1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Pin assignments for the RUMBA32
- *
- * https://aus3d.com.au/rumba32
- * https://github.com/Aus3D/RUMBA32
- */
-
- #define BOARD_INFO_NAME "RUMBA32"
-
- #if NO_EEPROM_SELECTED
- #if MB(RUMBA32_V1_0)
- #define FLASH_EEPROM_EMULATION
- #define MARLIN_EEPROM_SIZE 0x1000 // 4K
- #elif MB(RUMBA32_V1_1)
- #define I2C_EEPROM
- #define MARLIN_EEPROM_SIZE 0x2000 // 8K (24LC64T-I/OT)
- #endif
- #endif
-
- #if ENABLED(FLASH_EEPROM_EMULATION)
- // Decrease delays and flash wear by spreading writes across the
- // 128 kB sector allocated for EEPROM emulation.
- #define FLASH_EEPROM_LEVELING
- #endif
-
- #include "pins_RUMBA32_common.h"
-
- #if MB(RUMBA32_V1_1)
-
- #define SERVO0_PIN PA15
-
- #if HAS_TMC_UART
- //
- // TMC2208/TMC2209 stepper drivers - Software Serial is used according to below pins
- //
- #define X_SERIAL_TX_PIN PA14
- #define X_SERIAL_RX_PIN PC14
-
- #define Y_SERIAL_TX_PIN PA13
- #define Y_SERIAL_RX_PIN PE4
-
- #define Z_SERIAL_TX_PIN PB10
- #define Z_SERIAL_RX_PIN PE0
-
- #define E0_SERIAL_TX_PIN PD11
- #define E0_SERIAL_RX_PIN PC13
-
- #define E1_SERIAL_TX_PIN PB3
- #define E1_SERIAL_RX_PIN PD5
-
- #define E2_SERIAL_TX_PIN PB4
- #define E2_SERIAL_RX_PIN PD1
- #endif
- #endif
|