123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
- /**
- * Cohesion3D Mini pin assignments
- */
-
- #ifndef LPC1769
- #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
- #endif
-
- #define BOARD_NAME "Cohesion3D Mini"
-
- //
- // Servos
- //
- #define SERVO0_PIN P1_23
-
- //
- // Limit Switches
- //
- #define X_MIN_PIN P1_24 // 10k pullup to 3.3V
- #define X_MAX_PIN P1_25 // 10k pullup to 3.3V
- #define Y_MIN_PIN P1_26 // 10k pullup to 3.3V
- #define Y_MAX_PIN P1_27 // 10k pullup to 3.3V
- #define Z_MIN_PIN P1_28 // 10k pullup to 3.3V
- #define Z_MAX_PIN P1_29 // 10k pullup to 3.3V
-
- //
- // Steppers
- //
- #define X_STEP_PIN P2_00
- #define X_DIR_PIN P0_05
- #define X_ENABLE_PIN P0_04
- #define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9
-
- #define Y_STEP_PIN P2_01
- #define Y_DIR_PIN P0_11
- #define Y_ENABLE_PIN P0_10
- #define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10
-
- #define Z_STEP_PIN P2_02
- #define Z_DIR_PIN P0_20
- #define Z_ENABLE_PIN P0_19
- #define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11
-
- #define E0_STEP_PIN P2_03
- #define E0_DIR_PIN P0_22
- #define E0_ENABLE_PIN P0_21
- #define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12
-
- //
- // Default pins for TMC software SPI
- //
- #if ENABLED(TMC_USE_SW_SPI)
- #ifndef TMC_SW_MOSI
- #define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5
- #endif
- #ifndef TMC_SW_MISO
- #define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6
- #endif
- #ifndef TMC_SW_SCK
- #define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7
- #endif
- #endif
-
- //
- // Analog Inputs
- // 3.3V max when defined as an analog input
- //
- #define TEMP_0_PIN 0 // P0_23
- #define TEMP_BED_PIN 1 // P0_24
-
- //
- // Heaters / Fans
- //
- #define HEATER_BED_PIN P2_05
- #define HEATER_0_PIN P2_07 // FET 1
- #ifndef FAN_PIN
- #define FAN_PIN P2_06 // FET 3
- #endif
-
- //
- // Auto fans
- //
- #define AUTO_FAN_PIN P2_04 // FET 4
-
- #define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN
- #define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN
- #define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN
-
- //
- // Misc. Functions
- //
- #define LED_PIN P4_28 // Play LED
-
- //
- // M3/M4/M5 - Spindle/Laser Control
- //
- #if HAS_CUTTER
- #undef HEATER_0_PIN
- #define SPINDLE_LASER_ENA_PIN P2_07 // FET 1
- #undef HEATER_BED_PIN
- #define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET
- #undef FAN_PIN
- #define SPINDLE_DIR_PIN P2_06 // FET 3
- #endif
-
- //
- // LCD / Controller
- //
- // LCD_PINS_D5, D6, and D7 are not present in the EXP1 connector, and will need to be
- // defined to use the REPRAP_DISCOUNT_SMART_CONTROLLER.
- //
- // A remote SD card is currently not supported because the pins routed to the EXP2
- // connector are shared with the onboard SD card, and Marlin does not support reading
- // G-code files from the onboard SD card.
- //
- #if HAS_SPI_LCD
-
- #define BEEPER_PIN P0_27 // EXP2-7 - open drain
-
- #define BTN_EN1 P3_26 // EXP2-5
- #define BTN_EN2 P3_25 // EXP2-3
- #define BTN_ENC P1_30 // EXP1-2
-
- #define LCD_PINS_RS P0_16 // EXP1-4
- #define LCD_SDSS P0_28 // EXP2-4
- #define LCD_PINS_ENABLE P0_18 // EXP1-3
- #define LCD_PINS_D4 P0_15 // EXP1-5
-
- #define KILL_PIN P2_11 // EXP2-10
-
- #if ENABLED(SDSUPPORT)
- #error "SDSUPPORT is not currently supported by the Cohesion3D boards"
- #endif
-
- #endif // HAS_SPI_LCD
-
- //
- // Ethernet pins
- //
- #define ENET_MDIO P1_17
- #define ENET_RX_ER P1_14
- #define ENET_RXD1 P1_10
- #define ENET_MOC P1_16
- #define REF_CLK P1_15
- #define ENET_RXD0 P1_09
- #define ENET_CRS P1_08
- #define ENET_TX_EN P1_04
- #define ENET_TXD0 P1_00
- #define ENET_TXD1 P1_01
|