My Marlin configs for Fabrikator Mini and CTC i3 Pro B
您最多选择25个主题 主题必须以字母或数字开头,可以包含连字符 (-),并且长度不得超过35个字符

Configuration_adv.h 115KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621162216231624162516261627162816291630163116321633163416351636163716381639164016411642164316441645164616471648164916501651165216531654165516561657165816591660166116621663166416651666166716681669167016711672167316741675167616771678167916801681168216831684168516861687168816891690169116921693169416951696169716981699170017011702170317041705170617071708170917101711171217131714171517161717171817191720172117221723172417251726172717281729173017311732173317341735173617371738173917401741174217431744174517461747174817491750175117521753175417551756175717581759176017611762176317641765176617671768176917701771177217731774177517761777177817791780178117821783178417851786178717881789179017911792179317941795179617971798179918001801180218031804180518061807180818091810181118121813181418151816181718181819182018211822182318241825182618271828182918301831183218331834183518361837183818391840184118421843184418451846184718481849185018511852185318541855185618571858185918601861186218631864186518661867186818691870187118721873187418751876187718781879188018811882188318841885188618871888188918901891189218931894189518961897189818991900190119021903190419051906190719081909191019111912191319141915191619171918191919201921192219231924192519261927192819291930193119321933193419351936193719381939194019411942194319441945194619471948194919501951195219531954195519561957195819591960196119621963196419651966196719681969197019711972197319741975197619771978197919801981198219831984198519861987198819891990199119921993199419951996199719981999200020012002200320042005200620072008200920102011201220132014201520162017201820192020202120222023202420252026202720282029203020312032203320342035203620372038203920402041204220432044204520462047204820492050205120522053205420552056205720582059206020612062206320642065206620672068206920702071207220732074207520762077207820792080208120822083208420852086208720882089209020912092209320942095209620972098209921002101210221032104210521062107210821092110211121122113211421152116211721182119212021212122212321242125212621272128212921302131213221332134213521362137213821392140214121422143214421452146214721482149215021512152215321542155215621572158215921602161216221632164216521662167216821692170217121722173217421752176217721782179218021812182218321842185218621872188218921902191219221932194219521962197219821992200220122022203220422052206220722082209221022112212221322142215221622172218221922202221222222232224222522262227222822292230223122322233223422352236223722382239224022412242224322442245224622472248224922502251225222532254225522562257225822592260226122622263226422652266226722682269227022712272227322742275227622772278227922802281228222832284228522862287228822892290229122922293229422952296229722982299230023012302230323042305230623072308230923102311231223132314231523162317231823192320232123222323232423252326232723282329233023312332233323342335233623372338233923402341234223432344234523462347234823492350235123522353235423552356235723582359236023612362236323642365236623672368236923702371237223732374237523762377237823792380238123822383238423852386238723882389239023912392239323942395239623972398239924002401240224032404240524062407240824092410241124122413241424152416241724182419242024212422242324242425242624272428242924302431243224332434243524362437243824392440244124422443244424452446244724482449245024512452245324542455245624572458245924602461246224632464246524662467246824692470247124722473247424752476247724782479248024812482248324842485248624872488248924902491249224932494249524962497249824992500250125022503250425052506250725082509251025112512251325142515251625172518251925202521252225232524252525262527252825292530253125322533253425352536253725382539254025412542254325442545254625472548254925502551255225532554255525562557255825592560256125622563256425652566256725682569257025712572257325742575257625772578257925802581258225832584258525862587258825892590259125922593259425952596259725982599260026012602260326042605260626072608260926102611261226132614261526162617261826192620262126222623262426252626262726282629263026312632263326342635263626372638263926402641264226432644264526462647264826492650265126522653265426552656265726582659266026612662266326642665266626672668266926702671267226732674267526762677267826792680268126822683268426852686268726882689269026912692269326942695269626972698269927002701270227032704270527062707270827092710271127122713271427152716271727182719272027212722272327242725272627272728272927302731273227332734273527362737273827392740274127422743274427452746274727482749275027512752275327542755275627572758275927602761276227632764276527662767276827692770277127722773277427752776277727782779278027812782278327842785278627872788278927902791279227932794279527962797279827992800280128022803280428052806280728082809281028112812281328142815281628172818281928202821282228232824282528262827282828292830283128322833283428352836283728382839284028412842284328442845284628472848284928502851285228532854285528562857285828592860286128622863286428652866286728682869287028712872287328742875287628772878287928802881288228832884288528862887288828892890289128922893289428952896289728982899290029012902290329042905290629072908290929102911291229132914291529162917291829192920292129222923292429252926292729282929293029312932293329342935
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. #pragma once
  23. /**
  24. * Configuration_adv.h
  25. *
  26. * Advanced settings.
  27. * Only change these if you know exactly what you're doing.
  28. * Some of these settings can damage your printer if improperly set!
  29. *
  30. * Basic settings can be found in Configuration.h
  31. *
  32. */
  33. #define CONFIGURATION_ADV_H_VERSION 020000
  34. // @section temperature
  35. //===========================================================================
  36. //=============================Thermal Settings ============================
  37. //===========================================================================
  38. //
  39. // Custom Thermistor 1000 parameters
  40. //
  41. #if TEMP_SENSOR_0 == 1000
  42. #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  43. #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  44. #define HOTEND0_BETA 3950 // Beta value
  45. #endif
  46. #if TEMP_SENSOR_1 == 1000
  47. #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  48. #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  49. #define HOTEND1_BETA 3950 // Beta value
  50. #endif
  51. #if TEMP_SENSOR_2 == 1000
  52. #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  53. #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  54. #define HOTEND2_BETA 3950 // Beta value
  55. #endif
  56. #if TEMP_SENSOR_3 == 1000
  57. #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  58. #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  59. #define HOTEND3_BETA 3950 // Beta value
  60. #endif
  61. #if TEMP_SENSOR_4 == 1000
  62. #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  63. #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  64. #define HOTEND4_BETA 3950 // Beta value
  65. #endif
  66. #if TEMP_SENSOR_5 == 1000
  67. #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  68. #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  69. #define HOTEND5_BETA 3950 // Beta value
  70. #endif
  71. #if TEMP_SENSOR_BED == 1000
  72. #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  73. #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  74. #define BED_BETA 3950 // Beta value
  75. #endif
  76. #if TEMP_SENSOR_CHAMBER == 1000
  77. #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  78. #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  79. #define CHAMBER_BETA 3950 // Beta value
  80. #endif
  81. #define HEATER_BED_INVERTING true
  82. #define HEATER_0_INVERTING true
  83. #define HEATER_1_INVERTING true
  84. //
  85. // Hephestos 2 24V heated bed upgrade kit.
  86. // https://store.bq.com/en/heated-bed-kit-hephestos2
  87. //
  88. //#define HEPHESTOS2_HEATED_BED_KIT
  89. #if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
  90. #undef TEMP_SENSOR_BED
  91. #define TEMP_SENSOR_BED 70
  92. #define HEATER_BED_INVERTING true
  93. #endif
  94. /**
  95. * Heated Chamber settings
  96. */
  97. #if TEMP_SENSOR_CHAMBER
  98. #define CHAMBER_MINTEMP 5
  99. #define CHAMBER_MAXTEMP 60
  100. #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
  101. //#define CHAMBER_LIMIT_SWITCHING
  102. //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
  103. //#define HEATER_CHAMBER_INVERTING false
  104. #endif
  105. #if DISABLED(PIDTEMPBED)
  106. #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
  107. #if ENABLED(BED_LIMIT_SWITCHING)
  108. #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
  109. #endif
  110. #endif
  111. /**
  112. * Thermal Protection provides additional protection to your printer from damage
  113. * and fire. Marlin always includes safe min and max temperature ranges which
  114. * protect against a broken or disconnected thermistor wire.
  115. *
  116. * The issue: If a thermistor falls out, it will report the much lower
  117. * temperature of the air in the room, and the the firmware will keep
  118. * the heater on.
  119. *
  120. * The solution: Once the temperature reaches the target, start observing.
  121. * If the temperature stays too far below the target (hysteresis) for too
  122. * long (period), the firmware will halt the machine as a safety precaution.
  123. *
  124. * If you get false positives for "Thermal Runaway", increase
  125. * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
  126. */
  127. #if ENABLED(THERMAL_PROTECTION_HOTENDS)
  128. #define THERMAL_PROTECTION_PERIOD 40 // Seconds
  129. #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
  130. //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
  131. #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
  132. //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
  133. #endif
  134. /**
  135. * Whenever an M104, M109, or M303 increases the target temperature, the
  136. * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
  137. * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and
  138. * requires a hard reset. This test restarts with any M104/M109/M303, but only
  139. * if the current temperature is far enough below the target for a reliable
  140. * test.
  141. *
  142. * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD
  143. * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
  144. * below 2.
  145. */
  146. #define WATCH_TEMP_PERIOD 20 // Seconds
  147. #define WATCH_TEMP_INCREASE 2 // Degrees Celsius
  148. #endif
  149. /**
  150. * Thermal Protection parameters for the bed are just as above for hotends.
  151. */
  152. #if ENABLED(THERMAL_PROTECTION_BED)
  153. #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds
  154. #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
  155. /**
  156. * As described above, except for the bed (M140/M190/M303).
  157. */
  158. #define WATCH_BED_TEMP_PERIOD 60 // Seconds
  159. #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius
  160. #endif
  161. /**
  162. * Thermal Protection parameters for the heated chamber.
  163. */
  164. #if ENABLED(THERMAL_PROTECTION_CHAMBER)
  165. #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds
  166. #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius
  167. /**
  168. * Heated chamber watch settings (M141/M191).
  169. */
  170. #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds
  171. #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
  172. #endif
  173. #if ENABLED(PIDTEMP)
  174. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
  175. // A well-chosen Kc value should add just enough power to melt the increased material volume.
  176. //#define PID_EXTRUSION_SCALING
  177. #if ENABLED(PID_EXTRUSION_SCALING)
  178. #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
  179. #define LPQ_MAX_LEN 50
  180. #endif
  181. /**
  182. * Add an experimental additional term to the heater power, proportional to the fan speed.
  183. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
  184. * You can either just add a constant compensation with the DEFAULT_Kf value
  185. * or follow the instruction below to get speed-dependent compensation.
  186. *
  187. * Constant compensation (use only with fanspeeds of 0% and 100%)
  188. * ---------------------------------------------------------------------
  189. * A good starting point for the Kf-value comes from the calculation:
  190. * kf = (power_fan * eff_fan) / power_heater * 255
  191. * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater.
  192. *
  193. * Example:
  194. * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8
  195. * Kf = (2.4W * 0.8) / 40W * 255 = 12.24
  196. *
  197. * Fan-speed dependent compensation
  198. * --------------------------------
  199. * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%).
  200. * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled.
  201. * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature
  202. * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big.
  203. * 2. Note the Kf-value for fan-speed at 100%
  204. * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving.
  205. * 4. Repeat step 1. and 2. for this fan speed.
  206. * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in
  207. * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED
  208. */
  209. //#define PID_FAN_SCALING
  210. #if ENABLED(PID_FAN_SCALING)
  211. //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION
  212. #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION)
  213. // The alternative definition is used for an easier configuration.
  214. // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED.
  215. // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly.
  216. #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf
  217. #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf
  218. #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING
  219. #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED)
  220. #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0
  221. #else
  222. #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed)
  223. #define DEFAULT_Kf 10 // A constant value added to the PID-tuner
  224. #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING
  225. #endif
  226. #endif
  227. #endif
  228. /**
  229. * Automatic Temperature:
  230. * The hotend target temperature is calculated by all the buffered lines of gcode.
  231. * The maximum buffered steps/sec of the extruder motor is called "se".
  232. * Start autotemp mode with M109 S<mintemp> B<maxtemp> F<factor>
  233. * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by
  234. * mintemp and maxtemp. Turn this off by executing M109 without F*
  235. * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp.
  236. * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode
  237. */
  238. #define AUTOTEMP
  239. #if ENABLED(AUTOTEMP)
  240. #define AUTOTEMP_OLDWEIGHT 0.98
  241. #endif
  242. // Show extra position information with 'M114 D'
  243. //#define M114_DETAIL
  244. // Show Temperature ADC value
  245. // Enable for M105 to include ADC values read from temperature sensors.
  246. //#define SHOW_TEMP_ADC_VALUES
  247. /**
  248. * High Temperature Thermistor Support
  249. *
  250. * Thermistors able to support high temperature tend to have a hard time getting
  251. * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP
  252. * will probably be caught when the heating element first turns on during the
  253. * preheating process, which will trigger a min_temp_error as a safety measure
  254. * and force stop everything.
  255. * To circumvent this limitation, we allow for a preheat time (during which,
  256. * min_temp_error won't be triggered) and add a min_temp buffer to handle
  257. * aberrant readings.
  258. *
  259. * If you want to enable this feature for your hotend thermistor(s)
  260. * uncomment and set values > 0 in the constants below
  261. */
  262. // The number of consecutive low temperature errors that can occur
  263. // before a min_temp_error is triggered. (Shouldn't be more than 10.)
  264. //#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0
  265. // The number of milliseconds a hotend will preheat before starting to check
  266. // the temperature. This value should NOT be set to the time it takes the
  267. // hot end to reach the target temperature, but the time it takes to reach
  268. // the minimum temperature your thermistor can read. The lower the better/safer.
  269. // This shouldn't need to be more than 30 seconds (30000)
  270. //#define MILLISECONDS_PREHEAT_TIME 0
  271. // @section extruder
  272. // Extruder runout prevention.
  273. // If the machine is idle and the temperature over MINTEMP
  274. // then extrude some filament every couple of SECONDS.
  275. //#define EXTRUDER_RUNOUT_PREVENT
  276. #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
  277. #define EXTRUDER_RUNOUT_MINTEMP 190
  278. #define EXTRUDER_RUNOUT_SECONDS 30
  279. #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
  280. #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
  281. #endif
  282. // @section temperature
  283. // Calibration for AD595 / AD8495 sensor to adjust temperature measurements.
  284. // The final temperature is calculated as (measuredTemp * GAIN) + OFFSET.
  285. #define TEMP_SENSOR_AD595_OFFSET 0.0
  286. #define TEMP_SENSOR_AD595_GAIN 1.0
  287. #define TEMP_SENSOR_AD8495_OFFSET 0.0
  288. #define TEMP_SENSOR_AD8495_GAIN 1.0
  289. /**
  290. * Controller Fan
  291. * To cool down the stepper drivers and MOSFETs.
  292. *
  293. * The fan will turn on automatically whenever any stepper is enabled
  294. * and turn off after a set period after all steppers are turned off.
  295. */
  296. //#define USE_CONTROLLER_FAN
  297. #if ENABLED(USE_CONTROLLER_FAN)
  298. //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
  299. #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
  300. #define CONTROLLERFAN_SPEED 255 // 255 == full speed
  301. //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled
  302. #endif
  303. // When first starting the main fan, run it at full speed for the
  304. // given number of milliseconds. This gets the fan spinning reliably
  305. // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
  306. //#define FAN_KICKSTART_TIME 100
  307. // Some coolers may require a non-zero "off" state.
  308. //#define FAN_OFF_PWM 1
  309. /**
  310. * PWM Fan Scaling
  311. *
  312. * Define the min/max speeds for PWM fans (as set with M106).
  313. *
  314. * With these options the M106 0-255 value range is scaled to a subset
  315. * to ensure that the fan has enough power to spin, or to run lower
  316. * current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
  317. * Value 0 always turns off the fan.
  318. *
  319. * Define one or both of these to override the default 0-255 range.
  320. */
  321. //#define FAN_MIN_PWM 50
  322. //#define FAN_MAX_PWM 128
  323. /**
  324. * FAST PWM FAN Settings
  325. *
  326. * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
  327. * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
  328. * frequency as close as possible to the desired frequency.
  329. *
  330. * FAST_PWM_FAN_FREQUENCY [undefined by default]
  331. * Set this to your desired frequency.
  332. * If left undefined this defaults to F = F_CPU/(2*255*1)
  333. * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
  334. * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
  335. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
  336. *
  337. * USE_OCR2A_AS_TOP [undefined by default]
  338. * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
  339. * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
  340. * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
  341. * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
  342. * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
  343. * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
  344. */
  345. #if ENABLED(FAST_PWM_FAN)
  346. //#define FAST_PWM_FAN_FREQUENCY 31400
  347. //#define USE_OCR2A_AS_TOP
  348. #endif
  349. // @section extruder
  350. /**
  351. * Extruder cooling fans
  352. *
  353. * Extruder auto fans automatically turn on when their extruders'
  354. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
  355. *
  356. * Your board's pins file specifies the recommended pins. Override those here
  357. * or set to -1 to disable completely.
  358. *
  359. * Multiple extruders can be assigned to the same pin in which case
  360. * the fan will turn on when any selected extruder is above the threshold.
  361. */
  362. #define E0_AUTO_FAN_PIN -1
  363. #define E1_AUTO_FAN_PIN -1
  364. #define E2_AUTO_FAN_PIN -1
  365. #define E3_AUTO_FAN_PIN -1
  366. #define E4_AUTO_FAN_PIN -1
  367. #define E5_AUTO_FAN_PIN -1
  368. #define CHAMBER_AUTO_FAN_PIN -1
  369. #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
  370. #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
  371. #define CHAMBER_AUTO_FAN_TEMPERATURE 30
  372. #define CHAMBER_AUTO_FAN_SPEED 255
  373. /**
  374. * Part-Cooling Fan Multiplexer
  375. *
  376. * This feature allows you to digitally multiplex the fan output.
  377. * The multiplexer is automatically switched at tool-change.
  378. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
  379. */
  380. #define FANMUX0_PIN -1
  381. #define FANMUX1_PIN -1
  382. #define FANMUX2_PIN -1
  383. /**
  384. * M355 Case Light on-off / brightness
  385. */
  386. //#define CASE_LIGHT_ENABLE
  387. #if ENABLED(CASE_LIGHT_ENABLE)
  388. //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
  389. #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
  390. #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
  391. #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
  392. //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm
  393. //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu
  394. //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting.
  395. //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED.
  396. #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
  397. #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
  398. #endif
  399. #endif
  400. // @section homing
  401. // If you want endstops to stay on (by default) even when not homing
  402. // enable this option. Override at any time with M120, M121.
  403. //#define ENDSTOPS_ALWAYS_ON_DEFAULT
  404. // @section extras
  405. //#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats.
  406. // Employ an external closed loop controller. Override pins here if needed.
  407. //#define EXTERNAL_CLOSED_LOOP_CONTROLLER
  408. #if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER)
  409. //#define CLOSED_LOOP_ENABLE_PIN -1
  410. //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1
  411. #endif
  412. /**
  413. * Dual Steppers / Dual Endstops
  414. *
  415. * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes.
  416. *
  417. * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to
  418. * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop
  419. * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug
  420. * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'.
  421. *
  422. * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors
  423. * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error
  424. * in X2. Dual endstop offsets can be set at runtime with 'M666 X<offset> Y<offset> Z<offset>'.
  425. */
  426. //#define X_DUAL_STEPPER_DRIVERS
  427. #if ENABLED(X_DUAL_STEPPER_DRIVERS)
  428. #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions
  429. //#define X_DUAL_ENDSTOPS
  430. #if ENABLED(X_DUAL_ENDSTOPS)
  431. #define X2_USE_ENDSTOP _XMAX_
  432. #define X_DUAL_ENDSTOPS_ADJUSTMENT 0
  433. #endif
  434. #endif
  435. //#define Y_DUAL_STEPPER_DRIVERS
  436. #if ENABLED(Y_DUAL_STEPPER_DRIVERS)
  437. #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions
  438. //#define Y_DUAL_ENDSTOPS
  439. #if ENABLED(Y_DUAL_ENDSTOPS)
  440. #define Y2_USE_ENDSTOP _YMAX_
  441. #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0
  442. #endif
  443. #endif
  444. //#define Z_DUAL_STEPPER_DRIVERS
  445. #if ENABLED(Z_DUAL_STEPPER_DRIVERS)
  446. //#define Z_DUAL_ENDSTOPS
  447. #if ENABLED(Z_DUAL_ENDSTOPS)
  448. #define Z2_USE_ENDSTOP _XMAX_
  449. #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0
  450. #endif
  451. #endif
  452. //#define Z_TRIPLE_STEPPER_DRIVERS
  453. #if ENABLED(Z_TRIPLE_STEPPER_DRIVERS)
  454. //#define Z_TRIPLE_ENDSTOPS
  455. #if ENABLED(Z_TRIPLE_ENDSTOPS)
  456. #define Z2_USE_ENDSTOP _XMAX_
  457. #define Z3_USE_ENDSTOP _YMAX_
  458. #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0
  459. #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0
  460. #endif
  461. #endif
  462. /**
  463. * Dual X Carriage
  464. *
  465. * This setup has two X carriages that can move independently, each with its own hotend.
  466. * The carriages can be used to print an object with two colors or materials, or in
  467. * "duplication mode" it can print two identical or X-mirrored objects simultaneously.
  468. * The inactive carriage is parked automatically to prevent oozing.
  469. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
  470. * By default the X2 stepper is assigned to the first unused E plug on the board.
  471. *
  472. * The following Dual X Carriage modes can be selected with M605 S<mode>:
  473. *
  474. * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
  475. * results as long as it supports dual X-carriages. (M605 S0)
  476. *
  477. * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
  478. * that additional slicer support is not required. (M605 S1)
  479. *
  480. * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
  481. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
  482. * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
  483. * follow with M605 S2 to initiate duplicated movement.
  484. *
  485. * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
  486. * the movement of the first except the second extruder is reversed in the X axis.
  487. * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
  488. * follow with M605 S3 to initiate mirrored movement.
  489. */
  490. //#define DUAL_X_CARRIAGE
  491. #if ENABLED(DUAL_X_CARRIAGE)
  492. #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS
  493. #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage
  494. #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage
  495. #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed
  496. #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position
  497. #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS.
  498. // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software
  499. // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
  500. // without modifying the firmware (through the "M218 T1 X???" command).
  501. // Remember: you should set the second extruder x-offset to 0 in your slicer.
  502. // This is the default power-up mode which can be later using M605.
  503. #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE
  504. // Default x offset in duplication mode (typically set to half print bed width)
  505. #define DEFAULT_DUPLICATION_X_OFFSET 100
  506. #endif // DUAL_X_CARRIAGE
  507. // Activate a solenoid on the active extruder with M380. Disable all with M381.
  508. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
  509. //#define EXT_SOLENOID
  510. // @section homing
  511. // Homing hits each endstop, retracts by these distances, then does a slower bump.
  512. #define X_HOME_BUMP_MM 5
  513. #define Y_HOME_BUMP_MM 5
  514. #define Z_HOME_BUMP_MM 2
  515. #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
  516. //#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially
  517. //#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing
  518. // When G28 is called, this option will make Y home before X
  519. //#define HOME_Y_BEFORE_X
  520. // Enable this if X or Y can't home without homing the other axis first.
  521. //#define CODEPENDENT_XY_HOMING
  522. #if ENABLED(BLTOUCH)
  523. /**
  524. * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
  525. * Do not activate settings that the probe might not understand. Clones might misunderstand
  526. * advanced commands.
  527. *
  528. * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
  529. * check the wiring of the BROWN, RED and ORANGE wires.
  530. *
  531. * Note: If the trigger signal of your probe is not being recognized, it has been very often
  532. * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
  533. * like they would be with a real switch. So please check the wiring first.
  534. *
  535. * Settings for all BLTouch and clone probes:
  536. */
  537. // Safety: The probe needs time to recognize the command.
  538. // Minimum command delay (ms). Enable and increase if needed.
  539. //#define BLTOUCH_DELAY 500
  540. /**
  541. * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
  542. */
  543. // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
  544. // in special cases, like noisy or filtered input configurations.
  545. //#define BLTOUCH_FORCE_SW_MODE
  546. /**
  547. * Settings for BLTouch Smart 3.0 and 3.1
  548. * Summary:
  549. * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
  550. * - High-Speed mode
  551. * - Disable LCD voltage options
  552. */
  553. /**
  554. * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
  555. * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
  556. * If disabled, OD mode is the hard-coded default on 3.0
  557. * On startup, Marlin will compare its eeprom to this vale. If the selected mode
  558. * differs, a mode set eeprom write will be completed at initialization.
  559. * Use the option below to force an eeprom write to a V3.1 probe regardless.
  560. */
  561. //#define BLTOUCH_SET_5V_MODE
  562. /**
  563. * Safety: Activate if connecting a probe with an unknown voltage mode.
  564. * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
  565. * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
  566. * To preserve the life of the probe, use this once then turn it off and re-flash.
  567. */
  568. //#define BLTOUCH_FORCE_MODE_SET
  569. /**
  570. * Use "HIGH SPEED" mode for probing.
  571. * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
  572. * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
  573. * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
  574. */
  575. //#define BLTOUCH_HS_MODE
  576. // Safety: Enable voltage mode settings in the LCD menu.
  577. //#define BLTOUCH_LCD_VOLTAGE_MENU
  578. #endif // BLTOUCH
  579. /**
  580. * Z Steppers Auto-Alignment
  581. * Add the G34 command to align multiple Z steppers using a bed probe.
  582. */
  583. //#define Z_STEPPER_AUTO_ALIGN
  584. #if ENABLED(Z_STEPPER_AUTO_ALIGN)
  585. // Define probe X and Y positions for Z1, Z2 [, Z3]
  586. #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } }
  587. // Provide Z stepper positions for more rapid convergence in bed alignment.
  588. // Currently requires triple stepper drivers.
  589. //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS
  590. #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
  591. // Define Stepper XY positions for Z1, Z2, Z3 corresponding to
  592. // the Z screw positions in the bed carriage.
  593. // Define one position per Z stepper in stepper driver order.
  594. #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } }
  595. #else
  596. // Amplification factor. Used to scale the correction step up or down.
  597. // In case the stepper (spindle) position is further out than the test point.
  598. // Use a value > 1. NOTE: This may cause instability
  599. #define Z_STEPPER_ALIGN_AMP 1.0
  600. #endif
  601. // Set number of iterations to align
  602. #define Z_STEPPER_ALIGN_ITERATIONS 3
  603. // Enable to restore leveling setup after operation
  604. #define RESTORE_LEVELING_AFTER_G34
  605. // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm
  606. #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle
  607. // Stop criterion. If the accuracy is better than this stop iterating early
  608. #define Z_STEPPER_ALIGN_ACC 0.02
  609. #endif
  610. // @section motion
  611. #define AXIS_RELATIVE_MODES { false, false, false, false }
  612. // Add a Duplicate option for well-separated conjoined nozzles
  613. //#define MULTI_NOZZLE_DUPLICATION
  614. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
  615. #define INVERT_X_STEP_PIN false
  616. #define INVERT_Y_STEP_PIN false
  617. #define INVERT_Z_STEP_PIN false
  618. #define INVERT_E_STEP_PIN false
  619. // Default stepper release if idle. Set to 0 to deactivate.
  620. // Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true.
  621. // Time can be set by M18 and M84.
  622. #define DEFAULT_STEPPER_DEACTIVE_TIME 120
  623. #define DISABLE_INACTIVE_X true
  624. #define DISABLE_INACTIVE_Y true
  625. #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished.
  626. #define DISABLE_INACTIVE_E true
  627. #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate
  628. #define DEFAULT_MINTRAVELFEEDRATE 0.0
  629. //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated
  630. // Minimum time that a segment needs to take if the buffer is emptied
  631. #define DEFAULT_MINSEGMENTTIME 20000 // (ms)
  632. // If defined the movements slow down when the look ahead buffer is only half full
  633. #define SLOWDOWN
  634. // Frequency limit
  635. // See nophead's blog for more info
  636. // Not working O
  637. //#define XY_FREQUENCY_LIMIT 15
  638. // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
  639. // of the buffer and all stops. This should not be much greater than zero and should only be changed
  640. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
  641. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
  642. //
  643. // Backlash Compensation
  644. // Adds extra movement to axes on direction-changes to account for backlash.
  645. //
  646. //#define BACKLASH_COMPENSATION
  647. #if ENABLED(BACKLASH_COMPENSATION)
  648. // Define values for backlash distance and correction.
  649. // If BACKLASH_GCODE is enabled these values are the defaults.
  650. #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm)
  651. #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction
  652. // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments
  653. // to reduce print artifacts. (Enabling this is costly in memory and computation!)
  654. //#define BACKLASH_SMOOTHING_MM 3 // (mm)
  655. // Add runtime configuration and tuning of backlash values (M425)
  656. //#define BACKLASH_GCODE
  657. #if ENABLED(BACKLASH_GCODE)
  658. // Measure the Z backlash when probing (G29) and set with "M425 Z"
  659. #define MEASURE_BACKLASH_WHEN_PROBING
  660. #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING)
  661. // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT
  662. // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION
  663. // increments while checking for the contact to be broken.
  664. #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm)
  665. #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm)
  666. #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m)
  667. #endif
  668. #endif
  669. #endif
  670. /**
  671. * Automatic backlash, position and hotend offset calibration
  672. *
  673. * Enable G425 to run automatic calibration using an electrically-
  674. * conductive cube, bolt, or washer mounted on the bed.
  675. *
  676. * G425 uses the probe to touch the top and sides of the calibration object
  677. * on the bed and measures and/or correct positional offsets, axis backlash
  678. * and hotend offsets.
  679. *
  680. * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within
  681. * ±5mm of true values for G425 to succeed.
  682. */
  683. //#define CALIBRATION_GCODE
  684. #if ENABLED(CALIBRATION_GCODE)
  685. #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm
  686. #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m
  687. #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m
  688. #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m
  689. // The following parameters refer to the conical section of the nozzle tip.
  690. #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
  691. #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
  692. // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM).
  693. //#define CALIBRATION_REPORTING
  694. // The true location and dimension the cube/bolt/washer on the bed.
  695. #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
  696. #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
  697. // Comment out any sides which are unreachable by the probe. For best
  698. // auto-calibration results, all sides must be reachable.
  699. #define CALIBRATION_MEASURE_RIGHT
  700. #define CALIBRATION_MEASURE_FRONT
  701. #define CALIBRATION_MEASURE_LEFT
  702. #define CALIBRATION_MEASURE_BACK
  703. // Probing at the exact top center only works if the center is flat. If
  704. // probing on a screwhead or hollow washer, probe near the edges.
  705. //#define CALIBRATION_MEASURE_AT_TOP_EDGES
  706. // Define pin which is read during calibration
  707. #ifndef CALIBRATION_PIN
  708. #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
  709. #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
  710. //#define CALIBRATION_PIN_PULLDOWN
  711. #define CALIBRATION_PIN_PULLUP
  712. #endif
  713. #endif
  714. /**
  715. * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies
  716. * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible
  717. * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
  718. * lowest stepping frequencies.
  719. */
  720. //#define ADAPTIVE_STEP_SMOOTHING
  721. /**
  722. * Custom Microstepping
  723. * Override as-needed for your setup. Up to 3 MS pins are supported.
  724. */
  725. //#define MICROSTEP1 LOW,LOW,LOW
  726. //#define MICROSTEP2 HIGH,LOW,LOW
  727. //#define MICROSTEP4 LOW,HIGH,LOW
  728. //#define MICROSTEP8 HIGH,HIGH,LOW
  729. //#define MICROSTEP16 LOW,LOW,HIGH
  730. //#define MICROSTEP32 HIGH,LOW,HIGH
  731. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
  732. #define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16]
  733. /**
  734. * @section stepper motor current
  735. *
  736. * Some boards have a means of setting the stepper motor current via firmware.
  737. *
  738. * The power on motor currents are set by:
  739. * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2
  740. * known compatible chips: A4982
  741. * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H
  742. * known compatible chips: AD5206
  743. * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
  744. * known compatible chips: MCP4728
  745. * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE
  746. * known compatible chips: MCP4451, MCP4018
  747. *
  748. * Motor currents can also be set by M907 - M910 and by the LCD.
  749. * M907 - applies to all.
  750. * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H
  751. * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2
  752. */
  753. //#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps
  754. //#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
  755. //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
  756. // Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro)
  757. //#define DIGIPOT_I2C
  758. #if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A)
  759. /**
  760. * Common slave addresses:
  761. *
  762. * A (A shifted) B (B shifted) IC
  763. * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451
  764. * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451
  765. * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451
  766. * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451
  767. * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018
  768. */
  769. #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT
  770. #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT
  771. #endif
  772. //#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
  773. #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5
  774. // Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
  775. // These correspond to the physical drivers, so be mindful if the order is changed.
  776. #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
  777. //===========================================================================
  778. //=============================Additional Features===========================
  779. //===========================================================================
  780. // @section lcd
  781. #if EITHER(ULTIPANEL, EXTENSIBLE_UI)
  782. #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
  783. #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
  784. #if ENABLED(ULTIPANEL)
  785. #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
  786. #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
  787. #endif
  788. #endif
  789. // Change values more rapidly when the encoder is rotated faster
  790. #define ENCODER_RATE_MULTIPLIER
  791. #if ENABLED(ENCODER_RATE_MULTIPLIER)
  792. #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed
  793. #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
  794. #endif
  795. // Play a beep when the feedrate is changed from the Status Screen
  796. //#define BEEP_ON_FEEDRATE_CHANGE
  797. #if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
  798. #define FEEDRATE_CHANGE_BEEP_DURATION 10
  799. #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
  800. #endif
  801. #if HAS_LCD_MENU
  802. // Include a page of printer information in the LCD Main Menu
  803. //#define LCD_INFO_MENU
  804. #if ENABLED(LCD_INFO_MENU)
  805. //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
  806. #endif
  807. // BACK menu items keep the highlight at the top
  808. //#define TURBO_BACK_MENU_ITEM
  809. /**
  810. * LED Control Menu
  811. * Add LED Control to the LCD menu
  812. */
  813. //#define LED_CONTROL_MENU
  814. #if ENABLED(LED_CONTROL_MENU)
  815. #define LED_COLOR_PRESETS // Enable the Preset Color menu option
  816. #if ENABLED(LED_COLOR_PRESETS)
  817. #define LED_USER_PRESET_RED 255 // User defined RED value
  818. #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
  819. #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
  820. #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
  821. #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
  822. //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
  823. #endif
  824. #endif
  825. #endif // HAS_LCD_MENU
  826. // Scroll a longer status message into view
  827. //#define STATUS_MESSAGE_SCROLLING
  828. // On the Info Screen, display XY with one decimal place when possible
  829. //#define LCD_DECIMAL_SMALL_XY
  830. // The timeout (in ms) to return to the status screen from sub-menus
  831. //#define LCD_TIMEOUT_TO_STATUS 15000
  832. // Add an 'M73' G-code to set the current percentage
  833. //#define LCD_SET_PROGRESS_MANUALLY
  834. // Show the E position (filament used) during printing
  835. //#define LCD_SHOW_E_TOTAL
  836. #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
  837. //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
  838. //#define SHOW_REMAINING_TIME // Display estimated time to completion
  839. #if ENABLED(SHOW_REMAINING_TIME)
  840. //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation
  841. //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time
  842. #endif
  843. #endif
  844. #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
  845. //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
  846. #if ENABLED(LCD_PROGRESS_BAR)
  847. #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
  848. #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message
  849. #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever)
  850. //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it
  851. //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar
  852. #endif
  853. #endif
  854. #if ENABLED(SDSUPPORT)
  855. // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
  856. // around this by connecting a push button or single throw switch to the pin defined
  857. // as SD_DETECT_PIN in your board's pins definitions.
  858. // This setting should be disabled unless you are using a push button, pulling the pin to ground.
  859. // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
  860. #define SD_DETECT_INVERTED
  861. #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
  862. #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place.
  863. // Reverse SD sort to show "more recent" files first, according to the card's FAT.
  864. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  865. #define SDCARD_RATHERRECENTFIRST
  866. #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing
  867. //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files
  868. #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27")
  869. /**
  870. * Continue after Power-Loss (Creality3D)
  871. *
  872. * Store the current state to the SD Card at the start of each layer
  873. * during SD printing. If the recovery file is found at boot time, present
  874. * an option on the LCD screen to continue the print from the last-known
  875. * point in the file.
  876. */
  877. //#define POWER_LOSS_RECOVERY
  878. #if ENABLED(POWER_LOSS_RECOVERY)
  879. //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
  880. //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
  881. //#define POWER_LOSS_PIN 44 // Pin to detect power loss
  882. //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
  883. //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate
  884. //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume
  885. //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
  886. // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
  887. // especially with "vase mode" printing. Set too high and vases cannot be continued.
  888. #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
  889. #endif
  890. /**
  891. * Sort SD file listings in alphabetical order.
  892. *
  893. * With this option enabled, items on SD cards will be sorted
  894. * by name for easier navigation.
  895. *
  896. * By default...
  897. *
  898. * - Use the slowest -but safest- method for sorting.
  899. * - Folders are sorted to the top.
  900. * - The sort key is statically allocated.
  901. * - No added G-code (M34) support.
  902. * - 40 item sorting limit. (Items after the first 40 are unsorted.)
  903. *
  904. * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the
  905. * compiler to calculate the worst-case usage and throw an error if the SRAM
  906. * limit is exceeded.
  907. *
  908. * - SDSORT_USES_RAM provides faster sorting via a static directory buffer.
  909. * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer.
  910. * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!)
  911. * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!)
  912. */
  913. //#define SDCARD_SORT_ALPHA
  914. // SD Card Sorting options
  915. #if ENABLED(SDCARD_SORT_ALPHA)
  916. #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each.
  917. #define FOLDER_SORTING -1 // -1=above 0=none 1=below
  918. #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code.
  919. #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting.
  920. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
  921. #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option.
  922. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
  923. #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting.
  924. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
  925. #endif
  926. // This allows hosts to request long names for files and folders with M33
  927. //#define LONG_FILENAME_HOST_SUPPORT
  928. // Enable this option to scroll long filenames in the SD card menu
  929. //#define SCROLL_LONG_FILENAMES
  930. // Leave the heaters on after Stop Print (not recommended!)
  931. //#define SD_ABORT_NO_COOLDOWN
  932. /**
  933. * This option allows you to abort SD printing when any endstop is triggered.
  934. * This feature must be enabled with "M540 S1" or from the LCD menu.
  935. * To have any effect, endstops must be enabled during SD printing.
  936. */
  937. //#define SD_ABORT_ON_ENDSTOP_HIT
  938. /**
  939. * This option makes it easier to print the same SD Card file again.
  940. * On print completion the LCD Menu will open with the file selected.
  941. * You can just click to start the print, or navigate elsewhere.
  942. */
  943. //#define SD_REPRINT_LAST_SELECTED_FILE
  944. /**
  945. * Auto-report SdCard status with M27 S<seconds>
  946. */
  947. //#define AUTO_REPORT_SD_STATUS
  948. /**
  949. * Support for USB thumb drives using an Arduino USB Host Shield or
  950. * equivalent MAX3421E breakout board. The USB thumb drive will appear
  951. * to Marlin as an SD card.
  952. *
  953. * The MAX3421E can be assigned the same pins as the SD card reader, with
  954. * the following pin mapping:
  955. *
  956. * SCLK, MOSI, MISO --> SCLK, MOSI, MISO
  957. * INT --> SD_DETECT_PIN [1]
  958. * SS --> SDSS
  959. *
  960. * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility.
  961. */
  962. //#define USB_FLASH_DRIVE_SUPPORT
  963. #if ENABLED(USB_FLASH_DRIVE_SUPPORT)
  964. #define USB_CS_PIN SDSS
  965. #define USB_INTR_PIN SD_DETECT_PIN
  966. /**
  967. * USB Host Shield Library
  968. *
  969. * - UHS2 uses no interrupts and has been production-tested
  970. * on a LulzBot TAZ Pro with a 32-bit Archim board.
  971. *
  972. * - UHS3 is newer code with better USB compatibility. But it
  973. * is less tested and is known to interfere with Servos.
  974. * [1] This requires USB_INTR_PIN to be interrupt-capable.
  975. */
  976. //#define USE_UHS3_USB
  977. #endif
  978. /**
  979. * When using a bootloader that supports SD-Firmware-Flashing,
  980. * add a menu item to activate SD-FW-Update on the next reboot.
  981. *
  982. * Requires ATMEGA2560 (Arduino Mega)
  983. *
  984. * Tested with this bootloader:
  985. * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560
  986. */
  987. //#define SD_FIRMWARE_UPDATE
  988. #if ENABLED(SD_FIRMWARE_UPDATE)
  989. #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF
  990. #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0
  991. #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF
  992. #endif
  993. // Add an optimized binary file transfer mode, initiated with 'M28 B1'
  994. //#define BINARY_FILE_TRANSFER
  995. #if HAS_SDCARD_CONNECTION
  996. /**
  997. * Set this option to one of the following (or the board's defaults apply):
  998. *
  999. * LCD - Use the SD drive in the external LCD controller.
  1000. * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
  1001. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
  1002. *
  1003. * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
  1004. */
  1005. //#define SDCARD_CONNECTION LCD
  1006. #endif
  1007. #endif // SDSUPPORT
  1008. /**
  1009. * By default an onboard SD card reader may be shared as a USB mass-
  1010. * storage device. This option hides the SD card from the host PC.
  1011. */
  1012. //#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
  1013. /**
  1014. * Additional options for Graphical Displays
  1015. *
  1016. * Use the optimizations here to improve printing performance,
  1017. * which can be adversely affected by graphical display drawing,
  1018. * especially when doing several short moves, and when printing
  1019. * on DELTA and SCARA machines.
  1020. *
  1021. * Some of these options may result in the display lagging behind
  1022. * controller events, as there is a trade-off between reliable
  1023. * printing performance versus fast display updates.
  1024. */
  1025. #if HAS_GRAPHICAL_LCD
  1026. // Show SD percentage next to the progress bar
  1027. //#define DOGM_SD_PERCENT
  1028. // Enable to save many cycles by drawing a hollow frame on the Info Screen
  1029. #define XYZ_HOLLOW_FRAME
  1030. // Enable to save many cycles by drawing a hollow frame on Menu Screens
  1031. #define MENU_HOLLOW_FRAME
  1032. // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM.
  1033. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
  1034. //#define USE_BIG_EDIT_FONT
  1035. // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM.
  1036. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
  1037. //#define USE_SMALL_INFOFONT
  1038. // Enable this option and reduce the value to optimize screen updates.
  1039. // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
  1040. //#define DOGM_SPI_DELAY_US 5
  1041. // Swap the CW/CCW indicators in the graphics overlay
  1042. //#define OVERLAY_GFX_REVERSE
  1043. /**
  1044. * ST7920-based LCDs can emulate a 16 x 4 character display using
  1045. * the ST7920 character-generator for very fast screen updates.
  1046. * Enable LIGHTWEIGHT_UI to use this special display mode.
  1047. *
  1048. * Since LIGHTWEIGHT_UI has limited space, the position and status
  1049. * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
  1050. * length of time to display the status message before clearing.
  1051. *
  1052. * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
  1053. * This will prevent position updates from being displayed.
  1054. */
  1055. #if ENABLED(U8GLIB_ST7920)
  1056. //#define LIGHTWEIGHT_UI
  1057. #if ENABLED(LIGHTWEIGHT_UI)
  1058. #define STATUS_EXPIRE_SECONDS 20
  1059. #endif
  1060. #endif
  1061. /**
  1062. * Status (Info) Screen customizations
  1063. * These options may affect code size and screen render time.
  1064. * Custom status screens can forcibly override these settings.
  1065. */
  1066. //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
  1067. //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
  1068. #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
  1069. #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
  1070. #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
  1071. #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
  1072. //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
  1073. //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
  1074. //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
  1075. //#define STATUS_HEAT_PERCENT // Show heating in a progress bar
  1076. //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
  1077. //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM.
  1078. // Frivolous Game Options
  1079. //#define MARLIN_BRICKOUT
  1080. //#define MARLIN_INVADERS
  1081. //#define MARLIN_SNAKE
  1082. //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu
  1083. #endif // HAS_GRAPHICAL_LCD
  1084. //
  1085. // Additional options for DGUS / DWIN displays
  1086. //
  1087. #if HAS_DGUS_LCD
  1088. #define DGUS_SERIAL_PORT 2
  1089. #define DGUS_BAUDRATE 115200
  1090. #define DGUS_RX_BUFFER_SIZE 128
  1091. #define DGUS_TX_BUFFER_SIZE 48
  1092. //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
  1093. #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
  1094. #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
  1095. #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
  1096. #define DGUS_PRINT_FILENAME // Display the filename during printing
  1097. #define DGUS_PREHEAT_UI // Display a preheat screen during heatup
  1098. #if ENABLED(DGUS_LCD_UI_FYSETC)
  1099. //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
  1100. #else
  1101. #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
  1102. #endif
  1103. #define DGUS_FILAMENT_LOADUNLOAD
  1104. #if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
  1105. #define DGUS_FILAMENT_PURGE_LENGTH 10
  1106. #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
  1107. #endif
  1108. #define DGUS_UI_WAITING // Show a "waiting" screen between some screens
  1109. #if ENABLED(DGUS_UI_WAITING)
  1110. #define DGUS_UI_WAITING_STATUS 10
  1111. #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
  1112. #endif
  1113. #endif
  1114. #endif // HAS_DGUS_LCD
  1115. //
  1116. // Touch UI for the FTDI Embedded Video Engine (EVE)
  1117. //
  1118. #if ENABLED(TOUCH_UI_FTDI_EVE)
  1119. // Display board used
  1120. //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
  1121. //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
  1122. //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
  1123. //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
  1124. //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
  1125. // Correct the resolution if not using the stock TFT panel.
  1126. //#define TOUCH_UI_320x240
  1127. //#define TOUCH_UI_480x272
  1128. //#define TOUCH_UI_800x480
  1129. // Mappings for boards with a standard RepRapDiscount Display connector
  1130. //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
  1131. //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
  1132. //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
  1133. //#define OTHER_PIN_LAYOUT // Define pins manually below
  1134. #if ENABLED(OTHER_PIN_LAYOUT)
  1135. // The pins for CS and MOD_RESET (PD) must be chosen.
  1136. #define CLCD_MOD_RESET 9
  1137. #define CLCD_SPI_CS 10
  1138. // If using software SPI, specify pins for SCLK, MOSI, MISO
  1139. //#define CLCD_USE_SOFT_SPI
  1140. #if ENABLED(CLCD_USE_SOFT_SPI)
  1141. #define CLCD_SOFT_SPI_MOSI 11
  1142. #define CLCD_SOFT_SPI_MISO 12
  1143. #define CLCD_SOFT_SPI_SCLK 13
  1144. #endif
  1145. #endif
  1146. // Display Orientation. An inverted (i.e. upside-down) display
  1147. // is supported on the FT800. The FT810 and beyond also support
  1148. // portrait and mirrored orientations.
  1149. //#define TOUCH_UI_INVERTED
  1150. //#define TOUCH_UI_PORTRAIT
  1151. //#define TOUCH_UI_MIRRORED
  1152. // UTF8 processing and rendering.
  1153. // Unsupported characters are shown as '?'.
  1154. //#define TOUCH_UI_USE_UTF8
  1155. #if ENABLED(TOUCH_UI_USE_UTF8)
  1156. // Western accents support. These accented characters use
  1157. // combined bitmaps and require relatively little storage.
  1158. #define TOUCH_UI_UTF8_WESTERN_CHARSET
  1159. #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET)
  1160. // Additional character groups. These characters require
  1161. // full bitmaps and take up considerable storage:
  1162. //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³
  1163. //#define TOUCH_UI_UTF8_COPYRIGHT // © ®
  1164. //#define TOUCH_UI_UTF8_GERMANIC // ß
  1165. //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ
  1166. //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡
  1167. //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥
  1168. //#define TOUCH_UI_UTF8_ORDINALS // º ª
  1169. //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷
  1170. //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾
  1171. //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬
  1172. #endif
  1173. #endif
  1174. // Use a smaller font when labels don't fit buttons
  1175. #define TOUCH_UI_FIT_TEXT
  1176. // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE)
  1177. //#define LCD_LANGUAGE_1 en
  1178. //#define LCD_LANGUAGE_2 fr
  1179. //#define LCD_LANGUAGE_3 de
  1180. //#define LCD_LANGUAGE_4 es
  1181. //#define LCD_LANGUAGE_5 it
  1182. // Use a numeric passcode for "Screen lock" keypad.
  1183. // (recommended for smaller displays)
  1184. //#define TOUCH_UI_PASSCODE
  1185. // Output extra debug info for Touch UI events
  1186. //#define TOUCH_UI_DEBUG
  1187. // Developer menu (accessed by touching "About Printer" copyright text)
  1188. //#define TOUCH_UI_DEVELOPER_MENU
  1189. #endif
  1190. //
  1191. // FSMC Graphical TFT
  1192. //
  1193. #if ENABLED(FSMC_GRAPHICAL_TFT)
  1194. //#define TFT_MARLINUI_COLOR 0xFFFF // White
  1195. //#define TFT_MARLINBG_COLOR 0x0000 // Black
  1196. //#define TFT_DISABLED_COLOR 0x0003 // Almost black
  1197. //#define TFT_BTCANCEL_COLOR 0xF800 // Red
  1198. //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow
  1199. //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan
  1200. #endif
  1201. // @section safety
  1202. /**
  1203. * The watchdog hardware timer will do a reset and disable all outputs
  1204. * if the firmware gets too overloaded to read the temperature sensors.
  1205. *
  1206. * If you find that watchdog reboot causes your AVR board to hang forever,
  1207. * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO.
  1208. * NOTE: This method is less reliable as it can only catch hangups while
  1209. * interrupts are enabled.
  1210. */
  1211. #define USE_WATCHDOG
  1212. #if ENABLED(USE_WATCHDOG)
  1213. //#define WATCHDOG_RESET_MANUAL
  1214. #endif
  1215. // @section lcd
  1216. /**
  1217. * Babystepping enables movement of the axes by tiny increments without changing
  1218. * the current position values. This feature is used primarily to adjust the Z
  1219. * axis in the first layer of a print in real-time.
  1220. *
  1221. * Warning: Does not respect endstops!
  1222. */
  1223. //#define BABYSTEPPING
  1224. #if ENABLED(BABYSTEPPING)
  1225. //#define BABYSTEP_WITHOUT_HOMING
  1226. //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
  1227. #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
  1228. #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion.
  1229. #define BABYSTEP_MULTIPLICATOR_XY 1
  1230. //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
  1231. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
  1232. #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
  1233. // Note: Extra time may be added to mitigate controller latency.
  1234. //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement).
  1235. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle.
  1236. #if ENABLED(MOVE_Z_WHEN_IDLE)
  1237. #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size.
  1238. #endif
  1239. #endif
  1240. //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
  1241. //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
  1242. #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
  1243. //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
  1244. //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
  1245. #endif
  1246. #endif
  1247. // @section extruder
  1248. /**
  1249. * Linear Pressure Control v1.5
  1250. *
  1251. * Assumption: advance [steps] = k * (delta velocity [steps/s])
  1252. * K=0 means advance disabled.
  1253. *
  1254. * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions!
  1255. *
  1256. * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak.
  1257. * Larger K values will be needed for flexible filament and greater distances.
  1258. * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk)
  1259. * print acceleration will be reduced during the affected moves to keep within the limit.
  1260. *
  1261. * See http://marlinfw.org/docs/features/lin_advance.html for full instructions.
  1262. * Mention @Sebastianv650 on GitHub to alert the author of any issues.
  1263. */
  1264. //#define LIN_ADVANCE
  1265. #if ENABLED(LIN_ADVANCE)
  1266. //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants
  1267. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
  1268. //#define LA_DEBUG // If enabled, this will generate debug information output over USB.
  1269. #endif
  1270. // @section leveling
  1271. /**
  1272. * Points to probe for all 3-point Leveling procedures.
  1273. * Override if the automatically selected points are inadequate.
  1274. */
  1275. #if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
  1276. //#define PROBE_PT_1_X 15
  1277. //#define PROBE_PT_1_Y 180
  1278. //#define PROBE_PT_2_X 15
  1279. //#define PROBE_PT_2_Y 20
  1280. //#define PROBE_PT_3_X 170
  1281. //#define PROBE_PT_3_Y 20
  1282. #endif
  1283. /**
  1284. * Override MIN_PROBE_EDGE for each side of the build plate
  1285. * Useful to get probe points to exact positions on targets or
  1286. * to allow leveling to avoid plate clamps on only specific
  1287. * sides of the bed. With NOZZLE_AS_PROBE negative values are
  1288. * allowed, to permit probing outside the bed.
  1289. *
  1290. * If you are replacing the prior *_PROBE_BED_POSITION options,
  1291. * LEFT and FRONT values in most cases will map directly over
  1292. * RIGHT and REAR would be the inverse such as
  1293. * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION)
  1294. *
  1295. * This will allow all positions to match at compilation, however
  1296. * should the probe position be modified with M851XY then the
  1297. * probe points will follow. This prevents any change from causing
  1298. * the probe to be unable to reach any points.
  1299. */
  1300. #if PROBE_SELECTED && !IS_KINEMATIC
  1301. //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE
  1302. //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE
  1303. //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE
  1304. //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE
  1305. #endif
  1306. #if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
  1307. // Override the mesh area if the automatic (max) area is too large
  1308. //#define MESH_MIN_X MESH_INSET
  1309. //#define MESH_MIN_Y MESH_INSET
  1310. //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
  1311. //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
  1312. #endif
  1313. /**
  1314. * Repeatedly attempt G29 leveling until it succeeds.
  1315. * Stop after G29_MAX_RETRIES attempts.
  1316. */
  1317. //#define G29_RETRY_AND_RECOVER
  1318. #if ENABLED(G29_RETRY_AND_RECOVER)
  1319. #define G29_MAX_RETRIES 3
  1320. #define G29_HALT_ON_FAILURE
  1321. /**
  1322. * Specify the GCODE commands that will be executed when leveling succeeds,
  1323. * between attempts, and after the maximum number of retries have been tried.
  1324. */
  1325. #define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
  1326. #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
  1327. #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
  1328. #endif
  1329. // @section extras
  1330. //
  1331. // G2/G3 Arc Support
  1332. //
  1333. #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
  1334. #if ENABLED(ARC_SUPPORT)
  1335. #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
  1336. #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
  1337. //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
  1338. #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
  1339. //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
  1340. //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
  1341. #endif
  1342. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
  1343. //#define BEZIER_CURVE_SUPPORT
  1344. /**
  1345. * G38 Probe Target
  1346. *
  1347. * This option adds G38.2 and G38.3 (probe towards target)
  1348. * and optionally G38.4 and G38.5 (probe away from target).
  1349. * Set MULTIPLE_PROBING for G38 to probe more than once.
  1350. */
  1351. //#define G38_PROBE_TARGET
  1352. #if ENABLED(G38_PROBE_TARGET)
  1353. //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
  1354. #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
  1355. #endif
  1356. // Moves (or segments) with fewer steps than this will be joined with the next move
  1357. #define MIN_STEPS_PER_SEGMENT 6
  1358. /**
  1359. * Minimum delay before and after setting the stepper DIR (in ns)
  1360. * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  1361. * 20 : Minimum for TMC2xxx drivers
  1362. * 200 : Minimum for A4988 drivers
  1363. * 400 : Minimum for A5984 drivers
  1364. * 500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  1365. * 650 : Minimum for DRV8825 drivers
  1366. * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
  1367. * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
  1368. *
  1369. * Override the default value based on the driver type set in Configuration.h.
  1370. */
  1371. //#define MINIMUM_STEPPER_POST_DIR_DELAY 650
  1372. //#define MINIMUM_STEPPER_PRE_DIR_DELAY 650
  1373. /**
  1374. * Minimum stepper driver pulse width (in µs)
  1375. * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
  1376. * 0 : Minimum 500ns for LV8729, adjusted in stepper.h
  1377. * 1 : Minimum for A4988 and A5984 stepper drivers
  1378. * 2 : Minimum for DRV8825 stepper drivers
  1379. * 3 : Minimum for TB6600 stepper drivers
  1380. * 30 : Minimum for TB6560 stepper drivers
  1381. *
  1382. * Override the default value based on the driver type set in Configuration.h.
  1383. */
  1384. //#define MINIMUM_STEPPER_PULSE 2
  1385. /**
  1386. * Maximum stepping rate (in Hz) the stepper driver allows
  1387. * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
  1388. * 5000000 : Maximum for TMC2xxx stepper drivers
  1389. * 1000000 : Maximum for LV8729 stepper driver
  1390. * 500000 : Maximum for A4988 stepper driver
  1391. * 250000 : Maximum for DRV8825 stepper driver
  1392. * 150000 : Maximum for TB6600 stepper driver
  1393. * 15000 : Maximum for TB6560 stepper driver
  1394. *
  1395. * Override the default value based on the driver type set in Configuration.h.
  1396. */
  1397. //#define MAXIMUM_STEPPER_RATE 250000
  1398. // @section temperature
  1399. // Control heater 0 and heater 1 in parallel.
  1400. //#define HEATERS_PARALLEL
  1401. //===========================================================================
  1402. //================================= Buffers =================================
  1403. //===========================================================================
  1404. // @section hidden
  1405. // The number of linear motions that can be in the plan at any give time.
  1406. // THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering.
  1407. #if ENABLED(SDSUPPORT)
  1408. #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
  1409. #else
  1410. #define BLOCK_BUFFER_SIZE 16 // maximize block buffer
  1411. #endif
  1412. // @section serial
  1413. // The ASCII buffer for serial input
  1414. #define MAX_CMD_SIZE 96
  1415. #define BUFSIZE 4
  1416. // Transmission to Host Buffer Size
  1417. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
  1418. // To buffer a simple "ok" you need 4 bytes.
  1419. // For ADVANCED_OK (M105) you need 32 bytes.
  1420. // For debug-echo: 128 bytes for the optimal speed.
  1421. // Other output doesn't need to be that speedy.
  1422. // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
  1423. #define TX_BUFFER_SIZE 0
  1424. // Host Receive Buffer Size
  1425. // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
  1426. // To use flow control, set this buffer size to at least 1024 bytes.
  1427. // :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
  1428. //#define RX_BUFFER_SIZE 1024
  1429. #if RX_BUFFER_SIZE >= 1024
  1430. // Enable to have the controller send XON/XOFF control characters to
  1431. // the host to signal the RX buffer is becoming full.
  1432. //#define SERIAL_XON_XOFF
  1433. #endif
  1434. // Add M575 G-code to change the baud rate
  1435. //#define BAUD_RATE_GCODE
  1436. #if ENABLED(SDSUPPORT)
  1437. // Enable this option to collect and display the maximum
  1438. // RX queue usage after transferring a file to SD.
  1439. //#define SERIAL_STATS_MAX_RX_QUEUED
  1440. // Enable this option to collect and display the number
  1441. // of dropped bytes after a file transfer to SD.
  1442. //#define SERIAL_STATS_DROPPED_RX
  1443. #endif
  1444. // Enable an emergency-command parser to intercept certain commands as they
  1445. // enter the serial receive buffer, so they cannot be blocked.
  1446. // Currently handles M108, M112, M410
  1447. // Does not work on boards using AT90USB (USBCON) processors!
  1448. //#define EMERGENCY_PARSER
  1449. // Bad Serial-connections can miss a received command by sending an 'ok'
  1450. // Therefore some clients abort after 30 seconds in a timeout.
  1451. // Some other clients start sending commands while receiving a 'wait'.
  1452. // This "wait" is only sent when the buffer is empty. 1 second is a good value here.
  1453. //#define NO_TIMEOUTS 1000 // Milliseconds
  1454. // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
  1455. //#define ADVANCED_OK
  1456. // Printrun may have trouble receiving long strings all at once.
  1457. // This option inserts short delays between lines of serial output.
  1458. #define SERIAL_OVERRUN_PROTECTION
  1459. // @section extras
  1460. /**
  1461. * Extra Fan Speed
  1462. * Adds a secondary fan speed for each print-cooling fan.
  1463. * 'M106 P<fan> T3-255' : Set a secondary speed for <fan>
  1464. * 'M106 P<fan> T2' : Use the set secondary speed
  1465. * 'M106 P<fan> T1' : Restore the previous fan speed
  1466. */
  1467. //#define EXTRA_FAN_SPEED
  1468. /**
  1469. * Firmware-based and LCD-controlled retract
  1470. *
  1471. * Add G10 / G11 commands for automatic firmware-based retract / recover.
  1472. * Use M207 and M208 to define parameters for retract / recover.
  1473. *
  1474. * Use M209 to enable or disable auto-retract.
  1475. * With auto-retract enabled, all G1 E moves within the set range
  1476. * will be converted to firmware-based retract/recover moves.
  1477. *
  1478. * Be sure to turn off auto-retract during filament change.
  1479. *
  1480. * Note that M207 / M208 / M209 settings are saved to EEPROM.
  1481. *
  1482. */
  1483. //#define FWRETRACT
  1484. #if ENABLED(FWRETRACT)
  1485. #define FWRETRACT_AUTORETRACT // Override slicer retractions
  1486. #if ENABLED(FWRETRACT_AUTORETRACT)
  1487. #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length
  1488. #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length
  1489. #endif
  1490. #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value)
  1491. #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value)
  1492. #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting
  1493. #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise
  1494. #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover)
  1495. #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange)
  1496. #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction
  1497. #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction
  1498. #if ENABLED(MIXING_EXTRUDER)
  1499. //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously
  1500. #endif
  1501. #endif
  1502. /**
  1503. * Universal tool change settings.
  1504. * Applies to all types of extruders except where explicitly noted.
  1505. */
  1506. #if EXTRUDERS > 1
  1507. // Z raise distance for tool-change, as needed for some extruders
  1508. #define TOOLCHANGE_ZRAISE 2 // (mm)
  1509. //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change
  1510. // Retract and prime filament on tool-change
  1511. //#define TOOLCHANGE_FILAMENT_SWAP
  1512. #if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
  1513. #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
  1514. #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm)
  1515. #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
  1516. #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
  1517. #endif
  1518. /**
  1519. * Position to park head during tool change.
  1520. * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
  1521. */
  1522. //#define TOOLCHANGE_PARK
  1523. #if ENABLED(TOOLCHANGE_PARK)
  1524. #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
  1525. #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
  1526. #endif
  1527. #endif
  1528. /**
  1529. * Advanced Pause
  1530. * Experimental feature for filament change support and for parking the nozzle when paused.
  1531. * Adds the GCode M600 for initiating filament change.
  1532. * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle.
  1533. *
  1534. * Requires an LCD display.
  1535. * Requires NOZZLE_PARK_FEATURE.
  1536. * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
  1537. */
  1538. //#define ADVANCED_PAUSE_FEATURE
  1539. #if ENABLED(ADVANCED_PAUSE_FEATURE)
  1540. #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
  1541. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
  1542. // This short retract is done immediately, before parking the nozzle.
  1543. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
  1544. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
  1545. #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
  1546. // For Bowden, the full length of the tube and nozzle.
  1547. // For direct drive, the full length of the nozzle.
  1548. // Set to 0 for manual unloading.
  1549. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load.
  1550. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material.
  1551. // 0 to disable start loading and skip to fast load only
  1552. #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
  1553. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
  1554. #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
  1555. // For Bowden, the full length of the tube and nozzle.
  1556. // For direct drive, the full length of the nozzle.
  1557. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
  1558. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
  1559. #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading.
  1560. // Set to 0 for manual extrusion.
  1561. // Filament can be extruded repeatedly from the Filament Change menu
  1562. // until extrusion is consistent, and to purge old filament.
  1563. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park.
  1564. //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused.
  1565. // Filament Unload does a Retract, Delay, and Purge first:
  1566. #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length.
  1567. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract.
  1568. #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
  1569. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload
  1570. #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
  1571. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
  1572. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
  1573. //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
  1574. //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
  1575. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
  1576. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
  1577. #endif
  1578. // @section tmc
  1579. /**
  1580. * TMC26X Stepper Driver options
  1581. *
  1582. * The TMC26XStepper library is required for this stepper driver.
  1583. * https://github.com/trinamic/TMC26XStepper
  1584. */
  1585. #if HAS_DRIVER(TMC26X)
  1586. #if AXIS_DRIVER_TYPE_X(TMC26X)
  1587. #define X_MAX_CURRENT 1000 // (mA)
  1588. #define X_SENSE_RESISTOR 91 // (mOhms)
  1589. #define X_MICROSTEPS 16 // Number of microsteps
  1590. #endif
  1591. #if AXIS_DRIVER_TYPE_X2(TMC26X)
  1592. #define X2_MAX_CURRENT 1000
  1593. #define X2_SENSE_RESISTOR 91
  1594. #define X2_MICROSTEPS 16
  1595. #endif
  1596. #if AXIS_DRIVER_TYPE_Y(TMC26X)
  1597. #define Y_MAX_CURRENT 1000
  1598. #define Y_SENSE_RESISTOR 91
  1599. #define Y_MICROSTEPS 16
  1600. #endif
  1601. #if AXIS_DRIVER_TYPE_Y2(TMC26X)
  1602. #define Y2_MAX_CURRENT 1000
  1603. #define Y2_SENSE_RESISTOR 91
  1604. #define Y2_MICROSTEPS 16
  1605. #endif
  1606. #if AXIS_DRIVER_TYPE_Z(TMC26X)
  1607. #define Z_MAX_CURRENT 1000
  1608. #define Z_SENSE_RESISTOR 91
  1609. #define Z_MICROSTEPS 16
  1610. #endif
  1611. #if AXIS_DRIVER_TYPE_Z2(TMC26X)
  1612. #define Z2_MAX_CURRENT 1000
  1613. #define Z2_SENSE_RESISTOR 91
  1614. #define Z2_MICROSTEPS 16
  1615. #endif
  1616. #if AXIS_DRIVER_TYPE_Z3(TMC26X)
  1617. #define Z3_MAX_CURRENT 1000
  1618. #define Z3_SENSE_RESISTOR 91
  1619. #define Z3_MICROSTEPS 16
  1620. #endif
  1621. #if AXIS_DRIVER_TYPE_E0(TMC26X)
  1622. #define E0_MAX_CURRENT 1000
  1623. #define E0_SENSE_RESISTOR 91
  1624. #define E0_MICROSTEPS 16
  1625. #endif
  1626. #if AXIS_DRIVER_TYPE_E1(TMC26X)
  1627. #define E1_MAX_CURRENT 1000
  1628. #define E1_SENSE_RESISTOR 91
  1629. #define E1_MICROSTEPS 16
  1630. #endif
  1631. #if AXIS_DRIVER_TYPE_E2(TMC26X)
  1632. #define E2_MAX_CURRENT 1000
  1633. #define E2_SENSE_RESISTOR 91
  1634. #define E2_MICROSTEPS 16
  1635. #endif
  1636. #if AXIS_DRIVER_TYPE_E3(TMC26X)
  1637. #define E3_MAX_CURRENT 1000
  1638. #define E3_SENSE_RESISTOR 91
  1639. #define E3_MICROSTEPS 16
  1640. #endif
  1641. #if AXIS_DRIVER_TYPE_E4(TMC26X)
  1642. #define E4_MAX_CURRENT 1000
  1643. #define E4_SENSE_RESISTOR 91
  1644. #define E4_MICROSTEPS 16
  1645. #endif
  1646. #if AXIS_DRIVER_TYPE_E5(TMC26X)
  1647. #define E5_MAX_CURRENT 1000
  1648. #define E5_SENSE_RESISTOR 91
  1649. #define E5_MICROSTEPS 16
  1650. #endif
  1651. #endif // TMC26X
  1652. // @section tmc_smart
  1653. /**
  1654. * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
  1655. * connect your SPI pins to the hardware SPI interface on your board and define
  1656. * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3
  1657. * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  1658. * You may also use software SPI if you wish to use general purpose IO pins.
  1659. *
  1660. * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN
  1661. * to the driver side PDN_UART pin with a 1K resistor.
  1662. * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without
  1663. * a resistor.
  1664. * The drivers can also be used with hardware serial.
  1665. *
  1666. * TMCStepper library is required to use TMC stepper drivers.
  1667. * https://github.com/teemuatlut/TMCStepper
  1668. */
  1669. #if HAS_TRINAMIC
  1670. #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
  1671. #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256
  1672. #if AXIS_IS_TMC(X)
  1673. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
  1674. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing
  1675. #define X_MICROSTEPS 16 // 0..256
  1676. #define X_RSENSE 0.11
  1677. #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ...
  1678. #endif
  1679. #if AXIS_IS_TMC(X2)
  1680. #define X2_CURRENT 800
  1681. #define X2_CURRENT_HOME X2_CURRENT
  1682. #define X2_MICROSTEPS 16
  1683. #define X2_RSENSE 0.11
  1684. #define X2_CHAIN_POS -1
  1685. #endif
  1686. #if AXIS_IS_TMC(Y)
  1687. #define Y_CURRENT 800
  1688. #define Y_CURRENT_HOME Y_CURRENT
  1689. #define Y_MICROSTEPS 16
  1690. #define Y_RSENSE 0.11
  1691. #define Y_CHAIN_POS -1
  1692. #endif
  1693. #if AXIS_IS_TMC(Y2)
  1694. #define Y2_CURRENT 800
  1695. #define Y2_CURRENT_HOME Y2_CURRENT
  1696. #define Y2_MICROSTEPS 16
  1697. #define Y2_RSENSE 0.11
  1698. #define Y2_CHAIN_POS -1
  1699. #endif
  1700. #if AXIS_IS_TMC(Z)
  1701. #define Z_CURRENT 800
  1702. #define Z_CURRENT_HOME Z_CURRENT
  1703. #define Z_MICROSTEPS 16
  1704. #define Z_RSENSE 0.11
  1705. #define Z_CHAIN_POS -1
  1706. #endif
  1707. #if AXIS_IS_TMC(Z2)
  1708. #define Z2_CURRENT 800
  1709. #define Z2_CURRENT_HOME Z2_CURRENT
  1710. #define Z2_MICROSTEPS 16
  1711. #define Z2_RSENSE 0.11
  1712. #define Z2_CHAIN_POS -1
  1713. #endif
  1714. #if AXIS_IS_TMC(Z3)
  1715. #define Z3_CURRENT 800
  1716. #define Z3_CURRENT_HOME Z3_CURRENT
  1717. #define Z3_MICROSTEPS 16
  1718. #define Z3_RSENSE 0.11
  1719. #define Z3_CHAIN_POS -1
  1720. #endif
  1721. #if AXIS_IS_TMC(E0)
  1722. #define E0_CURRENT 800
  1723. #define E0_MICROSTEPS 16
  1724. #define E0_RSENSE 0.11
  1725. #define E0_CHAIN_POS -1
  1726. #endif
  1727. #if AXIS_IS_TMC(E1)
  1728. #define E1_CURRENT 800
  1729. #define E1_MICROSTEPS 16
  1730. #define E1_RSENSE 0.11
  1731. #define E1_CHAIN_POS -1
  1732. #endif
  1733. #if AXIS_IS_TMC(E2)
  1734. #define E2_CURRENT 800
  1735. #define E2_MICROSTEPS 16
  1736. #define E2_RSENSE 0.11
  1737. #define E2_CHAIN_POS -1
  1738. #endif
  1739. #if AXIS_IS_TMC(E3)
  1740. #define E3_CURRENT 800
  1741. #define E3_MICROSTEPS 16
  1742. #define E3_RSENSE 0.11
  1743. #define E3_CHAIN_POS -1
  1744. #endif
  1745. #if AXIS_IS_TMC(E4)
  1746. #define E4_CURRENT 800
  1747. #define E4_MICROSTEPS 16
  1748. #define E4_RSENSE 0.11
  1749. #define E4_CHAIN_POS -1
  1750. #endif
  1751. #if AXIS_IS_TMC(E5)
  1752. #define E5_CURRENT 800
  1753. #define E5_MICROSTEPS 16
  1754. #define E5_RSENSE 0.11
  1755. #define E5_CHAIN_POS -1
  1756. #endif
  1757. /**
  1758. * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
  1759. * The default pins can be found in your board's pins file.
  1760. */
  1761. //#define X_CS_PIN -1
  1762. //#define Y_CS_PIN -1
  1763. //#define Z_CS_PIN -1
  1764. //#define X2_CS_PIN -1
  1765. //#define Y2_CS_PIN -1
  1766. //#define Z2_CS_PIN -1
  1767. //#define Z3_CS_PIN -1
  1768. //#define E0_CS_PIN -1
  1769. //#define E1_CS_PIN -1
  1770. //#define E2_CS_PIN -1
  1771. //#define E3_CS_PIN -1
  1772. //#define E4_CS_PIN -1
  1773. //#define E5_CS_PIN -1
  1774. /**
  1775. * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160).
  1776. * The default SW SPI pins are defined the respective pins files,
  1777. * but you can override or define them here.
  1778. */
  1779. //#define TMC_USE_SW_SPI
  1780. //#define TMC_SW_MOSI -1
  1781. //#define TMC_SW_MISO -1
  1782. //#define TMC_SW_SCK -1
  1783. /**
  1784. * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
  1785. * Set the address using jumpers on pins MS1 and MS2.
  1786. * Address | MS1 | MS2
  1787. * 0 | LOW | LOW
  1788. * 1 | HIGH | LOW
  1789. * 2 | LOW | HIGH
  1790. * 3 | HIGH | HIGH
  1791. *
  1792. * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
  1793. * on the same serial port, either here or in your board's pins file.
  1794. */
  1795. #define X_SLAVE_ADDRESS 0
  1796. #define Y_SLAVE_ADDRESS 0
  1797. #define Z_SLAVE_ADDRESS 0
  1798. #define X2_SLAVE_ADDRESS 0
  1799. #define Y2_SLAVE_ADDRESS 0
  1800. #define Z2_SLAVE_ADDRESS 0
  1801. #define Z3_SLAVE_ADDRESS 0
  1802. #define E0_SLAVE_ADDRESS 0
  1803. #define E1_SLAVE_ADDRESS 0
  1804. #define E2_SLAVE_ADDRESS 0
  1805. #define E3_SLAVE_ADDRESS 0
  1806. #define E4_SLAVE_ADDRESS 0
  1807. #define E5_SLAVE_ADDRESS 0
  1808. /**
  1809. * Software enable
  1810. *
  1811. * Use for drivers that do not use a dedicated enable pin, but rather handle the same
  1812. * function through a communication line such as SPI or UART.
  1813. */
  1814. //#define SOFTWARE_DRIVER_ENABLE
  1815. /**
  1816. * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
  1817. * Use Trinamic's ultra quiet stepping mode.
  1818. * When disabled, Marlin will use spreadCycle stepping mode.
  1819. */
  1820. #define STEALTHCHOP_XY
  1821. #define STEALTHCHOP_Z
  1822. #define STEALTHCHOP_E
  1823. /**
  1824. * Optimize spreadCycle chopper parameters by using predefined parameter sets
  1825. * or with the help of an example included in the library.
  1826. * Provided parameter sets are
  1827. * CHOPPER_DEFAULT_12V
  1828. * CHOPPER_DEFAULT_19V
  1829. * CHOPPER_DEFAULT_24V
  1830. * CHOPPER_DEFAULT_36V
  1831. * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
  1832. * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
  1833. *
  1834. * Define you own with
  1835. * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
  1836. */
  1837. #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
  1838. /**
  1839. * Monitor Trinamic drivers for error conditions,
  1840. * like overtemperature and short to ground.
  1841. * In the case of overtemperature Marlin can decrease the driver current until error condition clears.
  1842. * Other detected conditions can be used to stop the current print.
  1843. * Relevant g-codes:
  1844. * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
  1845. * M911 - Report stepper driver overtemperature pre-warn condition.
  1846. * M912 - Clear stepper driver overtemperature pre-warn condition flag.
  1847. * M122 - Report driver parameters (Requires TMC_DEBUG)
  1848. */
  1849. //#define MONITOR_DRIVER_STATUS
  1850. #if ENABLED(MONITOR_DRIVER_STATUS)
  1851. #define CURRENT_STEP_DOWN 50 // [mA]
  1852. #define REPORT_CURRENT_CHANGE
  1853. #define STOP_ON_ERROR
  1854. #endif
  1855. /**
  1856. * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
  1857. * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
  1858. * This mode allows for faster movements at the expense of higher noise levels.
  1859. * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD.
  1860. * M913 X/Y/Z/E to live tune the setting
  1861. */
  1862. //#define HYBRID_THRESHOLD
  1863. #define X_HYBRID_THRESHOLD 100 // [mm/s]
  1864. #define X2_HYBRID_THRESHOLD 100
  1865. #define Y_HYBRID_THRESHOLD 100
  1866. #define Y2_HYBRID_THRESHOLD 100
  1867. #define Z_HYBRID_THRESHOLD 3
  1868. #define Z2_HYBRID_THRESHOLD 3
  1869. #define Z3_HYBRID_THRESHOLD 3
  1870. #define E0_HYBRID_THRESHOLD 30
  1871. #define E1_HYBRID_THRESHOLD 30
  1872. #define E2_HYBRID_THRESHOLD 30
  1873. #define E3_HYBRID_THRESHOLD 30
  1874. #define E4_HYBRID_THRESHOLD 30
  1875. #define E5_HYBRID_THRESHOLD 30
  1876. /**
  1877. * Use StallGuard2 to home / probe X, Y, Z.
  1878. *
  1879. * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only
  1880. * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin.
  1881. * X, Y, and Z homing will always be done in spreadCycle mode.
  1882. *
  1883. * X/Y/Z_STALL_SENSITIVITY is the default stall threshold.
  1884. * Use M914 X Y Z to set the stall threshold at runtime:
  1885. *
  1886. * Sensitivity TMC2209 Others
  1887. * HIGHEST 255 -64 (Too sensitive => False positive)
  1888. * LOWEST 0 63 (Too insensitive => No trigger)
  1889. *
  1890. * It is recommended to set [XYZ]_HOME_BUMP_MM to 0.
  1891. *
  1892. * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only ***
  1893. * Poll the driver through SPI to determine load when homing.
  1894. * Removes the need for a wire from DIAG1 to an endstop pin.
  1895. *
  1896. * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when
  1897. * homing and adds a guard period for endstop triggering.
  1898. */
  1899. //#define SENSORLESS_HOMING // StallGuard capable drivers only
  1900. /**
  1901. * Use StallGuard2 to probe the bed with the nozzle.
  1902. *
  1903. * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
  1904. * to move the Z axis. Take extreme care when attempting to enable this feature.
  1905. */
  1906. //#define SENSORLESS_PROBING // StallGuard capable drivers only
  1907. #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
  1908. // TMC2209: 0...255. TMC2130: -64...63
  1909. #define X_STALL_SENSITIVITY 8
  1910. #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY
  1911. #define Y_STALL_SENSITIVITY 8
  1912. //#define Z_STALL_SENSITIVITY 8
  1913. //#define SPI_ENDSTOPS // TMC2130 only
  1914. //#define IMPROVE_HOMING_RELIABILITY
  1915. #endif
  1916. /**
  1917. * Beta feature!
  1918. * Create a 50/50 square wave step pulse optimal for stepper drivers.
  1919. */
  1920. //#define SQUARE_WAVE_STEPPING
  1921. /**
  1922. * Enable M122 debugging command for TMC stepper drivers.
  1923. * M122 S0/1 will enable continous reporting.
  1924. */
  1925. //#define TMC_DEBUG
  1926. /**
  1927. * You can set your own advanced settings by filling in predefined functions.
  1928. * A list of available functions can be found on the library github page
  1929. * https://github.com/teemuatlut/TMCStepper
  1930. *
  1931. * Example:
  1932. * #define TMC_ADV() { \
  1933. * stepperX.diag0_otpw(1); \
  1934. * stepperY.intpol(0); \
  1935. * }
  1936. */
  1937. #define TMC_ADV() { }
  1938. #endif // HAS_TRINAMIC
  1939. // @section L64XX
  1940. /**
  1941. * L64XX Stepper Driver options
  1942. *
  1943. * Arduino-L6470 library (0.8.0 or higher) is required.
  1944. * https://github.com/ameyer/Arduino-L6470
  1945. *
  1946. * Requires the following to be defined in your pins_YOUR_BOARD file
  1947. * L6470_CHAIN_SCK_PIN
  1948. * L6470_CHAIN_MISO_PIN
  1949. * L6470_CHAIN_MOSI_PIN
  1950. * L6470_CHAIN_SS_PIN
  1951. * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset
  1952. */
  1953. #if HAS_L64XX
  1954. //#define L6470_CHITCHAT // Display additional status info
  1955. #if AXIS_IS_L64XX(X)
  1956. #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16
  1957. #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current
  1958. // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down
  1959. // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down
  1960. #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down)
  1961. // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down
  1962. // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down
  1963. // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current
  1964. #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474
  1965. #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI
  1966. #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest
  1967. #endif
  1968. #if AXIS_IS_L64XX(X2)
  1969. #define X2_MICROSTEPS 128
  1970. #define X2_OVERCURRENT 2000
  1971. #define X2_STALLCURRENT 1500
  1972. #define X2_MAX_VOLTAGE 127
  1973. #define X2_CHAIN_POS -1
  1974. #define X2_SLEW_RATE 1
  1975. #endif
  1976. #if AXIS_IS_L64XX(Y)
  1977. #define Y_MICROSTEPS 128
  1978. #define Y_OVERCURRENT 2000
  1979. #define Y_STALLCURRENT 1500
  1980. #define Y_MAX_VOLTAGE 127
  1981. #define Y_CHAIN_POS -1
  1982. #define Y_SLEW_RATE 1
  1983. #endif
  1984. #if AXIS_IS_L64XX(Y2)
  1985. #define Y2_MICROSTEPS 128
  1986. #define Y2_OVERCURRENT 2000
  1987. #define Y2_STALLCURRENT 1500
  1988. #define Y2_MAX_VOLTAGE 127
  1989. #define Y2_CHAIN_POS -1
  1990. #define Y2_SLEW_RATE 1
  1991. #endif
  1992. #if AXIS_IS_L64XX(Z)
  1993. #define Z_MICROSTEPS 128
  1994. #define Z_OVERCURRENT 2000
  1995. #define Z_STALLCURRENT 1500
  1996. #define Z_MAX_VOLTAGE 127
  1997. #define Z_CHAIN_POS -1
  1998. #define Z_SLEW_RATE 1
  1999. #endif
  2000. #if AXIS_IS_L64XX(Z2)
  2001. #define Z2_MICROSTEPS 128
  2002. #define Z2_OVERCURRENT 2000
  2003. #define Z2_STALLCURRENT 1500
  2004. #define Z2_MAX_VOLTAGE 127
  2005. #define Z2_CHAIN_POS -1
  2006. #define Z2_SLEW_RATE 1
  2007. #endif
  2008. #if AXIS_IS_L64XX(Z3)
  2009. #define Z3_MICROSTEPS 128
  2010. #define Z3_OVERCURRENT 2000
  2011. #define Z3_STALLCURRENT 1500
  2012. #define Z3_MAX_VOLTAGE 127
  2013. #define Z3_CHAIN_POS -1
  2014. #define Z3_SLEW_RATE 1
  2015. #endif
  2016. #if AXIS_IS_L64XX(E0)
  2017. #define E0_MICROSTEPS 128
  2018. #define E0_OVERCURRENT 2000
  2019. #define E0_STALLCURRENT 1500
  2020. #define E0_MAX_VOLTAGE 127
  2021. #define E0_CHAIN_POS -1
  2022. #define E0_SLEW_RATE 1
  2023. #endif
  2024. #if AXIS_IS_L64XX(E1)
  2025. #define E1_MICROSTEPS 128
  2026. #define E1_OVERCURRENT 2000
  2027. #define E1_STALLCURRENT 1500
  2028. #define E1_MAX_VOLTAGE 127
  2029. #define E1_CHAIN_POS -1
  2030. #define E1_SLEW_RATE 1
  2031. #endif
  2032. #if AXIS_IS_L64XX(E2)
  2033. #define E2_MICROSTEPS 128
  2034. #define E2_OVERCURRENT 2000
  2035. #define E2_STALLCURRENT 1500
  2036. #define E2_MAX_VOLTAGE 127
  2037. #define E2_CHAIN_POS -1
  2038. #define E2_SLEW_RATE 1
  2039. #endif
  2040. #if AXIS_IS_L64XX(E3)
  2041. #define E3_MICROSTEPS 128
  2042. #define E3_OVERCURRENT 2000
  2043. #define E3_STALLCURRENT 1500
  2044. #define E3_MAX_VOLTAGE 127
  2045. #define E3_CHAIN_POS -1
  2046. #define E3_SLEW_RATE 1
  2047. #endif
  2048. #if AXIS_IS_L64XX(E4)
  2049. #define E4_MICROSTEPS 128
  2050. #define E4_OVERCURRENT 2000
  2051. #define E4_STALLCURRENT 1500
  2052. #define E4_MAX_VOLTAGE 127
  2053. #define E4_CHAIN_POS -1
  2054. #define E4_SLEW_RATE 1
  2055. #endif
  2056. #if AXIS_IS_L64XX(E5)
  2057. #define E5_MICROSTEPS 128
  2058. #define E5_OVERCURRENT 2000
  2059. #define E5_STALLCURRENT 1500
  2060. #define E5_MAX_VOLTAGE 127
  2061. #define E5_CHAIN_POS -1
  2062. #define E5_SLEW_RATE 1
  2063. #endif
  2064. /**
  2065. * Monitor L6470 drivers for error conditions like over temperature and over current.
  2066. * In the case of over temperature Marlin can decrease the drive until the error condition clears.
  2067. * Other detected conditions can be used to stop the current print.
  2068. * Relevant g-codes:
  2069. * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given.
  2070. * I not present or I0 or I1 - X, Y, Z or E0
  2071. * I2 - X2, Y2, Z2 or E1
  2072. * I3 - Z3 or E3
  2073. * I4 - E4
  2074. * I5 - E5
  2075. * M916 - Increase drive level until get thermal warning
  2076. * M917 - Find minimum current thresholds
  2077. * M918 - Increase speed until max or error
  2078. * M122 S0/1 - Report driver parameters
  2079. */
  2080. //#define MONITOR_L6470_DRIVER_STATUS
  2081. #if ENABLED(MONITOR_L6470_DRIVER_STATUS)
  2082. #define KVAL_HOLD_STEP_DOWN 1
  2083. //#define L6470_STOP_ON_ERROR
  2084. #endif
  2085. #endif // HAS_L64XX
  2086. /**
  2087. * TWI/I2C BUS
  2088. *
  2089. * This feature is an EXPERIMENTAL feature so it shall not be used on production
  2090. * machines. Enabling this will allow you to send and receive I2C data from slave
  2091. * devices on the bus.
  2092. *
  2093. * ; Example #1
  2094. * ; This macro send the string "Marlin" to the slave device with address 0x63 (99)
  2095. * ; It uses multiple M260 commands with one B<base 10> arg
  2096. * M260 A99 ; Target slave address
  2097. * M260 B77 ; M
  2098. * M260 B97 ; a
  2099. * M260 B114 ; r
  2100. * M260 B108 ; l
  2101. * M260 B105 ; i
  2102. * M260 B110 ; n
  2103. * M260 S1 ; Send the current buffer
  2104. *
  2105. * ; Example #2
  2106. * ; Request 6 bytes from slave device with address 0x63 (99)
  2107. * M261 A99 B5
  2108. *
  2109. * ; Example #3
  2110. * ; Example serial output of a M261 request
  2111. * echo:i2c-reply: from:99 bytes:5 data:hello
  2112. */
  2113. // @section i2cbus
  2114. //#define EXPERIMENTAL_I2CBUS
  2115. #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
  2116. // @section extras
  2117. /**
  2118. * Photo G-code
  2119. * Add the M240 G-code to take a photo.
  2120. * The photo can be triggered by a digital pin or a physical movement.
  2121. */
  2122. //#define PHOTO_GCODE
  2123. #if ENABLED(PHOTO_GCODE)
  2124. // A position to move to (and raise Z) before taking the photo
  2125. //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z)
  2126. //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P)
  2127. //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S)
  2128. // Canon RC-1 or homebrew digital camera trigger
  2129. // Data from: http://www.doc-diy.net/photo/rc-1_hacked/
  2130. //#define PHOTOGRAPH_PIN 23
  2131. // Canon Hack Development Kit
  2132. // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
  2133. //#define CHDK_PIN 4
  2134. // Optional second move with delay to trigger the camera shutter
  2135. //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J)
  2136. // Duration to hold the switch or keep CHDK_PIN high
  2137. //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D)
  2138. #endif
  2139. /**
  2140. * Spindle & Laser control
  2141. *
  2142. * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and
  2143. * to set spindle speed, spindle direction, and laser power.
  2144. *
  2145. * SuperPid is a router/spindle speed controller used in the CNC milling community.
  2146. * Marlin can be used to turn the spindle on and off. It can also be used to set
  2147. * the spindle speed from 5,000 to 30,000 RPM.
  2148. *
  2149. * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V
  2150. * hardware PWM pin for the speed control and a pin for the rotation direction.
  2151. *
  2152. * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
  2153. */
  2154. //#define SPINDLE_FEATURE
  2155. //#define LASER_FEATURE
  2156. #if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
  2157. #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
  2158. #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
  2159. #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
  2160. #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
  2161. #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
  2162. #if ENABLED(SPINDLE_FEATURE)
  2163. //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
  2164. #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
  2165. #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
  2166. /**
  2167. * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
  2168. *
  2169. * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
  2170. * where PWM duty cycle varies from 0 to 255
  2171. *
  2172. * set the following for your controller (ALL MUST BE SET)
  2173. */
  2174. #define SPEED_POWER_SLOPE 118.4
  2175. #define SPEED_POWER_INTERCEPT 0
  2176. #define SPEED_POWER_MIN 5000
  2177. #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
  2178. #else
  2179. #define SPEED_POWER_SLOPE 0.3922
  2180. #define SPEED_POWER_INTERCEPT 0
  2181. #define SPEED_POWER_MIN 10
  2182. #define SPEED_POWER_MAX 100 // 0-100%
  2183. #endif
  2184. #endif
  2185. /**
  2186. * Coolant Control
  2187. *
  2188. * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
  2189. *
  2190. * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
  2191. */
  2192. //#define COOLANT_CONTROL
  2193. #if ENABLED(COOLANT_CONTROL)
  2194. #define COOLANT_MIST // Enable if mist coolant is present
  2195. #define COOLANT_FLOOD // Enable if flood coolant is present
  2196. #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
  2197. #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
  2198. #endif
  2199. /**
  2200. * Filament Width Sensor
  2201. *
  2202. * Measures the filament width in real-time and adjusts
  2203. * flow rate to compensate for any irregularities.
  2204. *
  2205. * Also allows the measured filament diameter to set the
  2206. * extrusion rate, so the slicer only has to specify the
  2207. * volume.
  2208. *
  2209. * Only a single extruder is supported at this time.
  2210. *
  2211. * 34 RAMPS_14 : Analog input 5 on the AUX2 connector
  2212. * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E)
  2213. * 301 RAMBO : Analog input 3
  2214. *
  2215. * Note: May require analog pins to be defined for other boards.
  2216. */
  2217. //#define FILAMENT_WIDTH_SENSOR
  2218. #if ENABLED(FILAMENT_WIDTH_SENSOR)
  2219. #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
  2220. #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
  2221. #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it
  2222. #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM.
  2223. #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially
  2224. // Display filament width on the LCD status line. Status messages will expire after 5 seconds.
  2225. //#define FILAMENT_LCD_DISPLAY
  2226. #endif
  2227. /**
  2228. * CNC Coordinate Systems
  2229. *
  2230. * Enables G53 and G54-G59.3 commands to select coordinate systems
  2231. * and G92.1 to reset the workspace to native machine space.
  2232. */
  2233. //#define CNC_COORDINATE_SYSTEMS
  2234. /**
  2235. * Auto-report temperatures with M155 S<seconds>
  2236. */
  2237. #define AUTO_REPORT_TEMPERATURES
  2238. /**
  2239. * Include capabilities in M115 output
  2240. */
  2241. #define EXTENDED_CAPABILITIES_REPORT
  2242. /**
  2243. * Expected Printer Check
  2244. * Add the M16 G-code to compare a string to the MACHINE_NAME.
  2245. * M16 with a non-matching string causes the printer to halt.
  2246. */
  2247. //#define EXPECTED_PRINTER_CHECK
  2248. /**
  2249. * Disable all Volumetric extrusion options
  2250. */
  2251. //#define NO_VOLUMETRICS
  2252. #if DISABLED(NO_VOLUMETRICS)
  2253. /**
  2254. * Volumetric extrusion default state
  2255. * Activate to make volumetric extrusion the default method,
  2256. * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  2257. *
  2258. * M200 D0 to disable, M200 Dn to set a new diameter.
  2259. */
  2260. //#define VOLUMETRIC_DEFAULT_ON
  2261. #endif
  2262. /**
  2263. * Enable this option for a leaner build of Marlin that removes all
  2264. * workspace offsets, simplifying coordinate transformations, leveling, etc.
  2265. *
  2266. * - M206 and M428 are disabled.
  2267. * - G92 will revert to its behavior from Marlin 1.0.
  2268. */
  2269. //#define NO_WORKSPACE_OFFSETS
  2270. /**
  2271. * Set the number of proportional font spaces required to fill up a typical character space.
  2272. * This can help to better align the output of commands like `G29 O` Mesh Output.
  2273. *
  2274. * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
  2275. * Otherwise, adjust according to your client and font.
  2276. */
  2277. #define PROPORTIONAL_FONT_RATIO 1.0
  2278. /**
  2279. * Spend 28 bytes of SRAM to optimize the GCode parser
  2280. */
  2281. #define FASTER_GCODE_PARSER
  2282. /**
  2283. * CNC G-code options
  2284. * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
  2285. * Note that G0 feedrates should be used with care for 3D printing (if used at all).
  2286. * High feedrates may cause ringing and harm print quality.
  2287. */
  2288. //#define PAREN_COMMENTS // Support for parentheses-delimited comments
  2289. //#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
  2290. // Enable and set a (default) feedrate for all G0 moves
  2291. //#define G0_FEEDRATE 3000 // (mm/m)
  2292. #ifdef G0_FEEDRATE
  2293. //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
  2294. #endif
  2295. /**
  2296. * Startup commands
  2297. *
  2298. * Execute certain G-code commands immediately after power-on.
  2299. */
  2300. //#define STARTUP_COMMANDS "M17 Z"
  2301. /**
  2302. * G-code Macros
  2303. *
  2304. * Add G-codes M810-M819 to define and run G-code macros.
  2305. * Macros are not saved to EEPROM.
  2306. */
  2307. //#define GCODE_MACROS
  2308. #if ENABLED(GCODE_MACROS)
  2309. #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used
  2310. #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro
  2311. #endif
  2312. /**
  2313. * User-defined menu items that execute custom GCode
  2314. */
  2315. //#define CUSTOM_USER_MENUS
  2316. #if ENABLED(CUSTOM_USER_MENUS)
  2317. //#define CUSTOM_USER_MENU_TITLE "Custom Commands"
  2318. #define USER_SCRIPT_DONE "M117 User Script Done"
  2319. #define USER_SCRIPT_AUDIBLE_FEEDBACK
  2320. //#define USER_SCRIPT_RETURN // Return to status screen after a script
  2321. #define USER_DESC_1 "Home & UBL Info"
  2322. #define USER_GCODE_1 "G28\nG29 W"
  2323. #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
  2324. #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
  2325. #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
  2326. #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
  2327. #define USER_DESC_4 "Heat Bed/Home/Level"
  2328. #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
  2329. #define USER_DESC_5 "Home & Info"
  2330. #define USER_GCODE_5 "G28\nM503"
  2331. #endif
  2332. /**
  2333. * Host Action Commands
  2334. *
  2335. * Define host streamer action commands in compliance with the standard.
  2336. *
  2337. * See https://reprap.org/wiki/G-code#Action_commands
  2338. * Common commands ........ poweroff, pause, paused, resume, resumed, cancel
  2339. * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
  2340. *
  2341. * Some features add reason codes to extend these commands.
  2342. *
  2343. * Host Prompt Support enables Marlin to use the host for user prompts so
  2344. * filament runout and other processes can be managed from the host side.
  2345. */
  2346. //#define HOST_ACTION_COMMANDS
  2347. #if ENABLED(HOST_ACTION_COMMANDS)
  2348. //#define HOST_PROMPT_SUPPORT
  2349. #endif
  2350. /**
  2351. * Cancel Objects
  2352. *
  2353. * Implement M486 to allow Marlin to skip objects
  2354. */
  2355. //#define CANCEL_OBJECTS
  2356. /**
  2357. * I2C position encoders for closed loop control.
  2358. * Developed by Chris Barr at Aus3D.
  2359. *
  2360. * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder
  2361. * Github: https://github.com/Aus3D/MagneticEncoder
  2362. *
  2363. * Supplier: http://aus3d.com.au/magnetic-encoder-module
  2364. * Alternative Supplier: http://reliabuild3d.com/
  2365. *
  2366. * Reliabuild encoders have been modified to improve reliability.
  2367. */
  2368. //#define I2C_POSITION_ENCODERS
  2369. #if ENABLED(I2C_POSITION_ENCODERS)
  2370. #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5
  2371. // encoders supported currently.
  2372. #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200.
  2373. #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. <X|Y|Z|E>_AXIS.
  2374. #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or-
  2375. // I2CPE_ENC_TYPE_ROTARY.
  2376. #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for
  2377. // 1mm poles. For linear encoders this is ticks / mm,
  2378. // for rotary encoders this is ticks / revolution.
  2379. //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
  2380. // steps per full revolution (motor steps/rev * microstepping)
  2381. //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
  2382. #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
  2383. #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
  2384. // printer will attempt to correct the error; errors
  2385. // smaller than this are ignored to minimize effects of
  2386. // measurement noise / latency (filter).
  2387. #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2.
  2388. #define I2CPE_ENC_2_AXIS Y_AXIS
  2389. #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR
  2390. #define I2CPE_ENC_2_TICKS_UNIT 2048
  2391. //#define I2CPE_ENC_2_TICKS_REV (16 * 200)
  2392. //#define I2CPE_ENC_2_INVERT
  2393. #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP
  2394. #define I2CPE_ENC_2_EC_THRESH 0.10
  2395. #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options
  2396. #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below.
  2397. #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4.
  2398. #define I2CPE_ENC_4_AXIS E_AXIS
  2399. #define I2CPE_ENC_5_ADDR 34 // Encoder 5.
  2400. #define I2CPE_ENC_5_AXIS E_AXIS
  2401. // Default settings for encoders which are enabled, but without settings configured above.
  2402. #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR
  2403. #define I2CPE_DEF_ENC_TICKS_UNIT 2048
  2404. #define I2CPE_DEF_TICKS_REV (16 * 200)
  2405. #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE
  2406. #define I2CPE_DEF_EC_THRESH 0.1
  2407. //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
  2408. // axis after which the printer will abort. Comment out to
  2409. // disable abort behavior.
  2410. #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
  2411. // for this amount of time (in ms) before the encoder
  2412. // is trusted again.
  2413. /**
  2414. * Position is checked every time a new command is executed from the buffer but during long moves,
  2415. * this setting determines the minimum update time between checks. A value of 100 works well with
  2416. * error rolling average when attempting to correct only for skips and not for vibration.
  2417. */
  2418. #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks.
  2419. // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise.
  2420. #define I2CPE_ERR_ROLLING_AVERAGE
  2421. #endif // I2C_POSITION_ENCODERS
  2422. /**
  2423. * Analog Joystick(s)
  2424. */
  2425. //#define JOYSTICK
  2426. #if ENABLED(JOYSTICK)
  2427. #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2
  2428. #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2
  2429. #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
  2430. #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
  2431. //#define INVERT_JOY_X // Enable if X direction is reversed
  2432. //#define INVERT_JOY_Y // Enable if Y direction is reversed
  2433. //#define INVERT_JOY_Z // Enable if Z direction is reversed
  2434. // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
  2435. #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
  2436. #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
  2437. #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }
  2438. #endif
  2439. /**
  2440. * MAX7219 Debug Matrix
  2441. *
  2442. * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
  2443. * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
  2444. */
  2445. //#define MAX7219_DEBUG
  2446. #if ENABLED(MAX7219_DEBUG)
  2447. #define MAX7219_CLK_PIN 64
  2448. #define MAX7219_DIN_PIN 57
  2449. #define MAX7219_LOAD_PIN 44
  2450. //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix
  2451. #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral)
  2452. #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain.
  2453. #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°)
  2454. // connector at: right=0 bottom=-90 top=90 left=180
  2455. //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order
  2456. //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side
  2457. /**
  2458. * Sample debug features
  2459. * If you add more debug displays, be careful to avoid conflicts!
  2460. */
  2461. #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
  2462. #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row
  2463. #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row
  2464. #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row
  2465. // If you experience stuttering, reboots, etc. this option can reveal how
  2466. // tweaks made to the configuration are affecting the printer in real-time.
  2467. #endif
  2468. /**
  2469. * NanoDLP Sync support
  2470. *
  2471. * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  2472. * string to enable synchronization with DLP projector exposure. This change will allow to use
  2473. * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  2474. */
  2475. //#define NANODLP_Z_SYNC
  2476. #if ENABLED(NANODLP_Z_SYNC)
  2477. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
  2478. // Default behavior is limited to Z axis only.
  2479. #endif
  2480. /**
  2481. * WiFi Support (Espressif ESP32 WiFi)
  2482. */
  2483. //#define WIFISUPPORT // Marlin embedded WiFi managenent
  2484. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib)
  2485. #if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT)
  2486. #define WIFI_SSID "Wifi SSID"
  2487. #define WIFI_PWD "Wifi Password"
  2488. //#define WEBSUPPORT // Start a webserver (which may include auto-discovery)
  2489. //#define OTASUPPORT // Support over-the-air firmware updates
  2490. //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host
  2491. #endif
  2492. /**
  2493. * Prusa Multi-Material Unit v2
  2494. * Enable in Configuration.h
  2495. */
  2496. #if ENABLED(PRUSA_MMU2)
  2497. // Serial port used for communication with MMU2.
  2498. // For AVR enable the UART port used for the MMU. (e.g., internalSerial)
  2499. // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2)
  2500. #define INTERNAL_SERIAL_PORT 2
  2501. #define MMU2_SERIAL internalSerial
  2502. // Use hardware reset for MMU if a pin is defined for it
  2503. //#define MMU2_RST_PIN 23
  2504. // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up)
  2505. //#define MMU2_MODE_12V
  2506. // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout
  2507. #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600"
  2508. // Add an LCD menu for MMU2
  2509. //#define MMU2_MENUS
  2510. #if ENABLED(MMU2_MENUS)
  2511. // Settings for filament load / unload from the LCD menu.
  2512. // This is for Prusa MK3-style extruders. Customize for your hardware.
  2513. #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0
  2514. #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \
  2515. { 7.2, 562 }, \
  2516. { 14.4, 871 }, \
  2517. { 36.0, 1393 }, \
  2518. { 14.4, 871 }, \
  2519. { 50.0, 198 }
  2520. #define MMU2_RAMMING_SEQUENCE \
  2521. { 1.0, 1000 }, \
  2522. { 1.0, 1500 }, \
  2523. { 2.0, 2000 }, \
  2524. { 1.5, 3000 }, \
  2525. { 2.5, 4000 }, \
  2526. { -15.0, 5000 }, \
  2527. { -14.0, 1200 }, \
  2528. { -6.0, 600 }, \
  2529. { 10.0, 700 }, \
  2530. { -10.0, 400 }, \
  2531. { -50.0, 2000 }
  2532. #endif
  2533. //#define MMU2_DEBUG // Write debug info to serial output
  2534. #endif // PRUSA_MMU2
  2535. /**
  2536. * Advanced Print Counter settings
  2537. */
  2538. #if ENABLED(PRINTCOUNTER)
  2539. #define SERVICE_WARNING_BUZZES 3
  2540. // Activate up to 3 service interval watchdogs
  2541. //#define SERVICE_NAME_1 "Service S"
  2542. //#define SERVICE_INTERVAL_1 100 // print hours
  2543. //#define SERVICE_NAME_2 "Service L"
  2544. //#define SERVICE_INTERVAL_2 200 // print hours
  2545. //#define SERVICE_NAME_3 "Service 3"
  2546. //#define SERVICE_INTERVAL_3 1 // print hours
  2547. #endif
  2548. // @section develop
  2549. /**
  2550. * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
  2551. */
  2552. //#define PINS_DEBUGGING
  2553. // Enable Marlin dev mode which adds some special commands
  2554. //#define MARLIN_DEV_MODE