1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253 |
- ##
- ## SSL settings
- ##
-
- # SSL/TLS support: yes, no, required. <doc/wiki/SSL.txt>
- ssl = required
-
- # PEM encoded X.509 SSL/TLS certificate and private key. They're opened before
- # dropping root privileges, so keep the key file unreadable by anyone but
- # root. Included doc/mkcert.sh can be used to easily generate self-signed
- # certificate, just make sure to update the domains in dovecot-openssl.cnf
- ssl_cert = </etc/letsencrypt/live/{{ domain }}/fullchain.pem
- ssl_key = </etc/letsencrypt/live/{{ domain }}/privkey.pem
-
- # If key file is password protected, give the password here. Alternatively
- # give it when starting dovecot with -p parameter. Since this file is often
- # world-readable, you may want to place this setting instead to a different
- # root owned 0600 file by using ssl_key_password = <path.
- #ssl_key_password =
-
- # PEM encoded trusted certificate authority. Set this only if you intend to use
- # ssl_verify_client_cert=yes. The file should contain the CA certificate(s)
- # followed by the matching CRL(s). (e.g. ssl_ca = </etc/ssl/certs/ca.pem)
- #ssl_ca = /etc/ssl/ca.pem
-
- # Require that CRL check succeeds for client certificates.
- #ssl_require_crl = yes
-
- # Request client to send a certificate. If you also want to require it, set
- # auth_ssl_require_client_cert=yes in auth section.
- #ssl_verify_client_cert = no
-
- # Which field from certificate to use for username. commonName and
- # x500UniqueIdentifier are the usual choices. You'll also need to set
- # auth_ssl_username_from_cert=yes.
- #ssl_cert_username_field = commonName
-
- # How often to regenerate the SSL parameters file. Generation is quite CPU
- # intensive operation. The value is in hours, 0 disables regeneration
- # entirely.
- #ssl_parameters_regenerate = 168
-
- # SSL protocols to use
- ssl_protocols = !SSLv3
-
- # SSL ciphers to use
- #ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL
-
- # SSL crypto device to use, for valid values run "openssl engine"
- #ssl_crypto_device =
-
- # DH parameters length to use.
- ssl_dh_parameters_length = 2048
|