marlin/Marlin/src/lcd/dwin/dwin.cpp

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * DWIN by Creality3D
 */

#include "../../inc/MarlinConfigPre.h"

#if ENABLED(DWIN_CREALITY_LCD)

#include "dwin.h"

#include <WString.h>
#include <stdio.h>
#include <string.h>

#include "../fontutils.h"
#include "../ultralcd.h"

#include "../../sd/cardreader.h"

#include "../../MarlinCore.h"
#include "../../core/serial.h"
#include "../../core/macros.h"
#include "../../gcode/queue.h"

#include "../../feature/powerloss.h"
#include "../../feature/babystep.h"

#include "../../module/configuration_store.h"
#include "../../module/temperature.h"
#include "../../module/printcounter.h"
#include "../../module/motion.h"
#include "../../module/planner.h"

#if HAS_LEVELING
  #include "../../feature/bedlevel/bedlevel.h"
#endif

#if HAS_BED_PROBE
  #include "../../module/probe.h"
#endif

#include "../../libs/buzzer.h"

#define PAUSE_HEAT true

#define USE_STRING_HEADINGS

#define MENU_FONT   font8x16
#define STAT_FONT   font10x20
#define HEADER_FONT font10x20

constexpr uint16_t TROWS = 6, MROWS = TROWS - 1,          // Total rows, and other-than-Back
                   TITLE_HEIGHT = 30,                     // Title bar height
                   MLINE = 53,                            // Menu line height
                   LBLX = 60,                             // Menu item label X
                   MENU_CHR_W = 8, STAT_CHR_W = 10;

#define MBASE(L) (49+(L)*MLINE)

#define BABY_Z_VAR TERN(HAS_LEVELING, probe.offset.z, zprobe_zoffset)

/* Value Init */
HMI_value_t HMI_ValueStruct;
HMI_Flag    HMI_flag{0};

millis_t Encoder_ms = 0;
millis_t Wait_ms = 0;
millis_t heat_time = 0;

int checkkey = 0, last_checkkey = 0;

typedef struct {
  uint8_t now, last;
  void set(uint8_t v) { now = last = v; }
  void reset() { set(0); }
  bool changed() { bool c = (now != last); if (c) last = now; return c; }
  bool dec() { if (now) now--; return changed(); }
  bool inc(uint8_t v) { if (now < v) now++; else now = v; return changed(); }
} select_t;

select_t select_page{0}, select_file{0}, select_print{0}, select_prepare{0}
       , select_control{0}, select_axis{0}, select_temp{0}, select_motion{0}, select_tune{0}
       , select_PLA{0}, select_ABS{0}
       , select_speed{0}
       , select_acc{0}
       , select_corner{0}
       , select_step{0}
       //, select_leveling{0}
       ;

uint8_t index_file = MROWS,
        index_prepare = MROWS,
        index_control = MROWS,
        index_leveling = MROWS,
        index_tune = 5;

//char filebuf[50];

uint8_t countbuf = 0;

bool recovery_flag = false, abort_flag = false;

constexpr float default_max_feedrate[]        = DEFAULT_MAX_FEEDRATE;
constexpr float default_max_acceleration[]    = DEFAULT_MAX_ACCELERATION;
constexpr float default_max_jerk[]            = { DEFAULT_XJERK, DEFAULT_YJERK, DEFAULT_ZJERK, DEFAULT_EJERK };
constexpr float default_axis_steps_per_unit[] = DEFAULT_AXIS_STEPS_PER_UNIT;

uint8_t Percentrecord = 0;
uint16_t last_Printtime = 0, remain_time = 0;
float last_temp_hotend_target = 0, last_temp_bed_target = 0;
float last_temp_hotend_current = 0, last_temp_bed_current = 0;
uint8_t last_fan_speed = 0;
uint16_t last_speed = 0;

float last_E_scale = 0;

bool DWIN_lcd_sd_status = 0;

bool pause_action_flag = 0;

int temphot = 0, tempbed = 0;

float zprobe_zoffset = 0.00;
float last_zoffset = 0.00, last_probe_zoffset = 0.00;

#define FONT_EEPROM_OFFSET 0

void lcd_select_language(void) {
  BL24CXX::read(FONT_EEPROM_OFFSET, (uint8_t*)&HMI_flag.language_flag, sizeof(HMI_flag.language_flag));
  if (HMI_flag.language_flag)
    DWIN_JPG_CacheTo1(Language_Chinese);
  else
    DWIN_JPG_CacheTo1(Language_English);
}

void set_english_to_eeprom(void) {
  HMI_flag.language_flag = 0;
  DWIN_JPG_CacheTo1(Language_English);
  BL24CXX::write(FONT_EEPROM_OFFSET, (uint8_t*)&HMI_flag.language_flag, sizeof(HMI_flag.language_flag));
}
void set_chinese_to_eeprom(void) {
  HMI_flag.language_flag = 1;
  DWIN_JPG_CacheTo1(Language_Chinese);
  BL24CXX::write(FONT_EEPROM_OFFSET, (uint8_t*)&HMI_flag.language_flag, sizeof(HMI_flag.language_flag));
}

void show_plus_or_minus(uint8_t size, uint16_t bColor, uint8_t iNum, uint8_t fNum, uint16_t x, uint16_t y, long value) {
  if (value < 0) {
    DWIN_Draw_String(false,true,size,White,bColor, x-6, y, (char*)"-");
    DWIN_Draw_FloatValue(true,true,0,size,White,bColor, iNum, fNum, x, y, -value);
  }
  else {
    DWIN_Draw_String(false,true,size,White,bColor, x-6, y, (char*)" ");
    DWIN_Draw_FloatValue(true,true,0,size,White,bColor, iNum, fNum, x, y, value);
  }
}

void ICON_Print() {
  if (select_page.now == 0) {
    DWIN_ICON_Show(ICON,ICON_Print_1, 17, 130);
    if (HMI_flag.language_flag)
      DWIN_Frame_AreaCopy(1, 1, 447, 271-243, 479-19, 58, 201);
    else
      DWIN_Frame_AreaCopy(1, 1, 451, 271-240, 479-16, 72-15, 201);
  }
  else {
    DWIN_ICON_Show(ICON,ICON_Print_0, 17, 130);
    if (HMI_flag.language_flag)
      DWIN_Frame_AreaCopy(1, 1, 405, 271-243, 420, 58, 201);
    else
      DWIN_Frame_AreaCopy(1, 1, 423, 271-240, 423+12, 72-15, 201);
  }
}

void ICON_Prepare() {
  if (select_page.now == 1) {
    DWIN_ICON_Show(ICON,ICON_Prepare_1, 145, 130);
    if (HMI_flag.language_flag)
      DWIN_Frame_AreaCopy(1, 31, 447, 271-213, 479-19, 186, 201);
    else
      DWIN_Frame_AreaCopy(1, 33, 451, 271-189, 479-13, 200-25, 201);
  }
  else {
    DWIN_ICON_Show(ICON,ICON_Prepare_0, 145, 130);
    if (HMI_flag.language_flag)
      DWIN_Frame_AreaCopy(1, 31, 405, 271-213, 420, 186, 201);
    else
      DWIN_Frame_AreaCopy(1, 33, 423, 271-189, 423+15, 200-25, 201);
  }
}

void ICON_Control() {
  if (select_page.now == 2) {
    DWIN_ICON_Show(ICON,ICON_Control_1, 17, 246);
    if (HMI_flag.language_flag)
      DWIN_Frame_AreaCopy(1, 61, 447, 271-183, 479-19, 58, 318);
    else
      DWIN_Frame_AreaCopy(1, 85, 451, 271-139, 479-16, 72-24, 318);
  }
  else {
    DWIN_ICON_Show(ICON,ICON_Control_0, 17, 246);
    if (HMI_flag.language_flag)
      DWIN_Frame_AreaCopy(1, 61, 405, 271-183, 420, 58, 318);
    else
      DWIN_Frame_AreaCopy(1, 85, 423, 271-139, 479-45, 72-24, 318);
  }
}

void ICON_StartInfo(bool show) {
  if (show) {
    DWIN_ICON_Show(ICON,ICON_Info_1, 145, 246);
    if (HMI_flag.language_flag)
      DWIN_Frame_AreaCopy(1, 91, 447, 271-153, 479-19, 186, 318);
    else
      DWIN_Frame_AreaCopy(1, 132, 451, 159, 479-13, 186, 318);
  }
  else {
    DWIN_ICON_Show(ICON,ICON_Info_0, 145, 246);
    if (HMI_flag.language_flag)
      DWIN_Frame_AreaCopy(1, 91, 405, 271-153, 420, 186, 318);
    else
      DWIN_Frame_AreaCopy(1, 132, 423, 159, 423+12, 186, 318);
  }
}

void ICON_Leveling(bool show) {
  if (show) {
    DWIN_ICON_Show(ICON,ICON_Leveling_1, 145, 246);
    if (HMI_flag.language_flag)
      DWIN_Frame_AreaCopy(1, 211, 447, 238, 479-19, 186, 318);
    else
      DWIN_Frame_AreaCopy(1, 84, 437, 120,  449, 200-18, 318);
  }
  else {
    DWIN_ICON_Show(ICON,ICON_Leveling_0, 145, 246);
    if (HMI_flag.language_flag)
      DWIN_Frame_AreaCopy(1, 211, 405, 238, 420, 186, 318);
    else
      DWIN_Frame_AreaCopy(1, 84, 465, 120, 478, 200-18, 318);
  }
}

void ICON_Tune() {
  if (select_print.now == 0) {
    DWIN_ICON_Show(ICON,ICON_Setup_1, 8, 252);
    if (HMI_flag.language_flag)
      DWIN_Frame_AreaCopy(1, 121, 447, 271-123, 479-21, 34, 325);
    else
      DWIN_Frame_AreaCopy(1, 1, 465, 271-237, 479-2, 48-17, 325);
  }
  else {
    DWIN_ICON_Show(ICON,ICON_Setup_0, 8, 252);
    if (HMI_flag.language_flag)
      DWIN_Frame_AreaCopy(1, 121, 405, 271-123, 420, 34, 325);
    else
      DWIN_Frame_AreaCopy(1, 1, 438, 271-239, 479-31, 48-17, 325);
  }
}

void ICON_Pause() {
  if (select_print.now == 1) {
    DWIN_ICON_Show(ICON,ICON_Pause_1, 96, 252);
    if (HMI_flag.language_flag)
      DWIN_Frame_AreaCopy(1, 181, 447, 271-63, 479-20, 124, 325);
    else
      DWIN_Frame_AreaCopy(1, 177, 451, 271-55, 479-17, 136-20, 325);
  }
  else {
    DWIN_ICON_Show(ICON,ICON_Pause_0, 96, 252);
    if (HMI_flag.language_flag)
      DWIN_Frame_AreaCopy(1, 181, 405, 271-63, 420, 124, 325);
    else
      DWIN_Frame_AreaCopy(1, 177, 423, 271-56, 479-46, 136-20, 325);
  }
}

void ICON_Continue() {
  if (select_print.now == 1) {
    DWIN_ICON_Show(ICON,ICON_Continue_1, 96, 252);
    if (HMI_flag.language_flag)
      DWIN_Frame_AreaCopy(1, 1, 447, 271-243, 479-19, 124, 325);
    else
      DWIN_Frame_AreaCopy(1, 1, 451, 271-239, 479-16, 136-15, 325);
  }
  else {
    DWIN_ICON_Show(ICON,ICON_Continue_0, 96, 252);
    if (HMI_flag.language_flag)
      DWIN_Frame_AreaCopy(1, 1, 405, 271-243, 420, 124, 325);
    else
      DWIN_Frame_AreaCopy(1, 1, 424, 271-240, 479-45, 136-15, 325);
  }
}

void ICON_Stop() {
  if (select_print.now == 2) {
    DWIN_ICON_Show(ICON,ICON_Stop_1, 184, 252);
    if (HMI_flag.language_flag)
      DWIN_Frame_AreaCopy(1, 151, 447, 271-93, 479-20, 210, 325);
    else
      DWIN_Frame_AreaCopy(1, 218, 451, 271-22, 479-14, 224-15, 325);
  }
  else {
    DWIN_ICON_Show(ICON,ICON_Stop_0, 184, 252);
    if (HMI_flag.language_flag)
      DWIN_Frame_AreaCopy(1, 151, 405, 271-93, 420, 210, 325);
    else
      DWIN_Frame_AreaCopy(1, 218, 423, 271-24, 479-43, 224-15, 325);
  }
}

inline void Clear_Title_Bar(void) {
  DWIN_Draw_Rectangle(1, Background_blue,   0,  0,  DWIN_WIDTH,  30);
}

inline void Draw_Title(const char * const title) {
  DWIN_Draw_String(false,false,HEADER_FONT,White,Background_blue, 14, 4, (char*)title);
}

inline void Clear_Menu_Area(void) {
  DWIN_Draw_Rectangle(1, Background_black,  0,  31, 272,  360);
}

inline void Clear_Main_Window(void) {
  Clear_Title_Bar();
  Clear_Menu_Area();
}

inline void Clear_Popup_Area(void) {
  Clear_Title_Bar();
  DWIN_Draw_Rectangle(1, Background_black,  0,  31, 272,  480);
}

void Draw_Popup_Bkgd_105(void) {
  DWIN_Draw_Rectangle(1, Background_window, 14, 105, 271-13, 479-105);
}

inline void Draw_More_Icon(const uint8_t line) {
  DWIN_ICON_Show(ICON, ICON_More, 226, 46+line*MLINE);
}

inline void Draw_Menu_Cursor(const uint8_t line) {
  //DWIN_ICON_Show(ICON,ICON_Rectangle, 0, 31+line*MLINE);
  DWIN_Draw_Rectangle(1, Rectangle_Color, 0, 31+line*MLINE, 14, 31+(line+1)*MLINE-2);
}

inline void Erase_Menu_Cursor(const uint8_t line) {
  DWIN_Draw_Rectangle(1, Background_black, 0, 31+line*MLINE, 14, 31+(line+1)*MLINE-2);
}

inline void Move_Highlight(const int16_t from, const uint16_t newline) {
  Erase_Menu_Cursor(newline - from);
  Draw_Menu_Cursor(newline);
}

inline void Add_Menu_Line() {
  Move_Highlight(1, MROWS);
  DWIN_Draw_Line(Line_Color, 16, 82+MROWS*MLINE, 256, 83+MROWS*MLINE);
}

inline void Scroll_Menu(const uint8_t dir) {
  DWIN_Frame_AreaMove(1, dir, MLINE, Background_black, 0, 31, 272, 349);
  switch (dir) {
    case DWIN_SCROLL_DOWN: Move_Highlight(-1, 0); break;
    case DWIN_SCROLL_UP:   Add_Menu_Line(); break;
  }
}

inline uint16_t nr_sd_menu_items() {
  return card.get_num_Files() + !card.flag.workDirIsRoot;
}

inline void Draw_Menu_Icon(const uint8_t line, const uint8_t icon) {
  DWIN_ICON_Show(ICON, icon, 26, 46+line*MLINE);
}

inline void Erase_Menu_Text(const uint8_t line) {
  DWIN_Draw_Rectangle(1, Background_black, LBLX, 31+line*MLINE+4, 271, 28+(line+1)*MLINE-4);
}

inline void Draw_Menu_Line(const uint8_t line, const uint8_t icon=0, const char * const label=nullptr) {
  if (label) DWIN_Draw_String(false,false,font8x16,White,Background_black, LBLX, 48+line*MLINE, (char*)label);
  if (icon) Draw_Menu_Icon(line, icon);
  DWIN_Draw_Line(Line_Color, 16, 29+(line+1)*MLINE, 256, 30+(line+1)*MLINE);
}

// The "Back" label is always on the first line
inline void Draw_Back_Label(void) {
  if (HMI_flag.language_flag)
    DWIN_Frame_AreaCopy(1, 129, 72, 271-115, 479-395, LBLX, MBASE(0));
  else
    DWIN_Frame_AreaCopy(1, 226, 179, 271-15, 479-290, LBLX, MBASE(0));
}

// Draw "Back" line at the top
inline void Draw_Back_First(const bool is_sel=true) {
  Draw_Menu_Line(0, ICON_Back);
  Draw_Back_Label();
  if (is_sel) Draw_Menu_Cursor(0);
}

//
// Draw Menus
//

inline void draw_move_en(const uint16_t line) {
  DWIN_Frame_AreaCopy(1, 69, 61, 271-169, 479-408, LBLX, line); // "Move"
}

inline void Prepare_Item_Move(const uint8_t row) {
  if (HMI_flag.language_flag)
    DWIN_Frame_AreaCopy(1, 159, 70, 271-71, 479-395, LBLX, MBASE(row));
  else
    draw_move_en(MBASE(row)); // "Move >"
  Draw_Menu_Line(row, ICON_Axis);
  Draw_More_Icon(row);
}

inline void Prepare_Item_Disable(const uint8_t row) {
  if (HMI_flag.language_flag)
    DWIN_Frame_AreaCopy(1, 204, 70, 271-12, 479-397, LBLX, MBASE(row));
  else
    DWIN_Frame_AreaCopy(1, 103, 59, 271-71, 479-405, LBLX, MBASE(row)); // "Disable Stepper"
  Draw_Menu_Line(row, ICON_CloseMotor);
}

inline void Prepare_Item_Home(const uint8_t row) {
  if (HMI_flag.language_flag)
    DWIN_Frame_AreaCopy(1, 0, 89, 271-230, 479-378, LBLX, MBASE(row));
  else
    DWIN_Frame_AreaCopy(1, 202, 61, 271-0, 479-408, LBLX, MBASE(row));  // "Auto Home"
  Draw_Menu_Line(row, ICON_Homing);
}

inline void Prepare_Item_Offset(const uint8_t row) {
  if (HMI_flag.language_flag) {
    #if HAS_BED_PROBE
      DWIN_Frame_AreaCopy(1, 174, 164, 271-48, 479-302, LBLX, MBASE(row));
      show_plus_or_minus(font8x16, Background_black, 2, 2, 202, MBASE(row), probe.offset.z*100);
    #else
      DWIN_Frame_AreaCopy(1, 43, 89, 271-173, 479-378, LBLX, MBASE(row));
    #endif
  }
  else {
    #if HAS_BED_PROBE
      DWIN_Frame_AreaCopy(1, 93, 179, 271-130, 479-290, LBLX, MBASE(row)); // "Z-Offset"
      show_plus_or_minus(font8x16, Background_black, 2, 2, 202, MBASE(row), probe.offset.z*100);
    #else
      DWIN_Frame_AreaCopy(1, 1, 76, 271-165, 479-393, LBLX, MBASE(row)); // "..."
    #endif
  }
  Draw_Menu_Line(row, ICON_SetHome);
}

inline void Prepare_Item_PLA(const uint8_t row) {
  if (HMI_flag.language_flag)
    DWIN_Frame_AreaCopy(1, 100, 89, 271-93-27, 479-378, LBLX, MBASE(row));
  else {
    DWIN_Frame_AreaCopy(1, 107, 76, 271-115, 479-393, LBLX, MBASE(row)); // "Preheat"
    DWIN_Frame_AreaCopy(1, 157, 76, 181, 479-393, LBLX+49+3, MBASE(row)); // "PLA"
  }
  Draw_Menu_Line(row, ICON_PLAPreheat);
}

inline void Prepare_Item_ABS(const uint8_t row) {
  if (HMI_flag.language_flag)
    DWIN_Frame_AreaCopy(1, 180, 89, 271-11-27, 479-379, LBLX, MBASE(row));
  else {
    DWIN_Frame_AreaCopy(1, 107, 76, 271-115, 479-393, LBLX, MBASE(row)); // "Preheat"
    DWIN_Frame_AreaCopy(1, 172, 76, 198, 479-393, LBLX+49+3, MBASE(row)); // "ABS"
  }
  Draw_Menu_Line(row, ICON_ABSPreheat);
}

inline void Prepare_Item_Cool(const uint8_t row) {
  if (HMI_flag.language_flag)
    DWIN_Frame_AreaCopy(1, 1, 104, 271-215, 479-362, LBLX, MBASE(row));
  else
    DWIN_Frame_AreaCopy(1, 200,  76, 271-7, 479-393, LBLX, MBASE(row)); // "Cooldown"
  Draw_Menu_Line(row, ICON_Cool);
}

inline void Prepare_Item_Lang(const uint8_t row) {
  if (HMI_flag.language_flag) {
    DWIN_Frame_AreaCopy(1, 239, 134, 271-5, 479-333, LBLX, MBASE(row));
    DWIN_Draw_String(false,false,font8x16,White,Background_black, 226, MBASE(row), (char*)"CN");
  }
  else {
    DWIN_Frame_AreaCopy(1, 0, 194, 271-150, 479-272, LBLX, MBASE(row)); // "Language selection"
    DWIN_Draw_String(false,false,font8x16,White,Background_black, 226, MBASE(row), (char*)"EN");
  }
  Draw_Menu_Icon(row, ICON_Language);
}

inline void Draw_Prepare_Menu() {
  Clear_Main_Window();

  const int16_t scroll = MROWS-index_prepare; // Scrolled-up lines
  #define PSCROL(L) (scroll + (L))
  #define PVISI(L)  WITHIN(PSCROL(L), 0, MROWS)

  if (HMI_flag.language_flag)
    DWIN_Frame_AreaCopy(1, 133, 1, 271-111, 479-465-1, 14, 8); // "Prepare"
  else {
    #ifdef USE_STRING_HEADINGS
      Draw_Title("Prepare"); // TODO: GET_TEXT_F
    #else
      DWIN_Frame_AreaCopy(1, 178, 2, 271-42, 479-464-1, 14, 8); // "Prepare"
    #endif
  }

  if (PVISI(0)) Draw_Back_First(select_prepare.now == 0); // < Back
  if (PVISI(1)) Prepare_Item_Move(PSCROL(1));         // Move >
  if (PVISI(2)) Prepare_Item_Disable(PSCROL(2));      // Disable Stepper
  if (PVISI(3)) Prepare_Item_Home(PSCROL(3));         // Auto Home
  if (PVISI(4)) Prepare_Item_Offset(PSCROL(4));       // Z-Offset
  if (PVISI(5)) Prepare_Item_PLA(PSCROL(5));          // Preheat PLA
  if (PVISI(6)) Prepare_Item_ABS(PSCROL(6));          // Preheat ABS
  if (PVISI(7)) Prepare_Item_Cool(PSCROL(7));         // Cooldown
  if (PVISI(8)) Prepare_Item_Lang(PSCROL(8));         // Language CN/EN

  if (select_prepare.now) Draw_Menu_Cursor(PSCROL(select_prepare.now));
}

inline void Draw_Control_Menu() {
  Clear_Main_Window();

  const int16_t scroll = TERN(HAS_LEVELING, MROWS-index_control, 0); // Scrolled-up lines

  #define CSCROL(L) (scroll + (L))
  #define CLINE(L)  MBASE(CSCROL(L))
  #define CVISI(L)  WITHIN(CSCROL(L), 0, MROWS)

  if (CVISI(0)) Draw_Back_First(select_control.now == 0);                          // < Back

  if (HMI_flag.language_flag) {
    DWIN_Frame_AreaCopy(1, 103,   1, 271-141, 479-465, 14, 8);
    DWIN_Frame_AreaCopy(1,  57, 104, 271-187, 479-363, LBLX, CLINE(1));        // Temperature >
    DWIN_Frame_AreaCopy(1,  87, 104, 271-157, 479-363, LBLX, CLINE(2));        // Motion >
    DWIN_Frame_AreaCopy(1, 117, 104, 271- 99, 479-363, LBLX, CLINE(3));        // Store Config
    DWIN_Frame_AreaCopy(1, 174, 103, 271- 42, 479-363, LBLX, CLINE(4));        // Read Config
    DWIN_Frame_AreaCopy(1,   1, 118, 271-215, 479-348, LBLX, CLINE(5));        // Reset Config

    if (CVISI(6))
      DWIN_Frame_AreaCopy(1, 231, 104, 271- 13, 479-363, LBLX, CLINE(6));      // Info >
  }
  else {
    #ifdef USE_STRING_HEADINGS
      Draw_Title("Control"); // TODO: GET_TEXT_F
    #else
      DWIN_Frame_AreaCopy(1, 128, 2, 271-95, 479-467, 14, 8);
    #endif

    DWIN_Frame_AreaCopy(1,   1,    89, 271-188, 479-377-1, LBLX, CLINE(1));    // Temperature >
    DWIN_Frame_AreaCopy(1,  84,    89, 271-143, 479-380,   LBLX, CLINE(2));    // Motion >
    DWIN_Frame_AreaCopy(1, 131+17, 89, 271-  3, 479-377-1, LBLX, CLINE(3));    // "Store Configuration"

    DWIN_Frame_AreaCopy(1, 26, 104, 271-214, 479-365, LBLX, CLINE(4));         // "Read"
    DWIN_Frame_AreaCopy(1, 131+51, 89, 271-3, 479-377-1, LBLX+31+3, CLINE(4)); // "Configuration"

    DWIN_Frame_AreaCopy(1, 59, 104, 271-178, 479-365, LBLX, CLINE(5));         // "Reset"
    DWIN_Frame_AreaCopy(1, 131+51, 89, 271-3, 479-377-1, LBLX+34+3, CLINE(5)); // "Configuration"

    if (CVISI(6))
      DWIN_Frame_AreaCopy(1, 0, 104, 25, 115, LBLX, CLINE(6));                 // Info >
  }

  if (select_control.now && CVISI(select_control.now))
    Draw_Menu_Cursor(CSCROL(select_control.now));

  // Draw icons and lines
  LOOP_L_N(i, 6)
    if (CVISI(i + 1)) Draw_Menu_Line(CSCROL(i + 1), ICON_Temperature+i);

  Draw_More_Icon(CSCROL(1));
  Draw_More_Icon(CSCROL(2));
  if (CVISI(6)) Draw_More_Icon(CSCROL(6));
}

inline void Draw_Tune_Menu() {
  Clear_Main_Window();

  if (HMI_flag.language_flag) {
    DWIN_Frame_AreaCopy(1, 73, 2, 271-171, 479-466, 14, 9);

    DWIN_Frame_AreaCopy(1, 116, 164, 271-100, 479-303, LBLX, MBASE(1));
    DWIN_Frame_AreaCopy(1, 1, 134, 271-215, 479-333, LBLX, MBASE(2));
    DWIN_Frame_AreaCopy(1, 58, 134, 271-158, 479-333, LBLX, MBASE(3));
    DWIN_Frame_AreaCopy(1, 115, 134, 271-101, 479-333, LBLX, MBASE(4));
    DWIN_Frame_AreaCopy(1, 174, 164, 271-48, 479-302, LBLX, MBASE(5));
  }
  else {
    #ifdef USE_STRING_HEADINGS
      Draw_Title("Tune"); // TODO: GET_TEXT
    #else
      DWIN_Frame_AreaCopy(1, 94, 2, 271-145, 479-467, 14, 9);
    #endif
    DWIN_Frame_AreaCopy(1, 1, 179, 271-179, 479-287-2, LBLX, MBASE(1));     // print speed
    DWIN_Frame_AreaCopy(1, 197, 104, 271-33, 479-365, LBLX, MBASE(2));      // Hotend...
    DWIN_Frame_AreaCopy(1, 1, 89, 271-188, 479-377-1, LBLX+41+3, MBASE(2)); // ...Temperature
    DWIN_Frame_AreaCopy(1, 240, 104, 271-7, 479-365, LBLX, MBASE(3));       // Bed...
    DWIN_Frame_AreaCopy(1, 1, 89, 271-188, 479-377-1, LBLX+24+3, MBASE(3)); // ...Temperature
    DWIN_Frame_AreaCopy(1, 0, 119, 271-207, 479-347, LBLX, MBASE(4));       // fan speed
    DWIN_Frame_AreaCopy(1, 93, 179, 271-130, 479-290, LBLX, MBASE(5));      // Z-offset
  }

  Draw_Back_First(select_tune.now == 0);
  if (select_tune.now) Draw_Menu_Cursor(select_tune.now);

  Draw_Menu_Line(1, ICON_Speed);
  Draw_Menu_Line(2, ICON_HotendTemp);
  Draw_Menu_Line(3, ICON_BedTemp);
  Draw_Menu_Line(4, ICON_FanSpeed);
  Draw_Menu_Line(5, ICON_Zoffset);

  DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(1), feedrate_percentage);
  DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(2), thermalManager.temp_hotend[0].target);
  DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(3), thermalManager.temp_bed.target);
  DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(4), thermalManager.fan_speed[0]);
  show_plus_or_minus(font8x16, Background_black, 2, 2, 202, MBASE(5), BABY_Z_VAR*100);
}

inline void draw_max_en(const uint16_t line) {
  DWIN_Frame_AreaCopy(1, 245, 119, 271-2, 479-350, LBLX, line);         // "Max"
}
inline void draw_max_accel_en(const uint16_t line) {
  draw_max_en(line);
  DWIN_Frame_AreaCopy(1, 1, 135, 271-192, 479-334, LBLX+24+3, line);    // "Acceleration"
}
inline void draw_speed_en(const uint16_t inset, const uint16_t line) {
  DWIN_Frame_AreaCopy(1, 184, 119, 224, 479-347, LBLX+inset, line);     // "Speed"
}
inline void draw_corner_en(const uint16_t line) {
  DWIN_Frame_AreaCopy(1, 64, 119, 271-165, 479-350, LBLX+24+3, line);   // "Corner"
}
inline void draw_steps_per_mm(const uint16_t line) {
  DWIN_Frame_AreaCopy(1, 1, 151, 271-170, 479-318, LBLX, line);         // "Steps-per-mm"
}
inline void say_x(const uint16_t inset, const uint16_t line) {
  DWIN_Frame_AreaCopy(1, 95, 104, 271-169, 479-365, LBLX+inset, line);  // "X"
}
inline void say_y(const uint16_t inset, const uint16_t line) {
  DWIN_Frame_AreaCopy(1, 104, 104, 271-161, 479-365, LBLX+inset, line); // "Y"
}
inline void say_z(const uint16_t inset, const uint16_t line) {
  DWIN_Frame_AreaCopy(1, 112, 104, 271-151, 479-365, LBLX+inset, line); // "Z"
}
inline void say_e(const uint16_t inset, const uint16_t line) {
  DWIN_Frame_AreaCopy(1, 237, 119, 271-27, 479-350, LBLX+inset, line);  // "E"
}

inline void Draw_Motion_Menu() {
  Clear_Main_Window();

  if (HMI_flag.language_flag) {
    DWIN_Frame_AreaCopy(1, 1, 16, 271-243, 479-451, 14, 8);

    DWIN_Frame_AreaCopy(1, 173, 133, 228, 479-332, LBLX, MBASE(1));         // max speed
    DWIN_Frame_AreaCopy(1, 173, 133, 200, 479-332, LBLX, MBASE(2));         // max...
    DWIN_Frame_AreaCopy(1, 28, 149, 271-202, 479-318, LBLX+27, MBASE(2)+1); // ...acceleration
    DWIN_Frame_AreaCopy(1, 173, 133, 200, 479-332, LBLX, MBASE(3));         // max...
    DWIN_Frame_AreaCopy(1, 1, 180, 271-243, 479-287, LBLX+27, MBASE(3)+1);  // ...
    DWIN_Frame_AreaCopy(1, 202, 133, 228, 479-332, LBLX+54, MBASE(3));      // ...jerk
    DWIN_Frame_AreaCopy(1, 153, 148, 271-77, 479-318, LBLX, MBASE(4));      // flow ratio
  }
  else {
    #ifdef USE_STRING_HEADINGS
      Draw_Title("Motion"); // TODO: GET_TEXT_F
    #else
      DWIN_Frame_AreaCopy(1, 144, 16, 271-82, 479-453, 14, 8);
    #endif
    draw_max_en(MBASE(1)); draw_speed_en(24+3, MBASE(1));                   // "Max Speed"
    draw_max_accel_en(MBASE(2));                                            // "Max Acceleration"
    draw_max_en(MBASE(3)); draw_corner_en(MBASE(3));                        // "Max Corner"
    draw_steps_per_mm(MBASE(4));                                            // "Steps-per-mm"
  }

  Draw_Back_First(select_motion.now == 0);
  if (select_motion.now) Draw_Menu_Cursor(select_motion.now);

  LOOP_L_N(i, 4) Draw_Menu_Line(i + 1, ICON_MaxSpeed+i);

  Draw_More_Icon(1);
  Draw_More_Icon(2);
  Draw_More_Icon(3);
  Draw_More_Icon(4);
}

//
// Draw Popup Windows
//

void Popup_Window_Temperature(const bool toohigh) {
  Clear_Popup_Area();
  Draw_Popup_Bkgd_105();
  if (toohigh) {
    DWIN_ICON_Show(ICON, ICON_TempTooHigh, 102, 165);
    if (HMI_flag.language_flag) {
      DWIN_Frame_AreaCopy(1, 103, 371, 237, 479-93, 52, 285);
      DWIN_Frame_AreaCopy(1, 151, 389, 185, 402, 187, 285);
      DWIN_Frame_AreaCopy(1, 189, 389, 271-0, 402, 95, 310);
    }
    else {
      DWIN_Draw_String(false,true,font8x16, Font_window, Background_window, 36, 300, (char*)"Nozzle or Bed temperature");
      DWIN_Draw_String(false,true,font8x16, Font_window, Background_window, 92, 300, (char*)"is too high");
    }
  }
  else {
    DWIN_ICON_Show(ICON, ICON_TempTooLow, 102, 165);
    if (HMI_flag.language_flag) {
      DWIN_Frame_AreaCopy(1, 103, 371, 271-1, 479-93, 52, 285);
      DWIN_Frame_AreaCopy(1, 189, 389, 271-0, 402, 95, 310);
    }
    else {
      DWIN_Draw_String(false,true,font8x16, Font_window, Background_window, 36, 300, (char*)"Nozzle or Bed temperature");
      DWIN_Draw_String(false,true,font8x16, Font_window, Background_window, 92, 300, (char*)"is too low");
    }
  }
}

inline void Draw_Popup_Bkgd_60() {
  DWIN_Draw_Rectangle(1, Background_window, 14, 60, 271-13, 330);
}

void Popup_Window_ETempTooLow(void) {
  Clear_Main_Window();
  Draw_Popup_Bkgd_60();
  DWIN_ICON_Show(ICON, ICON_TempTooLow, 102, 105);
  if (HMI_flag.language_flag) {
    DWIN_Frame_AreaCopy(1, 103, 371, 136, 479-93, 69, 240);
    DWIN_Frame_AreaCopy(1, 170, 371, 271-1, 479-93, 69+33, 240);
    DWIN_ICON_Show(ICON, ICON_Confirm_C, 86, 280);
  }
  else {
    DWIN_Draw_String(false,true,font8x16, Font_window, Background_window, 20, 235, (char*)"Nozzle is too cold");
    DWIN_ICON_Show(ICON, ICON_Confirm_E, 86, 280);
  }
}

void Popup_Window_Resume(void) {
  Clear_Popup_Area();
  Draw_Popup_Bkgd_105();
  if (HMI_flag.language_flag) {
    DWIN_Frame_AreaCopy(1, 160, 338, 271-36, 479-125, 98, 135);
    DWIN_Frame_AreaCopy(1, 103, 321, 271-0, 479-144, 52, 192);
    DWIN_ICON_Show(ICON, ICON_Continue_C, 26, 307);
    DWIN_ICON_Show(ICON, ICON_Cancel_C, 146, 307);
  }
  else {
    DWIN_Draw_String(false,true,font8x16, Font_window, Background_window, 120, 115, (char*)"Tips");
    DWIN_Draw_String(false,true,font8x16, Font_window, Background_window, 24, 192, (char*)"I see the file stopped");
    DWIN_Draw_String(false,true,font8x16, Font_window, Background_window, 68, 212, (char*)"unexpectedly last time");
    DWIN_ICON_Show(ICON, ICON_Continue_E, 26, 307);
    DWIN_ICON_Show(ICON, ICON_Cancel_E, 146, 307);
  }
}

void Popup_Window_Home(void) {
  Clear_Main_Window();
  Draw_Popup_Bkgd_60();
  DWIN_ICON_Show(ICON, ICON_BLTouch, 101, 105);
  if (HMI_flag.language_flag) {
    DWIN_Frame_AreaCopy(1, 0, 371, 33, 386, 85, 240);
    DWIN_Frame_AreaCopy(1, 203, 286, 271, 302, 118, 240);
    DWIN_Frame_AreaCopy(1, 0, 389, 150, 402, 61, 280);
  }
  else {
    DWIN_Draw_String(false,true,font8x16, Font_window, Background_window, 80, 230, (char*)"Auto homing...");
    DWIN_Draw_String(false,true,font8x16, Font_window, Background_window, 24, 260, (char*)"Please wait until completed");
  }
}

void Popup_Window_Leveling(void) {
  Clear_Main_Window();
  Draw_Popup_Bkgd_60();
  DWIN_ICON_Show(ICON, ICON_AutoLeveling, 101, 105);
  if (HMI_flag.language_flag) {
    DWIN_Frame_AreaCopy(1, 0, 371, 100, 386, 84, 240);
    DWIN_Frame_AreaCopy(1, 0, 389, 150, 402, 61, 280);
  }
  else {
    DWIN_Draw_String(false,true,font8x16, Font_window, Background_window, 76, 230, (char*)"Auto leveling...");
    DWIN_Draw_String(false,true,font8x16, Font_window, Background_window, 24, 260, (char*)"Please wait until completed");
  }
}

void Draw_Select_Highlight(const bool sel) {
  HMI_flag.select_flag = sel;
  const uint16_t c1 = sel ? Select_Color : Background_window,
                 c2 = sel ? Background_window : Select_Color;
  DWIN_Draw_Rectangle(0, c1, 25, 279, 126, 318);
  DWIN_Draw_Rectangle(0, c1, 24, 278, 127, 319);
  DWIN_Draw_Rectangle(0, c2, 145, 279, 246, 318);
  DWIN_Draw_Rectangle(0, c2, 144, 278, 247, 319);
}

void Popup_window_PauseOrStop(void) {
  Clear_Main_Window();
  Draw_Popup_Bkgd_60();
  if (HMI_flag.language_flag) {
    if (select_print.now == 1) DWIN_Frame_AreaCopy(1, 237, 338, 269, 356, 98, 150);
    else if (select_print.now == 2) DWIN_Frame_AreaCopy(1, 221, 320, 253, 336, 98, 150);
    DWIN_Frame_AreaCopy(1, 220, 304, 264, 319, 130, 150);
    DWIN_ICON_Show(ICON, ICON_Confirm_C, 26, 280);
    DWIN_ICON_Show(ICON, ICON_Cancel_C, 146, 280);
  }
  else {
    if (select_print.now == 1) DWIN_Draw_String(false,true,font8x16, Font_window, Background_window, 88, 150, (char*)"Pause print?");
    else if (select_print.now == 2) DWIN_Draw_String(false,true,font8x16, Font_window, Background_window, 92, 150, (char*)"Stop print?");
    DWIN_ICON_Show(ICON, ICON_Confirm_E, 26, 280);
    DWIN_ICON_Show(ICON, ICON_Cancel_E, 146, 280);
  }
  Draw_Select_Highlight(true);
}

void Draw_Printing_Screen(void) {
  if (HMI_flag.language_flag) {
    DWIN_Frame_AreaCopy(1, 30,  1, 271-200, 479-465,  14,   9); // Tune
    DWIN_Frame_AreaCopy(1,  0, 72, 271-208, 479-393,  41, 188); // Pause
    DWIN_Frame_AreaCopy(1, 65, 72, 271-143, 479-393, 176, 188); // Stop
  }
  else {
    DWIN_Frame_AreaCopy(1, 40,  2, 271-179, 479-464-1,  14,   9); // Tune
    DWIN_Frame_AreaCopy(1,  0, 44, 271-175, 479-420-1,  41, 188); // Pause
    DWIN_Frame_AreaCopy(1, 98, 44, 271-119, 479-420-1, 176, 188); // Stop
  }
}

void Draw_Print_ProgressBar() {
  DWIN_ICON_Show(ICON,ICON_Bar, 15, 93);
  DWIN_Draw_Rectangle(1, BarFill_Color, 16+Percentrecord*240/100, 93, 256, 113);
  DWIN_Draw_IntValue(true,true,0,font8x16,Percent_Color,Background_black, 2, 117, 133, Percentrecord);
  DWIN_Draw_String(false,false,font8x16,Percent_Color,Background_black, 117+16, 133, (char*)"%");
}

void Draw_Print_ProgressElapsed() {
  duration_t elapsed = print_job_timer.duration();  // print timer
  DWIN_Draw_IntValue(true,true,1,font8x16,White,Background_black, 2, 42, 212, elapsed.value/3600);
  DWIN_Draw_String(false,false,font8x16,White,Background_black, 42+16, 212, (char*)":");
  DWIN_Draw_IntValue(true,true,1,font8x16,White,Background_black, 2, 42+24, 212, (elapsed.value%3600)/60);
}

void Draw_Print_ProgressRemain() {
  DWIN_Draw_IntValue(true,true,1,font8x16,White,Background_black, 2, 176, 212, remain_time/3600);
  DWIN_Draw_String(false,false,font8x16,White,Background_black, 176+16, 212, (char*)":");
  DWIN_Draw_IntValue(true,true,1,font8x16,White,Background_black, 2, 176+24, 212, (remain_time%3600)/60);
}

void Goto_PrintProcess(void) {
  checkkey = PrintProcess;

  Clear_Main_Window();
  Draw_Printing_Screen();

  ICON_Tune();
  if (printingIsPaused()) ICON_Continue(); else ICON_Pause();
  ICON_Stop();

  // Copy into filebuf string before entry
  char * const name = card.longest_filename();
  DWIN_Draw_String(false,false,font8x16,White,Background_black, (DWIN_WIDTH-strlen(name)*MENU_CHR_W)/2, 60, name);

  DWIN_ICON_Show(ICON,ICON_PrintTime, 17, 193);
  DWIN_ICON_Show(ICON,ICON_RemainTime, 150, 191);

  Draw_Print_ProgressBar();
  Draw_Print_ProgressElapsed();
  Draw_Print_ProgressRemain();
}

void Goto_MainMenu(void) {
  checkkey = MainMenu;

  Clear_Main_Window();

  if (HMI_flag.language_flag)
    DWIN_Frame_AreaCopy(1, 2, 2, 271-244, 479-465, 14, 9); // "Home"
  else {
    #ifdef USE_STRING_HEADINGS
      Draw_Title("Home"); // TODO: GET_TEXT
    #else
      DWIN_Frame_AreaCopy(1, 0, 2, 271-232, 479-467, 14, 9);
    #endif
  }

  DWIN_ICON_Show(ICON, ICON_LOGO, 71, 52);

  ICON_Print();
  ICON_Prepare();
  ICON_Control();
  TERN(HAS_LEVELING, ICON_Leveling, ICON_StartInfo)(select_page.now == 3);
}

inline ENCODER_DiffState get_encoder_state() {
  const millis_t ms = millis();
  if (PENDING(ms, Encoder_ms)) return ENCODER_DIFF_NO;
  const ENCODER_DiffState state = Encoder_ReceiveAnalyze();
  if (state != ENCODER_DIFF_NO) Encoder_ms = ms + Encoder_wait;
  return state;
}

void HMI_Move_X(void) {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState != ENCODER_DIFF_NO) {
    if (encoder_diffState == ENCODER_DIFF_CW)
      HMI_ValueStruct.Move_X_scale += EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_CCW)
      HMI_ValueStruct.Move_X_scale -= EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_ENTER) {
      checkkey = AxisMove;
      EncoderRate.encoderRateEnabled = 0;
      DWIN_Draw_FloatValue(true,true,0,font8x16,White,Background_black, 3, 1, 216, MBASE(1), HMI_ValueStruct.Move_X_scale);
      if (!planner.is_full()) {
        // Wait for planner moves to finish!
        planner.synchronize();
        planner.buffer_line(current_position, MMM_TO_MMS(HOMING_FEEDRATE_XY), active_extruder);
      }
      DWIN_UpdateLCD();
      return;
    }
    if (HMI_ValueStruct.Move_X_scale < X_MIN_POS*MinUnitMult) HMI_ValueStruct.Move_X_scale = X_MIN_POS*MinUnitMult;
    else if (HMI_ValueStruct.Move_X_scale > X_MAX_POS*MinUnitMult) HMI_ValueStruct.Move_X_scale = X_MAX_POS*MinUnitMult;
    current_position[X_AXIS] = HMI_ValueStruct.Move_X_scale/10;
    DWIN_Draw_FloatValue(true,true,0,font8x16,White,Select_Color, 3, 1, 216, MBASE(1), HMI_ValueStruct.Move_X_scale);
    DWIN_UpdateLCD();
  }
}

void HMI_Move_Y(void) {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState != ENCODER_DIFF_NO) {
    if (encoder_diffState == ENCODER_DIFF_CW)
      HMI_ValueStruct.Move_Y_scale += EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_CCW)
      HMI_ValueStruct.Move_Y_scale -= EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_ENTER) {
      checkkey = AxisMove;
      EncoderRate.encoderRateEnabled = 0;
      DWIN_Draw_FloatValue(true,true,0,font8x16,White,Background_black, 3, 1, 216, MBASE(2), HMI_ValueStruct.Move_Y_scale);
      if (!planner.is_full()) {
        // Wait for planner moves to finish!
        planner.synchronize();
        planner.buffer_line(current_position, MMM_TO_MMS(HOMING_FEEDRATE_XY), active_extruder);
      }
      DWIN_UpdateLCD();
      return;
    }
    if (HMI_ValueStruct.Move_Y_scale < Y_MIN_POS*MinUnitMult) HMI_ValueStruct.Move_Y_scale = Y_MIN_POS*MinUnitMult;
    else if (HMI_ValueStruct.Move_Y_scale > Y_MAX_POS*MinUnitMult) HMI_ValueStruct.Move_Y_scale = Y_MAX_POS*MinUnitMult;
    current_position[Y_AXIS] = HMI_ValueStruct.Move_Y_scale/10;
    DWIN_Draw_FloatValue(true,true,0,font8x16,White,Select_Color, 3, 1, 216, MBASE(2), HMI_ValueStruct.Move_Y_scale);
    DWIN_UpdateLCD();
  }
}

void HMI_Move_Z(void) {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState != ENCODER_DIFF_NO) {
    if (encoder_diffState == ENCODER_DIFF_CW)
      HMI_ValueStruct.Move_Z_scale += EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_CCW)
      HMI_ValueStruct.Move_Z_scale -= EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_ENTER) {
      checkkey = AxisMove;
      EncoderRate.encoderRateEnabled = 0;
      DWIN_Draw_FloatValue(true,true,0,font8x16,White,Background_black, 3, 1, 216, MBASE(3), HMI_ValueStruct.Move_Z_scale);
      if (!planner.is_full()) {
        // Wait for planner moves to finish!
        planner.synchronize();
        planner.buffer_line(current_position, MMM_TO_MMS(HOMING_FEEDRATE_Z), active_extruder);
      }
      DWIN_UpdateLCD();
      return;
    }
    if (HMI_ValueStruct.Move_Z_scale < Z_MIN_POS*MinUnitMult)
      HMI_ValueStruct.Move_Z_scale = Z_MIN_POS*MinUnitMult;
    else if (HMI_ValueStruct.Move_Z_scale > Z_MAX_POS*MinUnitMult)
      HMI_ValueStruct.Move_Z_scale = Z_MAX_POS*MinUnitMult;
    current_position[Z_AXIS] = HMI_ValueStruct.Move_Z_scale/10;
    DWIN_Draw_FloatValue(true,true,0,font8x16,White,Select_Color, 3, 1, 216, MBASE(3), HMI_ValueStruct.Move_Z_scale);
    DWIN_UpdateLCD();
  }
}

void HMI_Move_E(void) {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState != ENCODER_DIFF_NO) {
    if (encoder_diffState == ENCODER_DIFF_CW)
      HMI_ValueStruct.Move_E_scale += EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_CCW)
      HMI_ValueStruct.Move_E_scale -= EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_ENTER) {
      checkkey = AxisMove;
      EncoderRate.encoderRateEnabled = 0;
      last_E_scale = HMI_ValueStruct.Move_E_scale;
      show_plus_or_minus(font8x16, Background_black, 3, 1, 216, MBASE(4), HMI_ValueStruct.Move_E_scale);
      if (!planner.is_full()) {
        planner.synchronize(); // Wait for planner moves to finish!
        planner.buffer_line(current_position, MMM_TO_MMS(FEEDRATE_E), active_extruder);
      }
      DWIN_UpdateLCD();
      return;
    }
    if ((HMI_ValueStruct.Move_E_scale-last_E_scale) > EXTRUDE_MAXLENGTH*MinUnitMult)
      HMI_ValueStruct.Move_E_scale = last_E_scale + EXTRUDE_MAXLENGTH*MinUnitMult;
    else if ((last_E_scale-HMI_ValueStruct.Move_E_scale) > EXTRUDE_MAXLENGTH*MinUnitMult)
      HMI_ValueStruct.Move_E_scale = last_E_scale - EXTRUDE_MAXLENGTH*MinUnitMult;
    current_position.e = HMI_ValueStruct.Move_E_scale/10;
    show_plus_or_minus(font8x16, Select_Color, 3, 1, 216, MBASE(4), HMI_ValueStruct.Move_E_scale);
    DWIN_UpdateLCD();
  }
}

void HMI_Zoffset(void) {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState != ENCODER_DIFF_NO) {
    last_zoffset = zprobe_zoffset;
    if (encoder_diffState == ENCODER_DIFF_CW)
      HMI_ValueStruct.offset_value += EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_CCW)
      HMI_ValueStruct.offset_value -= EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_ENTER) {
      EncoderRate.encoderRateEnabled = 0;
      zprobe_zoffset = HMI_ValueStruct.offset_value / 100;
      #if HAS_BED_PROBE
        if (WITHIN(zprobe_zoffset - last_zoffset, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX))
          probe.offset.z = zprobe_zoffset;
        settings.save();
      #elif ENABLED(BABYSTEPPING)
        babystep.add_mm(Z_AXIS, (zprobe_zoffset - last_zoffset));
      #else
        UNUSED(zprobe_zoffset - last_zoffset);
      #endif

      if (HMI_ValueStruct.show_mode == -4) {
        checkkey = Prepare;
        show_plus_or_minus(font8x16, Background_black, 2, 2, 202, MBASE(4+MROWS-index_prepare), TERN(HAS_LEVELING, probe.offset.z*100, HMI_ValueStruct.offset_value));
      }
      else {
        checkkey = Tune;
        show_plus_or_minus(font8x16, Background_black, 2, 2, 202, MBASE(5+MROWS-index_tune), TERN(HAS_LEVELING, probe.offset.z*100, HMI_ValueStruct.offset_value));
      }
      DWIN_UpdateLCD();
      return;
    }
    NOLESS(HMI_ValueStruct.offset_value, (Z_PROBE_OFFSET_RANGE_MIN)*100);
    NOMORE(HMI_ValueStruct.offset_value, (Z_PROBE_OFFSET_RANGE_MAX)*100);
    if (HMI_ValueStruct.show_mode == -4)
      show_plus_or_minus(font8x16, Select_Color, 2, 2, 202, MBASE(4+MROWS-index_prepare), HMI_ValueStruct.offset_value);
    else
      show_plus_or_minus(font8x16, Select_Color, 2, 2, 202, MBASE(5+MROWS-index_tune), HMI_ValueStruct.offset_value);
    DWIN_UpdateLCD();
  }
}

void HMI_ETemp(void) {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState != ENCODER_DIFF_NO) {
    if (encoder_diffState == ENCODER_DIFF_CW)
      HMI_ValueStruct.E_Temp += EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_CCW)
      HMI_ValueStruct.E_Temp -= EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_ENTER) { // return
      EncoderRate.encoderRateEnabled = 0;
      if (HMI_ValueStruct.show_mode == -1) { // temperature
        checkkey = TemperatureID;
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(1), HMI_ValueStruct.E_Temp);
      }
      else if (HMI_ValueStruct.show_mode == -2) {
        checkkey = PLAPreheat;
        HMI_ValueStruct.preheat_hotend_temp[0] = HMI_ValueStruct.E_Temp;
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(1), HMI_ValueStruct.preheat_hotend_temp[0]);
        return;
      }
      else if (HMI_ValueStruct.show_mode == -3) {
        checkkey = ABSPreheat;
        HMI_ValueStruct.preheat_hotend_temp[1] = HMI_ValueStruct.E_Temp;
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(1), HMI_ValueStruct.preheat_hotend_temp[1]);
        return;
      }
      else { // tune
        checkkey = Tune;
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(2+MROWS-index_tune), HMI_ValueStruct.E_Temp);
      }
      thermalManager.setTargetHotend(HMI_ValueStruct.E_Temp, 0);
      return;
    }
    // E_Temp limit
    NOMORE(HMI_ValueStruct.E_Temp, max_E_Temp);
    NOLESS(HMI_ValueStruct.E_Temp, min_E_Temp);
    // E_Temp value
    if (HMI_ValueStruct.show_mode >= 0)  // tune
      DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(2+MROWS-index_tune), HMI_ValueStruct.E_Temp);
    else  // other page
      DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(1), HMI_ValueStruct.E_Temp);
  }
}

void HMI_BedTemp(void) {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState != ENCODER_DIFF_NO) {
    if (encoder_diffState == ENCODER_DIFF_CW)
      HMI_ValueStruct.Bed_Temp += EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_CCW)
      HMI_ValueStruct.Bed_Temp -= EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_ENTER) { // return
      EncoderRate.encoderRateEnabled = 0;
      if (HMI_ValueStruct.show_mode == -1) {
        checkkey = TemperatureID;
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(2), HMI_ValueStruct.Bed_Temp);
      }
      else if (HMI_ValueStruct.show_mode == -2) {
        checkkey = PLAPreheat;
        HMI_ValueStruct.preheat_bed_temp[0] = HMI_ValueStruct.Bed_Temp;
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(2), HMI_ValueStruct.preheat_bed_temp[0]);
        return;
      }
      else if (HMI_ValueStruct.show_mode == -3) {
        checkkey = ABSPreheat;
        HMI_ValueStruct.preheat_bed_temp[1] = HMI_ValueStruct.Bed_Temp;
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(2), HMI_ValueStruct.preheat_bed_temp[1]);
        return;
      }
      else {
        checkkey = Tune;
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(3+MROWS-index_tune), HMI_ValueStruct.Bed_Temp);
      }
      thermalManager.setTargetBed(HMI_ValueStruct.Bed_Temp);
      return;
    }
    //Bed_Temp limit
    NOMORE(HMI_ValueStruct.Bed_Temp, max_Bed_Temp);
    NOLESS(HMI_ValueStruct.Bed_Temp, min_Bed_Temp);
    //Bed_Temp value
    if (HMI_ValueStruct.show_mode >= 0) // tune page
      DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(3+MROWS-index_tune), HMI_ValueStruct.Bed_Temp);
    else // other page
      DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(2), HMI_ValueStruct.Bed_Temp);
  }
}

void HMI_FanSpeed(void) {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState != ENCODER_DIFF_NO) {
    if (encoder_diffState == ENCODER_DIFF_CW)
      HMI_ValueStruct.Fan_speed += EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_CCW)
      HMI_ValueStruct.Fan_speed -= EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_ENTER) { // return
      EncoderRate.encoderRateEnabled = 0;
      if (HMI_ValueStruct.show_mode == -1) {
        checkkey = TemperatureID;
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(3), HMI_ValueStruct.Fan_speed);
      }
      else if (HMI_ValueStruct.show_mode == -2) {
        checkkey = PLAPreheat;
        HMI_ValueStruct.preheat_fan_speed[0] = HMI_ValueStruct.Fan_speed;
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(3), HMI_ValueStruct.preheat_fan_speed[0]);
        return;
      }
      else if (HMI_ValueStruct.show_mode == -3) {
        checkkey = ABSPreheat;
        HMI_ValueStruct.preheat_fan_speed[1] = HMI_ValueStruct.Fan_speed;
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(3), HMI_ValueStruct.preheat_fan_speed[1]);
        return;
      }
      else {
        checkkey = Tune;
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(4+MROWS-index_tune), HMI_ValueStruct.Fan_speed);
      }
      thermalManager.set_fan_speed(0, HMI_ValueStruct.Fan_speed);
      return;
    }
    //Fan_speed limit
    NOMORE(HMI_ValueStruct.Fan_speed, FanOn);
    NOLESS(HMI_ValueStruct.Fan_speed, FanOff);
    // Fan_speed value
    if (HMI_ValueStruct.show_mode >= 0) // tune page
      DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(4+MROWS-index_tune), HMI_ValueStruct.Fan_speed);
    else // other page
      DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(3), HMI_ValueStruct.Fan_speed);
  }
}

void HMI_PrintSpeed(void) {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState != ENCODER_DIFF_NO) {
    if (encoder_diffState == ENCODER_DIFF_CW)
      HMI_ValueStruct.print_speed += EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_CCW)
      HMI_ValueStruct.print_speed -= EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_ENTER) { // return
      checkkey = Tune;
      EncoderRate.encoderRateEnabled = 0;
      feedrate_percentage = HMI_ValueStruct.print_speed;
      DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(1+MROWS-index_tune), HMI_ValueStruct.print_speed);
      return;
    }
    // print_speed limit
    NOMORE(HMI_ValueStruct.print_speed, max_print_speed);
    NOLESS(HMI_ValueStruct.print_speed, min_print_speed);
    // print_speed value
    DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(1+MROWS-index_tune), HMI_ValueStruct.print_speed);
  }
}

void HMI_MaxFeedspeedXYZE(void) {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState != ENCODER_DIFF_NO) {
    if (encoder_diffState == ENCODER_DIFF_CW)
      HMI_ValueStruct.Max_Feedspeed += EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_CCW)
      HMI_ValueStruct.Max_Feedspeed -= EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_ENTER) { // return
      checkkey = MaxSpeed;
      EncoderRate.encoderRateEnabled = 0;
           if (HMI_flag.feedspeed_flag == X_AXIS) planner.set_max_feedrate(X_AXIS, HMI_ValueStruct.Max_Feedspeed);
      else if (HMI_flag.feedspeed_flag == Y_AXIS) planner.set_max_feedrate(Y_AXIS, HMI_ValueStruct.Max_Feedspeed);
      else if (HMI_flag.feedspeed_flag == Z_AXIS) planner.set_max_feedrate(Z_AXIS, HMI_ValueStruct.Max_Feedspeed);
      else if (HMI_flag.feedspeed_flag == E_AXIS) planner.set_max_feedrate(E_AXIS, HMI_ValueStruct.Max_Feedspeed);
      DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 4, 210, MBASE(select_speed.now), HMI_ValueStruct.Max_Feedspeed);
      return;
    }
    //MaxFeedspeed limit
         if (HMI_flag.feedspeed_flag == X_AXIS) {if (HMI_ValueStruct.Max_Feedspeed > default_max_feedrate[X_AXIS]*2) HMI_ValueStruct.Max_Feedspeed = default_max_feedrate[X_AXIS]*2;}
    else if (HMI_flag.feedspeed_flag == Y_AXIS) {if (HMI_ValueStruct.Max_Feedspeed > default_max_feedrate[Y_AXIS]*2) HMI_ValueStruct.Max_Feedspeed = default_max_feedrate[Y_AXIS]*2;}
    else if (HMI_flag.feedspeed_flag == Z_AXIS) {if (HMI_ValueStruct.Max_Feedspeed > default_max_feedrate[Z_AXIS]*2) HMI_ValueStruct.Max_Feedspeed = default_max_feedrate[Z_AXIS]*2;}
    else if (HMI_flag.feedspeed_flag == E_AXIS) {if (HMI_ValueStruct.Max_Feedspeed > default_max_feedrate[E_AXIS]*2) HMI_ValueStruct.Max_Feedspeed = default_max_feedrate[E_AXIS]*2;}
    if (HMI_ValueStruct.Max_Feedspeed < min_MaxFeedspeed) HMI_ValueStruct.Max_Feedspeed = min_MaxFeedspeed;
    //MaxFeedspeed value
    DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 4, 210, MBASE(select_speed.now), HMI_ValueStruct.Max_Feedspeed);
  }
}

void HMI_MaxAccelerationXYZE(void) {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState != ENCODER_DIFF_NO) {
    if (encoder_diffState == ENCODER_DIFF_CW) HMI_ValueStruct.Max_Acceleration += EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_CCW) HMI_ValueStruct.Max_Acceleration -= EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_ENTER) { // return
      checkkey = MaxAcceleration;
      EncoderRate.encoderRateEnabled = 0;
           if (HMI_flag.acc_flag == X_AXIS) planner.set_max_acceleration(X_AXIS, HMI_ValueStruct.Max_Acceleration);
      else if (HMI_flag.acc_flag == Y_AXIS) planner.set_max_acceleration(Y_AXIS, HMI_ValueStruct.Max_Acceleration);
      else if (HMI_flag.acc_flag == Z_AXIS) planner.set_max_acceleration(Z_AXIS, HMI_ValueStruct.Max_Acceleration);
      else if (HMI_flag.acc_flag == E_AXIS) planner.set_max_acceleration(E_AXIS, HMI_ValueStruct.Max_Acceleration);
      DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 4, 210, MBASE(select_acc.now), HMI_ValueStruct.Max_Acceleration);
      return;
    }
    // MaxAcceleration limit
         if (HMI_flag.acc_flag == X_AXIS) {if (HMI_ValueStruct.Max_Acceleration > default_max_acceleration[X_AXIS]*2) HMI_ValueStruct.Max_Acceleration = default_max_acceleration[X_AXIS]*2;}
    else if (HMI_flag.acc_flag == Y_AXIS) {if (HMI_ValueStruct.Max_Acceleration > default_max_acceleration[Y_AXIS]*2) HMI_ValueStruct.Max_Acceleration = default_max_acceleration[Y_AXIS]*2;}
    else if (HMI_flag.acc_flag == Z_AXIS) {if (HMI_ValueStruct.Max_Acceleration > default_max_acceleration[Z_AXIS]*2) HMI_ValueStruct.Max_Acceleration = default_max_acceleration[Z_AXIS]*2;}
    else if (HMI_flag.acc_flag == E_AXIS) {if (HMI_ValueStruct.Max_Acceleration > default_max_acceleration[E_AXIS]*2) HMI_ValueStruct.Max_Acceleration = default_max_acceleration[E_AXIS]*2;}
    if (HMI_ValueStruct.Max_Acceleration < min_MaxAcceleration) HMI_ValueStruct.Max_Acceleration = min_MaxAcceleration;
    // MaxAcceleration value
    DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 4, 210, MBASE(select_acc.now), HMI_ValueStruct.Max_Acceleration);
  }
}

void HMI_MaxCornerXYZE(void) {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState != ENCODER_DIFF_NO) {
    if (encoder_diffState == ENCODER_DIFF_CW)
      HMI_ValueStruct.Max_Corner += EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_CCW)
      HMI_ValueStruct.Max_Corner -= EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_ENTER) { // return
      checkkey = MaxCorner;
      EncoderRate.encoderRateEnabled = 0;
           if (HMI_flag.corner_flag == X_AXIS) planner.set_max_jerk(X_AXIS, HMI_ValueStruct.Max_Corner/10);
      else if (HMI_flag.corner_flag == Y_AXIS) planner.set_max_jerk(Y_AXIS, HMI_ValueStruct.Max_Corner/10);
      else if (HMI_flag.corner_flag == Z_AXIS) planner.set_max_jerk(Z_AXIS, HMI_ValueStruct.Max_Corner/10);
      else if (HMI_flag.corner_flag == E_AXIS) planner.set_max_jerk(E_AXIS, HMI_ValueStruct.Max_Corner/10);
      DWIN_Draw_FloatValue(true,true,0,font8x16,White,Background_black, 3, 1, 210, MBASE(select_corner.now), HMI_ValueStruct.Max_Corner);
      return;
    }
    //MaxCorner limit
         if (HMI_flag.corner_flag == X_AXIS) {if (HMI_ValueStruct.Max_Corner > default_max_jerk[X_AXIS]*2*MinUnitMult) HMI_ValueStruct.Max_Corner = default_max_jerk[X_AXIS]*2*MinUnitMult;}
    else if (HMI_flag.corner_flag == Y_AXIS) {if (HMI_ValueStruct.Max_Corner > default_max_jerk[Y_AXIS]*2*MinUnitMult) HMI_ValueStruct.Max_Corner = default_max_jerk[Y_AXIS]*2*MinUnitMult;}
    else if (HMI_flag.corner_flag == Z_AXIS) {if (HMI_ValueStruct.Max_Corner > default_max_jerk[Z_AXIS]*2*MinUnitMult) HMI_ValueStruct.Max_Corner = default_max_jerk[Z_AXIS]*2*MinUnitMult;}
    else if (HMI_flag.corner_flag == E_AXIS) {if (HMI_ValueStruct.Max_Corner > default_max_jerk[E_AXIS]*2*MinUnitMult) HMI_ValueStruct.Max_Corner = default_max_jerk[E_AXIS]*2*MinUnitMult;}
    if (HMI_ValueStruct.Max_Corner < min_MaxCorner*MinUnitMult) HMI_ValueStruct.Max_Corner = min_MaxCorner*MinUnitMult;
    //MaxCorner value
    DWIN_Draw_FloatValue(true,true,0,font8x16,White,Select_Color, 3, 1, 210, MBASE(select_corner.now), HMI_ValueStruct.Max_Corner);
  }
}

void HMI_StepXYZE(void) {
  ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
  if (encoder_diffState != ENCODER_DIFF_NO) {
    if (encoder_diffState == ENCODER_DIFF_CW)
      HMI_ValueStruct.Max_Step += EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_CCW)
      HMI_ValueStruct.Max_Step -= EncoderRate.encoderMoveValue;
    else if (encoder_diffState == ENCODER_DIFF_ENTER) { // return
      checkkey = Step;
      EncoderRate.encoderRateEnabled = 0;
           if (HMI_flag.step_flag == X_AXIS) planner.settings.axis_steps_per_mm[X_AXIS] = HMI_ValueStruct.Max_Step/10;
      else if (HMI_flag.step_flag == Y_AXIS) planner.settings.axis_steps_per_mm[Y_AXIS] = HMI_ValueStruct.Max_Step/10;
      else if (HMI_flag.step_flag == Z_AXIS) planner.settings.axis_steps_per_mm[Z_AXIS] = HMI_ValueStruct.Max_Step/10;
      else if (HMI_flag.step_flag == E_AXIS) planner.settings.axis_steps_per_mm[E_AXIS] = HMI_ValueStruct.Max_Step/10;
      DWIN_Draw_FloatValue(true,true,0,font8x16,White,Background_black, 3, 1, 210, MBASE(select_step.now), HMI_ValueStruct.Max_Step);
      return;
    }
    //Step limit
         if (HMI_flag.step_flag == X_AXIS) {if (HMI_ValueStruct.Max_Step > default_axis_steps_per_unit[X_AXIS]*2*MinUnitMult) HMI_ValueStruct.Max_Step = default_axis_steps_per_unit[X_AXIS]*2*MinUnitMult;}
    else if (HMI_flag.step_flag == Y_AXIS) {if (HMI_ValueStruct.Max_Step > default_axis_steps_per_unit[Y_AXIS]*2*MinUnitMult) HMI_ValueStruct.Max_Step = default_axis_steps_per_unit[Y_AXIS]*2*MinUnitMult;}
    else if (HMI_flag.step_flag == Z_AXIS) {if (HMI_ValueStruct.Max_Step > default_axis_steps_per_unit[Z_AXIS]*2*MinUnitMult) HMI_ValueStruct.Max_Step = default_axis_steps_per_unit[Z_AXIS]*2*MinUnitMult;}
    else if (HMI_flag.step_flag == E_AXIS) {if (HMI_ValueStruct.Max_Step > default_axis_steps_per_unit[E_AXIS]*2*MinUnitMult) HMI_ValueStruct.Max_Step = default_axis_steps_per_unit[E_AXIS]*2*MinUnitMult;}
    if (HMI_ValueStruct.Max_Step < min_Step) HMI_ValueStruct.Max_Step = min_Step;
    //Step value
    DWIN_Draw_FloatValue(true,true,0,font8x16,White,Select_Color, 3, 1, 210, MBASE(select_step.now), HMI_ValueStruct.Max_Step);
  }
}

void update_variable(void) {
  /* Tune page temperature update */
  if (checkkey == Tune) {
    if (last_temp_hotend_target != thermalManager.temp_hotend[0].target) {
      DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(2+MROWS-index_tune), thermalManager.temp_hotend[0].target);
    }
    if (last_temp_bed_target != thermalManager.temp_bed.target) {
      DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(3+MROWS-index_tune), thermalManager.temp_bed.target);
    }
    if (last_fan_speed != thermalManager.fan_speed[0]) {
      DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(4+MROWS-index_tune), thermalManager.fan_speed[0]);
      last_fan_speed = thermalManager.fan_speed[0];
    }
  }

  /* Temperature page temperature update */
  if (checkkey == TemperatureID) {
    if (last_temp_hotend_target != thermalManager.temp_hotend[0].target) {
      DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(1), thermalManager.temp_hotend[0].target);
    }
    if (last_temp_bed_target != thermalManager.temp_bed.target) {
      DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(2), thermalManager.temp_bed.target);
    }
    if (last_fan_speed != thermalManager.fan_speed[0]) {
      DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(3), thermalManager.fan_speed[0]);
      last_fan_speed = thermalManager.fan_speed[0];
    }
  }

  /* Bottom temperature update */
  if (last_temp_hotend_current != thermalManager.temp_hotend[0].celsius) {
    DWIN_Draw_IntValue(true,true,0,STAT_FONT,White,Background_black, 3, 33, 382, thermalManager.temp_hotend[0].celsius);
    last_temp_hotend_current = thermalManager.temp_hotend[0].celsius;
  }
  if (last_temp_hotend_target != thermalManager.temp_hotend[0].target) {
    DWIN_Draw_IntValue(true,true,0,STAT_FONT,White,Background_black, 3, 33+4*STAT_CHR_W+6, 382, thermalManager.temp_hotend[0].target);
    last_temp_hotend_target = thermalManager.temp_hotend[0].target;
  }
  if (last_temp_bed_current != thermalManager.temp_bed.celsius) {
    DWIN_Draw_IntValue(true,true,0,STAT_FONT,White,Background_black, 3, 178, 382, thermalManager.temp_bed.celsius);
    last_temp_bed_current = thermalManager.temp_bed.celsius;
  }
  if (last_temp_bed_target != thermalManager.temp_bed.target) {
    DWIN_Draw_IntValue(true,true,0,STAT_FONT,White,Background_black, 3, 178+4*STAT_CHR_W+6, 382, thermalManager.temp_bed.target);
    last_temp_bed_target = thermalManager.temp_bed.target;
  }
  if (last_speed != feedrate_percentage) {
    DWIN_Draw_IntValue(true,true,0,STAT_FONT,White,Background_black, 3, 33+2*STAT_CHR_W, 429, feedrate_percentage);
    last_speed = feedrate_percentage;
  }
  #if HAS_LEVELING
    if (last_probe_zoffset != probe.offset.z) {
      show_plus_or_minus(STAT_FONT, Background_black, 2, 2, 178+STAT_CHR_W, 429, probe.offset.z*100);
      last_probe_zoffset = probe.offset.z;
    }
  #else
    if (last_zoffset != zprobe_zoffset) {
      show_plus_or_minus(STAT_FONT, Background_black, 2, 2, 178+STAT_CHR_W, 429, zprobe_zoffset*100);
      last_zoffset = zprobe_zoffset;
    }
  #endif
}

/**
 * Read and cache the working directory.
 *
 * TODO: New code can follow the pattern of menu_media.cpp
 * and rely on Marlin caching for performance. No need to
 * cache files here.
 *
 */

#ifndef strcasecmp_P
#define strcasecmp_P(a, b) strcasecmp((a), (b))
#endif

inline void make_name_without_ext(char *dst, char *src, int maxlen=MENU_CHAR_LIMIT) {
  char * const name = card.longest_filename();
  size_t pos = strlen(name); // index of ending nul

  // For files, remove the extension
  // which may be .gcode, .gco, or .g
  if (!card.flag.filenameIsDir)
    while (pos && src[pos] != '.') pos--; // find last '.' (stop at 0)

  int len = pos;        // nul or '.'
  if (len > maxlen) {   // Keep the name short
    pos = len = maxlen; // move nul down
    dst[--pos] = '.';   // insert dots
    dst[--pos] = '.';
    dst[--pos] = '.';
  }

  dst[len] = '\0';      // end it

  // Copy down to 0
  while (pos--) dst[pos] = src[pos];
}

inline void HMI_SDCardInit(void) { card.cdroot(); }

void MarlinUI::refresh() {
  // The card was mounted or unmounted
  // or some other status change occurred
  //DWIN_lcd_sd_status = false; // On next DWIN_Update
  //HMI_SDCardUpdate();
}

#define ICON_Folder ICON_More

char shift_name[LONG_FILENAME_LENGTH + 1];
int8_t shift_amt;  // = 0
millis_t shift_ms; // = 0

// Init the shift name based on the highlighted item
inline void Init_Shift_Name() {
  const bool is_subdir = !card.flag.workDirIsRoot;
  const int8_t filenum = select_file.now - 1 - is_subdir; // Skip "Back" and ".."
  if (WITHIN(filenum, 0, card.get_num_Files() - 1)) {
    card.getfilename_sorted(filenum);
    char * const name = card.longest_filename();
    make_name_without_ext(shift_name, name, 100);
  }
}

inline void Init_SDItem_Shift() {
  shift_amt = 0;
  shift_ms = select_file.now > 0 && strlen(shift_name) > MENU_CHAR_LIMIT
           ? millis() + 750UL : 0;
}

/**
 * Display an SD item, adding a CDUP for subfolders.
 */
inline void Draw_SDItem(const uint16_t item, int16_t row=-1) {
  if (row < 0) row = item + 1 + MROWS-index_file;
  const bool is_subdir = !card.flag.workDirIsRoot;
  if (is_subdir && item == 0) {
    Draw_Menu_Line(row, ICON_Folder, (char*)"..");
    return;
  }

  card.getfilename_sorted(item - is_subdir);
  char * const name = card.longest_filename();

  // Init the current selected name
  // This is used during scroll drawing
  if (item == select_file.now - 1) {
    make_name_without_ext(shift_name, name, 100);
    Init_SDItem_Shift();
  }

  char str[strlen(name) + 1];

  make_name_without_ext(str, name);

  Draw_Menu_Line(row, card.flag.filenameIsDir ? ICON_Folder : ICON_File, str);
}

inline void Draw_SDItem_Shifted(int8_t &shift) {
  // Limit to the number of chars past the cutoff
  const size_t len = strlen(shift_name);
  NOMORE(shift, _MAX((signed)len - MENU_CHAR_LIMIT, 0));

  // Shorten to the available space
  const size_t lastchar = _MIN((signed)len, shift + MENU_CHAR_LIMIT);

  const char c = shift_name[lastchar];
  shift_name[lastchar] = '\0';

  const uint8_t row = select_file.now + MROWS-index_file; // skip "Back" and scroll
  Erase_Menu_Text(row);
  Draw_Menu_Line(row, 0, &shift_name[shift]);

  shift_name[lastchar] = c;
}

// Redraw the first set of SD Files
inline void Redraw_SD_List() {
  select_file.reset();
  index_file = MROWS;

  Clear_Menu_Area(); // Leave title bar unchanged

  Draw_Back_First();

  // As many files as will fit
  LOOP_L_N(i, _MIN(nr_sd_menu_items(), MROWS))
    Draw_SDItem(i, i + 1);

  Init_SDItem_Shift();
}

inline void SDCard_Up(void) {
  card.cdup();
  Redraw_SD_List();
  DWIN_lcd_sd_status = false; // On next DWIN_Update
}

inline void SDCard_Folder(char * const dirname) {
  card.cd(dirname);
  Redraw_SD_List();
  DWIN_lcd_sd_status = false; // On next DWIN_Update
}

//
// Watch for media mount / unmount
//
void HMI_SDCardUpdate(void) {
  if (HMI_flag.home_flag) return;
  if (DWIN_lcd_sd_status != card.isMounted()) {
    DWIN_lcd_sd_status = card.isMounted();
    //SERIAL_ECHOLNPAIR("HMI_SDCardUpdate: ", int(DWIN_lcd_sd_status));
    if (card.isMounted()) {
      if (checkkey == SelectFile)
        Redraw_SD_List();
    }
    else {
      // clean file icon
      if (checkkey == SelectFile)
        Redraw_SD_List();
      else if (checkkey == PrintProcess || checkkey == Tune || printingIsActive()) {
        // TODO: Move card removed abort handling
        //       to CardReader::manage_media.
        card.flag.abort_sd_printing = true;
        wait_for_heatup = false;
        abort_flag = true;
      }
    }
    DWIN_UpdateLCD();
  }
}

/* Start */
void HMI_StartFrame(const bool with_update) {
  Goto_MainMenu();

  DWIN_Draw_Rectangle(1, Background_black,  0,  360,  272, 479);

  DWIN_ICON_Show(ICON,ICON_HotendTemp, 13, 381);
  #if HOTENDS > 1
    //DWIN_ICON_Show(ICON,ICON_HotendTemp, 13, 381);
  #endif
  DWIN_ICON_Show(ICON,ICON_BedTemp,   158, 381);
  DWIN_ICON_Show(ICON,ICON_Speed,      13, 429);
  DWIN_ICON_Show(ICON,ICON_Zoffset,   158, 428);

  // Draw initial Status Area
  DWIN_Draw_IntValue(true,true,0,STAT_FONT,White,Background_black, 3, 33, 382, thermalManager.temp_hotend[0].celsius);
  DWIN_Draw_IntValue(true,true,0,STAT_FONT,White,Background_black, 3, 33+4*STAT_CHR_W+6, 382, thermalManager.temp_hotend[0].target);
  DWIN_Draw_IntValue(true,true,0,STAT_FONT,White,Background_black, 3, 178, 382, thermalManager.temp_bed.celsius);
  DWIN_Draw_IntValue(true,true,0,STAT_FONT,White,Background_black, 3, 178+4*STAT_CHR_W+6, 382, thermalManager.temp_bed.target);

  DWIN_Draw_IntValue(true,true,0,STAT_FONT,White,Background_black, 3, 33+2*STAT_CHR_W, 429, feedrate_percentage);
  DWIN_Draw_String(false,false,STAT_FONT,White,Background_black, 33+(2+3)*STAT_CHR_W+2, 429, (char*)"%");

  show_plus_or_minus(STAT_FONT, Background_black, 2, 2, 178, 429, BABY_Z_VAR * 100);
  DWIN_Draw_String(false,false,STAT_FONT,White,Background_black, 33+3*STAT_CHR_W+5, 383, (char*)"/");
  DWIN_Draw_String(false,false,STAT_FONT,White,Background_black, 178+3*STAT_CHR_W+5, 383, (char*)"/");

  if (with_update) {
    DWIN_UpdateLCD();
    delay(5);
  }
}

inline void Draw_Info_Menu() {
  Clear_Main_Window();

  DWIN_Draw_String(false,false,font8x16,White,Background_black, (DWIN_WIDTH-strlen(MACHINE_SIZE)*MENU_CHR_W)/2, 122, (char*)MACHINE_SIZE);
  DWIN_Draw_String(false,false,font8x16,White,Background_black, (DWIN_WIDTH-strlen(SHORT_BUILD_VERSION)*MENU_CHR_W)/2, 195, (char*)SHORT_BUILD_VERSION);

  if (HMI_flag.language_flag) {
    DWIN_Frame_AreaCopy(1, 30, 17, 271-214, 479-450, 14, 8);

    DWIN_Frame_AreaCopy(1, 197, 149, 271-19, 479-318, 108, 102);
    DWIN_Frame_AreaCopy(1, 1, 164, 271-215, 479-303, 108, 175);
    DWIN_Frame_AreaCopy(1, 58, 164, 271-158, 479-303, 105, 248);
    DWIN_Draw_String(false,false,font8x16,White,Background_black, (DWIN_WIDTH-strlen(CORP_WEBSITE_C)*MENU_CHR_W)/2, 268, (char*)CORP_WEBSITE_C);
  }
  else {
    #ifdef USE_STRING_HEADINGS
      Draw_Title("Info"); // TODO: GET_TEXT_F
    #else
      DWIN_Frame_AreaCopy(1, 190, 16, 271-56, 479-453, 14, 8);
    #endif

    DWIN_Frame_AreaCopy(1, 120, 150, 146, 479-318, 124, 102);
    DWIN_Frame_AreaCopy(1, 146, 151, 271-17, 479-318, 82, 175);
    DWIN_Frame_AreaCopy(1, 0, 165, 271-177, 479-304, 89, 248);
    DWIN_Draw_String(false,false,font8x16,White,Background_black, (DWIN_WIDTH-strlen(CORP_WEBSITE_E)*MENU_CHR_W)/2, 268, (char*)CORP_WEBSITE_E);
  }

  Draw_Back_First();
  LOOP_L_N(i, 3) {
    DWIN_ICON_Show(ICON,ICON_PrintSize+i, 26, 99+i*73);
    DWIN_Draw_Line(Line_Color, 16, MBASE(2)+i*73, 256, 156+i*73);
  }
}

inline void Draw_Print_File_Menu() {
  Clear_Title_Bar();

  if (HMI_flag.language_flag)
    DWIN_Frame_AreaCopy(1, 0, 31, 271-216, 479-435, 14, 8);
  else {
    #ifdef USE_STRING_HEADINGS
      Draw_Title("Print file"); // TODO: GET_TEXT_F
    #else
      DWIN_Frame_AreaCopy(1, 52, 31, 271-134, 479-438, 14, 8); // "Print file"
    #endif
  }

  Redraw_SD_List();
}

/* Main Process */
void HMI_MainMenu(void) {
  ENCODER_DiffState encoder_diffState = get_encoder_state();
  if (encoder_diffState == ENCODER_DIFF_NO) return;

  if (encoder_diffState == ENCODER_DIFF_CW) {
    if (select_page.inc(3)) {
      switch (select_page.now) {
        case 0: ICON_Print(); break;
        case 1: ICON_Print(); ICON_Prepare(); break;
        case 2: ICON_Prepare(); ICON_Control(); break;
        case 3: ICON_Control(); TERN(HAS_LEVELING, ICON_Leveling, ICON_StartInfo)(1); break;
      }
    }
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW) {
    if (select_page.dec()) {
      switch (select_page.now) {
        case 0: ICON_Print(); ICON_Prepare(); break;
        case 1: ICON_Prepare(); ICON_Control(); break;
        case 2: ICON_Control(); TERN(HAS_LEVELING, ICON_Leveling, ICON_StartInfo)(0); break;
        case 3: TERN(HAS_LEVELING, ICON_Leveling, ICON_StartInfo)(1); break;
      }
    }
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    switch (select_page.now) {
      /* Print File */
      case 0:
        checkkey = SelectFile;
        Draw_Print_File_Menu();
        break;

      /* Prepare */
      case 1:
        checkkey = Prepare;
        select_prepare.reset();
        index_prepare = MROWS;
        Draw_Prepare_Menu();
        break;

      /* Control */
      case 2:
        checkkey = Control;
        select_control.reset();
        index_control = MROWS;
        Draw_Control_Menu();
        break;

      /* Leveling */
      case 3:
        #if HAS_LEVELING
          checkkey = Leveling;
          HMI_Leveling();
        #else
          checkkey = Info;
          Draw_Info_Menu();
        #endif
        break;
    }
  }
  DWIN_UpdateLCD();
}

/* Select (and Print) File */
void HMI_SelectFile(void) {
  ENCODER_DiffState encoder_diffState = get_encoder_state();

  const uint16_t hasUpDir = !card.flag.workDirIsRoot;

  if (encoder_diffState == ENCODER_DIFF_NO) {
    if (shift_ms && select_file.now >= 1 + hasUpDir) {
      // Scroll selected filename every second
      const millis_t ms = millis();
      if (ELAPSED(ms, shift_ms)) {
        const bool was_reset = shift_amt < 0;
        shift_ms = ms + 375UL + was_reset * 250UL;  // ms per character
        int8_t shift_new = shift_amt + 1;           // Try to shift by...
        Draw_SDItem_Shifted(shift_new);             // Draw the item
        if (!was_reset && shift_new == 0)           // Was it limited to 0?
          shift_ms = 0;                             // No scrolling needed
        else if (shift_new == shift_amt)            // Scroll reached the end
          shift_new = -1;                           // Reset
        shift_amt = shift_new;                      // Set new scroll
      }
    }
    return;
  }

  // First pause is long. Easy.
  // On reset, long pause must be after 0.

  const uint16_t fullCnt = nr_sd_menu_items();

  if (encoder_diffState == ENCODER_DIFF_CW && fullCnt) {
    if (select_file.inc(fullCnt)) {
      const uint8_t itemnum = select_file.now - 1;                // -1 for "Back"
      if (shift_ms) {                                             // If line was shifted
        Erase_Menu_Text(select_file.now - 1 + MROWS-index_file);  // Erase and
        Draw_SDItem(itemnum - 1);                                 // redraw
      }
      if (select_file.now > MROWS && select_file.now > index_file) {  // Cursor past the bottom
        index_file = select_file.now;                             // New bottom line
        Scroll_Menu(DWIN_SCROLL_UP);
        Draw_SDItem(itemnum, MROWS);                              // Draw and init the shift name
      }
      else {
        Move_Highlight(1, select_file.now+MROWS-index_file);      // Just move highlight
        Init_Shift_Name();                                        // ...and init the shift name
      }
      Init_SDItem_Shift();
    }
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW && fullCnt) {
    if (select_file.dec()) {
      const uint8_t itemnum = select_file.now - 1;                // -1 for "Back"
      if (shift_ms) {                                             // If line was shifted
        Erase_Menu_Text(select_file.now + 1 + MROWS-index_file);  // Erase and
        Draw_SDItem(itemnum + 1);                                 // redraw
      }
      if (select_file.now < index_file - MROWS) {                 // Cursor past the top
        index_file--;                                             // New bottom line
        Scroll_Menu(DWIN_SCROLL_DOWN);
        if (index_file == MROWS) {
          Draw_Back_First();
          shift_ms = 0;
        }
        else
          Draw_SDItem(itemnum, 0);                                // Draw the item (and init shift name)
      }
      else {
        Move_Highlight(-1, select_file.now+MROWS-index_file);     // Just move highlight
        Init_Shift_Name();                                        // ...and init the shift name
      }
      Init_SDItem_Shift();                                        // Reset left. Init timer.
    }
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    if (select_file.now == 0) {
      /* back */
      select_page.set(0);
      Goto_MainMenu();
    }
    else if (hasUpDir && select_file.now == 1) {
      /* CDUP */
      SDCard_Up();
      goto HMI_SelectFileExit;
    }
    else {
      const uint16_t filenum = select_file.now - 1 - hasUpDir;
      card.getfilename_sorted(filenum);

      // Enter that folder!
      if (card.flag.filenameIsDir) {
        SDCard_Folder(card.filename);
        goto HMI_SelectFileExit;
      }

      // Reset highlight for next entry
      select_print.reset();
      select_file.reset();

      // Start choice and print SD file
      HMI_flag.heat_flag = 1;
      HMI_flag.print_finish = 0;
      HMI_ValueStruct.show_mode = 0;

      card.openAndPrintFile(card.filename);

      #if FAN_COUNT > 0
        // All fans on for Ender 3 v2 ?
        // The slicer should manage this for us.
        //for (uint8_t i = 0; i < FAN_COUNT; i++)
        //  thermalManager.fan_speed[i] = FanOn;
      #endif

      Goto_PrintProcess();
    }
  }
  HMI_SelectFileExit:
    DWIN_UpdateLCD();
}

/* Printing */
void HMI_Printing(void) {
  ENCODER_DiffState encoder_diffState = get_encoder_state();
  if (encoder_diffState == ENCODER_DIFF_NO) return;

  if (HMI_flag.confirm_flag) {
    if (encoder_diffState == ENCODER_DIFF_ENTER) {
      HMI_flag.confirm_flag = 0;
      abort_flag = 1;
    }
    return;
  }

  // Avoid flicker by updating only the previous menu
  if (encoder_diffState == ENCODER_DIFF_CW) {
    if (select_print.inc(2)) {
      switch (select_print.now) {
        case 0: ICON_Tune(); break;
        case 1:
          ICON_Tune();
          if (printingIsPaused()) ICON_Continue(); else ICON_Pause();
          break;
        case 2:
          if (printingIsPaused()) ICON_Continue(); else ICON_Pause();
          ICON_Stop();
          break;
      }
    }
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW) {
    if (select_print.dec()) {
      switch (select_print.now) {
        case 0:
          ICON_Tune();
          if (printingIsPaused()) ICON_Continue(); else ICON_Pause();
          break;
        case 1:
          if (printingIsPaused()) ICON_Continue(); else ICON_Pause();
          ICON_Stop();
          break;
        case 2: ICON_Stop(); break;
      }
    }
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    switch (select_print.now) {
      case 0: // setting
        checkkey = Tune;
        HMI_ValueStruct.show_mode = 0;
        select_tune.reset();
        index_tune = 5;
        Draw_Tune_Menu();
        break;
      case 1: // pause
        /* pause */
        if (HMI_flag.pause_flag) {
          ICON_Pause();

          char cmd[40];
          cmd[0] = '\0';

          #if ENABLED(PAUSE_HEAT)
            if (tempbed) sprintf_P(cmd, PSTR("M190 S%i\n"), tempbed);
            if (temphot) sprintf_P(&cmd[strlen(cmd)], PSTR("M109 S%i\n"), temphot);
          #endif

          strcat_P(cmd, PSTR("M24"));
          queue.inject(cmd);
        }
        else {
          HMI_flag.select_flag = 1;
          checkkey = Print_window;
          Popup_window_PauseOrStop();
        }
        break;

      case 2: // stop
        /* stop */
        HMI_flag.select_flag = 1;
        checkkey = Print_window;
        Popup_window_PauseOrStop();
        break;

      default:
        break;
    }
  }
  DWIN_UpdateLCD();
}

/* pause and stop window */
void HMI_PauseOrStop(void) {
  ENCODER_DiffState encoder_diffState = get_encoder_state();
  if (encoder_diffState == ENCODER_DIFF_NO) return;

  if (encoder_diffState == ENCODER_DIFF_CW)
    Draw_Select_Highlight(false);
  else if (encoder_diffState == ENCODER_DIFF_CCW)
    Draw_Select_Highlight(true);
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    if (select_print.now == 1) { // pause window
      if (HMI_flag.select_flag) {
        pause_action_flag = 1;
        ICON_Continue();
        #if ENABLED(POWER_LOSS_RECOVERY)
          if (recovery.enabled) recovery.save(true);
        #endif
        queue.inject_P(PSTR("M25"));
      }
      else {
        // cancel pause
      }
      Goto_PrintProcess();
    }
    else if (select_print.now == 2) { // stop window
      if (HMI_flag.select_flag) {
        wait_for_heatup = false;  // Stop waiting for heater

        #if 0
          // TODO: In ExtUI or MarlinUI add a common stop event
          //card.flag.abort_sd_printing = true;
        #else
          checkkey = Back_Main;
          // Wait for planner moves to finish!
          if (HMI_flag.home_flag) planner.synchronize();
          card.endFilePrint();
          #ifdef ACTION_ON_CANCEL
            host_action_cancel();
          #endif
          #ifdef EVENT_GCODE_SD_STOP
            Popup_Window_Home();
            queue.inject_P(PSTR(EVENT_GCODE_SD_STOP)); // For Ender 3 "G28 X Y"
          #endif
          abort_flag = true;
        #endif
      }
      else
        Goto_PrintProcess();  // cancel stop
    }
  }
  DWIN_UpdateLCD();
}

inline void Draw_Move_Menu() {
  Clear_Main_Window();

  if (HMI_flag.language_flag) {
    DWIN_Frame_AreaCopy(1, 192, 1, 271-38, 479-465, 14, 8);

    DWIN_Frame_AreaCopy(1, 58, 118, 271-165, 479-347, LBLX, MBASE(1));
    DWIN_Frame_AreaCopy(1, 109, 118, 271-114, 479-347, LBLX, MBASE(2));
    DWIN_Frame_AreaCopy(1, 160, 118, 271-62, 479-347, LBLX, MBASE(3));
    DWIN_Frame_AreaCopy(1, 212, 118, 271-18, 479-348, LBLX, MBASE(4));
  }
  else {
    #ifdef USE_STRING_HEADINGS
      Draw_Title("Move"); // TODO: GET_TEXT_F
    #else
      DWIN_Frame_AreaCopy(1, 231, 2, 271-6, 479-467, 14, 8);
    #endif
    draw_move_en(MBASE(1)); say_x(33+3, MBASE(1));                        // "Move X"
    draw_move_en(MBASE(2)); say_y(33+3, MBASE(2));                        // "Move Y"
    draw_move_en(MBASE(3)); say_z(33+3, MBASE(3));                        // "Move Z"
    DWIN_Frame_AreaCopy(1, 123, 192, 271-95, 479-277, LBLX, MBASE(4));    // "Extruder"
  }

  Draw_Back_First(select_axis.now == 0);
  if (select_axis.now) Draw_Menu_Cursor(select_axis.now);

  LOOP_L_N(i, MROWS) Draw_Menu_Line(i + 1, ICON_MoveX+i);
}

/* Prepare */
void HMI_Prepare(void) {
  ENCODER_DiffState encoder_diffState = get_encoder_state();
  if (encoder_diffState == ENCODER_DIFF_NO) return;

  // Avoid flicker by updating only the previous menu
  if (encoder_diffState == ENCODER_DIFF_CW) {
    if (select_prepare.inc(8)) {
      if (select_prepare.now > MROWS && select_prepare.now > index_prepare) {
        index_prepare = select_prepare.now;

        // Scroll up and draw a blank bottom line
        Scroll_Menu(DWIN_SCROLL_UP);
        Draw_Menu_Icon(MROWS, ICON_Axis+select_prepare.now-1);

        // Draw "More" icon for sub-menus
        if (index_prepare < 7) Draw_More_Icon(MROWS-index_prepare+1);

             if (index_prepare == 6) Prepare_Item_ABS(MROWS);
        else if (index_prepare == 7) Prepare_Item_Cool(MROWS);
        else if (index_prepare == 8) Prepare_Item_Lang(MROWS);
      }
      else
        Move_Highlight(1, select_prepare.now+MROWS-index_prepare);
    }
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW) {
    if (select_prepare.dec()) {
      if (select_prepare.now < index_prepare-MROWS) {
        index_prepare--;
        Scroll_Menu(DWIN_SCROLL_DOWN);

        if (index_prepare == MROWS)
          Draw_Back_First();
        else
          Draw_Menu_Line(0, ICON_Axis+select_prepare.now-1);

        if (index_prepare < 7) Draw_More_Icon(MROWS-index_prepare+1);

             if (index_prepare == 6) Prepare_Item_Move(0);
        else if (index_prepare == 7) Prepare_Item_Disable(0);
        else if (index_prepare == 8) Prepare_Item_Home(0);
      }
      else
        Move_Highlight(-1, select_prepare.now+MROWS-index_prepare);
    }
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    switch (select_prepare.now) {
      case 0: // back
        select_page.set(1);
        Goto_MainMenu();
        break;
      case 1: // axis move
        checkkey = AxisMove;
        select_axis.reset();
        Draw_Move_Menu();

        queue.inject_P(PSTR("G92 E0"));
        current_position.e = HMI_ValueStruct.Move_E_scale = 0;
        DWIN_Draw_FloatValue(true,true,0,font8x16,White,Background_black, 3, 1, 216, MBASE(1), current_position[X_AXIS]*MinUnitMult);
        DWIN_Draw_FloatValue(true,true,0,font8x16,White,Background_black, 3, 1, 216, MBASE(2), current_position[Y_AXIS]*MinUnitMult);
        DWIN_Draw_FloatValue(true,true,0,font8x16,White,Background_black, 3, 1, 216, MBASE(3), current_position[Z_AXIS]*MinUnitMult);
        show_plus_or_minus(font8x16, Background_black, 3, 1, 216, MBASE(4), current_position.e*MinUnitMult);
        break;
      case 2: // close motion
        queue.inject_P(PSTR("M84"));
        break;
      case 3: // homing
        checkkey = Last_Prepare;
        index_prepare = MROWS;
        queue.inject_P(PSTR("G28")); // G28 will set home_flag
        Popup_Window_Home();
        break;
      case 4: // Z-offset
        #if HAS_LEVELING
          checkkey = Homeoffset;
          HMI_ValueStruct.show_mode = -4;
          HMI_ValueStruct.offset_value = probe.offset.z * 100;
          show_plus_or_minus(font8x16, Select_Color, 2, 2, 202, MBASE(4+MROWS-index_prepare), HMI_ValueStruct.offset_value);
          EncoderRate.encoderRateEnabled = 1;
        #else
          // Apply workspace offset, making the current position 0,0,0
          queue.inject_P(PSTR("G92 X0 Y0 Z0"));
          buzzer.tone(100, 659);
          buzzer.tone(100, 698);
        #endif
        break;
      case 5: // PLA preheat
        thermalManager.setTargetHotend(HMI_ValueStruct.preheat_hotend_temp[0], 0);
        thermalManager.setTargetBed(HMI_ValueStruct.preheat_bed_temp[0]);
        thermalManager.set_fan_speed(0, HMI_ValueStruct.preheat_fan_speed[0]);
        break;
      case 6: // ABS preheat
        thermalManager.setTargetHotend(HMI_ValueStruct.preheat_hotend_temp[1], 0);
        thermalManager.setTargetBed(HMI_ValueStruct.preheat_bed_temp[1]);
        thermalManager.set_fan_speed(0, HMI_ValueStruct.preheat_fan_speed[1]);
        break;
      case 7: // cool
        thermalManager.zero_fan_speeds();
        thermalManager.disable_all_heaters();
        break;
      case 8: // language
        /* select language */
        HMI_flag.language_flag = !HMI_flag.language_flag;
        if (HMI_flag.language_flag) {
          set_chinese_to_eeprom();
          DWIN_JPG_CacheTo1(Language_Chinese);
        }
        else {
          set_english_to_eeprom();
          DWIN_JPG_CacheTo1(Language_English);
        }
        Draw_Prepare_Menu();
        break;
      default:
        break;
    }
  }
  DWIN_UpdateLCD();
}

void Draw_Temperature_Menu() {
  Clear_Main_Window();

  if (HMI_flag.language_flag) {
    DWIN_Frame_AreaCopy(1, 236, 2, 271-8, 479-466, 14, 8);

    DWIN_Frame_AreaCopy(1, 1, 134, 271-215, 479-333, LBLX, MBASE(1));
    DWIN_Frame_AreaCopy(1, 58, 134, 271-158, 479-333, LBLX, MBASE(2));
    DWIN_Frame_AreaCopy(1, 115, 134, 271-101, 479-333, LBLX, MBASE(3));
    DWIN_Frame_AreaCopy(1, 100, 89, 271-93, 479-378, LBLX, MBASE(4));
    DWIN_Frame_AreaCopy(1, 180, 89, 271-11, 479-379, LBLX, MBASE(5));
  }
  else {
    #ifdef USE_STRING_HEADINGS
      Draw_Title("Temperature"); // TODO: GET_TEXT_F
    #else
      DWIN_Frame_AreaCopy(1, 56, 16, 271-130, 479-450-1, 14, 8);
    #endif

    DWIN_Frame_AreaCopy(1, 197, 104, 271-33, 479-365, LBLX, MBASE(1));          // Nozzle...
    DWIN_Frame_AreaCopy(1, 1, 89, 271-188, 479-377-1, LBLX+41+3, MBASE(1));     // ...Temperature
    DWIN_Frame_AreaCopy(1, 240, 104, 271-7, 479-365, LBLX, MBASE(2));           // Bed...
    DWIN_Frame_AreaCopy(1, 1, 89, 271-188, 479-377-1, LBLX+24+3, MBASE(2));     // ...Temperature
    DWIN_Frame_AreaCopy(1, 0, 119, 271-207, 479-347, LBLX, MBASE(3));           // Fan speed
    DWIN_Frame_AreaCopy(1, 107, 76, 271-115, 479-393, LBLX, MBASE(4));          // Preheat...
    DWIN_Frame_AreaCopy(1, 157, 76, 181, 479-393, LBLX+49+3, MBASE(4));         // ...PLA
    DWIN_Frame_AreaCopy(1, 131, 119, 271-89, 479-347, LBLX+49+24+6, MBASE(4));  // PLA setting
    DWIN_Frame_AreaCopy(1, 107, 76, 271-115, 479-393, LBLX, MBASE(5));          // Preheat...
    DWIN_Frame_AreaCopy(1, 172, 76, 198, 479-393, LBLX+49+3, MBASE(5));         // ...ABS
    DWIN_Frame_AreaCopy(1, 131, 119, 271-89, 479-347, LBLX+49+3+26+3, MBASE(5));  // ABS setting
  }

  Draw_Back_First(select_temp.now == 0);
  if (select_temp.now) Draw_Menu_Cursor(select_temp.now);

  LOOP_L_N(i, 5) Draw_Menu_Line(i + 1, ICON_SetEndTemp+i);

  Draw_More_Icon(4);
  Draw_More_Icon(5);

  DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(1), thermalManager.temp_hotend[0].target);
  DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(2), thermalManager.temp_bed.target);
  DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(3), thermalManager.fan_speed[0]);
}

/* Control */
void HMI_Control(void) {
  ENCODER_DiffState encoder_diffState = get_encoder_state();
  if (encoder_diffState == ENCODER_DIFF_NO) return;

  // Avoid flicker by updating only the previous menu
  if (encoder_diffState == ENCODER_DIFF_CW) {
    #define CONTROL_ITEMS (5 + ENABLED(HAS_LEVELING))
    if (select_control.inc(CONTROL_ITEMS)) {
      if (select_control.now > MROWS && select_control.now > index_control) {
        index_control = select_control.now;
        Scroll_Menu(DWIN_SCROLL_UP);
        Draw_Menu_Icon(MROWS, ICON_Temperature+select_control.now-1);
        Draw_More_Icon(1+MROWS-index_control);  // Temperature >
        Draw_More_Icon(2+MROWS-index_control);  // Motion >
        if (index_control > MROWS) {
          Draw_More_Icon(6+MROWS-index_control);  // Info >
          if (HMI_flag.language_flag)
            DWIN_Frame_AreaCopy(1, 231, 104, 271-13, 479-363, LBLX, MBASE(5));
          else
            DWIN_Frame_AreaCopy(1, 0, 104, 271-247, 479-365, LBLX, MBASE(5));
        }
      }
      else
        Move_Highlight(1, select_control.now+MROWS-index_control);
    }
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW) {
    if (select_control.dec()) {
      if (select_control.now < index_control-MROWS) {
        index_control--;
        Scroll_Menu(DWIN_SCROLL_DOWN);
        if (index_control == MROWS)
          Draw_Back_First();
        else
          Draw_Menu_Line(0, ICON_Temperature+select_control.now-1);
        Draw_More_Icon(0+MROWS-index_control+1);  // Temperature >
        Draw_More_Icon(1+MROWS-index_control+1);  // Motion >
      }
      else
        Move_Highlight(-1, select_control.now+MROWS-index_control);
    }
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    switch (select_control.now) {
      case 0: // back
        select_page.set(2);
        Goto_MainMenu();
        break;
      case 1: // temperature
        checkkey = TemperatureID;
        HMI_ValueStruct.show_mode = -1;
        select_temp.reset();
        Draw_Temperature_Menu();
        break;
      case 2: // motion
        checkkey = Motion;
        select_motion.reset();
        Draw_Motion_Menu();
        break;
      case 3: // write EEPROM
        if (settings.save()) {
          buzzer.tone(100, 659);
          buzzer.tone(100, 698);
        }
        else buzzer.tone(20, 440);
        break;
      case 4: // read EEPROM
          if (settings.load()) {
            buzzer.tone(100, 659);
            buzzer.tone(100, 698);
          }
          else buzzer.tone(20, 440);
        break;
      case 5: // resume EEPROM
        settings.reset();
        #if HAS_BUZZER
          buzzer.tone(100, 659);
          buzzer.tone(100, 698);
        #endif
        break;
      case 6: // info
        checkkey = Info;
        Draw_Info_Menu();
        break;
      default:
        break;
    }
  }
  DWIN_UpdateLCD();
}

/* Leveling */
void HMI_Leveling(void) {
  Popup_Window_Leveling();
  DWIN_UpdateLCD();
  queue.inject_P(PSTR("G29"));
}

/* Axis Move */
void HMI_AxisMove(void) {
  ENCODER_DiffState encoder_diffState = get_encoder_state();
  if (encoder_diffState == ENCODER_DIFF_NO) return;

  // popup window resume
  if (HMI_flag.ETempTooLow_flag) {
    if (encoder_diffState == ENCODER_DIFF_ENTER) {
      HMI_flag.ETempTooLow_flag = 0;
      Draw_Move_Menu();
      current_position.e = HMI_ValueStruct.Move_E_scale = 0;
      DWIN_Draw_FloatValue(true,true,0,font8x16,White,Background_black, 3, 1, 216, MBASE(1), HMI_ValueStruct.Move_X_scale);
      DWIN_Draw_FloatValue(true,true,0,font8x16,White,Background_black, 3, 1, 216, MBASE(2), HMI_ValueStruct.Move_Y_scale);
      DWIN_Draw_FloatValue(true,true,0,font8x16,White,Background_black, 3, 1, 216, MBASE(3), HMI_ValueStruct.Move_Z_scale);
      show_plus_or_minus(font8x16, Background_black, 3, 1, 216, MBASE(4), HMI_ValueStruct.Move_E_scale);
      DWIN_UpdateLCD();
    }
    return;
  }
  // Avoid flicker by updating only the previous menu
  if (encoder_diffState == ENCODER_DIFF_CW) {
    if (select_axis.inc(4)) Move_Highlight(1, select_axis.now);
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW) {
    if (select_axis.dec()) Move_Highlight(-1, select_axis.now);
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    switch (select_axis.now) {
      case 0: // back
        checkkey = Prepare;
        select_prepare.set(1);
        index_prepare = MROWS;
        Draw_Prepare_Menu();
        break;
      case 1: // X axis move
        checkkey = Move_X;
        HMI_ValueStruct.Move_X_scale = current_position[X_AXIS]*MinUnitMult;
        DWIN_Draw_FloatValue(true,true,0,font8x16,White,Select_Color, 3, 1, 216, MBASE(1), HMI_ValueStruct.Move_X_scale);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 2: // Y axis move
        checkkey = Move_Y;
        HMI_ValueStruct.Move_Y_scale = current_position[Y_AXIS]*MinUnitMult;
        DWIN_Draw_FloatValue(true,true,0,font8x16,White,Select_Color, 3, 1, 216, MBASE(2), HMI_ValueStruct.Move_Y_scale);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 3: // Z axis move
        checkkey = Move_Z;
        HMI_ValueStruct.Move_Z_scale = current_position[Z_AXIS]*MinUnitMult;
        DWIN_Draw_FloatValue(true,true,0,font8x16,White,Select_Color, 3, 1, 216, MBASE(3), HMI_ValueStruct.Move_Z_scale);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 4: // Extruder
        // window tips
        #ifdef PREVENT_COLD_EXTRUSION
          if (thermalManager.temp_hotend[0].celsius < EXTRUDE_MINTEMP) {
            HMI_flag.ETempTooLow_flag = 1;
            Popup_Window_ETempTooLow();
            DWIN_UpdateLCD();
            return;
          }
        #endif
        checkkey = Extruder;
        HMI_ValueStruct.Move_E_scale = current_position.e*MinUnitMult;
        show_plus_or_minus(font8x16, Select_Color, 3, 1, 216, MBASE(4), HMI_ValueStruct.Move_E_scale);
        EncoderRate.encoderRateEnabled = 1;
        break;
      default:
        break;
    }
  }
  DWIN_UpdateLCD();
}

/* TemperatureID */
void HMI_Temperature(void) {
  ENCODER_DiffState encoder_diffState = get_encoder_state();
  if (encoder_diffState == ENCODER_DIFF_NO) return;

  // Avoid flicker by updating only the previous menu
  if (encoder_diffState == ENCODER_DIFF_CW) {
    if (select_temp.inc(5)) Move_Highlight(1, select_temp.now);
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW) {
    if (select_temp.dec()) Move_Highlight(-1, select_temp.now);
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    switch (select_temp.now) {
      case 0: // back
        checkkey = Control;
        select_control.set(1);
        index_control = MROWS;
        Draw_Control_Menu();
        break;
      case 1: // nozzle temperature
        checkkey = ETemp;
        HMI_ValueStruct.E_Temp = thermalManager.temp_hotend[0].target;
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(1), thermalManager.temp_hotend[0].target);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 2: // bed temperature
        checkkey = BedTemp;
        HMI_ValueStruct.Bed_Temp = thermalManager.temp_bed.target;
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(2), thermalManager.temp_bed.target);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 3: // fan speed
        checkkey = FanSpeed;
        HMI_ValueStruct.Fan_speed = thermalManager.fan_speed[0];
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(3), thermalManager.fan_speed[0]);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 4: // PLA preheat setting

        checkkey = PLAPreheat;
        select_PLA.reset();
        HMI_ValueStruct.show_mode = -2;

        Clear_Main_Window();

        if (HMI_flag.language_flag) {
          DWIN_Frame_AreaCopy(1, 59, 16, 271-132, 479-450, 14, 8);

          DWIN_Frame_AreaCopy(1, 100, 89, 124, 479-378, LBLX, MBASE(1));
          DWIN_Frame_AreaCopy(1, 1, 134, 271-215, 479-333, LBLX+24, MBASE(1));   // PLA nozzle temp
          DWIN_Frame_AreaCopy(1, 100, 89, 124, 479-378, LBLX, MBASE(2));
          DWIN_Frame_AreaCopy(1, 58, 134, 271-158, 479-333, LBLX+24, MBASE(2));  // PLA bed temp
          DWIN_Frame_AreaCopy(1, 100, 89, 124, 479-378, LBLX, MBASE(3));
          DWIN_Frame_AreaCopy(1, 115, 134, 271-101, 479-333, LBLX+24, MBASE(3)); // PLA fan speed
          DWIN_Frame_AreaCopy(1, 72, 148, 271-120, 479-317, LBLX, MBASE(4));     // save PLA configuration
        }
        else {
          #ifdef USE_STRING_HEADINGS
            Draw_Title("PLA Settings"); // TODO: GET_TEXT_F
          #else
            DWIN_Frame_AreaCopy(1, 56, 16, 271-130, 479-450-1, 14, 8);
          #endif

          DWIN_Frame_AreaCopy(1, 157, 76, 181, 479-393, LBLX, MBASE(1));
          DWIN_Frame_AreaCopy(1, 197, 104, 271-33, 479-365, LBLX+24+3, MBASE(1));
          DWIN_Frame_AreaCopy(1, 1, 89, 271-188, 479-377-1, LBLX+24+41+6, MBASE(1)); // PLA nozzle temp
          DWIN_Frame_AreaCopy(1, 157, 76, 181, 479-393, LBLX, MBASE(2)+3);
          DWIN_Frame_AreaCopy(1, 240, 104, 271-7, 479-365, LBLX+24+3, MBASE(2)+3);
          DWIN_Frame_AreaCopy(1, 1, 89, 271-188, 479-377-1, LBLX+24+24+6, MBASE(2)+3); // PLA bed temp
          DWIN_Frame_AreaCopy(1, 157, 76, 181, 479-393, LBLX, MBASE(3));
          DWIN_Frame_AreaCopy(1, 0, 119, 271-207, 479-347, LBLX+24+3, MBASE(3));   // PLA fan speed
          DWIN_Frame_AreaCopy(1, 97, 165, 271-42, 479-301-1, LBLX, MBASE(4));      // save PLA configuration
        }

        Draw_Back_First();

        Draw_Menu_Line(1, ICON_SetEndTemp);
        Draw_Menu_Line(2, ICON_SetBedTemp);
        Draw_Menu_Line(3, ICON_FanSpeed);
        Draw_Menu_Line(4, ICON_WriteEEPROM);

        DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(1), HMI_ValueStruct.preheat_hotend_temp[0]);
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(2), HMI_ValueStruct.preheat_bed_temp[0]);
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(3), HMI_ValueStruct.preheat_fan_speed[0]);

        break;
      case 5: // ABS preheat setting

        checkkey = ABSPreheat;
        select_ABS.reset();
        HMI_ValueStruct.show_mode = -3;

        Clear_Main_Window();

        if (HMI_flag.language_flag) {
          DWIN_Frame_AreaCopy(1, 142, 16, 271-48, 479-450, 14, 8);

          DWIN_Frame_AreaCopy(1, 180, 89, 204, 479-379, LBLX, MBASE(1));
          DWIN_Frame_AreaCopy(1, 1, 134, 271-215, 479-333, LBLX+24, MBASE(1));   // ABS nozzle temp
          DWIN_Frame_AreaCopy(1, 180, 89, 204, 479-379, LBLX, MBASE(2));
          DWIN_Frame_AreaCopy(1, 58, 134, 271-158, 479-333, LBLX+24, MBASE(2));  // ABS bed temp
          DWIN_Frame_AreaCopy(1, 180, 89, 204, 479-379, LBLX, MBASE(3));
          DWIN_Frame_AreaCopy(1, 115, 134, 271-101, 479-333, LBLX+24, MBASE(3)); // ABS fan speed
          DWIN_Frame_AreaCopy(1, 72, 148, 271-120, 479-317, LBLX, MBASE(4));
          DWIN_Frame_AreaCopy(1, 180, 89, 204, 479-379, LBLX+28, MBASE(4)+2);    // save ABS configuration
        }
        else {
          #ifdef USE_STRING_HEADINGS
            Draw_Title("ABS Settings"); // TODO: GET_TEXT_F
          #else
            DWIN_Frame_AreaCopy(1, 56, 16, 271-130, 479-450-1, 14, 8);
          #endif

          DWIN_Frame_AreaCopy(1, 172, 76, 198, 479-393, LBLX, MBASE(1));
          DWIN_Frame_AreaCopy(1, 197, 104, 271-33, 479-365, LBLX+24+3, MBASE(1));
          DWIN_Frame_AreaCopy(1, 1, 89, 271-188, 479-377-1, LBLX+24+41+6, MBASE(1)); // ABS nozzle temp
          DWIN_Frame_AreaCopy(1, 172, 76, 198, 479-393, LBLX, MBASE(2)+3);
          DWIN_Frame_AreaCopy(1, 240, 104, 271-7, 479-365, LBLX+24+3, MBASE(2)+3);
          DWIN_Frame_AreaCopy(1, 1, 89, 271-188, 479-377-1, LBLX+24+24+6, MBASE(2)+3); // ABS bed temp
          DWIN_Frame_AreaCopy(1, 172, 76, 198, 479-393, LBLX, MBASE(3));
          DWIN_Frame_AreaCopy(1, 0, 119, 271-207, 479-347, LBLX+24+3, MBASE(3));     // ABS fan speed
          DWIN_Frame_AreaCopy(1, 97, 165, 271-42, 479-301-1, LBLX, MBASE(4));
          DWIN_Frame_AreaCopy(1, 172, 76, 198, 479-393, LBLX+33, MBASE(4));          // save ABS configuration
        }

        Draw_Back_First();

        Draw_Menu_Line(1, ICON_SetEndTemp);
        Draw_Menu_Line(2, ICON_SetBedTemp);
        Draw_Menu_Line(3, ICON_FanSpeed);
        Draw_Menu_Line(4, ICON_WriteEEPROM);

        DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(1), HMI_ValueStruct.preheat_hotend_temp[1]);
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(2), HMI_ValueStruct.preheat_bed_temp[1]);
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 3, 216, MBASE(3), HMI_ValueStruct.preheat_fan_speed[1]);

        break;
      default:
        break;
    }
  }
  DWIN_UpdateLCD();
}

inline void Draw_Max_Speed_Menu() {
  Clear_Main_Window();

  if (HMI_flag.language_flag) {
    DWIN_Frame_AreaCopy(1, 1, 16, 271-243, 479-451, 14, 8);

    auto say_max_speed = [](const uint16_t row) {
      DWIN_Frame_AreaCopy(1, 173, 133, 228, 479-332, LBLX, row);              // "Max speed"
    };

    say_max_speed(MBASE(1));                                                  // "Max speed"
    DWIN_Frame_AreaCopy(1, 229, 133, 236, 479-332, LBLX+55+3, MBASE(1));      // X
    say_max_speed(MBASE(2));                                                  // "Max speed"
    DWIN_Frame_AreaCopy(1, 1, 150, 271-264, 479-319, LBLX+55+3, MBASE(2)+3);  // Y
    say_max_speed(MBASE(3));                                                  // "Max speed"
    DWIN_Frame_AreaCopy(1, 9, 150, 271-255, 479-319, LBLX+55+3, MBASE(3)+3);  // Z
    say_max_speed(MBASE(4));                                                  // "Max speed"
    DWIN_Frame_AreaCopy(1, 18, 150, 271-246, 479-319, LBLX+55+3, MBASE(4)+3); // E
  }
  else {
    #ifdef USE_STRING_HEADINGS
      Draw_Title("Max Speed (mm/s)"); // TODO: GET_TEXT_F
    #else
      DWIN_Frame_AreaCopy(1, 144, 16, 271-82, 479-453, 14, 8);
    #endif

    draw_max_en(MBASE(1));                                                      // "Max"
    DWIN_Frame_AreaCopy(1, 184, 119, 271-37, 479-347, LBLX+24+3, MBASE(1));     // "Speed X"

    draw_max_en(MBASE(2));                                                      // "Max"
    draw_speed_en(24+3, MBASE(2));                                              // "Speed"
    say_y(24+40+6, MBASE(2));                                                   // "Y"

    draw_max_en(MBASE(3));                                                      // "Max"
    draw_speed_en(24+3, MBASE(3));                                              // "Speed"
    say_z(24+40+6, MBASE(3));                                                   // "Z"

    draw_max_en(MBASE(4));                                                      // "Max"
    draw_speed_en(24+3, MBASE(4));                                              // "Speed"
    say_e(24+40+6, MBASE(4));                                                   // "E"
  }

  Draw_Back_First();
  LOOP_L_N(i, 4) Draw_Menu_Line(i + 1, ICON_MaxSpeedX+i);

  DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 4, 210, MBASE(1), planner.settings.max_feedrate_mm_s[X_AXIS]);
  DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 4, 210, MBASE(2), planner.settings.max_feedrate_mm_s[Y_AXIS]);
  DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 4, 210, MBASE(3), planner.settings.max_feedrate_mm_s[Z_AXIS]);
  DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 4, 210, MBASE(4), planner.settings.max_feedrate_mm_s[E_AXIS]);
}

inline void Draw_Max_Accel_Menu() {
  Clear_Main_Window();

  if (HMI_flag.language_flag) {
    DWIN_Frame_AreaCopy(1, 1, 16, 271-243, 479-451, 14, 8);

    DWIN_Frame_AreaCopy(1, 173, 133, 200, 479-332, LBLX, MBASE(1));
    DWIN_Frame_AreaCopy(1, 28, 149, 271-202, 479-318, LBLX+27, MBASE(1)+1);
    DWIN_Frame_AreaCopy(1, 229, 133, 236, 479-332, LBLX+27+41+3, MBASE(1));    // max acceleration X
    DWIN_Frame_AreaCopy(1, 173, 133, 200, 479-332, LBLX, MBASE(2));
    DWIN_Frame_AreaCopy(1, 28, 149, 271-202, 479-318, LBLX+27, MBASE(2)+1);
    DWIN_Frame_AreaCopy(1, 1, 150, 271-264, 479-319, LBLX+27+41+3, MBASE(2)+2);  // max acceleration Y
    DWIN_Frame_AreaCopy(1, 173, 133, 200, 479-332, LBLX, MBASE(3));
    DWIN_Frame_AreaCopy(1, 28, 149, 271-202, 479-318, LBLX+27, MBASE(3)+1);
    DWIN_Frame_AreaCopy(1, 9, 150, 271-255, 479-319, LBLX+27+41+3, MBASE(3)+2);  // max acceleration Z
    DWIN_Frame_AreaCopy(1, 173, 133, 200, 479-332, LBLX, MBASE(4));
    DWIN_Frame_AreaCopy(1, 28, 149, 271-202, 479-318, LBLX+27, MBASE(4)+1);
    DWIN_Frame_AreaCopy(1, 18, 150, 271-246, 479-319, LBLX+27+41+3, MBASE(4)+2); // max acceleration E
  }
  else {
    #ifdef USE_STRING_HEADINGS
      Draw_Title("Max Accel (mm/s/s)"); // TODO: GET_TEXT_F
    #else
      DWIN_Frame_AreaCopy(1, 144, 16, 271-82, 479-453, 14, 8);
    #endif
    draw_max_accel_en(MBASE(1)); say_x(24+78+6, MBASE(1));  // "Max Acceleration X"
    draw_max_accel_en(MBASE(2)); say_y(24+78+6, MBASE(2));  // "Max Acceleration Y"
    draw_max_accel_en(MBASE(3)); say_z(24+78+6, MBASE(3));  // "Max Acceleration Z"
    draw_max_accel_en(MBASE(4)); say_e(24+78+6, MBASE(4));  // "Max Acceleration E"
  }

  Draw_Back_First();
  LOOP_L_N(i, 4) Draw_Menu_Line(i + 1, ICON_MaxAccX+i);

  DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 4, 210, MBASE(1), planner.settings.max_acceleration_mm_per_s2[X_AXIS]);
  DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 4, 210, MBASE(2), planner.settings.max_acceleration_mm_per_s2[Y_AXIS]);
  DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 4, 210, MBASE(3), planner.settings.max_acceleration_mm_per_s2[Z_AXIS]);
  DWIN_Draw_IntValue(true,true,0,font8x16,White,Background_black, 4, 210, MBASE(4), planner.settings.max_acceleration_mm_per_s2[E_AXIS]);
}

inline void Draw_Max_Jerk_Menu() {
  Clear_Main_Window();

  if (HMI_flag.language_flag) {
    DWIN_Frame_AreaCopy(1, 1, 16, 271-243, 479-451, 14, 8);

    DWIN_Frame_AreaCopy(1, 173, 133, 200, 479-332, LBLX, MBASE(1));
    DWIN_Frame_AreaCopy(1, 1, 180, 271-243, 479-287, LBLX+27, MBASE(1)+1);
    DWIN_Frame_AreaCopy(1, 202, 133, 228, 479-332, LBLX+53, MBASE(1));
    DWIN_Frame_AreaCopy(1, 229, 133, 236, 479-332, LBLX+80+3, MBASE(1));     // max corner speed X
    DWIN_Frame_AreaCopy(1, 173, 133, 200, 479-332, LBLX, MBASE(2));
    DWIN_Frame_AreaCopy(1, 1, 180, 271-243, 479-287, LBLX+27, MBASE(2)+1);
    DWIN_Frame_AreaCopy(1, 202, 133, 228, 479-332, LBLX+53, MBASE(2));
    DWIN_Frame_AreaCopy(1, 1, 150, 271-264, 479-319, LBLX+80+3, MBASE(2)+3);   // max corner speed Y
    DWIN_Frame_AreaCopy(1, 173, 133, 200, 479-332, LBLX, MBASE(3));
    DWIN_Frame_AreaCopy(1, 1, 180, 271-243, 479-287, LBLX+27, MBASE(3)+1);
    DWIN_Frame_AreaCopy(1, 202, 133, 228, 479-332, LBLX+53, MBASE(3));
    DWIN_Frame_AreaCopy(1, 9, 150, 271-255, 479-319, LBLX+80+3, MBASE(3)+3);   // max corner speed Z
    DWIN_Frame_AreaCopy(1, 173, 133, 200, 479-332, LBLX, MBASE(4));
    DWIN_Frame_AreaCopy(1, 1, 180, 271-243, 479-287, LBLX+27, MBASE(4)+1);
    DWIN_Frame_AreaCopy(1, 202, 133, 228, 479-332, LBLX+53, MBASE(4));
    DWIN_Frame_AreaCopy(1, 18, 150, 271-246, 479-319, LBLX+80+3, MBASE(4)+3);  // max corner speed E
  }
  else {
    #ifdef USE_STRING_HEADINGS
      Draw_Title("Max Corner"); // TODO: GET_TEXT_F
    #else
      DWIN_Frame_AreaCopy(1, 144, 16, 271-82, 479-453, 14, 8);
    #endif

    draw_max_en(MBASE(1));                                                      // "Max"
    draw_corner_en(MBASE(1));                                                   // "Corner"
    draw_speed_en(66+6, MBASE(1));                                              // "Speed"
    say_x(106+9, MBASE(1));                                                     // "X"

    draw_max_en(MBASE(2));                                                      // "Max"
    draw_corner_en(MBASE(2));                                                   // "Corner"
    draw_speed_en(66+6, MBASE(2));                                              // "Speed"
    say_y(106+9, MBASE(2));                                                     // "Y"

    draw_max_en(MBASE(3));                                                      // "Max"
    draw_corner_en(MBASE(3));                                                   // "Corner"
    draw_speed_en(66+6, MBASE(3));                                              // "Speed"
    say_z(106+9, MBASE(3));                                                     // "Z"

    draw_max_en(MBASE(4));                                                      // "Max"
    draw_corner_en(MBASE(4));                                                   // "Corner"
    draw_speed_en(66+6, MBASE(4));                                              // "Speed"
    say_e(106+9, MBASE(4));                                                     // "E"
  }

  Draw_Back_First();
  LOOP_L_N(i, 4) Draw_Menu_Line(i + 1, ICON_MaxSpeedCornerX+i);

  DWIN_Draw_FloatValue(true,true,0,font8x16,White,Background_black, 3, 1, 210, MBASE(1), planner.max_jerk[X_AXIS]*MinUnitMult);
  DWIN_Draw_FloatValue(true,true,0,font8x16,White,Background_black, 3, 1, 210, MBASE(2), planner.max_jerk[Y_AXIS]*MinUnitMult);
  DWIN_Draw_FloatValue(true,true,0,font8x16,White,Background_black, 3, 1, 210, MBASE(3), planner.max_jerk[Z_AXIS]*MinUnitMult);
  DWIN_Draw_FloatValue(true,true,0,font8x16,White,Background_black, 3, 1, 210, MBASE(4), planner.max_jerk[E_AXIS]*MinUnitMult);
}

inline void Draw_Steps_Menu() {
  Clear_Main_Window();

  if (HMI_flag.language_flag) {
    DWIN_Frame_AreaCopy(1, 1, 16, 271-243, 479-451, 14, 8);

    DWIN_Frame_AreaCopy(1, 153, 148, 271-77, 479-318, LBLX, MBASE(1));
    DWIN_Frame_AreaCopy(1, 229, 133, 236, 479-332, LBLX+41+3, MBASE(1));      // Transmission Ratio X
    DWIN_Frame_AreaCopy(1, 153, 148, 271-77, 479-318, LBLX, MBASE(2));
    DWIN_Frame_AreaCopy(1, 1, 150, 271-264, 479-319, LBLX+41+3, MBASE(2)+3);  // Transmission Ratio Y
    DWIN_Frame_AreaCopy(1, 153, 148, 271-77, 479-318, LBLX, MBASE(3));
    DWIN_Frame_AreaCopy(1, 9, 150, 271-255, 479-319, LBLX+41+3, MBASE(3)+3);  // Transmission Ratio Z
    DWIN_Frame_AreaCopy(1, 153, 148, 271-77, 479-318, LBLX, MBASE(4));
    DWIN_Frame_AreaCopy(1, 18, 150, 271-246, 479-319, LBLX+41+3, MBASE(4)+3); // Transmission Ratio E
  }
  else {
    #ifdef USE_STRING_HEADINGS
      Draw_Title("Steps-per-mm"); // TODO: GET_TEXT_F
    #else
      DWIN_Frame_AreaCopy(1, 144, 16, 271-82, 479-453, 14, 8);
    #endif
    draw_steps_per_mm(MBASE(1)); say_x(100+3, MBASE(1));  // "Steps-per-mm X"
    draw_steps_per_mm(MBASE(2)); say_y(100+3, MBASE(2));  // "Y"
    draw_steps_per_mm(MBASE(3)); say_z(100+3, MBASE(3));  // "Z"
    draw_steps_per_mm(MBASE(4)); say_e(100+3, MBASE(4));  // "E"
  }

  Draw_Back_First();
  LOOP_L_N(i, 4) Draw_Menu_Line(i + 1, ICON_StepX+i);

  DWIN_Draw_FloatValue(true,true,0,font8x16,White,Background_black, 3, 1, 210, MBASE(1), planner.settings.axis_steps_per_mm[X_AXIS]*MinUnitMult);
  DWIN_Draw_FloatValue(true,true,0,font8x16,White,Background_black, 3, 1, 210, MBASE(2), planner.settings.axis_steps_per_mm[Y_AXIS]*MinUnitMult);
  DWIN_Draw_FloatValue(true,true,0,font8x16,White,Background_black, 3, 1, 210, MBASE(3), planner.settings.axis_steps_per_mm[Z_AXIS]*MinUnitMult);
  DWIN_Draw_FloatValue(true,true,0,font8x16,White,Background_black, 3, 1, 210, MBASE(4), planner.settings.axis_steps_per_mm[E_AXIS]*MinUnitMult);
}

/* Motion */
void HMI_Motion(void) {
  ENCODER_DiffState encoder_diffState = get_encoder_state();
  if (encoder_diffState == ENCODER_DIFF_NO) return;

  // Avoid flicker by updating only the previous menu
  if (encoder_diffState == ENCODER_DIFF_CW) {
    if (select_motion.inc(4)) Move_Highlight(1, select_motion.now);
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW) {
    if (select_motion.dec()) Move_Highlight(-1, select_motion.now);
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    switch (select_motion.now) {
      case 0: // back
        checkkey = Control;
        select_control.set(2);
        index_control = MROWS;
        Draw_Control_Menu();
        break;
      case 1: // max speed
        checkkey = MaxSpeed;
        select_speed.reset();
        Draw_Max_Speed_Menu();
        break;
      case 2: // max acceleration
        checkkey = MaxAcceleration;
        select_acc.reset();
        Draw_Max_Accel_Menu();
        break;
      case 3: // max corner speed
        checkkey = MaxCorner;
        select_corner.reset();
        Draw_Max_Jerk_Menu();
        break;
      case 4: // transmission ratio
        checkkey = Step;
        select_step.reset();
        Draw_Steps_Menu();
        break;
      default:
        break;
    }
  }
  DWIN_UpdateLCD();
}

/* Info */
void HMI_Info(void) {
  ENCODER_DiffState encoder_diffState = get_encoder_state();
  if (encoder_diffState == ENCODER_DIFF_NO) return;
  if (encoder_diffState == ENCODER_DIFF_ENTER) {
    #if HAS_LEVELING
      checkkey = Control;
      select_control.set(CONTROL_ITEMS);
      Draw_Control_Menu()
    #else
      select_page.set(3);
      Goto_MainMenu();
    #endif
  }
  DWIN_UpdateLCD();
}

/* Tune */
void HMI_Tune(void) {
  ENCODER_DiffState encoder_diffState = get_encoder_state();
  if (encoder_diffState == ENCODER_DIFF_NO) return;

  // Avoid flicker by updating only the previous menu
  if (encoder_diffState == ENCODER_DIFF_CW) {
    if (select_tune.inc(6)) {
      if (select_tune.now > MROWS && select_tune.now > index_tune) {
        index_tune = select_tune.now;
        Scroll_Menu(DWIN_SCROLL_UP);
        Prepare_Item_Lang(5);
      }
      else
        Move_Highlight(1, select_tune.now + MROWS-index_tune);
    }
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW) {
    if (select_tune.dec()) {
      if (select_tune.now < index_tune-MROWS) {
        index_tune--;
        Scroll_Menu(DWIN_SCROLL_DOWN);
        if (index_tune == MROWS) Draw_Back_First();
      }
      else
        Move_Highlight(-1, select_tune.now + MROWS-index_tune);
    }
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    switch (select_tune.now) {
      case 0: { // back
        select_print.set(0);
        Goto_PrintProcess();
      } break;
      case 1: // print speed
        checkkey = PrintSpeed;
        HMI_ValueStruct.print_speed = feedrate_percentage;
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(1+MROWS-index_tune), feedrate_percentage);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 2: // nozzle temp
        checkkey = ETemp;
        HMI_ValueStruct.E_Temp = thermalManager.temp_hotend[0].target;
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(2+MROWS-index_tune), thermalManager.temp_hotend[0].target);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 3: // bed temp
        checkkey = BedTemp;
        HMI_ValueStruct.Bed_Temp = thermalManager.temp_bed.target;
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(3+MROWS-index_tune), thermalManager.temp_bed.target);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 4: // fan speed
        checkkey = FanSpeed;
        HMI_ValueStruct.Fan_speed = thermalManager.fan_speed[0];
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(4+MROWS-index_tune), thermalManager.fan_speed[0]);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 5: // z-offset
        checkkey = Homeoffset;
        HMI_ValueStruct.offset_value = BABY_Z_VAR * 100;
        show_plus_or_minus(font8x16, Select_Color, 2, 2, 202, MBASE(5+MROWS-index_tune), HMI_ValueStruct.offset_value);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 6: // language
        /* select language */
        HMI_flag.language_flag = !HMI_flag.language_flag;

        Clear_Main_Window();

        if (HMI_flag.language_flag) {
          set_chinese_to_eeprom();
          DWIN_JPG_CacheTo1(Language_Chinese);
        }
        else {
          set_english_to_eeprom();
          DWIN_JPG_CacheTo1(Language_English);
        }

        Draw_Tune_Menu();
        break;

      default: break;
    }
  }
  DWIN_UpdateLCD();
}

/* PLA Preheat */
void HMI_PLAPreheatSetting(void) {
  ENCODER_DiffState encoder_diffState = get_encoder_state();
  if (encoder_diffState == ENCODER_DIFF_NO) return;

  // Avoid flicker by updating only the previous menu
  if (encoder_diffState == ENCODER_DIFF_CW) {
    if (select_PLA.inc(4)) Move_Highlight(1, select_PLA.now);
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW) {
    if (select_PLA.dec()) Move_Highlight(-1, select_PLA.now);
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    switch (select_PLA.now) {
      case 0: // back
        checkkey = TemperatureID;
        select_temp.now = 4;
        HMI_ValueStruct.show_mode = -1;
        Draw_Temperature_Menu();
        break;
      case 1: // set nozzle temperature
        checkkey = ETemp;
        HMI_ValueStruct.E_Temp = HMI_ValueStruct.preheat_hotend_temp[0];
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(1), HMI_ValueStruct.preheat_hotend_temp[0]);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 2: // set bed temperature
        checkkey = BedTemp;
        HMI_ValueStruct.Bed_Temp = HMI_ValueStruct.preheat_bed_temp[0];
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(2), HMI_ValueStruct.preheat_bed_temp[0]);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 3: // set fan speed
        checkkey = FanSpeed;
        HMI_ValueStruct.Fan_speed = HMI_ValueStruct.preheat_fan_speed[0];
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(3), HMI_ValueStruct.preheat_fan_speed[0]);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 4: // save PLA configuration
        if (settings.save()) {
          buzzer.tone(100, 659);
          buzzer.tone(100, 698);
        }
        else buzzer.tone(20, 440);
        break;
      default:
        break;
    }
  }
  DWIN_UpdateLCD();
}

/* ABS Preheat */
void HMI_ABSPreheatSetting(void) {
  ENCODER_DiffState encoder_diffState = get_encoder_state();
  if (encoder_diffState == ENCODER_DIFF_NO) return;

  // Avoid flicker by updating only the previous menu
  if (encoder_diffState == ENCODER_DIFF_CW) {
    if (select_ABS.inc(4)) Move_Highlight(1, select_ABS.now);
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW) {
    if (select_ABS.dec()) Move_Highlight(-1, select_ABS.now);
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    switch (select_ABS.now) {
      case 0: // back
        checkkey = TemperatureID;
        select_temp.now = 5;
        HMI_ValueStruct.show_mode = -1;
        Draw_Temperature_Menu();
        break;
      case 1: // set nozzle temperature
        checkkey = ETemp;
        HMI_ValueStruct.E_Temp = HMI_ValueStruct.preheat_hotend_temp[1];
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(1), HMI_ValueStruct.preheat_hotend_temp[1]);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 2: // set bed temperature
        checkkey = BedTemp;
        HMI_ValueStruct.Bed_Temp = HMI_ValueStruct.preheat_bed_temp[1];
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(2), HMI_ValueStruct.preheat_bed_temp[1]);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 3: // set fan speed
        checkkey = FanSpeed;
        HMI_ValueStruct.Fan_speed = HMI_ValueStruct.preheat_fan_speed[1];
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 3, 216, MBASE(3), HMI_ValueStruct.preheat_fan_speed[1]);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 4: // save PLA configuration
        if (settings.save()) {
          buzzer.tone(100, 659);
          buzzer.tone(100, 698);
        }
        else buzzer.tone(20, 440);
        break;
      default:
        break;
    }
  }
  DWIN_UpdateLCD();
}

/* Max Speed */
void HMI_MaxSpeed(void) {
  ENCODER_DiffState encoder_diffState = get_encoder_state();
  if (encoder_diffState == ENCODER_DIFF_NO) return;

  // Avoid flicker by updating only the previous menu
  if (encoder_diffState == ENCODER_DIFF_CW) {
    if (select_speed.inc(4)) Move_Highlight(1, select_speed.now);
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW) {
    if (select_speed.dec()) Move_Highlight(-1, select_speed.now);
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    switch (select_speed.now) {
      case 0: // back
        checkkey = Motion;
        select_motion.now = 1;
        Draw_Motion_Menu();
        break;
      case 1: // max Speed X
        checkkey = MaxSpeed_value;
        HMI_flag.feedspeed_flag = X_AXIS;
        HMI_ValueStruct.Max_Feedspeed = planner.settings.max_feedrate_mm_s[X_AXIS];
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 4, 210, MBASE(select_speed.now), HMI_ValueStruct.Max_Feedspeed);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 2: // max Speed Y
        checkkey = MaxSpeed_value;
        HMI_flag.feedspeed_flag = Y_AXIS;
        HMI_ValueStruct.Max_Feedspeed = planner.settings.max_feedrate_mm_s[Y_AXIS];
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 4, 210, MBASE(select_speed.now), HMI_ValueStruct.Max_Feedspeed);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 3: // max Speed Z
        checkkey = MaxSpeed_value;
        HMI_flag.feedspeed_flag = Z_AXIS;
        HMI_ValueStruct.Max_Feedspeed = planner.settings.max_feedrate_mm_s[Z_AXIS];
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 4, 210, MBASE(select_speed.now), HMI_ValueStruct.Max_Feedspeed);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 4: // max Speed E
        checkkey = MaxSpeed_value;
        HMI_flag.feedspeed_flag = E_AXIS;
        HMI_ValueStruct.Max_Feedspeed = planner.settings.max_feedrate_mm_s[E_AXIS];
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 4, 210, MBASE(select_speed.now), HMI_ValueStruct.Max_Feedspeed);
        EncoderRate.encoderRateEnabled = 1;
        break;
      default:
        break;
    }
  }
  DWIN_UpdateLCD();
}

/* Max Acceleration */
void HMI_MaxAcceleration(void) {
  ENCODER_DiffState encoder_diffState = get_encoder_state();
  if (encoder_diffState == ENCODER_DIFF_NO) return;

  // Avoid flicker by updating only the previous menu
  if (encoder_diffState == ENCODER_DIFF_CW) {
    if (select_acc.inc(4)) Move_Highlight(1, select_acc.now);
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW) {
    if (select_acc.dec()) Move_Highlight(-1, select_acc.now);
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    switch (select_acc.now) {
      case 0: // back
        checkkey = Motion;
        select_motion.now = 2;
        Draw_Motion_Menu();
        break;
      case 1: // max acceleration X
        checkkey = MaxAcceleration_value;
        HMI_flag.acc_flag = X_AXIS;
        HMI_ValueStruct.Max_Acceleration = planner.settings.max_acceleration_mm_per_s2[X_AXIS];
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 4, 210, MBASE(select_acc.now), HMI_ValueStruct.Max_Acceleration);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 2: // max acceleration Y
        checkkey = MaxAcceleration_value;
        HMI_flag.acc_flag = Y_AXIS;
        HMI_ValueStruct.Max_Acceleration = planner.settings.max_acceleration_mm_per_s2[Y_AXIS];
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 4, 210, MBASE(select_acc.now), HMI_ValueStruct.Max_Acceleration);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 3: // max acceleration Z
        checkkey = MaxAcceleration_value;
        HMI_flag.acc_flag = Z_AXIS;
        HMI_ValueStruct.Max_Acceleration = planner.settings.max_acceleration_mm_per_s2[Z_AXIS];
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 4, 210, MBASE(select_acc.now), HMI_ValueStruct.Max_Acceleration);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 4: // max acceleration E
        checkkey = MaxAcceleration_value;
        HMI_flag.acc_flag = E_AXIS;
        HMI_ValueStruct.Max_Acceleration = planner.settings.max_acceleration_mm_per_s2[E_AXIS];
        DWIN_Draw_IntValue(true,true,0,font8x16,White,Select_Color, 4, 210, MBASE(select_acc.now), HMI_ValueStruct.Max_Acceleration);
        EncoderRate.encoderRateEnabled = 1;
        break;
      default:
        break;
    }
  }
  DWIN_UpdateLCD();
}

/* Max Corner */
void HMI_MaxCorner(void) {
  ENCODER_DiffState encoder_diffState = get_encoder_state();
  if (encoder_diffState == ENCODER_DIFF_NO) return;

  // Avoid flicker by updating only the previous menu
  if (encoder_diffState == ENCODER_DIFF_CW) {
    if (select_corner.inc(4)) Move_Highlight(1, select_corner.now);
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW) {
    if (select_corner.dec()) Move_Highlight(-1, select_corner.now);
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    switch (select_corner.now) {
      case 0: // back
        checkkey = Motion;
        select_motion.now = 3;
        Draw_Motion_Menu();
        break;
      case 1: // max corner X
        checkkey = MaxCorner_value;
        HMI_flag.corner_flag = X_AXIS;
        HMI_ValueStruct.Max_Corner = planner.max_jerk[X_AXIS]*MinUnitMult;
        DWIN_Draw_FloatValue(true,true,0,font8x16,White,Select_Color, 3, 1, 210, MBASE(select_corner.now), HMI_ValueStruct.Max_Corner);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 2: // max corner Y
        checkkey = MaxCorner_value;
        HMI_flag.corner_flag = Y_AXIS;
        HMI_ValueStruct.Max_Corner = planner.max_jerk[Y_AXIS]*MinUnitMult;
        DWIN_Draw_FloatValue(true,true,0,font8x16,White,Select_Color, 3, 1, 210, MBASE(select_corner.now), HMI_ValueStruct.Max_Corner);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 3: // max corner Z
        checkkey = MaxCorner_value;
        HMI_flag.corner_flag = Z_AXIS;
        HMI_ValueStruct.Max_Corner = planner.max_jerk[Z_AXIS]*MinUnitMult;
        DWIN_Draw_FloatValue(true,true,0,font8x16,White,Select_Color, 3, 1, 210, MBASE(select_corner.now), HMI_ValueStruct.Max_Corner);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 4: // max corner E
        checkkey = MaxCorner_value;
        HMI_flag.corner_flag = E_AXIS;
        HMI_ValueStruct.Max_Corner = planner.max_jerk[E_AXIS]*MinUnitMult;
        DWIN_Draw_FloatValue(true,true,0,font8x16,White,Select_Color, 3, 1, 210, MBASE(select_corner.now), HMI_ValueStruct.Max_Corner);
        EncoderRate.encoderRateEnabled = 1;
        break;
      default:
        break;
    }
  }
  DWIN_UpdateLCD();
}

/* Step */
void HMI_Step(void) {
  ENCODER_DiffState encoder_diffState = get_encoder_state();
  if (encoder_diffState == ENCODER_DIFF_NO) return;

  // Avoid flicker by updating only the previous menu
  if (encoder_diffState == ENCODER_DIFF_CW) {
    if (select_step.inc(4)) Move_Highlight(1, select_step.now);
  }
  else if (encoder_diffState == ENCODER_DIFF_CCW) {
    if (select_step.dec()) Move_Highlight(-1, select_step.now);
  }
  else if (encoder_diffState == ENCODER_DIFF_ENTER) {
    switch (select_step.now) {
      case 0: // back
        checkkey = Motion;
        select_motion.now = 4;
        Draw_Motion_Menu();
        break;
      case 1: // max step X
        checkkey = Step_value;
        HMI_flag.step_flag = X_AXIS;
        HMI_ValueStruct.Max_Step = planner.settings.axis_steps_per_mm[X_AXIS]*MinUnitMult;
        DWIN_Draw_FloatValue(true,true,0,font8x16,White,Select_Color, 3, 1, 210, MBASE(select_step.now), HMI_ValueStruct.Max_Step);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 2: // max step Y
        checkkey = Step_value;
        HMI_flag.step_flag = Y_AXIS;
        HMI_ValueStruct.Max_Step = planner.settings.axis_steps_per_mm[Y_AXIS]*MinUnitMult;
        DWIN_Draw_FloatValue(true,true,0,font8x16,White,Select_Color, 3, 1, 210, MBASE(select_step.now), HMI_ValueStruct.Max_Step);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 3: // max step Z
        checkkey = Step_value;
        HMI_flag.step_flag = Z_AXIS;
        HMI_ValueStruct.Max_Step = planner.settings.axis_steps_per_mm[Z_AXIS]*MinUnitMult;
        DWIN_Draw_FloatValue(true,true,0,font8x16,White,Select_Color, 3, 1, 210, MBASE(select_step.now), HMI_ValueStruct.Max_Step);
        EncoderRate.encoderRateEnabled = 1;
        break;
      case 4: // max step E
        checkkey = Step_value;
        HMI_flag.step_flag = E_AXIS;
        HMI_ValueStruct.Max_Step = planner.settings.axis_steps_per_mm[E_AXIS]*MinUnitMult;
        DWIN_Draw_FloatValue(true,true,0,font8x16,White,Select_Color, 3, 1, 210, MBASE(select_step.now), HMI_ValueStruct.Max_Step);
        EncoderRate.encoderRateEnabled = 1;
        break;
      default:
        break;
    }
  }
  DWIN_UpdateLCD();
}

void HMI_Init(void) {
  HMI_SDCardInit();

  for (uint16_t t = 0; t <= 100; t += 2) {
    DWIN_ICON_Show(ICON,ICON_Bar, 15, 260);
    DWIN_Draw_Rectangle(1, Background_black, 15 + t * 242/100, 260, 257, 280);
    DWIN_UpdateLCD();
    delay(20);
  }

  lcd_select_language();

  #if ENABLED(FIX_MOUNTED_PROBE) // For "CREALITY_TOUCH" probe too?
    SET_OUTPUT(COM_PIN);
    WRITE(COM_PIN, 1);
  #endif

  delay(200);
}

void DWIN_Update(void) {
  /* status update */
  EachMomentUpdate();

  /* sdcard update */
  HMI_SDCardUpdate();

  /* rotary encoder update */
  DWIN_HandleScreen();
}

void EachMomentUpdate(void) {
  static millis_t next_rts_update_ms = 0;
  const millis_t ms = millis();
  if (PENDING(ms, next_rts_update_ms)) return;
  next_rts_update_ms = ms + DWIN_SCROLL_UPDATE_INTERVAL;

  // variable update
  update_variable();

  if (checkkey == PrintProcess) {
    // if print done
    if (HMI_flag.print_finish && !HMI_flag.confirm_flag) {
      HMI_flag.print_finish = 0;
      HMI_flag.confirm_flag = 1;

      TERN_(POWER_LOSS_RECOVERY, recovery.cancel());

      planner.finish_and_disable();

      // show percent bar and value
      Percentrecord = 0;
      Draw_Print_ProgressBar();

      // show print done confirm
      DWIN_Draw_Rectangle(1, Background_black, 0, 250,  271, 360);
      DWIN_ICON_Show(ICON, HMI_flag.language_flag ? ICON_Confirm_C : ICON_Confirm_E, 86, 302-19);
    }
    else if (HMI_flag.pause_flag != printingIsPaused()) {
      // print status update
      HMI_flag.pause_flag = printingIsPaused();
      if (HMI_flag.pause_flag) ICON_Continue(); else ICON_Pause();
    }
  }

  // pause after homing
  if (pause_action_flag && printingIsPaused() && !planner.has_blocks_queued()) {
    pause_action_flag = 0;
    #if ENABLED(PAUSE_HEAT)
      tempbed = thermalManager.temp_bed.target;
      temphot = thermalManager.temp_hotend[0].target;
      thermalManager.disable_all_heaters();
    #endif
    queue.inject_P(PSTR("G1 F1200 X0 Y0"));
  }

  if (card.isPrinting() && checkkey == PrintProcess) { // print process
    const uint8_t card_pct = card.percentDone();
    static uint8_t last_cardpercentValue = 101;
    if (last_cardpercentValue != card_pct) { // print percent
      last_cardpercentValue = card_pct;
      if (card_pct) {
        Percentrecord = card_pct;
        Draw_Print_ProgressBar();
      }
    }

    duration_t elapsed = print_job_timer.duration();  // print timer
    /* already print time */
    const uint16_t min = (elapsed.value % 3600) / 60;
    if (last_Printtime != min) { // 1 minute update
      last_Printtime = min;
      Draw_Print_ProgressElapsed();
    }
    /* remain print time */
    static millis_t next_remain_time_update = 0;
    if (elapsed.minute() > 5 && ELAPSED(ms, next_remain_time_update) && HMI_flag.heat_flag == 0) { // show after 5 min and 20s update
      remain_time = ((elapsed.value - heat_time) * ((float)card.getFileSize() / (float)card.getIndex())) - (elapsed.value - heat_time);
      next_remain_time_update += 20 * 1000UL;
      Draw_Print_ProgressRemain();
    }
  }
  else if (abort_flag && !HMI_flag.home_flag)  { // Print Stop
    abort_flag = 0;
    HMI_ValueStruct.print_speed = feedrate_percentage = 100;
    zprobe_zoffset = TERN(HAS_LEVELING, probe.offset.z, 0);

    planner.finish_and_disable();

    #if DISABLED(SD_ABORT_NO_COOLDOWN)
      thermalManager.disable_all_heaters();
    #endif

    select_page.set(0);
    Goto_MainMenu();
  }
  else if (DWIN_lcd_sd_status && recovery.dwin_flag) { // resume print before power off
    recovery.dwin_flag = false;

    recovery.load();
    if (!recovery.valid()) return recovery.purge();

    auto draw_first_option = [](const bool sel) {
      const uint16_t c1 = sel ? Background_window : Select_Color;
      DWIN_Draw_Rectangle(0, c1, 25, 306, 126, 345);
      DWIN_Draw_Rectangle(0, c1, 24, 305, 127, 346);
    };

    auto update_selection = [&](const bool sel) {
      HMI_flag.select_flag = sel;
      draw_first_option(sel);
      const uint16_t c2 = sel ? Select_Color : Background_window;
      DWIN_Draw_Rectangle(0, c2, 145, 306, 246, 345);
      DWIN_Draw_Rectangle(0, c2, 144, 305, 247, 346);
    };

    LOOP_L_N(i, card.get_num_Files()) {
      // TODO: Resume print via M1000 then update the UI
      // with the active filename which can come from CardReader.
      card.getfilename_sorted(i);
      if (!strcmp(card.filename, &recovery.info.sd_filename[1])) { // Resume print before power failure while have the same file
        recovery_flag = 1;
        HMI_flag.select_flag = 1;
        Popup_Window_Resume();
        draw_first_option(false);
        char * const name = card.longest_filename();
        DWIN_Draw_String(false,true,font8x16, Font_window, Background_window, (DWIN_WIDTH-strlen(name)*MENU_CHR_W)/2, 252, name);
        DWIN_UpdateLCD();
        break;
      }
    }

    // if hasn't resumable G-code file
    if (!recovery_flag) return;

    while (recovery_flag) {
      ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze();
      if (encoder_diffState != ENCODER_DIFF_NO) {
        if (encoder_diffState == ENCODER_DIFF_ENTER) {
          recovery_flag = 0;
          if (HMI_flag.select_flag) break;
          TERN_(POWER_LOSS_RECOVERY, recovery.cancel());
          HMI_StartFrame(true);
          return;
        }
        else
          update_selection(encoder_diffState == ENCODER_DIFF_CCW);
        DWIN_UpdateLCD();
      }
    }

    select_print.set(0);
    HMI_ValueStruct.show_mode = 0;
    HMI_StartFrame(false);
    recovery.resume();
    return;
  }
  DWIN_UpdateLCD();
}

void DWIN_HandleScreen(void) {
  switch (checkkey) {
    case MainMenu:              HMI_MainMenu(); break;
    case SelectFile:            HMI_SelectFile(); break;
    case Prepare:               HMI_Prepare(); break;
    case Control:               HMI_Control(); break;
    case Leveling:              break;
    case PrintProcess:          HMI_Printing(); break;
    case Print_window:          HMI_PauseOrStop(); break;
    case AxisMove:              HMI_AxisMove(); break;
    case TemperatureID:         HMI_Temperature(); break;
    case Motion:                HMI_Motion(); break;
    case Info:                  HMI_Info(); break;
    case Tune:                  HMI_Tune(); break;
    case PLAPreheat:            HMI_PLAPreheatSetting(); break;
    case ABSPreheat:            HMI_ABSPreheatSetting(); break;
    case MaxSpeed:              HMI_MaxSpeed(); break;
    case MaxAcceleration:       HMI_MaxAcceleration(); break;
    case MaxCorner:             HMI_MaxCorner(); break;
    case Step:                  HMI_Step(); break;
    case Move_X:                HMI_Move_X(); break;
    case Move_Y:                HMI_Move_Y(); break;
    case Move_Z:                HMI_Move_Z(); break;
    case Extruder:              HMI_Move_E(); break;
    case Homeoffset:            HMI_Zoffset(); break;
    case ETemp:                 HMI_ETemp(); break;
    case BedTemp:               HMI_BedTemp(); break;
    case FanSpeed:              HMI_FanSpeed(); break;
    case PrintSpeed:            HMI_PrintSpeed(); break;
    case MaxSpeed_value:        HMI_MaxFeedspeedXYZE(); break;
    case MaxAcceleration_value: HMI_MaxAccelerationXYZE(); break;
    case MaxCorner_value:       HMI_MaxCornerXYZE(); break;
    case Step_value:            HMI_StepXYZE(); break;
    default: break;
  }
}

void DWIN_CompletedHoming(void) {
  HMI_flag.home_flag = false;
  if (checkkey == Last_Prepare) {
    checkkey = Prepare;
    select_prepare.now = 3;
    index_prepare = MROWS;
    Draw_Prepare_Menu();
  }
  else if (checkkey == Back_Main) {
    HMI_ValueStruct.print_speed = feedrate_percentage = 100;
    zprobe_zoffset = TERN0(BLTOUCH, probe.offset.z);
    planner.finish_and_disable();
    Goto_MainMenu();
  }
}

void DWIN_CompletedLeveling(void) {
  if (checkkey == Leveling) Goto_MainMenu();
}

#endif // DWIN_CREALITY_LCD