1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
- #include "../../inc/MarlinConfigPre.h"
-
- #if ENABLED(MAGNETIC_PARKING_EXTRUDER)
-
- #include "../gcode.h"
- #include "../../module/tool_change.h"
- #include "../../module/motion.h"
-
- mpe_settings_t mpe_settings;
-
- inline void mpe_settings_report() {
- SERIAL_ECHO_MSG("Magnetic Parking Extruder");
- SERIAL_ECHO_MSG("L: Left parking :", mpe_settings.parking_xpos[0]);
- SERIAL_ECHO_MSG("R: Right parking :", mpe_settings.parking_xpos[1]);
- SERIAL_ECHO_MSG("I: Grab Offset :", mpe_settings.grab_distance);
- SERIAL_ECHO_MSG("J: Normal speed :", long(MMS_TO_MMM(mpe_settings.slow_feedrate)));
- SERIAL_ECHO_MSG("H: High speed :", long(MMS_TO_MMM(mpe_settings.fast_feedrate)));
- SERIAL_ECHO_MSG("D: Distance trav.:", mpe_settings.travel_distance);
- SERIAL_ECHO_MSG("C: Compenstion :", mpe_settings.compensation_factor);
- }
-
- void mpe_settings_init() {
- constexpr float pex[2] = PARKING_EXTRUDER_PARKING_X;
- mpe_settings.parking_xpos[0] = pex[0]; // M951 L
- mpe_settings.parking_xpos[1] = pex[1]; // M951 R
- mpe_settings.grab_distance = PARKING_EXTRUDER_GRAB_DISTANCE; // M951 I
- TERN_(HAS_HOME_OFFSET, set_home_offset(X_AXIS, mpe_settings.grab_distance * -1));
- mpe_settings.slow_feedrate = MMM_TO_MMS(MPE_SLOW_SPEED); // M951 J
- mpe_settings.fast_feedrate = MMM_TO_MMS(MPE_FAST_SPEED); // M951 H
- mpe_settings.travel_distance = MPE_TRAVEL_DISTANCE; // M951 D
- mpe_settings.compensation_factor = MPE_COMPENSATION; // M951 C
- mpe_settings_report();
- }
-
- void GcodeSuite::M951() {
- if (parser.seenval('L')) mpe_settings.parking_xpos[0] = parser.value_linear_units();
- if (parser.seenval('R')) mpe_settings.parking_xpos[1] = parser.value_linear_units();
- if (parser.seenval('I')) {
- mpe_settings.grab_distance = parser.value_linear_units();
- TERN_(HAS_HOME_OFFSET, set_home_offset(X_AXIS, mpe_settings.grab_distance * -1));
- }
- if (parser.seenval('J')) mpe_settings.slow_feedrate = MMM_TO_MMS(parser.value_linear_units());
- if (parser.seenval('H')) mpe_settings.fast_feedrate = MMM_TO_MMS(parser.value_linear_units());
- if (parser.seenval('D')) mpe_settings.travel_distance = parser.value_linear_units();
- if (parser.seenval('C')) mpe_settings.compensation_factor = parser.value_float();
- if (!parser.seen("CDHIJLR")) mpe_settings_report();
- }
-
- #endif // MAGNETIC_PARKING_EXTRUDER
|