123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123 |
- /**
- * Marlin 3D Printer Firmware
- *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
- * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Description: HAL for Teensy 3.5 and Teensy 3.6
- */
-
- #define CPU_32_BIT
-
- #include "../shared/Marduino.h"
- #include "../shared/math_32bit.h"
- #include "../shared/HAL_SPI.h"
-
- #include "fastio.h"
- #include "watchdog.h"
-
- #include "timers.h"
-
- #include <stdint.h>
-
- #define ST7920_DELAY_1 DELAY_NS(600)
- #define ST7920_DELAY_2 DELAY_NS(750)
- #define ST7920_DELAY_3 DELAY_NS(750)
-
- //#undef MOTHERBOARD
- //#define MOTHERBOARD BOARD_TEENSY31_32
-
- #define IS_32BIT_TEENSY defined(__MK20DX256__)
- #define IS_TEENSY32 defined(__MK20DX256__)
-
- #define NUM_SERIAL 1
-
- #if SERIAL_PORT == -1
- #define MYSERIAL0 SerialUSB
- #elif SERIAL_PORT == 0
- #define MYSERIAL0 Serial
- #elif SERIAL_PORT == 1
- #define MYSERIAL0 Serial1
- #elif SERIAL_PORT == 2
- #define MYSERIAL0 Serial2
- #elif SERIAL_PORT == 3
- #define MYSERIAL0 Serial3
- #endif
-
- #define HAL_SERVO_LIB libServo
-
- typedef int8_t pin_t;
-
- #ifndef analogInputToDigitalPin
- #define analogInputToDigitalPin(p) ((p < 12u) ? (p) + 54u : -1)
- #endif
-
- #define CRITICAL_SECTION_START() uint32_t primask = __get_PRIMASK(); __disable_irq()
- #define CRITICAL_SECTION_END() if (!primask) __enable_irq()
- #define ISRS_ENABLED() (!__get_PRIMASK())
- #define ENABLE_ISRS() __enable_irq()
- #define DISABLE_ISRS() __disable_irq()
-
- #ifndef strncpy_P
- #define strncpy_P(dest, src, num) strncpy((dest), (src), (num))
- #endif
-
- // Fix bug in pgm_read_ptr
- #undef pgm_read_ptr
- #define pgm_read_ptr(addr) (*((void**)(addr)))
- // Add type-checking to pgm_read_word
- #undef pgm_read_word
- #define pgm_read_word(addr) (*((uint16_t*)(addr)))
-
- inline void HAL_init() {}
-
- // Clear the reset reason
- void HAL_clear_reset_source();
-
- // Get the reason for the reset
- uint8_t HAL_get_reset_source();
-
- FORCE_INLINE void _delay_ms(const int delay_ms) { delay(delay_ms); }
-
- #pragma GCC diagnostic push
- #pragma GCC diagnostic ignored "-Wunused-function"
- extern "C" {
- int freeMemory();
- }
- #pragma GCC diagnostic pop
-
- // ADC
-
- void HAL_adc_init();
-
- #define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
- #define HAL_ADC_RESOLUTION 10
- #define HAL_READ_ADC() HAL_adc_get_result()
- #define HAL_ADC_READY() true
-
- #define HAL_ANALOG_SELECT(pin)
-
- void HAL_adc_start_conversion(const uint8_t adc_pin);
- uint16_t HAL_adc_get_result();
-
- #define GET_PIN_MAP_PIN(index) index
- #define GET_PIN_MAP_INDEX(pin) pin
- #define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
|