| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105 |
- # generated by PrusaSlicer 2.5.0 on 2023-01-03 at 11:14:59 UTC
- absolute_correction = 0
- area_fill = 50
- bed_custom_model =
- bed_custom_texture =
- bed_shape = 0x0,99.8169x0,99.8169x56.103,0x56.103
- bottle_cost = 0
- bottle_volume = 1000
- bottle_weight = 1
- compatible_printers_condition_cummulative = "printer_model==\"SL1\"";"printer_model==\"SL1\""
- compatible_prints =
- compatible_prints_condition = layer_height == 0.1
- compatible_prints_condition_cummulative = "layer_height == 0.1"
- default_sla_material_profile = Prusa Orange Tough @0.05
- default_sla_print_profile = 0.05 Normal
- display_height = 56.103
- display_mirror_x = 0
- display_mirror_y = 0
- display_orientation = landscape
- display_pixels_x = 854
- display_pixels_y = 480
- display_width = 99.8169
- elefant_foot_compensation = 0
- elefant_foot_min_width = 0.2
- exposure_time = 15
- faded_layers = 10
- fast_tilt_time = 5
- gamma_correction = 1
- high_viscosity_tilt_time = 10
- hollowing_closing_distance = 2
- hollowing_enable = 0
- hollowing_min_thickness = 3
- hollowing_quality = 0.5
- host_type = octoprint
- inherits_cummulative = "0.1 Fast";"Prusa Orange Tough @0.1";"Original Prusa SL1"
- initial_exposure_time = 120
- initial_layer_height = 0.1
- layer_height = 0.1
- material_colour = #FF8040
- material_correction = 1,1,1
- material_correction_x = 1
- material_correction_y = 1
- material_correction_z = 1
- material_density = 1
- material_notes =
- material_print_speed = fast
- material_type = Tough
- material_vendor = Made for Prusa
- max_exposure_time = 150
- max_initial_exposure_time = 300
- max_print_height = 120
- min_exposure_time = 1
- min_initial_exposure_time = 1
- output_filename_format = [input_filename_base].sl1
- pad_around_object = 0
- pad_around_object_everywhere = 0
- pad_brim_size = 1.6
- pad_enable = 1
- pad_max_merge_distance = 50
- pad_object_connector_penetration = 0.3
- pad_object_connector_stride = 10
- pad_object_connector_width = 0.5
- pad_object_gap = 1
- pad_wall_height = 0
- pad_wall_slope = 45
- pad_wall_thickness = 0.5
- physical_printer_settings_id =
- print_host =
- printer_model = SL1
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n
- printer_settings_id = Sparkmaker
- printer_technology = SLA
- printer_variant = default
- printer_vendor =
- printhost_apikey =
- printhost_cafile =
- relative_correction = 1,1
- relative_correction_x = 1
- relative_correction_y = 1
- relative_correction_z = 1
- sla_material_settings_id = Prusa Orange Tough @0.1 - Copy
- sla_print_settings_id = 0.1 Fast - Copy
- slice_closing_radius = 0.005
- slicing_mode = regular
- slow_tilt_time = 8
- support_base_diameter = 3
- support_base_height = 1
- support_base_safety_distance = 1
- support_buildplate_only = 0
- support_critical_angle = 45
- support_head_front_diameter = 0.5
- support_head_penetration = 0.5
- support_head_width = 3
- support_max_bridge_length = 10
- support_max_bridges_on_pillar = 3
- support_max_pillar_link_distance = 10
- support_object_elevation = 5
- support_pillar_connection_mode = zigzag
- support_pillar_diameter = 1.3
- support_pillar_widening_factor = 0
- support_points_density_relative = 100
- support_points_minimal_distance = 1
- support_small_pillar_diameter_percent = 60%
- supports_enable = 1
- thumbnails = 400x400,800x480
|
