1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-
- /**
- * Description: HAL for Teensy32 (MK20DX256)
- */
-
- #ifdef __MK20DX256__
-
- #include "HAL.h"
- #include "../shared/Delay.h"
-
- #include <Wire.h>
-
- uint16_t HAL_adc_result;
-
- static const uint8_t pin2sc1a[] = {
- 5, 14, 8, 9, 13, 12, 6, 7, 15, 4, 0, 19, 3, 31, // 0-13, we treat them as A0-A13
- 5, 14, 8, 9, 13, 12, 6, 7, 15, 4, // 14-23 (A0-A9)
- 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, // 24-33
- 0+64, 19+64, 3+64, 31+64, // 34-37 (A10-A13)
- 26, 22, 23, 27, 29, 30 // 38-43: temp. sensor, VREF_OUT, A14, bandgap, VREFH, VREFL. A14 isn't connected to anything in Teensy 3.0.
- };
-
- /*
- // disable interrupts
- void cli() { noInterrupts(); }
-
- // enable interrupts
- void sei() { interrupts(); }
- */
-
- void HAL_adc_init() {
- analog_init();
- while (ADC0_SC3 & ADC_SC3_CAL) {}; // Wait for calibration to finish
- NVIC_ENABLE_IRQ(IRQ_FTM1);
- }
-
- void HAL_clear_reset_source() { }
-
- uint8_t HAL_get_reset_source() {
- switch (RCM_SRS0) {
- case 128: return RST_POWER_ON; break;
- case 64: return RST_EXTERNAL; break;
- case 32: return RST_WATCHDOG; break;
- // case 8: return RST_LOSS_OF_LOCK; break;
- // case 4: return RST_LOSS_OF_CLOCK; break;
- // case 2: return RST_LOW_VOLTAGE; break;
- }
- return 0;
- }
-
- extern "C" {
- extern char __bss_end;
- extern char __heap_start;
- extern void* __brkval;
-
- int freeMemory() {
- int free_memory;
- if ((int)__brkval == 0)
- free_memory = ((int)&free_memory) - ((int)&__bss_end);
- else
- free_memory = ((int)&free_memory) - ((int)__brkval);
- return free_memory;
- }
- }
-
- void HAL_adc_start_conversion(const uint8_t adc_pin) { ADC0_SC1A = pin2sc1a[adc_pin]; }
-
- uint16_t HAL_adc_get_result() { return ADC0_RA; }
-
- #endif // __MK20DX256__
|