123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- #include "env_validate.h"
-
- #if HOTENDS > 3 || E_STEPPERS > 3
- #error "FYSETC S6 supports up to 3 hotends / E steppers."
- #endif
-
- #ifndef BOARD_INFO_NAME
- #define BOARD_INFO_NAME "FYSETC S6"
- #endif
- #ifndef DEFAULT_MACHINE_NAME
- #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
- #endif
-
- // Avoid conflict with TIMER_TONE defined in variant
- #define STEP_TIMER 10
-
- //
- // EEPROM Emulation
- //
- #if NO_EEPROM_SELECTED
- #define FLASH_EEPROM_EMULATION
- //#define I2C_EEPROM
- #endif
-
- #if ENABLED(FLASH_EEPROM_EMULATION)
- // Decrease delays and flash wear by spreading writes across the
- // 128 kB sector allocated for EEPROM emulation.
- #define FLASH_EEPROM_LEVELING
- #elif ENABLED(I2C_EEPROM)
- #define MARLIN_EEPROM_SIZE 0x1000 // 4K
- #endif
-
- //
- // Servos
- //
- #ifndef SERVO0_PIN
- #define SERVO0_PIN PA3
- #endif
-
- //
- // Limit Switches
- //
- #define X_MIN_PIN PB14
- #define X_MAX_PIN PA1
- #define Y_MIN_PIN PB13
- #define Y_MAX_PIN PA2
- #define Z_MIN_PIN PA0
- #define Z_MAX_PIN PA3
-
- //
- // Filament Sensor
- // share with X_MAX_PIN
- //
- #ifndef FIL_RUNOUT_PIN
- #define FIL_RUNOUT_PIN PA1
- #endif
-
- //
- // Steppers
- //
- #define X_STEP_PIN PE11
- #define X_DIR_PIN PE10
- #ifndef X_ENABLE_PIN
- #define X_ENABLE_PIN PE12
- #endif
- #define X_CS_PIN PE7
-
- #define Y_STEP_PIN PD8
- #define Y_DIR_PIN PB12
- #define Y_ENABLE_PIN PD9
- #define Y_CS_PIN PE15
-
- #define Z_STEP_PIN PD14
- #define Z_DIR_PIN PD13
- #define Z_ENABLE_PIN PD15
- #define Z_CS_PIN PD10
-
- #define E0_STEP_PIN PD5
- #define E0_DIR_PIN PD6
- #define E0_ENABLE_PIN PD4
- #define E0_CS_PIN PD7
-
- #define E1_STEP_PIN PE6
- #define E1_DIR_PIN PC13
- #define E1_ENABLE_PIN PE5
- #define E1_CS_PIN PC14
-
- #define E2_STEP_PIN PE2
- #define E2_DIR_PIN PE4
- #define E2_ENABLE_PIN PE3
- #define E2_CS_PIN PC15
-
- #if HAS_TMC_UART
- //
- // TMC2208/TMC2209 stepper drivers
- //
-
- #ifndef X_SERIAL_TX_PIN
- #define X_SERIAL_TX_PIN PE9
- #endif
- #ifndef X_SERIAL_RX_PIN
- #define X_SERIAL_RX_PIN PE8
- #endif
- #ifndef Y_SERIAL_TX_PIN
- #define Y_SERIAL_TX_PIN PE14
- #endif
- #ifndef Y_SERIAL_RX_PIN
- #define Y_SERIAL_RX_PIN PE13
- #endif
- #ifndef Z_SERIAL_TX_PIN
- #define Z_SERIAL_TX_PIN PD11
- #endif
- #ifndef Z_SERIAL_RX_PIN
- #define Z_SERIAL_RX_PIN PD12
- #endif
- #ifndef E0_SERIAL_TX_PIN
- #define E0_SERIAL_TX_PIN PD3
- #endif
- #ifndef E0_SERIAL_RX_PIN
- #define E0_SERIAL_RX_PIN PA15
- #endif
- #ifndef E1_SERIAL_TX_PIN
- #define E1_SERIAL_TX_PIN PC4
- #endif
- #ifndef E1_SERIAL_RX_PIN
- #define E1_SERIAL_RX_PIN PC5
- #endif
- #ifndef E2_SERIAL_TX_PIN
- #define E2_SERIAL_TX_PIN PE1
- #endif
- #ifndef E2_SERIAL_RX_PIN
- #define E2_SERIAL_RX_PIN PE0
- #endif
- #endif
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN PC0
- #define TEMP_1_PIN PC1
- #define TEMP_2_PIN PC2
- #ifndef TEMP_BED_PIN
- #define TEMP_BED_PIN PC3
- #endif
-
- //
- // Heaters / Fans
- //
- #ifndef HEATER_0_PIN
- #define HEATER_0_PIN PB3
- #endif
- #ifndef HEATER_1_PIN
- #define HEATER_1_PIN PB4
- #endif
- #ifndef HEATER_2_PIN
- #define HEATER_2_PIN PB15
- #endif
- #ifndef HEATER_BED_PIN
- #define HEATER_BED_PIN PC8
- #endif
-
- #ifndef FAN_PIN
- #define FAN_PIN PB0
- #endif
- #ifndef FAN1_PIN
- #define FAN1_PIN PB1
- #endif
- #define FAN2_PIN PB2
-
- //
- // Misc. Functions
- //
- //#define LED_PIN PB14
- //#define PS_ON_PIN PE11
- //#define KILL_PIN PC5
-
- /**
- * ------ ------
- * PC9 |10 9 | PA8 PA6 |10 9 | PA5
- * PC11 | 8 7 | PD2 PC6 | 8 7 | PA4
- * PC10 6 5 | PC12 PC7 6 5 | PA7
- * PD0 | 4 3 | PD1 PB10 | 4 3 | RESET
- * GND | 2 1 | 5V GND | 2 1 | 5V
- * ------ ------
- * EXP1 EXP2
- */
- #define EXP1_03_PIN PD1
- #define EXP1_04_PIN PD0
- #define EXP1_05_PIN PC12
- #define EXP1_06_PIN PC10
- #define EXP1_07_PIN PD2
- #define EXP1_08_PIN PC11
- #define EXP1_09_PIN PA8
- #define EXP1_10_PIN PC9
-
- #define EXP2_03_PIN -1 // RESET
- #define EXP2_04_PIN PB10
- #define EXP2_05_PIN PA7
- #define EXP2_06_PIN PC7
- #define EXP2_07_PIN PA4
- #define EXP2_08_PIN PC6
- #define EXP2_09_PIN PA5
- #define EXP2_10_PIN PA6
-
- //
- // SPI / SD Card
- //
- #define SD_SCK_PIN EXP2_09_PIN
- #define SD_MISO_PIN EXP2_10_PIN
- #define SD_MOSI_PIN EXP2_05_PIN
-
- #define SDSS EXP2_07_PIN
- #define SD_DETECT_PIN EXP2_04_PIN
-
- //
- // LCD / Controller
- //
- #if ENABLED(FYSETC_242_OLED_12864)
-
- #define BTN_EN1 EXP1_10_PIN
- #define BTN_EN2 EXP1_03_PIN
- #define BTN_ENC EXP1_09_PIN
-
- #define BEEPER_PIN EXP2_08_PIN
-
- #define LCD_PINS_DC EXP1_05_PIN
- #define LCD_PINS_RS EXP2_06_PIN // LCD_RST
- #define DOGLCD_CS EXP1_07_PIN
- #define DOGLCD_MOSI EXP1_06_PIN
- #define DOGLCD_SCK EXP1_08_PIN
- #define DOGLCD_A0 LCD_PINS_DC
- #define FORCE_SOFT_SPI
-
- #define KILL_PIN -1 // NC
- #define NEOPIXEL_PIN EXP1_04_PIN
-
- #elif HAS_WIRED_LCD
-
- #define BEEPER_PIN EXP1_10_PIN
- #define BTN_ENC EXP1_09_PIN
-
- #if ENABLED(CR10_STOCKDISPLAY)
- #define LCD_PINS_RS EXP1_04_PIN
-
- #define BTN_EN1 EXP1_08_PIN
- #define BTN_EN2 EXP1_06_PIN
-
- #define LCD_PINS_ENABLE EXP1_03_PIN
- #define LCD_PINS_D4 EXP1_05_PIN
-
- #else
-
- #define LCD_PINS_RS EXP1_07_PIN
-
- #define BTN_EN1 EXP2_08_PIN
- #define BTN_EN2 EXP2_06_PIN
-
- #define LCD_SDSS EXP2_07_PIN
-
- #define LCD_PINS_ENABLE EXP1_08_PIN
- #define LCD_PINS_D4 EXP1_06_PIN
-
- #if ENABLED(FYSETC_MINI_12864)
- // See https://wiki.fysetc.com/Mini12864_Panel
- #define DOGLCD_CS EXP1_08_PIN
- #define DOGLCD_A0 EXP1_07_PIN
- #if ENABLED(FYSETC_GENERIC_12864_1_1)
- #define LCD_BACKLIGHT_PIN EXP1_04_PIN
- #endif
- #define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally.
- #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
- #ifndef RGB_LED_R_PIN
- #define RGB_LED_R_PIN EXP1_05_PIN
- #endif
- #ifndef RGB_LED_G_PIN
- #define RGB_LED_G_PIN EXP1_04_PIN
- #endif
- #ifndef RGB_LED_B_PIN
- #define RGB_LED_B_PIN EXP1_03_PIN
- #endif
- #elif ENABLED(FYSETC_MINI_12864_2_1)
- #define NEOPIXEL_PIN EXP1_05_PIN
- #endif
- #endif
-
- #if IS_ULTIPANEL
- #define LCD_PINS_D5 EXP1_05_PIN
- #define LCD_PINS_D6 EXP1_04_PIN
- #define LCD_PINS_D7 EXP1_03_PIN
- #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
- #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
- #endif
- #endif
-
- #endif
-
- #endif // HAS_WIRED_LCD
-
- // Alter timing for graphical display
- #if IS_U8GLIB_ST7920
- #define BOARD_ST7920_DELAY_1 96
- #define BOARD_ST7920_DELAY_2 48
- #define BOARD_ST7920_DELAY_3 640
- #endif
-
- #ifndef RGB_LED_R_PIN
- #define RGB_LED_R_PIN PB6
- #endif
- #ifndef RGB_LED_G_PIN
- #define RGB_LED_G_PIN PB5
- #endif
- #ifndef RGB_LED_B_PIN
- #define RGB_LED_B_PIN PB7
- #endif
- #ifndef RGB_LED_W_PIN
- #define RGB_LED_W_PIN -1
- #endif
|