12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024 |
- # generated by PrusaSlicer 2.5.0 on 2023-01-03 at 11:15:09 UTC
-
- [print:CTC i3 Pro B]
- avoid_crossing_perimeters = 1
- avoid_crossing_perimeters_max_detour = 50
- bottom_fill_pattern = rectilinear
- bottom_solid_layers = 4
- bottom_solid_min_thickness = 0.6
- bridge_acceleration = 0
- bridge_angle = 0
- bridge_flow_ratio = 1
- bridge_speed = 60
- brim_separation = 0
- brim_type = outer_only
- brim_width = 0
- clip_multipart_objects = 0
- compatible_printers = "CTC i3 Pro B";"CTC i3 Pro B PETG"
- compatible_printers_condition =
- complete_objects = 0
- default_acceleration = 0
- dont_support_bridges = 1
- draft_shield = disabled
- elefant_foot_compensation = 0
- ensure_vertical_shell_thickness = 1
- external_perimeter_extrusion_width = 0.45
- external_perimeter_speed = 50%
- external_perimeters_first = 0
- extra_perimeters = 1
- extruder_clearance_height = 20
- extruder_clearance_radius = 20
- extrusion_width = 0.45
- fill_angle = 45
- fill_density = 20%
- fill_pattern = honeycomb
- first_layer_acceleration = 0
- first_layer_acceleration_over_raft = 0
- first_layer_extrusion_width = 0.42
- first_layer_height = 0.1
- first_layer_speed = 30
- first_layer_speed_over_raft = 30
- fuzzy_skin = none
- fuzzy_skin_point_dist = 0.8
- fuzzy_skin_thickness = 0.3
- gap_fill_enabled = 1
- gap_fill_speed = 20
- gcode_comments = 0
- gcode_label_objects = 0
- gcode_resolution = 0.0125
- gcode_substitutions =
- infill_acceleration = 0
- infill_anchor = 600%
- infill_anchor_max = 50
- infill_every_layers = 1
- infill_extruder = 1
- infill_extrusion_width = 0.45
- infill_first = 0
- infill_only_where_needed = 0
- infill_overlap = 25%
- infill_speed = 80
- inherits =
- interface_shells = 0
- ironing = 0
- ironing_flowrate = 15%
- ironing_spacing = 0.1
- ironing_speed = 15
- ironing_type = top
- layer_height = 0.2
- max_print_speed = 80
- max_volumetric_extrusion_rate_slope_negative = 0
- max_volumetric_extrusion_rate_slope_positive = 0
- max_volumetric_speed = 0
- min_bead_width = 85%
- min_feature_size = 25%
- min_skirt_length = 30
- mmu_segmented_region_max_width = 0
- notes =
- only_retract_when_crossing_perimeters = 1
- ooze_prevention = 0
- output_filename_format = [input_filename_base].gcode
- overhangs = 1
- perimeter_acceleration = 0
- perimeter_extruder = 1
- perimeter_extrusion_width = 0.45
- perimeter_generator = arachne
- perimeter_speed = 60
- perimeters = 4
- post_process =
- print_settings_id =
- raft_contact_distance = 0.1
- raft_expansion = 1.5
- raft_first_layer_density = 90%
- raft_first_layer_expansion = 3
- raft_layers = 0
- resolution = 0
- seam_position = aligned
- single_extruder_multi_material_priming = 1
- skirt_distance = 6
- skirt_height = 1
- skirts = 1
- slice_closing_radius = 0.049
- slicing_mode = regular
- small_perimeter_speed = 15
- solid_infill_below_area = 70
- solid_infill_every_layers = 0
- solid_infill_extruder = 1
- solid_infill_extrusion_width = 0.45
- solid_infill_speed = 20
- spiral_vase = 0
- standby_temperature_delta = -5
- support_material = 0
- support_material_angle = 0
- support_material_auto = 1
- support_material_bottom_contact_distance = 0
- support_material_bottom_interface_layers = -1
- support_material_buildplate_only = 0
- support_material_closing_radius = 2
- support_material_contact_distance = 0.2
- support_material_enforce_layers = 0
- support_material_extruder = 1
- support_material_extrusion_width = 0.35
- support_material_interface_contact_loops = 0
- support_material_interface_extruder = 1
- support_material_interface_layers = 3
- support_material_interface_pattern = rectilinear
- support_material_interface_spacing = 0
- support_material_interface_speed = 100%
- support_material_pattern = rectilinear
- support_material_spacing = 2.5
- support_material_speed = 60
- support_material_style = grid
- support_material_synchronize_layers = 0
- support_material_threshold = 0
- support_material_with_sheath = 1
- support_material_xy_spacing = 50%
- thick_bridges = 1
- thin_walls = 1
- threads = 8
- top_fill_pattern = rectilinear
- top_infill_extrusion_width = 0.4
- top_solid_infill_speed = 15
- top_solid_layers = 4
- top_solid_min_thickness = 0.6
- travel_speed = 95
- travel_speed_z = 0
- wall_distribution_count = 1
- wall_transition_angle = 10
- wall_transition_filter_deviation = 25%
- wall_transition_length = 100%
- wipe_tower = 0
- wipe_tower_bridging = 10
- wipe_tower_brim_width = 2
- wipe_tower_no_sparse_layers = 0
- wipe_tower_rotation_angle = 0
- wipe_tower_width = 60
- wipe_tower_x = 180
- wipe_tower_y = 140
- xy_size_compensation = 0
-
- [print:CTC i3 Pro B 0.5mm Nozzle]
- avoid_crossing_perimeters = 1
- avoid_crossing_perimeters_max_detour = 50
- bottom_fill_pattern = rectilinear
- bottom_solid_layers = 4
- bottom_solid_min_thickness = 0.6
- bridge_acceleration = 0
- bridge_angle = 0
- bridge_flow_ratio = 1
- bridge_speed = 60
- brim_separation = 0
- brim_type = outer_only
- brim_width = 0
- clip_multipart_objects = 0
- compatible_printers = "CTC i3 Pro B";"CTC i3 Pro B PETG"
- compatible_printers_condition =
- complete_objects = 0
- default_acceleration = 0
- dont_support_bridges = 1
- draft_shield = disabled
- elefant_foot_compensation = 0.2
- ensure_vertical_shell_thickness = 1
- external_perimeter_extrusion_width = 0
- external_perimeter_speed = 50%
- external_perimeters_first = 0
- extra_perimeters = 1
- extruder_clearance_height = 20
- extruder_clearance_radius = 20
- extrusion_width = 0
- fill_angle = 45
- fill_density = 20%
- fill_pattern = honeycomb
- first_layer_acceleration = 0
- first_layer_acceleration_over_raft = 0
- first_layer_extrusion_width = 200%
- first_layer_height = 0.2
- first_layer_speed = 30
- first_layer_speed_over_raft = 30
- fuzzy_skin = none
- fuzzy_skin_point_dist = 0.8
- fuzzy_skin_thickness = 0.3
- gap_fill_enabled = 1
- gap_fill_speed = 20
- gcode_comments = 0
- gcode_label_objects = 0
- gcode_resolution = 0.0125
- gcode_substitutions =
- infill_acceleration = 0
- infill_anchor = 600%
- infill_anchor_max = 50
- infill_every_layers = 1
- infill_extruder = 1
- infill_extrusion_width = 0
- infill_first = 0
- infill_only_where_needed = 0
- infill_overlap = 25%
- infill_speed = 80
- inherits =
- interface_shells = 0
- ironing = 0
- ironing_flowrate = 15%
- ironing_spacing = 0.1
- ironing_speed = 15
- ironing_type = top
- layer_height = 0.3
- max_print_speed = 80
- max_volumetric_extrusion_rate_slope_negative = 0
- max_volumetric_extrusion_rate_slope_positive = 0
- max_volumetric_speed = 0
- min_bead_width = 85%
- min_feature_size = 25%
- min_skirt_length = 30
- mmu_segmented_region_max_width = 0
- notes =
- only_retract_when_crossing_perimeters = 1
- ooze_prevention = 0
- output_filename_format = [input_filename_base].gcode
- overhangs = 1
- perimeter_acceleration = 0
- perimeter_extruder = 1
- perimeter_extrusion_width = 0
- perimeter_generator = arachne
- perimeter_speed = 60
- perimeters = 4
- post_process =
- print_settings_id =
- raft_contact_distance = 0.1
- raft_expansion = 1.5
- raft_first_layer_density = 90%
- raft_first_layer_expansion = 3
- raft_layers = 0
- resolution = 0
- seam_position = aligned
- single_extruder_multi_material_priming = 1
- skirt_distance = 6
- skirt_height = 1
- skirts = 1
- slice_closing_radius = 0.049
- slicing_mode = regular
- small_perimeter_speed = 15
- solid_infill_below_area = 70
- solid_infill_every_layers = 0
- solid_infill_extruder = 1
- solid_infill_extrusion_width = 0
- solid_infill_speed = 20
- spiral_vase = 0
- standby_temperature_delta = -5
- support_material = 0
- support_material_angle = 0
- support_material_auto = 1
- support_material_bottom_contact_distance = 0
- support_material_bottom_interface_layers = -1
- support_material_buildplate_only = 0
- support_material_closing_radius = 2
- support_material_contact_distance = 0.2
- support_material_enforce_layers = 0
- support_material_extruder = 1
- support_material_extrusion_width = 0
- support_material_interface_contact_loops = 0
- support_material_interface_extruder = 1
- support_material_interface_layers = 3
- support_material_interface_pattern = rectilinear
- support_material_interface_spacing = 0
- support_material_interface_speed = 100%
- support_material_pattern = rectilinear
- support_material_spacing = 2.5
- support_material_speed = 60
- support_material_style = grid
- support_material_synchronize_layers = 0
- support_material_threshold = 0
- support_material_with_sheath = 1
- support_material_xy_spacing = 50%
- thick_bridges = 1
- thin_walls = 1
- threads = 8
- top_fill_pattern = rectilinear
- top_infill_extrusion_width = 0
- top_solid_infill_speed = 15
- top_solid_layers = 4
- top_solid_min_thickness = 0.6
- travel_speed = 95
- travel_speed_z = 0
- wall_distribution_count = 1
- wall_transition_angle = 10
- wall_transition_filter_deviation = 25%
- wall_transition_length = 100%
- wipe_tower = 0
- wipe_tower_bridging = 10
- wipe_tower_brim_width = 2
- wipe_tower_no_sparse_layers = 0
- wipe_tower_rotation_angle = 0
- wipe_tower_width = 60
- wipe_tower_x = 180
- wipe_tower_y = 140
- xy_size_compensation = 0
-
- [print:Ender-3 PLA Large]
- avoid_crossing_perimeters = 0
- avoid_crossing_perimeters_max_detour = 0
- bottom_fill_pattern = rectilinear
- bottom_solid_layers = 3
- bottom_solid_min_thickness = 0
- bridge_acceleration = 0
- bridge_angle = 0
- bridge_flow_ratio = 1
- bridge_speed = 60
- brim_separation = 0
- brim_type = outer_only
- brim_width = 0
- clip_multipart_objects = 0
- compatible_printers = Ender-3;"Ender-3 PETG"
- compatible_printers_condition =
- complete_objects = 0
- default_acceleration = 0
- dont_support_bridges = 1
- draft_shield = disabled
- elefant_foot_compensation = 0
- ensure_vertical_shell_thickness = 0
- external_perimeter_extrusion_width = 0.45
- external_perimeter_speed = 50%
- external_perimeters_first = 0
- extra_perimeters = 1
- extruder_clearance_height = 20
- extruder_clearance_radius = 20
- extrusion_width = 0.45
- fill_angle = 45
- fill_density = 20%
- fill_pattern = stars
- first_layer_acceleration = 0
- first_layer_acceleration_over_raft = 0
- first_layer_extrusion_width = 0.42
- first_layer_height = 0.1
- first_layer_speed = 30
- first_layer_speed_over_raft = 30
- fuzzy_skin = none
- fuzzy_skin_point_dist = 0.8
- fuzzy_skin_thickness = 0.3
- gap_fill_enabled = 1
- gap_fill_speed = 20
- gcode_comments = 0
- gcode_label_objects = 0
- gcode_resolution = 0.0125
- gcode_substitutions =
- infill_acceleration = 0
- infill_anchor = 600%
- infill_anchor_max = 50
- infill_every_layers = 1
- infill_extruder = 1
- infill_extrusion_width = 0.45
- infill_first = 0
- infill_only_where_needed = 0
- infill_overlap = 25%
- infill_speed = 80
- inherits =
- interface_shells = 0
- ironing = 0
- ironing_flowrate = 15%
- ironing_spacing = 0.1
- ironing_speed = 15
- ironing_type = top
- layer_height = 0.3
- max_print_speed = 80
- max_volumetric_extrusion_rate_slope_negative = 0
- max_volumetric_extrusion_rate_slope_positive = 0
- max_volumetric_speed = 0
- min_bead_width = 85%
- min_feature_size = 25%
- min_skirt_length = 50
- mmu_segmented_region_max_width = 0
- notes =
- only_retract_when_crossing_perimeters = 1
- ooze_prevention = 0
- output_filename_format = [input_filename_base].gcode
- overhangs = 1
- perimeter_acceleration = 0
- perimeter_extruder = 1
- perimeter_extrusion_width = 0.45
- perimeter_generator = arachne
- perimeter_speed = 60
- perimeters = 3
- post_process =
- print_settings_id =
- raft_contact_distance = 0.1
- raft_expansion = 1.5
- raft_first_layer_density = 90%
- raft_first_layer_expansion = 3
- raft_layers = 0
- resolution = 0
- seam_position = aligned
- single_extruder_multi_material_priming = 1
- skirt_distance = 6
- skirt_height = 1
- skirts = 3
- slice_closing_radius = 0.049
- slicing_mode = regular
- small_perimeter_speed = 15
- solid_infill_below_area = 70
- solid_infill_every_layers = 0
- solid_infill_extruder = 1
- solid_infill_extrusion_width = 0.45
- solid_infill_speed = 20
- spiral_vase = 0
- standby_temperature_delta = -5
- support_material = 0
- support_material_angle = 0
- support_material_auto = 1
- support_material_bottom_contact_distance = 0
- support_material_bottom_interface_layers = -1
- support_material_buildplate_only = 1
- support_material_closing_radius = 2
- support_material_contact_distance = 0.2
- support_material_enforce_layers = 0
- support_material_extruder = 1
- support_material_extrusion_width = 0.35
- support_material_interface_contact_loops = 0
- support_material_interface_extruder = 1
- support_material_interface_layers = 3
- support_material_interface_pattern = rectilinear
- support_material_interface_spacing = 0
- support_material_interface_speed = 100%
- support_material_pattern = rectilinear
- support_material_spacing = 2.5
- support_material_speed = 60
- support_material_style = grid
- support_material_synchronize_layers = 0
- support_material_threshold = 0
- support_material_with_sheath = 1
- support_material_xy_spacing = 50%
- thick_bridges = 1
- thin_walls = 1
- threads = 8
- top_fill_pattern = rectilinear
- top_infill_extrusion_width = 0.4
- top_solid_infill_speed = 15
- top_solid_layers = 3
- top_solid_min_thickness = 0
- travel_speed = 130
- travel_speed_z = 0
- wall_distribution_count = 1
- wall_transition_angle = 10
- wall_transition_filter_deviation = 25%
- wall_transition_length = 100%
- wipe_tower = 0
- wipe_tower_bridging = 10
- wipe_tower_brim_width = 2
- wipe_tower_no_sparse_layers = 0
- wipe_tower_rotation_angle = 0
- wipe_tower_width = 60
- wipe_tower_x = 180
- wipe_tower_y = 140
- xy_size_compensation = 0
-
- [print:Ender-3 PLA Mid]
- avoid_crossing_perimeters = 0
- avoid_crossing_perimeters_max_detour = 0
- bottom_fill_pattern = rectilinear
- bottom_solid_layers = 3
- bottom_solid_min_thickness = 0
- bridge_acceleration = 0
- bridge_angle = 0
- bridge_flow_ratio = 1
- bridge_speed = 60
- brim_separation = 0
- brim_type = outer_only
- brim_width = 0
- clip_multipart_objects = 0
- compatible_printers = Ender-3;"Ender-3 PETG"
- compatible_printers_condition =
- complete_objects = 0
- default_acceleration = 0
- dont_support_bridges = 1
- draft_shield = disabled
- elefant_foot_compensation = 0
- ensure_vertical_shell_thickness = 0
- external_perimeter_extrusion_width = 0.45
- external_perimeter_speed = 50%
- external_perimeters_first = 0
- extra_perimeters = 1
- extruder_clearance_height = 20
- extruder_clearance_radius = 20
- extrusion_width = 0.45
- fill_angle = 45
- fill_density = 20%
- fill_pattern = stars
- first_layer_acceleration = 0
- first_layer_acceleration_over_raft = 0
- first_layer_extrusion_width = 0.42
- first_layer_height = 0.1
- first_layer_speed = 30
- first_layer_speed_over_raft = 30
- fuzzy_skin = none
- fuzzy_skin_point_dist = 0.8
- fuzzy_skin_thickness = 0.3
- gap_fill_enabled = 1
- gap_fill_speed = 20
- gcode_comments = 0
- gcode_label_objects = 0
- gcode_resolution = 0.0125
- gcode_substitutions =
- infill_acceleration = 0
- infill_anchor = 600%
- infill_anchor_max = 50
- infill_every_layers = 1
- infill_extruder = 1
- infill_extrusion_width = 0.45
- infill_first = 0
- infill_only_where_needed = 0
- infill_overlap = 25%
- infill_speed = 80
- inherits =
- interface_shells = 0
- ironing = 0
- ironing_flowrate = 15%
- ironing_spacing = 0.1
- ironing_speed = 15
- ironing_type = top
- layer_height = 0.2
- max_print_speed = 80
- max_volumetric_extrusion_rate_slope_negative = 0
- max_volumetric_extrusion_rate_slope_positive = 0
- max_volumetric_speed = 0
- min_bead_width = 85%
- min_feature_size = 25%
- min_skirt_length = 50
- mmu_segmented_region_max_width = 0
- notes =
- only_retract_when_crossing_perimeters = 1
- ooze_prevention = 0
- output_filename_format = [input_filename_base].gcode
- overhangs = 1
- perimeter_acceleration = 0
- perimeter_extruder = 1
- perimeter_extrusion_width = 0.45
- perimeter_generator = arachne
- perimeter_speed = 60
- perimeters = 3
- post_process =
- print_settings_id =
- raft_contact_distance = 0.1
- raft_expansion = 1.5
- raft_first_layer_density = 90%
- raft_first_layer_expansion = 3
- raft_layers = 0
- resolution = 0
- seam_position = aligned
- single_extruder_multi_material_priming = 1
- skirt_distance = 6
- skirt_height = 1
- skirts = 3
- slice_closing_radius = 0.049
- slicing_mode = regular
- small_perimeter_speed = 15
- solid_infill_below_area = 70
- solid_infill_every_layers = 0
- solid_infill_extruder = 1
- solid_infill_extrusion_width = 0.45
- solid_infill_speed = 20
- spiral_vase = 0
- standby_temperature_delta = -5
- support_material = 0
- support_material_angle = 0
- support_material_auto = 1
- support_material_bottom_contact_distance = 0
- support_material_bottom_interface_layers = -1
- support_material_buildplate_only = 1
- support_material_closing_radius = 2
- support_material_contact_distance = 0.2
- support_material_enforce_layers = 0
- support_material_extruder = 1
- support_material_extrusion_width = 0.35
- support_material_interface_contact_loops = 0
- support_material_interface_extruder = 1
- support_material_interface_layers = 3
- support_material_interface_pattern = rectilinear
- support_material_interface_spacing = 0
- support_material_interface_speed = 100%
- support_material_pattern = rectilinear
- support_material_spacing = 2.5
- support_material_speed = 60
- support_material_style = grid
- support_material_synchronize_layers = 0
- support_material_threshold = 0
- support_material_with_sheath = 1
- support_material_xy_spacing = 50%
- thick_bridges = 1
- thin_walls = 1
- threads = 8
- top_fill_pattern = rectilinear
- top_infill_extrusion_width = 0.4
- top_solid_infill_speed = 15
- top_solid_layers = 3
- top_solid_min_thickness = 0
- travel_speed = 130
- travel_speed_z = 0
- wall_distribution_count = 1
- wall_transition_angle = 10
- wall_transition_filter_deviation = 25%
- wall_transition_length = 100%
- wipe_tower = 0
- wipe_tower_bridging = 10
- wipe_tower_brim_width = 2
- wipe_tower_no_sparse_layers = 0
- wipe_tower_rotation_angle = 0
- wipe_tower_width = 60
- wipe_tower_x = 180
- wipe_tower_y = 140
- xy_size_compensation = 0
-
- [print:Ender-3 PLA Small]
- avoid_crossing_perimeters = 0
- avoid_crossing_perimeters_max_detour = 0
- bottom_fill_pattern = rectilinear
- bottom_solid_layers = 3
- bottom_solid_min_thickness = 0
- bridge_acceleration = 0
- bridge_angle = 0
- bridge_flow_ratio = 1
- bridge_speed = 60
- brim_separation = 0
- brim_type = outer_only
- brim_width = 0
- clip_multipart_objects = 0
- compatible_printers = Ender-3;"Ender-3 PETG"
- compatible_printers_condition =
- complete_objects = 0
- default_acceleration = 0
- dont_support_bridges = 1
- draft_shield = disabled
- elefant_foot_compensation = 0
- ensure_vertical_shell_thickness = 0
- external_perimeter_extrusion_width = 0.45
- external_perimeter_speed = 50%
- external_perimeters_first = 0
- extra_perimeters = 1
- extruder_clearance_height = 20
- extruder_clearance_radius = 20
- extrusion_width = 0.45
- fill_angle = 45
- fill_density = 20%
- fill_pattern = stars
- first_layer_acceleration = 0
- first_layer_acceleration_over_raft = 0
- first_layer_extrusion_width = 0.42
- first_layer_height = 0.1
- first_layer_speed = 30
- first_layer_speed_over_raft = 30
- fuzzy_skin = none
- fuzzy_skin_point_dist = 0.8
- fuzzy_skin_thickness = 0.3
- gap_fill_enabled = 1
- gap_fill_speed = 20
- gcode_comments = 0
- gcode_label_objects = 0
- gcode_resolution = 0.0125
- gcode_substitutions =
- infill_acceleration = 0
- infill_anchor = 600%
- infill_anchor_max = 50
- infill_every_layers = 1
- infill_extruder = 1
- infill_extrusion_width = 0.45
- infill_first = 0
- infill_only_where_needed = 0
- infill_overlap = 25%
- infill_speed = 80
- inherits =
- interface_shells = 0
- ironing = 0
- ironing_flowrate = 15%
- ironing_spacing = 0.1
- ironing_speed = 15
- ironing_type = top
- layer_height = 0.1
- max_print_speed = 80
- max_volumetric_extrusion_rate_slope_negative = 0
- max_volumetric_extrusion_rate_slope_positive = 0
- max_volumetric_speed = 0
- min_bead_width = 85%
- min_feature_size = 25%
- min_skirt_length = 50
- mmu_segmented_region_max_width = 0
- notes =
- only_retract_when_crossing_perimeters = 1
- ooze_prevention = 0
- output_filename_format = [input_filename_base].gcode
- overhangs = 1
- perimeter_acceleration = 0
- perimeter_extruder = 1
- perimeter_extrusion_width = 0.45
- perimeter_generator = arachne
- perimeter_speed = 60
- perimeters = 3
- post_process =
- print_settings_id =
- raft_contact_distance = 0.1
- raft_expansion = 1.5
- raft_first_layer_density = 90%
- raft_first_layer_expansion = 3
- raft_layers = 0
- resolution = 0
- seam_position = aligned
- single_extruder_multi_material_priming = 1
- skirt_distance = 6
- skirt_height = 1
- skirts = 3
- slice_closing_radius = 0.049
- slicing_mode = regular
- small_perimeter_speed = 15
- solid_infill_below_area = 70
- solid_infill_every_layers = 0
- solid_infill_extruder = 1
- solid_infill_extrusion_width = 0.45
- solid_infill_speed = 20
- spiral_vase = 0
- standby_temperature_delta = -5
- support_material = 0
- support_material_angle = 0
- support_material_auto = 1
- support_material_bottom_contact_distance = 0
- support_material_bottom_interface_layers = -1
- support_material_buildplate_only = 1
- support_material_closing_radius = 2
- support_material_contact_distance = 0.2
- support_material_enforce_layers = 0
- support_material_extruder = 1
- support_material_extrusion_width = 0.35
- support_material_interface_contact_loops = 0
- support_material_interface_extruder = 1
- support_material_interface_layers = 3
- support_material_interface_pattern = rectilinear
- support_material_interface_spacing = 0
- support_material_interface_speed = 100%
- support_material_pattern = rectilinear
- support_material_spacing = 2.5
- support_material_speed = 60
- support_material_style = grid
- support_material_synchronize_layers = 0
- support_material_threshold = 0
- support_material_with_sheath = 1
- support_material_xy_spacing = 50%
- thick_bridges = 1
- thin_walls = 1
- threads = 8
- top_fill_pattern = rectilinear
- top_infill_extrusion_width = 0.4
- top_solid_infill_speed = 15
- top_solid_layers = 3
- top_solid_min_thickness = 0
- travel_speed = 130
- travel_speed_z = 0
- wall_distribution_count = 1
- wall_transition_angle = 10
- wall_transition_filter_deviation = 25%
- wall_transition_length = 100%
- wipe_tower = 0
- wipe_tower_bridging = 10
- wipe_tower_brim_width = 2
- wipe_tower_no_sparse_layers = 0
- wipe_tower_rotation_angle = 0
- wipe_tower_width = 60
- wipe_tower_x = 180
- wipe_tower_y = 140
- xy_size_compensation = 0
-
- [print:Fabrikator Mini]
- avoid_crossing_perimeters = 0
- avoid_crossing_perimeters_max_detour = 0
- bottom_fill_pattern = rectilinear
- bottom_solid_layers = 3
- bottom_solid_min_thickness = 0
- bridge_acceleration = 0
- bridge_angle = 0
- bridge_flow_ratio = 1
- bridge_speed = 20
- brim_separation = 0
- brim_type = outer_only
- brim_width = 4
- clip_multipart_objects = 0
- compatible_printers = "Fabrikator Mini"
- compatible_printers_condition =
- complete_objects = 0
- default_acceleration = 0
- dont_support_bridges = 1
- draft_shield = disabled
- elefant_foot_compensation = 0
- ensure_vertical_shell_thickness = 0
- external_perimeter_extrusion_width = 0.45
- external_perimeter_speed = 15
- external_perimeters_first = 0
- extra_perimeters = 1
- extruder_clearance_height = 20
- extruder_clearance_radius = 20
- extrusion_width = 0.45
- fill_angle = 45
- fill_density = 20%
- fill_pattern = stars
- first_layer_acceleration = 0
- first_layer_acceleration_over_raft = 0
- first_layer_extrusion_width = 0.42
- first_layer_height = 0.1
- first_layer_speed = 18
- first_layer_speed_over_raft = 30
- fuzzy_skin = none
- fuzzy_skin_point_dist = 0.8
- fuzzy_skin_thickness = 0.3
- gap_fill_enabled = 1
- gap_fill_speed = 20
- gcode_comments = 0
- gcode_label_objects = 0
- gcode_resolution = 0.0125
- gcode_substitutions =
- infill_acceleration = 0
- infill_anchor = 600%
- infill_anchor_max = 50
- infill_every_layers = 1
- infill_extruder = 1
- infill_extrusion_width = 0.45
- infill_first = 0
- infill_only_where_needed = 0
- infill_overlap = 25%
- infill_speed = 20
- inherits =
- interface_shells = 0
- ironing = 0
- ironing_flowrate = 15%
- ironing_spacing = 0.1
- ironing_speed = 15
- ironing_type = top
- layer_height = 0.2
- max_print_speed = 20
- max_volumetric_extrusion_rate_slope_negative = 0
- max_volumetric_extrusion_rate_slope_positive = 0
- max_volumetric_speed = 0
- min_bead_width = 85%
- min_feature_size = 25%
- min_skirt_length = 10
- mmu_segmented_region_max_width = 0
- notes =
- only_retract_when_crossing_perimeters = 1
- ooze_prevention = 0
- output_filename_format = [input_filename_base].gcode
- overhangs = 1
- perimeter_acceleration = 0
- perimeter_extruder = 1
- perimeter_extrusion_width = 0.45
- perimeter_generator = arachne
- perimeter_speed = 20
- perimeters = 3
- post_process =
- print_settings_id =
- raft_contact_distance = 0.1
- raft_expansion = 1.5
- raft_first_layer_density = 90%
- raft_first_layer_expansion = 3
- raft_layers = 0
- resolution = 0
- seam_position = aligned
- single_extruder_multi_material_priming = 1
- skirt_distance = 4
- skirt_height = 1
- skirts = 2
- slice_closing_radius = 0.049
- slicing_mode = regular
- small_perimeter_speed = 15
- solid_infill_below_area = 70
- solid_infill_every_layers = 0
- solid_infill_extruder = 1
- solid_infill_extrusion_width = 0.45
- solid_infill_speed = 20
- spiral_vase = 0
- standby_temperature_delta = -5
- support_material = 0
- support_material_angle = 0
- support_material_auto = 1
- support_material_bottom_contact_distance = 0
- support_material_bottom_interface_layers = -1
- support_material_buildplate_only = 1
- support_material_closing_radius = 2
- support_material_contact_distance = 0.2
- support_material_enforce_layers = 0
- support_material_extruder = 1
- support_material_extrusion_width = 0.35
- support_material_interface_contact_loops = 0
- support_material_interface_extruder = 1
- support_material_interface_layers = 3
- support_material_interface_pattern = rectilinear
- support_material_interface_spacing = 0
- support_material_interface_speed = 100%
- support_material_pattern = rectilinear
- support_material_spacing = 2.5
- support_material_speed = 20
- support_material_style = grid
- support_material_synchronize_layers = 0
- support_material_threshold = 0
- support_material_with_sheath = 1
- support_material_xy_spacing = 50%
- thick_bridges = 1
- thin_walls = 1
- threads = 8
- top_fill_pattern = rectilinear
- top_infill_extrusion_width = 0.4
- top_solid_infill_speed = 15
- top_solid_layers = 3
- top_solid_min_thickness = 0
- travel_speed = 20
- travel_speed_z = 0
- wall_distribution_count = 1
- wall_transition_angle = 10
- wall_transition_filter_deviation = 25%
- wall_transition_length = 100%
- wipe_tower = 0
- wipe_tower_bridging = 10
- wipe_tower_brim_width = 2
- wipe_tower_no_sparse_layers = 0
- wipe_tower_rotation_angle = 0
- wipe_tower_width = 60
- wipe_tower_x = 180
- wipe_tower_y = 140
- xy_size_compensation = 0
-
- [print:i3 AM8]
- avoid_crossing_perimeters = 1
- avoid_crossing_perimeters_max_detour = 0
- bottom_fill_pattern = monotonic
- bottom_solid_layers = 4
- bottom_solid_min_thickness = 0
- bridge_acceleration = 0
- bridge_angle = 0
- bridge_flow_ratio = 1
- bridge_speed = 120
- brim_separation = 0
- brim_type = outer_only
- brim_width = 0
- clip_multipart_objects = 1
- compatible_printers =
- compatible_printers_condition =
- complete_objects = 0
- default_acceleration = 0
- dont_support_bridges = 1
- draft_shield = disabled
- elefant_foot_compensation = 0
- ensure_vertical_shell_thickness = 1
- external_perimeter_extrusion_width = 0.45
- external_perimeter_speed = 60%
- external_perimeters_first = 0
- extra_perimeters = 1
- extruder_clearance_height = 20
- extruder_clearance_radius = 20
- extrusion_width = 0.45
- fill_angle = 45
- fill_density = 20%
- fill_pattern = honeycomb
- first_layer_acceleration = 0
- first_layer_acceleration_over_raft = 0
- first_layer_extrusion_width = 0.42
- first_layer_height = 0.2
- first_layer_speed = 50%
- first_layer_speed_over_raft = 30
- fuzzy_skin = none
- fuzzy_skin_point_dist = 0.8
- fuzzy_skin_thickness = 0.3
- gap_fill_enabled = 1
- gap_fill_speed = 30
- gcode_comments = 0
- gcode_label_objects = 0
- gcode_resolution = 0.0125
- gcode_substitutions =
- infill_acceleration = 0
- infill_anchor = 600%
- infill_anchor_max = 50
- infill_every_layers = 1
- infill_extruder = 1
- infill_extrusion_width = 0.45
- infill_first = 0
- infill_only_where_needed = 0
- infill_overlap = 25%
- infill_speed = 100
- inherits =
- interface_shells = 0
- ironing = 0
- ironing_flowrate = 15%
- ironing_spacing = 0.1
- ironing_speed = 15
- ironing_type = top
- layer_height = 0.3
- max_print_speed = 130
- max_volumetric_extrusion_rate_slope_negative = 0
- max_volumetric_extrusion_rate_slope_positive = 0
- max_volumetric_speed = 0
- min_bead_width = 85%
- min_feature_size = 25%
- min_skirt_length = 20
- mmu_segmented_region_max_width = 0
- notes =
- only_retract_when_crossing_perimeters = 0
- ooze_prevention = 0
- output_filename_format = [input_filename_base].gcode
- overhangs = 1
- perimeter_acceleration = 0
- perimeter_extruder = 1
- perimeter_extrusion_width = 0.45
- perimeter_generator = arachne
- perimeter_speed = 100
- perimeters = 4
- post_process =
- print_settings_id =
- raft_contact_distance = 0.1
- raft_expansion = 1.5
- raft_first_layer_density = 90%
- raft_first_layer_expansion = 3
- raft_layers = 0
- resolution = 0
- seam_position = aligned
- single_extruder_multi_material_priming = 1
- skirt_distance = 6
- skirt_height = 1
- skirts = 3
- slice_closing_radius = 0.049
- slicing_mode = regular
- small_perimeter_speed = 80%
- solid_infill_below_area = 70
- solid_infill_every_layers = 0
- solid_infill_extruder = 1
- solid_infill_extrusion_width = 0.45
- solid_infill_speed = 75%
- spiral_vase = 0
- standby_temperature_delta = -5
- support_material = 0
- support_material_angle = 0
- support_material_auto = 1
- support_material_bottom_contact_distance = 0
- support_material_bottom_interface_layers = -1
- support_material_buildplate_only = 1
- support_material_closing_radius = 2
- support_material_contact_distance = 0.2
- support_material_enforce_layers = 0
- support_material_extruder = 1
- support_material_extrusion_width = 0.35
- support_material_interface_contact_loops = 0
- support_material_interface_extruder = 1
- support_material_interface_layers = 3
- support_material_interface_pattern = rectilinear
- support_material_interface_spacing = 0
- support_material_interface_speed = 100%
- support_material_pattern = rectilinear
- support_material_spacing = 2.5
- support_material_speed = 80
- support_material_style = grid
- support_material_synchronize_layers = 0
- support_material_threshold = 0
- support_material_with_sheath = 1
- support_material_xy_spacing = 50%
- thick_bridges = 1
- thin_walls = 1
- threads = 8
- top_fill_pattern = monotonic
- top_infill_extrusion_width = 0.4
- top_solid_infill_speed = 75%
- top_solid_layers = 4
- top_solid_min_thickness = 0
- travel_speed = 130
- travel_speed_z = 0
- wall_distribution_count = 1
- wall_transition_angle = 10
- wall_transition_filter_deviation = 25%
- wall_transition_length = 100%
- wipe_tower = 0
- wipe_tower_bridging = 10
- wipe_tower_brim_width = 2
- wipe_tower_no_sparse_layers = 0
- wipe_tower_rotation_angle = 0
- wipe_tower_width = 60
- wipe_tower_x = 180
- wipe_tower_y = 140
- xy_size_compensation = 0
-
- [filament:CTC i3 Pro B PETG]
- bed_temperature = 60
- bridge_fan_speed = 100
- compatible_printers = "CTC i3 Pro B"
- compatible_printers_condition =
- compatible_prints = "CTC i3 Pro B";"CTC i3 Pro B 0.5mm Nozzle"
- compatible_prints_condition =
- cooling = 1
- disable_fan_first_layers = 3
- end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
- extrusion_multiplier = 1
- fan_always_on = 0
- fan_below_layer_time = 60
- filament_colour = #29B2B2
- filament_cooling_final_speed = 3.4
- filament_cooling_initial_speed = 2.2
- filament_cooling_moves = 4
- filament_cost = 25
- filament_density = 1.23
- filament_deretract_speed = nil
- filament_diameter = 1.75
- filament_load_time = 0
- filament_loading_speed = 28
- filament_loading_speed_start = 3
- filament_max_volumetric_speed = 0
- filament_minimal_purge_on_wipe_tower = 15
- filament_notes = ""
- filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
- filament_retract_before_travel = nil
- filament_retract_before_wipe = nil
- filament_retract_layer_change = nil
- filament_retract_length = nil
- filament_retract_lift = nil
- filament_retract_lift_above = nil
- filament_retract_lift_below = nil
- filament_retract_restart_extra = nil
- filament_retract_speed = nil
- filament_settings_id = ""
- filament_soluble = 0
- filament_spool_weight = 0
- filament_toolchange_delay = 0
- filament_type = PET
- filament_unload_time = 0
- filament_unloading_speed = 90
- filament_unloading_speed_start = 100
- filament_vendor = (Unknown)
- filament_wipe = nil
- first_layer_bed_temperature = 60
- first_layer_temperature = 220
- full_fan_speed_layer = 0
- inherits =
- max_fan_speed = 100
- min_fan_speed = 35
- min_print_speed = 10
- slowdown_below_layer_time = 5
- start_filament_gcode = "; Filament gcode\n"
- temperature = 220
-
- [filament:CTC i3 Pro B PLA]
- bed_temperature = 40
- bridge_fan_speed = 100
- compatible_printers = "CTC i3 Pro B"
- compatible_printers_condition =
- compatible_prints = "CTC i3 Pro B";"CTC i3 Pro B 0.5mm Nozzle"
- compatible_prints_condition =
- cooling = 1
- disable_fan_first_layers = 3
- end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
- extrusion_multiplier = 1
- fan_always_on = 0
- fan_below_layer_time = 60
- filament_colour = #29B2B2
- filament_cooling_final_speed = 3.4
- filament_cooling_initial_speed = 2.2
- filament_cooling_moves = 4
- filament_cost = 20
- filament_density = 1.24
- filament_deretract_speed = nil
- filament_diameter = 1.75
- filament_load_time = 0
- filament_loading_speed = 28
- filament_loading_speed_start = 3
- filament_max_volumetric_speed = 0
- filament_minimal_purge_on_wipe_tower = 15
- filament_notes = ""
- filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
- filament_retract_before_travel = nil
- filament_retract_before_wipe = nil
- filament_retract_layer_change = nil
- filament_retract_length = nil
- filament_retract_lift = nil
- filament_retract_lift_above = nil
- filament_retract_lift_below = nil
- filament_retract_restart_extra = nil
- filament_retract_speed = nil
- filament_settings_id = ""
- filament_soluble = 0
- filament_spool_weight = 0
- filament_toolchange_delay = 0
- filament_type = PLA
- filament_unload_time = 0
- filament_unloading_speed = 90
- filament_unloading_speed_start = 100
- filament_vendor = (Unknown)
- filament_wipe = nil
- first_layer_bed_temperature = 40
- first_layer_temperature = 200
- full_fan_speed_layer = 0
- inherits =
- max_fan_speed = 100
- min_fan_speed = 35
- min_print_speed = 10
- slowdown_below_layer_time = 5
- start_filament_gcode = "; Filament gcode\n"
- temperature = 200
-
- [filament:CTC i3 Pro B TPE]
- bed_temperature = 45
- bridge_fan_speed = 100
- compatible_printers = "CTC i3 Pro B"
- compatible_printers_condition =
- compatible_prints = "CTC i3 Pro B";"CTC i3 Pro B 0.5mm Nozzle"
- compatible_prints_condition =
- cooling = 0
- disable_fan_first_layers = 3
- end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
- extrusion_multiplier = 1
- fan_always_on = 0
- fan_below_layer_time = 60
- filament_colour = #29B2B2
- filament_cooling_final_speed = 3.4
- filament_cooling_initial_speed = 2.2
- filament_cooling_moves = 4
- filament_cost = 0
- filament_density = 0
- filament_deretract_speed = nil
- filament_diameter = 1.75
- filament_load_time = 0
- filament_loading_speed = 28
- filament_loading_speed_start = 3
- filament_max_volumetric_speed = 0
- filament_minimal_purge_on_wipe_tower = 15
- filament_notes = ""
- filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
- filament_retract_before_travel = nil
- filament_retract_before_wipe = nil
- filament_retract_layer_change = nil
- filament_retract_length = nil
- filament_retract_lift = nil
- filament_retract_lift_above = nil
- filament_retract_lift_below = nil
- filament_retract_restart_extra = nil
- filament_retract_speed = nil
- filament_settings_id = ""
- filament_soluble = 0
- filament_spool_weight = 0
- filament_toolchange_delay = 0
- filament_type = FLEX
- filament_unload_time = 0
- filament_unloading_speed = 90
- filament_unloading_speed_start = 100
- filament_vendor = (Unknown)
- filament_wipe = nil
- first_layer_bed_temperature = 45
- first_layer_temperature = 220
- full_fan_speed_layer = 0
- inherits =
- max_fan_speed = 100
- min_fan_speed = 35
- min_print_speed = 10
- slowdown_below_layer_time = 5
- start_filament_gcode = "; Filament gcode\n"
- temperature = 220
-
- [filament:Ender-3 PETG]
- bed_temperature = 70
- bridge_fan_speed = 100
- compatible_printers = Ender-3
- compatible_printers_condition =
- compatible_prints = "Ender-3 PLA Large";"Ender-3 PLA Mid";"Ender-3 PLA Small"
- compatible_prints_condition =
- cooling = 1
- disable_fan_first_layers = 3
- end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
- extrusion_multiplier = 1
- fan_always_on = 0
- fan_below_layer_time = 60
- filament_colour = #29B2B2
- filament_cooling_final_speed = 3.4
- filament_cooling_initial_speed = 2.2
- filament_cooling_moves = 4
- filament_cost = 0
- filament_density = 0
- filament_deretract_speed = nil
- filament_diameter = 1.75
- filament_load_time = 0
- filament_loading_speed = 28
- filament_loading_speed_start = 3
- filament_max_volumetric_speed = 0
- filament_minimal_purge_on_wipe_tower = 15
- filament_notes = ""
- filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
- filament_retract_before_travel = nil
- filament_retract_before_wipe = nil
- filament_retract_layer_change = nil
- filament_retract_length = nil
- filament_retract_lift = nil
- filament_retract_lift_above = nil
- filament_retract_lift_below = nil
- filament_retract_restart_extra = nil
- filament_retract_speed = 25
- filament_settings_id = ""
- filament_soluble = 0
- filament_spool_weight = 0
- filament_toolchange_delay = 0
- filament_type = PET
- filament_unload_time = 0
- filament_unloading_speed = 90
- filament_unloading_speed_start = 100
- filament_vendor = (Unknown)
- filament_wipe = nil
- first_layer_bed_temperature = 70
- first_layer_temperature = 220
- full_fan_speed_layer = 0
- inherits =
- max_fan_speed = 100
- min_fan_speed = 35
- min_print_speed = 10
- slowdown_below_layer_time = 5
- start_filament_gcode = "; Filament gcode\n"
- temperature = 220
-
- [filament:Ender-3 PLA]
- bed_temperature = 60
- bridge_fan_speed = 100
- compatible_printers = Ender-3
- compatible_printers_condition =
- compatible_prints = "Ender-3 PLA Large";"Ender-3 PLA Mid";"Ender-3 PLA Small"
- compatible_prints_condition =
- cooling = 1
- disable_fan_first_layers = 3
- end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
- extrusion_multiplier = 1
- fan_always_on = 0
- fan_below_layer_time = 60
- filament_colour = #29B2B2
- filament_cooling_final_speed = 3.4
- filament_cooling_initial_speed = 2.2
- filament_cooling_moves = 4
- filament_cost = 0
- filament_density = 0
- filament_deretract_speed = nil
- filament_diameter = 1.75
- filament_load_time = 0
- filament_loading_speed = 28
- filament_loading_speed_start = 3
- filament_max_volumetric_speed = 0
- filament_minimal_purge_on_wipe_tower = 15
- filament_notes = ""
- filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
- filament_retract_before_travel = nil
- filament_retract_before_wipe = nil
- filament_retract_layer_change = nil
- filament_retract_length = nil
- filament_retract_lift = nil
- filament_retract_lift_above = nil
- filament_retract_lift_below = nil
- filament_retract_restart_extra = nil
- filament_retract_speed = nil
- filament_settings_id = ""
- filament_soluble = 0
- filament_spool_weight = 0
- filament_toolchange_delay = 0
- filament_type = PLA
- filament_unload_time = 0
- filament_unloading_speed = 90
- filament_unloading_speed_start = 100
- filament_vendor = (Unknown)
- filament_wipe = nil
- first_layer_bed_temperature = 60
- first_layer_temperature = 200
- full_fan_speed_layer = 0
- inherits =
- max_fan_speed = 100
- min_fan_speed = 35
- min_print_speed = 10
- slowdown_below_layer_time = 5
- start_filament_gcode = "; Filament gcode\n"
- temperature = 200
-
- [filament:Fabrikator Mini]
- bed_temperature = 65
- bridge_fan_speed = 100
- compatible_printers = "Fabrikator Mini"
- compatible_printers_condition =
- compatible_prints = "Fabrikator Mini"
- compatible_prints_condition =
- cooling = 1
- disable_fan_first_layers = 3
- end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
- extrusion_multiplier = 1
- fan_always_on = 0
- fan_below_layer_time = 60
- filament_colour = #29B2B2
- filament_cooling_final_speed = 3.4
- filament_cooling_initial_speed = 2.2
- filament_cooling_moves = 4
- filament_cost = 17.5
- filament_density = 0
- filament_deretract_speed = nil
- filament_diameter = 1.75
- filament_load_time = 0
- filament_loading_speed = 28
- filament_loading_speed_start = 3
- filament_max_volumetric_speed = 0
- filament_minimal_purge_on_wipe_tower = 15
- filament_notes = ""
- filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
- filament_retract_before_travel = nil
- filament_retract_before_wipe = nil
- filament_retract_layer_change = nil
- filament_retract_length = nil
- filament_retract_lift = nil
- filament_retract_lift_above = nil
- filament_retract_lift_below = nil
- filament_retract_restart_extra = nil
- filament_retract_speed = nil
- filament_settings_id = ""
- filament_soluble = 0
- filament_spool_weight = 0
- filament_toolchange_delay = 0
- filament_type = PLA
- filament_unload_time = 0
- filament_unloading_speed = 90
- filament_unloading_speed_start = 100
- filament_vendor = (Unknown)
- filament_wipe = nil
- first_layer_bed_temperature = 65
- first_layer_temperature = 190
- full_fan_speed_layer = 0
- inherits =
- max_fan_speed = 100
- min_fan_speed = 35
- min_print_speed = 5
- slowdown_below_layer_time = 15
- start_filament_gcode = "; Filament gcode\n"
- temperature = 190
-
- [filament:i3 AM8 PETG]
- bed_temperature = 60
- bridge_fan_speed = 100
- compatible_printers =
- compatible_printers_condition =
- compatible_prints =
- compatible_prints_condition =
- cooling = 1
- disable_fan_first_layers = 3
- end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
- extrusion_multiplier = 1
- fan_always_on = 0
- fan_below_layer_time = 60
- filament_colour = #29B2B2
- filament_cooling_final_speed = 3.4
- filament_cooling_initial_speed = 2.2
- filament_cooling_moves = 4
- filament_cost = 20
- filament_density = 1.27
- filament_deretract_speed = nil
- filament_diameter = 1.75
- filament_load_time = 0
- filament_loading_speed = 28
- filament_loading_speed_start = 3
- filament_max_volumetric_speed = 0
- filament_minimal_purge_on_wipe_tower = 15
- filament_notes = ""
- filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
- filament_retract_before_travel = nil
- filament_retract_before_wipe = nil
- filament_retract_layer_change = nil
- filament_retract_length = nil
- filament_retract_lift = nil
- filament_retract_lift_above = nil
- filament_retract_lift_below = nil
- filament_retract_restart_extra = nil
- filament_retract_speed = nil
- filament_settings_id = ""
- filament_soluble = 0
- filament_spool_weight = 0
- filament_toolchange_delay = 0
- filament_type = PET
- filament_unload_time = 0
- filament_unloading_speed = 90
- filament_unloading_speed_start = 100
- filament_vendor = (Unknown)
- filament_wipe = nil
- first_layer_bed_temperature = 60
- first_layer_temperature = 230
- full_fan_speed_layer = 0
- inherits =
- max_fan_speed = 100
- min_fan_speed = 35
- min_print_speed = 10
- slowdown_below_layer_time = 5
- start_filament_gcode = "; Filament gcode\n"
- temperature = 230
-
- [filament:i3 AM8 PLA]
- bed_temperature = 50
- bridge_fan_speed = 100
- compatible_printers =
- compatible_printers_condition =
- compatible_prints =
- compatible_prints_condition =
- cooling = 1
- disable_fan_first_layers = 3
- end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
- extrusion_multiplier = 1
- fan_always_on = 0
- fan_below_layer_time = 60
- filament_colour = #29B2B2
- filament_cooling_final_speed = 3.4
- filament_cooling_initial_speed = 2.2
- filament_cooling_moves = 4
- filament_cost = 20
- filament_density = 1.24
- filament_deretract_speed = nil
- filament_diameter = 1.75
- filament_load_time = 0
- filament_loading_speed = 28
- filament_loading_speed_start = 3
- filament_max_volumetric_speed = 0
- filament_minimal_purge_on_wipe_tower = 15
- filament_notes = ""
- filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
- filament_retract_before_travel = nil
- filament_retract_before_wipe = nil
- filament_retract_layer_change = nil
- filament_retract_length = nil
- filament_retract_lift = nil
- filament_retract_lift_above = nil
- filament_retract_lift_below = nil
- filament_retract_restart_extra = nil
- filament_retract_speed = nil
- filament_settings_id = ""
- filament_soluble = 0
- filament_spool_weight = 0
- filament_toolchange_delay = 0
- filament_type = PLA
- filament_unload_time = 0
- filament_unloading_speed = 90
- filament_unloading_speed_start = 100
- filament_vendor = (Unknown)
- filament_wipe = nil
- first_layer_bed_temperature = 50
- first_layer_temperature = 200
- full_fan_speed_layer = 0
- inherits =
- max_fan_speed = 100
- min_fan_speed = 35
- min_print_speed = 10
- slowdown_below_layer_time = 5
- start_filament_gcode = "; Filament gcode\n"
- temperature = 200
-
- [sla_print:0.1 Fast - Copy]
- compatible_printers =
- compatible_printers_condition = printer_model=="SL1"
- default_sla_print_profile =
- faded_layers = 10
- hollowing_closing_distance = 2
- hollowing_enable = 0
- hollowing_min_thickness = 3
- hollowing_quality = 0.5
- inherits = 0.1 Fast
- layer_height = 0.1
- output_filename_format = [input_filename_base].sl1
- pad_around_object = 0
- pad_around_object_everywhere = 0
- pad_brim_size = 1.6
- pad_enable = 1
- pad_max_merge_distance = 50
- pad_object_connector_penetration = 0.3
- pad_object_connector_stride = 10
- pad_object_connector_width = 0.5
- pad_object_gap = 1
- pad_wall_height = 0
- pad_wall_slope = 45
- pad_wall_thickness = 0.5
- sla_print_settings_id =
- slice_closing_radius = 0.005
- slicing_mode = regular
- support_base_diameter = 3
- support_base_height = 1
- support_base_safety_distance = 1
- support_buildplate_only = 0
- support_critical_angle = 45
- support_head_front_diameter = 0.5
- support_head_penetration = 0.5
- support_head_width = 3
- support_max_bridge_length = 10
- support_max_bridges_on_pillar = 3
- support_max_pillar_link_distance = 10
- support_object_elevation = 5
- support_pillar_connection_mode = zigzag
- support_pillar_diameter = 1.3
- support_pillar_widening_factor = 0
- support_points_density_relative = 100
- support_points_minimal_distance = 1
- support_small_pillar_diameter_percent = 60%
- supports_enable = 1
-
- [sla_material:Anycubic Grey]
- bottle_cost = 0
- bottle_volume = 1000
- bottle_weight = 1
- compatible_printers =
- compatible_printers_condition = printer_model=="SL1"
- compatible_prints =
- compatible_prints_condition = layer_height == 0.05
- default_sla_material_profile =
- exposure_time = 15
- inherits = Prusa Orange Tough @0.05
- initial_exposure_time = 120
- initial_layer_height = 0.1
- material_colour = #FF8040
- material_correction = 1,1,1
- material_correction_x = 1
- material_correction_y = 1
- material_correction_z = 1
- material_density = 1
- material_notes =
- material_print_speed = fast
- material_type = Tough
- material_vendor = Made for Prusa
- sla_material_settings_id =
-
- [sla_material:Prusa Orange Tough @0.1 - Copy]
- bottle_cost = 0
- bottle_volume = 1000
- bottle_weight = 1
- compatible_printers =
- compatible_printers_condition = printer_model=="SL1"
- compatible_prints =
- compatible_prints_condition = layer_height == 0.1
- default_sla_material_profile =
- exposure_time = 15
- inherits = Prusa Orange Tough @0.1
- initial_exposure_time = 120
- initial_layer_height = 0.1
- material_colour = #FF8040
- material_correction = 1,1,1
- material_correction_x = 1
- material_correction_y = 1
- material_correction_z = 1
- material_density = 1
- material_notes =
- material_print_speed = fast
- material_type = Tough
- material_vendor = Made for Prusa
- sla_material_settings_id =
-
- [printer:CTC i3 Pro B]
- bed_custom_model =
- bed_custom_texture =
- bed_shape = 0x0,195x0,195x183,0x183
- before_layer_gcode =
- between_objects_gcode =
- color_change_gcode = M600
- cooling_tube_length = 5
- cooling_tube_retraction = 91.5
- default_filament_profile = ""
- default_print_profile =
- deretract_speed = 0
- end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off bed\n\nG91 ; relative positioning\nG1 E-2.5 F40 ; retract some filament\nG1 Z+2.0 E-2.0 F{travel_speed * 60} ; move z up and retract more\n\nG90 ; absolute positioning\nG0 X0 Y180 ; move out of the way\nM84 ; disable motors\nM117 Finished!\n
- extra_loading_move = -2
- extruder_colour = ""
- extruder_offset = 0x0
- gcode_flavor = marlin
- high_current_on_filament_swap = 0
- host_type = octoprint
- inherits =
- layer_gcode =
- machine_limits_usage = emit_to_gcode
- machine_max_acceleration_e = 600,5000
- machine_max_acceleration_extruding = 500,1250
- machine_max_acceleration_retracting = 500,1250
- machine_max_acceleration_travel = 1500,1250
- machine_max_acceleration_x = 1000,1000
- machine_max_acceleration_y = 1000,1000
- machine_max_acceleration_z = 100,200
- machine_max_feedrate_e = 120,120
- machine_max_feedrate_x = 150,200
- machine_max_feedrate_y = 150,200
- machine_max_feedrate_z = 12,12
- machine_max_jerk_e = 2.5,2.5
- machine_max_jerk_x = 10,10
- machine_max_jerk_y = 10,10
- machine_max_jerk_z = 0.2,0.4
- machine_min_extruding_rate = 0,0
- machine_min_travel_rate = 0,0
- max_layer_height = 0.3
- max_print_height = 192
- min_layer_height = 0.07
- nozzle_diameter = 0.5
- parking_pos_retraction = 92
- pause_print_gcode = M601
- print_host =
- printer_model =
- printer_notes =
- printer_settings_id =
- printer_technology = FFF
- printer_variant =
- printer_vendor =
- printhost_apikey =
- printhost_cafile =
- remaining_times = 0
- retract_before_travel = 2
- retract_before_wipe = 0%
- retract_layer_change = 0
- retract_length = 2.5
- retract_length_toolchange = 10
- retract_lift = 0
- retract_lift_above = 0
- retract_lift_below = 0
- retract_restart_extra = 0
- retract_restart_extra_toolchange = 0
- retract_speed = 25
- silent_mode = 0
- single_extruder_multi_material = 0
- start_gcode = M140 S42 ; start heating bed\n\nG21 ; metric\nG90 ; absolute positioning\nM82 ; extruder absolute\nM107 ; fan off\nG28 ; home all axes\n;G0 Z25 F{travel_speed * 60} ; lift nozzle\n;G0 X10 Y-5 F{travel_speed * 60} ; move to xy origin\n\nM190 S35 ; wait for heating bed\nM140 S[first_layer_bed_temperature] ; start heating bed\nM104 S[first_layer_temperature] ; start heating extruder\n\n;G29 ; perform auto bed leveling\n;G0 Z25 F{travel_speed * 60} ; lift nozzle\n;G0 X10 Y-5 F{travel_speed * 60} ; move to xy origin\n\nM190 S[first_layer_bed_temperature] ; wait for heating bed\nM109 S[first_layer_temperature] ; wait for heating extruder\n\n;G0 Z1 F{travel_speed * 60} ; lift nozzle\n;G0 X10 Y-5 F{travel_speed * 60} ; move to xy origin\n\n;G0 Z0.1 F{travel_speed * 60} ; move z down\n;G92 E0 ; zero extruder\n;G1 X60 E9 F600 ; start purge line\n;G1 X100 E12.5 F600 ; finish purge line\n;G1 X120 E9.0 F600 ; retract\n\nG92 E0 ; zero extruder\nG0 Z5 F{travel_speed * 60} ; lift nozzle\n\n;G0 X97 Y91 ; move to center\nM117 Printing...\n
- template_custom_gcode =
- thumbnails =
- thumbnails_format = PNG
- toolchange_gcode =
- use_firmware_retraction = 0
- use_relative_e_distances = 0
- use_volumetric_e = 0
- variable_layer_height = 1
- wipe = 0
- z_offset = 0
-
- [printer:Ender-3]
- bed_custom_model =
- bed_custom_texture =
- bed_shape = 0x0,235x0,235x235,0x235
- before_layer_gcode =
- between_objects_gcode =
- color_change_gcode = M600
- cooling_tube_length = 5
- cooling_tube_retraction = 91.5
- default_filament_profile = ""
- default_print_profile =
- deretract_speed = 0
- end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nG91 ; relative positioning\nG1 E-0.5 F40 ; retract some filament\nG1 Z+2.0 E-0.5 F{travel_speed * 60} ; move z up and retract more\nG90 ; absolute positioning\nG0 X0 Y230 ; move out of the way\nM84 ; disable motors\nM117 Finished!\n
- extra_loading_move = -2
- extruder_colour = ""
- extruder_offset = 0x0
- gcode_flavor = marlin
- high_current_on_filament_swap = 0
- host_type = octoprint
- inherits =
- layer_gcode =
- machine_limits_usage = emit_to_gcode
- machine_max_acceleration_e = 10000,5000
- machine_max_acceleration_extruding = 1500,1250
- machine_max_acceleration_retracting = 1500,1250
- machine_max_acceleration_travel = 1500,1250
- machine_max_acceleration_x = 9000,1000
- machine_max_acceleration_y = 9000,1000
- machine_max_acceleration_z = 500,200
- machine_max_feedrate_e = 120,120
- machine_max_feedrate_x = 500,200
- machine_max_feedrate_y = 500,200
- machine_max_feedrate_z = 12,12
- machine_max_jerk_e = 2.5,2.5
- machine_max_jerk_x = 10,10
- machine_max_jerk_y = 10,10
- machine_max_jerk_z = 0.2,0.4
- machine_min_extruding_rate = 0,0
- machine_min_travel_rate = 0,0
- max_layer_height = 0
- max_print_height = 200
- min_layer_height = 0.07
- nozzle_diameter = 0.4
- parking_pos_retraction = 92
- pause_print_gcode = M601
- print_host =
- printer_model =
- printer_notes =
- printer_settings_id =
- printer_technology = FFF
- printer_variant =
- printer_vendor =
- printhost_apikey =
- printhost_cafile =
- remaining_times = 0
- retract_before_travel = 2
- retract_before_wipe = 0%
- retract_layer_change = 0
- retract_length = 5
- retract_length_toolchange = 10
- retract_lift = 0
- retract_lift_above = 0
- retract_lift_below = 0
- retract_restart_extra = 0
- retract_restart_extra_toolchange = 0
- retract_speed = 40
- silent_mode = 0
- single_extruder_multi_material = 0
- start_gcode = M140 S[first_layer_bed_temperature] ; start heating bed\nG21 ; metric\nG90 ; absolute positioning\nM82 ; extruder absolute\nM107 ; fan off\nG28 ; home all axes\nM104 S[first_layer_temperature] ; start heating extruder\nG0 Z10 F{travel_speed * 60} ; lift nozzle\nG0 X20 Y40 F{travel_speed * 60} ; move to xy origin\nM190 S[first_layer_bed_temperature] ; wait for heating bed\nM109 S[first_layer_temperature] ; wait for heating extruder\nG0 X30 Z0.1 F{travel_speed * 60} ; move z down\nG92 E0 ; zero extruder\nG1 X80 E9 F600 ; start purge line\nG1 X120 E12.5 F600 ; finish purge line\nG1 X140 E-2 F600 ; retract\nG92 E0 ; zero extruder\nG0 Z10 F{travel_speed * 60} ; lift nozzle\nG0 X115 Y115 F{travel_speed * 60} ; move to center\nM117 Printing...\n
- template_custom_gcode =
- thumbnails =
- thumbnails_format = PNG
- toolchange_gcode =
- use_firmware_retraction = 0
- use_relative_e_distances = 0
- use_volumetric_e = 0
- variable_layer_height = 1
- wipe = 0
- z_offset = 0
-
- [printer:Fabrikator Mini]
- bed_custom_model =
- bed_custom_texture =
- bed_shape = 0x0,80x0,80x80,0x80
- before_layer_gcode =
- between_objects_gcode =
- color_change_gcode = M600
- cooling_tube_length = 5
- cooling_tube_retraction = 91.5
- default_filament_profile = ""
- default_print_profile =
- deretract_speed = 0
- end_gcode = M104 S0 ; extruder heater off\nM140 S0 ; heated bed heater off (if you have it)\nG91 ; relative positioning\nG1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 F{travel_speed * 60} ; move Z up a bit and retract filament even more\nG90 ; absolute positioning\nG1 X0 Y0 ; move x/y without homing to keep leveling on\nM84 ; turn off stepper motors
- extra_loading_move = -2
- extruder_colour = ""
- extruder_offset = 0x0
- gcode_flavor = marlin
- high_current_on_filament_swap = 0
- host_type = octoprint
- inherits =
- layer_gcode =
- machine_limits_usage = emit_to_gcode
- machine_max_acceleration_e = 200,5000
- machine_max_acceleration_extruding = 200,1250
- machine_max_acceleration_retracting = 200,1250
- machine_max_acceleration_travel = 1500,1250
- machine_max_acceleration_x = 150,1000
- machine_max_acceleration_y = 150,1000
- machine_max_acceleration_z = 40,200
- machine_max_feedrate_e = 40,120
- machine_max_feedrate_x = 40,200
- machine_max_feedrate_y = 40,200
- machine_max_feedrate_z = 2,12
- machine_max_jerk_e = 2.5,2.5
- machine_max_jerk_x = 10,10
- machine_max_jerk_y = 10,10
- machine_max_jerk_z = 0.2,0.4
- machine_min_extruding_rate = 0,0
- machine_min_travel_rate = 0,0
- max_layer_height = 0
- max_print_height = 80
- min_layer_height = 0.07
- nozzle_diameter = 0.4
- parking_pos_retraction = 92
- pause_print_gcode = M601
- print_host =
- printer_model =
- printer_notes =
- printer_settings_id =
- printer_technology = FFF
- printer_variant =
- printer_vendor =
- printhost_apikey =
- printhost_cafile =
- remaining_times = 0
- retract_before_travel = 2
- retract_before_wipe = 0%
- retract_layer_change = 0
- retract_length = 2
- retract_length_toolchange = 10
- retract_lift = 0
- retract_lift_above = 0
- retract_lift_below = 0
- retract_restart_extra = 0
- retract_restart_extra_toolchange = 0
- retract_speed = 40
- silent_mode = 0
- single_extruder_multi_material = 0
- start_gcode = G21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM107 ; start with the fan off\nM104 S[first_layer_temperature] ; begin heating nozzle\nM140 S[first_layer_bed_temperature] ; begin heating bed\nG28 ; home all axes, needed for mesh leveling!\nM420 S1 ; enable mesh bed leveling\nG1 Z10.0 F{travel_speed * 60} ; move the platform down 10mm\nG1 X40 Y40 F{travel_speed * 60} ; move to center to avoid tape edge\nM190 S[first_layer_bed_temperature] ; Wait for bed temp\nM109 S[first_layer_temperature] ; Wait for nozzle temp\nG92 E0 ; zero the extruded length\nG1 F200 E1 ; extrude 1mm of feed stock\nG92 E0 ; zero the extruded length again\nG1 F{travel_speed * 60} ; set default travel speed\n; Put printing message on LCD screen\nM117 Printing...
- template_custom_gcode =
- thumbnails =
- thumbnails_format = PNG
- toolchange_gcode =
- use_firmware_retraction = 0
- use_relative_e_distances = 0
- use_volumetric_e = 0
- variable_layer_height = 1
- wipe = 0
- z_offset = -0.2
-
- [printer:Sparkmaker]
- absolute_correction = 0
- area_fill = 50
- bed_custom_model =
- bed_custom_texture =
- bed_shape = 0x0,99.8169x0,99.8169x56.103,0x56.103
- default_sla_material_profile = Prusa Orange Tough @0.05
- default_sla_print_profile = 0.05 Normal
- display_height = 56.103
- display_mirror_x = 0
- display_mirror_y = 0
- display_orientation = landscape
- display_pixels_x = 854
- display_pixels_y = 480
- display_width = 99.8169
- elefant_foot_compensation = 0
- elefant_foot_min_width = 0.2
- fast_tilt_time = 5
- gamma_correction = 1
- high_viscosity_tilt_time = 10
- host_type = octoprint
- inherits = Original Prusa SL1
- max_exposure_time = 150
- max_initial_exposure_time = 300
- max_print_height = 120
- min_exposure_time = 1
- min_initial_exposure_time = 1
- print_host =
- printer_model = SL1
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n
- printer_settings_id =
- printer_technology = SLA
- printer_variant = default
- printer_vendor =
- printhost_apikey =
- printhost_cafile =
- relative_correction = 1,1
- relative_correction_x = 1
- relative_correction_y = 1
- relative_correction_z = 1
- slow_tilt_time = 8
- thumbnails = 400x400,800x480
-
- [printer:i3 AM8]
- bed_custom_model =
- bed_custom_texture =
- bed_shape = 0x0,220x0,220x210,0x210
- before_layer_gcode =
- between_objects_gcode =
- color_change_gcode = M600
- cooling_tube_length = 5
- cooling_tube_retraction = 91.5
- default_filament_profile =
- default_print_profile =
- deretract_speed = 0
- end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off bed\n\nG91 ; relative positioning\nG1 E-4.0 F40 ; retract some filament\nG1 Z+2.0 E-6.0 F{travel_speed * 60} ; move z up and retract more\n\nG90 ; absolute positioning\nG0 X-5 Y200 ; move out of the way\nM84 ; disable motors\nM117 Finished!\n
- extra_loading_move = -2
- extruder_colour = ""
- extruder_offset = 0x0
- gcode_flavor = marlin
- high_current_on_filament_swap = 0
- host_type = octoprint
- inherits =
- layer_gcode =
- machine_limits_usage = time_estimate_only
- machine_max_acceleration_e = 10000,5000
- machine_max_acceleration_extruding = 1500,1250
- machine_max_acceleration_retracting = 1500,1250
- machine_max_acceleration_travel = 1500,1250
- machine_max_acceleration_x = 2000,1000
- machine_max_acceleration_y = 2000,1000
- machine_max_acceleration_z = 500,200
- machine_max_feedrate_e = 120,120
- machine_max_feedrate_x = 175,100
- machine_max_feedrate_y = 175,100
- machine_max_feedrate_z = 175,100
- machine_max_jerk_e = 2.5,2.5
- machine_max_jerk_x = 10,10
- machine_max_jerk_y = 10,10
- machine_max_jerk_z = 0.2,0.4
- machine_min_extruding_rate = 0,0
- machine_min_travel_rate = 0,0
- max_layer_height = 0
- max_print_height = 275
- min_layer_height = 0.07
- nozzle_diameter = 0.4
- parking_pos_retraction = 92
- pause_print_gcode = M601
- print_host =
- printer_model =
- printer_notes =
- printer_settings_id =
- printer_technology = FFF
- printer_variant =
- printer_vendor =
- printhost_apikey =
- printhost_cafile =
- remaining_times = 0
- retract_before_travel = 2
- retract_before_wipe = 0%
- retract_layer_change = 0
- retract_length = 2
- retract_length_toolchange = 10
- retract_lift = 0
- retract_lift_above = 0
- retract_lift_below = 0
- retract_restart_extra = 0
- retract_restart_extra_toolchange = 0
- retract_speed = 40
- silent_mode = 1
- single_extruder_multi_material = 0
- start_gcode = ; Pre-Heat Bed\n;M140 S35 ; start heating bed\n;M140 S[first_layer_bed_temperature] ; start heating bed\n\n; Initial Settings\nG21 ; metric\nG90 ; absolute positioning\nM82 ; extruder absolute\nM107 ; fan off\n\n; Homing\n;G28 ; home all axes\n;G0 Z25 F{travel_speed * 60} ; lift nozzle\n;G0 X-5 Y0 F{travel_speed * 60} ; move to xy origin\n\n; Bed Leveling\nG29 ; perform auto bed leveling\nG0 Z25 F{travel_speed * 60} ; lift nozzle\nG0 X-5 Y0 F{travel_speed * 60} ; move to xy origin\n\n; Heating Extruder and Bed\n;M190 S35 ; wait for heating bed\nM140 S[first_layer_bed_temperature] ; start heating bed\nM104 S[first_layer_temperature] ; start heating extruder\nM190 S[first_layer_bed_temperature] ; wait for heating bed\nM109 S[first_layer_temperature] ; wait for heating extruder\n\n; Priming Line\n;G0 Z0.5 F{travel_speed * 60} ; move down nozzle\n;G0 X5 Y3 F{travel_speed * 60} ; move to start of line\n;G0 Z0.1 F{travel_speed * 60} ; move z down\n;G92 E0 ; zero extruder\n;G1 X60 E12.5 F600 ; start purge line\n;G1 X100 E15.0 F600 ; finish purge line\n;G1 X120 E12.5 F600 ; retract\nG92 E0 ; zero extruder\n;G0 Z5 F{travel_speed * 60} ; lift nozzle\n;G0 X100 Y100 ; move to center\nM117 Printing...\n
- template_custom_gcode =
- thumbnails =
- thumbnails_format = PNG
- toolchange_gcode =
- use_firmware_retraction = 0
- use_relative_e_distances = 0
- use_volumetric_e = 0
- variable_layer_height = 1
- wipe = 0
- z_offset = 0
-
- [presets]
- print = i3 AM8
- sla_print = 0.1 Fast - Copy
- sla_material = Prusa Orange Tough @0.1 - Copy
- printer = Sparkmaker
- filament = i3 AM8 PETG
|