My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Você não pode selecionar mais de 25 tópicos Os tópicos devem começar com uma letra ou um número, podem incluir traços ('-') e podem ter até 35 caracteres.

SanityCheck.h 36KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * SanityCheck.h
  24. *
  25. * Test configuration values for errors at compile-time.
  26. */
  27. /**
  28. * Due to the high number of issues related with old versions of Arduino IDE
  29. * we now prevent Marlin from compiling with older toolkits.
  30. */
  31. #if !defined(ARDUINO) || ARDUINO < 10608
  32. #error "Versions of Arduino IDE prior to 1.6.8 are no longer supported, please update your toolkit."
  33. #endif
  34. /**
  35. * We try our best to include sanity checks for all the changes configuration
  36. * directives because people have a tendency to use outdated config files with
  37. * the bleding edge source code, but sometimes this is not enough. This check
  38. * will force a minimum config file revision, otherwise Marlin will not build.
  39. */
  40. #if ! defined(CONFIGURATION_H_VERSION) || CONFIGURATION_H_VERSION < REQUIRED_CONFIGURATION_H_VERSION
  41. #error "You are using an old Configuration.h file, update it before building Marlin."
  42. #endif
  43. #if ! defined(CONFIGURATION_ADV_H_VERSION) || CONFIGURATION_ADV_H_VERSION < REQUIRED_CONFIGURATION_ADV_H_VERSION
  44. #error "You are using an old Configuration_adv.h file, update it before building Marlin."
  45. #endif
  46. /**
  47. * Warnings for old configurations
  48. */
  49. #if WATCH_TEMP_PERIOD > 500
  50. #error "WATCH_TEMP_PERIOD now uses seconds instead of milliseconds."
  51. #elif DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD))
  52. #error "Thermal Runaway Protection for hotends is now enabled with THERMAL_PROTECTION_HOTENDS."
  53. #elif DISABLED(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD)
  54. #error "Thermal Runaway Protection for the bed is now enabled with THERMAL_PROTECTION_BED."
  55. #elif ENABLED(COREXZ) && ENABLED(Z_LATE_ENABLE)
  56. #error "Z_LATE_ENABLE can't be used with COREXZ."
  57. #elif defined(X_HOME_RETRACT_MM)
  58. #error "[XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM."
  59. #elif defined(SDCARDDETECTINVERTED)
  60. #error "SDCARDDETECTINVERTED is now SD_DETECT_INVERTED. Please update your configuration."
  61. #elif defined(BTENABLED)
  62. #error "BTENABLED is now BLUETOOTH. Please update your configuration."
  63. #elif defined(CUSTOM_MENDEL_NAME)
  64. #error "CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME. Please update your configuration."
  65. #elif defined(HAS_AUTOMATIC_VERSIONING)
  66. #error "HAS_AUTOMATIC_VERSIONING is now USE_AUTOMATIC_VERSIONING. Please update your configuration."
  67. #elif defined(SDSLOW)
  68. #error "SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead."
  69. #elif defined(SDEXTRASLOW)
  70. #error "SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead."
  71. #elif defined(FILAMENT_SENSOR)
  72. #error "FILAMENT_SENSOR is deprecated. Use FILAMENT_WIDTH_SENSOR instead."
  73. #elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS)
  74. #error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead."
  75. #elif ENABLED(Z_DUAL_ENDSTOPS) && !defined(Z2_USE_ENDSTOP)
  76. #error "Z_DUAL_ENDSTOPS settings are simplified. Just set Z2_USE_ENDSTOP to the endstop you want to repurpose for Z2"
  77. #elif defined(LANGUAGE_INCLUDE)
  78. #error "LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE. Please update your configuration."
  79. #elif defined(EXTRUDER_OFFSET_X) || defined(EXTRUDER_OFFSET_Y)
  80. #error "EXTRUDER_OFFSET_[XY] is deprecated. Use HOTEND_OFFSET_[XY] instead."
  81. #elif defined(PID_PARAMS_PER_EXTRUDER)
  82. #error "PID_PARAMS_PER_EXTRUDER is deprecated. Use PID_PARAMS_PER_HOTEND instead."
  83. #elif defined(EXTRUDER_WATTS) || defined(BED_WATTS)
  84. #error "EXTRUDER_WATTS and BED_WATTS are deprecated. Remove them from your configuration."
  85. #elif defined(SERVO_ENDSTOP_ANGLES)
  86. #error "SERVO_ENDSTOP_ANGLES is deprecated. Use Z_SERVO_ANGLES instead."
  87. #elif defined(X_ENDSTOP_SERVO_NR) || defined(Y_ENDSTOP_SERVO_NR)
  88. #error "X_ENDSTOP_SERVO_NR and Y_ENDSTOP_SERVO_NR are deprecated and should be removed."
  89. #elif defined(DEFAULT_XYJERK)
  90. #error "DEFAULT_XYJERK is deprecated. Use DEFAULT_XJERK and DEFAULT_YJERK instead."
  91. #elif defined(XY_TRAVEL_SPEED)
  92. #error "XY_TRAVEL_SPEED is deprecated. Use XY_PROBE_SPEED instead."
  93. #elif defined(PROBE_SERVO_DEACTIVATION_DELAY)
  94. #error "PROBE_SERVO_DEACTIVATION_DELAY is deprecated. Use DEACTIVATE_SERVOS_AFTER_MOVE instead."
  95. #elif defined(SERVO_DEACTIVATION_DELAY)
  96. #error "SERVO_DEACTIVATION_DELAY is deprecated. Use SERVO_DELAY instead."
  97. #elif ENABLED(FILAMENTCHANGEENABLE)
  98. #error "FILAMENTCHANGEENABLE is now FILAMENT_CHANGE_FEATURE. Please update your configuration."
  99. #elif defined(PLA_PREHEAT_HOTEND_TEMP)
  100. #error "PLA_PREHEAT_HOTEND_TEMP is now PREHEAT_1_TEMP_HOTEND. Please update your configuration."
  101. #elif defined(PLA_PREHEAT_HPB_TEMP)
  102. #error "PLA_PREHEAT_HPB_TEMP is now PREHEAT_1_TEMP_BED. Please update your configuration."
  103. #elif defined(PLA_PREHEAT_FAN_SPEED)
  104. #error "PLA_PREHEAT_FAN_SPEED is now PREHEAT_1_FAN_SPEED. Please update your configuration."
  105. #elif defined(ABS_PREHEAT_HOTEND_TEMP)
  106. #error "ABS_PREHEAT_HOTEND_TEMP is now PREHEAT_2_TEMP_HOTEND. Please update your configuration."
  107. #elif defined(ABS_PREHEAT_HPB_TEMP)
  108. #error "ABS_PREHEAT_HPB_TEMP is now PREHEAT_2_TEMP_BED. Please update your configuration."
  109. #elif defined(ABS_PREHEAT_FAN_SPEED)
  110. #error "ABS_PREHEAT_FAN_SPEED is now PREHEAT_2_FAN_SPEED. Please update your configuration."
  111. #elif defined(ENDSTOPS_ONLY_FOR_HOMING)
  112. #error "ENDSTOPS_ONLY_FOR_HOMING is deprecated. Use (disable) ENDSTOPS_ALWAYS_ON_DEFAULT instead."
  113. #elif defined(HOMING_FEEDRATE)
  114. #error "HOMING_FEEDRATE is deprecated. Set individual rates with HOMING_FEEDRATE_(XY|Z|E) instead."
  115. #elif defined(MANUAL_HOME_POSITIONS)
  116. #error "MANUAL_HOME_POSITIONS is deprecated. Set MANUAL_[XYZ]_HOME_POS as-needed instead."
  117. #elif defined(PID_ADD_EXTRUSION_RATE)
  118. #error "PID_ADD_EXTRUSION_RATE is now PID_EXTRUSION_SCALING and is DISABLED by default. Are you sure you want to use this option? Please update your configuration."
  119. #elif defined(Z_RAISE_BEFORE_HOMING)
  120. #error "Z_RAISE_BEFORE_HOMING is now Z_HOMING_HEIGHT. Please update your configuration."
  121. #elif defined(MIN_Z_HEIGHT_FOR_HOMING)
  122. #error "MIN_Z_HEIGHT_FOR_HOMING is now Z_HOMING_HEIGHT. Please update your configuration."
  123. #elif defined(Z_RAISE_BEFORE_PROBING) || defined(Z_RAISE_AFTER_PROBING)
  124. #error "Z_RAISE_(BEFORE|AFTER)_PROBING are deprecated. Use Z_CLEARANCE_DEPLOY_PROBE instead."
  125. #elif defined(Z_RAISE_PROBE_DEPLOY_STOW) || defined(Z_RAISE_BETWEEN_PROBINGS)
  126. #error "Z_RAISE_PROBE_DEPLOY_STOW and Z_RAISE_BETWEEN_PROBINGS are now Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES. Please update your configuration."
  127. #elif defined(Z_PROBE_DEPLOY_HEIGHT) || defined(Z_PROBE_TRAVEL_HEIGHT)
  128. #error "Z_PROBE_DEPLOY_HEIGHT and Z_PROBE_TRAVEL_HEIGHT are now Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES. Please update your configuration."
  129. #elif !defined(MIN_STEPS_PER_SEGMENT)
  130. #error Please replace "const int dropsegments" with "#define MIN_STEPS_PER_SEGMENT" (and increase by 1) in Configuration_adv.h.
  131. #elif defined(PREVENT_DANGEROUS_EXTRUDE)
  132. #error "PREVENT_DANGEROUS_EXTRUDE is now PREVENT_COLD_EXTRUSION. Please update your configuration."
  133. #elif defined(SCARA)
  134. #error "SCARA is now MORGAN_SCARA. Please update your configuration."
  135. #elif defined(ENABLE_AUTO_BED_LEVELING)
  136. #error "ENABLE_AUTO_BED_LEVELING is deprecated. Specify AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_3POINT."
  137. #elif defined(AUTO_BED_LEVELING_FEATURE)
  138. #error "AUTO_BED_LEVELING_FEATURE is deprecated. Specify AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_3POINT."
  139. #elif defined(ABL_GRID_POINTS)
  140. #error "ABL_GRID_POINTS is now ABL_GRID_POINTS_X and ABL_GRID_POINTS_Y. Please update your configuration."
  141. #elif defined(BEEPER)
  142. #error "BEEPER is now BEEPER_PIN. Please update your pins definitions."
  143. #elif defined(SDCARDDETECT)
  144. #error "SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions."
  145. #elif defined(STAT_LED_RED) || defined(STAT_LED_BLUE)
  146. #error "STAT_LED_RED/STAT_LED_BLUE are now STAT_LED_RED_PIN/STAT_LED_BLUE_PIN. Please update your pins definitions."
  147. #elif defined(LCD_PIN_BL)
  148. #error "LCD_PIN_BL is now LCD_BACKLIGHT_PIN. Please update your pins definitions."
  149. #elif defined(LCD_PIN_RESET)
  150. #error "LCD_PIN_RESET is now LCD_RESET_PIN. Please update your pins definitions."
  151. #elif defined(EXTRUDER_0_AUTO_FAN_PIN) || defined(EXTRUDER_1_AUTO_FAN_PIN) || defined(EXTRUDER_2_AUTO_FAN_PIN) || defined(EXTRUDER_3_AUTO_FAN_PIN)
  152. #error "EXTRUDER_[0123]_AUTO_FAN_PIN is now E[0123]_AUTO_FAN_PIN. Please update your Configuration_adv.h."
  153. #endif
  154. /**
  155. * Marlin release, version and default string
  156. */
  157. #ifndef SHORT_BUILD_VERSION
  158. #error "SHORT_BUILD_VERSION must be specified."
  159. #elif !defined(DETAILED_BUILD_VERSION)
  160. #error "BUILD_VERSION must be specified."
  161. #elif !defined(STRING_DISTRIBUTION_DATE)
  162. #error "STRING_DISTRIBUTION_DATE must be specified."
  163. #elif !defined(PROTOCOL_VERSION)
  164. #error "PROTOCOL_VERSION must be specified."
  165. #elif !defined(MACHINE_NAME)
  166. #error "MACHINE_NAME must be specified."
  167. #elif !defined(SOURCE_CODE_URL)
  168. #error "SOURCE_CODE_URL must be specified."
  169. #elif !defined(DEFAULT_MACHINE_UUID)
  170. #error "DEFAULT_MACHINE_UUID must be specified."
  171. #elif !defined(WEBSITE_URL)
  172. #error "WEBSITE_URL must be specified."
  173. #endif
  174. /**
  175. * Dual Stepper Drivers
  176. */
  177. #if ENABLED(X_DUAL_STEPPER_DRIVERS) && ENABLED(DUAL_X_CARRIAGE)
  178. #error "DUAL_X_CARRIAGE is not compatible with X_DUAL_STEPPER_DRIVERS."
  179. #elif ENABLED(X_DUAL_STEPPER_DRIVERS) && (!HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR)
  180. #error "X_DUAL_STEPPER_DRIVERS requires X2 pins (and an extra E plug)."
  181. #elif ENABLED(Y_DUAL_STEPPER_DRIVERS) && (!HAS_Y2_ENABLE || !HAS_Y2_STEP || !HAS_Y2_DIR)
  182. #error "Y_DUAL_STEPPER_DRIVERS requires Y2 pins (and an extra E plug)."
  183. #elif ENABLED(Z_DUAL_STEPPER_DRIVERS) && (!HAS_Z2_ENABLE || !HAS_Z2_STEP || !HAS_Z2_DIR)
  184. #error "Z_DUAL_STEPPER_DRIVERS requires Z2 pins (and an extra E plug)."
  185. #endif
  186. /**
  187. * Progress Bar
  188. */
  189. #if ENABLED(LCD_PROGRESS_BAR)
  190. #if DISABLED(SDSUPPORT)
  191. #error "LCD_PROGRESS_BAR requires SDSUPPORT."
  192. #elif ENABLED(DOGLCD)
  193. #error "LCD_PROGRESS_BAR does not apply to graphical displays."
  194. #elif ENABLED(FILAMENT_LCD_DISPLAY)
  195. #error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both."
  196. #endif
  197. #endif
  198. /**
  199. * Delta requirements
  200. */
  201. #if ENABLED(DELTA)
  202. #if DISABLED(USE_XMAX_PLUG) && DISABLED(USE_YMAX_PLUG) && DISABLED(USE_ZMAX_PLUG)
  203. #error "You probably want to use Max Endstops for DELTA!"
  204. #endif
  205. #if ABL_GRID
  206. #if (ABL_GRID_POINTS_X & 1) == 0 || (ABL_GRID_POINTS_Y & 1) == 0
  207. #error "DELTA requires ABL_GRID_POINTS_X and ABL_GRID_POINTS_Y to be odd numbers."
  208. #elif ABL_GRID_POINTS_X < 3
  209. #error "DELTA requires ABL_GRID_POINTS_X and ABL_GRID_POINTS_Y to be 3 or higher."
  210. #endif
  211. #endif
  212. #endif
  213. /**
  214. * Babystepping
  215. */
  216. #if ENABLED(BABYSTEPPING)
  217. #if DISABLED(ULTRA_LCD)
  218. #error "BABYSTEPPING requires an LCD controller."
  219. #endif
  220. #if ENABLED(SCARA)
  221. #error "BABYSTEPPING is not implemented for SCARA yet."
  222. #endif
  223. #if ENABLED(DELTA) && ENABLED(BABYSTEP_XY)
  224. #error "BABYSTEPPING only implemented for Z axis on deltabots."
  225. #endif
  226. #endif
  227. /**
  228. * Filament Runout needs a pin and either SD Support or Auto print start detection
  229. */
  230. #if ENABLED(FILAMENT_RUNOUT_SENSOR)
  231. #if !HAS_FIL_RUNOUT
  232. #error "FILAMENT_RUNOUT_SENSOR requires FIL_RUNOUT_PIN."
  233. #elif DISABLED(SDSUPPORT) && DISABLED(PRINTJOB_TIMER_AUTOSTART)
  234. #error "FILAMENT_RUNOUT_SENSOR requires SDSUPPORT or PRINTJOB_TIMER_AUTOSTART."
  235. #endif
  236. #endif
  237. /**
  238. * Filament Change with Extruder Runout Prevention
  239. */
  240. #if ENABLED(FILAMENT_CHANGE_FEATURE) && ENABLED(EXTRUDER_RUNOUT_PREVENT)
  241. #error "EXTRUDER_RUNOUT_PREVENT is incompatible with FILAMENT_CHANGE_FEATURE."
  242. #endif
  243. /**
  244. * Individual axis homing is useless for DELTAS
  245. */
  246. #if ENABLED(INDIVIDUAL_AXIS_HOMING_MENU) && ENABLED(DELTA)
  247. #error "INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics."
  248. #endif
  249. /**
  250. * Options only for EXTRUDERS > 1
  251. */
  252. #if EXTRUDERS > 1
  253. #if EXTRUDERS > 4
  254. #error "The maximum number of EXTRUDERS in Marlin is 4."
  255. #endif
  256. #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
  257. #error "EXTRUDERS must be 1 with TEMP_SENSOR_1_AS_REDUNDANT."
  258. #endif
  259. #if ENABLED(HEATERS_PARALLEL)
  260. #error "EXTRUDERS must be 1 with HEATERS_PARALLEL."
  261. #endif
  262. #elif ENABLED(SINGLENOZZLE)
  263. #error "SINGLENOZZLE requires 2 or more EXTRUDERS."
  264. #endif
  265. /**
  266. * Only one type of extruder allowed
  267. */
  268. #if (ENABLED(SWITCHING_EXTRUDER) && (ENABLED(SINGLENOZZLE) || ENABLED(MIXING_EXTRUDER))) \
  269. || (ENABLED(SINGLENOZZLE) && ENABLED(MIXING_EXTRUDER))
  270. #error "Please define only one type of extruder: SINGLENOZZLE, SWITCHING_EXTRUDER, or MIXING_EXTRUDER."
  271. #endif
  272. /**
  273. * Single Stepper Dual Extruder with switching servo
  274. */
  275. #if ENABLED(SWITCHING_EXTRUDER)
  276. #if ENABLED(DUAL_X_CARRIAGE)
  277. #error "SWITCHING_EXTRUDER and DUAL_X_CARRIAGE are incompatible."
  278. #elif EXTRUDERS != 2
  279. #error "SWITCHING_EXTRUDER requires exactly 2 EXTRUDERS."
  280. #elif NUM_SERVOS < 1
  281. #error "SWITCHING_EXTRUDER requires NUM_SERVOS >= 1."
  282. #endif
  283. #endif
  284. /**
  285. * Mixing Extruder requirements
  286. */
  287. #if ENABLED(MIXING_EXTRUDER)
  288. #if EXTRUDERS > 1
  289. #error "MIXING_EXTRUDER currently only supports one extruder."
  290. #endif
  291. #if MIXING_STEPPERS < 2
  292. #error "You must set MIXING_STEPPERS >= 2 for a mixing extruder."
  293. #endif
  294. #if ENABLED(FILAMENT_SENSOR)
  295. #error "MIXING_EXTRUDER is incompatible with FILAMENT_SENSOR. Comment out this line to use it anyway."
  296. #endif
  297. #endif
  298. /**
  299. * Limited number of servos
  300. */
  301. #if NUM_SERVOS > 4
  302. #error "The maximum number of SERVOS in Marlin is 4."
  303. #endif
  304. /**
  305. * Servo deactivation depends on servo endstops
  306. */
  307. #if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) && !HAS_Z_SERVO_ENDSTOP
  308. #error "Z_ENDSTOP_SERVO_NR is required for DEACTIVATE_SERVOS_AFTER_MOVE."
  309. #endif
  310. /**
  311. * Required LCD language
  312. */
  313. #if DISABLED(DOGLCD) && ENABLED(ULTRA_LCD) && !defined(DISPLAY_CHARSET_HD44780)
  314. #error "You must set DISPLAY_CHARSET_HD44780 to JAPANESE, WESTERN or CYRILLIC for your LCD controller."
  315. #endif
  316. /**
  317. * Bed Heating Options - PID vs Limit Switching
  318. */
  319. #if ENABLED(PIDTEMPBED) && ENABLED(BED_LIMIT_SWITCHING)
  320. #error "To use BED_LIMIT_SWITCHING you must disable PIDTEMPBED."
  321. #endif
  322. /**
  323. * Allow only one bed leveling option to be defined
  324. */
  325. #if HAS_ABL
  326. #define COUNT_LEV_1 0
  327. #if ENABLED(AUTO_BED_LEVELING_LINEAR)
  328. #define COUNT_LEV_2 INCREMENT(COUNT_LEV_1)
  329. #else
  330. #define COUNT_LEV_2 COUNT_LEV_1
  331. #endif
  332. #if ENABLED(AUTO_BED_LEVELING_3POINT)
  333. #define COUNT_LEV_3 INCREMENT(COUNT_LEV_2)
  334. #else
  335. #define COUNT_LEV_3 COUNT_LEV_2
  336. #endif
  337. #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
  338. #define COUNT_LEV_4 INCREMENT(COUNT_LEV_3)
  339. #else
  340. #define COUNT_LEV_4 COUNT_LEV_3
  341. #endif
  342. #if ENABLED(MESH_BED_LEVELING)
  343. #define COUNT_LEV_5 INCREMENT(COUNT_LEV_4)
  344. #else
  345. #define COUNT_LEV_5 COUNT_LEV_4
  346. #endif
  347. #if COUNT_LEV_5 > 1
  348. #error "Select only one of: MESH_BED_LEVELING, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT, or AUTO_BED_LEVELING_BILINEAR."
  349. #endif
  350. #endif
  351. /**
  352. * Mesh Bed Leveling
  353. */
  354. #if ENABLED(MESH_BED_LEVELING)
  355. #if ENABLED(DELTA)
  356. #error "MESH_BED_LEVELING does not yet support DELTA printers."
  357. #elif MESH_NUM_X_POINTS > 9 || MESH_NUM_Y_POINTS > 9
  358. #error "MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS must be less than 10."
  359. #endif
  360. #elif ENABLED(MANUAL_BED_LEVELING)
  361. #error "MANUAL_BED_LEVELING only applies to MESH_BED_LEVELING."
  362. #endif
  363. /**
  364. * Probes
  365. */
  366. #if PROBE_SELECTED
  367. /**
  368. * Allow only one probe option to be defined
  369. */
  370. #define COUNT_PROBE_1 0
  371. #if ENABLED(FIX_MOUNTED_PROBE)
  372. #define COUNT_PROBE_2 INCREMENT(COUNT_PROBE_1)
  373. #else
  374. #define COUNT_PROBE_2 COUNT_PROBE_1
  375. #endif
  376. #if HAS_Z_SERVO_ENDSTOP && DISABLED(BLTOUCH)
  377. #define COUNT_PROBE_3 INCREMENT(COUNT_PROBE_2)
  378. #else
  379. #define COUNT_PROBE_3 COUNT_PROBE_2
  380. #endif
  381. #if ENABLED(BLTOUCH)
  382. #define COUNT_PROBE_4 INCREMENT(COUNT_PROBE_3)
  383. #else
  384. #define COUNT_PROBE_4 COUNT_PROBE_3
  385. #endif
  386. #if ENABLED(Z_PROBE_ALLEN_KEY)
  387. #define COUNT_PROBE_5 INCREMENT(COUNT_PROBE_4)
  388. #else
  389. #define COUNT_PROBE_5 COUNT_PROBE_4
  390. #endif
  391. #if ENABLED(Z_PROBE_SLED)
  392. #define COUNT_PROBE_6 INCREMENT(COUNT_PROBE_5)
  393. #else
  394. #define COUNT_PROBE_6 COUNT_PROBE_5
  395. #endif
  396. #if COUNT_PROBE_6 > 1
  397. #error "Please enable only one probe: FIX_MOUNTED_PROBE, Z Servo, BLTOUCH, Z_PROBE_ALLEN_KEY, or Z_PROBE_SLED."
  398. #endif
  399. /**
  400. * Z_PROBE_SLED is incompatible with DELTA
  401. */
  402. #if ENABLED(Z_PROBE_SLED) && ENABLED(DELTA)
  403. #error "You cannot use Z_PROBE_SLED with DELTA."
  404. #endif
  405. /**
  406. * NUM_SERVOS is required for a Z servo probe
  407. */
  408. #if HAS_Z_SERVO_ENDSTOP
  409. #ifndef NUM_SERVOS
  410. #error "You must set NUM_SERVOS for a Z servo probe (Z_ENDSTOP_SERVO_NR)."
  411. #elif Z_ENDSTOP_SERVO_NR >= NUM_SERVOS
  412. #error "Z_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS."
  413. #endif
  414. #endif
  415. /**
  416. * Require pin options and pins to be defined
  417. */
  418. #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
  419. #if ENABLED(Z_MIN_PROBE_ENDSTOP)
  420. #error "Enable only one option: Z_MIN_PROBE_ENDSTOP or Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN."
  421. #elif DISABLED(USE_ZMIN_PLUG)
  422. #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires USE_ZMIN_PLUG to be enabled."
  423. #elif !HAS_Z_MIN
  424. #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires the Z_MIN_PIN to be defined."
  425. #endif
  426. #elif ENABLED(Z_MIN_PROBE_ENDSTOP)
  427. #if !HAS_Z_MIN_PROBE_PIN
  428. #error "Z_MIN_PROBE_ENDSTOP requires the Z_MIN_PROBE_PIN to be defined."
  429. #endif
  430. #else
  431. #error "You must enable either Z_MIN_PROBE_ENDSTOP or Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to use a probe."
  432. #endif
  433. /**
  434. * Make sure Z raise values are set
  435. */
  436. #if !defined(Z_CLEARANCE_DEPLOY_PROBE)
  437. #error "You must define Z_CLEARANCE_DEPLOY_PROBE in your configuration."
  438. #elif !defined(Z_CLEARANCE_BETWEEN_PROBES)
  439. #error "You must define Z_CLEARANCE_BETWEEN_PROBES in your configuration."
  440. #elif Z_CLEARANCE_DEPLOY_PROBE < 0
  441. #error "Probes need Z_CLEARANCE_DEPLOY_PROBE >= 0."
  442. #elif Z_CLEARANCE_BETWEEN_PROBES < 0
  443. #error "Probes need Z_CLEARANCE_BETWEEN_PROBES >= 0."
  444. #endif
  445. #else
  446. /**
  447. * Require some kind of probe for bed leveling and probe testing
  448. */
  449. #if HAS_ABL
  450. #error "Auto Bed Leveling requires a probe! Define a Z Servo, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE."
  451. #elif ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
  452. #error "Z_MIN_PROBE_REPEATABILITY_TEST requires a probe! Define a Z Servo, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE."
  453. #endif
  454. #endif
  455. /**
  456. * Homing Bump
  457. */
  458. #if X_HOME_BUMP_MM < 0 || Y_HOME_BUMP_MM < 0 || Z_HOME_BUMP_MM < 0
  459. #error "[XYZ]_HOME_BUMP_MM must be greater than or equal to 0."
  460. #endif
  461. /**
  462. * Make sure Z_SAFE_HOMING point is reachable
  463. */
  464. #if ENABLED(Z_SAFE_HOMING)
  465. #if Z_SAFE_HOMING_X_POINT < MIN_PROBE_X || Z_SAFE_HOMING_X_POINT > MAX_PROBE_X
  466. #if HAS_BED_PROBE
  467. #error "Z_SAFE_HOMING_X_POINT can't be reached by the Z probe."
  468. #else
  469. #error "Z_SAFE_HOMING_X_POINT can't be reached by the nozzle."
  470. #endif
  471. #elif Z_SAFE_HOMING_Y_POINT < MIN_PROBE_Y || Z_SAFE_HOMING_Y_POINT > MAX_PROBE_Y
  472. #if HAS_BED_PROBE
  473. #error "Z_SAFE_HOMING_Y_POINT can't be reached by the Z probe."
  474. #else
  475. #error "Z_SAFE_HOMING_Y_POINT can't be reached by the nozzle."
  476. #endif
  477. #endif
  478. #endif // Z_SAFE_HOMING
  479. /**
  480. * Auto Bed Leveling
  481. */
  482. #if HAS_ABL
  483. #if ENABLED(USE_RAW_KINEMATICS)
  484. #error "USE_RAW_KINEMATICS is not compatible with AUTO_BED_LEVELING"
  485. #endif
  486. /**
  487. * Delta and SCARA have limited bed leveling options
  488. */
  489. #if DISABLED(AUTO_BED_LEVELING_BILINEAR)
  490. #if ENABLED(DELTA)
  491. #error "Only AUTO_BED_LEVELING_BILINEAR is supported for DELTA bed leveling."
  492. #elif ENABLED(SCARA)
  493. #error "Only AUTO_BED_LEVELING_BILINEAR is supported for SCARA bed leveling."
  494. #endif
  495. #endif
  496. /**
  497. * Check if Probe_Offset * Grid Points is greater than Probing Range
  498. */
  499. #if ABL_GRID
  500. #ifndef DELTA_PROBEABLE_RADIUS
  501. // Be sure points are in the right order
  502. #if LEFT_PROBE_BED_POSITION > RIGHT_PROBE_BED_POSITION
  503. #error "LEFT_PROBE_BED_POSITION must be less than RIGHT_PROBE_BED_POSITION."
  504. #elif FRONT_PROBE_BED_POSITION > BACK_PROBE_BED_POSITION
  505. #error "FRONT_PROBE_BED_POSITION must be less than BACK_PROBE_BED_POSITION."
  506. #endif
  507. // Make sure probing points are reachable
  508. #if LEFT_PROBE_BED_POSITION < MIN_PROBE_X
  509. #error "The given LEFT_PROBE_BED_POSITION can't be reached by the Z probe."
  510. #elif RIGHT_PROBE_BED_POSITION > MAX_PROBE_X
  511. #error "The given RIGHT_PROBE_BED_POSITION can't be reached by the Z probe."
  512. #elif FRONT_PROBE_BED_POSITION < MIN_PROBE_Y
  513. #error "The given FRONT_PROBE_BED_POSITION can't be reached by the Z probe."
  514. #elif BACK_PROBE_BED_POSITION > MAX_PROBE_Y
  515. #error "The given BACK_PROBE_BED_POSITION can't be reached by the Z probe."
  516. #endif
  517. #endif
  518. #else // !ABL_GRID
  519. // Check the triangulation points
  520. #if ABL_PROBE_PT_1_X < MIN_PROBE_X || ABL_PROBE_PT_1_X > MAX_PROBE_X
  521. #error "The given ABL_PROBE_PT_1_X can't be reached by the Z probe."
  522. #elif ABL_PROBE_PT_2_X < MIN_PROBE_X || ABL_PROBE_PT_2_X > MAX_PROBE_X
  523. #error "The given ABL_PROBE_PT_2_X can't be reached by the Z probe."
  524. #elif ABL_PROBE_PT_3_X < MIN_PROBE_X || ABL_PROBE_PT_3_X > MAX_PROBE_X
  525. #error "The given ABL_PROBE_PT_3_X can't be reached by the Z probe."
  526. #elif ABL_PROBE_PT_1_Y < MIN_PROBE_Y || ABL_PROBE_PT_1_Y > MAX_PROBE_Y
  527. #error "The given ABL_PROBE_PT_1_Y can't be reached by the Z probe."
  528. #elif ABL_PROBE_PT_2_Y < MIN_PROBE_Y || ABL_PROBE_PT_2_Y > MAX_PROBE_Y
  529. #error "The given ABL_PROBE_PT_2_Y can't be reached by the Z probe."
  530. #elif ABL_PROBE_PT_3_Y < MIN_PROBE_Y || ABL_PROBE_PT_3_Y > MAX_PROBE_Y
  531. #error "The given ABL_PROBE_PT_3_Y can't be reached by the Z probe."
  532. #endif
  533. #endif // !ABL_GRID
  534. #endif // HAS_ABL
  535. /**
  536. * Advance Extrusion
  537. */
  538. #if ENABLED(ADVANCE) && ENABLED(LIN_ADVANCE)
  539. #error "You can enable ADVANCE or LIN_ADVANCE, but not both."
  540. #endif
  541. /**
  542. * Filament Width Sensor
  543. */
  544. #if ENABLED(FILAMENT_WIDTH_SENSOR) && !HAS_FILAMENT_WIDTH_SENSOR
  545. #error "FILAMENT_WIDTH_SENSOR requires a FILWIDTH_PIN to be defined."
  546. #endif
  547. /**
  548. * ULTIPANEL encoder
  549. */
  550. #if ENABLED(ULTIPANEL) && DISABLED(NEWPANEL) && DISABLED(SR_LCD_2W_NL) && !defined(SHIFT_CLK)
  551. #error "ULTIPANEL requires some kind of encoder."
  552. #endif
  553. #if ENCODER_PULSES_PER_STEP < 0
  554. #error "ENCODER_PULSES_PER_STEP should not be negative, use REVERSE_MENU_DIRECTION instead."
  555. #endif
  556. /**
  557. * SAV_3DGLCD display options
  558. */
  559. #if ENABLED(U8GLIB_SSD1306) && ENABLED(U8GLIB_SH1106)
  560. #error "Only enable one SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106."
  561. #endif
  562. /**
  563. * Don't set more than one kinematic type
  564. */
  565. #define COUNT_KIN_1 0
  566. #if ENABLED(DELTA)
  567. #define COUNT_KIN_2 INCREMENT(COUNT_KIN_1)
  568. #else
  569. #define COUNT_KIN_2 COUNT_KIN_1
  570. #endif
  571. #if ENABLED(MORGAN_SCARA)
  572. #define COUNT_KIN_3 INCREMENT(COUNT_KIN_2)
  573. #else
  574. #define COUNT_KIN_3 COUNT_KIN_2
  575. #endif
  576. #if ENABLED(MAKERARM_SCARA)
  577. #define COUNT_KIN_4 INCREMENT(COUNT_KIN_3)
  578. #else
  579. #define COUNT_KIN_4 COUNT_KIN_3
  580. #endif
  581. #if ENABLED(COREXY)
  582. #define COUNT_KIN_5 INCREMENT(COUNT_KIN_4)
  583. #else
  584. #define COUNT_KIN_5 COUNT_KIN_4
  585. #endif
  586. #if ENABLED(COREXZ)
  587. #define COUNT_KIN_6 INCREMENT(COUNT_KIN_5)
  588. #else
  589. #define COUNT_KIN_6 COUNT_KIN_5
  590. #endif
  591. #if ENABLED(COREYZ)
  592. #define COUNT_KIN_7 INCREMENT(COUNT_KIN_6)
  593. #else
  594. #define COUNT_KIN_7 COUNT_KIN_6
  595. #endif
  596. #if COUNT_KIN_7 > 1
  597. #error "Please enable only one of DELTA, MORGAN_SCARA, MAKERARM_SCARA, COREXY, COREXZ, or COREYZ."
  598. #endif
  599. /**
  600. * Allen Key
  601. * Deploying the Allen Key probe uses big moves in z direction. Too dangerous for an unhomed z-axis.
  602. */
  603. #if ENABLED(Z_PROBE_ALLEN_KEY) && (Z_HOME_DIR < 0) && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
  604. #error "You can't home to a z min endstop with a Z_PROBE_ALLEN_KEY"
  605. #endif
  606. /**
  607. * Dual X Carriage requirements
  608. */
  609. #if ENABLED(DUAL_X_CARRIAGE)
  610. #if EXTRUDERS == 1
  611. #error "DUAL_X_CARRIAGE requires 2 (or more) extruders."
  612. #elif ENABLED(COREXY) || ENABLED(COREXZ)
  613. #error "DUAL_X_CARRIAGE cannot be used with COREXY or COREXZ."
  614. #elif !HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR
  615. #error "DUAL_X_CARRIAGE requires X2 stepper pins to be defined."
  616. #elif !HAS_X_MAX
  617. #error "DUAL_X_CARRIAGE requires USE_XMAX_PLUG and an X Max Endstop."
  618. #elif !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS)
  619. #error "DUAL_X_CARRIAGE requires X2_HOME_POS, X2_MIN_POS, and X2_MAX_POS."
  620. #elif X_HOME_DIR != -1 || X2_HOME_DIR != 1
  621. #error "DUAL_X_CARRIAGE requires X_HOME_DIR -1 and X2_HOME_DIR 1."
  622. #endif
  623. #endif // DUAL_X_CARRIAGE
  624. /**
  625. * Make sure auto fan pins don't conflict with the fan pin
  626. */
  627. #if HAS_AUTO_FAN
  628. #if HAS_FAN0
  629. #if E0_AUTO_FAN_PIN == FAN_PIN
  630. #error "You cannot set E0_AUTO_FAN_PIN equal to FAN_PIN."
  631. #elif E1_AUTO_FAN_PIN == FAN_PIN
  632. #error "You cannot set E1_AUTO_FAN_PIN equal to FAN_PIN."
  633. #elif E2_AUTO_FAN_PIN == FAN_PIN
  634. #error "You cannot set E2_AUTO_FAN_PIN equal to FAN_PIN."
  635. #elif E3_AUTO_FAN_PIN == FAN_PIN
  636. #error "You cannot set E3_AUTO_FAN_PIN equal to FAN_PIN."
  637. #endif
  638. #endif
  639. #endif
  640. #if HAS_FAN0 && CONTROLLERFAN_PIN == FAN_PIN
  641. #error "You cannot set CONTROLLERFAN_PIN equal to FAN_PIN."
  642. #endif
  643. #if HAS_CONTROLLERFAN
  644. #if E0_AUTO_FAN_PIN == CONTROLLERFAN_PIN
  645. #error "You cannot set E0_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
  646. #elif E1_AUTO_FAN_PIN == CONTROLLERFAN_PIN
  647. #error "You cannot set E1_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
  648. #elif E2_AUTO_FAN_PIN == CONTROLLERFAN_PIN
  649. #error "You cannot set E2_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
  650. #elif E3_AUTO_FAN_PIN == CONTROLLERFAN_PIN
  651. #error "You cannot set E3_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
  652. #endif
  653. #endif
  654. /**
  655. * Test Heater, Temp Sensor, and Extruder Pins; Sensor Type must also be set.
  656. */
  657. #if !HAS_HEATER_0
  658. #error "HEATER_0_PIN not defined for this board."
  659. #elif !PIN_EXISTS(TEMP_0)
  660. #error "TEMP_0_PIN not defined for this board."
  661. #elif !PIN_EXISTS(E0_STEP) || !PIN_EXISTS(E0_DIR) || !PIN_EXISTS(E0_ENABLE)
  662. #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
  663. #elif TEMP_SENSOR_0 == 0
  664. #error "TEMP_SENSOR_0 is required."
  665. #endif
  666. #if HOTENDS > 1 || ENABLED(HEATERS_PARALLEL)
  667. #if !HAS_HEATER_1
  668. #error "HEATER_1_PIN not defined for this board."
  669. #endif
  670. #endif
  671. #if HOTENDS > 1
  672. #if TEMP_SENSOR_1 == 0
  673. #error "TEMP_SENSOR_1 is required with 2 or more HOTENDS."
  674. #elif !PIN_EXISTS(TEMP_1)
  675. #error "TEMP_1_PIN not defined for this board."
  676. #endif
  677. #if HOTENDS > 2
  678. #if TEMP_SENSOR_2 == 0
  679. #error "TEMP_SENSOR_2 is required with 3 or more HOTENDS."
  680. #elif !HAS_HEATER_2
  681. #error "HEATER_2_PIN not defined for this board."
  682. #elif !PIN_EXISTS(TEMP_2)
  683. #error "TEMP_2_PIN not defined for this board."
  684. #endif
  685. #if HOTENDS > 3
  686. #if TEMP_SENSOR_3 == 0
  687. #error "TEMP_SENSOR_3 is required with 4 HOTENDS."
  688. #elif !HAS_HEATER_3
  689. #error "HEATER_3_PIN not defined for this board."
  690. #elif !PIN_EXISTS(TEMP_3)
  691. #error "TEMP_3_PIN not defined for this board."
  692. #endif
  693. #elif TEMP_SENSOR_3 != 0
  694. #error "TEMP_SENSOR_3 shouldn't be set with only 3 extruders."
  695. #endif
  696. #elif TEMP_SENSOR_2 != 0
  697. #error "TEMP_SENSOR_2 shouldn't be set with only 2 extruders."
  698. #elif TEMP_SENSOR_3 != 0
  699. #error "TEMP_SENSOR_3 shouldn't be set with only 2 extruders."
  700. #endif
  701. #elif TEMP_SENSOR_1 != 0 && DISABLED(TEMP_SENSOR_1_AS_REDUNDANT)
  702. #error "TEMP_SENSOR_1 shouldn't be set with only 1 extruder."
  703. #elif TEMP_SENSOR_2 != 0
  704. #error "TEMP_SENSOR_2 shouldn't be set with only 1 extruder."
  705. #elif TEMP_SENSOR_3 != 0
  706. #error "TEMP_SENSOR_3 shouldn't be set with only 1 extruder."
  707. #endif
  708. #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) && TEMP_SENSOR_1 == 0
  709. #error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT."
  710. #endif
  711. /**
  712. * Temperature status LEDs
  713. */
  714. #if ENABLED(TEMP_STAT_LEDS) && !PIN_EXISTS(STAT_LED_RED) && !PIN_EXISTS(STAT_LED_BLUE)
  715. #error "TEMP_STAT_LEDS requires STAT_LED_RED_PIN or STAT_LED_BLUE_PIN, preferably both."
  716. #endif
  717. /**
  718. * Basic 2-nozzle duplication mode
  719. */
  720. #if ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
  721. #if HOTENDS != 2
  722. #error "DUAL_NOZZLE_DUPLICATION_MODE requires exactly 2 hotends."
  723. #elif ENABLED(DUAL_X_CARRIAGE)
  724. #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with DUAL_X_CARRIAGE."
  725. #elif ENABLED(SINGLENOZZLE)
  726. #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SINGLENOZZLE."
  727. #elif ENABLED(MIXING_EXTRUDER)
  728. #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with MIXING_EXTRUDER."
  729. #elif ENABLED(SWITCHING_EXTRUDER)
  730. #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SWITCHING_EXTRUDER."
  731. #endif
  732. #endif
  733. /**
  734. * Test Extruder Pins
  735. */
  736. #if EXTRUDERS > 3
  737. #if !PIN_EXISTS(E3_STEP) || !PIN_EXISTS(E3_DIR) || !PIN_EXISTS(E3_ENABLE)
  738. #error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board."
  739. #endif
  740. #elif EXTRUDERS > 2
  741. #if !PIN_EXISTS(E2_STEP) || !PIN_EXISTS(E2_DIR) || !PIN_EXISTS(E2_ENABLE)
  742. #error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board."
  743. #endif
  744. #elif EXTRUDERS > 1
  745. #if !PIN_EXISTS(E1_STEP) || !PIN_EXISTS(E1_DIR) || !PIN_EXISTS(E1_ENABLE)
  746. #error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board."
  747. #endif
  748. #endif
  749. /**
  750. * Endstops
  751. */
  752. #if DISABLED(USE_XMIN_PLUG) && DISABLED(USE_XMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _XMAX_ && Z2_USE_ENDSTOP <= _XMIN_)
  753. #error "You must enable USE_XMIN_PLUG or USE_XMAX_PLUG."
  754. #elif DISABLED(USE_YMIN_PLUG) && DISABLED(USE_YMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _YMAX_ && Z2_USE_ENDSTOP <= _YMIN_)
  755. #error "You must enable USE_YMIN_PLUG or USE_YMAX_PLUG."
  756. #elif DISABLED(USE_ZMIN_PLUG) && DISABLED(USE_ZMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _ZMAX_ && Z2_USE_ENDSTOP <= _ZMIN_)
  757. #error "You must enable USE_ZMIN_PLUG or USE_ZMAX_PLUG."
  758. #elif ENABLED(Z_DUAL_ENDSTOPS)
  759. #if !Z2_USE_ENDSTOP
  760. #error "You must set Z2_USE_ENDSTOP with Z_DUAL_ENDSTOPS."
  761. #elif ENABLED(DELTA)
  762. #error "Z_DUAL_ENDSTOPS is not compatible with DELTA."
  763. #endif
  764. #elif !IS_SCARA
  765. #if X_HOME_DIR < 0 && DISABLED(USE_XMIN_PLUG)
  766. #error "Enable USE_XMIN_PLUG when homing X to MIN."
  767. #elif X_HOME_DIR > 0 && DISABLED(USE_XMAX_PLUG)
  768. #error "Enable USE_XMAX_PLUG when homing X to MAX."
  769. #elif Y_HOME_DIR < 0 && DISABLED(USE_YMIN_PLUG)
  770. #error "Enable USE_YMIN_PLUG when homing Y to MIN."
  771. #elif Y_HOME_DIR > 0 && DISABLED(USE_YMAX_PLUG)
  772. #error "Enable USE_YMAX_PLUG when homing Y to MAX."
  773. #elif Z_HOME_DIR < 0 && DISABLED(USE_ZMIN_PLUG)
  774. #error "Enable USE_ZMIN_PLUG when homing Z to MIN."
  775. #elif Z_HOME_DIR > 0 && DISABLED(USE_ZMAX_PLUG)
  776. #error "Enable USE_ZMAX_PLUG when homing Z to MAX."
  777. #endif
  778. #endif
  779. /**
  780. * emergency-command parser
  781. */
  782. #if ENABLED(EMERGENCY_PARSER) && defined(USBCON)
  783. #error "EMERGENCY_PARSER does not work on boards with AT90USB processors (USBCON)."
  784. #endif
  785. /**
  786. * I2C bus
  787. */
  788. #if ENABLED(EXPERIMENTAL_I2CBUS) && I2C_SLAVE_ADDRESS > 0
  789. #if I2C_SLAVE_ADDRESS < 8
  790. #error "I2C_SLAVE_ADDRESS can't be less than 8. (Addresses 0 - 7 are reserved.)"
  791. #elif I2C_SLAVE_ADDRESS > 127
  792. #error "I2C_SLAVE_ADDRESS can't be over 127. (Only 7 bits allowed.)"
  793. #endif
  794. #endif
  795. /**
  796. * G38 Probe Target
  797. */
  798. #if ENABLED(G38_PROBE_TARGET)
  799. #if !HAS_BED_PROBE
  800. #error "G38_PROBE_TARGET requires a bed probe."
  801. #elif !IS_CARTESIAN
  802. #error "G38_PROBE_TARGET requires a Cartesian machine."
  803. #endif
  804. #endif
  805. /**
  806. * Auto Fan check for PWM pins
  807. */
  808. #if HAS_AUTO_FAN && EXTRUDER_AUTO_FAN_SPEED != 255
  809. #define AF_ERR_SUFF "_AUTO_FAN_PIN is not a PWM pin. Set EXTRUDER_AUTO_FAN_SPEED to 255."
  810. #if HAS_AUTO_FAN_0
  811. static_assert(GET_TIMER(E0_AUTO_FAN_PIN), "E0" AF_ERR_SUFF);
  812. #elif HAS_AUTO_FAN_1
  813. static_assert(GET_TIMER(E1_AUTO_FAN_PIN), "E1" AF_ERR_SUFF);
  814. #elif HAS_AUTO_FAN_2
  815. static_assert(GET_TIMER(E2_AUTO_FAN_PIN), "E2" AF_ERR_SUFF);
  816. #elif HAS_AUTO_FAN_3
  817. static_assert(GET_TIMER(E3_AUTO_FAN_PIN), "E3" AF_ERR_SUFF);
  818. #endif
  819. #endif
  820. /**
  821. * Make sure only one display is enabled
  822. *
  823. * Note: BQ_LCD_SMART_CONTROLLER => REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
  824. * REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER => REPRAP_DISCOUNT_SMART_CONTROLLER
  825. * SAV_3DGLCD => U8GLIB_SH1106 => ULTIMAKERCONTROLLER
  826. * miniVIKI => ULTIMAKERCONTROLLER
  827. * VIKI2 => ULTIMAKERCONTROLLER
  828. * ELB_FULL_GRAPHIC_CONTROLLER => ULTIMAKERCONTROLLER
  829. * PANEL_ONE => ULTIMAKERCONTROLLER
  830. */
  831. #define COUNT_LCD_1 0
  832. #if ENABLED(ULTIMAKERCONTROLLER) \
  833. && DISABLED(SAV_3DGLCD) && DISABLED(miniVIKI) && DISABLED(VIKI2) \
  834. && DISABLED(ELB_FULL_GRAPHIC_CONTROLLER) && DISABLED(PANEL_ONE)
  835. #define COUNT_LCD_2 INCREMENT(COUNT_LCD_1)
  836. #else
  837. #define COUNT_LCD_2 COUNT_LCD_1
  838. #endif
  839. #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && DISABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
  840. #define COUNT_LCD_3 INCREMENT(COUNT_LCD_2)
  841. #else
  842. #define COUNT_LCD_3 COUNT_LCD_2
  843. #endif
  844. #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(BQ_LCD_SMART_CONTROLLER)
  845. #define COUNT_LCD_4 INCREMENT(COUNT_LCD_3)
  846. #else
  847. #define COUNT_LCD_4 COUNT_LCD_3
  848. #endif
  849. #if ENABLED(CARTESIO_UI)
  850. #define COUNT_LCD_5 INCREMENT(COUNT_LCD_4)
  851. #else
  852. #define COUNT_LCD_5 COUNT_LCD_4
  853. #endif
  854. #if ENABLED(PANEL_ONE)
  855. #define COUNT_LCD_6 INCREMENT(COUNT_LCD_5)
  856. #else
  857. #define COUNT_LCD_6 COUNT_LCD_5
  858. #endif
  859. #if ENABLED(MAKRPANEL)
  860. #define COUNT_LCD_7 INCREMENT(COUNT_LCD_6)
  861. #else
  862. #define COUNT_LCD_7 COUNT_LCD_6
  863. #endif
  864. #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
  865. #define COUNT_LCD_8 INCREMENT(COUNT_LCD_7)
  866. #else
  867. #define COUNT_LCD_8 COUNT_LCD_7
  868. #endif
  869. #if ENABLED(VIKI2)
  870. #define COUNT_LCD_9 INCREMENT(COUNT_LCD_8)
  871. #else
  872. #define COUNT_LCD_9 COUNT_LCD_8
  873. #endif
  874. #if ENABLED(miniVIKI)
  875. #define COUNT_LCD_10 INCREMENT(COUNT_LCD_9)
  876. #else
  877. #define COUNT_LCD_10 COUNT_LCD_9
  878. #endif
  879. #if ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
  880. #define COUNT_LCD_11 INCREMENT(COUNT_LCD_10)
  881. #else
  882. #define COUNT_LCD_11 COUNT_LCD_10
  883. #endif
  884. #if ENABLED(G3D_PANEL)
  885. #define COUNT_LCD_12 INCREMENT(COUNT_LCD_11)
  886. #else
  887. #define COUNT_LCD_12 COUNT_LCD_11
  888. #endif
  889. #if ENABLED(MINIPANEL)
  890. #define COUNT_LCD_13 INCREMENT(COUNT_LCD_12)
  891. #else
  892. #define COUNT_LCD_13 COUNT_LCD_12
  893. #endif
  894. #if ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(CARTESIO_UI)
  895. #define COUNT_LCD_14 INCREMENT(COUNT_LCD_13)
  896. #else
  897. #define COUNT_LCD_14 COUNT_LCD_13
  898. #endif
  899. #if ENABLED(RIGIDBOT_PANEL)
  900. #define COUNT_LCD_15 INCREMENT(COUNT_LCD_14)
  901. #else
  902. #define COUNT_LCD_15 COUNT_LCD_14
  903. #endif
  904. #if ENABLED(RA_CONTROL_PANEL)
  905. #define COUNT_LCD_16 INCREMENT(COUNT_LCD_15)
  906. #else
  907. #define COUNT_LCD_16 COUNT_LCD_15
  908. #endif
  909. #if ENABLED(LCD_I2C_SAINSMART_YWROBOT)
  910. #define COUNT_LCD_17 INCREMENT(COUNT_LCD_16)
  911. #else
  912. #define COUNT_LCD_17 COUNT_LCD_16
  913. #endif
  914. #if ENABLED(LCM1602)
  915. #define COUNT_LCD_18 INCREMENT(COUNT_LCD_17)
  916. #else
  917. #define COUNT_LCD_18 COUNT_LCD_17
  918. #endif
  919. #if ENABLED(LCD_I2C_PANELOLU2)
  920. #define COUNT_LCD_19 INCREMENT(COUNT_LCD_18)
  921. #else
  922. #define COUNT_LCD_19 COUNT_LCD_18
  923. #endif
  924. #if ENABLED(LCD_I2C_VIKI)
  925. #define COUNT_LCD_20 INCREMENT(COUNT_LCD_19)
  926. #else
  927. #define COUNT_LCD_20 COUNT_LCD_19
  928. #endif
  929. #if ENABLED(U8GLIB_SSD1306)
  930. #define COUNT_LCD_21 INCREMENT(COUNT_LCD_20)
  931. #else
  932. #define COUNT_LCD_21 COUNT_LCD_20
  933. #endif
  934. #if ENABLED(SAV_3DLCD)
  935. #define COUNT_LCD_22 INCREMENT(COUNT_LCD_21)
  936. #else
  937. #define COUNT_LCD_22 COUNT_LCD_21
  938. #endif
  939. #if ENABLED(BQ_LCD_SMART_CONTROLLER)
  940. #define COUNT_LCD_23 INCREMENT(COUNT_LCD_22)
  941. #else
  942. #define COUNT_LCD_23 COUNT_LCD_22
  943. #endif
  944. #if ENABLED(SAV_3DGLCD)
  945. #define COUNT_LCD_24 INCREMENT(COUNT_LCD_23)
  946. #else
  947. #define COUNT_LCD_24 COUNT_LCD_23
  948. #endif
  949. #if COUNT_LCD_24 > 1
  950. #error "Please select no more than one LCD controller option."
  951. #endif