123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
- #if !defined(__STM32F1__) && !defined(__STM32F4__)
- #error "Oops! Select an STM32F1/4 board in 'Tools > Board.'"
- #endif
-
- /**
- * 21017 Victor Perez Marlin for stm32f1 test
- */
-
- #define DEFAULT_MACHINE_NAME "STM3R Mini"
- #define BOARD_NAME "Marlin for STM32"
-
- // Enable I2C_EEPROM for testing
- #define I2C_EEPROM
-
- // Ignore temp readings during develpment.
- #define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
-
- //
- // Limit Switches
- //
- #define U_MIN_PIN -1
- #define V_MIN_PIN -1
- #define W_MIN_PIN -1
- #define X_STOP_PIN PD0
- #define Y_STOP_PIN PD1
- #define Z_STOP_PIN PD4
-
- //
- // Steppers
- //
- #define X_STEP_PIN PE1
- #define X_DIR_PIN PE0
- #define X_ENABLE_PIN PC0
-
- #define Y_STEP_PIN PE3
- #define Y_DIR_PIN PE2
- #define Y_ENABLE_PIN PC1
-
- #define Z_STEP_PIN PE5
- #define Z_DIR_PIN PE4
- #define Z_ENABLE_PIN PC2
-
- #define E0_STEP_PIN PE7
- #define E0_DIR_PIN PE6
- #define E0_ENABLE_PIN PC3
-
- #define E1_STEP_PIN PE9
- #define E1_DIR_PIN PE8
- #define E1_ENABLE_PIN PC4
-
- #define E2_STEP_PIN PE11
- #define E2_DIR_PIN PE10
- #define E2_ENABLE_PIN PC5
-
- //
- // Misc. Functions
- //
- #define SDSS PA15
- #define LED_PIN PB2
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN PD12 // EXTRUDER 1
- //#define HEATER_1_PIN PD13
-
- #define HEATER_BED_PIN PB9 // BED
- //#define HEATER_BED2_PIN -1 // BED2
- //#define HEATER_BED3_PIN -1 // BED3
-
- #ifndef FAN_PIN
- #define FAN_PIN PD14
- #endif
- #define FAN1_PIN PD13
-
- #define FAN_SOFT_PWM
-
- //
- // Temperature Sensors
- //
- #define TEMP_BED_PIN PA0
- #define TEMP_0_PIN PA1
- #define TEMP_1_PIN PA2
- #define TEMP_2_PIN PA3
-
- // Laser control
- #if HAS_CUTTER
- #define SPINDLE_LASER_PWM_PIN PB8
- #define SPINDLE_LASER_ENA_PIN PD5
- #endif
-
- //
- // LCD Pins
- //
- #if HAS_SPI_LCD
-
- #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
- #define LCD_PINS_RS 49 // CS chip select /SS chip slave select
- #define LCD_PINS_ENABLE 51 // SID (MOSI)
- #define LCD_PINS_D4 52 // SCK (CLK) clock
- #elif BOTH(NEWPANEL, PANEL_ONE)
- #define LCD_PINS_RS PB8
- #define LCD_PINS_ENABLE PD2
- #define LCD_PINS_D4 PB12
- #define LCD_PINS_D5 PB13
- #define LCD_PINS_D6 PB14
- #define LCD_PINS_D7 PB15
- #else
- #define LCD_PINS_RS PB8
- #define LCD_PINS_ENABLE PD2
- #define LCD_PINS_D4 PB12
- #define LCD_PINS_D5 PB13
- #define LCD_PINS_D6 PB14
- #define LCD_PINS_D7 PB15
- #if DISABLED(NEWPANEL)
- #define BEEPER_PIN 33
- // Buttons are attached to a shift register
- // Not wired yet
- //#define SHIFT_CLK 38
- //#define SHIFT_LD 42
- //#define SHIFT_OUT 40
- //#define SHIFT_EN 17
- #endif
- #endif
-
- #if ENABLED(NEWPANEL)
-
- #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
-
- #define BEEPER_PIN 37
-
- #define BTN_EN1 31
- #define BTN_EN2 33
- #define BTN_ENC 35
-
- #define SD_DETECT_PIN 49
- #define KILL_PIN 41
-
- #if ENABLED(BQ_LCD_SMART_CONTROLLER)
- #define LCD_BACKLIGHT_PIN 39
- #endif
-
- #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
-
- #define BTN_EN1 64
- #define BTN_EN2 59
- #define BTN_ENC 63
- #define SD_DETECT_PIN 42
-
- #elif ENABLED(LCD_I2C_PANELOLU2)
-
- #define BTN_EN1 47
- #define BTN_EN2 43
- #define BTN_ENC 32
- #define LCD_SDSS 53
- #define SD_DETECT_PIN -1
- #define KILL_PIN 41
-
- #elif ENABLED(LCD_I2C_VIKI)
-
- #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
- #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
-
- #define BTN_ENC -1
- #define LCD_SDSS 53
- #define SD_DETECT_PIN 49
-
- #elif ANY(VIKI2, miniVIKI)
-
- #define BEEPER_PIN 33
-
- // Pins for DOGM SPI LCD Support
- #define DOGLCD_A0 44
- #define DOGLCD_CS 45
- #define LCD_SCREEN_ROT_180
-
- #define BTN_EN1 22
- #define BTN_EN2 7
- #define BTN_ENC 39
-
- #define SDSS 53
- #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
-
- #define KILL_PIN 31
-
- #define STAT_LED_RED_PIN 32
- #define STAT_LED_BLUE_PIN 35
-
- #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
-
- #define BTN_EN1 35
- #define BTN_EN2 37
- #define BTN_ENC 31
- #define SD_DETECT_PIN 49
- #define LCD_SDSS 53
- #define KILL_PIN 41
- #define BEEPER_PIN 23
- #define DOGLCD_CS 29
- #define DOGLCD_A0 27
- #define LCD_BACKLIGHT_PIN 33
-
- #elif ENABLED(MINIPANEL)
-
- #define BEEPER_PIN 42
- // Pins for DOGM SPI LCD Support
- #define DOGLCD_A0 44
- #define DOGLCD_CS 66
- #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
- #define SDSS 53
-
- #define KILL_PIN 64
- // GLCD features
- // Uncomment screen orientation
- //#define LCD_SCREEN_ROT_90
- //#define LCD_SCREEN_ROT_180
- //#define LCD_SCREEN_ROT_270
- // The encoder and click button
- #define BTN_EN1 40
- #define BTN_EN2 63
- #define BTN_ENC 59
- // not connected to a pin
- #define SD_DETECT_PIN 49
-
- #else
-
- // Beeper on AUX-4
- #define BEEPER_PIN 33
-
- // buttons are directly attached using AUX-2
- #if ENABLED(REPRAPWORLD_KEYPAD)
- #define BTN_EN1 64
- #define BTN_EN2 59
- #define BTN_ENC 63
- #define SHIFT_OUT 40
- #define SHIFT_CLK 44
- #define SHIFT_LD 42
- #elif ENABLED(PANEL_ONE)
- #define BTN_EN1 59 // AUX2 PIN 3
- #define BTN_EN2 63 // AUX2 PIN 4
- #define BTN_ENC 49 // AUX3 PIN 7
- #else
- #define BTN_EN1 37
- #define BTN_EN2 35
- #define BTN_ENC 31
- #endif
-
- #if ENABLED(G3D_PANEL)
- #define SD_DETECT_PIN 49
- #define KILL_PIN 41
- #else
- //#define SD_DETECT_PIN -1 // Ramps doesn't use this
- #endif
-
- #endif
- #endif // NEWPANEL
-
- #endif // HAS_SPI_LCD
|