12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202520262027202820292030203120322033203420352036203720382039204020412042204320442045204620472048204920502051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087208820892090209120922093209420952096209720982099210021012102210321042105210621072108210921102111211221132114211521162117211821192120212121222123212421252126212721282129213021312132213321342135213621372138213921402141214221432144214521462147214821492150215121522153215421552156215721582159216021612162216321642165216621672168216921702171217221732174217521762177217821792180218121822183218421852186218721882189219021912192219321942195219621972198219922002201220222032204220522062207220822092210221122122213221422152216221722182219222022212222222322242225222622272228222922302231223222332234223522362237223822392240224122422243224422452246224722482249225022512252225322542255225622572258225922602261226222632264226522662267226822692270227122722273227422752276227722782279228022812282228322842285228622872288228922902291229222932294229522962297229822992300230123022303230423052306230723082309231023112312231323142315231623172318231923202321232223232324232523262327232823292330233123322333233423352336233723382339234023412342234323442345234623472348234923502351235223532354235523562357235823592360236123622363236423652366236723682369237023712372237323742375237623772378237923802381238223832384238523862387238823892390239123922393239423952396239723982399240024012402240324042405240624072408240924102411241224132414241524162417241824192420242124222423242424252426242724282429243024312432243324342435243624372438243924402441244224432444244524462447244824492450245124522453245424552456245724582459246024612462246324642465246624672468246924702471247224732474247524762477247824792480248124822483248424852486248724882489249024912492249324942495249624972498249925002501250225032504250525062507250825092510251125122513251425152516251725182519252025212522252325242525252625272528252925302531253225332534253525362537253825392540254125422543254425452546254725482549255025512552255325542555255625572558255925602561 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * SanityCheck.h
- *
- * Test configuration values for errors at compile-time.
- */
-
- /**
- * Require gcc 4.7 or newer (first included with Arduino 1.6.8) for C++11 features.
- */
- #if __cplusplus < 201103L
- #error "Marlin requires C++11 support (gcc >= 4.7, Arduino IDE >= 1.6.8). Please upgrade your toolchain."
- #endif
-
- /**
- * We try our best to include sanity checks for all changed configuration
- * directives because users have a tendency to use outdated config files with
- * the bleeding-edge source code, but sometimes this is not enough. This check
- * forces a minimum config file revision. Otherwise Marlin will not build.
- */
- #define HEXIFY(H) _CAT(0x,H)
- #if !defined(CONFIGURATION_H_VERSION) || HEXIFY(CONFIGURATION_H_VERSION) < HEXIFY(REQUIRED_CONFIGURATION_H_VERSION)
- #error "You are using an old Configuration.h file, update it before building Marlin."
- #endif
-
- #if !defined(CONFIGURATION_ADV_H_VERSION) || HEXIFY(CONFIGURATION_ADV_H_VERSION) < HEXIFY(REQUIRED_CONFIGURATION_ADV_H_VERSION)
- #error "You are using an old Configuration_adv.h file, update it before building Marlin."
- #endif
- #undef HEXIFY
-
- /**
- * Warnings for old configurations
- */
- #ifndef MOTHERBOARD
- #error "MOTHERBOARD is required. Please update your configuration."
- #elif !defined(X_BED_SIZE) || !defined(Y_BED_SIZE)
- #error "X_BED_SIZE and Y_BED_SIZE are now required! Please update your configuration."
- #elif WATCH_TEMP_PERIOD > 500
- #error "WATCH_TEMP_PERIOD now uses seconds instead of milliseconds."
- #elif DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD))
- #error "Thermal Runaway Protection for hotends is now enabled with THERMAL_PROTECTION_HOTENDS."
- #elif DISABLED(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD)
- #error "Thermal Runaway Protection for the bed is now enabled with THERMAL_PROTECTION_BED."
- #elif (CORE_IS_XZ || CORE_IS_YZ) && ENABLED(Z_LATE_ENABLE)
- #error "Z_LATE_ENABLE can't be used with COREXZ, COREZX, COREYZ, or COREZY."
- #elif defined(X_HOME_RETRACT_MM)
- #error "[XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM."
- #elif defined(SDCARDDETECTINVERTED)
- #error "SDCARDDETECTINVERTED is now SD_DETECT_INVERTED. Please update your configuration."
- #elif defined(BTENABLED)
- #error "BTENABLED is now BLUETOOTH. Please update your configuration."
- #elif defined(CUSTOM_MENDEL_NAME)
- #error "CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME. Please update your configuration."
- #elif defined(HAS_AUTOMATIC_VERSIONING)
- #error "HAS_AUTOMATIC_VERSIONING is now CUSTOM_VERSION_FILE. Please update your configuration."
- #elif defined(USE_AUTOMATIC_VERSIONING)
- #error "USE_AUTOMATIC_VERSIONING is now CUSTOM_VERSION_FILE. Please update your configuration."
- #elif defined(SDSLOW)
- #error "SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead."
- #elif defined(SDEXTRASLOW)
- #error "SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead."
- #elif defined(FILAMENT_SENSOR)
- #error "FILAMENT_SENSOR is now FILAMENT_WIDTH_SENSOR. Please update your configuration."
- #elif defined(ENDSTOPPULLUP_FIL_RUNOUT)
- #error "ENDSTOPPULLUP_FIL_RUNOUT is now FIL_RUNOUT_PULLUP. Please update your configuration."
- #elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS)
- #error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead."
- #elif defined(LANGUAGE_INCLUDE)
- #error "LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE. Please update your configuration."
- #elif defined(EXTRUDER_OFFSET_X) || defined(EXTRUDER_OFFSET_Y)
- #error "EXTRUDER_OFFSET_[XY] is deprecated. Use HOTEND_OFFSET_[XY] instead."
- #elif defined(PID_PARAMS_PER_EXTRUDER)
- #error "PID_PARAMS_PER_EXTRUDER is deprecated. Use PID_PARAMS_PER_HOTEND instead."
- #elif defined(EXTRUDER_WATTS) || defined(BED_WATTS)
- #error "EXTRUDER_WATTS and BED_WATTS are deprecated. Remove them from your configuration."
- #elif defined(SERVO_ENDSTOP_ANGLES)
- #error "SERVO_ENDSTOP_ANGLES is deprecated. Use Z_SERVO_ANGLES instead."
- #elif defined(X_ENDSTOP_SERVO_NR) || defined(Y_ENDSTOP_SERVO_NR)
- #error "X_ENDSTOP_SERVO_NR and Y_ENDSTOP_SERVO_NR are deprecated and should be removed."
- #elif defined(Z_ENDSTOP_SERVO_NR)
- #error "Z_ENDSTOP_SERVO_NR is now Z_PROBE_SERVO_NR. Please update your configuration."
- #elif defined(DEFAULT_XYJERK)
- #error "DEFAULT_XYJERK is deprecated. Use DEFAULT_XJERK and DEFAULT_YJERK instead."
- #elif defined(XY_TRAVEL_SPEED)
- #error "XY_TRAVEL_SPEED is deprecated. Use XY_PROBE_SPEED instead."
- #elif defined(PROBE_SERVO_DEACTIVATION_DELAY)
- #error "PROBE_SERVO_DEACTIVATION_DELAY is deprecated. Use DEACTIVATE_SERVOS_AFTER_MOVE instead."
- #elif defined(SERVO_DEACTIVATION_DELAY)
- #error "SERVO_DEACTIVATION_DELAY is deprecated. Use SERVO_DELAY instead."
- #elif ENABLED(FILAMENTCHANGEENABLE)
- #error "FILAMENTCHANGEENABLE is now ADVANCED_PAUSE_FEATURE. Please update your configuration."
- #elif ENABLED(FILAMENT_CHANGE_FEATURE)
- #error "FILAMENT_CHANGE_FEATURE is now ADVANCED_PAUSE_FEATURE. Please update your configuration."
- #elif defined(FILAMENT_CHANGE_X_POS) || defined(FILAMENT_CHANGE_Y_POS)
- #error "FILAMENT_CHANGE_[XY]_POS is now set with NOZZLE_PARK_POINT. Please update your configuration."
- #elif defined(FILAMENT_CHANGE_Z_ADD)
- #error "FILAMENT_CHANGE_Z_ADD is now set with NOZZLE_PARK_POINT. Please update your configuration."
- #elif defined(FILAMENT_CHANGE_XY_FEEDRATE)
- #error "FILAMENT_CHANGE_XY_FEEDRATE is now NOZZLE_PARK_XY_FEEDRATE. Please update your configuration."
- #elif defined(FILAMENT_CHANGE_Z_FEEDRATE)
- #error "FILAMENT_CHANGE_Z_FEEDRATE is now NOZZLE_PARK_Z_FEEDRATE. Please update your configuration."
- #elif defined(PAUSE_PARK_X_POS) || defined(PAUSE_PARK_Y_POS)
- #error "PAUSE_PARK_[XY]_POS is now set with NOZZLE_PARK_POINT. Please update your configuration."
- #elif defined(PAUSE_PARK_Z_ADD)
- #error "PAUSE_PARK_Z_ADD is now set with NOZZLE_PARK_POINT. Please update your configuration."
- #elif defined(PAUSE_PARK_XY_FEEDRATE)
- #error "PAUSE_PARK_XY_FEEDRATE is now NOZZLE_PARK_XY_FEEDRATE. Please update your configuration."
- #elif defined(PAUSE_PARK_Z_FEEDRATE)
- #error "PAUSE_PARK_Z_FEEDRATE is now NOZZLE_PARK_Z_FEEDRATE. Please update your configuration."
- #elif defined(FILAMENT_CHANGE_RETRACT_FEEDRATE)
- #error "FILAMENT_CHANGE_RETRACT_FEEDRATE is now PAUSE_PARK_RETRACT_FEEDRATE. Please update your configuration."
- #elif defined(FILAMENT_CHANGE_RETRACT_LENGTH)
- #error "FILAMENT_CHANGE_RETRACT_LENGTH is now PAUSE_PARK_RETRACT_LENGTH. Please update your configuration."
- #elif defined(FILAMENT_CHANGE_EXTRUDE_FEEDRATE)
- #error "FILAMENT_CHANGE_EXTRUDE_FEEDRATE is now ADVANCED_PAUSE_PURGE_FEEDRATE. Please update your configuration."
- #elif defined(ADVANCED_PAUSE_EXTRUDE_FEEDRATE)
- #error "ADVANCED_PAUSE_EXTRUDE_FEEDRATE is now ADVANCED_PAUSE_PURGE_FEEDRATE. Please update your configuration."
- #elif defined(FILAMENT_CHANGE_EXTRUDE_LENGTH)
- #error "FILAMENT_CHANGE_EXTRUDE_LENGTH is now ADVANCED_PAUSE_PURGE_LENGTH. Please update your configuration."
- #elif defined(ADVANCED_PAUSE_EXTRUDE_LENGTH)
- #error "ADVANCED_PAUSE_EXTRUDE_LENGTH is now ADVANCED_PAUSE_PURGE_LENGTH. Please update your configuration."
- #elif defined(FILAMENT_CHANGE_NOZZLE_TIMEOUT)
- #error "FILAMENT_CHANGE_NOZZLE_TIMEOUT is now PAUSE_PARK_NOZZLE_TIMEOUT. Please update your configuration."
- #elif defined(FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS)
- #error "FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS is now FILAMENT_CHANGE_ALERT_BEEPS. Please update your configuration."
- #elif defined(FILAMENT_CHANGE_NO_STEPPER_TIMEOUT)
- #error "FILAMENT_CHANGE_NO_STEPPER_TIMEOUT is now PAUSE_PARK_NO_STEPPER_TIMEOUT. Please update your configuration."
- #elif defined(PLA_PREHEAT_HOTEND_TEMP)
- #error "PLA_PREHEAT_HOTEND_TEMP is now PREHEAT_1_TEMP_HOTEND. Please update your configuration."
- #elif defined(PLA_PREHEAT_HPB_TEMP)
- #error "PLA_PREHEAT_HPB_TEMP is now PREHEAT_1_TEMP_BED. Please update your configuration."
- #elif defined(PLA_PREHEAT_FAN_SPEED)
- #error "PLA_PREHEAT_FAN_SPEED is now PREHEAT_1_FAN_SPEED. Please update your configuration."
- #elif defined(ABS_PREHEAT_HOTEND_TEMP)
- #error "ABS_PREHEAT_HOTEND_TEMP is now PREHEAT_2_TEMP_HOTEND. Please update your configuration."
- #elif defined(ABS_PREHEAT_HPB_TEMP)
- #error "ABS_PREHEAT_HPB_TEMP is now PREHEAT_2_TEMP_BED. Please update your configuration."
- #elif defined(ABS_PREHEAT_FAN_SPEED)
- #error "ABS_PREHEAT_FAN_SPEED is now PREHEAT_2_FAN_SPEED. Please update your configuration."
- #elif defined(ENDSTOPS_ONLY_FOR_HOMING)
- #error "ENDSTOPS_ONLY_FOR_HOMING is deprecated. Use (disable) ENDSTOPS_ALWAYS_ON_DEFAULT instead."
- #elif defined(HOMING_FEEDRATE)
- #error "HOMING_FEEDRATE is deprecated. Set individual rates with HOMING_FEEDRATE_(XY|Z|E) instead."
- #elif defined(MANUAL_HOME_POSITIONS)
- #error "MANUAL_HOME_POSITIONS is deprecated. Set MANUAL_[XYZ]_HOME_POS as-needed instead."
- #elif defined(PID_ADD_EXTRUSION_RATE)
- #error "PID_ADD_EXTRUSION_RATE is now PID_EXTRUSION_SCALING and is DISABLED by default. Are you sure you want to use this option? Please update your configuration."
- #elif defined(Z_RAISE_BEFORE_HOMING)
- #error "Z_RAISE_BEFORE_HOMING is now Z_HOMING_HEIGHT. Please update your configuration."
- #elif defined(MIN_Z_HEIGHT_FOR_HOMING)
- #error "MIN_Z_HEIGHT_FOR_HOMING is now Z_HOMING_HEIGHT. Please update your configuration."
- #elif defined(Z_RAISE_BEFORE_PROBING) || defined(Z_RAISE_AFTER_PROBING)
- #error "Z_RAISE_(BEFORE|AFTER)_PROBING are deprecated. Use Z_CLEARANCE_DEPLOY_PROBE and Z_AFTER_PROBING instead."
- #elif defined(Z_RAISE_PROBE_DEPLOY_STOW) || defined(Z_RAISE_BETWEEN_PROBINGS)
- #error "Z_RAISE_PROBE_DEPLOY_STOW and Z_RAISE_BETWEEN_PROBINGS are now Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES. Please update your configuration."
- #elif defined(Z_PROBE_DEPLOY_HEIGHT) || defined(Z_PROBE_TRAVEL_HEIGHT)
- #error "Z_PROBE_DEPLOY_HEIGHT and Z_PROBE_TRAVEL_HEIGHT are now Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES. Please update your configuration."
- #elif defined(MANUAL_BED_LEVELING)
- #error "MANUAL_BED_LEVELING is now LCD_BED_LEVELING. Please update your configuration."
- #elif defined(MESH_HOME_SEARCH_Z)
- #error "MESH_HOME_SEARCH_Z is now LCD_PROBE_Z_RANGE. Please update your configuration."
- #elif defined(MANUAL_PROBE_Z_RANGE)
- #error "MANUAL_PROBE_Z_RANGE is now LCD_PROBE_Z_RANGE. Please update your configuration."
- #elif !defined(MIN_STEPS_PER_SEGMENT)
- #error Please replace "const int dropsegments" with "#define MIN_STEPS_PER_SEGMENT" (and increase by 1) in Configuration_adv.h.
- #elif MIN_STEPS_PER_SEGMENT <= 0
- #error "MIN_STEPS_PER_SEGMENT must be at least 1. Please update your Configuration_adv.h."
- #elif defined(PREVENT_DANGEROUS_EXTRUDE)
- #error "PREVENT_DANGEROUS_EXTRUDE is now PREVENT_COLD_EXTRUSION. Please update your configuration."
- #elif defined(SCARA)
- #error "SCARA is now MORGAN_SCARA. Please update your configuration."
- #elif defined(ENABLE_AUTO_BED_LEVELING)
- #error "ENABLE_AUTO_BED_LEVELING is deprecated. Specify AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_3POINT."
- #elif defined(AUTO_BED_LEVELING_FEATURE)
- #error "AUTO_BED_LEVELING_FEATURE is deprecated. Specify AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_3POINT."
- #elif defined(ABL_GRID_POINTS)
- #error "ABL_GRID_POINTS is now GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y. Please update your configuration."
- #elif defined(ABL_GRID_POINTS_X) || defined(ABL_GRID_POINTS_Y)
- #error "ABL_GRID_POINTS_[XY] is now GRID_MAX_POINTS_[XY]. Please update your configuration."
- #elif defined(ABL_GRID_MAX_POINTS_X) || defined(ABL_GRID_MAX_POINTS_Y)
- #error "ABL_GRID_MAX_POINTS_[XY] is now GRID_MAX_POINTS_[XY]. Please update your configuration."
- #elif defined(MESH_NUM_X_POINTS) || defined(MESH_NUM_Y_POINTS)
- #error "MESH_NUM_[XY]_POINTS is now GRID_MAX_POINTS_[XY]. Please update your configuration."
- #elif defined(UBL_MESH_NUM_X_POINTS) || defined(UBL_MESH_NUM_Y_POINTS)
- #error "UBL_MESH_NUM_[XY]_POINTS is now GRID_MAX_POINTS_[XY]. Please update your configuration."
- #elif defined(UBL_G26_MESH_VALIDATION)
- #error "UBL_G26_MESH_VALIDATION is now G26_MESH_VALIDATION. Please update your configuration."
- #elif defined(UBL_MESH_EDIT_ENABLED)
- #error "UBL_MESH_EDIT_ENABLED is now G26_MESH_VALIDATION. Please update your configuration."
- #elif defined(UBL_MESH_EDITING)
- #error "UBL_MESH_EDITING is now G26_MESH_VALIDATION. Please update your configuration."
- #elif defined(BLTOUCH_HEATERS_OFF)
- #error "BLTOUCH_HEATERS_OFF is now PROBING_HEATERS_OFF. Please update your configuration."
- #elif defined(BLTOUCH_V3)
- #error "BLTOUCH_V3 is obsolete. Please update your configuration."
- #elif defined(BLTOUCH_FORCE_OPEN_DRAIN_MODE)
- #error "BLTOUCH_FORCE_OPEN_DRAIN_MODE is obsolete. Please update your configuration."
- #elif defined(BEEPER)
- #error "BEEPER is now BEEPER_PIN. Please update your pins definitions."
- #elif defined(SDCARDDETECT)
- #error "SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions."
- #elif defined(STAT_LED_RED) || defined(STAT_LED_BLUE)
- #error "STAT_LED_RED/STAT_LED_BLUE are now STAT_LED_RED_PIN/STAT_LED_BLUE_PIN. Please update your pins definitions."
- #elif defined(LCD_PIN_BL)
- #error "LCD_PIN_BL is now LCD_BACKLIGHT_PIN. Please update your pins definitions."
- #elif defined(LCD_PIN_RESET)
- #error "LCD_PIN_RESET is now LCD_RESET_PIN. Please update your pins definitions."
- #elif defined(EXTRUDER_0_AUTO_FAN_PIN) || defined(EXTRUDER_1_AUTO_FAN_PIN) || defined(EXTRUDER_2_AUTO_FAN_PIN) || defined(EXTRUDER_3_AUTO_FAN_PIN)
- #error "EXTRUDER_[0123]_AUTO_FAN_PIN is now E[0123]_AUTO_FAN_PIN. Please update your Configuration_adv.h."
- #elif defined(PID_FAN_SCALING) && FAN_COUNT <= 0
- #error "PID_FAN_SCALING needs at least one fan enabled."
- #elif defined(min_software_endstops) || defined(max_software_endstops)
- #error "(min|max)_software_endstops are now (MIN|MAX)_SOFTWARE_ENDSTOPS. Please update your configuration."
- #elif ENABLED(Z_PROBE_SLED) && defined(SLED_PIN)
- #error "Replace SLED_PIN with SOL1_PIN (applies to both Z_PROBE_SLED and SOLENOID_PROBE)."
- #elif defined(CONTROLLERFAN_PIN)
- #error "CONTROLLERFAN_PIN is now CONTROLLER_FAN_PIN, enabled with USE_CONTROLLER_FAN. Please update your Configuration_adv.h."
- #elif defined(MIN_RETRACT)
- #error "MIN_RETRACT is now MIN_AUTORETRACT and MAX_AUTORETRACT. Please update your Configuration_adv.h."
- #elif defined(ADVANCE)
- #error "ADVANCE was removed in Marlin 1.1.6. Please use LIN_ADVANCE."
- #elif defined(LIN_ADVANCE_E_D_RATIO)
- #error "LIN_ADVANCE (1.5) no longer uses LIN_ADVANCE_E_D_RATIO. Check your configuration."
- #elif defined(NEOPIXEL_RGBW_LED)
- #error "NEOPIXEL_RGBW_LED is now NEOPIXEL_LED. Please update your configuration."
- #elif ENABLED(DELTA) && defined(DELTA_PROBEABLE_RADIUS)
- #error "Remove DELTA_PROBEABLE_RADIUS and use MIN_PROBE_EDGE to inset the probe area instead."
- #elif ENABLED(DELTA) && defined(DELTA_CALIBRATION_RADIUS)
- #error "Remove DELTA_CALIBRATION_RADIUS and use MIN_PROBE_EDGE to inset the probe area instead."
- #elif defined(UBL_MESH_INSET)
- #error "UBL_MESH_INSET is now just MESH_INSET. Please update your configuration."
- #elif defined(UBL_MESH_MIN_X) || defined(UBL_MESH_MIN_Y) || defined(UBL_MESH_MAX_X) || defined(UBL_MESH_MAX_Y)
- #error "UBL_MESH_(MIN|MAX)_[XY] is now just MESH_(MIN|MAX)_[XY]. Please update your configuration."
- #elif defined(ABL_PROBE_PT_1_X) || defined(ABL_PROBE_PT_1_Y) || defined(ABL_PROBE_PT_2_X) || defined(ABL_PROBE_PT_2_Y) || defined(ABL_PROBE_PT_3_X) || defined(ABL_PROBE_PT_3_Y)
- #error "ABL_PROBE_PT_[123]_[XY] is no longer required. Please remove it from Configuration.h."
- #elif defined(UBL_PROBE_PT_1_X) || defined(UBL_PROBE_PT_1_Y) || defined(UBL_PROBE_PT_2_X) || defined(UBL_PROBE_PT_2_Y) || defined(UBL_PROBE_PT_3_X) || defined(UBL_PROBE_PT_3_Y)
- #error "UBL_PROBE_PT_[123]_[XY] is no longer required. Please remove it from Configuration.h."
- #elif defined(LEFT_PROBE_BED_POSITION)
- #error "LEFT_PROBE_BED_POSITION has been replaced by MIN_PROBE_EDGE_LEFT. Please update your configuration."
- #elif defined(RIGHT_PROBE_BED_POSITION)
- #error "RIGHT_PROBE_BED_POSITION has been replaced by MIN_PROBE_EDGE_RIGHT. Please update your configuration."
- #elif defined(FRONT_PROBE_BED_POSITION)
- #error "FRONT_PROBE_BED_POSITION has been replaced by MIN_PROBE_EDGE_FRONT. Please update your configuration."
- #elif defined(BACK_PROBE_BED_POSITION)
- #error "BACK_PROBE_BED_POSITION has been replaced by MIN_PROBE_EDGE_BACK. Please update your configuration."
- #elif defined(ENABLE_MESH_EDIT_GFX_OVERLAY)
- #error "ENABLE_MESH_EDIT_GFX_OVERLAY is now MESH_EDIT_GFX_OVERLAY. Please update your configuration."
- #elif defined(BABYSTEP_ZPROBE_GFX_REVERSE)
- #error "BABYSTEP_ZPROBE_GFX_REVERSE is now set by OVERLAY_GFX_REVERSE. Please update your configurations."
- #elif defined(UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN)
- #error "UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN is now SEGMENT_LEVELED_MOVES. Please update your configuration."
- #elif HAS_PID_HEATING && (defined(K1) || !defined(PID_K1))
- #error "K1 is now PID_K1. Please update your configuration."
- #elif defined(PROBE_DOUBLE_TOUCH)
- #error "PROBE_DOUBLE_TOUCH is now MULTIPLE_PROBING. Please update your configuration."
- #elif defined(ANET_KEYPAD_LCD)
- #error "ANET_KEYPAD_LCD is now ZONESTAR_LCD. Please update your configuration."
- #elif defined(LCD_I2C_SAINSMART_YWROBOT)
- #error "LCD_I2C_SAINSMART_YWROBOT is now LCD_SAINSMART_I2C_(1602|2004). Please update your configuration."
- #elif defined(MEASURED_LOWER_LIMIT) || defined(MEASURED_UPPER_LIMIT)
- #error "MEASURED_(UPPER|LOWER)_LIMIT is now FILWIDTH_ERROR_MARGIN. Please update your configuration."
- #elif defined(HAVE_TMCDRIVER)
- #error "HAVE_TMCDRIVER is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
- #elif defined(STEALTHCHOP)
- #error "STEALTHCHOP is now STEALTHCHOP_(XY|Z|E). Please update your Configuration_adv.h."
- #elif defined(HAVE_TMC26X)
- #error "HAVE_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
- #elif defined(HAVE_TMC2130)
- #error "HAVE_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130. Please update your Configuration.h."
- #elif defined(HAVE_TMC2208)
- #error "HAVE_TMC2208 is now [AXIS]_DRIVER_TYPE TMC2208. Please update your Configuration.h."
- #elif defined(HAVE_L6470DRIVER)
- #error "HAVE_L6470DRIVER is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h."
- #elif defined(X_IS_TMC) || defined(X2_IS_TMC) || defined(Y_IS_TMC) || defined(Y2_IS_TMC) || defined(Z_IS_TMC) || defined(Z2_IS_TMC) || defined(Z3_IS_TMC) \
- || defined(E0_IS_TMC) || defined(E1_IS_TMC) || defined(E2_IS_TMC) || defined(E3_IS_TMC) || defined(E4_IS_TMC) || defined(E5_IS_TMC)
- #error "[AXIS]_IS_TMC is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
- #elif defined(X_IS_TMC26X) || defined(X2_IS_TMC26X) || defined(Y_IS_TMC26X) || defined(Y2_IS_TMC26X) || defined(Z_IS_TMC26X) || defined(Z2_IS_TMC26X) || defined(Z3_IS_TMC26X) \
- || defined(E0_IS_TMC26X) || defined(E1_IS_TMC26X) || defined(E2_IS_TMC26X) || defined(E3_IS_TMC26X) || defined(E4_IS_TMC26X) || defined(E5_IS_TMC26X)
- #error "[AXIS]_IS_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
- #elif defined(X_IS_TMC2130) || defined(X2_IS_TMC2130) || defined(Y_IS_TMC2130) || defined(Y2_IS_TMC2130) || defined(Z_IS_TMC2130) || defined(Z2_IS_TMC2130) || defined(Z3_IS_TMC2130) \
- || defined(E0_IS_TMC2130) || defined(E1_IS_TMC2130) || defined(E2_IS_TMC2130) || defined(E3_IS_TMC2130) || defined(E4_IS_TMC2130) || defined(E5_IS_TMC2130)
- #error "[AXIS]_IS_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130. Please update your Configuration.h."
- #elif defined(X_IS_TMC2208) || defined(X2_IS_TMC2208) || defined(Y_IS_TMC2208) || defined(Y2_IS_TMC2208) || defined(Z_IS_TMC2208) || defined(Z2_IS_TMC2208) || defined(Z3_IS_TMC2208) \
- || defined(E0_IS_TMC2208) || defined(E1_IS_TMC2208) || defined(E2_IS_TMC2208) || defined(E3_IS_TMC2208) || defined(E4_IS_TMC2208) || defined(E5_IS_TMC2208)
- #error "[AXIS]_IS_TMC2208 is now [AXIS]_DRIVER_TYPE TMC2208. Please update your Configuration.h."
- #elif defined(X_IS_L6470) || defined(X2_IS_L6470) || defined(Y_IS_L6470) || defined(Y2_IS_L6470) || defined(Z_IS_L6470) || defined(Z2_IS_L6470) || defined(Z3_IS_L6470) \
- || defined(E0_IS_L6470) || defined(E1_IS_L6470) || defined(E2_IS_L6470) || defined(E3_IS_L6470) || defined(E4_IS_L6470) || defined(E5_IS_L6470)
- #error "[AXIS]_IS_L6470 is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h."
- #elif defined(AUTOMATIC_CURRENT_CONTROL)
- #error "AUTOMATIC_CURRENT_CONTROL is now MONITOR_DRIVER_STATUS. Please update your configuration."
- #elif defined(FILAMENT_CHANGE_LOAD_LENGTH)
- #error "FILAMENT_CHANGE_LOAD_LENGTH is now FILAMENT_CHANGE_FAST_LOAD_LENGTH. Please update your configuration."
- #elif ENABLED(LEVEL_BED_CORNERS) && !defined(LEVEL_CORNERS_INSET)
- #error "LEVEL_BED_CORNERS requires a LEVEL_CORNERS_INSET value. Please update your Configuration.h."
- #elif defined(BEZIER_JERK_CONTROL)
- #error "BEZIER_JERK_CONTROL is now S_CURVE_ACCELERATION. Please update your configuration."
- #elif DISABLED(CLASSIC_JERK) && defined(JUNCTION_DEVIATION_FACTOR)
- #error "JUNCTION_DEVIATION_FACTOR is now JUNCTION_DEVIATION_MM. Please update your configuration."
- #elif defined(JUNCTION_ACCELERATION_FACTOR)
- #error "JUNCTION_ACCELERATION_FACTOR is obsolete. Delete it from Configuration_adv.h."
- #elif defined(JUNCTION_ACCELERATION)
- #error "JUNCTION_ACCELERATION is obsolete. Delete it from Configuration_adv.h."
- #elif defined(MAX7219_DEBUG_STEPPER_HEAD)
- #error "MAX7219_DEBUG_STEPPER_HEAD is now MAX7219_DEBUG_PLANNER_HEAD. Please update your configuration."
- #elif defined(MAX7219_DEBUG_STEPPER_TAIL)
- #error "MAX7219_DEBUG_STEPPER_TAIL is now MAX7219_DEBUG_PLANNER_TAIL. Please update your configuration."
- #elif defined(MAX7219_DEBUG_STEPPER_QUEUE)
- #error "MAX7219_DEBUG_STEPPER_QUEUE is now MAX7219_DEBUG_PLANNER_QUEUE. Please update your configuration."
- #elif defined(ENDSTOP_NOISE_FILTER)
- #error "ENDSTOP_NOISE_FILTER is now ENDSTOP_NOISE_THRESHOLD [2-7]. Please update your configuration."
- #elif defined(RETRACT_ZLIFT)
- #error "RETRACT_ZLIFT is now RETRACT_ZRAISE. Please update your Configuration_adv.h."
- #elif defined(TOOLCHANGE_PARK_ZLIFT) || defined(TOOLCHANGE_UNPARK_ZLIFT)
- #error "TOOLCHANGE_PARK_ZLIFT and TOOLCHANGE_UNPARK_ZLIFT are now TOOLCHANGE_ZRAISE. Please update your configuration."
- #elif defined(SINGLENOZZLE_TOOLCHANGE_ZRAISE)
- #error "SINGLENOZZLE_TOOLCHANGE_ZRAISE is now TOOLCHANGE_ZRAISE. Please update your configuration."
- #elif defined(SINGLENOZZLE_SWAP_LENGTH)
- #error "SINGLENOZZLE_SWAP_LENGTH is now TOOLCHANGE_FIL_SWAP_LENGTH. Please update your configuration."
- #elif defined(SINGLENOZZLE_SWAP_RETRACT_SPEED)
- #error "SINGLENOZZLE_SWAP_RETRACT_SPEED is now TOOLCHANGE_FIL_SWAP_RETRACT_SPEED. Please update your configuration."
- #elif defined(SINGLENOZZLE_SWAP_PRIME_SPEED)
- #error "SINGLENOZZLE_SWAP_PRIME_SPEED is now TOOLCHANGE_FIL_SWAP_PRIME_SPEED. Please update your configuration."
- #elif defined(SINGLENOZZLE_SWAP_PARK)
- #error "SINGLENOZZLE_SWAP_PARK is now TOOLCHANGE_PARK. Please update your configuration."
- #elif defined(SINGLENOZZLE_TOOLCHANGE_XY)
- #error "SINGLENOZZLE_TOOLCHANGE_XY is now TOOLCHANGE_PARK_XY. Please update your configuration."
- #elif defined(SINGLENOZZLE_PARK_XY_FEEDRATE)
- #error "SINGLENOZZLE_PARK_XY_FEEDRATE is now TOOLCHANGE_PARK_XY_FEEDRATE. Please update your configuration."
- #elif defined(PARKING_EXTRUDER_SECURITY_RAISE)
- #error "PARKING_EXTRUDER_SECURITY_RAISE is now TOOLCHANGE_ZRAISE. Please update your configuration."
- #elif defined(SWITCHING_TOOLHEAD_SECURITY_RAISE)
- #error "SWITCHING_TOOLHEAD_SECURITY_RAISE is now TOOLCHANGE_ZRAISE. Please update your configuration."
- #elif defined(G0_FEEDRATE) && G0_FEEDRATE == 0
- #error "G0_FEEDRATE is now used to set the G0 feedrate. Please update your configuration."
- #elif defined(MBL_Z_STEP)
- #error "MBL_Z_STEP is now MESH_EDIT_Z_STEP. Please update your configuration."
- #elif defined(CHDK)
- #error "CHDK is now CHDK_PIN. Please update your Configuration_adv.h."
- #elif defined(MAX6675_SS)
- #error "MAX6675_SS is now MAX6675_SS_PIN. Please update your configuration and/or pins."
- #elif defined(MAX6675_SS2)
- #error "MAX6675_SS2 is now MAX6675_SS2_PIN. Please update your configuration and/or pins."
- #elif defined(SPINDLE_LASER_ENABLE)
- #error "SPINDLE_LASER_ENABLE is now SPINDLE_FEATURE or LASER_FEATURE. Please update your Configuration_adv.h."
- #elif defined(SPINDLE_LASER_ENABLE_PIN)
- #error "SPINDLE_LASER_ENABLE_PIN is now SPINDLE_LASER_ENA_PIN. Please update your Configuration_adv.h and/or pins."
- #elif defined(SPINDLE_DIR_CHANGE)
- #error "SPINDLE_DIR_CHANGE is now SPINDLE_CHANGE_DIR. Please update your Configuration_adv.h."
- #elif defined(SPINDLE_STOP_ON_DIR_CHANGE)
- #error "SPINDLE_STOP_ON_DIR_CHANGE is now SPINDLE_CHANGE_DIR_STOP. Please update your Configuration_adv.h."
- #elif defined(SPINDLE_LASER_ENABLE_INVERT)
- #error "SPINDLE_LASER_ENABLE_INVERT is now SPINDLE_LASER_ACTIVE_HIGH. Please update your Configuration_adv.h."
- #elif defined(CHAMBER_HEATER_PIN)
- #error "CHAMBER_HEATER_PIN is now HEATER_CHAMBER_PIN. Please update your configuration and/or pins."
- #elif defined(TMC_Z_CALIBRATION)
- #error "TMC_Z_CALIBRATION has been deprecated in favor of Z_STEPPER_AUTO_ALIGN. Please update your configuration."
- #elif defined(Z_MIN_PROBE_ENDSTOP)
- #error "Z_MIN_PROBE_ENDSTOP is no longer required. Please remove it from Configuration.h."
- #elif defined(DUAL_NOZZLE_DUPLICATION_MODE)
- #error "DUAL_NOZZLE_DUPLICATION_MODE is now MULTI_NOZZLE_DUPLICATION. Please update your configuration."
- #elif defined(MENU_ITEM_CASE_LIGHT)
- #error "MENU_ITEM_CASE_LIGHT is now CASE_LIGHT_MENU. Please update your configuration."
- #elif defined(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
- #error "ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED is now SD_ABORT_ON_ENDSTOP_HIT. Please update your Configuration_adv.h."
- #elif defined(LPC_SD_LCD) || defined(LPC_SD_ONBOARD) || defined(LPC_SD_CUSTOM_CABLE)
- #error "LPC_SD_(LCD|ONBOARD|CUSTOM_CABLE) are now SDCARD_CONNECTION. Please update your Configuration_adv.h."
- #elif defined(USB_SD_DISABLED)
- #error "USB_SD_DISABLED is now NO_SD_HOST_DRIVE. Please update your Configuration_adv.h."
- #elif defined(USB_SD_ONBOARD)
- #error "USB_SD_ONBOARD is obsolete. Disable NO_SD_HOST_DRIVE instead."
- #elif POWER_SUPPLY == 1
- #error "Replace POWER_SUPPLY 1 by enabling PSU_CONTROL and setting PSU_ACTIVE_HIGH to 'false'."
- #elif POWER_SUPPLY == 2
- #error "Replace POWER_SUPPLY 2 by enabling PSU_CONTROL and setting PSU_ACTIVE_HIGH to 'true'."
- #elif defined(POWER_SUPPLY)
- #error "POWER_SUPPLY is now obsolete. Please remove it from Configuration.h."
- #elif defined(MKS_ROBIN_TFT)
- #error "MKS_ROBIN_TFT is now FSMC_GRAPHICAL_TFT. Please update your configuration."
- #elif defined(SDPOWER)
- #error "SDPOWER is now SDPOWER_PIN. Please update your configuration and/or pins."
- #elif defined(STRING_SPLASH_LINE1) || defined(STRING_SPLASH_LINE2)
- #error "STRING_SPLASH_LINE[12] are now obsolete. Please remove them from Configuration.h."
- #elif defined(Z_PROBE_ALLEN_KEY_DEPLOY_1_X) || defined(Z_PROBE_ALLEN_KEY_STOW_1_X)
- #error "Z_PROBE_ALLEN_KEY_(DEPLOY|STOW) coordinates are now a single setting. Please update your configuration."
- #elif defined(X_PROBE_OFFSET_FROM_EXTRUDER) || defined(Y_PROBE_OFFSET_FROM_EXTRUDER) || defined(Z_PROBE_OFFSET_FROM_EXTRUDER)
- #error "[XYZ]_PROBE_OFFSET_FROM_EXTRUDER is now NOZZLE_TO_PROBE_OFFSET. Please update your configuration."
- #elif defined(MIN_PROBE_X) || defined(MIN_PROBE_Y) || defined(MAX_PROBE_X) || defined(MAX_PROBE_Y)
- #error "(MIN|MAX)_PROBE_[XY] are now calculated at runtime. Please remove them from Configuration.h."
- #elif defined(Z_STEPPER_ALIGN_X) || defined(Z_STEPPER_ALIGN_X)
- #error "Z_STEPPER_ALIGN_X and Z_STEPPER_ALIGN_Y are now combined as Z_STEPPER_ALIGN_XY. Please update your Configuration_adv.h."
- #elif defined(JUNCTION_DEVIATION)
- #error "JUNCTION_DEVIATION is no longer required. (See CLASSIC_JERK). Please remove it from Configuration.h."
- #elif defined(BABYSTEP_MULTIPLICATOR)
- #error "BABYSTEP_MULTIPLICATOR is now BABYSTEP_MULTIPLICATOR_[XY|Z]. Please update Configuration_adv.h."
- #elif defined(LULZBOT_TOUCH_UI)
- #error "LULZBOT_TOUCH_UI is now TOUCH_UI_FTDI_EVE. Please update your configuration."
- #elif defined(PS_DEFAULT_OFF)
- #error "PS_DEFAULT_OFF is now PSU_DEFAULT_OFF. Please update your configuration."
- #elif defined(FILAMENT_UNLOAD_RETRACT_LENGTH)
- #error "FILAMENT_UNLOAD_RETRACT_LENGTH is now FILAMENT_UNLOAD_PURGE_RETRACT. Please update Configuration_adv.h."
- #elif defined(FILAMENT_UNLOAD_DELAY)
- #error "FILAMENT_UNLOAD_DELAY is now FILAMENT_UNLOAD_PURGE_DELAY. Please update Configuration_adv.h."
- #endif
-
- #define BOARD_MKS_13 -1000
- #define BOARD_TRIGORILLA -1001
- #define BOARD_RURAMPS4D -1002
- #define BOARD_FORMBOT_TREX2 -1003
- #define BOARD_BIQU_SKR_V1_1 -1004
- #define BOARD_STM32F1R -1005
- #define BOARD_STM32F103R -1006
- #define BOARD_ESP32 -1007
- #define BOARD_BIGTREE_SKR_MINI_E3 -1008
- #if MB(MKS_13)
- #error "BOARD_MKS_13 has been renamed BOARD_MKS_GEN_13. Please update your configuration."
- #elif MB(TRIGORILLA)
- #error "BOARD_TRIGORILLA has been renamed BOARD_TRIGORILLA_13. Please update your configuration."
- #elif MB(RURAMPS4D)
- #error "BOARD_RURAMPS4D has been renamed BOARD_RURAMPS4D_11. Please update your configuration."
- #elif MB(FORMBOT_TREX2)
- #error "FORMBOT_TREX2 has been renamed BOARD_FORMBOT_TREX2PLUS. Please update your configuration."
- #elif MB(BIQU_SKR_V1_1)
- #error "BOARD_BIQU_SKR_V1_1 has been renamed BOARD_BIGTREE_SKR_V1_1. Please update your configuration."
- #elif MB(STM32F1R)
- #error "BOARD_STM32F1R has been renamed BOARD_STM32F103RE. Please update your configuration."
- #elif MB(STM32F103R)
- #error "BOARD_STM32F103R has been renamed BOARD_STM32F103RE. Please update your configuration."
- #elif MOTHERBOARD == BOARD_ESP32
- #error "BOARD_ESP32 has been renamed BOARD_ESPRESSIF_ESP32. Please update your configuration."
- #elif MOTHERBOARD == BOARD_BIGTREE_SKR_MINI_E3
- #error "BOARD_BIGTREE_SKR_MINI_E3 has been renamed BOARD_BTT_SKR_MINI_E3_V1_0. Please update your configuration."
- #endif
- #undef BOARD_MKS_13
- #undef BOARD_TRIGORILLA
- #undef BOARD_RURAMPS4D
- #undef BOARD_FORMBOT_TREX2
- #undef BOARD_BIQU_SKR_V1_1
- #undef BOARD_STM32F1R
- #undef BOARD_STM32F103R
- #undef BOARD_ESP32
- #undef BOARD_BIGTREE_SKR_MINI_E3
-
- /**
- * Marlin release, version and default string
- */
- #ifndef SHORT_BUILD_VERSION
- #error "SHORT_BUILD_VERSION must be specified."
- #elif !defined(DETAILED_BUILD_VERSION)
- #error "BUILD_VERSION must be specified."
- #elif !defined(STRING_DISTRIBUTION_DATE)
- #error "STRING_DISTRIBUTION_DATE must be specified."
- #elif !defined(PROTOCOL_VERSION)
- #error "PROTOCOL_VERSION must be specified."
- #elif !defined(MACHINE_NAME)
- #error "MACHINE_NAME must be specified."
- #elif !defined(SOURCE_CODE_URL)
- #error "SOURCE_CODE_URL must be specified."
- #elif !defined(DEFAULT_MACHINE_UUID)
- #error "DEFAULT_MACHINE_UUID must be specified."
- #elif !defined(WEBSITE_URL)
- #error "WEBSITE_URL must be specified."
- #endif
-
- /**
- * Serial
- */
- #if !(defined(__AVR__) && defined(USBCON))
- #if ENABLED(SERIAL_XON_XOFF) && RX_BUFFER_SIZE < 1024
- #error "SERIAL_XON_XOFF requires RX_BUFFER_SIZE >= 1024 for reliable transfers without drops."
- #elif RX_BUFFER_SIZE && (RX_BUFFER_SIZE < 2 || !IS_POWER_OF_2(RX_BUFFER_SIZE))
- #error "RX_BUFFER_SIZE must be a power of 2 greater than 1."
- #elif TX_BUFFER_SIZE && (TX_BUFFER_SIZE < 2 || TX_BUFFER_SIZE > 256 || !IS_POWER_OF_2(TX_BUFFER_SIZE))
- #error "TX_BUFFER_SIZE must be 0 or a power of 2 between 1 and 256."
- #endif
- #elif ANY(SERIAL_XON_XOFF, SERIAL_STATS_MAX_RX_QUEUED, SERIAL_STATS_DROPPED_RX)
- #error "SERIAL_XON_XOFF and SERIAL_STATS_* features not supported on USB-native AVR devices."
- #endif
-
- #if SERIAL_PORT > 7
- #error "Set SERIAL_PORT to the port on your board. Usually this is 0."
- #endif
-
- #if defined(SERIAL_PORT_2) && NUM_SERIAL < 2
- #error "SERIAL_PORT_2 is not supported for your MOTHERBOARD. Disable it to continue."
- #endif
-
- /**
- * Dual / Triple Stepper Drivers
- */
- #if BOTH(X_DUAL_STEPPER_DRIVERS, DUAL_X_CARRIAGE)
- #error "DUAL_X_CARRIAGE is not compatible with X_DUAL_STEPPER_DRIVERS."
- #elif ENABLED(X_DUAL_STEPPER_DRIVERS) && !(HAS_X2_ENABLE && HAS_X2_STEP && HAS_X2_DIR)
- #error "X_DUAL_STEPPER_DRIVERS requires X2 pins (and an extra E plug)."
- #elif ENABLED(Y_DUAL_STEPPER_DRIVERS) && !(HAS_Y2_ENABLE && HAS_Y2_STEP && HAS_Y2_DIR)
- #error "Y_DUAL_STEPPER_DRIVERS requires Y2 pins (and an extra E plug)."
- #elif ENABLED(Z_DUAL_STEPPER_DRIVERS)
- #if ENABLED(Z_TRIPLE_STEPPER_DRIVERS)
- #error "Please select either Z_TRIPLE_STEPPER_DRIVERS or Z_DUAL_STEPPER_DRIVERS, not both."
- #elif !(HAS_Z2_ENABLE && HAS_Z2_STEP && HAS_Z2_DIR)
- #error "Z_DUAL_STEPPER_DRIVERS requires Z2 pins (and an extra E plug)."
- #endif
- #elif ENABLED(Z_TRIPLE_STEPPER_DRIVERS) && !(HAS_Z2_ENABLE && HAS_Z2_STEP && HAS_Z2_DIR && HAS_Z3_ENABLE && HAS_Z3_STEP && HAS_Z3_DIR)
- #error "Z_TRIPLE_STEPPER_DRIVERS requires Z3 pins (and two extra E plugs)."
- #endif
-
- /**
- * Validate that the bed size fits
- */
- static_assert(X_MAX_LENGTH >= X_BED_SIZE, "Movement bounds (X_MIN_POS, X_MAX_POS) are too narrow to contain X_BED_SIZE.");
- static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS) are too narrow to contain Y_BED_SIZE.");
-
- /**
- * Granular software endstops (Marlin >= 1.1.7)
- */
- #if ENABLED(MIN_SOFTWARE_ENDSTOPS) && DISABLED(MIN_SOFTWARE_ENDSTOP_Z)
- #if IS_KINEMATIC
- #error "MIN_SOFTWARE_ENDSTOPS on DELTA/SCARA also requires MIN_SOFTWARE_ENDSTOP_Z."
- #elif NONE(MIN_SOFTWARE_ENDSTOP_X, MIN_SOFTWARE_ENDSTOP_Y)
- #error "MIN_SOFTWARE_ENDSTOPS requires at least one of the MIN_SOFTWARE_ENDSTOP_[XYZ] options."
- #endif
- #endif
-
- #if ENABLED(MAX_SOFTWARE_ENDSTOPS) && DISABLED(MAX_SOFTWARE_ENDSTOP_Z)
- #if IS_KINEMATIC
- #error "MAX_SOFTWARE_ENDSTOPS on DELTA/SCARA also requires MAX_SOFTWARE_ENDSTOP_Z."
- #elif NONE(MAX_SOFTWARE_ENDSTOP_X, MAX_SOFTWARE_ENDSTOP_Y)
- #error "MAX_SOFTWARE_ENDSTOPS requires at least one of the MAX_SOFTWARE_ENDSTOP_[XYZ] options."
- #endif
- #endif
-
- #if !defined(TARGET_LPC1768) && ANY( \
- ENDSTOPPULLDOWNS, \
- ENDSTOPPULLDOWN_XMAX, ENDSTOPPULLDOWN_YMAX, \
- ENDSTOPPULLDOWN_ZMAX, ENDSTOPPULLDOWN_XMIN, \
- ENDSTOPPULLDOWN_YMIN, ENDSTOPPULLDOWN_ZMIN \
- )
- #error "PULLDOWN pin mode is not available on the selected board."
- #endif
-
- #if BOTH(ENDSTOPPULLUPS, ENDSTOPPULLDOWNS)
- #error "Enable only one of ENDSTOPPULLUPS or ENDSTOPPULLDOWNS."
- #elif BOTH(FIL_RUNOUT_PULLUP, FIL_RUNOUT_PULLDOWN)
- #error "Enable only one of FIL_RUNOUT_PULLUP or FIL_RUNOUT_PULLDOWN."
- #elif BOTH(ENDSTOPPULLUP_XMAX, ENDSTOPPULLDOWN_XMAX)
- #error "Enable only one of ENDSTOPPULLUP_X_MAX or ENDSTOPPULLDOWN_X_MAX."
- #elif BOTH(ENDSTOPPULLUP_YMAX, ENDSTOPPULLDOWN_YMAX)
- #error "Enable only one of ENDSTOPPULLUP_Y_MAX or ENDSTOPPULLDOWN_Y_MAX."
- #elif BOTH(ENDSTOPPULLUP_ZMAX, ENDSTOPPULLDOWN_ZMAX)
- #error "Enable only one of ENDSTOPPULLUP_Z_MAX or ENDSTOPPULLDOWN_Z_MAX."
- #elif BOTH(ENDSTOPPULLUP_XMIN, ENDSTOPPULLDOWN_XMIN)
- #error "Enable only one of ENDSTOPPULLUP_X_MIN or ENDSTOPPULLDOWN_X_MIN."
- #elif BOTH(ENDSTOPPULLUP_YMIN, ENDSTOPPULLDOWN_YMIN)
- #error "Enable only one of ENDSTOPPULLUP_Y_MIN or ENDSTOPPULLDOWN_Y_MIN."
- #elif BOTH(ENDSTOPPULLUP_ZMIN, ENDSTOPPULLDOWN_ZMIN)
- #error "Enable only one of ENDSTOPPULLUP_Z_MIN or ENDSTOPPULLDOWN_Z_MIN."
- #endif
-
- /**
- * LCD Info Screen Style
- */
- #if LCD_INFO_SCREEN_STYLE > 0
- #if HAS_GRAPHICAL_LCD || LCD_WIDTH < 20 || LCD_HEIGHT < 4
- #error "Alternative LCD_INFO_SCREEN_STYLE requires 20x4 Character LCD."
- #elif LCD_INFO_SCREEN_STYLE > 1
- #error "LCD_INFO_SCREEN_STYLE only has options 0 and 1 at this time."
- #endif
- #endif
-
- /**
- * Progress Bar
- */
- #if ENABLED(LCD_PROGRESS_BAR)
- #if NONE(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
- #error "LCD_PROGRESS_BAR requires SDSUPPORT or LCD_SET_PROGRESS_MANUALLY."
- #elif !HAS_CHARACTER_LCD
- #error "LCD_PROGRESS_BAR requires a character LCD."
- #elif HAS_GRAPHICAL_LCD
- #error "LCD_PROGRESS_BAR does not apply to graphical displays."
- #elif ENABLED(FILAMENT_LCD_DISPLAY)
- #error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both."
- #elif PROGRESS_MSG_EXPIRE < 0
- #error "PROGRESS_MSG_EXPIRE must be greater than or equal to 0."
- #endif
- #elif ENABLED(LCD_SET_PROGRESS_MANUALLY) && !HAS_GRAPHICAL_LCD && DISABLED(EXTENSIBLE_UI)
- #error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR, Graphical LCD, or EXTENSIBLE_UI."
- #endif
-
- #if !HAS_LCD_MENU && ENABLED(SD_REPRINT_LAST_SELECTED_FILE)
- #error "SD_REPRINT_LAST_SELECTED_FILE currently requires a Marlin-native LCD menu."
- #endif
-
- /**
- * Custom Boot and Status screens
- */
- #if ENABLED(SHOW_CUSTOM_BOOTSCREEN) && !(HAS_GRAPHICAL_LCD || ENABLED(TOUCH_UI_FTDI_EVE))
- #error "SHOW_CUSTOM_BOOTSCREEN requires Graphical LCD or TOUCH_UI_FTDI_EVE."
- #elif ENABLED(CUSTOM_STATUS_SCREEN_IMAGE) && !HAS_GRAPHICAL_LCD
- #error "CUSTOM_STATUS_SCREEN_IMAGE requires a Graphical LCD."
- #endif
-
- /**
- * LCD Lightweight Screen Style
- */
- #if ENABLED(LIGHTWEIGHT_UI) && DISABLED(U8GLIB_ST7920)
- #error "LIGHTWEIGHT_UI requires a U8GLIB_ST7920-based display."
- #endif
-
- /**
- * SD File Sorting
- */
- #if ENABLED(SDCARD_SORT_ALPHA)
- #if SDSORT_LIMIT > 256
- #error "SDSORT_LIMIT must be 256 or smaller."
- #elif SDSORT_LIMIT < 10
- #error "SDSORT_LIMIT should be greater than 9 to be useful."
- #elif DISABLED(SDSORT_USES_RAM)
- #if ENABLED(SDSORT_DYNAMIC_RAM)
- #error "SDSORT_DYNAMIC_RAM requires SDSORT_USES_RAM (which reads the directory into RAM)."
- #elif ENABLED(SDSORT_CACHE_NAMES)
- #error "SDSORT_CACHE_NAMES requires SDSORT_USES_RAM (which reads the directory into RAM)."
- #endif
- #endif
-
- #if ENABLED(SDSORT_CACHE_NAMES) && DISABLED(SDSORT_DYNAMIC_RAM)
- #if SDSORT_CACHE_VFATS < 2
- #error "SDSORT_CACHE_VFATS must be 2 or greater!"
- #elif SDSORT_CACHE_VFATS > MAX_VFAT_ENTRIES
- #undef SDSORT_CACHE_VFATS
- #define SDSORT_CACHE_VFATS MAX_VFAT_ENTRIES
- #warning "SDSORT_CACHE_VFATS was reduced to MAX_VFAT_ENTRIES!"
- #endif
- #endif
- #endif
-
- #if defined(EVENT_GCODE_SD_STOP) && DISABLED(NOZZLE_PARK_FEATURE)
- static_assert(nullptr == strstr(EVENT_GCODE_SD_STOP, "G27"), "NOZZLE_PARK_FEATURE is required to use G27 in EVENT_GCODE_SD_STOP.");
- #endif
-
- /**
- * I2C Position Encoders
- */
- #if ENABLED(I2C_POSITION_ENCODERS)
- #if !BOTH(BABYSTEPPING, BABYSTEP_XY)
- #error "I2C_POSITION_ENCODERS requires BABYSTEPPING and BABYSTEP_XY."
- #elif !WITHIN(I2CPE_ENCODER_CNT, 1, 5)
- #error "I2CPE_ENCODER_CNT must be between 1 and 5."
- #endif
- #endif
-
- /**
- * Babystepping
- */
- #if ENABLED(BABYSTEPPING)
- #if ENABLED(SCARA)
- #error "BABYSTEPPING is not implemented for SCARA yet."
- #elif BOTH(DELTA, BABYSTEP_XY)
- #error "BABYSTEPPING only implemented for Z axis on deltabots."
- #elif BOTH(BABYSTEP_ZPROBE_OFFSET, MESH_BED_LEVELING)
- #error "MESH_BED_LEVELING and BABYSTEP_ZPROBE_OFFSET is not a valid combination"
- #elif ENABLED(BABYSTEP_ZPROBE_OFFSET) && !HAS_BED_PROBE
- #error "BABYSTEP_ZPROBE_OFFSET requires a probe."
- #elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && !HAS_GRAPHICAL_LCD
- #error "BABYSTEP_ZPROBE_GFX_OVERLAY requires a Graphical LCD."
- #elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && DISABLED(BABYSTEP_ZPROBE_OFFSET)
- #error "BABYSTEP_ZPROBE_GFX_OVERLAY requires a BABYSTEP_ZPROBE_OFFSET."
- #elif ENABLED(BABYSTEP_HOTEND_Z_OFFSET) && !HAS_HOTEND_OFFSET
- #error "BABYSTEP_HOTEND_Z_OFFSET requires 2 or more HOTENDS."
- #elif BOTH(BABYSTEP_ALWAYS_AVAILABLE, MOVE_Z_WHEN_IDLE)
- #error "BABYSTEP_ALWAYS_AVAILABLE and MOVE_Z_WHEN_IDLE are incompatible."
- #endif
- #endif
-
- /**
- * Filament Runout needs one or more pins and either SD Support or Auto print start detection
- */
- #if HAS_FILAMENT_SENSOR
- #if !PIN_EXISTS(FIL_RUNOUT)
- #error "FILAMENT_RUNOUT_SENSOR requires FIL_RUNOUT_PIN."
- #elif NUM_RUNOUT_SENSORS > E_STEPPERS
- #error "NUM_RUNOUT_SENSORS cannot exceed the number of E steppers."
- #elif NUM_RUNOUT_SENSORS > 1 && !PIN_EXISTS(FIL_RUNOUT2)
- #error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 1 requires FIL_RUNOUT2_PIN."
- #elif NUM_RUNOUT_SENSORS > 2 && !PIN_EXISTS(FIL_RUNOUT3)
- #error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 2 requires FIL_RUNOUT3_PIN."
- #elif NUM_RUNOUT_SENSORS > 3 && !PIN_EXISTS(FIL_RUNOUT4)
- #error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 3 requires FIL_RUNOUT4_PIN."
- #elif NUM_RUNOUT_SENSORS > 4 && !PIN_EXISTS(FIL_RUNOUT5)
- #error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 4 requires FIL_RUNOUT5_PIN."
- #elif NUM_RUNOUT_SENSORS > 5 && !PIN_EXISTS(FIL_RUNOUT6)
- #error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 5 requires FIL_RUNOUT6_PIN."
- #elif NONE(SDSUPPORT, PRINTJOB_TIMER_AUTOSTART)
- #error "FILAMENT_RUNOUT_SENSOR requires SDSUPPORT or PRINTJOB_TIMER_AUTOSTART."
- #elif FILAMENT_RUNOUT_DISTANCE_MM < 0
- #error "FILAMENT_RUNOUT_DISTANCE_MM must be greater than or equal to zero."
- #elif DISABLED(ADVANCED_PAUSE_FEATURE)
- static_assert(nullptr == strstr(FILAMENT_RUNOUT_SCRIPT, "M600"), "ADVANCED_PAUSE_FEATURE is required to use M600 with FILAMENT_RUNOUT_SENSOR.");
- #endif
- #endif
-
- /**
- * Advanced Pause
- */
- #if ENABLED(ADVANCED_PAUSE_FEATURE)
- #if !HAS_RESUME_CONTINUE
- #error "ADVANCED_PAUSE_FEATURE currently requires an LCD controller or EMERGENCY_PARSER."
- #elif ENABLED(EXTRUDER_RUNOUT_PREVENT)
- #error "EXTRUDER_RUNOUT_PREVENT is incompatible with ADVANCED_PAUSE_FEATURE."
- #elif ENABLED(PARK_HEAD_ON_PAUSE) && NONE(SDSUPPORT, NEWPANEL, EMERGENCY_PARSER)
- #error "PARK_HEAD_ON_PAUSE requires SDSUPPORT, EMERGENCY_PARSER, or an LCD controller."
- #elif ENABLED(HOME_BEFORE_FILAMENT_CHANGE) && DISABLED(PAUSE_PARK_NO_STEPPER_TIMEOUT)
- #error "HOME_BEFORE_FILAMENT_CHANGE requires PAUSE_PARK_NO_STEPPER_TIMEOUT."
- #elif DISABLED(NOZZLE_PARK_FEATURE)
- #error "ADVANCED_PAUSE_FEATURE requires NOZZLE_PARK_FEATURE."
- #elif ENABLED(PREVENT_LENGTHY_EXTRUDE) && FILAMENT_CHANGE_UNLOAD_LENGTH > EXTRUDE_MAXLENGTH
- #error "FILAMENT_CHANGE_UNLOAD_LENGTH must be less than or equal to EXTRUDE_MAXLENGTH."
- #elif ENABLED(PREVENT_LENGTHY_EXTRUDE) && FILAMENT_CHANGE_SLOW_LOAD_LENGTH > EXTRUDE_MAXLENGTH
- #error "FILAMENT_CHANGE_SLOW_LOAD_LENGTH must be less than or equal to EXTRUDE_MAXLENGTH."
- #elif ENABLED(PREVENT_LENGTHY_EXTRUDE) && FILAMENT_CHANGE_FAST_LOAD_LENGTH > EXTRUDE_MAXLENGTH
- #error "FILAMENT_CHANGE_FAST_LOAD_LENGTH must be less than or equal to EXTRUDE_MAXLENGTH."
- #endif
- #endif
-
- #if ENABLED(NOZZLE_PARK_FEATURE)
- constexpr float npp[] = NOZZLE_PARK_POINT;
- static_assert(COUNT(npp) == XYZ, "NOZZLE_PARK_POINT requires X, Y, and Z values.");
- #endif
-
- /**
- * Individual axis homing is useless for DELTAS
- */
- #if BOTH(INDIVIDUAL_AXIS_HOMING_MENU, DELTA)
- #error "INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics."
- #endif
-
- /**
- * Options only for EXTRUDERS > 1
- */
- #if EXTRUDERS > 1
-
- #if EXTRUDERS > 6
- #error "Marlin supports a maximum of 6 EXTRUDERS."
- #endif
-
- #if ENABLED(HEATERS_PARALLEL)
- #error "EXTRUDERS must be 1 with HEATERS_PARALLEL."
- #endif
-
- #if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
- #ifndef TOOLCHANGE_FIL_SWAP_LENGTH
- #error "TOOLCHANGE_FILAMENT_SWAP requires TOOLCHANGE_FIL_SWAP_LENGTH. Please update your Configuration."
- #elif !defined(TOOLCHANGE_FIL_SWAP_RETRACT_SPEED)
- #error "TOOLCHANGE_FILAMENT_SWAP requires TOOLCHANGE_FIL_SWAP_RETRACT_SPEED. Please update your Configuration."
- #elif !defined(TOOLCHANGE_FIL_SWAP_PRIME_SPEED)
- #error "TOOLCHANGE_FILAMENT_SWAP requires TOOLCHANGE_FIL_SWAP_PRIME_SPEED. Please update your Configuration."
- #endif
- #endif
- #if ENABLED(TOOLCHANGE_PARK)
- #ifndef TOOLCHANGE_PARK_XY
- #error "TOOLCHANGE_PARK requires TOOLCHANGE_PARK_XY. Please update your Configuration."
- #elif !defined(TOOLCHANGE_PARK_XY_FEEDRATE)
- #error "TOOLCHANGE_PARK requires TOOLCHANGE_PARK_XY_FEEDRATE. Please update your Configuration."
- #endif
- #endif
-
- #ifndef TOOLCHANGE_ZRAISE
- #error "TOOLCHANGE_ZRAISE required for EXTRUDERS > 1. Please update your Configuration_adv.h."
- #endif
-
- #elif ENABLED(MK2_MULTIPLEXER)
- #error "MK2_MULTIPLEXER requires 2 or more EXTRUDERS."
- #elif ENABLED(SINGLENOZZLE)
- #error "SINGLENOZZLE requires 2 or more EXTRUDERS."
- #endif
-
- /**
- * Sanity checking for the Průša MK2 Multiplexer
- */
- #ifdef SNMM
- #error "SNMM is now MK2_MULTIPLEXER. Please update your configuration."
- #endif
-
- /**
- * A Dual Nozzle carriage with switching servo
- */
- #if ENABLED(SWITCHING_NOZZLE)
- #if ENABLED(DUAL_X_CARRIAGE)
- #error "SWITCHING_NOZZLE and DUAL_X_CARRIAGE are incompatible."
- #elif ENABLED(SINGLENOZZLE)
- #error "SWITCHING_NOZZLE and SINGLENOZZLE are incompatible."
- #elif EXTRUDERS != 2
- #error "SWITCHING_NOZZLE requires exactly 2 EXTRUDERS."
- #elif NUM_SERVOS < 1
- #error "SWITCHING_NOZZLE requires NUM_SERVOS >= 1."
- #endif
-
- #ifndef SWITCHING_NOZZLE_SERVO_NR
- #error "SWITCHING_NOZZLE requires SWITCHING_NOZZLE_SERVO_NR."
- #elif SWITCHING_NOZZLE_SERVO_NR == 0 && !PIN_EXISTS(SERVO0)
- #error "SERVO0_PIN must be defined for your SWITCHING_NOZZLE."
- #elif SWITCHING_NOZZLE_SERVO_NR == 1 && !PIN_EXISTS(SERVO1)
- #error "SERVO1_PIN must be defined for your SWITCHING_NOZZLE."
- #elif SWITCHING_NOZZLE_SERVO_NR == 2 && !PIN_EXISTS(SERVO2)
- #error "SERVO2_PIN must be defined for your SWITCHING_NOZZLE."
- #elif SWITCHING_NOZZLE_SERVO_NR == 3 && !PIN_EXISTS(SERVO3)
- #error "SERVO3_PIN must be defined for your SWITCHING_NOZZLE."
- #endif
-
- #ifdef SWITCHING_NOZZLE_E1_SERVO_NR
- #if SWITCHING_NOZZLE_E1_SERVO_NR == SWITCHING_NOZZLE_SERVO_NR
- #error "SWITCHING_NOZZLE_E1_SERVO_NR must be different from SWITCHING_NOZZLE_SERVO_NR."
- #elif SWITCHING_NOZZLE_E1_SERVO_NR == 0 && !PIN_EXISTS(SERVO0)
- #error "SERVO0_PIN must be defined for your SWITCHING_NOZZLE."
- #elif SWITCHING_NOZZLE_E1_SERVO_NR == 1 && !PIN_EXISTS(SERVO1)
- #error "SERVO1_PIN must be defined for your SWITCHING_NOZZLE."
- #elif SWITCHING_NOZZLE_E1_SERVO_NR == 2 && !PIN_EXISTS(SERVO2)
- #error "SERVO2_PIN must be defined for your SWITCHING_NOZZLE."
- #elif SWITCHING_NOZZLE_E1_SERVO_NR == 3 && !PIN_EXISTS(SERVO3)
- #error "SERVO3_PIN must be defined for your SWITCHING_NOZZLE."
- #endif
- #endif
- #endif
-
- /**
- * Single Stepper Dual Extruder with switching servo
- */
- #if ENABLED(SWITCHING_EXTRUDER)
- #if NUM_SERVOS < 1
- #error "SWITCHING_EXTRUDER requires NUM_SERVOS >= 1."
- #elif SWITCHING_EXTRUDER_SERVO_NR == 0 && !PIN_EXISTS(SERVO0)
- #error "SERVO0_PIN must be defined for your SWITCHING_EXTRUDER."
- #elif SWITCHING_EXTRUDER_SERVO_NR == 1 && !PIN_EXISTS(SERVO1)
- #error "SERVO1_PIN must be defined for your SWITCHING_EXTRUDER."
- #elif SWITCHING_EXTRUDER_SERVO_NR == 2 && !PIN_EXISTS(SERVO2)
- #error "SERVO2_PIN must be defined for your SWITCHING_EXTRUDER."
- #elif SWITCHING_EXTRUDER_SERVO_NR == 3 && !PIN_EXISTS(SERVO3)
- #error "SERVO3_PIN must be defined for your SWITCHING_EXTRUDER."
- #endif
- #if EXTRUDERS > 3
- #if NUM_SERVOS < 2
- #error "SWITCHING_EXTRUDER with 4 extruders requires NUM_SERVOS >= 2."
- #elif SWITCHING_EXTRUDER_E23_SERVO_NR == 0 && !PIN_EXISTS(SERVO0)
- #error "SERVO0_PIN must be defined for your SWITCHING_EXTRUDER."
- #elif SWITCHING_EXTRUDER_E23_SERVO_NR == 1 && !PIN_EXISTS(SERVO1)
- #error "SERVO1_PIN must be defined for your SWITCHING_EXTRUDER."
- #elif SWITCHING_EXTRUDER_E23_SERVO_NR == 2 && !PIN_EXISTS(SERVO2)
- #error "SERVO2_PIN must be defined for your SWITCHING_EXTRUDER."
- #elif SWITCHING_EXTRUDER_E23_SERVO_NR == 3 && !PIN_EXISTS(SERVO3)
- #error "SERVO3_PIN must be defined for your SWITCHING_EXTRUDER."
- #elif SWITCHING_EXTRUDER_E23_SERVO_NR == SWITCHING_EXTRUDER_SERVO_NR
- #error "SWITCHING_EXTRUDER_E23_SERVO_NR should be a different extruder from SWITCHING_EXTRUDER_SERVO_NR."
- #endif
- #endif
- #endif
-
- /**
- * Mixing Extruder requirements
- */
- #if ENABLED(MIXING_EXTRUDER)
- #if EXTRUDERS > 1
- #error "For MIXING_EXTRUDER set MIXING_STEPPERS > 1 instead of EXTRUDERS > 1."
- #elif MIXING_STEPPERS < 2
- #error "You must set MIXING_STEPPERS >= 2 for a mixing extruder."
- #elif ENABLED(FILAMENT_SENSOR)
- #error "MIXING_EXTRUDER is incompatible with FILAMENT_SENSOR. Comment out this line to use it anyway."
- #elif ENABLED(SWITCHING_EXTRUDER)
- #error "Please select either MIXING_EXTRUDER or SWITCHING_EXTRUDER, not both."
- #elif ENABLED(SINGLENOZZLE)
- #error "MIXING_EXTRUDER is incompatible with SINGLENOZZLE."
- #endif
- #endif
-
- /**
- * Linear Advance 1.5 - Check K value range
- */
- #if ENABLED(LIN_ADVANCE)
- static_assert(
- WITHIN(LIN_ADVANCE_K, 0, 10),
- "LIN_ADVANCE_K must be a value from 0 to 10 (Changed in LIN_ADVANCE v1.5, Marlin 1.1.9)."
- );
- #endif
-
- /**
- * Special tool-changing options
- */
- #if 1 < 0 \
- + ENABLED(SINGLENOZZLE) \
- + ENABLED(DUAL_X_CARRIAGE) \
- + ENABLED(PARKING_EXTRUDER) \
- + ENABLED(MAGNETIC_PARKING_EXTRUDER) \
- + ENABLED(SWITCHING_TOOLHEAD) \
- + ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) \
- + ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
- #error "Please select only one of SINGLENOZZLE, DUAL_X_CARRIAGE, PARKING_EXTRUDER, SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, or ELECTROMAGNETIC_SWITCHING_TOOLHEAD."
- #endif
-
- /**
- * (Magnetic) Parking Extruder requirements
- */
- #if ANY(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
- #if ENABLED(EXT_SOLENOID)
- #error "(MAGNETIC_)PARKING_EXTRUDER and EXT_SOLENOID are incompatible. (Pins are used twice.)"
- #elif EXTRUDERS != 2
- #error "(MAGNETIC_)PARKING_EXTRUDER requires exactly 2 EXTRUDERS."
- #elif !defined(PARKING_EXTRUDER_PARKING_X)
- #error "(MAGNETIC_)PARKING_EXTRUDER requires PARKING_EXTRUDER_PARKING_X."
- #elif !defined(TOOLCHANGE_ZRAISE)
- #error "(MAGNETIC_)PARKING_EXTRUDER requires TOOLCHANGE_ZRAISE."
- #elif TOOLCHANGE_ZRAISE < 0
- #error "TOOLCHANGE_ZRAISE must be 0 or higher."
- #elif ENABLED(PARKING_EXTRUDER)
- #if !PIN_EXISTS(SOL0, SOL1)
- #error "PARKING_EXTRUDER requires SOL0_PIN and SOL1_PIN."
- #elif !defined(PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE) || !WITHIN(PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE, LOW, HIGH)
- #error "PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE must be defined as HIGH or LOW."
- #elif !defined(PARKING_EXTRUDER_SOLENOIDS_DELAY) || !WITHIN(PARKING_EXTRUDER_SOLENOIDS_DELAY, 0, 2000)
- #error "PARKING_EXTRUDER_SOLENOIDS_DELAY must be between 0 and 2000 (ms)."
- #endif
- #endif
- #endif
-
- /**
- * Switching Toolhead requirements
- */
- #if ENABLED(SWITCHING_TOOLHEAD)
- #ifndef SWITCHING_TOOLHEAD_SERVO_NR
- #error "SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_SERVO_NR."
- #elif EXTRUDERS < 2
- #error "SWITCHING_TOOLHEAD requires at least 2 EXTRUDERS."
- #elif NUM_SERVOS < (SWITCHING_TOOLHEAD_SERVO_NR - 1)
- #if SWITCHING_TOOLHEAD_SERVO_NR == 0
- #error "A SWITCHING_TOOLHEAD_SERVO_NR of 0 requires NUM_SERVOS >= 1."
- #elif SWITCHING_TOOLHEAD_SERVO_NR == 1
- #error "A SWITCHING_TOOLHEAD_SERVO_NR of 1 requires NUM_SERVOS >= 2."
- #elif SWITCHING_TOOLHEAD_SERVO_NR == 2
- #error "A SWITCHING_TOOLHEAD_SERVO_NR of 2 requires NUM_SERVOS >= 3."
- #elif SWITCHING_TOOLHEAD_SERVO_NR == 3
- #error "A SWITCHING_TOOLHEAD_SERVO_NR of 3 requires NUM_SERVOS >= 4."
- #endif
- #elif !defined(TOOLCHANGE_ZRAISE)
- #error "SWITCHING_TOOLHEAD requires TOOLCHANGE_ZRAISE."
- #elif TOOLCHANGE_ZRAISE < 0
- #error "TOOLCHANGE_ZRAISE must be 0 or higher."
- #endif
- #endif
-
- /**
- * (Electro)magnetic Switching Toolhead requirements
- */
- #if EITHER(MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
- #ifndef SWITCHING_TOOLHEAD_Y_POS
- #error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_Y_POS"
- #elif !defined(SWITCHING_TOOLHEAD_X_POS)
- #error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_X_POS"
- #elif !defined(SWITCHING_TOOLHEAD_Z_HOP)
- #error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_Z_HOP."
- #elif !defined(SWITCHING_TOOLHEAD_Y_CLEAR)
- #error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_Y_CLEAR."
- #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
- #if ENABLED(EXT_SOLENOID)
- #error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD and EXT_SOLENOID are incompatible. (Pins are used twice.)"
- #elif !PIN_EXISTS(SOL0)
- #error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SOL0_PIN."
- #endif
- #endif
- #endif
-
- /**
- * Part-Cooling Fan Multiplexer requirements
- */
- #if PIN_EXISTS(FANMUX1)
- #if !HAS_FANMUX
- #error "FANMUX0_PIN must be set before FANMUX1_PIN can be set."
- #endif
- #elif PIN_EXISTS(FANMUX2)
- #error "FANMUX0_PIN and FANMUX1_PIN must be set before FANMUX2_PIN can be set."
- #endif
-
- /**
- * Limited number of servos
- */
- #if NUM_SERVOS > NUM_SERVO_PLUGS
- #error "The selected board doesn't support enough servos for your configuration. Reduce NUM_SERVOS."
- #endif
-
- /**
- * Servo deactivation depends on servo endstops, switching nozzle, or switching extruder
- */
- #if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) && !HAS_Z_SERVO_PROBE && !defined(SWITCHING_NOZZLE_SERVO_NR) && !defined(SWITCHING_EXTRUDER_SERVO_NR) && !defined(SWITCHING_TOOLHEAD_SERVO_NR)
- #error "Z_PROBE_SERVO_NR, switching nozzle, switching toolhead or switching extruder is required for DEACTIVATE_SERVOS_AFTER_MOVE."
- #endif
-
- /**
- * Required LCD language
- */
- #if HAS_CHARACTER_LCD && !defined(DISPLAY_CHARSET_HD44780)
- #error "You must set DISPLAY_CHARSET_HD44780 to JAPANESE, WESTERN or CYRILLIC for your LCD controller."
- #endif
-
- /**
- * Bed Heating Options - PID vs Limit Switching
- */
- #if BOTH(PIDTEMPBED, BED_LIMIT_SWITCHING)
- #error "To use BED_LIMIT_SWITCHING you must disable PIDTEMPBED."
- #endif
-
- /**
- * Kinematics
- */
-
- /**
- * Allow only one kinematic type to be defined
- */
- #if 1 < 0 \
- + ENABLED(DELTA) \
- + ENABLED(MORGAN_SCARA) \
- + ENABLED(COREXY) \
- + ENABLED(COREXZ) \
- + ENABLED(COREYZ) \
- + ENABLED(COREYX) \
- + ENABLED(COREZX) \
- + ENABLED(COREZY)
- #error "Please enable only one of DELTA, MORGAN_SCARA, COREXY, COREYX, COREXZ, COREZX, COREYZ, or COREZY."
- #endif
-
- /**
- * Delta requirements
- */
- #if ENABLED(DELTA)
- #if NONE(USE_XMAX_PLUG, USE_YMAX_PLUG, USE_ZMAX_PLUG)
- #error "You probably want to use Max Endstops for DELTA!"
- #elif ENABLED(ENABLE_LEVELING_FADE_HEIGHT) && DISABLED(AUTO_BED_LEVELING_BILINEAR) && !UBL_SEGMENTED
- #error "ENABLE_LEVELING_FADE_HEIGHT on DELTA requires AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL."
- #elif ENABLED(DELTA_AUTO_CALIBRATION) && !(HAS_BED_PROBE || HAS_LCD_MENU)
- #error "DELTA_AUTO_CALIBRATION requires a probe or LCD Controller."
- #elif ABL_GRID
- #if (GRID_MAX_POINTS_X & 1) == 0 || (GRID_MAX_POINTS_Y & 1) == 0
- #error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be odd numbers."
- #elif GRID_MAX_POINTS_X < 3
- #error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be 3 or higher."
- #endif
- #endif
- #endif
-
- /**
- * Junction deviation is incompatible with kinematic systems.
- */
- #if DISABLED(CLASSIC_JERK) && IS_KINEMATIC
- #error "CLASSIC_JERK is required for DELTA and SCARA."
- #endif
-
- /**
- * Probes
- */
-
- /**
- * Allow only one probe option to be defined
- */
- #if 1 < 0 \
- + ENABLED(PROBE_MANUALLY) \
- + ENABLED(FIX_MOUNTED_PROBE) \
- + (HAS_Z_SERVO_PROBE && DISABLED(BLTOUCH)) \
- + ENABLED(BLTOUCH) \
- + ENABLED(TOUCH_MI_PROBE) \
- + ENABLED(SOLENOID_PROBE) \
- + ENABLED(Z_PROBE_ALLEN_KEY) \
- + ENABLED(Z_PROBE_SLED) \
- + ENABLED(RACK_AND_PINION_PROBE) \
- + ENABLED(SENSORLESS_PROBING)
- #error "Please enable only one probe option: PROBE_MANUALLY, SENSORLESS_PROBING, BLTOUCH, FIX_MOUNTED_PROBE, TOUCH_MI_PROBE, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo."
- #endif
-
- #if HAS_BED_PROBE
-
- /**
- * Z_PROBE_SLED is incompatible with DELTA
- */
- #if BOTH(Z_PROBE_SLED, DELTA)
- #error "You cannot use Z_PROBE_SLED with DELTA."
- #endif
-
- /**
- * SOLENOID_PROBE requirements
- */
- #if ENABLED(SOLENOID_PROBE)
- #if ENABLED(EXT_SOLENOID)
- #error "SOLENOID_PROBE is incompatible with EXT_SOLENOID."
- #elif !HAS_SOLENOID_1
- #error "SOLENOID_PROBE requires SOL1_PIN. It can be added to your Configuration.h."
- #endif
- #endif
-
- /**
- * NUM_SERVOS is required for a Z servo probe
- */
- #if HAS_Z_SERVO_PROBE
- #ifndef NUM_SERVOS
- #error "You must set NUM_SERVOS for a Z servo probe (Z_PROBE_SERVO_NR)."
- #elif Z_PROBE_SERVO_NR == 0 && !PIN_EXISTS(SERVO0)
- #error "SERVO0_PIN must be defined for your servo or BLTOUCH probe."
- #elif Z_PROBE_SERVO_NR == 1 && !PIN_EXISTS(SERVO1)
- #error "SERVO1_PIN must be defined for your servo or BLTOUCH probe."
- #elif Z_PROBE_SERVO_NR == 2 && !PIN_EXISTS(SERVO2)
- #error "SERVO2_PIN must be defined for your servo or BLTOUCH probe."
- #elif Z_PROBE_SERVO_NR == 3 && !PIN_EXISTS(SERVO3)
- #error "SERVO3_PIN must be defined for your servo or BLTOUCH probe."
- #elif Z_PROBE_SERVO_NR >= NUM_SERVOS
- #error "Z_PROBE_SERVO_NR must be smaller than NUM_SERVOS."
- #endif
- #endif
-
- #if ENABLED(BLTOUCH)
- #if BLTOUCH_DELAY < 200
- #error "BLTOUCH_DELAY less than 200 is unsafe and is not supported."
- #elif DISABLED(BLTOUCH_SET_5V_MODE) && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMIN, ENDSTOPPULLUP_ZMIN_PROBE)
- #error "BLTOUCH without BLTOUCH_SET_5V_MODE requires ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMIN or ENDSTOPPULLUP_ZMIN_PROBE."
- #endif
- #endif
-
- #if ENABLED(RACK_AND_PINION_PROBE) && !(defined(Z_PROBE_DEPLOY_X) && defined(Z_PROBE_RETRACT_X))
- #error "RACK_AND_PINION_PROBE requires Z_PROBE_DEPLOY_X and Z_PROBE_RETRACT_X."
- #endif
-
- /**
- * Touch-MI probe requirements
- */
- #if ENABLED(TOUCH_MI_PROBE)
- #if DISABLED(Z_SAFE_HOMING)
- #error "TOUCH_MI_PROBE requires Z_SAFE_HOMING."
- #elif !defined(TOUCH_MI_RETRACT_Z)
- #error "TOUCH_MI_PROBE requires TOUCH_MI_RETRACT_Z."
- #elif defined(Z_AFTER_PROBING)
- #error "TOUCH_MI_PROBE requires Z_AFTER_PROBING to be disabled."
- #elif Z_HOMING_HEIGHT < 10
- #error "TOUCH_MI_PROBE requires Z_HOMING_HEIGHT >= 10."
- #elif Z_MIN_PROBE_ENDSTOP_INVERTING
- #error "TOUCH_MI_PROBE requires Z_MIN_PROBE_ENDSTOP_INVERTING to be set to false."
- #elif DISABLED(BABYSTEP_ZPROBE_OFFSET)
- #error "TOUCH_MI_PROBE requires BABYSTEPPING with BABYSTEP_ZPROBE_OFFSET."
- #elif !HAS_RESUME_CONTINUE
- #error "TOUCH_MI_PROBE currently requires an LCD controller or EMERGENCY_PARSER."
- #endif
- #endif
-
- /**
- * Require pin options and pins to be defined
- */
- #if ENABLED(SENSORLESS_PROBING)
- #if ENABLED(DELTA) && !(AXIS_HAS_STALLGUARD(X) && AXIS_HAS_STALLGUARD(Y) && AXIS_HAS_STALLGUARD(Z))
- #error "SENSORLESS_PROBING requires TMC2130/2160/2209/5130/5160 drivers on X, Y, and Z."
- #elif !AXIS_HAS_STALLGUARD(Z)
- #error "SENSORLESS_PROBING requires a TMC2130/2160/2209/5130/5160 driver on Z."
- #endif
- #elif ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
- #if DISABLED(USE_ZMIN_PLUG)
- #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires USE_ZMIN_PLUG to be enabled."
- #elif !HAS_Z_MIN
- #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires the Z_MIN_PIN to be defined."
- #elif Z_MIN_PROBE_ENDSTOP_INVERTING != Z_MIN_ENDSTOP_INVERTING
- #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires Z_MIN_ENDSTOP_INVERTING to match Z_MIN_PROBE_ENDSTOP_INVERTING."
- #endif
- #elif !HAS_Z_MIN_PROBE_PIN
- #error "Z_MIN_PROBE_PIN must be defined if Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN is not enabled."
- #endif
-
- /**
- * Make sure Z raise values are set
- */
- #ifndef Z_CLEARANCE_DEPLOY_PROBE
- #error "You must define Z_CLEARANCE_DEPLOY_PROBE in your configuration."
- #elif !defined(Z_CLEARANCE_BETWEEN_PROBES)
- #error "You must define Z_CLEARANCE_BETWEEN_PROBES in your configuration."
- #elif Z_CLEARANCE_DEPLOY_PROBE < 0
- #error "Probes need Z_CLEARANCE_DEPLOY_PROBE >= 0."
- #elif Z_CLEARANCE_BETWEEN_PROBES < 0
- #error "Probes need Z_CLEARANCE_BETWEEN_PROBES >= 0."
- #elif Z_AFTER_PROBING < 0
- #error "Probes need Z_AFTER_PROBING >= 0."
- #endif
-
- #if MULTIPLE_PROBING || EXTRA_PROBING
- #if !MULTIPLE_PROBING
- #error "EXTRA_PROBING requires MULTIPLE_PROBING."
- #elif MULTIPLE_PROBING < 2
- #error "MULTIPLE_PROBING must be 2 or more."
- #elif MULTIPLE_PROBING <= EXTRA_PROBING
- #error "EXTRA_PROBING must be less than MULTIPLE_PROBING."
- #endif
- #endif
-
- #if Z_PROBE_LOW_POINT > 0
- #error "Z_PROBE_LOW_POINT must be less than or equal to 0."
- #endif
-
- #else
-
- /**
- * Require some kind of probe for bed leveling and probe testing
- */
- #if HAS_ABL_NOT_UBL && !PROBE_SELECTED
- #error "Auto Bed Leveling requires one of these: PROBE_MANUALLY, FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or a Z Servo."
- #endif
-
- #if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
- #error "Z_MIN_PROBE_REPEATABILITY_TEST requires a probe: FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo."
- #endif
-
- #endif
-
- /**
- * Allow only one bed leveling option to be defined
- */
- #if 1 < 0 \
- + ENABLED(AUTO_BED_LEVELING_LINEAR) \
- + ENABLED(AUTO_BED_LEVELING_3POINT) \
- + ENABLED(AUTO_BED_LEVELING_BILINEAR) \
- + ENABLED(AUTO_BED_LEVELING_UBL) \
- + ENABLED(MESH_BED_LEVELING)
- #error "Select only one of: MESH_BED_LEVELING, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL."
- #endif
-
- /**
- * Bed Leveling Requirements
- */
-
- #if ENABLED(AUTO_BED_LEVELING_UBL)
-
- /**
- * Unified Bed Leveling
- */
-
- // Hide PROBE_MANUALLY from the rest of the code
- #undef PROBE_MANUALLY
-
- #if IS_SCARA
- #error "AUTO_BED_LEVELING_UBL does not yet support SCARA printers."
- #elif DISABLED(EEPROM_SETTINGS)
- #error "AUTO_BED_LEVELING_UBL requires EEPROM_SETTINGS. Please update your configuration."
- #elif !WITHIN(GRID_MAX_POINTS_X, 3, 15) || !WITHIN(GRID_MAX_POINTS_Y, 3, 15)
- #error "GRID_MAX_POINTS_[XY] must be a whole number between 3 and 15."
- #elif !defined(RESTORE_LEVELING_AFTER_G28)
- #error "AUTO_BED_LEVELING_UBL used to enable RESTORE_LEVELING_AFTER_G28. To keep this behavior enable RESTORE_LEVELING_AFTER_G28. Otherwise define it as 'false'."
- #endif
-
- #elif HAS_ABL_NOT_UBL
-
- /**
- * Auto Bed Leveling
- */
-
- /**
- * Delta and SCARA have limited bed leveling options
- */
- #if IS_SCARA && DISABLED(AUTO_BED_LEVELING_BILINEAR)
- #error "SCARA machines can only use the AUTO_BED_LEVELING_BILINEAR leveling option."
- #endif
-
- #elif ENABLED(MESH_BED_LEVELING)
-
- // Hide PROBE_MANUALLY from the rest of the code
- #undef PROBE_MANUALLY
-
- /**
- * Mesh Bed Leveling
- */
-
- #if ENABLED(DELTA)
- #error "MESH_BED_LEVELING is not compatible with DELTA printers."
- #elif GRID_MAX_POINTS_X > 9 || GRID_MAX_POINTS_Y > 9
- #error "GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y must be less than 10 for MBL."
- #endif
-
- #endif
-
- #if HAS_MESH
- #if HAS_CLASSIC_JERK
- static_assert(DEFAULT_ZJERK > 0.1, "Low DEFAULT_ZJERK values are incompatible with mesh-based leveling.");
- #endif
- #elif ENABLED(G26_MESH_VALIDATION)
- #error "G26_MESH_VALIDATION requires MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_UBL."
- #endif
-
- #if ENABLED(MESH_EDIT_GFX_OVERLAY) && !(ENABLED(AUTO_BED_LEVELING_UBL) && HAS_GRAPHICAL_LCD)
- #error "MESH_EDIT_GFX_OVERLAY requires AUTO_BED_LEVELING_UBL and a Graphical LCD."
- #endif
-
- #if ENABLED(G29_RETRY_AND_RECOVER)
- #if ENABLED(AUTO_BED_LEVELING_UBL)
- #error "G29_RETRY_AND_RECOVER is not compatible with UBL."
- #elif ENABLED(MESH_BED_LEVELING)
- #error "G29_RETRY_AND_RECOVER is not compatible with MESH_BED_LEVELING."
- #endif
- #endif
-
- /**
- * LCD_BED_LEVELING requirements
- */
- #if ENABLED(LCD_BED_LEVELING)
- #if !HAS_LCD_MENU
- #error "LCD_BED_LEVELING requires a programmable LCD controller."
- #elif !(ENABLED(MESH_BED_LEVELING) || HAS_ABL_NOT_UBL)
- #error "LCD_BED_LEVELING requires MESH_BED_LEVELING or AUTO_BED_LEVELING."
- #endif
- #endif
-
- /**
- * Homing
- */
- #if X_HOME_BUMP_MM < 0 || Y_HOME_BUMP_MM < 0 || Z_HOME_BUMP_MM < 0
- #error "[XYZ]_HOME_BUMP_MM must be greater than or equal to 0."
- #endif
-
- #if ENABLED(CODEPENDENT_XY_HOMING)
- #if ENABLED(QUICK_HOME)
- #error "QUICK_HOME is incompatible with CODEPENDENT_XY_HOMING."
- #elif IS_KINEMATIC
- #error "CODEPENDENT_XY_HOMING requires a Cartesian setup."
- #endif
- #endif
-
- /**
- * Make sure Z_SAFE_HOMING point is reachable
- */
- #if ENABLED(Z_SAFE_HOMING)
- #if HAS_BED_PROBE && (ENABLED(DELTA) || IS_SCARA)
- static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, PROBE_X_MIN, PROBE_X_MAX), "Z_SAFE_HOMING_X_POINT is outside the probe region.");
- static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, PROBE_Y_MIN, PROBE_Y_MAX), "Z_SAFE_HOMING_Y_POINT is outside the probe region.");
- #else
- static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, X_MIN_POS, X_MAX_POS), "Z_SAFE_HOMING_X_POINT can't be reached by the nozzle.");
- static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, Y_MIN_POS, Y_MAX_POS), "Z_SAFE_HOMING_Y_POINT can't be reached by the nozzle.");
- #endif
- #endif // Z_SAFE_HOMING
-
- /**
- * Make sure DISABLE_[XYZ] compatible with selected homing options
- */
- #if ANY(DISABLE_X, DISABLE_Y, DISABLE_Z)
- #if EITHER(HOME_AFTER_DEACTIVATE, Z_SAFE_HOMING)
- #error "DISABLE_[XYZ] is not compatible with HOME_AFTER_DEACTIVATE or Z_SAFE_HOMING."
- #endif
- #endif
-
- /**
- * Filament Width Sensor
- */
- #if ENABLED(FILAMENT_WIDTH_SENSOR)
- #if !HAS_FILAMENT_WIDTH_SENSOR
- #error "FILAMENT_WIDTH_SENSOR requires a FILWIDTH_PIN to be defined."
- #elif ENABLED(NO_VOLUMETRICS)
- #error "FILAMENT_WIDTH_SENSOR requires NO_VOLUMETRICS to be disabled."
- #endif
- #endif
-
- /**
- * ULTIPANEL encoder
- */
- #if ENABLED(ULTIPANEL) && NONE(NEWPANEL, SR_LCD_2W_NL) && !defined(SHIFT_CLK)
- #error "ULTIPANEL requires some kind of encoder."
- #endif
-
- #if ENCODER_PULSES_PER_STEP < 0
- #error "ENCODER_PULSES_PER_STEP should not be negative, use REVERSE_MENU_DIRECTION instead."
- #endif
-
- /**
- * SAV_3DGLCD display options
- */
- #if ENABLED(SAV_3DGLCD)
- #if NONE(U8GLIB_SSD1306, U8GLIB_SH1106)
- #error "Enable a SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106."
- #elif BOTH(U8GLIB_SSD1306, U8GLIB_SH1106)
- #error "Only enable one SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106."
- #endif
- #endif
-
- /**
- * Allen Key
- * Deploying the Allen Key probe uses big moves in z direction. Too dangerous for an unhomed z-axis.
- */
- #if ENABLED(Z_PROBE_ALLEN_KEY) && (Z_HOME_DIR < 0) && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
- #error "You can't home to a z min endstop with a Z_PROBE_ALLEN_KEY"
- #endif
-
- /**
- * Dual X Carriage requirements
- */
- #if ENABLED(DUAL_X_CARRIAGE)
- #if EXTRUDERS < 2
- #error "DUAL_X_CARRIAGE requires 2 (or more) extruders."
- #elif CORE_IS_XY || CORE_IS_XZ
- #error "DUAL_X_CARRIAGE cannot be used with COREXY, COREYX, COREXZ, or COREZX."
- #elif !(HAS_X2_ENABLE && HAS_X2_STEP && HAS_X2_DIR)
- #error "DUAL_X_CARRIAGE requires X2 stepper pins to be defined."
- #elif !HAS_X_MAX
- #error "DUAL_X_CARRIAGE requires USE_XMAX_PLUG and an X Max Endstop."
- #elif !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS)
- #error "DUAL_X_CARRIAGE requires X2_HOME_POS, X2_MIN_POS, and X2_MAX_POS."
- #elif X_HOME_DIR != -1 || X2_HOME_DIR != 1
- #error "DUAL_X_CARRIAGE requires X_HOME_DIR -1 and X2_HOME_DIR 1."
- #endif
- #endif
-
- /**
- * Make sure auto fan pins don't conflict with the fan pin
- */
- #if HAS_AUTO_FAN
- #if HAS_FAN0
- #if E0_AUTO_FAN_PIN == FAN_PIN
- #error "You cannot set E0_AUTO_FAN_PIN equal to FAN_PIN."
- #elif E1_AUTO_FAN_PIN == FAN_PIN
- #error "You cannot set E1_AUTO_FAN_PIN equal to FAN_PIN."
- #elif E2_AUTO_FAN_PIN == FAN_PIN
- #error "You cannot set E2_AUTO_FAN_PIN equal to FAN_PIN."
- #elif E3_AUTO_FAN_PIN == FAN_PIN
- #error "You cannot set E3_AUTO_FAN_PIN equal to FAN_PIN."
- #endif
- #endif
- #endif
-
- #if HAS_FAN0 && CONTROLLER_FAN_PIN == FAN_PIN
- #error "You cannot set CONTROLLER_FAN_PIN equal to FAN_PIN."
- #endif
-
- #if ENABLED(USE_CONTROLLER_FAN)
- #if !HAS_CONTROLLER_FAN
- #error "USE_CONTROLLER_FAN requires a CONTROLLER_FAN_PIN. Define in Configuration_adv.h."
- #elif E0_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
- #error "You cannot set E0_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
- #elif E1_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
- #error "You cannot set E1_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
- #elif E2_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
- #error "You cannot set E2_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
- #elif E3_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
- #error "You cannot set E3_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
- #endif
- #endif
-
- /**
- * Case Light requirements
- */
- #if ENABLED(CASE_LIGHT_ENABLE)
- #if !PIN_EXISTS(CASE_LIGHT)
- #error "CASE_LIGHT_ENABLE requires CASE_LIGHT_PIN to be defined."
- #elif CASE_LIGHT_PIN == FAN_PIN
- #error "CASE_LIGHT_PIN conflicts with FAN_PIN. Resolve before continuing."
- #endif
- #endif
-
- /**
- * Required custom thermistor settings
- */
- #if ENABLED(HEATER_0_USER_THERMISTOR) && !(defined(HOTEND0_PULLUP_RESISTOR_OHMS) && defined(HOTEND0_RESISTANCE_25C_OHMS) && defined(HOTEND0_BETA))
- #error "TEMP_SENSOR_0 1000 requires HOTEND0_PULLUP_RESISTOR_OHMS, HOTEND0_RESISTANCE_25C_OHMS and HOTEND0_BETA in Configuration_adv.h."
- #elif ENABLED(HEATER_1_USER_THERMISTOR) && !(defined(HOTEND1_PULLUP_RESISTOR_OHMS) && defined(HOTEND1_RESISTANCE_25C_OHMS) && defined(HOTEND1_BETA))
- #error "TEMP_SENSOR_1 1000 requires HOTEND1_PULLUP_RESISTOR_OHMS, HOTEND1_RESISTANCE_25C_OHMS and HOTEND1_BETA in Configuration_adv.h."
- #elif ENABLED(HEATER_2_USER_THERMISTOR) && !(defined(HOTEND2_PULLUP_RESISTOR_OHMS) && defined(HOTEND2_RESISTANCE_25C_OHMS) && defined(HOTEND2_BETA))
- #error "TEMP_SENSOR_2 1000 requires HOTEND2_PULLUP_RESISTOR_OHMS, HOTEND2_RESISTANCE_25C_OHMS and HOTEND2_BETA in Configuration_adv.h."
- #elif ENABLED(HEATER_3_USER_THERMISTOR) && !(defined(HOTEND3_PULLUP_RESISTOR_OHMS) && defined(HOTEND3_RESISTANCE_25C_OHMS) && defined(HOTEND3_BETA))
- #error "TEMP_SENSOR_3 1000 requires HOTEND3_PULLUP_RESISTOR_OHMS, HOTEND3_RESISTANCE_25C_OHMS and HOTEND3_BETA in Configuration_adv.h."
- #elif ENABLED(HEATER_4_USER_THERMISTOR) && !(defined(HOTEND4_PULLUP_RESISTOR_OHMS) && defined(HOTEND4_RESISTANCE_25C_OHMS) && defined(HOTEND4_BETA))
- #error "TEMP_SENSOR_4 1000 requires HOTEND4_PULLUP_RESISTOR_OHMS, HOTEND4_RESISTANCE_25C_OHMS and HOTEND4_BETA in Configuration_adv.h."
- #elif ENABLED(HEATER_5_USER_THERMISTOR) && !(defined(HOTEND5_PULLUP_RESISTOR_OHMS) && defined(HOTEND5_RESISTANCE_25C_OHMS) && defined(HOTEND5_BETA))
- #error "TEMP_SENSOR_5 1000 requires HOTEND5_PULLUP_RESISTOR_OHMS, HOTEND5_RESISTANCE_25C_OHMS and HOTEND5_BETA in Configuration_adv.h."
- #elif ENABLED(HEATER_BED_USER_THERMISTOR) && !(defined(BED_PULLUP_RESISTOR_OHMS) && defined(BED_RESISTANCE_25C_OHMS) && defined(BED_BETA))
- #error "TEMP_SENSOR_BED 1000 requires BED_PULLUP_RESISTOR_OHMS, BED_RESISTANCE_25C_OHMS and BED_BETA in Configuration_adv.h."
- #elif ENABLED(HEATER_CHAMBER_USER_THERMISTOR) && !(defined(CHAMBER_PULLUP_RESISTOR_OHMS) && defined(CHAMBER_RESISTANCE_25C_OHMS) && defined(CHAMBER_BETA))
- #error "TEMP_SENSOR_CHAMBER 1000 requires CHAMBER_PULLUP_RESISTOR_OHMS, CHAMBER_RESISTANCE_25C_OHMS and CHAMBER_BETA in Configuration_adv.h."
- #endif
-
- /**
- * Test Heater, Temp Sensor, and Extruder Pins; Sensor Type must also be set.
- */
- #if !HAS_HEATER_0
- #error "HEATER_0_PIN not defined for this board."
- #elif !ANY_PIN(TEMP_0, MAX6675_SS)
- #error "TEMP_0_PIN not defined for this board."
- #elif ((defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && !PIN_EXISTS(E0_STEP, E0_DIR))
- #error "E0_STEP_PIN or E0_DIR_PIN not defined for this board."
- #elif ( !(defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && (!PIN_EXISTS(E0_STEP, E0_DIR) || !HAS_E0_ENABLE))
- #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
- #elif EXTRUDERS && TEMP_SENSOR_0 == 0
- #error "TEMP_SENSOR_0 is required with any extruders."
- #endif
-
- // Pins are required for heaters
- #if ENABLED(HEATER_0_USES_MAX6675) && !PIN_EXISTS(MAX6675_SS)
- #error "MAX6675_SS_PIN (required for TEMP_SENSOR_0) not defined for this board."
- #elif (HOTENDS > 1 || ENABLED(HEATERS_PARALLEL)) && !HAS_HEATER_1
- #error "HEATER_1_PIN not defined for this board."
- #endif
-
- #if HOTENDS > 1
- #if ENABLED(HEATER_1_USES_MAX6675) && !PIN_EXISTS(MAX6675_SS2)
- #error "MAX6675_SS2_PIN (required for TEMP_SENSOR_1) not defined for this board."
- #elif TEMP_SENSOR_1 == 0
- #error "TEMP_SENSOR_1 is required with 2 or more HOTENDS."
- #elif !ANY_PIN(TEMP_1, MAX6675_SS2)
- #error "TEMP_1_PIN not defined for this board."
- #elif ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
- #error "HOTENDS must be 1 with TEMP_SENSOR_1_AS_REDUNDANT."
- #endif
- #if HOTENDS > 2
- #if TEMP_SENSOR_2 == 0
- #error "TEMP_SENSOR_2 is required with 3 or more HOTENDS."
- #elif !HAS_HEATER_2
- #error "HEATER_2_PIN not defined for this board."
- #elif !PIN_EXISTS(TEMP_2)
- #error "TEMP_2_PIN not defined for this board."
- #endif
- #if HOTENDS > 3
- #if TEMP_SENSOR_3 == 0
- #error "TEMP_SENSOR_3 is required with 4 or more HOTENDS."
- #elif !HAS_HEATER_3
- #error "HEATER_3_PIN not defined for this board."
- #elif !PIN_EXISTS(TEMP_3)
- #error "TEMP_3_PIN not defined for this board."
- #endif
- #if HOTENDS > 4
- #if TEMP_SENSOR_4 == 0
- #error "TEMP_SENSOR_4 is required with 5 or more HOTENDS."
- #elif !HAS_HEATER_4
- #error "HEATER_4_PIN not defined for this board."
- #elif !PIN_EXISTS(TEMP_4)
- #error "TEMP_4_PIN not defined for this board."
- #endif
- #if HOTENDS > 5
- #if TEMP_SENSOR_5 == 0
- #error "TEMP_SENSOR_5 is required with 6 HOTENDS."
- #elif !HAS_HEATER_5
- #error "HEATER_5_PIN not defined for this board."
- #elif !PIN_EXISTS(TEMP_5)
- #error "TEMP_5_PIN not defined for this board."
- #endif
- #elif TEMP_SENSOR_5 != 0
- #error "TEMP_SENSOR_5 shouldn't be set with only 5 HOTENDS."
- #endif
- #elif TEMP_SENSOR_4 != 0
- #error "TEMP_SENSOR_4 shouldn't be set with only 4 HOTENDS."
- #elif TEMP_SENSOR_5 != 0
- #error "TEMP_SENSOR_5 shouldn't be set with only 4 HOTENDS."
- #endif
- #elif TEMP_SENSOR_3 != 0
- #error "TEMP_SENSOR_3 shouldn't be set with only 3 HOTENDS."
- #elif TEMP_SENSOR_4 != 0
- #error "TEMP_SENSOR_4 shouldn't be set with only 3 HOTENDS."
- #elif TEMP_SENSOR_5 != 0
- #error "TEMP_SENSOR_5 shouldn't be set with only 3 HOTENDS."
- #endif
- #elif TEMP_SENSOR_2 != 0
- #error "TEMP_SENSOR_2 shouldn't be set with only 2 HOTENDS."
- #elif TEMP_SENSOR_3 != 0
- #error "TEMP_SENSOR_3 shouldn't be set with only 2 HOTENDS."
- #elif TEMP_SENSOR_4 != 0
- #error "TEMP_SENSOR_4 shouldn't be set with only 2 HOTENDS."
- #elif TEMP_SENSOR_5 != 0
- #error "TEMP_SENSOR_5 shouldn't be set with only 2 HOTENDS."
- #endif
- #elif TEMP_SENSOR_1 != 0 && DISABLED(TEMP_SENSOR_1_AS_REDUNDANT)
- #error "TEMP_SENSOR_1 shouldn't be set with only 1 HOTEND."
- #elif TEMP_SENSOR_2 != 0
- #error "TEMP_SENSOR_2 shouldn't be set with only 1 HOTEND."
- #elif TEMP_SENSOR_3 != 0
- #error "TEMP_SENSOR_3 shouldn't be set with only 1 HOTEND."
- #elif TEMP_SENSOR_4 != 0
- #error "TEMP_SENSOR_4 shouldn't be set with only 1 HOTEND."
- #elif TEMP_SENSOR_5 != 0
- #error "TEMP_SENSOR_5 shouldn't be set with only 1 HOTEND."
- #endif
-
- #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) && TEMP_SENSOR_1 == 0
- #error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT."
- #endif
-
- /**
- * Temperature status LEDs
- */
- #if ENABLED(TEMP_STAT_LEDS) && !ANY_PIN(STAT_LED_RED, STAT_LED_BLUE)
- #error "TEMP_STAT_LEDS requires STAT_LED_RED_PIN or STAT_LED_BLUE_PIN, preferably both."
- #endif
-
- /**
- * LED Control Menu
- */
- #if ENABLED(LED_CONTROL_MENU) && !HAS_COLOR_LEDS
- #error "LED_CONTROL_MENU requires BLINKM, RGB_LED, RGBW_LED, PCA9533, PCA9632, or NEOPIXEL_LED."
- #endif
-
- /**
- * LED Backlight Timeout
- */
- #if defined(LED_BACKLIGHT_TIMEOUT) && !(ENABLED(PSU_CONTROL) && EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1))
- #error "LED_BACKLIGHT_TIMEOUT requires a FYSETC Mini Panel and a Power Switch."
- #endif
-
- /**
- * Basic multi hotend duplication mode
- */
- #if ENABLED(MULTI_NOZZLE_DUPLICATION)
- #if HOTENDS < 2
- #error "MULTI_NOZZLE_DUPLICATION requires 2 or more hotends."
- #elif ENABLED(DUAL_X_CARRIAGE)
- #error "MULTI_NOZZLE_DUPLICATION is incompatible with DUAL_X_CARRIAGE."
- #elif ENABLED(SINGLENOZZLE)
- #error "MULTI_NOZZLE_DUPLICATION is incompatible with SINGLENOZZLE."
- #elif ENABLED(MIXING_EXTRUDER)
- #error "MULTI_NOZZLE_DUPLICATION is incompatible with MIXING_EXTRUDER."
- #elif ENABLED(SWITCHING_EXTRUDER)
- #error "MULTI_NOZZLE_DUPLICATION is incompatible with SWITCHING_EXTRUDER."
- #endif
- #endif
-
- /**
- * Test Extruder Stepper Pins
- */
- #if DISABLED(MK2_MULTIPLEXER) // MK2_MULTIPLEXER uses E0 stepper only
- #if E_STEPPERS
- #if !(PIN_EXISTS(E0_STEP, E0_DIR) && HAS_E0_ENABLE)
- #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
- #endif
- #if E_STEPPERS > 1
- #if !(PIN_EXISTS(E1_STEP, E1_DIR) && HAS_E1_ENABLE)
- #error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board."
- #endif
- #if E_STEPPERS > 2
- #if !(PIN_EXISTS(E2_STEP, E2_DIR) && HAS_E2_ENABLE)
- #error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board."
- #endif
- #if E_STEPPERS > 3
- #if !(PIN_EXISTS(E3_STEP, E3_DIR) && HAS_E3_ENABLE)
- #error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board."
- #endif
- #if E_STEPPERS > 4
- #if !(PIN_EXISTS(E4_STEP, E4_DIR) && HAS_E4_ENABLE)
- #error "E4_STEP_PIN, E4_DIR_PIN, or E4_ENABLE_PIN not defined for this board."
- #endif
- #if E_STEPPERS > 5
- #if !(PIN_EXISTS(E5_STEP, E5_DIR) && HAS_E5_ENABLE)
- #error "E5_STEP_PIN, E5_DIR_PIN, or E5_ENABLE_PIN not defined for this board."
- #endif
- #endif // E_STEPPERS > 5
- #endif // E_STEPPERS > 4
- #endif // E_STEPPERS > 3
- #endif // E_STEPPERS > 2
- #endif // E_STEPPERS > 1
- #endif // E_STEPPERS
- #endif
-
- /**
- * Endstop Tests
- */
-
- #define _PLUG_UNUSED_TEST(AXIS,PLUG) (DISABLED(USE_##PLUG##MIN_PLUG, USE_##PLUG##MAX_PLUG) && !(ENABLED(AXIS##_DUAL_ENDSTOPS) && WITHIN(AXIS##2_USE_ENDSTOP, _##PLUG##MAX_, _##PLUG##MIN_)))
- #define _AXIS_PLUG_UNUSED_TEST(AXIS) (_PLUG_UNUSED_TEST(AXIS,X) && _PLUG_UNUSED_TEST(AXIS,Y) && _PLUG_UNUSED_TEST(AXIS,Z))
-
- // At least 3 endstop plugs must be used
- #if _AXIS_PLUG_UNUSED_TEST(X)
- #error "You must enable USE_XMIN_PLUG or USE_XMAX_PLUG."
- #endif
- #if _AXIS_PLUG_UNUSED_TEST(Y)
- #error "You must enable USE_YMIN_PLUG or USE_YMAX_PLUG."
- #endif
- #if _AXIS_PLUG_UNUSED_TEST(Z)
- #error "You must enable USE_ZMIN_PLUG or USE_ZMAX_PLUG."
- #endif
-
- // Delta and Cartesian use 3 homing endstops
- #if !IS_SCARA
- #if X_HOME_DIR < 0 && DISABLED(USE_XMIN_PLUG)
- #error "Enable USE_XMIN_PLUG when homing X to MIN."
- #elif X_HOME_DIR > 0 && DISABLED(USE_XMAX_PLUG)
- #error "Enable USE_XMAX_PLUG when homing X to MAX."
- #elif Y_HOME_DIR < 0 && DISABLED(USE_YMIN_PLUG)
- #error "Enable USE_YMIN_PLUG when homing Y to MIN."
- #elif Y_HOME_DIR > 0 && DISABLED(USE_YMAX_PLUG)
- #error "Enable USE_YMAX_PLUG when homing Y to MAX."
- #endif
- #endif
- #if Z_HOME_DIR < 0 && DISABLED(USE_ZMIN_PLUG)
- #error "Enable USE_ZMIN_PLUG when homing Z to MIN."
- #elif Z_HOME_DIR > 0 && DISABLED(USE_ZMAX_PLUG)
- #error "Enable USE_ZMAX_PLUG when homing Z to MAX."
- #endif
-
- // Dual endstops requirements
- #if ENABLED(X_DUAL_ENDSTOPS)
- #if !X2_USE_ENDSTOP
- #error "You must set X2_USE_ENDSTOP with X_DUAL_ENDSTOPS."
- #elif X2_USE_ENDSTOP == _XMIN_ && DISABLED(USE_XMIN_PLUG)
- #error "USE_XMIN_PLUG is required when X2_USE_ENDSTOP is _XMIN_."
- #elif X2_USE_ENDSTOP == _XMAX_ && DISABLED(USE_XMAX_PLUG)
- #error "USE_XMAX_PLUG is required when X2_USE_ENDSTOP is _XMAX_."
- #elif X2_USE_ENDSTOP == _YMIN_ && DISABLED(USE_YMIN_PLUG)
- #error "USE_YMIN_PLUG is required when X2_USE_ENDSTOP is _YMIN_."
- #elif X2_USE_ENDSTOP == _YMAX_ && DISABLED(USE_YMAX_PLUG)
- #error "USE_YMAX_PLUG is required when X2_USE_ENDSTOP is _YMAX_."
- #elif X2_USE_ENDSTOP == _ZMIN_ && DISABLED(USE_ZMIN_PLUG)
- #error "USE_ZMIN_PLUG is required when X2_USE_ENDSTOP is _ZMIN_."
- #elif X2_USE_ENDSTOP == _ZMAX_ && DISABLED(USE_ZMAX_PLUG)
- #error "USE_ZMAX_PLUG is required when X2_USE_ENDSTOP is _ZMAX_."
- #elif !HAS_X2_MIN && !HAS_X2_MAX
- #error "X2_USE_ENDSTOP has been assigned to a nonexistent endstop!"
- #elif ENABLED(DELTA)
- #error "X_DUAL_ENDSTOPS is not compatible with DELTA."
- #endif
- #endif
- #if ENABLED(Y_DUAL_ENDSTOPS)
- #if !Y2_USE_ENDSTOP
- #error "You must set Y2_USE_ENDSTOP with Y_DUAL_ENDSTOPS."
- #elif Y2_USE_ENDSTOP == _XMIN_ && DISABLED(USE_XMIN_PLUG)
- #error "USE_XMIN_PLUG is required when Y2_USE_ENDSTOP is _XMIN_."
- #elif Y2_USE_ENDSTOP == _XMAX_ && DISABLED(USE_XMAX_PLUG)
- #error "USE_XMAX_PLUG is required when Y2_USE_ENDSTOP is _XMAX_."
- #elif Y2_USE_ENDSTOP == _YMIN_ && DISABLED(USE_YMIN_PLUG)
- #error "USE_YMIN_PLUG is required when Y2_USE_ENDSTOP is _YMIN_."
- #elif Y2_USE_ENDSTOP == _YMAX_ && DISABLED(USE_YMAX_PLUG)
- #error "USE_YMAX_PLUG is required when Y2_USE_ENDSTOP is _YMAX_."
- #elif Y2_USE_ENDSTOP == _ZMIN_ && DISABLED(USE_ZMIN_PLUG)
- #error "USE_ZMIN_PLUG is required when Y2_USE_ENDSTOP is _ZMIN_."
- #elif Y2_USE_ENDSTOP == _ZMAX_ && DISABLED(USE_ZMAX_PLUG)
- #error "USE_ZMAX_PLUG is required when Y2_USE_ENDSTOP is _ZMAX_."
- #elif !HAS_Y2_MIN && !HAS_Y2_MAX
- #error "Y2_USE_ENDSTOP has been assigned to a nonexistent endstop!"
- #elif ENABLED(DELTA)
- #error "Y_DUAL_ENDSTOPS is not compatible with DELTA."
- #endif
- #endif
- #if ENABLED(Z_DUAL_ENDSTOPS)
- #if !Z2_USE_ENDSTOP
- #error "You must set Z2_USE_ENDSTOP with Z_DUAL_ENDSTOPS."
- #elif Z2_USE_ENDSTOP == _XMIN_ && DISABLED(USE_XMIN_PLUG)
- #error "USE_XMIN_PLUG is required when Z2_USE_ENDSTOP is _XMIN_."
- #elif Z2_USE_ENDSTOP == _XMAX_ && DISABLED(USE_XMAX_PLUG)
- #error "USE_XMAX_PLUG is required when Z2_USE_ENDSTOP is _XMAX_."
- #elif Z2_USE_ENDSTOP == _YMIN_ && DISABLED(USE_YMIN_PLUG)
- #error "USE_YMIN_PLUG is required when Z2_USE_ENDSTOP is _YMIN_."
- #elif Z2_USE_ENDSTOP == _YMAX_ && DISABLED(USE_YMAX_PLUG)
- #error "USE_YMAX_PLUG is required when Z2_USE_ENDSTOP is _YMAX_."
- #elif Z2_USE_ENDSTOP == _ZMIN_ && DISABLED(USE_ZMIN_PLUG)
- #error "USE_ZMIN_PLUG is required when Z2_USE_ENDSTOP is _ZMIN_."
- #elif Z2_USE_ENDSTOP == _ZMAX_ && DISABLED(USE_ZMAX_PLUG)
- #error "USE_ZMAX_PLUG is required when Z2_USE_ENDSTOP is _ZMAX_."
- #elif !HAS_Z2_MIN && !HAS_Z2_MAX
- #error "Z2_USE_ENDSTOP has been assigned to a nonexistent endstop!"
- #elif ENABLED(DELTA)
- #error "Z_DUAL_ENDSTOPS is not compatible with DELTA."
- #endif
- #endif
- #if ENABLED(Z_TRIPLE_ENDSTOPS)
- #if !Z2_USE_ENDSTOP
- #error "You must set Z2_USE_ENDSTOP with Z_TRIPLE_ENDSTOPS."
- #elif Z2_USE_ENDSTOP == _XMIN_ && DISABLED(USE_XMIN_PLUG)
- #error "USE_XMIN_PLUG is required when Z2_USE_ENDSTOP is _XMIN_."
- #elif Z2_USE_ENDSTOP == _XMAX_ && DISABLED(USE_XMAX_PLUG)
- #error "USE_XMAX_PLUG is required when Z2_USE_ENDSTOP is _XMAX_."
- #elif Z2_USE_ENDSTOP == _YMIN_ && DISABLED(USE_YMIN_PLUG)
- #error "USE_YMIN_PLUG is required when Z2_USE_ENDSTOP is _YMIN_."
- #elif Z2_USE_ENDSTOP == _YMAX_ && DISABLED(USE_YMAX_PLUG)
- #error "USE_YMAX_PLUG is required when Z2_USE_ENDSTOP is _YMAX_."
- #elif Z2_USE_ENDSTOP == _ZMIN_ && DISABLED(USE_ZMIN_PLUG)
- #error "USE_ZMIN_PLUG is required when Z2_USE_ENDSTOP is _ZMIN_."
- #elif Z2_USE_ENDSTOP == _ZMAX_ && DISABLED(USE_ZMAX_PLUG)
- #error "USE_ZMAX_PLUG is required when Z2_USE_ENDSTOP is _ZMAX_."
- #elif !HAS_Z2_MIN && !HAS_Z2_MAX
- #error "Z2_USE_ENDSTOP has been assigned to a nonexistent endstop!"
- #elif ENABLED(DELTA)
- #error "Z_TRIPLE_ENDSTOPS is not compatible with DELTA."
- #endif
- #if !Z3_USE_ENDSTOP
- #error "You must set Z3_USE_ENDSTOP with Z_TRIPLE_ENDSTOPS."
- #elif Z3_USE_ENDSTOP == _XMIN_ && DISABLED(USE_XMIN_PLUG)
- #error "USE_XMIN_PLUG is required when Z3_USE_ENDSTOP is _XMIN_."
- #elif Z3_USE_ENDSTOP == _XMAX_ && DISABLED(USE_XMAX_PLUG)
- #error "USE_XMAX_PLUG is required when Z3_USE_ENDSTOP is _XMAX_."
- #elif Z3_USE_ENDSTOP == _YMIN_ && DISABLED(USE_YMIN_PLUG)
- #error "USE_YMIN_PLUG is required when Z3_USE_ENDSTOP is _YMIN_."
- #elif Z3_USE_ENDSTOP == _YMAX_ && DISABLED(USE_YMAX_PLUG)
- #error "USE_YMAX_PLUG is required when Z3_USE_ENDSTOP is _YMAX_."
- #elif Z3_USE_ENDSTOP == _ZMIN_ && DISABLED(USE_ZMIN_PLUG)
- #error "USE_ZMIN_PLUG is required when Z3_USE_ENDSTOP is _ZMIN_."
- #elif Z3_USE_ENDSTOP == _ZMAX_ && DISABLED(USE_ZMAX_PLUG)
- #error "USE_ZMAX_PLUG is required when Z3_USE_ENDSTOP is _ZMAX_."
- #elif !HAS_Z3_MIN && !HAS_Z3_MAX
- #error "Z3_USE_ENDSTOP has been assigned to a nonexistent endstop!"
- #elif ENABLED(DELTA)
- #error "Z_TRIPLE_ENDSTOPS is not compatible with DELTA."
- #endif
- #endif
-
- #if defined(ENDSTOP_NOISE_THRESHOLD) && !WITHIN(ENDSTOP_NOISE_THRESHOLD, 2, 7)
- #error "ENDSTOP_NOISE_THRESHOLD must be an integer from 2 to 7."
- #endif
-
- /**
- * emergency-command parser
- */
- #if ENABLED(EMERGENCY_PARSER) && defined(__AVR__) && defined(USBCON)
- #error "EMERGENCY_PARSER does not work on boards with AT90USB processors (USBCON)."
- #endif
-
- /**
- * I2C bus
- */
- #if ENABLED(EXPERIMENTAL_I2CBUS) && I2C_SLAVE_ADDRESS > 0
- #if I2C_SLAVE_ADDRESS < 8
- #error "I2C_SLAVE_ADDRESS can't be less than 8. (Addresses 0 - 7 are reserved.)"
- #elif I2C_SLAVE_ADDRESS > 127
- #error "I2C_SLAVE_ADDRESS can't be over 127. (Only 7 bits allowed.)"
- #endif
- #endif
-
- /**
- * G38 Probe Target
- */
- #if ENABLED(G38_PROBE_TARGET)
- #if !HAS_BED_PROBE
- #error "G38_PROBE_TARGET requires a bed probe."
- #elif !IS_CARTESIAN
- #error "G38_PROBE_TARGET requires a Cartesian machine."
- #endif
- #endif
-
- /**
- * RGB_LED Requirements
- */
- #define _RGB_TEST (PIN_EXISTS(RGB_LED_R, RGB_LED_G, RGB_LED_B))
- #if ENABLED(PRINTER_EVENT_LEDS) && !HAS_COLOR_LEDS
- #error "PRINTER_EVENT_LEDS requires BLINKM, PCA9533, PCA9632, RGB_LED, RGBW_LED or NEOPIXEL_LED."
- #elif ENABLED(RGB_LED)
- #if !_RGB_TEST
- #error "RGB_LED requires RGB_LED_R_PIN, RGB_LED_G_PIN, and RGB_LED_B_PIN."
- #elif ENABLED(RGBW_LED)
- #error "Please enable only one of RGB_LED and RGBW_LED."
- #endif
- #elif ENABLED(RGBW_LED)
- #if !(_RGB_TEST && PIN_EXISTS(RGB_LED_W))
- #error "RGBW_LED requires RGB_LED_R_PIN, RGB_LED_G_PIN, RGB_LED_B_PIN, and RGB_LED_W_PIN."
- #endif
- #elif ENABLED(NEOPIXEL_LED)
- #if !(PIN_EXISTS(NEOPIXEL) && NEOPIXEL_PIXELS > 0)
- #error "NEOPIXEL_LED requires NEOPIXEL_PIN and NEOPIXEL_PIXELS."
- #endif
- #endif
- #undef _RGB_TEST
-
- /**
- * Auto Fan check for PWM pins
- */
- #if HAS_AUTO_FAN && EXTRUDER_AUTO_FAN_SPEED != 255
- #define AF_ERR_SUFF "_AUTO_FAN_PIN is not a PWM pin. Set EXTRUDER_AUTO_FAN_SPEED to 255."
- #if HAS_AUTO_FAN_0
- static_assert(PWM_PIN(E0_AUTO_FAN_PIN), "E0" AF_ERR_SUFF);
- #elif HAS_AUTO_FAN_1
- static_assert(PWM_PIN(E1_AUTO_FAN_PIN), "E1" AF_ERR_SUFF);
- #elif HAS_AUTO_FAN_2
- static_assert(PWM_PIN(E2_AUTO_FAN_PIN), "E2" AF_ERR_SUFF);
- #elif HAS_AUTO_FAN_3
- static_assert(PWM_PIN(E3_AUTO_FAN_PIN), "E3" AF_ERR_SUFF);
- #endif
- #endif
-
- /**
- * Make sure only one display is enabled
- */
- #if 1 < 0 \
- + (ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && DISABLED(IS_RRD_SC)) \
- + (ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(IS_RRD_FG_SC)) \
- + (ENABLED(ULTRA_LCD) && DISABLED(IS_ULTRA_LCD)) \
- + (ENABLED(U8GLIB_SSD1306) && DISABLED(IS_U8GLIB_SSD1306)) \
- + (ENABLED(MINIPANEL) && DISABLED(MKS_MINI_12864)) \
- + (ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(IS_RRW_KEYPAD)) \
- + (ENABLED(EXTENSIBLE_UI) && DISABLED(IS_EXTUI)) \
- + (ENABLED(ULTIPANEL) && DISABLED(IS_ULTIPANEL)) \
- + ENABLED(RADDS_DISPLAY) \
- + ENABLED(ULTIMAKERCONTROLLER) \
- + ENABLED(PANEL_ONE) \
- + ENABLED(G3D_PANEL) \
- + ENABLED(RIGIDBOT_PANEL) \
- + ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) \
- + ENABLED(ZONESTAR_LCD) \
- + ENABLED(RA_CONTROL_PANEL) \
- + ENABLED(LCD_SAINSMART_I2C_1602) \
- + ENABLED(LCD_SAINSMART_I2C_2004) \
- + ENABLED(LCM1602) \
- + ENABLED(LCD_I2C_PANELOLU2) \
- + ENABLED(LCD_I2C_VIKI) \
- + ENABLED(SAV_3DLCD) \
- + ENABLED(FF_INTERFACEBOARD) \
- + ENABLED(REPRAPWORLD_GRAPHICAL_LCD) \
- + ENABLED(VIKI2) \
- + ENABLED(miniVIKI) \
- + ENABLED(MAKRPANEL) \
- + ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
- + ENABLED(BQ_LCD_SMART_CONTROLLER) \
- + ENABLED(CARTESIO_UI) \
- + ENABLED(LCD_FOR_MELZI) \
- + ENABLED(ULTI_CONTROLLER) \
- + ENABLED(MKS_MINI_12864) \
- + ENABLED(FYSETC_MINI_12864_X_X) \
- + ENABLED(FYSETC_MINI_12864_1_2) \
- + ENABLED(FYSETC_MINI_12864_2_0) \
- + ENABLED(FYSETC_MINI_12864_2_1) \
- + ENABLED(CR10_STOCKDISPLAY) \
- + ENABLED(ANET_FULL_GRAPHICS_LCD) \
- + ENABLED(AZSMZ_12864) \
- + ENABLED(SILVER_GATE_GLCD_CONTROLLER) \
- + ENABLED(SAV_3DGLCD) \
- + ENABLED(OLED_PANEL_TINYBOY2) \
- + ENABLED(MKS_12864OLED) \
- + ENABLED(MKS_12864OLED_SSD1306) \
- + ENABLED(U8GLIB_SH1106_EINSTART) \
- + ENABLED(OVERLORD_OLED) \
- + ENABLED(DGUS_LCD) \
- + ENABLED(MALYAN_LCD) \
- + ENABLED(TOUCH_UI_FTDI_EVE) \
- + ENABLED(FSMC_GRAPHICAL_TFT)
- #error "Please select no more than one LCD controller option."
- #endif
-
- #undef IS_RRD_SC
- #undef IS_RRD_FG_SC
- #undef IS_ULTRA_LCD
- #undef IS_U8GLIB_SSD1306
- #undef IS_RRW_KEYPAD
- #undef IS_EXTUI
- #undef IS_ULTIPANEL
-
- /**
- * FYSETC Mini 12864 RGB backlighting required
- */
- #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) && DISABLED(RGB_LED)
- #error "RGB_LED is required for FYSETC_MINI_12864 1.2 and 2.0."
- #elif EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1) && DISABLED(LED_USER_PRESET_STARTUP)
- #error "LED_USER_PRESET_STARTUP is required for FYSETC_MINI_12864 2.x displays."
- #endif
-
- /**
- * Check existing CS pins against enabled TMC SPI drivers.
- */
- #define INVALID_TMC_SPI(ST) (AXIS_HAS_SPI && !PIN_EXISTS(ST##_CS))
- #if INVALID_TMC_SPI(X)
- #error "An SPI driven TMC driver on X requires X_CS_PIN."
- #elif INVALID_TMC_SPI(X2)
- #error "An SPI driven TMC driver on X2 requires X2_CS_PIN."
- #elif INVALID_TMC_SPI(Y)
- #error "An SPI driven TMC driver on Y requires Y_CS_PIN."
- #elif INVALID_TMC_SPI(Y2)
- #error "An SPI driven TMC driver on Y2 requires Y2_CS_PIN."
- #elif INVALID_TMC_SPI(Z)
- #error "An SPI driven TMC driver on Z requires Z_CS_PIN."
- #elif INVALID_TMC_SPI(Z2)
- #error "An SPI driven TMC driver on Z2 requires Z2_CS_PIN."
- #elif INVALID_TMC_SPI(Z3)
- #error "An SPI driven TMC driver on Z3 requires Z3_CS_PIN."
- #elif INVALID_TMC_SPI(E0)
- #error "An SPI driven TMC driver on E0 requires E0_CS_PIN."
- #elif INVALID_TMC_SPI(E1)
- #error "An SPI driven TMC driver on E1 requires E1_CS_PIN."
- #elif INVALID_TMC_SPI(E2)
- #error "An SPI driven TMC driver on E2 requires E2_CS_PIN."
- #elif INVALID_TMC_SPI(E3)
- #error "An SPI driven TMC driver on E3 requires E3_CS_PIN."
- #elif INVALID_TMC_SPI(E4)
- #error "An SPI driven TMC driver on E4 requires E4_CS_PIN."
- #elif INVALID_TMC_SPI(E5)
- #error "An SPI driven TMC driver on E5 requires E5_CS_PIN."
- #endif
- #undef INVALID_TMC_SPI
-
- /**
- * Check existing RX/TX pins against enable TMC UART drivers.
- */
- #define INVALID_TMC_UART(ST) (AXIS_HAS_UART(ST) && !(defined(ST##_HARDWARE_SERIAL) || (PIN_EXISTS(ST##_SERIAL_RX, ST##_SERIAL_TX))))
- #if INVALID_TMC_UART(X)
- #error "TMC2208 or TMC2209 on X requires X_HARDWARE_SERIAL or X_SERIAL_(RX|TX)_PIN."
- #elif INVALID_TMC_UART(X2)
- #error "TMC2208 or TMC2209 on X2 requires X2_HARDWARE_SERIAL or X2_SERIAL_(RX|TX)_PIN."
- #elif INVALID_TMC_UART(Y)
- #error "TMC2208 or TMC2209 on Y requires Y_HARDWARE_SERIAL or Y_SERIAL_(RX|TX)_PIN."
- #elif INVALID_TMC_UART(Y2)
- #error "TMC2208 or TMC2209 on Y2 requires Y2_HARDWARE_SERIAL or Y2_SERIAL_(RX|TX)_PIN."
- #elif INVALID_TMC_UART(Z)
- #error "TMC2208 or TMC2209 on Z requires Z_HARDWARE_SERIAL or Z_SERIAL_(RX|TX)_PIN."
- #elif INVALID_TMC_UART(Z2)
- #error "TMC2208 or TMC2209 on Z2 requires Z2_HARDWARE_SERIAL or Z2_SERIAL_(RX|TX)_PIN."
- #elif INVALID_TMC_UART(Z3)
- #error "TMC2208 or TMC2209 on Z3 requires Z3_HARDWARE_SERIAL or Z3_SERIAL_(RX|TX)_PIN."
- #elif INVALID_TMC_UART(E0)
- #error "TMC2208 or TMC2209 on E0 requires E0_HARDWARE_SERIAL or E0_SERIAL_(RX|TX)_PIN."
- #elif INVALID_TMC_UART(E1)
- #error "TMC2208 or TMC2209 on E1 requires E1_HARDWARE_SERIAL or E1_SERIAL_(RX|TX)_PIN."
- #elif INVALID_TMC_UART(E2)
- #error "TMC2208 or TMC2209 on E2 requires E2_HARDWARE_SERIAL or E2_SERIAL_(RX|TX)_PIN."
- #elif INVALID_TMC_UART(E3)
- #error "TMC2208 or TMC2209 on E3 requires E3_HARDWARE_SERIAL or E3_SERIAL_(RX|TX)_PIN."
- #elif INVALID_TMC_UART(E4)
- #error "TMC2208 or TMC2209 on E4 requires E4_HARDWARE_SERIAL or E4_SERIAL_(RX|TX)_PIN."
- #elif INVALID_TMC_UART(E5)
- #error "TMC2208 or TMC2209 on E5 requires E5_HARDWARE_SERIAL or E5_SERIAL_(RX|TX)_PIN."
- #endif
- #undef INVALID_TMC_UART
-
- /**
- * TMC2209 slave address values
- */
- #define INVALID_TMC_ADDRESS(ST) static_assert(0 <= ST##_SLAVE_ADDRESS && ST##_SLAVE_ADDRESS <= 3, "TMC2209 slave address must be 0, 1, 2 or 3")
- #if AXIS_DRIVER_TYPE_X(TMC2209)
- INVALID_TMC_ADDRESS(X);
- #elif AXIS_DRIVER_TYPE_X2(TMC2209)
- INVALID_TMC_ADDRESS(X2);
- #elif AXIS_DRIVER_TYPE_Y(TMC2209)
- INVALID_TMC_ADDRESS(Y);
- #elif AXIS_DRIVER_TYPE_Y2(TMC2209)
- INVALID_TMC_ADDRESS(Y2);
- #elif AXIS_DRIVER_TYPE_Z(TMC2209)
- INVALID_TMC_ADDRESS(Z);
- #elif AXIS_DRIVER_TYPE_Z2(TMC2209)
- INVALID_TMC_ADDRESS(Z2);
- #elif AXIS_DRIVER_TYPE_Z3(TMC2209)
- INVALID_TMC_ADDRESS(Z3);
- #elif AXIS_DRIVER_TYPE_E0(TMC2209)
- INVALID_TMC_ADDRESS(E0);
- #elif AXIS_DRIVER_TYPE_E1(TMC2209)
- INVALID_TMC_ADDRESS(E1);
- #elif AXIS_DRIVER_TYPE_E2(TMC2209)
- INVALID_TMC_ADDRESS(E2);
- #elif AXIS_DRIVER_TYPE_E3(TMC2209)
- INVALID_TMC_ADDRESS(E3);
- #elif AXIS_DRIVER_TYPE_E4(TMC2209)
- INVALID_TMC_ADDRESS(E4);
- #elif AXIS_DRIVER_TYPE_E5(TMC2209)
- INVALID_TMC_ADDRESS(E5);
- #endif
- #undef INVALID_TMC_ADDRESS
-
- /**
- * TMC2208/2209 software UART and ENDSTOP_INTERRUPTS both use pin change interrupts (PCI)
- */
- #if HAS_TMC220x && !defined(TARGET_LPC1768) && ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && !( \
- defined(X_HARDWARE_SERIAL ) || defined(X2_HARDWARE_SERIAL) \
- || defined(Y_HARDWARE_SERIAL ) || defined(Y2_HARDWARE_SERIAL) \
- || defined(Z_HARDWARE_SERIAL ) || defined(Z2_HARDWARE_SERIAL) \
- || defined(Z3_HARDWARE_SERIAL) || defined(E0_HARDWARE_SERIAL) \
- || defined(E1_HARDWARE_SERIAL) || defined(E2_HARDWARE_SERIAL) \
- || defined(E3_HARDWARE_SERIAL) || defined(E4_HARDWARE_SERIAL) \
- || defined(E5_HARDWARE_SERIAL) )
- #error "Select hardware UART for TMC2208 to use both TMC2208 and ENDSTOP_INTERRUPTS_FEATURE."
- #endif
-
- /**
- * TMC2208/2209 software UART is only supported on AVR, LPC, STM32F1 and STM32F4
- */
- #if HAS_TMC220x && !defined(__AVR__) && !defined(TARGET_LPC1768) && !defined(TARGET_STM32F1) && !defined(TARGET_STM32F4) && !( \
- defined(X_HARDWARE_SERIAL ) || defined(X2_HARDWARE_SERIAL) \
- || defined(Y_HARDWARE_SERIAL ) || defined(Y2_HARDWARE_SERIAL) \
- || defined(Z_HARDWARE_SERIAL ) || defined(Z2_HARDWARE_SERIAL) \
- || defined(Z3_HARDWARE_SERIAL) || defined(E0_HARDWARE_SERIAL) \
- || defined(E1_HARDWARE_SERIAL) || defined(E2_HARDWARE_SERIAL) \
- || defined(E3_HARDWARE_SERIAL) || defined(E4_HARDWARE_SERIAL) \
- || defined(E5_HARDWARE_SERIAL) )
- #error "TMC2208 Software Serial is supported only on AVR, LPC1768, STM32F1 and STM32F4 platforms."
- #endif
-
- #if ENABLED(SENSORLESS_HOMING)
- // Require STEALTHCHOP for SENSORLESS_HOMING on DELTA as the transition from spreadCycle to stealthChop
- // is necessary in order to reset the stallGuard indication between the initial movement of all three
- // towers to +Z and the individual homing of each tower. This restriction can be removed once a means of
- // clearing the stallGuard activated status is found.
-
- // Stall detection DIAG = HIGH : TMC2209
- // Stall detection DIAG = LOW : TMC2130/TMC2160/TMC2660/TMC5130/TMC5160
- #define X_ENDSTOP_INVERTING !AXIS_DRIVER_TYPE(X,TMC2209)
- #define Y_ENDSTOP_INVERTING !AXIS_DRIVER_TYPE(Y,TMC2209)
- #define Z_ENDSTOP_INVERTING !AXIS_DRIVER_TYPE(Z,TMC2209)
-
- #if ENABLED(DELTA) && !BOTH(STEALTHCHOP_XY, STEALTHCHOP_Z)
- #error "SENSORLESS_HOMING on DELTA currently requires STEALTHCHOP_XY and STEALTHCHOP_Z."
- #elif X_SENSORLESS && X_HOME_DIR < 0 && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_XMIN)
- #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_XMIN (or ENDSTOPPULLUPS) when homing to X_MIN."
- #elif X_SENSORLESS && X_HOME_DIR > 0 && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_XMAX)
- #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_XMAX (or ENDSTOPPULLUPS) when homing to X_MAX."
- #elif Y_SENSORLESS && Y_HOME_DIR < 0 && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_YMIN)
- #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_YMIN (or ENDSTOPPULLUPS) when homing to Y_MIN."
- #elif Y_SENSORLESS && Y_HOME_DIR > 0 && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_YMAX)
- #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_YMAX (or ENDSTOPPULLUPS) when homing to Y_MAX."
- #elif Z_SENSORLESS && Z_HOME_DIR < 0 && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMIN)
- #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_ZMIN (or ENDSTOPPULLUPS) when homing to Z_MIN."
- #elif Z_SENSORLESS && Z_HOME_DIR > 0 && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMAX)
- #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_ZMAX (or ENDSTOPPULLUPS) when homing to Z_MAX."
- #elif X_SENSORLESS && X_HOME_DIR < 0 && X_MIN_ENDSTOP_INVERTING != X_ENDSTOP_INVERTING
- #if X_ENDSTOP_INVERTING
- #error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING = true when homing to X_MIN."
- #else
- #error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING = false when homing TMC2209 to X_MIN."
- #endif
- #elif X_SENSORLESS && X_HOME_DIR > 0 && X_MAX_ENDSTOP_INVERTING != X_ENDSTOP_INVERTING
- #if X_ENDSTOP_INVERTING
- #error "SENSORLESS_HOMING requires X_MAX_ENDSTOP_INVERTING = true when homing to X_MAX."
- #else
- #error "SENSORLESS_HOMING requires X_MAX_ENDSTOP_INVERTING = false when homing TMC2209 to X_MAX."
- #endif
- #elif Y_SENSORLESS && Y_HOME_DIR < 0 && Y_MIN_ENDSTOP_INVERTING != Y_ENDSTOP_INVERTING
- #if Y_ENDSTOP_INVERTING
- #error "SENSORLESS_HOMING requires Y_MIN_ENDSTOP_INVERTING = true when homing to Y_MIN."
- #else
- #error "SENSORLESS_HOMING requires Y_MIN_ENDSTOP_INVERTING = false when homing TMC2209 to Y_MIN."
- #endif
- #elif Y_SENSORLESS && Y_HOME_DIR > 0 && Y_MAX_ENDSTOP_INVERTING != Y_ENDSTOP_INVERTING
- #if Y_ENDSTOP_INVERTING
- #error "SENSORLESS_HOMING requires Y_MAX_ENDSTOP_INVERTING = true when homing to Y_MAX."
- #else
- #error "SENSORLESS_HOMING requires Y_MAX_ENDSTOP_INVERTING = false when homing TMC2209 to Y_MAX."
- #endif
- #elif Z_SENSORLESS && Z_HOME_DIR < 0 && Z_MIN_ENDSTOP_INVERTING != Z_ENDSTOP_INVERTING
- #if Z_ENDSTOP_INVERTING
- #error "SENSORLESS_HOMING requires Z_MIN_ENDSTOP_INVERTING = true when homing to Z_MIN."
- #else
- #error "SENSORLESS_HOMING requires Z_MIN_ENDSTOP_INVERTING = false when homing TMC2209 to Z_MIN."
- #endif
- #elif Z_SENSORLESS && Z_HOME_DIR > 0 && Z_MAX_ENDSTOP_INVERTING != Z_ENDSTOP_INVERTING
- #if Z_ENDSTOP_INVERTING
- #error "SENSORLESS_HOMING requires Z_MAX_ENDSTOP_INVERTING = true when homing to Z_MAX."
- #else
- #error "SENSORLESS_HOMING requires Z_MAX_ENDSTOP_INVERTING = false when homing TMC2209 to Z_MAX."
- #endif
- #elif ENDSTOP_NOISE_THRESHOLD
- #error "SENSORLESS_HOMING is incompatible with ENDSTOP_NOISE_THRESHOLD."
- #elif !(X_SENSORLESS || Y_SENSORLESS || Z_SENSORLESS)
- #error "SENSORLESS_HOMING requires a TMC stepper driver with StallGuard on X, Y, or Z axes."
- #endif
-
- #undef X_ENDSTOP_INVERTING
- #undef Y_ENDSTOP_INVERTING
- #undef Z_ENDSTOP_INVERTING
- #endif
-
- // Sensorless probing requirements
- #if ENABLED(SENSORLESS_PROBING)
- #if ENABLED(DELTA) && !(X_SENSORLESS && Y_SENSORLESS && Z_SENSORLESS)
- #error "SENSORLESS_PROBING for DELTA requires TMC stepper drivers with StallGuard on X, Y, and Z axes."
- #elif !Z_SENSORLESS
- #error "SENSORLESS_PROBING requires a TMC stepper driver with StallGuard on Z."
- #endif
- #endif
-
- // Sensorless homing is required for both combined steppers in an H-bot
- #if CORE_IS_XY && X_SENSORLESS != Y_SENSORLESS
- #error "CoreXY requires both X and Y to use sensorless homing if either does."
- #elif CORE_IS_XZ && X_SENSORLESS != Z_SENSORLESS
- #error "CoreXZ requires both X and Z to use sensorless homing if either does."
- #elif CORE_IS_YZ && Y_SENSORLESS != Z_SENSORLESS
- #error "CoreYZ requires both Y and Z to use sensorless homing if either does."
- #endif
-
- // Other TMC feature requirements
- #if ENABLED(HYBRID_THRESHOLD) && !STEALTHCHOP_ENABLED
- #error "Enable STEALTHCHOP_(XY|Z|E) to use HYBRID_THRESHOLD."
- #elif ENABLED(SENSORLESS_HOMING) && !HAS_STALLGUARD
- #error "SENSORLESS_HOMING requires TMC2130, TMC2160, TMC2209, TMC2660, or TMC5160 stepper drivers."
- #elif ENABLED(SENSORLESS_PROBING) && !HAS_STALLGUARD
- #error "SENSORLESS_PROBING requires TMC2130, TMC2160, TMC2209, TMC2660, or TMC5160 stepper drivers."
- #elif STEALTHCHOP_ENABLED && !HAS_STEALTHCHOP
- #error "STEALTHCHOP requires TMC2130, TMC2160, TMC2208, TMC2209, or TMC5160 stepper drivers."
- #endif
-
- #define IN_CHAIN(A) (A##_CHAIN_POS > 0)
- // TMC SPI Chaining
- #if IN_CHAIN(X) || IN_CHAIN(Y) || IN_CHAIN(Z) || IN_CHAIN(X2) || IN_CHAIN(Y2) || IN_CHAIN(Z2) || IN_CHAIN(Z3) || IN_CHAIN(E0) || IN_CHAIN(E1) || IN_CHAIN(E2) || IN_CHAIN(E3) || IN_CHAIN(E4) || IN_CHAIN(E5)
- #if (IN_CHAIN(X) && !PIN_EXISTS(X_CS) ) || (IN_CHAIN(Y) && !PIN_EXISTS(Y_CS) ) \
- || (IN_CHAIN(Z) && !PIN_EXISTS(Z_CS) ) || (IN_CHAIN(X2) && !PIN_EXISTS(X2_CS)) \
- || (IN_CHAIN(Y2) && !PIN_EXISTS(Y2_CS)) || (IN_CHAIN(Z2) && !PIN_EXISTS(Z2_CS)) \
- || (IN_CHAIN(Z3) && !PIN_EXISTS(Z3_CS)) || (IN_CHAIN(E0) && !PIN_EXISTS(E0_CS)) \
- || (IN_CHAIN(E1) && !PIN_EXISTS(E1_CS)) || (IN_CHAIN(E2) && !PIN_EXISTS(E2_CS)) \
- || (IN_CHAIN(E3) && !PIN_EXISTS(E3_CS)) || (IN_CHAIN(E4) && !PIN_EXISTS(E4_CS)) \
- || (IN_CHAIN(E5) && !PIN_EXISTS(E5_CS))
- #error "All chained TMC drivers need a CS pin."
- #else
- #if IN_CHAIN(X)
- #define CS_COMPARE X_CS_PIN
- #elif IN_CHAIN(Y)
- #define CS_COMPARE Y_CS_PIN
- #elif IN_CHAIN(Z)
- #define CS_COMPARE Z_CS_PIN
- #elif IN_CHAIN(X2)
- #define CS_COMPARE X2_CS_PIN
- #elif IN_CHAIN(Y2)
- #define CS_COMPARE Y2_CS_PIN
- #elif IN_CHAIN(Z2)
- #define CS_COMPARE Z2_CS_PIN
- #elif IN_CHAIN(Z3)
- #define CS_COMPARE Z3_CS_PIN
- #elif IN_CHAIN(E0)
- #define CS_COMPARE E0_CS_PIN
- #elif IN_CHAIN(E1)
- #define CS_COMPARE E1_CS_PIN
- #elif IN_CHAIN(E2)
- #define CS_COMPARE E2_CS_PIN
- #elif IN_CHAIN(E3)
- #define CS_COMPARE E3_CS_PIN
- #elif IN_CHAIN(E4)
- #define CS_COMPARE E4_CS_PIN
- #elif IN_CHAIN(E5)
- #define CS_COMPARE E5_CS_PIN
- #endif
- #if (IN_CHAIN(X) && X_CS_PIN != CS_COMPARE) || (IN_CHAIN(Y) && Y_CS_PIN != CS_COMPARE) \
- || (IN_CHAIN(Z) && Z_CS_PIN != CS_COMPARE) || (IN_CHAIN(X2) && X2_CS_PIN != CS_COMPARE) \
- || (IN_CHAIN(Y2) && Y2_CS_PIN != CS_COMPARE) || (IN_CHAIN(Z2) && Z2_CS_PIN != CS_COMPARE) \
- || (IN_CHAIN(Z3) && Z3_CS_PIN != CS_COMPARE) || (IN_CHAIN(E0) && E0_CS_PIN != CS_COMPARE) \
- || (IN_CHAIN(E1) && E1_CS_PIN != CS_COMPARE) || (IN_CHAIN(E2) && E2_CS_PIN != CS_COMPARE) \
- || (IN_CHAIN(E3) && E3_CS_PIN != CS_COMPARE) || (IN_CHAIN(E4) && E4_CS_PIN != CS_COMPARE) \
- || (IN_CHAIN(E5) && E5_CS_PIN != CS_COMPARE)
- #error "All chained TMC drivers must use the same CS pin."
- #endif
- #endif
- #undef CS_COMPARE
- #endif
- #undef IN_CHAIN
-
- #if ENABLED(DELTA) && (ENABLED(STEALTHCHOP_XY) != ENABLED(STEALTHCHOP_Z))
- #error "STEALTHCHOP_XY and STEALTHCHOP_Z must be the same on DELTA."
- #endif
-
- /**
- * Digipot requirement
- */
- #if ENABLED(DIGIPOT_MCP4018)
- #if !defined(DIGIPOTS_I2C_SDA_X) || !defined(DIGIPOTS_I2C_SDA_Y) || !defined(DIGIPOTS_I2C_SDA_Z) \
- || !defined(DIGIPOTS_I2C_SDA_E0) || !defined(DIGIPOTS_I2C_SDA_E1)
- #error "DIGIPOT_MCP4018 requires DIGIPOTS_I2C_SDA_* pins to be defined."
- #endif
- #endif
-
- /**
- * Check per-axis initializers for errors
- */
- constexpr float sanity_arr_1[] = DEFAULT_AXIS_STEPS_PER_UNIT,
- sanity_arr_2[] = DEFAULT_MAX_FEEDRATE,
- sanity_arr_3[] = DEFAULT_MAX_ACCELERATION;
-
- #define _ARR_TEST(N,I) (sanity_arr_##N[_MIN(I,int(COUNT(sanity_arr_##N))-1)] > 0)
-
- static_assert(COUNT(sanity_arr_1) >= XYZE, "DEFAULT_AXIS_STEPS_PER_UNIT requires X, Y, Z and E elements.");
- static_assert(COUNT(sanity_arr_1) <= XYZE_N, "DEFAULT_AXIS_STEPS_PER_UNIT has too many elements. (Did you forget to enable DISTINCT_E_FACTORS?)");
- static_assert( _ARR_TEST(1,0) && _ARR_TEST(1,1) && _ARR_TEST(1,2)
- && _ARR_TEST(1,3) && _ARR_TEST(1,4) && _ARR_TEST(1,5)
- && _ARR_TEST(1,6) && _ARR_TEST(1,7) && _ARR_TEST(1,8),
- "DEFAULT_AXIS_STEPS_PER_UNIT values must be positive.");
-
- static_assert(COUNT(sanity_arr_2) >= XYZE, "DEFAULT_MAX_FEEDRATE requires X, Y, Z and E elements.");
- static_assert(COUNT(sanity_arr_2) <= XYZE_N, "DEFAULT_MAX_FEEDRATE has too many elements. (Did you forget to enable DISTINCT_E_FACTORS?)");
- static_assert( _ARR_TEST(2,0) && _ARR_TEST(2,1) && _ARR_TEST(2,2)
- && _ARR_TEST(2,3) && _ARR_TEST(2,4) && _ARR_TEST(2,5)
- && _ARR_TEST(2,6) && _ARR_TEST(2,7) && _ARR_TEST(2,8),
- "DEFAULT_MAX_FEEDRATE values must be positive.");
-
- static_assert(COUNT(sanity_arr_3) >= XYZE, "DEFAULT_MAX_ACCELERATION requires X, Y, Z and E elements.");
- static_assert(COUNT(sanity_arr_3) <= XYZE_N, "DEFAULT_MAX_ACCELERATION has too many elements. (Did you forget to enable DISTINCT_E_FACTORS?)");
- static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
- && _ARR_TEST(3,3) && _ARR_TEST(3,4) && _ARR_TEST(3,5)
- && _ARR_TEST(3,6) && _ARR_TEST(3,7) && _ARR_TEST(3,8),
- "DEFAULT_MAX_ACCELERATION values must be positive.");
-
- #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
- #ifdef MAX_ACCEL_EDIT_VALUES
- constexpr float sanity_arr_4[] = MAX_ACCEL_EDIT_VALUES;
- static_assert(COUNT(sanity_arr_4) >= XYZE, "MAX_ACCEL_EDIT_VALUES requires X, Y, Z and E elements.");
- static_assert(COUNT(sanity_arr_4) <= XYZE, "MAX_ACCEL_EDIT_VALUES has too many elements. X, Y, Z and E elements only.");
- static_assert( _ARR_TEST(4,0) && _ARR_TEST(4,1) && _ARR_TEST(4,2)
- && _ARR_TEST(4,3) && _ARR_TEST(4,4) && _ARR_TEST(4,5)
- && _ARR_TEST(4,6) && _ARR_TEST(4,7) && _ARR_TEST(4,8),
- "MAX_ACCEL_EDIT_VALUES values must be positive.");
- #endif
- #endif
-
- #if ENABLED(LIMITED_MAX_FR_EDITING)
- #ifdef MAX_FEEDRATE_EDIT_VALUES
- constexpr float sanity_arr_5[] = MAX_FEEDRATE_EDIT_VALUES;
- static_assert(COUNT(sanity_arr_5) >= XYZE, "MAX_FEEDRATE_EDIT_VALUES requires X, Y, Z and E elements.");
- static_assert(COUNT(sanity_arr_5) <= XYZE, "MAX_FEEDRATE_EDIT_VALUES has too many elements. X, Y, Z and E elements only.");
- static_assert( _ARR_TEST(5,0) && _ARR_TEST(5,1) && _ARR_TEST(5,2)
- && _ARR_TEST(5,3) && _ARR_TEST(5,4) && _ARR_TEST(5,5)
- && _ARR_TEST(5,6) && _ARR_TEST(5,7) && _ARR_TEST(5,8),
- "MAX_FEEDRATE_EDIT_VALUES values must be positive.");
- #endif
- #endif
-
- #if ENABLED(LIMITED_JERK_EDITING)
- #ifdef MAX_JERK_EDIT_VALUES
- constexpr float sanity_arr_6[] = MAX_JERK_EDIT_VALUES;
- static_assert(COUNT(sanity_arr_6) >= XYZE, "MAX_JERK_EDIT_VALUES requires X, Y, Z and E elements.");
- static_assert(COUNT(sanity_arr_6) <= XYZE, "MAX_JERK_EDIT_VALUES has too many elements. X, Y, Z and E elements only.");
- static_assert( _ARR_TEST(6,0) && _ARR_TEST(6,1) && _ARR_TEST(6,2)
- && _ARR_TEST(6,3) && _ARR_TEST(6,4) && _ARR_TEST(6,5)
- && _ARR_TEST(6,6) && _ARR_TEST(6,7) && _ARR_TEST(6,8),
- "MAX_JERK_EDIT_VALUES values must be positive.");
- #endif
- #endif
-
- #undef _ARR_TEST
-
- #if BOTH(CNC_COORDINATE_SYSTEMS, NO_WORKSPACE_OFFSETS)
- #error "CNC_COORDINATE_SYSTEMS is incompatible with NO_WORKSPACE_OFFSETS."
- #endif
-
- #if !BLOCK_BUFFER_SIZE || !IS_POWER_OF_2(BLOCK_BUFFER_SIZE)
- #error "BLOCK_BUFFER_SIZE must be a power of 2."
- #endif
-
- #if ENABLED(LED_CONTROL_MENU) && DISABLED(ULTIPANEL)
- #error "LED_CONTROL_MENU requires an LCD controller."
- #endif
-
- #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) && DISABLED(NEOPIXEL_LED)
- #error "CASE_LIGHT_USE_NEOPIXEL requires NEOPIXEL_LED."
- #endif
-
- #if ENABLED(SKEW_CORRECTION)
- #if !defined(XY_SKEW_FACTOR) && !(defined(XY_DIAG_AC) && defined(XY_DIAG_BD) && defined(XY_SIDE_AD))
- #error "SKEW_CORRECTION requires XY_SKEW_FACTOR or XY_DIAG_AC, XY_DIAG_BD, XY_SIDE_AD."
- #endif
- #if ENABLED(SKEW_CORRECTION_FOR_Z)
- #if !defined(XZ_SKEW_FACTOR) && !(defined(XZ_DIAG_AC) && defined(XZ_DIAG_BD) && defined(XZ_SIDE_AD))
- #error "SKEW_CORRECTION requires XZ_SKEW_FACTOR or XZ_DIAG_AC, XZ_DIAG_BD, XZ_SIDE_AD."
- #endif
- #if !defined(YZ_SKEW_FACTOR) && !(defined(YZ_DIAG_AC) && defined(YZ_DIAG_BD) && defined(YZ_SIDE_AD))
- #error "SKEW_CORRECTION requires YZ_SKEW_FACTOR or YZ_DIAG_AC, YZ_DIAG_BD, YZ_SIDE_AD."
- #endif
- #endif
- #endif
-
- #if ENABLED(BACKUP_POWER_SUPPLY) && !PIN_EXISTS(POWER_LOSS)
- #error "BACKUP_POWER_SUPPLY requires a POWER_LOSS_PIN."
- #endif
-
- #if ENABLED(Z_STEPPER_AUTO_ALIGN)
- #if !Z_MULTI_STEPPER_DRIVERS
- #error "Z_STEPPER_AUTO_ALIGN requires Z_DUAL_STEPPER_DRIVERS or Z_TRIPLE_STEPPER_DRIVERS."
- #elif !HAS_BED_PROBE
- #error "Z_STEPPER_AUTO_ALIGN requires a Z-bed probe."
- #elif ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) && DISABLED(Z_TRIPLE_STEPPER_DRIVERS)
- #error "Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS requires Z_TRIPLE_STEPPER_DRIVERS."
- #endif
- #endif
-
- #if ENABLED(PRINTCOUNTER) && DISABLED(EEPROM_SETTINGS)
- #error "PRINTCOUNTER requires EEPROM_SETTINGS. Please update your Configuration."
- #endif
-
- #if ENABLED(USB_FLASH_DRIVE_SUPPORT) && !PIN_EXISTS(USB_CS, USB_INTR)
- #error "USB_CS_PIN and USB_INTR_PIN are required for USB_FLASH_DRIVE_SUPPORT."
- #endif
-
- #if ENABLED(SD_FIRMWARE_UPDATE) && !defined(__AVR_ATmega2560__)
- #error "SD_FIRMWARE_UPDATE requires an ATmega2560-based (Arduino Mega) board."
- #endif
-
- #if ENABLED(GCODE_MACROS) && !WITHIN(GCODE_MACROS_SLOTS, 1, 10)
- #error "GCODE_MACROS_SLOTS must be a number from 1 to 10."
- #endif
-
- #if ENABLED(CUSTOM_USER_MENUS)
- #ifdef USER_GCODE_1
- constexpr char _chr1 = USER_GCODE_1[strlen(USER_GCODE_1) - 1];
- static_assert(_chr1 != '\n' && _chr1 != '\r', "USER_GCODE_1 cannot have a newline at the end. Please remove it.");
- #endif
- #ifdef USER_GCODE_2
- constexpr char _chr2 = USER_GCODE_2[strlen(USER_GCODE_2) - 1];
- static_assert(_chr2 != '\n' && _chr2 != '\r', "USER_GCODE_2 cannot have a newline at the end. Please remove it.");
- #endif
- #ifdef USER_GCODE_3
- constexpr char _chr3 = USER_GCODE_3[strlen(USER_GCODE_3) - 1];
- static_assert(_chr3 != '\n' && _chr3 != '\r', "USER_GCODE_3 cannot have a newline at the end. Please remove it.");
- #endif
- #ifdef USER_GCODE_4
- constexpr char _chr4 = USER_GCODE_4[strlen(USER_GCODE_4) - 1];
- static_assert(_chr4 != '\n' && _chr4 != '\r', "USER_GCODE_4 cannot have a newline at the end. Please remove it.");
- #endif
- #ifdef USER_GCODE_5
- constexpr char _chr5 = USER_GCODE_5[strlen(USER_GCODE_5) - 1];
- static_assert(_chr5 != '\n' && _chr5 != '\r', "USER_GCODE_5 cannot have a newline at the end. Please remove it.");
- #endif
- #endif
-
- #if ENABLED(BACKLASH_COMPENSATION)
- #if IS_CORE
- #error "BACKLASH_COMPENSATION is incompatible with CORE kinematics."
- #endif
- #ifndef BACKLASH_DISTANCE_MM
- #error "BACKLASH_COMPENSATION requires BACKLASH_DISTANCE_MM"
- #endif
- #ifndef BACKLASH_CORRECTION
- #error "BACKLASH_COMPENSATION requires BACKLASH_CORRECTION"
- #endif
- #endif
-
- #if ENABLED(GRADIENT_MIX) && MIXING_VIRTUAL_TOOLS < 2
- #error "GRADIENT_MIX requires 2 or more MIXING_VIRTUAL_TOOLS."
- #endif
-
- /**
- * Photo G-code requirements
- */
- #if ENABLED(PHOTO_GCODE)
- #if (PIN_EXISTS(CHDK) + PIN_EXISTS(PHOTOGRAPH) + defined(PHOTO_SWITCH_POSITION)) > 1
- #error "Please define only one of CHDK_PIN, PHOTOGRAPH_PIN, or PHOTO_SWITCH_POSITION."
- #elif defined(PHOTO_SWITCH_POSITION) && !defined(PHOTO_POSITION)
- #error "PHOTO_SWITCH_POSITION requires PHOTO_POSITION. Please update your Configuration_adv.h."
- #elif PIN_EXISTS(CHDK) && defined(CHDK_DELAY)
- #error "CHDK_DELAY has been replaced by PHOTO_SWITCH_MS. Please update your Configuration_adv.h."
- #elif PIN_EXISTS(CHDK) && !defined(PHOTO_SWITCH_MS)
- #error "PHOTO_SWITCH_MS is required with CHDK_PIN. Please update your Configuration_adv.h."
- #elif defined(PHOTO_RETRACT_MM)
- static_assert(PHOTO_RETRACT_MM + 0 >= 0, "PHOTO_RETRACT_MM must be >= 0.");
- #endif
- #endif
-
- /**
- * Prusa MMU2 requirements
- */
- #if ENABLED(PRUSA_MMU2)
- #if DISABLED(NOZZLE_PARK_FEATURE)
- #error "PRUSA_MMU2 requires NOZZLE_PARK_FEATURE."
- #elif EXTRUDERS != 5
- #error "PRUSA_MMU2 requires EXTRUDERS = 5."
- #elif DISABLED(ADVANCED_PAUSE_FEATURE)
- static_assert(nullptr == strstr(MMU2_FILAMENT_RUNOUT_SCRIPT, "M600"), "ADVANCED_PAUSE_FEATURE is required to use M600 with PRUSA_MMU2.");
- #endif
- #endif
-
- /**
- * Advanced PRINTCOUNTER settings
- */
- #if ENABLED(PRINTCOUNTER)
- #if defined(SERVICE_INTERVAL_1) != defined(SERVICE_NAME_1)
- #error "Both SERVICE_NAME_1 and SERVICE_INTERVAL_1 are required."
- #elif defined(SERVICE_INTERVAL_2) != defined(SERVICE_NAME_2)
- #error "Both SERVICE_NAME_2 and SERVICE_INTERVAL_2 are required."
- #elif defined(SERVICE_INTERVAL_3) != defined(SERVICE_NAME_3)
- #error "Both SERVICE_NAME_3 and SERVICE_INTERVAL_3 are required."
- #endif
- #endif
-
- /**
- * Require soft endstops for certain setups
- */
- #if !BOTH(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
- #if ENABLED(DUAL_X_CARRIAGE)
- #error "DUAL_X_CARRIAGE requires both MIN_ and MAX_SOFTWARE_ENDSTOPS."
- #elif HAS_HOTEND_OFFSET
- #error "MIN_ and MAX_SOFTWARE_ENDSTOPS are both required with offset hotends."
- #endif
- #endif
-
- /**
- * Ensure this option is set intentionally
- */
- #if ENABLED(PSU_CONTROL)
- #ifndef PSU_ACTIVE_HIGH
- #error "PSU_CONTROL requires PSU_ACTIVE_HIGH to be defined as 'true' or 'false'."
- #elif !PIN_EXISTS(PS_ON)
- #error "PSU_CONTROL requires PS_ON_PIN."
- #endif
- #elif ENABLED(AUTO_POWER_CONTROL)
- #error "AUTO_POWER_CONTROL requires PSU_CONTROL."
- #endif
-
- #if HAS_CUTTER
- #define _PIN_CONFLICT(P) (PIN_EXISTS(P) && P##_PIN == SPINDLE_LASER_PWM_PIN)
- #if BOTH(SPINDLE_FEATURE, LASER_FEATURE)
- #error "Enable only one of SPINDLE_FEATURE or LASER_FEATURE."
- #elif !PIN_EXISTS(SPINDLE_LASER_ENA)
- #error "(SPINDLE|LASER)_FEATURE requires SPINDLE_LASER_ENA_PIN."
- #elif ENABLED(SPINDLE_CHANGE_DIR) && !PIN_EXISTS(SPINDLE_DIR)
- #error "SPINDLE_DIR_PIN is required for SPINDLE_CHANGE_DIR."
- #elif ENABLED(SPINDLE_LASER_PWM)
- #if !defined(SPINDLE_LASER_PWM_PIN) || SPINDLE_LASER_PWM_PIN < 0
- #error "SPINDLE_LASER_PWM_PIN is required for SPINDLE_LASER_PWM."
- #elif !PWM_PIN(SPINDLE_LASER_PWM_PIN)
- #error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin."
- #elif SPINDLE_LASER_POWERUP_DELAY < 1
- #error "SPINDLE_LASER_POWERUP_DELAY must be greater than 0."
- #elif SPINDLE_LASER_POWERDOWN_DELAY < 1
- #error "SPINDLE_LASER_POWERDOWN_DELAY must be greater than 0."
- #elif !defined(SPINDLE_LASER_PWM_INVERT)
- #error "SPINDLE_LASER_PWM_INVERT is required for (SPINDLE|LASER)_FEATURE."
- #elif !defined(SPEED_POWER_SLOPE) || !defined(SPEED_POWER_INTERCEPT) || !defined(SPEED_POWER_MIN) || !defined(SPEED_POWER_MAX)
- #error "SPINDLE_LASER_PWM equation constant(s) missing."
- #elif _PIN_CONFLICT(X_MIN)
- #error "SPINDLE_LASER_PWM pin conflicts with X_MIN_PIN."
- #elif _PIN_CONFLICT(X_MAX)
- #error "SPINDLE_LASER_PWM pin conflicts with X_MAX_PIN."
- #elif _PIN_CONFLICT(Z_STEP)
- #error "SPINDLE_LASER_PWM pin conflicts with Z_STEP_PIN."
- #elif _PIN_CONFLICT(CASE_LIGHT)
- #error "SPINDLE_LASER_PWM_PIN conflicts with CASE_LIGHT_PIN."
- #elif _PIN_CONFLICT(E0_AUTO_FAN)
- #error "SPINDLE_LASER_PWM_PIN conflicts with E0_AUTO_FAN_PIN."
- #elif _PIN_CONFLICT(E1_AUTO_FAN)
- #error "SPINDLE_LASER_PWM_PIN conflicts with E1_AUTO_FAN_PIN."
- #elif _PIN_CONFLICT(E2_AUTO_FAN)
- #error "SPINDLE_LASER_PWM_PIN conflicts with E2_AUTO_FAN_PIN."
- #elif _PIN_CONFLICT(E3_AUTO_FAN)
- #error "SPINDLE_LASER_PWM_PIN conflicts with E3_AUTO_FAN_PIN."
- #elif _PIN_CONFLICT(E4_AUTO_FAN)
- #error "SPINDLE_LASER_PWM_PIN conflicts with E4_AUTO_FAN_PIN."
- #elif _PIN_CONFLICT(E5_AUTO_FAN)
- #error "SPINDLE_LASER_PWM_PIN conflicts with E5_AUTO_FAN_PIN."
- #elif _PIN_CONFLICT(FAN)
- #error "SPINDLE_LASER_PWM_PIN conflicts with FAN_PIN."
- #elif _PIN_CONFLICT(FAN1)
- #error "SPINDLE_LASER_PWM_PIN conflicts with FAN1_PIN."
- #elif _PIN_CONFLICT(FAN2)
- #error "SPINDLE_LASER_PWM_PIN conflicts with FAN2_PIN."
- #elif _PIN_CONFLICT(CONTROLLERFAN)
- #error "SPINDLE_LASER_PWM_PIN conflicts with CONTROLLERFAN_PIN."
- #elif _PIN_CONFLICT(MOTOR_CURRENT_PWM_XY)
- #error "SPINDLE_LASER_PWM_PIN conflicts with MOTOR_CURRENT_PWM_XY."
- #elif _PIN_CONFLICT(MOTOR_CURRENT_PWM_Z)
- #error "SPINDLE_LASER_PWM_PIN conflicts with MOTOR_CURRENT_PWM_Z."
- #elif _PIN_CONFLICT(MOTOR_CURRENT_PWM_E)
- #error "SPINDLE_LASER_PWM_PIN conflicts with MOTOR_CURRENT_PWM_E."
- #endif
- #endif
- #undef _PIN_CONFLICT
- #endif
-
- #if !HAS_GRAPHICAL_LCD
- #if ENABLED(PRINT_PROGRESS_SHOW_DECIMALS)
- #error "PRINT_PROGRESS_SHOW_DECIMALS currently requires a Graphical LCD."
- #elif ENABLED(SHOW_REMAINING_TIME)
- #error "SHOW_REMAINING_TIME currently requires a Graphical LCD."
- #endif
- #endif
-
- #if ENABLED(LIN_ADVANCE) && MINIMUM_STEPPER_PULSE < 1
- #if HAS_TMC_STANDALONE_E_DRIVER
- #error "LIN_ADVANCE with TMC standalone driver on extruder requires MIMIMUM_STEPPER_PULSE >= 1"
- #elif HAS_TMC_E_DRIVER && DISABLED(SQUARE_WAVE_STEPPING)
- #error "LIN_ADVANCE with TMC driver on extruder requires SQUARE_WAVE_STEPPING or MINIMUM_STEPPER_PULSE >= 1"
- #endif
- #endif
|