My static website generator using poole https://www.xythobuz.de
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

PrusaSlicer_config_bundle.ini 60KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024
  1. # generated by PrusaSlicer 2.5.0 on 2023-01-03 at 11:15:09 UTC
  2. [print:CTC i3 Pro B]
  3. avoid_crossing_perimeters = 1
  4. avoid_crossing_perimeters_max_detour = 50
  5. bottom_fill_pattern = rectilinear
  6. bottom_solid_layers = 4
  7. bottom_solid_min_thickness = 0.6
  8. bridge_acceleration = 0
  9. bridge_angle = 0
  10. bridge_flow_ratio = 1
  11. bridge_speed = 60
  12. brim_separation = 0
  13. brim_type = outer_only
  14. brim_width = 0
  15. clip_multipart_objects = 0
  16. compatible_printers = "CTC i3 Pro B";"CTC i3 Pro B PETG"
  17. compatible_printers_condition =
  18. complete_objects = 0
  19. default_acceleration = 0
  20. dont_support_bridges = 1
  21. draft_shield = disabled
  22. elefant_foot_compensation = 0
  23. ensure_vertical_shell_thickness = 1
  24. external_perimeter_extrusion_width = 0.45
  25. external_perimeter_speed = 50%
  26. external_perimeters_first = 0
  27. extra_perimeters = 1
  28. extruder_clearance_height = 20
  29. extruder_clearance_radius = 20
  30. extrusion_width = 0.45
  31. fill_angle = 45
  32. fill_density = 20%
  33. fill_pattern = honeycomb
  34. first_layer_acceleration = 0
  35. first_layer_acceleration_over_raft = 0
  36. first_layer_extrusion_width = 0.42
  37. first_layer_height = 0.1
  38. first_layer_speed = 30
  39. first_layer_speed_over_raft = 30
  40. fuzzy_skin = none
  41. fuzzy_skin_point_dist = 0.8
  42. fuzzy_skin_thickness = 0.3
  43. gap_fill_enabled = 1
  44. gap_fill_speed = 20
  45. gcode_comments = 0
  46. gcode_label_objects = 0
  47. gcode_resolution = 0.0125
  48. gcode_substitutions =
  49. infill_acceleration = 0
  50. infill_anchor = 600%
  51. infill_anchor_max = 50
  52. infill_every_layers = 1
  53. infill_extruder = 1
  54. infill_extrusion_width = 0.45
  55. infill_first = 0
  56. infill_only_where_needed = 0
  57. infill_overlap = 25%
  58. infill_speed = 80
  59. inherits =
  60. interface_shells = 0
  61. ironing = 0
  62. ironing_flowrate = 15%
  63. ironing_spacing = 0.1
  64. ironing_speed = 15
  65. ironing_type = top
  66. layer_height = 0.2
  67. max_print_speed = 80
  68. max_volumetric_extrusion_rate_slope_negative = 0
  69. max_volumetric_extrusion_rate_slope_positive = 0
  70. max_volumetric_speed = 0
  71. min_bead_width = 85%
  72. min_feature_size = 25%
  73. min_skirt_length = 30
  74. mmu_segmented_region_max_width = 0
  75. notes =
  76. only_retract_when_crossing_perimeters = 1
  77. ooze_prevention = 0
  78. output_filename_format = [input_filename_base].gcode
  79. overhangs = 1
  80. perimeter_acceleration = 0
  81. perimeter_extruder = 1
  82. perimeter_extrusion_width = 0.45
  83. perimeter_generator = arachne
  84. perimeter_speed = 60
  85. perimeters = 4
  86. post_process =
  87. print_settings_id =
  88. raft_contact_distance = 0.1
  89. raft_expansion = 1.5
  90. raft_first_layer_density = 90%
  91. raft_first_layer_expansion = 3
  92. raft_layers = 0
  93. resolution = 0
  94. seam_position = aligned
  95. single_extruder_multi_material_priming = 1
  96. skirt_distance = 6
  97. skirt_height = 1
  98. skirts = 1
  99. slice_closing_radius = 0.049
  100. slicing_mode = regular
  101. small_perimeter_speed = 15
  102. solid_infill_below_area = 70
  103. solid_infill_every_layers = 0
  104. solid_infill_extruder = 1
  105. solid_infill_extrusion_width = 0.45
  106. solid_infill_speed = 20
  107. spiral_vase = 0
  108. standby_temperature_delta = -5
  109. support_material = 0
  110. support_material_angle = 0
  111. support_material_auto = 1
  112. support_material_bottom_contact_distance = 0
  113. support_material_bottom_interface_layers = -1
  114. support_material_buildplate_only = 0
  115. support_material_closing_radius = 2
  116. support_material_contact_distance = 0.2
  117. support_material_enforce_layers = 0
  118. support_material_extruder = 1
  119. support_material_extrusion_width = 0.35
  120. support_material_interface_contact_loops = 0
  121. support_material_interface_extruder = 1
  122. support_material_interface_layers = 3
  123. support_material_interface_pattern = rectilinear
  124. support_material_interface_spacing = 0
  125. support_material_interface_speed = 100%
  126. support_material_pattern = rectilinear
  127. support_material_spacing = 2.5
  128. support_material_speed = 60
  129. support_material_style = grid
  130. support_material_synchronize_layers = 0
  131. support_material_threshold = 0
  132. support_material_with_sheath = 1
  133. support_material_xy_spacing = 50%
  134. thick_bridges = 1
  135. thin_walls = 1
  136. threads = 8
  137. top_fill_pattern = rectilinear
  138. top_infill_extrusion_width = 0.4
  139. top_solid_infill_speed = 15
  140. top_solid_layers = 4
  141. top_solid_min_thickness = 0.6
  142. travel_speed = 95
  143. travel_speed_z = 0
  144. wall_distribution_count = 1
  145. wall_transition_angle = 10
  146. wall_transition_filter_deviation = 25%
  147. wall_transition_length = 100%
  148. wipe_tower = 0
  149. wipe_tower_bridging = 10
  150. wipe_tower_brim_width = 2
  151. wipe_tower_no_sparse_layers = 0
  152. wipe_tower_rotation_angle = 0
  153. wipe_tower_width = 60
  154. wipe_tower_x = 180
  155. wipe_tower_y = 140
  156. xy_size_compensation = 0
  157. [print:CTC i3 Pro B 0.5mm Nozzle]
  158. avoid_crossing_perimeters = 1
  159. avoid_crossing_perimeters_max_detour = 50
  160. bottom_fill_pattern = rectilinear
  161. bottom_solid_layers = 4
  162. bottom_solid_min_thickness = 0.6
  163. bridge_acceleration = 0
  164. bridge_angle = 0
  165. bridge_flow_ratio = 1
  166. bridge_speed = 60
  167. brim_separation = 0
  168. brim_type = outer_only
  169. brim_width = 0
  170. clip_multipart_objects = 0
  171. compatible_printers = "CTC i3 Pro B";"CTC i3 Pro B PETG"
  172. compatible_printers_condition =
  173. complete_objects = 0
  174. default_acceleration = 0
  175. dont_support_bridges = 1
  176. draft_shield = disabled
  177. elefant_foot_compensation = 0.2
  178. ensure_vertical_shell_thickness = 1
  179. external_perimeter_extrusion_width = 0
  180. external_perimeter_speed = 50%
  181. external_perimeters_first = 0
  182. extra_perimeters = 1
  183. extruder_clearance_height = 20
  184. extruder_clearance_radius = 20
  185. extrusion_width = 0
  186. fill_angle = 45
  187. fill_density = 20%
  188. fill_pattern = honeycomb
  189. first_layer_acceleration = 0
  190. first_layer_acceleration_over_raft = 0
  191. first_layer_extrusion_width = 200%
  192. first_layer_height = 0.2
  193. first_layer_speed = 30
  194. first_layer_speed_over_raft = 30
  195. fuzzy_skin = none
  196. fuzzy_skin_point_dist = 0.8
  197. fuzzy_skin_thickness = 0.3
  198. gap_fill_enabled = 1
  199. gap_fill_speed = 20
  200. gcode_comments = 0
  201. gcode_label_objects = 0
  202. gcode_resolution = 0.0125
  203. gcode_substitutions =
  204. infill_acceleration = 0
  205. infill_anchor = 600%
  206. infill_anchor_max = 50
  207. infill_every_layers = 1
  208. infill_extruder = 1
  209. infill_extrusion_width = 0
  210. infill_first = 0
  211. infill_only_where_needed = 0
  212. infill_overlap = 25%
  213. infill_speed = 80
  214. inherits =
  215. interface_shells = 0
  216. ironing = 0
  217. ironing_flowrate = 15%
  218. ironing_spacing = 0.1
  219. ironing_speed = 15
  220. ironing_type = top
  221. layer_height = 0.3
  222. max_print_speed = 80
  223. max_volumetric_extrusion_rate_slope_negative = 0
  224. max_volumetric_extrusion_rate_slope_positive = 0
  225. max_volumetric_speed = 0
  226. min_bead_width = 85%
  227. min_feature_size = 25%
  228. min_skirt_length = 30
  229. mmu_segmented_region_max_width = 0
  230. notes =
  231. only_retract_when_crossing_perimeters = 1
  232. ooze_prevention = 0
  233. output_filename_format = [input_filename_base].gcode
  234. overhangs = 1
  235. perimeter_acceleration = 0
  236. perimeter_extruder = 1
  237. perimeter_extrusion_width = 0
  238. perimeter_generator = arachne
  239. perimeter_speed = 60
  240. perimeters = 4
  241. post_process =
  242. print_settings_id =
  243. raft_contact_distance = 0.1
  244. raft_expansion = 1.5
  245. raft_first_layer_density = 90%
  246. raft_first_layer_expansion = 3
  247. raft_layers = 0
  248. resolution = 0
  249. seam_position = aligned
  250. single_extruder_multi_material_priming = 1
  251. skirt_distance = 6
  252. skirt_height = 1
  253. skirts = 1
  254. slice_closing_radius = 0.049
  255. slicing_mode = regular
  256. small_perimeter_speed = 15
  257. solid_infill_below_area = 70
  258. solid_infill_every_layers = 0
  259. solid_infill_extruder = 1
  260. solid_infill_extrusion_width = 0
  261. solid_infill_speed = 20
  262. spiral_vase = 0
  263. standby_temperature_delta = -5
  264. support_material = 0
  265. support_material_angle = 0
  266. support_material_auto = 1
  267. support_material_bottom_contact_distance = 0
  268. support_material_bottom_interface_layers = -1
  269. support_material_buildplate_only = 0
  270. support_material_closing_radius = 2
  271. support_material_contact_distance = 0.2
  272. support_material_enforce_layers = 0
  273. support_material_extruder = 1
  274. support_material_extrusion_width = 0
  275. support_material_interface_contact_loops = 0
  276. support_material_interface_extruder = 1
  277. support_material_interface_layers = 3
  278. support_material_interface_pattern = rectilinear
  279. support_material_interface_spacing = 0
  280. support_material_interface_speed = 100%
  281. support_material_pattern = rectilinear
  282. support_material_spacing = 2.5
  283. support_material_speed = 60
  284. support_material_style = grid
  285. support_material_synchronize_layers = 0
  286. support_material_threshold = 0
  287. support_material_with_sheath = 1
  288. support_material_xy_spacing = 50%
  289. thick_bridges = 1
  290. thin_walls = 1
  291. threads = 8
  292. top_fill_pattern = rectilinear
  293. top_infill_extrusion_width = 0
  294. top_solid_infill_speed = 15
  295. top_solid_layers = 4
  296. top_solid_min_thickness = 0.6
  297. travel_speed = 95
  298. travel_speed_z = 0
  299. wall_distribution_count = 1
  300. wall_transition_angle = 10
  301. wall_transition_filter_deviation = 25%
  302. wall_transition_length = 100%
  303. wipe_tower = 0
  304. wipe_tower_bridging = 10
  305. wipe_tower_brim_width = 2
  306. wipe_tower_no_sparse_layers = 0
  307. wipe_tower_rotation_angle = 0
  308. wipe_tower_width = 60
  309. wipe_tower_x = 180
  310. wipe_tower_y = 140
  311. xy_size_compensation = 0
  312. [print:Ender-3 PLA Large]
  313. avoid_crossing_perimeters = 0
  314. avoid_crossing_perimeters_max_detour = 0
  315. bottom_fill_pattern = rectilinear
  316. bottom_solid_layers = 3
  317. bottom_solid_min_thickness = 0
  318. bridge_acceleration = 0
  319. bridge_angle = 0
  320. bridge_flow_ratio = 1
  321. bridge_speed = 60
  322. brim_separation = 0
  323. brim_type = outer_only
  324. brim_width = 0
  325. clip_multipart_objects = 0
  326. compatible_printers = Ender-3;"Ender-3 PETG"
  327. compatible_printers_condition =
  328. complete_objects = 0
  329. default_acceleration = 0
  330. dont_support_bridges = 1
  331. draft_shield = disabled
  332. elefant_foot_compensation = 0
  333. ensure_vertical_shell_thickness = 0
  334. external_perimeter_extrusion_width = 0.45
  335. external_perimeter_speed = 50%
  336. external_perimeters_first = 0
  337. extra_perimeters = 1
  338. extruder_clearance_height = 20
  339. extruder_clearance_radius = 20
  340. extrusion_width = 0.45
  341. fill_angle = 45
  342. fill_density = 20%
  343. fill_pattern = stars
  344. first_layer_acceleration = 0
  345. first_layer_acceleration_over_raft = 0
  346. first_layer_extrusion_width = 0.42
  347. first_layer_height = 0.1
  348. first_layer_speed = 30
  349. first_layer_speed_over_raft = 30
  350. fuzzy_skin = none
  351. fuzzy_skin_point_dist = 0.8
  352. fuzzy_skin_thickness = 0.3
  353. gap_fill_enabled = 1
  354. gap_fill_speed = 20
  355. gcode_comments = 0
  356. gcode_label_objects = 0
  357. gcode_resolution = 0.0125
  358. gcode_substitutions =
  359. infill_acceleration = 0
  360. infill_anchor = 600%
  361. infill_anchor_max = 50
  362. infill_every_layers = 1
  363. infill_extruder = 1
  364. infill_extrusion_width = 0.45
  365. infill_first = 0
  366. infill_only_where_needed = 0
  367. infill_overlap = 25%
  368. infill_speed = 80
  369. inherits =
  370. interface_shells = 0
  371. ironing = 0
  372. ironing_flowrate = 15%
  373. ironing_spacing = 0.1
  374. ironing_speed = 15
  375. ironing_type = top
  376. layer_height = 0.3
  377. max_print_speed = 80
  378. max_volumetric_extrusion_rate_slope_negative = 0
  379. max_volumetric_extrusion_rate_slope_positive = 0
  380. max_volumetric_speed = 0
  381. min_bead_width = 85%
  382. min_feature_size = 25%
  383. min_skirt_length = 50
  384. mmu_segmented_region_max_width = 0
  385. notes =
  386. only_retract_when_crossing_perimeters = 1
  387. ooze_prevention = 0
  388. output_filename_format = [input_filename_base].gcode
  389. overhangs = 1
  390. perimeter_acceleration = 0
  391. perimeter_extruder = 1
  392. perimeter_extrusion_width = 0.45
  393. perimeter_generator = arachne
  394. perimeter_speed = 60
  395. perimeters = 3
  396. post_process =
  397. print_settings_id =
  398. raft_contact_distance = 0.1
  399. raft_expansion = 1.5
  400. raft_first_layer_density = 90%
  401. raft_first_layer_expansion = 3
  402. raft_layers = 0
  403. resolution = 0
  404. seam_position = aligned
  405. single_extruder_multi_material_priming = 1
  406. skirt_distance = 6
  407. skirt_height = 1
  408. skirts = 3
  409. slice_closing_radius = 0.049
  410. slicing_mode = regular
  411. small_perimeter_speed = 15
  412. solid_infill_below_area = 70
  413. solid_infill_every_layers = 0
  414. solid_infill_extruder = 1
  415. solid_infill_extrusion_width = 0.45
  416. solid_infill_speed = 20
  417. spiral_vase = 0
  418. standby_temperature_delta = -5
  419. support_material = 0
  420. support_material_angle = 0
  421. support_material_auto = 1
  422. support_material_bottom_contact_distance = 0
  423. support_material_bottom_interface_layers = -1
  424. support_material_buildplate_only = 1
  425. support_material_closing_radius = 2
  426. support_material_contact_distance = 0.2
  427. support_material_enforce_layers = 0
  428. support_material_extruder = 1
  429. support_material_extrusion_width = 0.35
  430. support_material_interface_contact_loops = 0
  431. support_material_interface_extruder = 1
  432. support_material_interface_layers = 3
  433. support_material_interface_pattern = rectilinear
  434. support_material_interface_spacing = 0
  435. support_material_interface_speed = 100%
  436. support_material_pattern = rectilinear
  437. support_material_spacing = 2.5
  438. support_material_speed = 60
  439. support_material_style = grid
  440. support_material_synchronize_layers = 0
  441. support_material_threshold = 0
  442. support_material_with_sheath = 1
  443. support_material_xy_spacing = 50%
  444. thick_bridges = 1
  445. thin_walls = 1
  446. threads = 8
  447. top_fill_pattern = rectilinear
  448. top_infill_extrusion_width = 0.4
  449. top_solid_infill_speed = 15
  450. top_solid_layers = 3
  451. top_solid_min_thickness = 0
  452. travel_speed = 130
  453. travel_speed_z = 0
  454. wall_distribution_count = 1
  455. wall_transition_angle = 10
  456. wall_transition_filter_deviation = 25%
  457. wall_transition_length = 100%
  458. wipe_tower = 0
  459. wipe_tower_bridging = 10
  460. wipe_tower_brim_width = 2
  461. wipe_tower_no_sparse_layers = 0
  462. wipe_tower_rotation_angle = 0
  463. wipe_tower_width = 60
  464. wipe_tower_x = 180
  465. wipe_tower_y = 140
  466. xy_size_compensation = 0
  467. [print:Ender-3 PLA Mid]
  468. avoid_crossing_perimeters = 0
  469. avoid_crossing_perimeters_max_detour = 0
  470. bottom_fill_pattern = rectilinear
  471. bottom_solid_layers = 3
  472. bottom_solid_min_thickness = 0
  473. bridge_acceleration = 0
  474. bridge_angle = 0
  475. bridge_flow_ratio = 1
  476. bridge_speed = 60
  477. brim_separation = 0
  478. brim_type = outer_only
  479. brim_width = 0
  480. clip_multipart_objects = 0
  481. compatible_printers = Ender-3;"Ender-3 PETG"
  482. compatible_printers_condition =
  483. complete_objects = 0
  484. default_acceleration = 0
  485. dont_support_bridges = 1
  486. draft_shield = disabled
  487. elefant_foot_compensation = 0
  488. ensure_vertical_shell_thickness = 0
  489. external_perimeter_extrusion_width = 0.45
  490. external_perimeter_speed = 50%
  491. external_perimeters_first = 0
  492. extra_perimeters = 1
  493. extruder_clearance_height = 20
  494. extruder_clearance_radius = 20
  495. extrusion_width = 0.45
  496. fill_angle = 45
  497. fill_density = 20%
  498. fill_pattern = stars
  499. first_layer_acceleration = 0
  500. first_layer_acceleration_over_raft = 0
  501. first_layer_extrusion_width = 0.42
  502. first_layer_height = 0.1
  503. first_layer_speed = 30
  504. first_layer_speed_over_raft = 30
  505. fuzzy_skin = none
  506. fuzzy_skin_point_dist = 0.8
  507. fuzzy_skin_thickness = 0.3
  508. gap_fill_enabled = 1
  509. gap_fill_speed = 20
  510. gcode_comments = 0
  511. gcode_label_objects = 0
  512. gcode_resolution = 0.0125
  513. gcode_substitutions =
  514. infill_acceleration = 0
  515. infill_anchor = 600%
  516. infill_anchor_max = 50
  517. infill_every_layers = 1
  518. infill_extruder = 1
  519. infill_extrusion_width = 0.45
  520. infill_first = 0
  521. infill_only_where_needed = 0
  522. infill_overlap = 25%
  523. infill_speed = 80
  524. inherits =
  525. interface_shells = 0
  526. ironing = 0
  527. ironing_flowrate = 15%
  528. ironing_spacing = 0.1
  529. ironing_speed = 15
  530. ironing_type = top
  531. layer_height = 0.2
  532. max_print_speed = 80
  533. max_volumetric_extrusion_rate_slope_negative = 0
  534. max_volumetric_extrusion_rate_slope_positive = 0
  535. max_volumetric_speed = 0
  536. min_bead_width = 85%
  537. min_feature_size = 25%
  538. min_skirt_length = 50
  539. mmu_segmented_region_max_width = 0
  540. notes =
  541. only_retract_when_crossing_perimeters = 1
  542. ooze_prevention = 0
  543. output_filename_format = [input_filename_base].gcode
  544. overhangs = 1
  545. perimeter_acceleration = 0
  546. perimeter_extruder = 1
  547. perimeter_extrusion_width = 0.45
  548. perimeter_generator = arachne
  549. perimeter_speed = 60
  550. perimeters = 3
  551. post_process =
  552. print_settings_id =
  553. raft_contact_distance = 0.1
  554. raft_expansion = 1.5
  555. raft_first_layer_density = 90%
  556. raft_first_layer_expansion = 3
  557. raft_layers = 0
  558. resolution = 0
  559. seam_position = aligned
  560. single_extruder_multi_material_priming = 1
  561. skirt_distance = 6
  562. skirt_height = 1
  563. skirts = 3
  564. slice_closing_radius = 0.049
  565. slicing_mode = regular
  566. small_perimeter_speed = 15
  567. solid_infill_below_area = 70
  568. solid_infill_every_layers = 0
  569. solid_infill_extruder = 1
  570. solid_infill_extrusion_width = 0.45
  571. solid_infill_speed = 20
  572. spiral_vase = 0
  573. standby_temperature_delta = -5
  574. support_material = 0
  575. support_material_angle = 0
  576. support_material_auto = 1
  577. support_material_bottom_contact_distance = 0
  578. support_material_bottom_interface_layers = -1
  579. support_material_buildplate_only = 1
  580. support_material_closing_radius = 2
  581. support_material_contact_distance = 0.2
  582. support_material_enforce_layers = 0
  583. support_material_extruder = 1
  584. support_material_extrusion_width = 0.35
  585. support_material_interface_contact_loops = 0
  586. support_material_interface_extruder = 1
  587. support_material_interface_layers = 3
  588. support_material_interface_pattern = rectilinear
  589. support_material_interface_spacing = 0
  590. support_material_interface_speed = 100%
  591. support_material_pattern = rectilinear
  592. support_material_spacing = 2.5
  593. support_material_speed = 60
  594. support_material_style = grid
  595. support_material_synchronize_layers = 0
  596. support_material_threshold = 0
  597. support_material_with_sheath = 1
  598. support_material_xy_spacing = 50%
  599. thick_bridges = 1
  600. thin_walls = 1
  601. threads = 8
  602. top_fill_pattern = rectilinear
  603. top_infill_extrusion_width = 0.4
  604. top_solid_infill_speed = 15
  605. top_solid_layers = 3
  606. top_solid_min_thickness = 0
  607. travel_speed = 130
  608. travel_speed_z = 0
  609. wall_distribution_count = 1
  610. wall_transition_angle = 10
  611. wall_transition_filter_deviation = 25%
  612. wall_transition_length = 100%
  613. wipe_tower = 0
  614. wipe_tower_bridging = 10
  615. wipe_tower_brim_width = 2
  616. wipe_tower_no_sparse_layers = 0
  617. wipe_tower_rotation_angle = 0
  618. wipe_tower_width = 60
  619. wipe_tower_x = 180
  620. wipe_tower_y = 140
  621. xy_size_compensation = 0
  622. [print:Ender-3 PLA Small]
  623. avoid_crossing_perimeters = 0
  624. avoid_crossing_perimeters_max_detour = 0
  625. bottom_fill_pattern = rectilinear
  626. bottom_solid_layers = 3
  627. bottom_solid_min_thickness = 0
  628. bridge_acceleration = 0
  629. bridge_angle = 0
  630. bridge_flow_ratio = 1
  631. bridge_speed = 60
  632. brim_separation = 0
  633. brim_type = outer_only
  634. brim_width = 0
  635. clip_multipart_objects = 0
  636. compatible_printers = Ender-3;"Ender-3 PETG"
  637. compatible_printers_condition =
  638. complete_objects = 0
  639. default_acceleration = 0
  640. dont_support_bridges = 1
  641. draft_shield = disabled
  642. elefant_foot_compensation = 0
  643. ensure_vertical_shell_thickness = 0
  644. external_perimeter_extrusion_width = 0.45
  645. external_perimeter_speed = 50%
  646. external_perimeters_first = 0
  647. extra_perimeters = 1
  648. extruder_clearance_height = 20
  649. extruder_clearance_radius = 20
  650. extrusion_width = 0.45
  651. fill_angle = 45
  652. fill_density = 20%
  653. fill_pattern = stars
  654. first_layer_acceleration = 0
  655. first_layer_acceleration_over_raft = 0
  656. first_layer_extrusion_width = 0.42
  657. first_layer_height = 0.1
  658. first_layer_speed = 30
  659. first_layer_speed_over_raft = 30
  660. fuzzy_skin = none
  661. fuzzy_skin_point_dist = 0.8
  662. fuzzy_skin_thickness = 0.3
  663. gap_fill_enabled = 1
  664. gap_fill_speed = 20
  665. gcode_comments = 0
  666. gcode_label_objects = 0
  667. gcode_resolution = 0.0125
  668. gcode_substitutions =
  669. infill_acceleration = 0
  670. infill_anchor = 600%
  671. infill_anchor_max = 50
  672. infill_every_layers = 1
  673. infill_extruder = 1
  674. infill_extrusion_width = 0.45
  675. infill_first = 0
  676. infill_only_where_needed = 0
  677. infill_overlap = 25%
  678. infill_speed = 80
  679. inherits =
  680. interface_shells = 0
  681. ironing = 0
  682. ironing_flowrate = 15%
  683. ironing_spacing = 0.1
  684. ironing_speed = 15
  685. ironing_type = top
  686. layer_height = 0.1
  687. max_print_speed = 80
  688. max_volumetric_extrusion_rate_slope_negative = 0
  689. max_volumetric_extrusion_rate_slope_positive = 0
  690. max_volumetric_speed = 0
  691. min_bead_width = 85%
  692. min_feature_size = 25%
  693. min_skirt_length = 50
  694. mmu_segmented_region_max_width = 0
  695. notes =
  696. only_retract_when_crossing_perimeters = 1
  697. ooze_prevention = 0
  698. output_filename_format = [input_filename_base].gcode
  699. overhangs = 1
  700. perimeter_acceleration = 0
  701. perimeter_extruder = 1
  702. perimeter_extrusion_width = 0.45
  703. perimeter_generator = arachne
  704. perimeter_speed = 60
  705. perimeters = 3
  706. post_process =
  707. print_settings_id =
  708. raft_contact_distance = 0.1
  709. raft_expansion = 1.5
  710. raft_first_layer_density = 90%
  711. raft_first_layer_expansion = 3
  712. raft_layers = 0
  713. resolution = 0
  714. seam_position = aligned
  715. single_extruder_multi_material_priming = 1
  716. skirt_distance = 6
  717. skirt_height = 1
  718. skirts = 3
  719. slice_closing_radius = 0.049
  720. slicing_mode = regular
  721. small_perimeter_speed = 15
  722. solid_infill_below_area = 70
  723. solid_infill_every_layers = 0
  724. solid_infill_extruder = 1
  725. solid_infill_extrusion_width = 0.45
  726. solid_infill_speed = 20
  727. spiral_vase = 0
  728. standby_temperature_delta = -5
  729. support_material = 0
  730. support_material_angle = 0
  731. support_material_auto = 1
  732. support_material_bottom_contact_distance = 0
  733. support_material_bottom_interface_layers = -1
  734. support_material_buildplate_only = 1
  735. support_material_closing_radius = 2
  736. support_material_contact_distance = 0.2
  737. support_material_enforce_layers = 0
  738. support_material_extruder = 1
  739. support_material_extrusion_width = 0.35
  740. support_material_interface_contact_loops = 0
  741. support_material_interface_extruder = 1
  742. support_material_interface_layers = 3
  743. support_material_interface_pattern = rectilinear
  744. support_material_interface_spacing = 0
  745. support_material_interface_speed = 100%
  746. support_material_pattern = rectilinear
  747. support_material_spacing = 2.5
  748. support_material_speed = 60
  749. support_material_style = grid
  750. support_material_synchronize_layers = 0
  751. support_material_threshold = 0
  752. support_material_with_sheath = 1
  753. support_material_xy_spacing = 50%
  754. thick_bridges = 1
  755. thin_walls = 1
  756. threads = 8
  757. top_fill_pattern = rectilinear
  758. top_infill_extrusion_width = 0.4
  759. top_solid_infill_speed = 15
  760. top_solid_layers = 3
  761. top_solid_min_thickness = 0
  762. travel_speed = 130
  763. travel_speed_z = 0
  764. wall_distribution_count = 1
  765. wall_transition_angle = 10
  766. wall_transition_filter_deviation = 25%
  767. wall_transition_length = 100%
  768. wipe_tower = 0
  769. wipe_tower_bridging = 10
  770. wipe_tower_brim_width = 2
  771. wipe_tower_no_sparse_layers = 0
  772. wipe_tower_rotation_angle = 0
  773. wipe_tower_width = 60
  774. wipe_tower_x = 180
  775. wipe_tower_y = 140
  776. xy_size_compensation = 0
  777. [print:Fabrikator Mini]
  778. avoid_crossing_perimeters = 0
  779. avoid_crossing_perimeters_max_detour = 0
  780. bottom_fill_pattern = rectilinear
  781. bottom_solid_layers = 3
  782. bottom_solid_min_thickness = 0
  783. bridge_acceleration = 0
  784. bridge_angle = 0
  785. bridge_flow_ratio = 1
  786. bridge_speed = 20
  787. brim_separation = 0
  788. brim_type = outer_only
  789. brim_width = 4
  790. clip_multipart_objects = 0
  791. compatible_printers = "Fabrikator Mini"
  792. compatible_printers_condition =
  793. complete_objects = 0
  794. default_acceleration = 0
  795. dont_support_bridges = 1
  796. draft_shield = disabled
  797. elefant_foot_compensation = 0
  798. ensure_vertical_shell_thickness = 0
  799. external_perimeter_extrusion_width = 0.45
  800. external_perimeter_speed = 15
  801. external_perimeters_first = 0
  802. extra_perimeters = 1
  803. extruder_clearance_height = 20
  804. extruder_clearance_radius = 20
  805. extrusion_width = 0.45
  806. fill_angle = 45
  807. fill_density = 20%
  808. fill_pattern = stars
  809. first_layer_acceleration = 0
  810. first_layer_acceleration_over_raft = 0
  811. first_layer_extrusion_width = 0.42
  812. first_layer_height = 0.1
  813. first_layer_speed = 18
  814. first_layer_speed_over_raft = 30
  815. fuzzy_skin = none
  816. fuzzy_skin_point_dist = 0.8
  817. fuzzy_skin_thickness = 0.3
  818. gap_fill_enabled = 1
  819. gap_fill_speed = 20
  820. gcode_comments = 0
  821. gcode_label_objects = 0
  822. gcode_resolution = 0.0125
  823. gcode_substitutions =
  824. infill_acceleration = 0
  825. infill_anchor = 600%
  826. infill_anchor_max = 50
  827. infill_every_layers = 1
  828. infill_extruder = 1
  829. infill_extrusion_width = 0.45
  830. infill_first = 0
  831. infill_only_where_needed = 0
  832. infill_overlap = 25%
  833. infill_speed = 20
  834. inherits =
  835. interface_shells = 0
  836. ironing = 0
  837. ironing_flowrate = 15%
  838. ironing_spacing = 0.1
  839. ironing_speed = 15
  840. ironing_type = top
  841. layer_height = 0.2
  842. max_print_speed = 20
  843. max_volumetric_extrusion_rate_slope_negative = 0
  844. max_volumetric_extrusion_rate_slope_positive = 0
  845. max_volumetric_speed = 0
  846. min_bead_width = 85%
  847. min_feature_size = 25%
  848. min_skirt_length = 10
  849. mmu_segmented_region_max_width = 0
  850. notes =
  851. only_retract_when_crossing_perimeters = 1
  852. ooze_prevention = 0
  853. output_filename_format = [input_filename_base].gcode
  854. overhangs = 1
  855. perimeter_acceleration = 0
  856. perimeter_extruder = 1
  857. perimeter_extrusion_width = 0.45
  858. perimeter_generator = arachne
  859. perimeter_speed = 20
  860. perimeters = 3
  861. post_process =
  862. print_settings_id =
  863. raft_contact_distance = 0.1
  864. raft_expansion = 1.5
  865. raft_first_layer_density = 90%
  866. raft_first_layer_expansion = 3
  867. raft_layers = 0
  868. resolution = 0
  869. seam_position = aligned
  870. single_extruder_multi_material_priming = 1
  871. skirt_distance = 4
  872. skirt_height = 1
  873. skirts = 2
  874. slice_closing_radius = 0.049
  875. slicing_mode = regular
  876. small_perimeter_speed = 15
  877. solid_infill_below_area = 70
  878. solid_infill_every_layers = 0
  879. solid_infill_extruder = 1
  880. solid_infill_extrusion_width = 0.45
  881. solid_infill_speed = 20
  882. spiral_vase = 0
  883. standby_temperature_delta = -5
  884. support_material = 0
  885. support_material_angle = 0
  886. support_material_auto = 1
  887. support_material_bottom_contact_distance = 0
  888. support_material_bottom_interface_layers = -1
  889. support_material_buildplate_only = 1
  890. support_material_closing_radius = 2
  891. support_material_contact_distance = 0.2
  892. support_material_enforce_layers = 0
  893. support_material_extruder = 1
  894. support_material_extrusion_width = 0.35
  895. support_material_interface_contact_loops = 0
  896. support_material_interface_extruder = 1
  897. support_material_interface_layers = 3
  898. support_material_interface_pattern = rectilinear
  899. support_material_interface_spacing = 0
  900. support_material_interface_speed = 100%
  901. support_material_pattern = rectilinear
  902. support_material_spacing = 2.5
  903. support_material_speed = 20
  904. support_material_style = grid
  905. support_material_synchronize_layers = 0
  906. support_material_threshold = 0
  907. support_material_with_sheath = 1
  908. support_material_xy_spacing = 50%
  909. thick_bridges = 1
  910. thin_walls = 1
  911. threads = 8
  912. top_fill_pattern = rectilinear
  913. top_infill_extrusion_width = 0.4
  914. top_solid_infill_speed = 15
  915. top_solid_layers = 3
  916. top_solid_min_thickness = 0
  917. travel_speed = 20
  918. travel_speed_z = 0
  919. wall_distribution_count = 1
  920. wall_transition_angle = 10
  921. wall_transition_filter_deviation = 25%
  922. wall_transition_length = 100%
  923. wipe_tower = 0
  924. wipe_tower_bridging = 10
  925. wipe_tower_brim_width = 2
  926. wipe_tower_no_sparse_layers = 0
  927. wipe_tower_rotation_angle = 0
  928. wipe_tower_width = 60
  929. wipe_tower_x = 180
  930. wipe_tower_y = 140
  931. xy_size_compensation = 0
  932. [print:i3 AM8]
  933. avoid_crossing_perimeters = 1
  934. avoid_crossing_perimeters_max_detour = 0
  935. bottom_fill_pattern = monotonic
  936. bottom_solid_layers = 4
  937. bottom_solid_min_thickness = 0
  938. bridge_acceleration = 0
  939. bridge_angle = 0
  940. bridge_flow_ratio = 1
  941. bridge_speed = 120
  942. brim_separation = 0
  943. brim_type = outer_only
  944. brim_width = 0
  945. clip_multipart_objects = 1
  946. compatible_printers =
  947. compatible_printers_condition =
  948. complete_objects = 0
  949. default_acceleration = 0
  950. dont_support_bridges = 1
  951. draft_shield = disabled
  952. elefant_foot_compensation = 0
  953. ensure_vertical_shell_thickness = 1
  954. external_perimeter_extrusion_width = 0.45
  955. external_perimeter_speed = 60%
  956. external_perimeters_first = 0
  957. extra_perimeters = 1
  958. extruder_clearance_height = 20
  959. extruder_clearance_radius = 20
  960. extrusion_width = 0.45
  961. fill_angle = 45
  962. fill_density = 20%
  963. fill_pattern = honeycomb
  964. first_layer_acceleration = 0
  965. first_layer_acceleration_over_raft = 0
  966. first_layer_extrusion_width = 0.42
  967. first_layer_height = 0.2
  968. first_layer_speed = 50%
  969. first_layer_speed_over_raft = 30
  970. fuzzy_skin = none
  971. fuzzy_skin_point_dist = 0.8
  972. fuzzy_skin_thickness = 0.3
  973. gap_fill_enabled = 1
  974. gap_fill_speed = 30
  975. gcode_comments = 0
  976. gcode_label_objects = 0
  977. gcode_resolution = 0.0125
  978. gcode_substitutions =
  979. infill_acceleration = 0
  980. infill_anchor = 600%
  981. infill_anchor_max = 50
  982. infill_every_layers = 1
  983. infill_extruder = 1
  984. infill_extrusion_width = 0.45
  985. infill_first = 0
  986. infill_only_where_needed = 0
  987. infill_overlap = 25%
  988. infill_speed = 100
  989. inherits =
  990. interface_shells = 0
  991. ironing = 0
  992. ironing_flowrate = 15%
  993. ironing_spacing = 0.1
  994. ironing_speed = 15
  995. ironing_type = top
  996. layer_height = 0.3
  997. max_print_speed = 130
  998. max_volumetric_extrusion_rate_slope_negative = 0
  999. max_volumetric_extrusion_rate_slope_positive = 0
  1000. max_volumetric_speed = 0
  1001. min_bead_width = 85%
  1002. min_feature_size = 25%
  1003. min_skirt_length = 20
  1004. mmu_segmented_region_max_width = 0
  1005. notes =
  1006. only_retract_when_crossing_perimeters = 0
  1007. ooze_prevention = 0
  1008. output_filename_format = [input_filename_base].gcode
  1009. overhangs = 1
  1010. perimeter_acceleration = 0
  1011. perimeter_extruder = 1
  1012. perimeter_extrusion_width = 0.45
  1013. perimeter_generator = arachne
  1014. perimeter_speed = 100
  1015. perimeters = 4
  1016. post_process =
  1017. print_settings_id =
  1018. raft_contact_distance = 0.1
  1019. raft_expansion = 1.5
  1020. raft_first_layer_density = 90%
  1021. raft_first_layer_expansion = 3
  1022. raft_layers = 0
  1023. resolution = 0
  1024. seam_position = aligned
  1025. single_extruder_multi_material_priming = 1
  1026. skirt_distance = 6
  1027. skirt_height = 1
  1028. skirts = 3
  1029. slice_closing_radius = 0.049
  1030. slicing_mode = regular
  1031. small_perimeter_speed = 80%
  1032. solid_infill_below_area = 70
  1033. solid_infill_every_layers = 0
  1034. solid_infill_extruder = 1
  1035. solid_infill_extrusion_width = 0.45
  1036. solid_infill_speed = 75%
  1037. spiral_vase = 0
  1038. standby_temperature_delta = -5
  1039. support_material = 0
  1040. support_material_angle = 0
  1041. support_material_auto = 1
  1042. support_material_bottom_contact_distance = 0
  1043. support_material_bottom_interface_layers = -1
  1044. support_material_buildplate_only = 1
  1045. support_material_closing_radius = 2
  1046. support_material_contact_distance = 0.2
  1047. support_material_enforce_layers = 0
  1048. support_material_extruder = 1
  1049. support_material_extrusion_width = 0.35
  1050. support_material_interface_contact_loops = 0
  1051. support_material_interface_extruder = 1
  1052. support_material_interface_layers = 3
  1053. support_material_interface_pattern = rectilinear
  1054. support_material_interface_spacing = 0
  1055. support_material_interface_speed = 100%
  1056. support_material_pattern = rectilinear
  1057. support_material_spacing = 2.5
  1058. support_material_speed = 80
  1059. support_material_style = grid
  1060. support_material_synchronize_layers = 0
  1061. support_material_threshold = 0
  1062. support_material_with_sheath = 1
  1063. support_material_xy_spacing = 50%
  1064. thick_bridges = 1
  1065. thin_walls = 1
  1066. threads = 8
  1067. top_fill_pattern = monotonic
  1068. top_infill_extrusion_width = 0.4
  1069. top_solid_infill_speed = 75%
  1070. top_solid_layers = 4
  1071. top_solid_min_thickness = 0
  1072. travel_speed = 130
  1073. travel_speed_z = 0
  1074. wall_distribution_count = 1
  1075. wall_transition_angle = 10
  1076. wall_transition_filter_deviation = 25%
  1077. wall_transition_length = 100%
  1078. wipe_tower = 0
  1079. wipe_tower_bridging = 10
  1080. wipe_tower_brim_width = 2
  1081. wipe_tower_no_sparse_layers = 0
  1082. wipe_tower_rotation_angle = 0
  1083. wipe_tower_width = 60
  1084. wipe_tower_x = 180
  1085. wipe_tower_y = 140
  1086. xy_size_compensation = 0
  1087. [filament:CTC i3 Pro B PETG]
  1088. bed_temperature = 60
  1089. bridge_fan_speed = 100
  1090. compatible_printers = "CTC i3 Pro B"
  1091. compatible_printers_condition =
  1092. compatible_prints = "CTC i3 Pro B";"CTC i3 Pro B 0.5mm Nozzle"
  1093. compatible_prints_condition =
  1094. cooling = 1
  1095. disable_fan_first_layers = 3
  1096. end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
  1097. extrusion_multiplier = 1
  1098. fan_always_on = 0
  1099. fan_below_layer_time = 60
  1100. filament_colour = #29B2B2
  1101. filament_cooling_final_speed = 3.4
  1102. filament_cooling_initial_speed = 2.2
  1103. filament_cooling_moves = 4
  1104. filament_cost = 25
  1105. filament_density = 1.23
  1106. filament_deretract_speed = nil
  1107. filament_diameter = 1.75
  1108. filament_load_time = 0
  1109. filament_loading_speed = 28
  1110. filament_loading_speed_start = 3
  1111. filament_max_volumetric_speed = 0
  1112. filament_minimal_purge_on_wipe_tower = 15
  1113. filament_notes = ""
  1114. filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
  1115. filament_retract_before_travel = nil
  1116. filament_retract_before_wipe = nil
  1117. filament_retract_layer_change = nil
  1118. filament_retract_length = nil
  1119. filament_retract_lift = nil
  1120. filament_retract_lift_above = nil
  1121. filament_retract_lift_below = nil
  1122. filament_retract_restart_extra = nil
  1123. filament_retract_speed = nil
  1124. filament_settings_id = ""
  1125. filament_soluble = 0
  1126. filament_spool_weight = 0
  1127. filament_toolchange_delay = 0
  1128. filament_type = PET
  1129. filament_unload_time = 0
  1130. filament_unloading_speed = 90
  1131. filament_unloading_speed_start = 100
  1132. filament_vendor = (Unknown)
  1133. filament_wipe = nil
  1134. first_layer_bed_temperature = 60
  1135. first_layer_temperature = 220
  1136. full_fan_speed_layer = 0
  1137. inherits =
  1138. max_fan_speed = 100
  1139. min_fan_speed = 35
  1140. min_print_speed = 10
  1141. slowdown_below_layer_time = 5
  1142. start_filament_gcode = "; Filament gcode\n"
  1143. temperature = 220
  1144. [filament:CTC i3 Pro B PLA]
  1145. bed_temperature = 40
  1146. bridge_fan_speed = 100
  1147. compatible_printers = "CTC i3 Pro B"
  1148. compatible_printers_condition =
  1149. compatible_prints = "CTC i3 Pro B";"CTC i3 Pro B 0.5mm Nozzle"
  1150. compatible_prints_condition =
  1151. cooling = 1
  1152. disable_fan_first_layers = 3
  1153. end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
  1154. extrusion_multiplier = 1
  1155. fan_always_on = 0
  1156. fan_below_layer_time = 60
  1157. filament_colour = #29B2B2
  1158. filament_cooling_final_speed = 3.4
  1159. filament_cooling_initial_speed = 2.2
  1160. filament_cooling_moves = 4
  1161. filament_cost = 20
  1162. filament_density = 1.24
  1163. filament_deretract_speed = nil
  1164. filament_diameter = 1.75
  1165. filament_load_time = 0
  1166. filament_loading_speed = 28
  1167. filament_loading_speed_start = 3
  1168. filament_max_volumetric_speed = 0
  1169. filament_minimal_purge_on_wipe_tower = 15
  1170. filament_notes = ""
  1171. filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
  1172. filament_retract_before_travel = nil
  1173. filament_retract_before_wipe = nil
  1174. filament_retract_layer_change = nil
  1175. filament_retract_length = nil
  1176. filament_retract_lift = nil
  1177. filament_retract_lift_above = nil
  1178. filament_retract_lift_below = nil
  1179. filament_retract_restart_extra = nil
  1180. filament_retract_speed = nil
  1181. filament_settings_id = ""
  1182. filament_soluble = 0
  1183. filament_spool_weight = 0
  1184. filament_toolchange_delay = 0
  1185. filament_type = PLA
  1186. filament_unload_time = 0
  1187. filament_unloading_speed = 90
  1188. filament_unloading_speed_start = 100
  1189. filament_vendor = (Unknown)
  1190. filament_wipe = nil
  1191. first_layer_bed_temperature = 40
  1192. first_layer_temperature = 200
  1193. full_fan_speed_layer = 0
  1194. inherits =
  1195. max_fan_speed = 100
  1196. min_fan_speed = 35
  1197. min_print_speed = 10
  1198. slowdown_below_layer_time = 5
  1199. start_filament_gcode = "; Filament gcode\n"
  1200. temperature = 200
  1201. [filament:CTC i3 Pro B TPE]
  1202. bed_temperature = 45
  1203. bridge_fan_speed = 100
  1204. compatible_printers = "CTC i3 Pro B"
  1205. compatible_printers_condition =
  1206. compatible_prints = "CTC i3 Pro B";"CTC i3 Pro B 0.5mm Nozzle"
  1207. compatible_prints_condition =
  1208. cooling = 0
  1209. disable_fan_first_layers = 3
  1210. end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
  1211. extrusion_multiplier = 1
  1212. fan_always_on = 0
  1213. fan_below_layer_time = 60
  1214. filament_colour = #29B2B2
  1215. filament_cooling_final_speed = 3.4
  1216. filament_cooling_initial_speed = 2.2
  1217. filament_cooling_moves = 4
  1218. filament_cost = 0
  1219. filament_density = 0
  1220. filament_deretract_speed = nil
  1221. filament_diameter = 1.75
  1222. filament_load_time = 0
  1223. filament_loading_speed = 28
  1224. filament_loading_speed_start = 3
  1225. filament_max_volumetric_speed = 0
  1226. filament_minimal_purge_on_wipe_tower = 15
  1227. filament_notes = ""
  1228. filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
  1229. filament_retract_before_travel = nil
  1230. filament_retract_before_wipe = nil
  1231. filament_retract_layer_change = nil
  1232. filament_retract_length = nil
  1233. filament_retract_lift = nil
  1234. filament_retract_lift_above = nil
  1235. filament_retract_lift_below = nil
  1236. filament_retract_restart_extra = nil
  1237. filament_retract_speed = nil
  1238. filament_settings_id = ""
  1239. filament_soluble = 0
  1240. filament_spool_weight = 0
  1241. filament_toolchange_delay = 0
  1242. filament_type = FLEX
  1243. filament_unload_time = 0
  1244. filament_unloading_speed = 90
  1245. filament_unloading_speed_start = 100
  1246. filament_vendor = (Unknown)
  1247. filament_wipe = nil
  1248. first_layer_bed_temperature = 45
  1249. first_layer_temperature = 220
  1250. full_fan_speed_layer = 0
  1251. inherits =
  1252. max_fan_speed = 100
  1253. min_fan_speed = 35
  1254. min_print_speed = 10
  1255. slowdown_below_layer_time = 5
  1256. start_filament_gcode = "; Filament gcode\n"
  1257. temperature = 220
  1258. [filament:Ender-3 PETG]
  1259. bed_temperature = 70
  1260. bridge_fan_speed = 100
  1261. compatible_printers = Ender-3
  1262. compatible_printers_condition =
  1263. compatible_prints = "Ender-3 PLA Large";"Ender-3 PLA Mid";"Ender-3 PLA Small"
  1264. compatible_prints_condition =
  1265. cooling = 1
  1266. disable_fan_first_layers = 3
  1267. end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
  1268. extrusion_multiplier = 1
  1269. fan_always_on = 0
  1270. fan_below_layer_time = 60
  1271. filament_colour = #29B2B2
  1272. filament_cooling_final_speed = 3.4
  1273. filament_cooling_initial_speed = 2.2
  1274. filament_cooling_moves = 4
  1275. filament_cost = 0
  1276. filament_density = 0
  1277. filament_deretract_speed = nil
  1278. filament_diameter = 1.75
  1279. filament_load_time = 0
  1280. filament_loading_speed = 28
  1281. filament_loading_speed_start = 3
  1282. filament_max_volumetric_speed = 0
  1283. filament_minimal_purge_on_wipe_tower = 15
  1284. filament_notes = ""
  1285. filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
  1286. filament_retract_before_travel = nil
  1287. filament_retract_before_wipe = nil
  1288. filament_retract_layer_change = nil
  1289. filament_retract_length = nil
  1290. filament_retract_lift = nil
  1291. filament_retract_lift_above = nil
  1292. filament_retract_lift_below = nil
  1293. filament_retract_restart_extra = nil
  1294. filament_retract_speed = 25
  1295. filament_settings_id = ""
  1296. filament_soluble = 0
  1297. filament_spool_weight = 0
  1298. filament_toolchange_delay = 0
  1299. filament_type = PET
  1300. filament_unload_time = 0
  1301. filament_unloading_speed = 90
  1302. filament_unloading_speed_start = 100
  1303. filament_vendor = (Unknown)
  1304. filament_wipe = nil
  1305. first_layer_bed_temperature = 70
  1306. first_layer_temperature = 220
  1307. full_fan_speed_layer = 0
  1308. inherits =
  1309. max_fan_speed = 100
  1310. min_fan_speed = 35
  1311. min_print_speed = 10
  1312. slowdown_below_layer_time = 5
  1313. start_filament_gcode = "; Filament gcode\n"
  1314. temperature = 220
  1315. [filament:Ender-3 PLA]
  1316. bed_temperature = 60
  1317. bridge_fan_speed = 100
  1318. compatible_printers = Ender-3
  1319. compatible_printers_condition =
  1320. compatible_prints = "Ender-3 PLA Large";"Ender-3 PLA Mid";"Ender-3 PLA Small"
  1321. compatible_prints_condition =
  1322. cooling = 1
  1323. disable_fan_first_layers = 3
  1324. end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
  1325. extrusion_multiplier = 1
  1326. fan_always_on = 0
  1327. fan_below_layer_time = 60
  1328. filament_colour = #29B2B2
  1329. filament_cooling_final_speed = 3.4
  1330. filament_cooling_initial_speed = 2.2
  1331. filament_cooling_moves = 4
  1332. filament_cost = 0
  1333. filament_density = 0
  1334. filament_deretract_speed = nil
  1335. filament_diameter = 1.75
  1336. filament_load_time = 0
  1337. filament_loading_speed = 28
  1338. filament_loading_speed_start = 3
  1339. filament_max_volumetric_speed = 0
  1340. filament_minimal_purge_on_wipe_tower = 15
  1341. filament_notes = ""
  1342. filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
  1343. filament_retract_before_travel = nil
  1344. filament_retract_before_wipe = nil
  1345. filament_retract_layer_change = nil
  1346. filament_retract_length = nil
  1347. filament_retract_lift = nil
  1348. filament_retract_lift_above = nil
  1349. filament_retract_lift_below = nil
  1350. filament_retract_restart_extra = nil
  1351. filament_retract_speed = nil
  1352. filament_settings_id = ""
  1353. filament_soluble = 0
  1354. filament_spool_weight = 0
  1355. filament_toolchange_delay = 0
  1356. filament_type = PLA
  1357. filament_unload_time = 0
  1358. filament_unloading_speed = 90
  1359. filament_unloading_speed_start = 100
  1360. filament_vendor = (Unknown)
  1361. filament_wipe = nil
  1362. first_layer_bed_temperature = 60
  1363. first_layer_temperature = 200
  1364. full_fan_speed_layer = 0
  1365. inherits =
  1366. max_fan_speed = 100
  1367. min_fan_speed = 35
  1368. min_print_speed = 10
  1369. slowdown_below_layer_time = 5
  1370. start_filament_gcode = "; Filament gcode\n"
  1371. temperature = 200
  1372. [filament:Fabrikator Mini]
  1373. bed_temperature = 65
  1374. bridge_fan_speed = 100
  1375. compatible_printers = "Fabrikator Mini"
  1376. compatible_printers_condition =
  1377. compatible_prints = "Fabrikator Mini"
  1378. compatible_prints_condition =
  1379. cooling = 1
  1380. disable_fan_first_layers = 3
  1381. end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
  1382. extrusion_multiplier = 1
  1383. fan_always_on = 0
  1384. fan_below_layer_time = 60
  1385. filament_colour = #29B2B2
  1386. filament_cooling_final_speed = 3.4
  1387. filament_cooling_initial_speed = 2.2
  1388. filament_cooling_moves = 4
  1389. filament_cost = 17.5
  1390. filament_density = 0
  1391. filament_deretract_speed = nil
  1392. filament_diameter = 1.75
  1393. filament_load_time = 0
  1394. filament_loading_speed = 28
  1395. filament_loading_speed_start = 3
  1396. filament_max_volumetric_speed = 0
  1397. filament_minimal_purge_on_wipe_tower = 15
  1398. filament_notes = ""
  1399. filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
  1400. filament_retract_before_travel = nil
  1401. filament_retract_before_wipe = nil
  1402. filament_retract_layer_change = nil
  1403. filament_retract_length = nil
  1404. filament_retract_lift = nil
  1405. filament_retract_lift_above = nil
  1406. filament_retract_lift_below = nil
  1407. filament_retract_restart_extra = nil
  1408. filament_retract_speed = nil
  1409. filament_settings_id = ""
  1410. filament_soluble = 0
  1411. filament_spool_weight = 0
  1412. filament_toolchange_delay = 0
  1413. filament_type = PLA
  1414. filament_unload_time = 0
  1415. filament_unloading_speed = 90
  1416. filament_unloading_speed_start = 100
  1417. filament_vendor = (Unknown)
  1418. filament_wipe = nil
  1419. first_layer_bed_temperature = 65
  1420. first_layer_temperature = 190
  1421. full_fan_speed_layer = 0
  1422. inherits =
  1423. max_fan_speed = 100
  1424. min_fan_speed = 35
  1425. min_print_speed = 5
  1426. slowdown_below_layer_time = 15
  1427. start_filament_gcode = "; Filament gcode\n"
  1428. temperature = 190
  1429. [filament:i3 AM8 PETG]
  1430. bed_temperature = 60
  1431. bridge_fan_speed = 100
  1432. compatible_printers =
  1433. compatible_printers_condition =
  1434. compatible_prints =
  1435. compatible_prints_condition =
  1436. cooling = 1
  1437. disable_fan_first_layers = 3
  1438. end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
  1439. extrusion_multiplier = 1
  1440. fan_always_on = 0
  1441. fan_below_layer_time = 60
  1442. filament_colour = #29B2B2
  1443. filament_cooling_final_speed = 3.4
  1444. filament_cooling_initial_speed = 2.2
  1445. filament_cooling_moves = 4
  1446. filament_cost = 20
  1447. filament_density = 1.27
  1448. filament_deretract_speed = nil
  1449. filament_diameter = 1.75
  1450. filament_load_time = 0
  1451. filament_loading_speed = 28
  1452. filament_loading_speed_start = 3
  1453. filament_max_volumetric_speed = 0
  1454. filament_minimal_purge_on_wipe_tower = 15
  1455. filament_notes = ""
  1456. filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
  1457. filament_retract_before_travel = nil
  1458. filament_retract_before_wipe = nil
  1459. filament_retract_layer_change = nil
  1460. filament_retract_length = nil
  1461. filament_retract_lift = nil
  1462. filament_retract_lift_above = nil
  1463. filament_retract_lift_below = nil
  1464. filament_retract_restart_extra = nil
  1465. filament_retract_speed = nil
  1466. filament_settings_id = ""
  1467. filament_soluble = 0
  1468. filament_spool_weight = 0
  1469. filament_toolchange_delay = 0
  1470. filament_type = PET
  1471. filament_unload_time = 0
  1472. filament_unloading_speed = 90
  1473. filament_unloading_speed_start = 100
  1474. filament_vendor = (Unknown)
  1475. filament_wipe = nil
  1476. first_layer_bed_temperature = 60
  1477. first_layer_temperature = 230
  1478. full_fan_speed_layer = 0
  1479. inherits =
  1480. max_fan_speed = 100
  1481. min_fan_speed = 35
  1482. min_print_speed = 10
  1483. slowdown_below_layer_time = 5
  1484. start_filament_gcode = "; Filament gcode\n"
  1485. temperature = 230
  1486. [filament:i3 AM8 PLA]
  1487. bed_temperature = 50
  1488. bridge_fan_speed = 100
  1489. compatible_printers =
  1490. compatible_printers_condition =
  1491. compatible_prints =
  1492. compatible_prints_condition =
  1493. cooling = 1
  1494. disable_fan_first_layers = 3
  1495. end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
  1496. extrusion_multiplier = 1
  1497. fan_always_on = 0
  1498. fan_below_layer_time = 60
  1499. filament_colour = #29B2B2
  1500. filament_cooling_final_speed = 3.4
  1501. filament_cooling_initial_speed = 2.2
  1502. filament_cooling_moves = 4
  1503. filament_cost = 20
  1504. filament_density = 1.24
  1505. filament_deretract_speed = nil
  1506. filament_diameter = 1.75
  1507. filament_load_time = 0
  1508. filament_loading_speed = 28
  1509. filament_loading_speed_start = 3
  1510. filament_max_volumetric_speed = 0
  1511. filament_minimal_purge_on_wipe_tower = 15
  1512. filament_notes = ""
  1513. filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
  1514. filament_retract_before_travel = nil
  1515. filament_retract_before_wipe = nil
  1516. filament_retract_layer_change = nil
  1517. filament_retract_length = nil
  1518. filament_retract_lift = nil
  1519. filament_retract_lift_above = nil
  1520. filament_retract_lift_below = nil
  1521. filament_retract_restart_extra = nil
  1522. filament_retract_speed = nil
  1523. filament_settings_id = ""
  1524. filament_soluble = 0
  1525. filament_spool_weight = 0
  1526. filament_toolchange_delay = 0
  1527. filament_type = PLA
  1528. filament_unload_time = 0
  1529. filament_unloading_speed = 90
  1530. filament_unloading_speed_start = 100
  1531. filament_vendor = (Unknown)
  1532. filament_wipe = nil
  1533. first_layer_bed_temperature = 50
  1534. first_layer_temperature = 200
  1535. full_fan_speed_layer = 0
  1536. inherits =
  1537. max_fan_speed = 100
  1538. min_fan_speed = 35
  1539. min_print_speed = 10
  1540. slowdown_below_layer_time = 5
  1541. start_filament_gcode = "; Filament gcode\n"
  1542. temperature = 200
  1543. [sla_print:0.1 Fast - Copy]
  1544. compatible_printers =
  1545. compatible_printers_condition = printer_model=="SL1"
  1546. default_sla_print_profile =
  1547. faded_layers = 10
  1548. hollowing_closing_distance = 2
  1549. hollowing_enable = 0
  1550. hollowing_min_thickness = 3
  1551. hollowing_quality = 0.5
  1552. inherits = 0.1 Fast
  1553. layer_height = 0.1
  1554. output_filename_format = [input_filename_base].sl1
  1555. pad_around_object = 0
  1556. pad_around_object_everywhere = 0
  1557. pad_brim_size = 1.6
  1558. pad_enable = 1
  1559. pad_max_merge_distance = 50
  1560. pad_object_connector_penetration = 0.3
  1561. pad_object_connector_stride = 10
  1562. pad_object_connector_width = 0.5
  1563. pad_object_gap = 1
  1564. pad_wall_height = 0
  1565. pad_wall_slope = 45
  1566. pad_wall_thickness = 0.5
  1567. sla_print_settings_id =
  1568. slice_closing_radius = 0.005
  1569. slicing_mode = regular
  1570. support_base_diameter = 3
  1571. support_base_height = 1
  1572. support_base_safety_distance = 1
  1573. support_buildplate_only = 0
  1574. support_critical_angle = 45
  1575. support_head_front_diameter = 0.5
  1576. support_head_penetration = 0.5
  1577. support_head_width = 3
  1578. support_max_bridge_length = 10
  1579. support_max_bridges_on_pillar = 3
  1580. support_max_pillar_link_distance = 10
  1581. support_object_elevation = 5
  1582. support_pillar_connection_mode = zigzag
  1583. support_pillar_diameter = 1.3
  1584. support_pillar_widening_factor = 0
  1585. support_points_density_relative = 100
  1586. support_points_minimal_distance = 1
  1587. support_small_pillar_diameter_percent = 60%
  1588. supports_enable = 1
  1589. [sla_material:Anycubic Grey]
  1590. bottle_cost = 0
  1591. bottle_volume = 1000
  1592. bottle_weight = 1
  1593. compatible_printers =
  1594. compatible_printers_condition = printer_model=="SL1"
  1595. compatible_prints =
  1596. compatible_prints_condition = layer_height == 0.05
  1597. default_sla_material_profile =
  1598. exposure_time = 15
  1599. inherits = Prusa Orange Tough @0.05
  1600. initial_exposure_time = 120
  1601. initial_layer_height = 0.1
  1602. material_colour = #FF8040
  1603. material_correction = 1,1,1
  1604. material_correction_x = 1
  1605. material_correction_y = 1
  1606. material_correction_z = 1
  1607. material_density = 1
  1608. material_notes =
  1609. material_print_speed = fast
  1610. material_type = Tough
  1611. material_vendor = Made for Prusa
  1612. sla_material_settings_id =
  1613. [sla_material:Prusa Orange Tough @0.1 - Copy]
  1614. bottle_cost = 0
  1615. bottle_volume = 1000
  1616. bottle_weight = 1
  1617. compatible_printers =
  1618. compatible_printers_condition = printer_model=="SL1"
  1619. compatible_prints =
  1620. compatible_prints_condition = layer_height == 0.1
  1621. default_sla_material_profile =
  1622. exposure_time = 15
  1623. inherits = Prusa Orange Tough @0.1
  1624. initial_exposure_time = 120
  1625. initial_layer_height = 0.1
  1626. material_colour = #FF8040
  1627. material_correction = 1,1,1
  1628. material_correction_x = 1
  1629. material_correction_y = 1
  1630. material_correction_z = 1
  1631. material_density = 1
  1632. material_notes =
  1633. material_print_speed = fast
  1634. material_type = Tough
  1635. material_vendor = Made for Prusa
  1636. sla_material_settings_id =
  1637. [printer:CTC i3 Pro B]
  1638. bed_custom_model =
  1639. bed_custom_texture =
  1640. bed_shape = 0x0,195x0,195x183,0x183
  1641. before_layer_gcode =
  1642. between_objects_gcode =
  1643. color_change_gcode = M600
  1644. cooling_tube_length = 5
  1645. cooling_tube_retraction = 91.5
  1646. default_filament_profile = ""
  1647. default_print_profile =
  1648. deretract_speed = 0
  1649. end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off bed\n\nG91 ; relative positioning\nG1 E-2.5 F40 ; retract some filament\nG1 Z+2.0 E-2.0 F{travel_speed * 60} ; move z up and retract more\n\nG90 ; absolute positioning\nG0 X0 Y180 ; move out of the way\nM84 ; disable motors\nM117 Finished!\n
  1650. extra_loading_move = -2
  1651. extruder_colour = ""
  1652. extruder_offset = 0x0
  1653. gcode_flavor = marlin
  1654. high_current_on_filament_swap = 0
  1655. host_type = octoprint
  1656. inherits =
  1657. layer_gcode =
  1658. machine_limits_usage = emit_to_gcode
  1659. machine_max_acceleration_e = 600,5000
  1660. machine_max_acceleration_extruding = 500,1250
  1661. machine_max_acceleration_retracting = 500,1250
  1662. machine_max_acceleration_travel = 1500,1250
  1663. machine_max_acceleration_x = 1000,1000
  1664. machine_max_acceleration_y = 1000,1000
  1665. machine_max_acceleration_z = 100,200
  1666. machine_max_feedrate_e = 120,120
  1667. machine_max_feedrate_x = 150,200
  1668. machine_max_feedrate_y = 150,200
  1669. machine_max_feedrate_z = 12,12
  1670. machine_max_jerk_e = 2.5,2.5
  1671. machine_max_jerk_x = 10,10
  1672. machine_max_jerk_y = 10,10
  1673. machine_max_jerk_z = 0.2,0.4
  1674. machine_min_extruding_rate = 0,0
  1675. machine_min_travel_rate = 0,0
  1676. max_layer_height = 0.3
  1677. max_print_height = 192
  1678. min_layer_height = 0.07
  1679. nozzle_diameter = 0.5
  1680. parking_pos_retraction = 92
  1681. pause_print_gcode = M601
  1682. print_host =
  1683. printer_model =
  1684. printer_notes =
  1685. printer_settings_id =
  1686. printer_technology = FFF
  1687. printer_variant =
  1688. printer_vendor =
  1689. printhost_apikey =
  1690. printhost_cafile =
  1691. remaining_times = 0
  1692. retract_before_travel = 2
  1693. retract_before_wipe = 0%
  1694. retract_layer_change = 0
  1695. retract_length = 2.5
  1696. retract_length_toolchange = 10
  1697. retract_lift = 0
  1698. retract_lift_above = 0
  1699. retract_lift_below = 0
  1700. retract_restart_extra = 0
  1701. retract_restart_extra_toolchange = 0
  1702. retract_speed = 25
  1703. silent_mode = 0
  1704. single_extruder_multi_material = 0
  1705. start_gcode = M140 S42 ; start heating bed\n\nG21 ; metric\nG90 ; absolute positioning\nM82 ; extruder absolute\nM107 ; fan off\nG28 ; home all axes\n;G0 Z25 F{travel_speed * 60} ; lift nozzle\n;G0 X10 Y-5 F{travel_speed * 60} ; move to xy origin\n\nM190 S35 ; wait for heating bed\nM140 S[first_layer_bed_temperature] ; start heating bed\nM104 S[first_layer_temperature] ; start heating extruder\n\n;G29 ; perform auto bed leveling\n;G0 Z25 F{travel_speed * 60} ; lift nozzle\n;G0 X10 Y-5 F{travel_speed * 60} ; move to xy origin\n\nM190 S[first_layer_bed_temperature] ; wait for heating bed\nM109 S[first_layer_temperature] ; wait for heating extruder\n\n;G0 Z1 F{travel_speed * 60} ; lift nozzle\n;G0 X10 Y-5 F{travel_speed * 60} ; move to xy origin\n\n;G0 Z0.1 F{travel_speed * 60} ; move z down\n;G92 E0 ; zero extruder\n;G1 X60 E9 F600 ; start purge line\n;G1 X100 E12.5 F600 ; finish purge line\n;G1 X120 E9.0 F600 ; retract\n\nG92 E0 ; zero extruder\nG0 Z5 F{travel_speed * 60} ; lift nozzle\n\n;G0 X97 Y91 ; move to center\nM117 Printing...\n
  1706. template_custom_gcode =
  1707. thumbnails =
  1708. thumbnails_format = PNG
  1709. toolchange_gcode =
  1710. use_firmware_retraction = 0
  1711. use_relative_e_distances = 0
  1712. use_volumetric_e = 0
  1713. variable_layer_height = 1
  1714. wipe = 0
  1715. z_offset = 0
  1716. [printer:Ender-3]
  1717. bed_custom_model =
  1718. bed_custom_texture =
  1719. bed_shape = 0x0,235x0,235x235,0x235
  1720. before_layer_gcode =
  1721. between_objects_gcode =
  1722. color_change_gcode = M600
  1723. cooling_tube_length = 5
  1724. cooling_tube_retraction = 91.5
  1725. default_filament_profile = ""
  1726. default_print_profile =
  1727. deretract_speed = 0
  1728. end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nG91 ; relative positioning\nG1 E-0.5 F40 ; retract some filament\nG1 Z+2.0 E-0.5 F{travel_speed * 60} ; move z up and retract more\nG90 ; absolute positioning\nG0 X0 Y230 ; move out of the way\nM84 ; disable motors\nM117 Finished!\n
  1729. extra_loading_move = -2
  1730. extruder_colour = ""
  1731. extruder_offset = 0x0
  1732. gcode_flavor = marlin
  1733. high_current_on_filament_swap = 0
  1734. host_type = octoprint
  1735. inherits =
  1736. layer_gcode =
  1737. machine_limits_usage = emit_to_gcode
  1738. machine_max_acceleration_e = 10000,5000
  1739. machine_max_acceleration_extruding = 1500,1250
  1740. machine_max_acceleration_retracting = 1500,1250
  1741. machine_max_acceleration_travel = 1500,1250
  1742. machine_max_acceleration_x = 9000,1000
  1743. machine_max_acceleration_y = 9000,1000
  1744. machine_max_acceleration_z = 500,200
  1745. machine_max_feedrate_e = 120,120
  1746. machine_max_feedrate_x = 500,200
  1747. machine_max_feedrate_y = 500,200
  1748. machine_max_feedrate_z = 12,12
  1749. machine_max_jerk_e = 2.5,2.5
  1750. machine_max_jerk_x = 10,10
  1751. machine_max_jerk_y = 10,10
  1752. machine_max_jerk_z = 0.2,0.4
  1753. machine_min_extruding_rate = 0,0
  1754. machine_min_travel_rate = 0,0
  1755. max_layer_height = 0
  1756. max_print_height = 200
  1757. min_layer_height = 0.07
  1758. nozzle_diameter = 0.4
  1759. parking_pos_retraction = 92
  1760. pause_print_gcode = M601
  1761. print_host =
  1762. printer_model =
  1763. printer_notes =
  1764. printer_settings_id =
  1765. printer_technology = FFF
  1766. printer_variant =
  1767. printer_vendor =
  1768. printhost_apikey =
  1769. printhost_cafile =
  1770. remaining_times = 0
  1771. retract_before_travel = 2
  1772. retract_before_wipe = 0%
  1773. retract_layer_change = 0
  1774. retract_length = 5
  1775. retract_length_toolchange = 10
  1776. retract_lift = 0
  1777. retract_lift_above = 0
  1778. retract_lift_below = 0
  1779. retract_restart_extra = 0
  1780. retract_restart_extra_toolchange = 0
  1781. retract_speed = 40
  1782. silent_mode = 0
  1783. single_extruder_multi_material = 0
  1784. start_gcode = M140 S[first_layer_bed_temperature] ; start heating bed\nG21 ; metric\nG90 ; absolute positioning\nM82 ; extruder absolute\nM107 ; fan off\nG28 ; home all axes\nM104 S[first_layer_temperature] ; start heating extruder\nG0 Z10 F{travel_speed * 60} ; lift nozzle\nG0 X20 Y40 F{travel_speed * 60} ; move to xy origin\nM190 S[first_layer_bed_temperature] ; wait for heating bed\nM109 S[first_layer_temperature] ; wait for heating extruder\nG0 X30 Z0.1 F{travel_speed * 60} ; move z down\nG92 E0 ; zero extruder\nG1 X80 E9 F600 ; start purge line\nG1 X120 E12.5 F600 ; finish purge line\nG1 X140 E-2 F600 ; retract\nG92 E0 ; zero extruder\nG0 Z10 F{travel_speed * 60} ; lift nozzle\nG0 X115 Y115 F{travel_speed * 60} ; move to center\nM117 Printing...\n
  1785. template_custom_gcode =
  1786. thumbnails =
  1787. thumbnails_format = PNG
  1788. toolchange_gcode =
  1789. use_firmware_retraction = 0
  1790. use_relative_e_distances = 0
  1791. use_volumetric_e = 0
  1792. variable_layer_height = 1
  1793. wipe = 0
  1794. z_offset = 0
  1795. [printer:Fabrikator Mini]
  1796. bed_custom_model =
  1797. bed_custom_texture =
  1798. bed_shape = 0x0,80x0,80x80,0x80
  1799. before_layer_gcode =
  1800. between_objects_gcode =
  1801. color_change_gcode = M600
  1802. cooling_tube_length = 5
  1803. cooling_tube_retraction = 91.5
  1804. default_filament_profile = ""
  1805. default_print_profile =
  1806. deretract_speed = 0
  1807. end_gcode = M104 S0 ; extruder heater off\nM140 S0 ; heated bed heater off (if you have it)\nG91 ; relative positioning\nG1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 F{travel_speed * 60} ; move Z up a bit and retract filament even more\nG90 ; absolute positioning\nG1 X0 Y0 ; move x/y without homing to keep leveling on\nM84 ; turn off stepper motors
  1808. extra_loading_move = -2
  1809. extruder_colour = ""
  1810. extruder_offset = 0x0
  1811. gcode_flavor = marlin
  1812. high_current_on_filament_swap = 0
  1813. host_type = octoprint
  1814. inherits =
  1815. layer_gcode =
  1816. machine_limits_usage = emit_to_gcode
  1817. machine_max_acceleration_e = 200,5000
  1818. machine_max_acceleration_extruding = 200,1250
  1819. machine_max_acceleration_retracting = 200,1250
  1820. machine_max_acceleration_travel = 1500,1250
  1821. machine_max_acceleration_x = 150,1000
  1822. machine_max_acceleration_y = 150,1000
  1823. machine_max_acceleration_z = 40,200
  1824. machine_max_feedrate_e = 40,120
  1825. machine_max_feedrate_x = 40,200
  1826. machine_max_feedrate_y = 40,200
  1827. machine_max_feedrate_z = 2,12
  1828. machine_max_jerk_e = 2.5,2.5
  1829. machine_max_jerk_x = 10,10
  1830. machine_max_jerk_y = 10,10
  1831. machine_max_jerk_z = 0.2,0.4
  1832. machine_min_extruding_rate = 0,0
  1833. machine_min_travel_rate = 0,0
  1834. max_layer_height = 0
  1835. max_print_height = 80
  1836. min_layer_height = 0.07
  1837. nozzle_diameter = 0.4
  1838. parking_pos_retraction = 92
  1839. pause_print_gcode = M601
  1840. print_host =
  1841. printer_model =
  1842. printer_notes =
  1843. printer_settings_id =
  1844. printer_technology = FFF
  1845. printer_variant =
  1846. printer_vendor =
  1847. printhost_apikey =
  1848. printhost_cafile =
  1849. remaining_times = 0
  1850. retract_before_travel = 2
  1851. retract_before_wipe = 0%
  1852. retract_layer_change = 0
  1853. retract_length = 2
  1854. retract_length_toolchange = 10
  1855. retract_lift = 0
  1856. retract_lift_above = 0
  1857. retract_lift_below = 0
  1858. retract_restart_extra = 0
  1859. retract_restart_extra_toolchange = 0
  1860. retract_speed = 40
  1861. silent_mode = 0
  1862. single_extruder_multi_material = 0
  1863. start_gcode = G21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM107 ; start with the fan off\nM104 S[first_layer_temperature] ; begin heating nozzle\nM140 S[first_layer_bed_temperature] ; begin heating bed\nG28 ; home all axes, needed for mesh leveling!\nM420 S1 ; enable mesh bed leveling\nG1 Z10.0 F{travel_speed * 60} ; move the platform down 10mm\nG1 X40 Y40 F{travel_speed * 60} ; move to center to avoid tape edge\nM190 S[first_layer_bed_temperature] ; Wait for bed temp\nM109 S[first_layer_temperature] ; Wait for nozzle temp\nG92 E0 ; zero the extruded length\nG1 F200 E1 ; extrude 1mm of feed stock\nG92 E0 ; zero the extruded length again\nG1 F{travel_speed * 60} ; set default travel speed\n; Put printing message on LCD screen\nM117 Printing...
  1864. template_custom_gcode =
  1865. thumbnails =
  1866. thumbnails_format = PNG
  1867. toolchange_gcode =
  1868. use_firmware_retraction = 0
  1869. use_relative_e_distances = 0
  1870. use_volumetric_e = 0
  1871. variable_layer_height = 1
  1872. wipe = 0
  1873. z_offset = -0.2
  1874. [printer:Sparkmaker]
  1875. absolute_correction = 0
  1876. area_fill = 50
  1877. bed_custom_model =
  1878. bed_custom_texture =
  1879. bed_shape = 0x0,99.8169x0,99.8169x54.987,0x54.987
  1880. default_sla_material_profile = Prusa Orange Tough @0.05
  1881. default_sla_print_profile = 0.05 Normal
  1882. display_height = 54.987
  1883. display_mirror_x = 0
  1884. display_mirror_y = 0
  1885. display_orientation = landscape
  1886. display_pixels_x = 854
  1887. display_pixels_y = 480
  1888. display_width = 99.8169
  1889. elefant_foot_compensation = 0
  1890. elefant_foot_min_width = 0.2
  1891. fast_tilt_time = 5
  1892. gamma_correction = 1
  1893. high_viscosity_tilt_time = 10
  1894. host_type = octoprint
  1895. inherits = Original Prusa SL1
  1896. max_exposure_time = 150
  1897. max_initial_exposure_time = 300
  1898. max_print_height = 120
  1899. min_exposure_time = 1
  1900. min_initial_exposure_time = 1
  1901. print_host =
  1902. printer_model = SL1
  1903. printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n
  1904. printer_settings_id =
  1905. printer_technology = SLA
  1906. printer_variant = default
  1907. printer_vendor =
  1908. printhost_apikey =
  1909. printhost_cafile =
  1910. relative_correction = 1,1
  1911. relative_correction_x = 1
  1912. relative_correction_y = 1
  1913. relative_correction_z = 1
  1914. slow_tilt_time = 8
  1915. thumbnails = 400x400,800x480
  1916. [printer:i3 AM8]
  1917. bed_custom_model =
  1918. bed_custom_texture =
  1919. bed_shape = 0x0,220x0,220x210,0x210
  1920. before_layer_gcode =
  1921. between_objects_gcode =
  1922. color_change_gcode = M600
  1923. cooling_tube_length = 5
  1924. cooling_tube_retraction = 91.5
  1925. default_filament_profile =
  1926. default_print_profile =
  1927. deretract_speed = 0
  1928. end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off bed\n\nG91 ; relative positioning\nG1 E-4.0 F40 ; retract some filament\nG1 Z+2.0 E-6.0 F{travel_speed * 60} ; move z up and retract more\n\nG90 ; absolute positioning\nG0 X-5 Y200 ; move out of the way\nM84 ; disable motors\nM117 Finished!\n
  1929. extra_loading_move = -2
  1930. extruder_colour = ""
  1931. extruder_offset = 0x0
  1932. gcode_flavor = marlin
  1933. high_current_on_filament_swap = 0
  1934. host_type = octoprint
  1935. inherits =
  1936. layer_gcode =
  1937. machine_limits_usage = time_estimate_only
  1938. machine_max_acceleration_e = 10000,5000
  1939. machine_max_acceleration_extruding = 1500,1250
  1940. machine_max_acceleration_retracting = 1500,1250
  1941. machine_max_acceleration_travel = 1500,1250
  1942. machine_max_acceleration_x = 2000,1000
  1943. machine_max_acceleration_y = 2000,1000
  1944. machine_max_acceleration_z = 500,200
  1945. machine_max_feedrate_e = 120,120
  1946. machine_max_feedrate_x = 175,100
  1947. machine_max_feedrate_y = 175,100
  1948. machine_max_feedrate_z = 175,100
  1949. machine_max_jerk_e = 2.5,2.5
  1950. machine_max_jerk_x = 10,10
  1951. machine_max_jerk_y = 10,10
  1952. machine_max_jerk_z = 0.2,0.4
  1953. machine_min_extruding_rate = 0,0
  1954. machine_min_travel_rate = 0,0
  1955. max_layer_height = 0
  1956. max_print_height = 275
  1957. min_layer_height = 0.07
  1958. nozzle_diameter = 0.4
  1959. parking_pos_retraction = 92
  1960. pause_print_gcode = M601
  1961. print_host =
  1962. printer_model =
  1963. printer_notes =
  1964. printer_settings_id =
  1965. printer_technology = FFF
  1966. printer_variant =
  1967. printer_vendor =
  1968. printhost_apikey =
  1969. printhost_cafile =
  1970. remaining_times = 0
  1971. retract_before_travel = 2
  1972. retract_before_wipe = 0%
  1973. retract_layer_change = 0
  1974. retract_length = 2
  1975. retract_length_toolchange = 10
  1976. retract_lift = 0
  1977. retract_lift_above = 0
  1978. retract_lift_below = 0
  1979. retract_restart_extra = 0
  1980. retract_restart_extra_toolchange = 0
  1981. retract_speed = 40
  1982. silent_mode = 1
  1983. single_extruder_multi_material = 0
  1984. start_gcode = ; Pre-Heat Bed\n;M140 S35 ; start heating bed\n;M140 S[first_layer_bed_temperature] ; start heating bed\n\n; Initial Settings\nG21 ; metric\nG90 ; absolute positioning\nM82 ; extruder absolute\nM107 ; fan off\n\n; Homing\n;G28 ; home all axes\n;G0 Z25 F{travel_speed * 60} ; lift nozzle\n;G0 X-5 Y0 F{travel_speed * 60} ; move to xy origin\n\n; Bed Leveling\nG29 ; perform auto bed leveling\nG0 Z25 F{travel_speed * 60} ; lift nozzle\nG0 X-5 Y0 F{travel_speed * 60} ; move to xy origin\n\n; Heating Extruder and Bed\n;M190 S35 ; wait for heating bed\nM140 S[first_layer_bed_temperature] ; start heating bed\nM104 S[first_layer_temperature] ; start heating extruder\nM190 S[first_layer_bed_temperature] ; wait for heating bed\nM109 S[first_layer_temperature] ; wait for heating extruder\n\n; Priming Line\n;G0 Z0.5 F{travel_speed * 60} ; move down nozzle\n;G0 X5 Y3 F{travel_speed * 60} ; move to start of line\n;G0 Z0.1 F{travel_speed * 60} ; move z down\n;G92 E0 ; zero extruder\n;G1 X60 E12.5 F600 ; start purge line\n;G1 X100 E15.0 F600 ; finish purge line\n;G1 X120 E12.5 F600 ; retract\nG92 E0 ; zero extruder\n;G0 Z5 F{travel_speed * 60} ; lift nozzle\n;G0 X100 Y100 ; move to center\nM117 Printing...\n
  1985. template_custom_gcode =
  1986. thumbnails =
  1987. thumbnails_format = PNG
  1988. toolchange_gcode =
  1989. use_firmware_retraction = 0
  1990. use_relative_e_distances = 0
  1991. use_volumetric_e = 0
  1992. variable_layer_height = 1
  1993. wipe = 0
  1994. z_offset = 0
  1995. [presets]
  1996. print = i3 AM8
  1997. sla_print = 0.1 Fast - Copy
  1998. sla_material = Prusa Orange Tough @0.1 - Copy
  1999. printer = Sparkmaker
  2000. filament = i3 AM8 PETG