external i3 am8 config files

input/projects/3d-printing/i3-am8.md

@@ -3,7 +3,7 @@ description: Rebuild of my i3 clone with aluminium extrusions, CoreXZ, Klipper
 parent: 3d-printing
 position: 10
 date: 2022-10-08
-update: 2022-10-22
+update: 2023-08-31
 comments: true
 ---
 
@@ -259,357 +259,29 @@ function copyEvent(id) {
 }
 </script>
 
-Here is my current `printer.cfg` file.
+[Here](https://git.xythobuz.de/thomas/3d-print-designs/raw/branch/master/configs/i3-AM8/printer.cfg) is my current `printer.cfg` file.
 <button type="button" onclick="copyEvent('printercfg')" class="clip-btn">Copy 'printer.cfg' to clipboard</button>
 
 <pre id="printercfg" class="sh_desktop">
-[include mainsail.cfg]
-
-##########################################
-################# System #################
-##########################################
-
-[printer]
-kinematics: corexz
-max_velocity: 200
-max_accel: 2000
-max_accel_to_decel: 2000
-max_z_velocity: 200
-max_z_accel: 500
-
-[board_pins]
-aliases:
-    # EXP1 header
-    EXP1_1=PB5,   EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
-    EXP1_2=PA15,  EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PD6, EXP1_10=<5V>,
-    # I/O header
-    IO_1=PD0, IO_2=PD2, IO_3=PD3, IO_4=PD4, IO_5=PD5,
-    # PWR-DET header
-    PWR_DET=PC12,
-    # Unused pin
-    UNUSED=PA6
-
-[mcu]
-#serial: /dev/ttyAMA0
-serial: /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A100OZQ1-if00-port0
-restart_method: command
-
-[temperature_sensor microcontroller]
-sensor_type: temperature_mcu
-min_temp: 0
-max_temp: 90
-gcode_id: mcu
-
-[temperature_sensor raspberry_pi]
-sensor_type: temperature_host
-min_temp: 0
-max_temp: 90
-gcode_id: pi
-
-##########################################
-################# Motors #################
-##########################################
-
-# The stepper_x section is used to describe the X axis as well as the
-# stepper controlling the X+Z movement.
-[stepper_x]
-step_pin: PB13
-dir_pin: !PB12
-enable_pin: !PB14
-microsteps: 16 # set by driver
-full_steps_per_rotation: 200 # motor specific
-gear_ratio: 36:20 # CoreXZ gearbox
-rotation_distance: 40 # 20 teeth * 2mm belt
-endstop_pin: ^!PC0
-position_endstop: -7.0
-position_min: -7.0
-position_max: 228.0
-homing_speed: 40
-second_homing_speed: 10
-
-# The stepper_y section is used to describe the stepper controlling
-# the Y axis.
-[stepper_y]
-step_pin: PB10
-dir_pin: PB2
-enable_pin: !PB11
-microsteps: 16 # set by driver
-full_steps_per_rotation: 200 # motor specific
-gear_ratio: 1:1 # driven directly
-rotation_distance: 40 # 20 teeth * 2mm belt
-endstop_pin: ^!PC1
-position_endstop: 0.0
-position_min: 0.0
-position_max: 210.0
-homing_speed: 40
-second_homing_speed: 10
-
-# The stepper_z section is used to describe the Z axis as well as the
-# stepper controlling the X-Z movement.
-[stepper_z]
-step_pin: PB0
-dir_pin: !PC5
-enable_pin: !PB1
-microsteps: 16 # set by driver
-full_steps_per_rotation: 200 # motor specific
-gear_ratio: 36:20 # CoreXZ gearbox
-rotation_distance: 40 # 20 teeth * 2mm belt
-endstop_pin: ^!PC2
-position_endstop: 0.200
-position_min: 0.0
-position_max: 275.0
-homing_speed: 40
-second_homing_speed: 10
-
-[extruder]
-step_pin: PB3
-dir_pin: !PB4
-enable_pin: !PD1
-rotation_distance: 22.67895
-gear_ratio: 50:8
-microsteps: 16
-full_steps_per_rotation: 200
-nozzle_diameter: 0.400
-filament_diameter: 1.750
-heater_pin: PC8
-sensor_type: ATC Semitec 104GT-2
-sensor_pin: PA0
-control: pid
-pid_Kp: 23.441
-pid_Ki: 0.919
-pid_Kd: 149.435
-min_temp: 0
-max_temp: 250
-max_extrude_only_distance: 1400.0
-max_extrude_only_velocity: 75.0
-max_extrude_only_accel: 1500
-
-[heater_bed]
-heater_pin: PC9
-sensor_type: EPCOS 100K B57560G104F
-sensor_pin: PC4
-control: pid
-pid_Kp: 43.878
-pid_Ki: 0.255
-pid_Kd: 1888.933
-min_temp: 0
-max_temp: 130
-
-###########################################
-################# TMC2209 #################
-###########################################
-
-[tmc2209 stepper_x]
-uart_pin: PC11
-tx_pin: PC10
-uart_address: 0
-stealthchop_threshold: 999999
-run_current: 0.6
-
-[tmc2209 stepper_y]
-uart_pin: PC11
-tx_pin: PC10
-uart_address: 2
-stealthchop_threshold: 999999
-run_current: 0.6
-
-[tmc2209 stepper_z]
-uart_pin: PC11
-tx_pin: PC10
-uart_address: 1
-stealthchop_threshold: 999999
-run_current: 0.6
-
-[tmc2209 extruder]
-uart_pin: PC11
-tx_pin: PC10
-uart_address: 3
-stealthchop_threshold: 999999
-run_current: 0.5
-
-###########################################
-############### Accessories ###############
-###########################################
-
-[heater_fan nozzle_cooling_fan]
-pin: PC6 # fan 0
-
-[fan]
-pin: PC7 # fan 1
-
-[controller_fan controller_fan]
-pin: PB15 # fan 2
-
-############################################
-############### Bed Leveling ###############
-############################################
-
-[bltouch]
-sensor_pin: ^PC14
-control_pin: PA1
-x_offset: -37
-y_offset: -2
-z_offset: 3.151
-speed: 10
-
-[bed_mesh]
-speed: 200
-mesh_min: 5, 5
-mesh_max: 190, 195
-horizontal_move_z: 10
-probe_count: 5, 5
-mesh_pps: 4, 4
-
-[gcode_macro G29]
-gcode:
-    BED_MESH_CALIBRATE
-
-###########################################
-########### LCD / Encoder / LED ###########
-###########################################
-
-[display]
-lcd_type: uc1701
-cs_pin: EXP1_2
-a0_pin: EXP1_3
-rst_pin: EXP1_5
-contrast: 63
-encoder_pins: ^IO_2, ^IO_3
-click_pin: ^!EXP1_1
-#kill_pin: ^IO_1
-spi_software_miso_pin: UNUSED
-spi_software_mosi_pin: IO_5
-spi_software_sclk_pin: IO_4
-
-# index 1 is lcd backlight
-# index 2 is left encoder led
-# index 3 is right encoder led
-[neopixel lcd]
-pin: EXP1_6
-chain_count: 3
-color_order: RGB
-initial_RED: 0.3
-initial_GREEN: 0.3
-initial_BLUE: 0.3
-
-##########################################
-################# Beeper #################
-##########################################
-
-# M300 : Play tone. Usage:
-#   M300 [P<ms>] [S<Hz>]
-#   P is the tone duration, S the tone frequency.
-
-[output_pin beeper]
-pin: PWR_DET
-pwm: True
-value: 0 # Silent at power on, set to 1 if active low.
-shutdown_value: 0 # Disable at emergency shutdown (no PWM would be available anyway).
-cycle_time: 0.001
-
-[gcode_macro M300]
-gcode:
-    # Use a default 1kHz tone if S is omitted.
-    \{% set S = params.S|default(1000)|int %}
-    # Use a 10ms duration is P is omitted.
-    \{% set P = params.P|default(100)|int %}
-    SET_PIN PIN=beeper VALUE=0.5 CYCLE_TIME={ 1.0/S if S > 0 else 1 }
-    G4 P{P}
-    SET_PIN PIN=beeper VALUE=0
-
-##########################################
-############## Idle Timeout ##############
-##########################################
-
-# https://moonraker.readthedocs.io/en/latest/configuration/#toggling-device-state-from-klipper
-
-[gcode_macro POWER_OFF_PRINTER]
-gcode:
-    {action_call_remote_method("set_device_power",
-                               device="printer",
-                               state="off")}
-
-[delayed_gcode delayed_printer_off]
-initial_duration: 0.
-gcode:
-    \{% if printer.idle_timeout.state == "Idle" %}
-        POWER_OFF_PRINTER
-    \{% endif %}
-
-[idle_timeout]
-gcode:
-    M84
-    TURN_OFF_HEATERS
-    UPDATE_DELAYED_GCODE ID=delayed_printer_off DURATION=60
-
-##########################################
-######### Telegram Bot Timelapse #########
-##########################################
-
-# https://github.com/nlef/moonraker-telegram-bot/wiki/installation#step-5-optional-include-the-macro-to-store-lapse-variables
-
-[gcode_macro _bot_data]
-variable_lapse_video_size: 0
-variable_lapse_filename: 'None'
-variable_lapse_path: 'None'
-gcode:
-    M118 Setting bot lapse variables
+<!--%
+include_url("https://git.xythobuz.de/thomas/3d-print-designs/raw/branch/master/configs/i3-AM8/printer.cfg")
+%-->
 </pre>
 
-Here is my current `moonraker.conf` file.
+[Here](https://git.xythobuz.de/thomas/3d-print-designs/raw/branch/master/configs/i3-AM8/moonraker.conf) is my current `moonraker.conf` file.
 <button type="button" onclick="copyEvent('moonrakerconf')" class="clip-btn">Copy 'moonraker.conf' to clipboard</button>
 
 <pre id="moonrakerconf" class="sh_desktop">
-[server]
-host: 0.0.0.0
-port: 7125
-# Verbose logging used for debugging . Default False.
-enable_debug_logging: False
-# The maximum size allowed for a file upload (in MiB).  Default 1024 MiB
-max_upload_size: 1024
-
-[file_manager]
-config_path: ~/klipper_config
-log_path: ~/klipper_logs
-enable_object_processing: True
-queue_gcode_uploads: True
-
-# https://moonraker.readthedocs.io/en/latest/configuration/#power-on-g-code-uploads
-
-[job_queue]
-load_on_startup: True
-
-[power printer]
-type: gpio
-pin: gpiochip0/gpio4
-off_when_shutdown: True
-off_when_shutdown_delay: 2
-on_when_job_queued: True
-locked_while_printing: True
-restart_klipper_when_powered: True
-restart_delay: 1
-initial_state: off
-
-# enables partial support of Octoprint API
-[octoprint_compat]
-
-# enables moonraker to track and store print history.
-[history]
-
-# this enables moonraker's update manager
-[update_manager]
-refresh_interval: 168
-
-[update_manager mainsail]
-type: web
-repo: mainsail-crew/mainsail
-path: ~/mainsail
-
-[update_manager client moonraker-telegram-bot]
-type: git_repo
-path: ~/moonraker-telegram-bot
-origin: https://github.com/nlef/moonraker-telegram-bot.git
-env: ~/moonraker-telegram-bot-env/bin/python
-requirements: scripts/requirements.txt
-install_script: scripts/install.sh
+<!--%
+include_url("https://git.xythobuz.de/thomas/3d-print-designs/raw/branch/master/configs/i3-AM8/moonraker.conf")
+%-->
+</pre>
+
+And [here](https://git.xythobuz.de/thomas/3d-print-designs/raw/branch/master/configs/i3-AM8/PrusaSlicer_config_bundle.ini) is my PrusaSlicer config bundle.
+<button type="button" onclick="copyEvent('prusabundle')" class="clip-btn">Copy PrusaSlicer config to clipboard</button>
+
+<pre id="prusabundle" class="sh_desktop">
+<!--%
+include_url("https://git.xythobuz.de/thomas/3d-print-designs/raw/branch/master/configs/i3-AM8/PrusaSlicer_config_bundle.ini")
+%-->
 </pre>