Keine Beschreibung

Thomas Buck 465584fe85 Added Raspberry Pi config		vor 8 Jahren
board/olinuxino	Removed old unused files	vor 8 Jahren
buildroot @ ecf55c3f02	Initial commit	vor 8 Jahren
configs	Added Raspberry Pi config	vor 8 Jahren
.gitignore	Initial commit	vor 8 Jahren
.gitmodules	Initial commit	vor 8 Jahren
Config.in	Initial commit	vor 8 Jahren
README.md	Link to blog in Readme	vor 8 Jahren
build.sh	Added build script	vor 8 Jahren
external.mk	Initial commit	vor 8 Jahren
flash.sh	Added Raspberry Pi config	vor 8 Jahren

CamCorder-Buildroot

This is a buildroot project creating a bootable SD card Image for the Olimex iMX233-OLinuXino-Micro (and all other boards of this series).

U-Boot is used instead of the MXS-Bootlets to support SDHC cards. The current mainline Linux Kernel (4.4.1) has been used.

Getting started

To build, first load the configuration, edit it if neccessary, and run the build:

./build.sh olinuxino_defconfig
./build.sh menuconfig
./build.sh

If this succeeds, insert your SD card, find out it’s identifier, and run this (replace sdc with your disk!):

./flash.sh /dev/sdc

Then eject the card, insert it into the OLinuXino, apply power and watch the boot console on the Debug Serial port.

To clone this repository, enter the following:

git clone https://xythobuz.de/git/CaseLights.git
git submodule init
git submodule update

When pulling changes from this repository, you may need to update the submodule:

git submodule update

This is mostly based on the olinuxino_defconfig included with buildroot. To get U-Boot to compile for the OLinuXino, I included this patch from here.