| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778 |
- /**
- * Open Motion controller with enable based extruders (Alpha!)
- *
- * ATMega644
- *
- * +---\/---+
- * (D 0) PB0 1| |40 PA0 (AI 0 / D31)
- * (D 1) PB1 2| |39 PA1 (AI 1 / D30)
- * INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29)
- * PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28)
- * PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27)
- * MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26)
- * MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25)
- * SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24)
- * RST 9| |32 AREF
- * VCC 10| |31 GND
- * GND 11| |30 AVCC
- * XTAL2 12| |29 PC7 (D 23)
- * XTAL1 13| |28 PC6 (D 22)
- * RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI
- * TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO
- * INT0 RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS
- * INT1 TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK
- * PWM (D 12) PD4 18| |23 PC1 (D 17) SDA
- * PWM (D 13) PD5 19| |22 PC0 (D 16) SCL
- * PWM (D 14) PD6 20| |21 PD7 (D 15) PWM
- * +--------+
- *
- */
-
- #ifndef __AVR_ATmega644__
- #error Oops! Make sure you have 'SanguinoA' selected from the 'Tools -> Boards' menu.
- #endif
-
- #define X_STEP_PIN 21
- #define X_DIR_PIN 20
- #define X_ENABLE_PIN 24
- #define X_STOP_PIN 0
-
- #define Y_STEP_PIN 23
- #define Y_DIR_PIN 22
- #define Y_ENABLE_PIN 24
- #define Y_STOP_PIN 1
-
- #define Z_STEP_PIN 26
- #define Z_DIR_PIN 25
- #define Z_ENABLE_PIN 24
- #define Z_STOP_PIN 2
-
- #define E0_STEP_PIN 28
- #define E0_DIR_PIN 27
- #define E0_ENABLE_PIN 24
-
- #define E1_STEP_PIN -1 // 19
- #define E1_DIR_PIN -1 // 18
- #define E1_ENABLE_PIN 24
-
- #define E2_STEP_PIN -1 // 17
- #define E2_DIR_PIN -1 // 16
- #define E2_ENABLE_PIN 24
-
- #define SDPOWER -1
- #define SDSS 11
- #define SDCARDDETECT -1 // 10 optional also used as mode pin
- #define LED_PIN -1
- #define FAN_PIN 3
- #define PS_ON_PIN -1
- #define KILL_PIN -1
-
- #define HEATER_0_PIN 4
- #define HEATER_1_PIN -1 // 12
- #define HEATER_2_PIN -1 // 13
- #define TEMP_0_PIN 0 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
- #define TEMP_1_PIN -1 // 1
- #define TEMP_2_PIN -1 // 2
- #define HEATER_BED_PIN -1 // 14/15
- #define TEMP_BED_PIN -1 // 1,2 or I2C
- /* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */
|
