123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * MKS BASE v1.4 with A4982 stepper drivers and digital micro-stepping
- */
-
- #if HOTENDS > 2 || E_STEPPERS > 2
- #error "MKS BASE 1.4 only supports up to 2 hotends / E-steppers. Comment out this line to continue."
- #endif
-
- #define BOARD_INFO_NAME "MKS BASE 1.4"
- #define MKS_BASE_VERSION 14
-
- //
- // Heaters / Fans
- //
- #define FAN_PIN 9 // PH6 ** Pin18 ** PWM9
-
- // Other Mods
- #define CASE_LIGHT_PIN 11 // PB5 ** Pin24 ** PWM11
- #define SERVO3_PIN 12 // PB6 ** Pin25 ** D12
- #define PS_ON_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM
- #define FILWIDTH_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup!
- #define FIL_RUNOUT_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX
-
- #ifndef RGB_LED_R_PIN
- #define RGB_LED_R_PIN 50
- #endif
- #ifndef RGB_LED_R_PIN
- #define RGB_LED_G_PIN 51
- #endif
- #ifndef RGB_LED_R_PIN
- #define RGB_LED_B_PIN 52
- #endif
-
- #include "pins_MKS_BASE_common.h"
-
- /*
- Available connectors on MKS BASE v1.4
-
- =======
- | GND |
- |-----| E0
- | 10 | (10) PB4 ** Pin23 ** PWM10
- |-----|
- | GND |
- |-----| E1
- | 7 | ( 7) PH4 ** Pin16 ** PWM7
- |-----|
- | GND |
- |-----| FAN
- | 9 | ( 9) PH6 ** Pin18 ** PWM9
- =======
-
- =======
- | GND |
- |-----| Heated Bed
- | 8 | ( 8) PH5 ** Pin17 ** PWM8
- =======
-
- ==========
- | 12-24V |
- |--------| Power
- | GND |
- ==========
-
- XS3 Connector
- =================
- | 65 | GND | 5V | (65) PK3 ** Pin86 ** A11
- |----|-----|----|
- | 66 | GND | 5V | (66) PK4 ** Pin85 ** A12
- =================
-
- Servos Connector
- =================
- | 11 | GND | 5V | (11) PB5 ** Pin24 ** PWM11
- |----|-----|----|
- | 12 | GND | 5V | (12) PB6 ** Pin25 ** PWM12
- =================
-
- ICSP
- =================
- | 5V | 51 | GND | (51) PB2 ** Pin21 ** SPI_MOSI
- |----|----|-----|
- | 50 | 52 | RST | (50) PB3 ** Pin22 ** SPI_MISO
- ================= (52) PB1 ** Pin20 ** SPI_SCK
-
- XS6/AUX-1 Connector
- ======================
- | 5V | GND | NC | 20 | (20) PD1 ** Pin44 ** I2C_SDA
- |----|-----|----|----|
- | 50 | 51 | 52 | 21 | (50) PB3 ** Pin22 ** SPI_MISO
- ====================== (51) PB2 ** Pin21 ** SPI_MOSI
- (52) PB1 ** Pin20 ** SPI_SCK
- (21) PD0 ** Pin43 ** I2C_SCL
-
- Temperature
- ==================================
- | GND | 69 | GND | 68 | GND | 67 |
- ==================================
- (69) PK7 ** Pin82 ** A15
- (68) PK6 ** Pin83 ** A14
- (67) PK5 ** Pin84 ** A13
-
- Limit Switches
- ============
- | 2 | GND | X+ ( 2) PE4 ** Pin6 ** PWM2
- |----|-----|
- | 3 | GND | X- ( 3) PE5 ** Pin7 ** PWM3
- |----|-----|
- | 15 | GND | Y+ (15) PJ0 ** Pin63 ** USART3_RX
- |----|-----|
- | 14 | GND | Y- (14) PJ1 ** Pin64 ** USART3_TX
- |----|-----|
- | 19 | GND | Z+ (19) PD2 ** Pin45 ** USART1_RX
- |----|-----|
- | 18 | GND | Z- (18) PD3 ** Pin46 ** USART1_TX
- ============
-
- EXP1
- ============
- | 37 | 35 | (37) PC0 ** Pin53 ** D37
- |-----|----| (35) PC2 ** Pin55 ** D35
- | 17 | 16 | (17) PH0 ** Pin12 ** USART2_RX
- |-----|----| (16) PH1 ** Pin13 ** USART2_TX
- | 23 | 25 | (23) PA1 ** Pin77 ** D23
- |-----|----| (25) PA3 ** Pin75 ** D25
- | 27 | 29 | (27) PA5 ** Pin73 ** D27
- |-----|----| (29) PA7 ** Pin71 ** D29
- | GND | 5V |
- ============
-
- EXP2
- ============
- | 50 | 52 | (50) PB3 ** Pin22 ** SPI_MISO
- |-----|----| (52) PB1 ** Pin20 ** SPI_SCK
- | 31 | 53 | (31) PC6 ** Pin59 ** D31
- |-----|----| (53) PB0 ** Pin19 ** SPI_SS
- | 33 | 51 | (33) PC4 ** Pin57 ** D33
- |-----|----| (51) PB2 ** Pin21 ** SPI_MOSI
- | 49 | 41 | (49) PL0 ** Pin35 ** D49
- |-----|----| (41) PG0 ** Pin51 ** D41
- | GND | NC |
- ============
- */
|