My self-made 3D-printable designs, mainly in OpenSCAD
Du kan inte välja fler än 25 ämnen Ämnen måste starta med en bokstav eller siffra, kan innehålla bindestreck ('-') och vara max 35 tecken långa.

Cura_Beta_Fabrikator_Mini.json 2.3KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162
  1. {
  2. "id": "fabrikator-mini-bed",
  3. "name": "Fabrikator Mini",
  4. "version": 1,
  5. "inherits": "fdmprinter.json",
  6. "machine_settings": {
  7. "machine_width": {
  8. "default": 80
  9. },
  10. "machine_height": {
  11. "default": 80
  12. },
  13. "machine_depth": {
  14. "default": 80
  15. },
  16. "machine_center_is_zero": {
  17. "default": false
  18. },
  19. "machine_nozzle_size": {
  20. "default": 0.4
  21. },
  22. "machine_head_shape_min_x": {
  23. "default": 75
  24. },
  25. "machine_head_shape_min_y": {
  26. "default": 18
  27. },
  28. "machine_head_shape_max_x": {
  29. "default": 18
  30. },
  31. "machine_head_shape_max_y": {
  32. "default": 35
  33. },
  34. "machine_nozzle_gantry_distance": {
  35. "default": 55
  36. },
  37. "machine_nozzle_offset_x_1": {
  38. "default": 18
  39. },
  40. "machine_nozzle_offset_y_1": {
  41. "default": 0
  42. },
  43. "machine_gcode_flavor": {
  44. "default": "RepRap"
  45. },
  46. "machine_start_gcode": {
  47. "default": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nM104 S{print_temperature} ; begin heating nozzle\nG28 X0 Y0 ;move X/Y to min endstops\nM140 S{print_bed_temperature} ; begin heating bed\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E1 ;extrude 1mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
  48. },
  49. "machine_end_gcode": {
  50. "default": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
  51. }
  52. },
  53. "categories": {
  54. "material": {
  55. "settings": {
  56. "material_bed_temperature": {
  57. "visible": true
  58. }
  59. }
  60. }
  61. }
  62. }