail early if there's no code
  6018. bool code_is_good = NUMERIC(*cmd_ptr);
  6019. if (!code_is_good) goto ExitUnknownCommand;
  6020. // Get and skip the code number
  6021. do {
  6022. codenum = (codenum * 10) + (*cmd_ptr - '0');
  6023. cmd_ptr++;
  6024. } while (NUMERIC(*cmd_ptr));
  6025. // Skip all spaces to get to the first argument, or nul
  6026. while (*cmd_ptr == ' ') cmd_ptr++;
  6027. // The command's arguments (if any) start here, for sure!
  6028. current_command_args = cmd_ptr;
  6029. KEEPALIVE_STATE(IN_HANDLER);
  6030. // Handle a known G, M, or T
  6031. switch (command_code) {
  6032. case 'G': switch (codenum) {
  6033. // G0, G1
  6034. case 0:
  6035. case 1:
  6036. gcode_G0_G1();
  6037. break;
  6038. // G2, G3
  6039. #if ENABLED(ARC_SUPPORT) && DISABLED(SCARA)
  6040. case 2: // G2 - CW ARC
  6041. case 3: // G3 - CCW ARC
  6042. gcode_G2_G3(codenum == 2);
  6043. break;
  6044. #endif
  6045. // G4 Dwell
  6046. case 4:
  6047. gcode_G4();
  6048. break;
  6049. #if ENABLED(BEZIER_CURVE_SUPPORT)
  6050. // G5
  6051. case 5: // G5 - Cubic B_spline
  6052. gcode_G5();
  6053. break;
  6054. #endif // BEZIER_CURVE_SUPPORT
  6055. #if ENABLED(FWRETRACT)
  6056. case 10: // G10: retract
  6057. case 11: // G11: retract_recover
  6058. gcode_G10_G11(codenum == 10);
  6059. break;
  6060. #endif // FWRETRACT
  6061. #if ENABLED(NOZZLE_CLEAN_FEATURE)
  6062. case 12:
  6063. gcode_G12(); // G12: Nozzle Clean
  6064. break;
  6065. #endif // NOZZLE_CLEAN_FEATURE
  6066. #if ENABLED(INCH_MODE_SUPPORT)
  6067. case 20: //G20: Inch Mode
  6068. gcode_G20();
  6069. break;
  6070. case 21: //G21: MM Mode
  6071. gcode_G21();
  6072. break;
  6073. #endif // INCH_MODE_SUPPORT
  6074. #if ENABLED(NOZZLE_PARK_FEATURE)
  6075. case 27: // G27: Nozzle Park
  6076. gcode_G27();
  6077. break;
  6078. #endif // NOZZLE_PARK_FEATURE
  6079. case 28: // G28: Home all axes, one at a time
  6080. gcode_G28();
  6081. break;
  6082. #if ENABLED(AUTO_BED_LEVELING_FEATURE) || ENABLED(MESH_BED_LEVELING)
  6083. case 29: // G29 Detailed Z probe, probes the bed at 3 or more points.
  6084. gcode_G29();
  6085. break;
  6086. #endif // AUTO_BED_LEVELING_FEATURE
  6087. #if HAS_BED_PROBE
  6088. case 30: // G30 Single Z probe
  6089. gcode_G30();
  6090. break;
  6091. #if ENABLED(Z_PROBE_SLED)
  6092. case 31: // G31: dock the sled
  6093. gcode_G31();
  6094. break;
  6095. case 32: // G32: undock the sled
  6096. gcode_G32();
  6097. break;
  6098. #endif // Z_PROBE_SLED
  6099. #endif // HAS_BED_PROBE
  6100. case 90: // G90
  6101. relative_mode = false;
  6102. break;
  6103. case 91: // G91
  6104. relative_mode = true;
  6105. break;
  6106. case 92: // G92
  6107. gcode_G92();
  6108. break;
  6109. }
  6110. break;
  6111. case 'M': switch (codenum) {
  6112. #if ENABLED(ULTIPANEL)
  6113. case 0: // M0 - Unconditional stop - Wait for user button press on LCD
  6114. case 1: // M1 - Conditional stop - Wait for user button press on LCD
  6115. gcode_M0_M1();
  6116. break;
  6117. #endif // ULTIPANEL
  6118. case 17:
  6119. gcode_M17();
  6120. break;
  6121. #if ENABLED(SDSUPPORT)
  6122. case 20: // M20 - list SD card
  6123. gcode_M20(); break;
  6124. case 21: // M21 - init SD card
  6125. gcode_M21(); break;
  6126. case 22: //M22 - release SD card
  6127. gcode_M22(); break;
  6128. case 23: //M23 - Select file
  6129. gcode_M23(); break;
  6130. case 24: //M24 - Start SD print
  6131. gcode_M24(); break;
  6132. case 25: //M25 - Pause SD print
  6133. gcode_M25(); break;
  6134. case 26: //M26 - Set SD index
  6135. gcode_M26(); break;
  6136. case 27: //M27 - Get SD status
  6137. gcode_M27(); break;
  6138. case 28: //M28 - Start SD write
  6139. gcode_M28(); break;
  6140. case 29: //M29 - Stop SD write
  6141. gcode_M29(); break;
  6142. case 30: //M30 <filename> Delete File
  6143. gcode_M30(); break;
  6144. case 32: //M32 - Select file and start SD print
  6145. gcode_M32(); break;
  6146. #if ENABLED(LONG_FILENAME_HOST_SUPPORT)
  6147. case 33: //M33 - Get the long full path to a file or folder
  6148. gcode_M33(); break;
  6149. #endif // LONG_FILENAME_HOST_SUPPORT
  6150. case 928: //M928 - Start SD write
  6151. gcode_M928(); break;
  6152. #endif //SDSUPPORT
  6153. case 31: //M31 take time since the start of the SD print or an M109 command
  6154. gcode_M31();
  6155. break;
  6156. case 42: //M42 -Change pin status via gcode
  6157. gcode_M42();
  6158. break;
  6159. #if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
  6160. case 48: // M48 Z probe repeatability
  6161. gcode_M48();
  6162. break;
  6163. #endif // Z_MIN_PROBE_REPEATABILITY_TEST
  6164. case 75: // Start print timer
  6165. gcode_M75();
  6166. break;
  6167. case 76: // Pause print timer
  6168. gcode_M76();
  6169. break;
  6170. case 77: // Stop print timer
  6171. gcode_M77();
  6172. break;
  6173. #if ENABLED(PRINTCOUNTER)
  6174. case 78: // Show print statistics
  6175. gcode_M78();
  6176. break;
  6177. #endif
  6178. #if ENABLED(M100_FREE_MEMORY_WATCHER)
  6179. case 100:
  6180. gcode_M100();
  6181. break;
  6182. #endif
  6183. case 104: // M104
  6184. gcode_M104();
  6185. break;
  6186. case 110: // M110: Set Current Line Number
  6187. gcode_M110();
  6188. break;
  6189. case 111: // M111: Set debug level
  6190. gcode_M111();
  6191. break;
  6192. #if DISABLED(EMERGENCY_PARSER)
  6193. case 108: // M108: Cancel Waiting
  6194. gcode_M108();
  6195. break;
  6196. case 112: // M112: Emergency Stop
  6197. gcode_M112();
  6198. break;
  6199. case 410: // M410 quickstop - Abort all the planned moves.
  6200. gcode_M410();
  6201. break;
  6202. #endif
  6203. #if ENABLED(HOST_KEEPALIVE_FEATURE)
  6204. case 113: // M113: Set Host Keepalive interval
  6205. gcode_M113();
  6206. break;
  6207. #endif
  6208. case 140: // M140: Set bed temp
  6209. gcode_M140();
  6210. break;
  6211. case 105: // M105: Read current temperature
  6212. gcode_M105();
  6213. KEEPALIVE_STATE(NOT_BUSY);
  6214. return; // "ok" already printed
  6215. case 109: // M109: Wait for temperature
  6216. gcode_M109();
  6217. break;
  6218. #if HAS_TEMP_BED
  6219. case 190: // M190: Wait for bed heater to reach target
  6220. gcode_M190();
  6221. break;
  6222. #endif // HAS_TEMP_BED
  6223. #if FAN_COUNT > 0
  6224. case 106: // M106: Fan On
  6225. gcode_M106();
  6226. break;
  6227. case 107: // M107: Fan Off
  6228. gcode_M107();
  6229. break;
  6230. #endif // FAN_COUNT > 0
  6231. #if ENABLED(BARICUDA)
  6232. // PWM for HEATER_1_PIN
  6233. #if HAS_HEATER_1
  6234. case 126: // M126: valve open
  6235. gcode_M126();
  6236. break;
  6237. case 127: // M127: valve closed
  6238. gcode_M127();
  6239. break;
  6240. #endif // HAS_HEATER_1
  6241. // PWM for HEATER_2_PIN
  6242. #if HAS_HEATER_2
  6243. case 128: // M128: valve open
  6244. gcode_M128();
  6245. break;
  6246. case 129: // M129: valve closed
  6247. gcode_M129();
  6248. break;
  6249. #endif // HAS_HEATER_2
  6250. #endif // BARICUDA
  6251. #if HAS_POWER_SWITCH
  6252. case 80: // M80: Turn on Power Supply
  6253. gcode_M80();
  6254. break;
  6255. #endif // HAS_POWER_SWITCH
  6256. case 81: // M81: Turn off Power, including Power Supply, if possible
  6257. gcode_M81();
  6258. break;
  6259. case 82:
  6260. gcode_M82();
  6261. break;
  6262. case 83:
  6263. gcode_M83();
  6264. break;
  6265. case 18: // (for compatibility)
  6266. case 84: // M84
  6267. gcode_M18_M84();
  6268. break;
  6269. case 85: // M85
  6270. gcode_M85();
  6271. break;
  6272. case 92: // M92: Set the steps-per-unit for one or more axes
  6273. gcode_M92();
  6274. break;
  6275. case 115: // M115: Report capabilities
  6276. gcode_M115();
  6277. break;
  6278. case 117: // M117: Set LCD message text, if possible
  6279. gcode_M117();
  6280. break;
  6281. case 114: // M114: Report current position
  6282. gcode_M114();
  6283. break;
  6284. case 120: // M120: Enable endstops
  6285. gcode_M120();
  6286. break;
  6287. case 121: // M121: Disable endstops
  6288. gcode_M121();
  6289. break;
  6290. case 119: // M119: Report endstop states
  6291. gcode_M119();
  6292. break;
  6293. #if ENABLED(ULTIPANEL)
  6294. case 145: // M145: Set material heatup parameters
  6295. gcode_M145();
  6296. break;
  6297. #endif
  6298. #if ENABLED(TEMPERATURE_UNITS_SUPPORT)
  6299. case 149:
  6300. gcode_M149();
  6301. break;
  6302. #endif
  6303. #if ENABLED(BLINKM)
  6304. case 150: // M150
  6305. gcode_M150();
  6306. break;
  6307. #endif //BLINKM
  6308. #if ENABLED(EXPERIMENTAL_I2CBUS)
  6309. case 155:
  6310. gcode_M155();
  6311. break;
  6312. case 156:
  6313. gcode_M156();
  6314. break;
  6315. #endif //EXPERIMENTAL_I2CBUS
  6316. #if ENABLED(MIXING_EXTRUDER)
  6317. case 163: // M163 S<int> P<float> set weight for a mixing extruder
  6318. gcode_M163();
  6319. break;
  6320. #if MIXING_VIRTUAL_TOOLS > 1
  6321. case 164: // M164 S<int> save current mix as a virtual extruder
  6322. gcode_M164();
  6323. break;
  6324. #endif
  6325. #if ENABLED(DIRECT_MIXING_IN_G1)
  6326. case 165: // M165 [ABCDHI]<float> set multiple mix weights
  6327. gcode_M165();
  6328. break;
  6329. #endif
  6330. #endif
  6331. case 200: // M200 D<diameter> Set filament diameter and set E axis units to cubic. (Use S0 to revert to linear units.)
  6332. gcode_M200();
  6333. break;
  6334. case 201: // M201
  6335. gcode_M201();
  6336. break;
  6337. #if 0 // Not used for Sprinter/grbl gen6
  6338. case 202: // M202
  6339. gcode_M202();
  6340. break;
  6341. #endif
  6342. case 203: // M203 max feedrate units/sec
  6343. gcode_M203();
  6344. break;
  6345. case 204: // M204 acclereration S normal moves T filmanent only moves
  6346. gcode_M204();
  6347. break;
  6348. case 205: //M205 advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk
  6349. gcode_M205();
  6350. break;
  6351. case 206: // M206 additional homing offset
  6352. gcode_M206();
  6353. break;
  6354. #if ENABLED(DELTA)
  6355. case 665: // M665 set delta configurations L<diagonal_rod> R<delta_radius> S<segments_per_sec>
  6356. gcode_M665();
  6357. break;
  6358. #endif
  6359. #if ENABLED(DELTA) || ENABLED(Z_DUAL_ENDSTOPS)
  6360. case 666: // M666 set delta / dual endstop adjustment
  6361. gcode_M666();
  6362. break;
  6363. #endif
  6364. #if ENABLED(FWRETRACT)
  6365. case 207: // M207 - Set Retract Length: S<length>, Feedrate: F<units/min>, and Z lift: Z<distance>
  6366. gcode_M207();
  6367. break;
  6368. case 208: // M208 - Set Recover (unretract) Additional (!) Length: S<length> and Feedrate: F<units/min>
  6369. gcode_M208();
  6370. break;
  6371. case 209: // M209 - Turn Automatic Retract Detection on/off: S<bool> (For slicers that don't support G10/11). Every normal extrude-only move will be classified as retract depending on the direction.
  6372. gcode_M209();
  6373. break;
  6374. #endif // FWRETRACT
  6375. case 211: // M211 - Enable, Disable, and/or Report software endstops
  6376. gcode_M211();
  6377. break;
  6378. #if HOTENDS > 1
  6379. case 218: // M218 - Set a tool offset: T<index> X<offset> Y<offset>
  6380. gcode_M218();
  6381. break;
  6382. #endif
  6383. case 220: // M220 - Set Feedrate Percentage: S<percent> ("FR" on your LCD)
  6384. gcode_M220();
  6385. break;
  6386. case 221: // M221 - Set Flow Percentage: S<percent>
  6387. gcode_M221();
  6388. break;
  6389. case 226: // M226 P<pin number> S<pin state>- Wait until the specified pin reaches the state required
  6390. gcode_M226();
  6391. break;
  6392. #if HAS_SERVOS
  6393. case 280: // M280 - set servo position absolute. P: servo index, S: angle or microseconds
  6394. gcode_M280();
  6395. break;
  6396. #endif // HAS_SERVOS
  6397. #if HAS_BUZZER
  6398. case 300: // M300 - Play beep tone
  6399. gcode_M300();
  6400. break;
  6401. #endif // HAS_BUZZER
  6402. #if ENABLED(PIDTEMP)
  6403. case 301: // M301
  6404. gcode_M301();
  6405. break;
  6406. #endif // PIDTEMP
  6407. #if ENABLED(PIDTEMPBED)
  6408. case 304: // M304
  6409. gcode_M304();
  6410. break;
  6411. #endif // PIDTEMPBED
  6412. #if defined(CHDK) || HAS_PHOTOGRAPH
  6413. case 240: // M240 Triggers a camera by emulating a Canon RC-1 : http://www.doc-diy.net/photo/rc-1_hacked/
  6414. gcode_M240();
  6415. break;
  6416. #endif // CHDK || PHOTOGRAPH_PIN
  6417. #if HAS_LCD_CONTRAST
  6418. case 250: // M250 Set LCD contrast value: C<value> (value 0..63)
  6419. gcode_M250();
  6420. break;
  6421. #endif // HAS_LCD_CONTRAST
  6422. #if ENABLED(PREVENT_COLD_EXTRUSION)
  6423. case 302: // allow cold extrudes, or set the minimum extrude temperature
  6424. gcode_M302();
  6425. break;
  6426. #endif // PREVENT_COLD_EXTRUSION
  6427. case 303: // M303 PID autotune
  6428. gcode_M303();
  6429. break;
  6430. #if ENABLED(SCARA)
  6431. case 360: // M360 SCARA Theta pos1
  6432. if (gcode_M360()) return;
  6433. break;
  6434. case 361: // M361 SCARA Theta pos2
  6435. if (gcode_M361()) return;
  6436. break;
  6437. case 362: // M362 SCARA Psi pos1
  6438. if (gcode_M362()) return;
  6439. break;
  6440. case 363: // M363 SCARA Psi pos2
  6441. if (gcode_M363()) return;
  6442. break;
  6443. case 364: // M364 SCARA Psi pos3 (90 deg to Theta)
  6444. if (gcode_M364()) return;
  6445. break;
  6446. case 365: // M365 Set SCARA scaling for X Y Z
  6447. gcode_M365();
  6448. break;
  6449. #endif // SCARA
  6450. case 400: // M400 finish all moves
  6451. gcode_M400();
  6452. break;
  6453. #if HAS_BED_PROBE
  6454. case 401:
  6455. gcode_M401();
  6456. break;
  6457. case 402:
  6458. gcode_M402();
  6459. break;
  6460. #endif // HAS_BED_PROBE
  6461. #if ENABLED(FILAMENT_WIDTH_SENSOR)
  6462. case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or display nominal filament width
  6463. gcode_M404();
  6464. break;
  6465. case 405: //M405 Turn on filament sensor for control
  6466. gcode_M405();
  6467. break;
  6468. case 406: //M406 Turn off filament sensor for control
  6469. gcode_M406();
  6470. break;
  6471. case 407: //M407 Display measured filament diameter
  6472. gcode_M407();
  6473. break;
  6474. #endif // ENABLED(FILAMENT_WIDTH_SENSOR)
  6475. #if ENABLED(MESH_BED_LEVELING)
  6476. case 420: // M420 Enable/Disable Mesh Bed Leveling
  6477. gcode_M420();
  6478. break;
  6479. case 421: // M421 Set a Mesh Bed Leveling Z coordinate
  6480. gcode_M421();
  6481. break;
  6482. #endif
  6483. case 428: // M428 Apply current_position to home_offset
  6484. gcode_M428();
  6485. break;
  6486. case 500: // M500 Store settings in EEPROM
  6487. gcode_M500();
  6488. break;
  6489. case 501: // M501 Read settings from EEPROM
  6490. gcode_M501();
  6491. break;
  6492. case 502: // M502 Revert to default settings
  6493. gcode_M502();
  6494. break;
  6495. case 503: // M503 print settings currently in memory
  6496. gcode_M503();
  6497. break;
  6498. #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
  6499. case 540:
  6500. gcode_M540();
  6501. break;
  6502. #endif
  6503. #if HAS_BED_PROBE
  6504. case 851:
  6505. gcode_M851();
  6506. break;
  6507. #endif // HAS_BED_PROBE
  6508. #if ENABLED(FILAMENT_CHANGE_FEATURE)
  6509. case 600: //Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
  6510. gcode_M600();
  6511. break;
  6512. #endif // FILAMENT_CHANGE_FEATURE
  6513. #if ENABLED(DUAL_X_CARRIAGE)
  6514. case 605:
  6515. gcode_M605();
  6516. break;
  6517. #endif // DUAL_X_CARRIAGE
  6518. #if ENABLED(LIN_ADVANCE)
  6519. case 905: // M905 Set advance factor.
  6520. gcode_M905();
  6521. break;
  6522. #endif
  6523. case 907: // M907 Set digital trimpot motor current using axis codes.
  6524. gcode_M907();
  6525. break;
  6526. #if HAS_DIGIPOTSS || ENABLED(DAC_STEPPER_CURRENT)
  6527. case 908: // M908 Control digital trimpot directly.
  6528. gcode_M908();
  6529. break;
  6530. #if ENABLED(DAC_STEPPER_CURRENT) // As with Printrbot RevF
  6531. case 909: // M909 Print digipot/DAC current value
  6532. gcode_M909();
  6533. break;
  6534. case 910: // M910 Commit digipot/DAC value to external EEPROM
  6535. gcode_M910();
  6536. break;
  6537. #endif
  6538. #endif // HAS_DIGIPOTSS || DAC_STEPPER_CURRENT
  6539. #if HAS_MICROSTEPS
  6540. case 350: // M350 Set microstepping mode. Warning: Steps per unit remains unchanged. S code sets stepping mode for all drivers.
  6541. gcode_M350();
  6542. break;
  6543. case 351: // M351 Toggle MS1 MS2 pins directly, S# determines MS1 or MS2, X# sets the pin high/low.
  6544. gcode_M351();
  6545. break;
  6546. #endif // HAS_MICROSTEPS
  6547. case 999: // M999: Restart after being Stopped
  6548. gcode_M999();
  6549. break;
  6550. }
  6551. break;
  6552. case 'T':
  6553. gcode_T(codenum);
  6554. break;
  6555. default: code_is_good = false;
  6556. }
  6557. KEEPALIVE_STATE(NOT_BUSY);
  6558. ExitUnknownCommand:
  6559. // Still unknown command? Throw an error
  6560. if (!code_is_good) unknown_command_error();
  6561. ok_to_send();
  6562. }
  6563. void FlushSerialRequestResend() {
  6564. //char command_queue[cmd_queue_index_r][100]="Resend:";
  6565. MYSERIAL.flush();
  6566. SERIAL_PROTOCOLPGM(MSG_RESEND);
  6567. SERIAL_PROTOCOLLN(gcode_LastN + 1);
  6568. ok_to_send();
  6569. }
  6570. void ok_to_send() {
  6571. refresh_cmd_timeout();
  6572. if (!send_ok[cmd_queue_index_r]) return;
  6573. SERIAL_PROTOCOLPGM(MSG_OK);
  6574. #if ENABLED(ADVANCED_OK)
  6575. char* p = command_queue[cmd_queue_index_r];
  6576. if (*p == 'N') {
  6577. SERIAL_PROTOCOL(' ');
  6578. SERIAL_ECHO(*p++);
  6579. while (NUMERIC_SIGNED(*p))
  6580. SERIAL_ECHO(*p++);
  6581. }
  6582. SERIAL_PROTOCOLPGM(" P"); SERIAL_PROTOCOL(int(BLOCK_BUFFER_SIZE - planner.movesplanned() - 1));
  6583. SERIAL_PROTOCOLPGM(" B"); SERIAL_PROTOCOL(BUFSIZE - commands_in_queue);
  6584. #endif
  6585. SERIAL_EOL;
  6586. }
  6587. #if ENABLED(min_software_endstops) || ENABLED(max_software_endstops)
  6588. void clamp_to_software_endstops(float target[XYZ]) {
  6589. #if ENABLED(min_software_endstops)
  6590. NOLESS(target[X_AXIS], soft_endstop_min[X_AXIS]);
  6591. NOLESS(target[Y_AXIS], soft_endstop_min[Y_AXIS]);
  6592. NOLESS(target[Z_AXIS], soft_endstop_min[Z_AXIS]);
  6593. #endif
  6594. #if ENABLED(max_software_endstops)
  6595. NOMORE(target[X_AXIS], soft_endstop_max[X_AXIS]);
  6596. NOMORE(target[Y_AXIS], soft_endstop_max[Y_AXIS]);
  6597. NOMORE(target[Z_AXIS], soft_endstop_max[Z_AXIS]);
  6598. #endif
  6599. }
  6600. #endif
  6601. #if ENABLED(DELTA)
  6602. void recalc_delta_settings(float radius, float diagonal_rod) {
  6603. delta_tower1_x = -SIN_60 * (radius + DELTA_RADIUS_TRIM_TOWER_1); // front left tower
  6604. delta_tower1_y = -COS_60 * (radius + DELTA_RADIUS_TRIM_TOWER_1);
  6605. delta_tower2_x = SIN_60 * (radius + DELTA_RADIUS_TRIM_TOWER_2); // front right tower
  6606. delta_tower2_y = -COS_60 * (radius + DELTA_RADIUS_TRIM_TOWER_2);
  6607. delta_tower3_x = 0.0; // back middle tower
  6608. delta_tower3_y = (radius + DELTA_RADIUS_TRIM_TOWER_3);
  6609. delta_diagonal_rod_2_tower_1 = sq(diagonal_rod + delta_diagonal_rod_trim_tower_1);
  6610. delta_diagonal_rod_2_tower_2 = sq(diagonal_rod + delta_diagonal_rod_trim_tower_2);
  6611. delta_diagonal_rod_2_tower_3 = sq(diagonal_rod + delta_diagonal_rod_trim_tower_3);
  6612. }
  6613. void inverse_kinematics(const float in_cartesian[XYZ]) {
  6614. const float cartesian[XYZ] = {
  6615. RAW_X_POSITION(in_cartesian[X_AXIS]),
  6616. RAW_Y_POSITION(in_cartesian[Y_AXIS]),
  6617. RAW_Z_POSITION(in_cartesian[Z_AXIS])
  6618. };
  6619. delta[TOWER_1] = sqrt(delta_diagonal_rod_2_tower_1
  6620. - sq(delta_tower1_x - cartesian[X_AXIS])
  6621. - sq(delta_tower1_y - cartesian[Y_AXIS])
  6622. ) + cartesian[Z_AXIS];
  6623. delta[TOWER_2] = sqrt(delta_diagonal_rod_2_tower_2
  6624. - sq(delta_tower2_x - cartesian[X_AXIS])
  6625. - sq(delta_tower2_y - cartesian[Y_AXIS])
  6626. ) + cartesian[Z_AXIS];
  6627. delta[TOWER_3] = sqrt(delta_diagonal_rod_2_tower_3
  6628. - sq(delta_tower3_x - cartesian[X_AXIS])
  6629. - sq(delta_tower3_y - cartesian[Y_AXIS])
  6630. ) + cartesian[Z_AXIS];
  6631. /**
  6632. SERIAL_ECHOPGM("cartesian x="); SERIAL_ECHO(cartesian[X_AXIS]);
  6633. SERIAL_ECHOPGM(" y="); SERIAL_ECHO(cartesian[Y_AXIS]);
  6634. SERIAL_ECHOPGM(" z="); SERIAL_ECHOLN(cartesian[Z_AXIS]);
  6635. SERIAL_ECHOPGM("delta a="); SERIAL_ECHO(delta[TOWER_1]);
  6636. SERIAL_ECHOPGM(" b="); SERIAL_ECHO(delta[TOWER_2]);
  6637. SERIAL_ECHOPGM(" c="); SERIAL_ECHOLN(delta[TOWER_3]);
  6638. */
  6639. }
  6640. float delta_safe_distance_from_top() {
  6641. float cartesian[XYZ] = {
  6642. LOGICAL_X_POSITION(0),
  6643. LOGICAL_Y_POSITION(0),
  6644. LOGICAL_Z_POSITION(0)
  6645. };
  6646. inverse_kinematics(cartesian);
  6647. float distance = delta[TOWER_3];
  6648. cartesian[Y_AXIS] = LOGICAL_Y_POSITION(DELTA_PRINTABLE_RADIUS);
  6649. inverse_kinematics(cartesian);
  6650. return abs(distance - delta[TOWER_3]);
  6651. }
  6652. void forward_kinematics_DELTA(float z1, float z2, float z3) {
  6653. //As discussed in Wikipedia "Trilateration"
  6654. //we are establishing a new coordinate
  6655. //system in the plane of the three carriage points.
  6656. //This system will have the origin at tower1 and
  6657. //tower2 is on the x axis. tower3 is in the X-Y
  6658. //plane with a Z component of zero. We will define unit
  6659. //vectors in this coordinate system in our original
  6660. //coordinate system. Then when we calculate the
  6661. //Xnew, Ynew and Znew values, we can translate back into
  6662. //the original system by moving along those unit vectors
  6663. //by the corresponding values.
  6664. // https://en.wikipedia.org/wiki/Trilateration
  6665. // Variable names matched to Marlin, c-version
  6666. // and avoiding a vector library
  6667. // by Andreas Hardtung 2016-06-7
  6668. // based on a Java function from
  6669. // "Delta Robot Kinematics by Steve Graves" V3
  6670. // Result is in cartesian_position[].
  6671. //Create a vector in old coordinates along x axis of new coordinate
  6672. float p12[3] = { delta_tower2_x - delta_tower1_x, delta_tower2_y - delta_tower1_y, z2 - z1 };
  6673. //Get the Magnitude of vector.
  6674. float d = sqrt( p12[0]*p12[0] + p12[1]*p12[1] + p12[2]*p12[2] );
  6675. //Create unit vector by dividing by magnitude.
  6676. float ex[3] = { p12[0]/d, p12[1]/d, p12[2]/d };
  6677. //Now find vector from the origin of the new system to the third point.
  6678. float p13[3] = { delta_tower3_x - delta_tower1_x, delta_tower3_y - delta_tower1_y, z3 - z1 };
  6679. //Now use dot product to find the component of this vector on the X axis.
  6680. float i = ex[0]*p13[0] + ex[1]*p13[1] + ex[2]*p13[2];
  6681. //Now create a vector along the x axis that represents the x component of p13.
  6682. float iex[3] = { ex[0]*i, ex[1]*i, ex[2]*i };
  6683. //Now subtract the X component away from the original vector leaving only the Y component. We use the
  6684. //variable that will be the unit vector after we scale it.
  6685. float ey[3] = { p13[0] - iex[0], p13[1] - iex[1], p13[2] - iex[2]};
  6686. //The magnitude of Y component
  6687. float j = sqrt(sq(ey[0]) + sq(ey[1]) + sq(ey[2]));
  6688. //Now make vector a unit vector
  6689. ey[0] /= j; ey[1] /= j; ey[2] /= j;
  6690. //The cross product of the unit x and y is the unit z
  6691. //float[] ez = vectorCrossProd(ex, ey);
  6692. float ez[3] = { ex[1]*ey[2] - ex[2]*ey[1], ex[2]*ey[0] - ex[0]*ey[2], ex[0]*ey[1] - ex[1]*ey[0] };
  6693. //Now we have the d, i and j values defined in Wikipedia.
  6694. //We can plug them into the equations defined in
  6695. //Wikipedia for Xnew, Ynew and Znew
  6696. float Xnew = (delta_diagonal_rod_2_tower_1 - delta_diagonal_rod_2_tower_2 + d*d)/(d*2);
  6697. float Ynew = ((delta_diagonal_rod_2_tower_1 - delta_diagonal_rod_2_tower_3 + i*i + j*j)/2 - i*Xnew) /j;
  6698. float Znew = sqrt(delta_diagonal_rod_2_tower_1 - Xnew*Xnew - Ynew*Ynew);
  6699. //Now we can start from the origin in the old coords and
  6700. //add vectors in the old coords that represent the
  6701. //Xnew, Ynew and Znew to find the point in the old system
  6702. cartesian_position[X_AXIS] = delta_tower1_x + ex[0]*Xnew + ey[0]*Ynew - ez[0]*Znew;
  6703. cartesian_position[Y_AXIS] = delta_tower1_y + ex[1]*Xnew + ey[1]*Ynew - ez[1]*Znew;
  6704. cartesian_position[Z_AXIS] = z1 + ex[2]*Xnew + ey[2]*Ynew - ez[2]*Znew;
  6705. };
  6706. void forward_kinematics_DELTA(float point[ABC]) {
  6707. forward_kinematics_DELTA(point[A_AXIS], point[B_AXIS], point[C_AXIS]);
  6708. }
  6709. void set_cartesian_from_steppers() {
  6710. forward_kinematics_DELTA(stepper.get_axis_position_mm(A_AXIS),
  6711. stepper.get_axis_position_mm(B_AXIS),
  6712. stepper.get_axis_position_mm(C_AXIS));
  6713. }
  6714. #if ENABLED(AUTO_BED_LEVELING_FEATURE)
  6715. // Adjust print surface height by linear interpolation over the bed_level array.
  6716. void adjust_delta(float cartesian[XYZ]) {
  6717. if (delta_grid_spacing[X_AXIS] == 0 || delta_grid_spacing[Y_AXIS] == 0) return; // G29 not done!
  6718. int half = (AUTO_BED_LEVELING_GRID_POINTS - 1) / 2;
  6719. float h1 = 0.001 - half, h2 = half - 0.001,
  6720. grid_x = max(h1, min(h2, RAW_X_POSITION(cartesian[X_AXIS]) / delta_grid_spacing[X_AXIS])),
  6721. grid_y = max(h1, min(h2, RAW_Y_POSITION(cartesian[Y_AXIS]) / delta_grid_spacing[Y_AXIS]));
  6722. int floor_x = floor(grid_x), floor_y = floor(grid_y);
  6723. float ratio_x = grid_x - floor_x, ratio_y = grid_y - floor_y,
  6724. z1 = bed_level[floor_x + half][floor_y + half],
  6725. z2 = bed_level[floor_x + half][floor_y + half + 1],
  6726. z3 = bed_level[floor_x + half + 1][floor_y + half],
  6727. z4 = bed_level[floor_x + half + 1][floor_y + half + 1],
  6728. left = (1 - ratio_y) * z1 + ratio_y * z2,
  6729. right = (1 - ratio_y) * z3 + ratio_y * z4,
  6730. offset = (1 - ratio_x) * left + ratio_x * right;
  6731. delta[X_AXIS] += offset;
  6732. delta[Y_AXIS] += offset;
  6733. delta[Z_AXIS] += offset;
  6734. /**
  6735. SERIAL_ECHOPGM("grid_x="); SERIAL_ECHO(grid_x);
  6736. SERIAL_ECHOPGM(" grid_y="); SERIAL_ECHO(grid_y);
  6737. SERIAL_ECHOPGM(" floor_x="); SERIAL_ECHO(floor_x);
  6738. SERIAL_ECHOPGM(" floor_y="); SERIAL_ECHO(floor_y);
  6739. SERIAL_ECHOPGM(" ratio_x="); SERIAL_ECHO(ratio_x);
  6740. SERIAL_ECHOPGM(" ratio_y="); SERIAL_ECHO(ratio_y);
  6741. SERIAL_ECHOPGM(" z1="); SERIAL_ECHO(z1);
  6742. SERIAL_ECHOPGM(" z2="); SERIAL_ECHO(z2);
  6743. SERIAL_ECHOPGM(" z3="); SERIAL_ECHO(z3);
  6744. SERIAL_ECHOPGM(" z4="); SERIAL_ECHO(z4);
  6745. SERIAL_ECHOPGM(" left="); SERIAL_ECHO(left);
  6746. SERIAL_ECHOPGM(" right="); SERIAL_ECHO(right);
  6747. SERIAL_ECHOPGM(" offset="); SERIAL_ECHOLN(offset);
  6748. */
  6749. }
  6750. #endif // AUTO_BED_LEVELING_FEATURE
  6751. #endif // DELTA
  6752. void set_current_from_steppers_for_axis(AxisEnum axis) {
  6753. #if ENABLED(DELTA)
  6754. set_cartesian_from_steppers();
  6755. current_position[axis] = LOGICAL_POSITION(cartesian_position[axis], axis);
  6756. #elif ENABLED(AUTO_BED_LEVELING_FEATURE)
  6757. vector_3 pos = planner.adjusted_position();
  6758. current_position[axis] = axis == X_AXIS ? pos.x : axis == Y_AXIS ? pos.y : pos.z;
  6759. #else
  6760. current_position[axis] = stepper.get_axis_position_mm(axis); // CORE handled transparently
  6761. #endif
  6762. }
  6763. #if ENABLED(MESH_BED_LEVELING)
  6764. // This function is used to split lines on mesh borders so each segment is only part of one mesh area
  6765. void mesh_line_to_destination(float fr_mm_s, uint8_t x_splits = 0xff, uint8_t y_splits = 0xff) {
  6766. int cx1 = mbl.cell_index_x(RAW_CURRENT_POSITION(X_AXIS)),
  6767. cy1 = mbl.cell_index_y(RAW_CURRENT_POSITION(Y_AXIS)),
  6768. cx2 = mbl.cell_index_x(RAW_X_POSITION(destination[X_AXIS])),
  6769. cy2 = mbl.cell_index_y(RAW_Y_POSITION(destination[Y_AXIS]));
  6770. NOMORE(cx1, MESH_NUM_X_POINTS - 2);
  6771. NOMORE(cy1, MESH_NUM_Y_POINTS - 2);
  6772. NOMORE(cx2, MESH_NUM_X_POINTS - 2);
  6773. NOMORE(cy2, MESH_NUM_Y_POINTS - 2);
  6774. if (cx1 == cx2 && cy1 == cy2) {
  6775. // Start and end on same mesh square
  6776. line_to_destination(fr_mm_s);
  6777. set_current_to_destination();
  6778. return;
  6779. }
  6780. #define MBL_SEGMENT_END(A) (current_position[A ##_AXIS] + (destination[A ##_AXIS] - current_position[A ##_AXIS]) * normalized_dist)
  6781. float normalized_dist, end[NUM_AXIS];
  6782. // Split at the left/front border of the right/top square
  6783. int8_t gcx = max(cx1, cx2), gcy = max(cy1, cy2);
  6784. if (cx2 != cx1 && TEST(x_splits, gcx)) {
  6785. memcpy(end, destination, sizeof(end));
  6786. destination[X_AXIS] = LOGICAL_X_POSITION(mbl.get_probe_x(gcx));
  6787. normalized_dist = (destination[X_AXIS] - current_position[X_AXIS]) / (end[X_AXIS] - current_position[X_AXIS]);
  6788. destination[Y_AXIS] = MBL_SEGMENT_END(Y);
  6789. CBI(x_splits, gcx);
  6790. }
  6791. else if (cy2 != cy1 && TEST(y_splits, gcy)) {
  6792. memcpy(end, destination, sizeof(end));
  6793. destination[Y_AXIS] = LOGICAL_Y_POSITION(mbl.get_probe_y(gcy));
  6794. normalized_dist = (destination[Y_AXIS] - current_position[Y_AXIS]) / (end[Y_AXIS] - current_position[Y_AXIS]);
  6795. destination[X_AXIS] = MBL_SEGMENT_END(X);
  6796. CBI(y_splits, gcy);
  6797. }
  6798. else {
  6799. // Already split on a border
  6800. line_to_destination(fr_mm_s);
  6801. set_current_to_destination();
  6802. return;
  6803. }
  6804. destination[Z_AXIS] = MBL_SEGMENT_END(Z);
  6805. destination[E_AXIS] = MBL_SEGMENT_END(E);
  6806. // Do the split and look for more borders
  6807. mesh_line_to_destination(fr_mm_s, x_splits, y_splits);
  6808. // Restore destination from stack
  6809. memcpy(destination, end, sizeof(end));
  6810. mesh_line_to_destination(fr_mm_s, x_splits, y_splits);
  6811. }
  6812. #endif // MESH_BED_LEVELING
  6813. #if ENABLED(DELTA) || ENABLED(SCARA)
  6814. inline bool prepare_kinematic_move_to(float target[NUM_AXIS]) {
  6815. float difference[NUM_AXIS];
  6816. LOOP_XYZE(i) difference[i] = target[i] - current_position[i];
  6817. float cartesian_mm = sqrt(sq(difference[X_AXIS]) + sq(difference[Y_AXIS]) + sq(difference[Z_AXIS]));
  6818. if (cartesian_mm < 0.000001) cartesian_mm = abs(difference[E_AXIS]);
  6819. if (cartesian_mm < 0.000001) return false;
  6820. float _feedrate_mm_s = MMS_SCALED(feedrate_mm_s);
  6821. float seconds = cartesian_mm / _feedrate_mm_s;
  6822. int steps = max(1, int(delta_segments_per_second * seconds));
  6823. float inv_steps = 1.0/steps;
  6824. // SERIAL_ECHOPGM("mm="); SERIAL_ECHO(cartesian_mm);
  6825. // SERIAL_ECHOPGM(" seconds="); SERIAL_ECHO(seconds);
  6826. // SERIAL_ECHOPGM(" steps="); SERIAL_ECHOLN(steps);
  6827. for (int s = 1; s <= steps; s++) {
  6828. float fraction = float(s) * inv_steps;
  6829. LOOP_XYZE(i)
  6830. target[i] = current_position[i] + difference[i] * fraction;
  6831. inverse_kinematics(target);
  6832. #if ENABLED(DELTA) && ENABLED(AUTO_BED_LEVELING_FEATURE)
  6833. if (!bed_leveling_in_progress) adjust_delta(target);
  6834. #endif
  6835. //DEBUG_POS("prepare_kinematic_move_to", target);
  6836. //DEBUG_POS("prepare_kinematic_move_to", delta);
  6837. planner.buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], target[E_AXIS], _feedrate_mm_s, active_extruder);
  6838. }
  6839. return true;
  6840. }
  6841. #endif // DELTA || SCARA
  6842. #if ENABLED(DUAL_X_CARRIAGE)
  6843. inline bool prepare_move_to_destination_dualx() {
  6844. if (active_extruder_parked) {
  6845. if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && active_extruder == 0) {
  6846. // move duplicate extruder into correct duplication position.
  6847. planner.set_position_mm(
  6848. LOGICAL_X_POSITION(inactive_extruder_x_pos),
  6849. current_position[Y_AXIS],
  6850. current_position[Z_AXIS],
  6851. current_position[E_AXIS]
  6852. );
  6853. planner.buffer_line(current_position[X_AXIS] + duplicate_extruder_x_offset,
  6854. current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], planner.max_feedrate_mm_s[X_AXIS], 1);
  6855. SYNC_PLAN_POSITION_KINEMATIC();
  6856. stepper.synchronize();
  6857. extruder_duplication_enabled = true;
  6858. active_extruder_parked = false;
  6859. }
  6860. else if (dual_x_carriage_mode == DXC_AUTO_PARK_MODE) { // handle unparking of head
  6861. if (current_position[E_AXIS] == destination[E_AXIS]) {
  6862. // This is a travel move (with no extrusion)
  6863. // Skip it, but keep track of the current position
  6864. // (so it can be used as the start of the next non-travel move)
  6865. if (delayed_move_time != 0xFFFFFFFFUL) {
  6866. set_current_to_destination();
  6867. NOLESS(raised_parked_position[Z_AXIS], destination[Z_AXIS]);
  6868. delayed_move_time = millis();
  6869. return false;
  6870. }
  6871. }
  6872. delayed_move_time = 0;
  6873. // unpark extruder: 1) raise, 2) move into starting XY position, 3) lower
  6874. planner.buffer_line(raised_parked_position[X_AXIS], raised_parked_position[Y_AXIS], raised_parked_position[Z_AXIS], current_position[E_AXIS], planner.max_feedrate_mm_s[Z_AXIS], active_extruder);
  6875. planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], raised_parked_position[Z_AXIS], current_position[E_AXIS], PLANNER_XY_FEEDRATE(), active_extruder);
  6876. planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], planner.max_feedrate_mm_s[Z_AXIS], active_extruder);
  6877. active_extruder_parked = false;
  6878. }
  6879. }
  6880. return true;
  6881. }
  6882. #endif // DUAL_X_CARRIAGE
  6883. #if DISABLED(DELTA) && DISABLED(SCARA)
  6884. inline bool prepare_move_to_destination_cartesian() {
  6885. // Do not use feedrate_percentage for E or Z only moves
  6886. if (current_position[X_AXIS] == destination[X_AXIS] && current_position[Y_AXIS] == destination[Y_AXIS]) {
  6887. line_to_destination();
  6888. }
  6889. else {
  6890. #if ENABLED(MESH_BED_LEVELING)
  6891. if (mbl.active()) {
  6892. mesh_line_to_destination(MMS_SCALED(feedrate_mm_s));
  6893. return false;
  6894. }
  6895. else
  6896. #endif
  6897. line_to_destination(MMS_SCALED(feedrate_mm_s));
  6898. }
  6899. return true;
  6900. }
  6901. #endif // !DELTA && !SCARA
  6902. #if ENABLED(PREVENT_COLD_EXTRUSION)
  6903. inline void prevent_dangerous_extrude(float& curr_e, float& dest_e) {
  6904. if (DEBUGGING(DRYRUN)) return;
  6905. float de = dest_e - curr_e;
  6906. if (de) {
  6907. if (thermalManager.tooColdToExtrude(active_extruder)) {
  6908. curr_e = dest_e; // Behave as if the move really took place, but ignore E part
  6909. SERIAL_ECHO_START;
  6910. SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP);
  6911. }
  6912. #if ENABLED(PREVENT_LENGTHY_EXTRUDE)
  6913. if (labs(de) > EXTRUDE_MAXLENGTH) {
  6914. curr_e = dest_e; // Behave as if the move really took place, but ignore E part
  6915. SERIAL_ECHO_START;
  6916. SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP);
  6917. }
  6918. #endif
  6919. }
  6920. }
  6921. #endif // PREVENT_COLD_EXTRUSION
  6922. /**
  6923. * Prepare a single move and get ready for the next one
  6924. *
  6925. * (This may call planner.buffer_line several times to put
  6926. * smaller moves into the planner for DELTA or SCARA.)
  6927. */
  6928. void prepare_move_to_destination() {
  6929. clamp_to_software_endstops(destination);
  6930. refresh_cmd_timeout();
  6931. #if ENABLED(PREVENT_COLD_EXTRUSION)
  6932. prevent_dangerous_extrude(current_position[E_AXIS], destination[E_AXIS]);
  6933. #endif
  6934. #if ENABLED(DELTA) || ENABLED(SCARA)
  6935. if (!prepare_kinematic_move_to(destination)) return;
  6936. #else
  6937. #if ENABLED(DUAL_X_CARRIAGE)
  6938. if (!prepare_move_to_destination_dualx()) return;
  6939. #endif
  6940. if (!prepare_move_to_destination_cartesian()) return;
  6941. #endif
  6942. set_current_to_destination();
  6943. }
  6944. #if ENABLED(ARC_SUPPORT)
  6945. /**
  6946. * Plan an arc in 2 dimensions
  6947. *
  6948. * The arc is approximated by generating many small linear segments.
  6949. * The length of each segment is configured in MM_PER_ARC_SEGMENT (Default 1mm)
  6950. * Arcs should only be made relatively large (over 5mm), as larger arcs with
  6951. * larger segments will tend to be more efficient. Your slicer should have
  6952. * options for G2/G3 arc generation. In future these options may be GCode tunable.
  6953. */
  6954. void plan_arc(
  6955. float target[NUM_AXIS], // Destination position
  6956. float* offset, // Center of rotation relative to current_position
  6957. uint8_t clockwise // Clockwise?
  6958. ) {
  6959. float radius = HYPOT(offset[X_AXIS], offset[Y_AXIS]),
  6960. center_X = current_position[X_AXIS] + offset[X_AXIS],
  6961. center_Y = current_position[Y_AXIS] + offset[Y_AXIS],
  6962. linear_travel = target[Z_AXIS] - current_position[Z_AXIS],
  6963. extruder_travel = target[E_AXIS] - current_position[E_AXIS],
  6964. r_X = -offset[X_AXIS], // Radius vector from center to current location
  6965. r_Y = -offset[Y_AXIS],
  6966. rt_X = target[X_AXIS] - center_X,
  6967. rt_Y = target[Y_AXIS] - center_Y;
  6968. // CCW angle of rotation between position and target from the circle center. Only one atan2() trig computation required.
  6969. float angular_travel = atan2(r_X * rt_Y - r_Y * rt_X, r_X * rt_X + r_Y * rt_Y);
  6970. if (angular_travel < 0) angular_travel += RADIANS(360);
  6971. if (clockwise) angular_travel -= RADIANS(360);
  6972. // Make a circle if the angular rotation is 0
  6973. if (angular_travel == 0 && current_position[X_AXIS] == target[X_AXIS] && current_position[Y_AXIS] == target[Y_AXIS])
  6974. angular_travel += RADIANS(360);
  6975. float mm_of_travel = HYPOT(angular_travel * radius, fabs(linear_travel));
  6976. if (mm_of_travel < 0.001) return;
  6977. uint16_t segments = floor(mm_of_travel / (MM_PER_ARC_SEGMENT));
  6978. if (segments == 0) segments = 1;
  6979. float theta_per_segment = angular_travel / segments;
  6980. float linear_per_segment = linear_travel / segments;
  6981. float extruder_per_segment = extruder_travel / segments;
  6982. /**
  6983. * Vector rotation by transformation matrix: r is the original vector, r_T is the rotated vector,
  6984. * and phi is the angle of rotation. Based on the solution approach by Jens Geisler.
  6985. * r_T = [cos(phi) -sin(phi);
  6986. * sin(phi) cos(phi] * r ;
  6987. *
  6988. * For arc generation, the center of the circle is the axis of rotation and the radius vector is
  6989. * defined from the circle center to the initial position. Each line segment is formed by successive
  6990. * vector rotations. This requires only two cos() and sin() computations to form the rotation
  6991. * matrix for the duration of the entire arc. Error may accumulate from numerical round-off, since
  6992. * all double numbers are single precision on the Arduino. (True double precision will not have
  6993. * round off issues for CNC applications.) Single precision error can accumulate to be greater than
  6994. * tool precision in some cases. Therefore, arc path correction is implemented.
  6995. *
  6996. * Small angle approximation may be used to reduce computation overhead further. This approximation
  6997. * holds for everything, but very small circles and large MM_PER_ARC_SEGMENT values. In other words,
  6998. * theta_per_segment would need to be greater than 0.1 rad and N_ARC_CORRECTION would need to be large
  6999. * to cause an appreciable drift error. N_ARC_CORRECTION~=25 is more than small enough to correct for
  7000. * numerical drift error. N_ARC_CORRECTION may be on the order a hundred(s) before error becomes an
  7001. * issue for CNC machines with the single precision Arduino calculations.
  7002. *
  7003. * This approximation also allows plan_arc to immediately insert a line segment into the planner
  7004. * without the initial overhead of computing cos() or sin(). By the time the arc needs to be applied
  7005. * a correction, the planner should have caught up to the lag caused by the initial plan_arc overhead.
  7006. * This is important when there are successive arc motions.
  7007. */
  7008. // Vector rotation matrix values
  7009. float cos_T = 1 - 0.5 * sq(theta_per_segment); // Small angle approximation
  7010. float sin_T = theta_per_segment;
  7011. float arc_target[NUM_AXIS];
  7012. float sin_Ti, cos_Ti, r_new_Y;
  7013. uint16_t i;
  7014. int8_t count = 0;
  7015. // Initialize the linear axis
  7016. arc_target[Z_AXIS] = current_position[Z_AXIS];
  7017. // Initialize the extruder axis
  7018. arc_target[E_AXIS] = current_position[E_AXIS];
  7019. float fr_mm_s = MMS_SCALED(feedrate_mm_s);
  7020. millis_t next_idle_ms = millis() + 200UL;
  7021. for (i = 1; i < segments; i++) { // Iterate (segments-1) times
  7022. thermalManager.manage_heater();
  7023. millis_t now = millis();
  7024. if (ELAPSED(now, next_idle_ms)) {
  7025. next_idle_ms = now + 200UL;
  7026. idle();
  7027. }
  7028. if (++count < N_ARC_CORRECTION) {
  7029. // Apply vector rotation matrix to previous r_X / 1
  7030. r_new_Y = r_X * sin_T + r_Y * cos_T;
  7031. r_X = r_X * cos_T - r_Y * sin_T;
  7032. r_Y = r_new_Y;
  7033. }
  7034. else {
  7035. // Arc correction to radius vector. Computed only every N_ARC_CORRECTION increments.
  7036. // Compute exact location by applying transformation matrix from initial radius vector(=-offset).
  7037. // To reduce stuttering, the sin and cos could be computed at different times.
  7038. // For now, compute both at the same time.
  7039. cos_Ti = cos(i * theta_per_segment);
  7040. sin_Ti = sin(i * theta_per_segment);
  7041. r_X = -offset[X_AXIS] * cos_Ti + offset[Y_AXIS] * sin_Ti;
  7042. r_Y = -offset[X_AXIS] * sin_Ti - offset[Y_AXIS] * cos_Ti;
  7043. count = 0;
  7044. }
  7045. // Update arc_target location
  7046. arc_target[X_AXIS] = center_X + r_X;
  7047. arc_target[Y_AXIS] = center_Y + r_Y;
  7048. arc_target[Z_AXIS] += linear_per_segment;
  7049. arc_target[E_AXIS] += extruder_per_segment;
  7050. clamp_to_software_endstops(arc_target);
  7051. #if ENABLED(DELTA) || ENABLED(SCARA)
  7052. inverse_kinematics(arc_target);
  7053. #if ENABLED(DELTA) && ENABLED(AUTO_BED_LEVELING_FEATURE)
  7054. adjust_delta(arc_target);
  7055. #endif
  7056. planner.buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], arc_target[E_AXIS], fr_mm_s, active_extruder);
  7057. #else
  7058. planner.buffer_line(arc_target[X_AXIS], arc_target[Y_AXIS], arc_target[Z_AXIS], arc_target[E_AXIS], fr_mm_s, active_extruder);
  7059. #endif
  7060. }
  7061. // Ensure last segment arrives at target location.
  7062. #if ENABLED(DELTA) || ENABLED(SCARA)
  7063. inverse_kinematics(target);
  7064. #if ENABLED(DELTA) && ENABLED(AUTO_BED_LEVELING_FEATURE)
  7065. adjust_delta(target);
  7066. #endif
  7067. planner.buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], target[E_AXIS], fr_mm_s, active_extruder);
  7068. #else
  7069. planner.buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], fr_mm_s, active_extruder);
  7070. #endif
  7071. // As far as the parser is concerned, the position is now == target. In reality the
  7072. // motion control system might still be processing the action and the real tool position
  7073. // in any intermediate location.
  7074. set_current_to_destination();
  7075. }
  7076. #endif
  7077. #if ENABLED(BEZIER_CURVE_SUPPORT)
  7078. void plan_cubic_move(const float offset[4]) {
  7079. cubic_b_spline(current_position, destination, offset, MMS_SCALED(feedrate_mm_s), active_extruder);
  7080. // As far as the parser is concerned, the position is now == target. In reality the
  7081. // motion control system might still be processing the action and the real tool position
  7082. // in any intermediate location.
  7083. set_current_to_destination();
  7084. }
  7085. #endif // BEZIER_CURVE_SUPPORT
  7086. #if HAS_CONTROLLERFAN
  7087. void controllerFan() {
  7088. static millis_t lastMotorOn = 0; // Last time a motor was turned on
  7089. static millis_t nextMotorCheck = 0; // Last time the state was checked
  7090. millis_t ms = millis();
  7091. if (ELAPSED(ms, nextMotorCheck)) {
  7092. nextMotorCheck = ms + 2500UL; // Not a time critical function, so only check every 2.5s
  7093. if (X_ENABLE_READ == X_ENABLE_ON || Y_ENABLE_READ == Y_ENABLE_ON || Z_ENABLE_READ == Z_ENABLE_ON || thermalManager.soft_pwm_bed > 0
  7094. || E0_ENABLE_READ == E_ENABLE_ON // If any of the drivers are enabled...
  7095. #if E_STEPPERS > 1
  7096. || E1_ENABLE_READ == E_ENABLE_ON
  7097. #if HAS_X2_ENABLE
  7098. || X2_ENABLE_READ == X_ENABLE_ON
  7099. #endif
  7100. #if E_STEPPERS > 2
  7101. || E2_ENABLE_READ == E_ENABLE_ON
  7102. #if E_STEPPERS > 3
  7103. || E3_ENABLE_READ == E_ENABLE_ON
  7104. #endif
  7105. #endif
  7106. #endif
  7107. ) {
  7108. lastMotorOn = ms; //... set time to NOW so the fan will turn on
  7109. }
  7110. // Fan off if no steppers have been enabled for CONTROLLERFAN_SECS seconds
  7111. uint8_t speed = (!lastMotorOn || ELAPSED(ms, lastMotorOn + (CONTROLLERFAN_SECS) * 1000UL)) ? 0 : CONTROLLERFAN_SPEED;
  7112. // allows digital or PWM fan output to be used (see M42 handling)
  7113. digitalWrite(CONTROLLERFAN_PIN, speed);
  7114. analogWrite(CONTROLLERFAN_PIN, speed);
  7115. }
  7116. }
  7117. #endif // HAS_CONTROLLERFAN
  7118. #if ENABLED(SCARA)
  7119. void forward_kinematics_SCARA(float f_scara[ABC]) {
  7120. // Perform forward kinematics, and place results in delta[]
  7121. // The maths and first version has been done by QHARLEY . Integrated into masterbranch 06/2014 and slightly restructured by Joachim Cerny in June 2014
  7122. float x_sin, x_cos, y_sin, y_cos;
  7123. //SERIAL_ECHOPGM("f_delta x="); SERIAL_ECHO(f_scara[X_AXIS]);
  7124. //SERIAL_ECHOPGM(" y="); SERIAL_ECHO(f_scara[Y_AXIS]);
  7125. x_sin = sin(f_scara[X_AXIS] / SCARA_RAD2DEG) * Linkage_1;
  7126. x_cos = cos(f_scara[X_AXIS] / SCARA_RAD2DEG) * Linkage_1;
  7127. y_sin = sin(f_scara[Y_AXIS] / SCARA_RAD2DEG) * Linkage_2;
  7128. y_cos = cos(f_scara[Y_AXIS] / SCARA_RAD2DEG) * Linkage_2;
  7129. //SERIAL_ECHOPGM(" x_sin="); SERIAL_ECHO(x_sin);
  7130. //SERIAL_ECHOPGM(" x_cos="); SERIAL_ECHO(x_cos);
  7131. //SERIAL_ECHOPGM(" y_sin="); SERIAL_ECHO(y_sin);
  7132. //SERIAL_ECHOPGM(" y_cos="); SERIAL_ECHOLN(y_cos);
  7133. delta[X_AXIS] = x_cos + y_cos + SCARA_offset_x; //theta
  7134. delta[Y_AXIS] = x_sin + y_sin + SCARA_offset_y; //theta+phi
  7135. //SERIAL_ECHOPGM(" delta[X_AXIS]="); SERIAL_ECHO(delta[X_AXIS]);
  7136. //SERIAL_ECHOPGM(" delta[Y_AXIS]="); SERIAL_ECHOLN(delta[Y_AXIS]);
  7137. }
  7138. void inverse_kinematics(const float cartesian[XYZ]) {
  7139. // Inverse kinematics.
  7140. // Perform SCARA IK and place results in delta[].
  7141. // The maths and first version were done by QHARLEY.
  7142. // Integrated, tweaked by Joachim Cerny in June 2014.
  7143. float SCARA_pos[2];
  7144. static float SCARA_C2, SCARA_S2, SCARA_K1, SCARA_K2, SCARA_theta, SCARA_psi;
  7145. SCARA_pos[X_AXIS] = RAW_X_POSITION(cartesian[X_AXIS]) * axis_scaling[X_AXIS] - SCARA_offset_x; //Translate SCARA to standard X Y
  7146. SCARA_pos[Y_AXIS] = RAW_Y_POSITION(cartesian[Y_AXIS]) * axis_scaling[Y_AXIS] - SCARA_offset_y; // With scaling factor.
  7147. #if (Linkage_1 == Linkage_2)
  7148. SCARA_C2 = ((sq(SCARA_pos[X_AXIS]) + sq(SCARA_pos[Y_AXIS])) / (2 * (float)L1_2)) - 1;
  7149. #else
  7150. SCARA_C2 = (sq(SCARA_pos[X_AXIS]) + sq(SCARA_pos[Y_AXIS]) - (float)L1_2 - (float)L2_2) / 45000;
  7151. #endif
  7152. SCARA_S2 = sqrt(1 - sq(SCARA_C2));
  7153. SCARA_K1 = Linkage_1 + Linkage_2 * SCARA_C2;
  7154. SCARA_K2 = Linkage_2 * SCARA_S2;
  7155. SCARA_theta = (atan2(SCARA_pos[X_AXIS], SCARA_pos[Y_AXIS]) - atan2(SCARA_K1, SCARA_K2)) * -1;
  7156. SCARA_psi = atan2(SCARA_S2, SCARA_C2);
  7157. delta[X_AXIS] = SCARA_theta * SCARA_RAD2DEG; // Multiply by 180/Pi - theta is support arm angle
  7158. delta[Y_AXIS] = (SCARA_theta + SCARA_psi) * SCARA_RAD2DEG; // - equal to sub arm angle (inverted motor)
  7159. delta[Z_AXIS] = RAW_Z_POSITION(cartesian[Z_AXIS]);
  7160. /**
  7161. SERIAL_ECHOPGM("cartesian x="); SERIAL_ECHO(cartesian[X_AXIS]);
  7162. SERIAL_ECHOPGM(" y="); SERIAL_ECHO(cartesian[Y_AXIS]);
  7163. SERIAL_ECHOPGM(" z="); SERIAL_ECHOLN(cartesian[Z_AXIS]);
  7164. SERIAL_ECHOPGM("scara x="); SERIAL_ECHO(SCARA_pos[X_AXIS]);
  7165. SERIAL_ECHOPGM(" y="); SERIAL_ECHOLN(SCARA_pos[Y_AXIS]);
  7166. SERIAL_ECHOPGM("delta x="); SERIAL_ECHO(delta[X_AXIS]);
  7167. SERIAL_ECHOPGM(" y="); SERIAL_ECHO(delta[Y_AXIS]);
  7168. SERIAL_ECHOPGM(" z="); SERIAL_ECHOLN(delta[Z_AXIS]);
  7169. SERIAL_ECHOPGM("C2="); SERIAL_ECHO(SCARA_C2);
  7170. SERIAL_ECHOPGM(" S2="); SERIAL_ECHO(SCARA_S2);
  7171. SERIAL_ECHOPGM(" Theta="); SERIAL_ECHO(SCARA_theta);
  7172. SERIAL_ECHOPGM(" Psi="); SERIAL_ECHOLN(SCARA_psi);
  7173. SERIAL_EOL;
  7174. */
  7175. }
  7176. #endif // SCARA
  7177. #if ENABLED(TEMP_STAT_LEDS)
  7178. static bool red_led = false;
  7179. static millis_t next_status_led_update_ms = 0;
  7180. void handle_status_leds(void) {
  7181. if (ELAPSED(millis(), next_status_led_update_ms)) {
  7182. next_status_led_update_ms += 500; // Update every 0.5s
  7183. float max_temp = 0.0;
  7184. #if HAS_TEMP_BED
  7185. max_temp = MAX3(max_temp, thermalManager.degTargetBed(), thermalManager.degBed());
  7186. #endif
  7187. HOTEND_LOOP() {
  7188. max_temp = MAX3(max_temp, thermalManager.degHotend(e), thermalManager.degTargetHotend(e));
  7189. }
  7190. bool new_led = (max_temp > 55.0) ? true : (max_temp < 54.0) ? false : red_led;
  7191. if (new_led != red_led) {
  7192. red_led = new_led;
  7193. digitalWrite(STAT_LED_RED, new_led ? HIGH : LOW);
  7194. digitalWrite(STAT_LED_BLUE, new_led ? LOW : HIGH);
  7195. }
  7196. }
  7197. }
  7198. #endif
  7199. void enable_all_steppers() {
  7200. enable_x();
  7201. enable_y();
  7202. enable_z();
  7203. enable_e0();
  7204. enable_e1();
  7205. enable_e2();
  7206. enable_e3();
  7207. }
  7208. void disable_all_steppers() {
  7209. disable_x();
  7210. disable_y();
  7211. disable_z();
  7212. disable_e0();
  7213. disable_e1();
  7214. disable_e2();
  7215. disable_e3();
  7216. }
  7217. /**
  7218. * Standard idle routine keeps the machine alive
  7219. */
  7220. void idle(
  7221. #if ENABLED(FILAMENT_CHANGE_FEATURE)
  7222. bool no_stepper_sleep/*=false*/
  7223. #endif
  7224. ) {
  7225. lcd_update();
  7226. host_keepalive();
  7227. manage_inactivity(
  7228. #if ENABLED(FILAMENT_CHANGE_FEATURE)
  7229. no_stepper_sleep
  7230. #endif
  7231. );
  7232. thermalManager.manage_heater();
  7233. #if ENABLED(PRINTCOUNTER)
  7234. print_job_timer.tick();
  7235. #endif
  7236. #if HAS_BUZZER && PIN_EXISTS(BEEPER)
  7237. buzzer.tick();
  7238. #endif
  7239. }
  7240. /**
  7241. * Manage several activities:
  7242. * - Check for Filament Runout
  7243. * - Keep the command buffer full
  7244. * - Check for maximum inactive time between commands
  7245. * - Check for maximum inactive time between stepper commands
  7246. * - Check if pin CHDK needs to go LOW
  7247. * - Check for KILL button held down
  7248. * - Check for HOME button held down
  7249. * - Check if cooling fan needs to be switched on
  7250. * - Check if an idle but hot extruder needs filament extruded (EXTRUDER_RUNOUT_PREVENT)
  7251. */
  7252. void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
  7253. #if ENABLED(FILAMENT_RUNOUT_SENSOR)
  7254. if ((IS_SD_PRINTING || print_job_timer.isRunning()) && !(READ(FIL_RUNOUT_PIN) ^ FIL_RUNOUT_INVERTING))
  7255. handle_filament_runout();
  7256. #endif
  7257. if (commands_in_queue < BUFSIZE) get_available_commands();
  7258. millis_t ms = millis();
  7259. if (max_inactive_time && ELAPSED(ms, previous_cmd_ms + max_inactive_time)) kill(PSTR(MSG_KILLED));
  7260. if (stepper_inactive_time && ELAPSED(ms, previous_cmd_ms + stepper_inactive_time)
  7261. && !ignore_stepper_queue && !planner.blocks_queued()) {
  7262. #if ENABLED(DISABLE_INACTIVE_X)
  7263. disable_x();
  7264. #endif
  7265. #if ENABLED(DISABLE_INACTIVE_Y)
  7266. disable_y();
  7267. #endif
  7268. #if ENABLED(DISABLE_INACTIVE_Z)
  7269. disable_z();
  7270. #endif
  7271. #if ENABLED(DISABLE_INACTIVE_E)
  7272. disable_e0();
  7273. disable_e1();
  7274. disable_e2();
  7275. disable_e3();
  7276. #endif
  7277. }
  7278. #ifdef CHDK // Check if pin should be set to LOW after M240 set it to HIGH
  7279. if (chdkActive && PENDING(ms, chdkHigh + CHDK_DELAY)) {
  7280. chdkActive = false;
  7281. WRITE(CHDK, LOW);
  7282. }
  7283. #endif
  7284. #if HAS_KILL
  7285. // Check if the kill button was pressed and wait just in case it was an accidental
  7286. // key kill key press
  7287. // -------------------------------------------------------------------------------
  7288. static int killCount = 0; // make the inactivity button a bit less responsive
  7289. const int KILL_DELAY = 750;
  7290. if (!READ(KILL_PIN))
  7291. killCount++;
  7292. else if (killCount > 0)
  7293. killCount--;
  7294. // Exceeded threshold and we can confirm that it was not accidental
  7295. // KILL the machine
  7296. // ----------------------------------------------------------------
  7297. if (killCount >= KILL_DELAY) kill(PSTR(MSG_KILLED));
  7298. #endif
  7299. #if HAS_HOME
  7300. // Check to see if we have to home, use poor man's debouncer
  7301. // ---------------------------------------------------------
  7302. static int homeDebounceCount = 0; // poor man's debouncing count
  7303. const int HOME_DEBOUNCE_DELAY = 2500;
  7304. if (!READ(HOME_PIN)) {
  7305. if (!homeDebounceCount) {
  7306. enqueue_and_echo_commands_P(PSTR("G28"));
  7307. LCD_MESSAGEPGM(MSG_AUTO_HOME);
  7308. }
  7309. if (homeDebounceCount < HOME_DEBOUNCE_DELAY)
  7310. homeDebounceCount++;
  7311. else
  7312. homeDebounceCount = 0;
  7313. }
  7314. #endif
  7315. #if HAS_CONTROLLERFAN
  7316. controllerFan(); // Check if fan should be turned on to cool stepper drivers down
  7317. #endif
  7318. #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
  7319. if (ELAPSED(ms, previous_cmd_ms + (EXTRUDER_RUNOUT_SECONDS) * 1000UL)
  7320. && thermalManager.degHotend(active_extruder) > EXTRUDER_RUNOUT_MINTEMP) {
  7321. #if ENABLED(SWITCHING_EXTRUDER)
  7322. bool oldstatus = E0_ENABLE_READ;
  7323. enable_e0();
  7324. #else // !SWITCHING_EXTRUDER
  7325. bool oldstatus;
  7326. switch (active_extruder) {
  7327. case 0:
  7328. oldstatus = E0_ENABLE_READ;
  7329. enable_e0();
  7330. break;
  7331. #if E_STEPPERS > 1
  7332. case 1:
  7333. oldstatus = E1_ENABLE_READ;
  7334. enable_e1();
  7335. break;
  7336. #if E_STEPPERS > 2
  7337. case 2:
  7338. oldstatus = E2_ENABLE_READ;
  7339. enable_e2();
  7340. break;
  7341. #if E_STEPPERS > 3
  7342. case 3:
  7343. oldstatus = E3_ENABLE_READ;
  7344. enable_e3();
  7345. break;
  7346. #endif
  7347. #endif
  7348. #endif
  7349. }
  7350. #endif // !SWITCHING_EXTRUDER
  7351. float oldepos = current_position[E_AXIS], oldedes = destination[E_AXIS];
  7352. planner.buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS],
  7353. destination[E_AXIS] + (EXTRUDER_RUNOUT_EXTRUDE) * (EXTRUDER_RUNOUT_ESTEPS) * planner.steps_to_mm[E_AXIS],
  7354. MMM_TO_MMS(EXTRUDER_RUNOUT_SPEED) * (EXTRUDER_RUNOUT_ESTEPS) * planner.steps_to_mm[E_AXIS], active_extruder);
  7355. current_position[E_AXIS] = oldepos;
  7356. destination[E_AXIS] = oldedes;
  7357. planner.set_e_position_mm(oldepos);
  7358. previous_cmd_ms = ms; // refresh_cmd_timeout()
  7359. stepper.synchronize();
  7360. #if ENABLED(SWITCHING_EXTRUDER)
  7361. E0_ENABLE_WRITE(oldstatus);
  7362. #else
  7363. switch (active_extruder) {
  7364. case 0:
  7365. E0_ENABLE_WRITE(oldstatus);
  7366. break;
  7367. #if E_STEPPERS > 1
  7368. case 1:
  7369. E1_ENABLE_WRITE(oldstatus);
  7370. break;
  7371. #if E_STEPPERS > 2
  7372. case 2:
  7373. E2_ENABLE_WRITE(oldstatus);
  7374. break;
  7375. #if E_STEPPERS > 3
  7376. case 3:
  7377. E3_ENABLE_WRITE(oldstatus);
  7378. break;
  7379. #endif
  7380. #endif
  7381. #endif
  7382. }
  7383. #endif // !SWITCHING_EXTRUDER
  7384. }
  7385. #endif // EXTRUDER_RUNOUT_PREVENT
  7386. #if ENABLED(DUAL_X_CARRIAGE)
  7387. // handle delayed move timeout
  7388. if (delayed_move_time && ELAPSED(ms, delayed_move_time + 1000UL) && IsRunning()) {
  7389. // travel moves have been received so enact them
  7390. delayed_move_time = 0xFFFFFFFFUL; // force moves to be done
  7391. set_destination_to_current();
  7392. prepare_move_to_destination();
  7393. }
  7394. #endif
  7395. #if ENABLED(TEMP_STAT_LEDS)
  7396. handle_status_leds();
  7397. #endif
  7398. planner.check_axes_activity();
  7399. }
  7400. void kill(const char* lcd_msg) {
  7401. SERIAL_ERROR_START;
  7402. SERIAL_ERRORLNPGM(MSG_ERR_KILLED);
  7403. #if ENABLED(ULTRA_LCD)
  7404. kill_screen(lcd_msg);
  7405. #else
  7406. UNUSED(lcd_msg);
  7407. #endif
  7408. delay(500); // Wait a short time
  7409. cli(); // Stop interrupts
  7410. thermalManager.disable_all_heaters();
  7411. disable_all_steppers();
  7412. #if HAS_POWER_SWITCH
  7413. pinMode(PS_ON_PIN, INPUT);
  7414. #endif
  7415. suicide();
  7416. while (1) {
  7417. #if ENABLED(USE_WATCHDOG)
  7418. watchdog_reset();
  7419. #endif
  7420. } // Wait for reset
  7421. }
  7422. #if ENABLED(FILAMENT_RUNOUT_SENSOR)
  7423. void handle_filament_runout() {
  7424. if (!filament_ran_out) {
  7425. filament_ran_out = true;
  7426. enqueue_and_echo_commands_P(PSTR(FILAMENT_RUNOUT_SCRIPT));
  7427. stepper.synchronize();
  7428. }
  7429. }
  7430. #endif // FILAMENT_RUNOUT_SENSOR
  7431. #if ENABLED(FAST_PWM_FAN)
  7432. void setPwmFrequency(uint8_t pin, int val) {
  7433. val &= 0x07;
  7434. switch (digitalPinToTimer(pin)) {
  7435. #if defined(TCCR0A)
  7436. case TIMER0A:
  7437. case TIMER0B:
  7438. // TCCR0B &= ~(_BV(CS00) | _BV(CS01) | _BV(CS02));
  7439. // TCCR0B |= val;
  7440. break;
  7441. #endif
  7442. #if defined(TCCR1A)
  7443. case TIMER1A:
  7444. case TIMER1B:
  7445. // TCCR1B &= ~(_BV(CS10) | _BV(CS11) | _BV(CS12));
  7446. // TCCR1B |= val;
  7447. break;
  7448. #endif
  7449. #if defined(TCCR2)
  7450. case TIMER2:
  7451. case TIMER2:
  7452. TCCR2 &= ~(_BV(CS10) | _BV(CS11) | _BV(CS12));
  7453. TCCR2 |= val;
  7454. break;
  7455. #endif
  7456. #if defined(TCCR2A)
  7457. case TIMER2A:
  7458. case TIMER2B:
  7459. TCCR2B &= ~(_BV(CS20) | _BV(CS21) | _BV(CS22));
  7460. TCCR2B |= val;
  7461. break;
  7462. #endif
  7463. #if defined(TCCR3A)
  7464. case TIMER3A:
  7465. case TIMER3B:
  7466. case TIMER3C:
  7467. TCCR3B &= ~(_BV(CS30) | _BV(CS31) | _BV(CS32));
  7468. TCCR3B |= val;
  7469. break;
  7470. #endif
  7471. #if defined(TCCR4A)
  7472. case TIMER4A:
  7473. case TIMER4B:
  7474. case TIMER4C:
  7475. TCCR4B &= ~(_BV(CS40) | _BV(CS41) | _BV(CS42));
  7476. TCCR4B |= val;
  7477. break;
  7478. #endif
  7479. #if defined(TCCR5A)
  7480. case TIMER5A:
  7481. case TIMER5B:
  7482. case TIMER5C:
  7483. TCCR5B &= ~(_BV(CS50) | _BV(CS51) | _BV(CS52));
  7484. TCCR5B |= val;
  7485. break;
  7486. #endif
  7487. }
  7488. }
  7489. #endif // FAST_PWM_FAN
  7490. void stop() {
  7491. thermalManager.disable_all_heaters();
  7492. if (IsRunning()) {
  7493. Running = false;
  7494. Stopped_gcode_LastN = gcode_LastN; // Save last g_code for restart
  7495. SERIAL_ERROR_START;
  7496. SERIAL_ERRORLNPGM(MSG_ERR_STOPPED);
  7497. LCD_MESSAGEPGM(MSG_STOPPED);
  7498. }
  7499. }
  7500. float calculate_volumetric_multiplier(float diameter) {
  7501. if (!volumetric_enabled || diameter == 0) return 1.0;
  7502. float d2 = diameter * 0.5;
  7503. return 1.0 / (M_PI * d2 * d2);
  7504. }
  7505. void calculate_volumetric_multipliers() {
  7506. for (uint8_t i = 0; i < COUNT(filament_size); i++)
  7507. volumetric_multiplier[i] = calculate_volumetric_multiplier(filament_size[i]);
  7508. }