123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Selena Compact pin assignments
- */
-
- #include "env_validate.h"
-
- #define BOARD_INFO_NAME "Selena Compact"
- #define BOARD_WEBSITE_URL "github.com/Ales2-k/Selena"
-
- //
- // Servos
- //
- #define SERVO0_PIN P1_23
-
- //
- // Limit Switches
- //
- #define X_MIN_PIN P1_28
- #define X_MAX_PIN P1_25
- #define Y_STOP_PIN P2_11
- #define Z_STOP_PIN P1_27
- #ifndef Z_MIN_PROBE_PIN
- #define Z_MIN_PROBE_PIN P1_22
- #endif
-
- //
- // Steppers
- //
- #define X_STEP_PIN P2_00
- #define X_DIR_PIN P0_05
- #define X_ENABLE_PIN P0_04
-
- #define Y_STEP_PIN P2_01
- #define Y_DIR_PIN P0_11
- #define Y_ENABLE_PIN P0_10
-
- #define Z_STEP_PIN P2_02
- #define Z_DIR_PIN P0_20
- #define Z_ENABLE_PIN P0_19
-
- #define E0_STEP_PIN P2_03
- #define E0_DIR_PIN P0_22
- #define E0_ENABLE_PIN P0_21
-
- #define E1_STEP_PIN P2_08
- #define E1_DIR_PIN P2_13
- #define E1_ENABLE_PIN P4_29
-
- //
- // Temperature Sensors
- // 3.3V max when defined as an analog input
- //
- #define TEMP_BED_PIN P0_23_A0 // A0 (TH1)
- #define TEMP_0_PIN P0_24_A1 // A1 (TH2)
- #define TEMP_1_PIN P0_25_A2 // A2 (TH3)
-
- //
- // Heaters / Fans
- //
-
- #define HEATER_BED_PIN P2_05
- #define HEATER_BED2_PIN P2_04
- #define HEATER_0_PIN P2_07
- #define HEATER_1_PIN P2_06
- #ifndef FAN_PIN
- #define FAN_PIN P1_24
- #endif
- #define FAN1_PIN P1_26
-
- //
- // Display
- //
-
- #if IS_RRD_FG_SC
- #define LCD_PINS_RS P0_16
- #define LCD_PINS_ENABLE P0_18
- #define LCD_PINS_D4 P0_15
- #define LCD_PINS_D5 P1_00
- #define LCD_PINS_D6 P1_01
- #define LCD_PINS_D7 P1_04
- #define BEEPER_PIN P1_31
-
- #define BTN_EN1 P3_25
- #define BTN_EN2 P3_26
- #define BTN_ENC P1_30
-
- #define SD_DETECT_PIN -1
-
- #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
- #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
- #endif
-
- #endif // IS_RRD_FG_SC
|