暂无描述
您最多选择25个主题 主题必须以字母或数字开头,可以包含连字符 (-),并且长度不得超过35个字符
Thomas Buck 465584fe85 Added Raspberry Pi config 8 年前
board/olinuxino Removed old unused files 8 年前
buildroot @ ecf55c3f02 Initial commit 8 年前
configs Added Raspberry Pi config 8 年前
.gitignore Initial commit 8 年前
.gitmodules Initial commit 8 年前
Config.in Initial commit 8 年前
README.md Link to blog in Readme 8 年前
build.sh Added build script 8 年前
external.mk Initial commit 8 年前
flash.sh Added Raspberry Pi config 8 年前

README.md

CamCorder-Buildroot

This is a buildroot project creating a bootable SD card Image for the Olimex iMX233-OLinuXino-Micro (and all other boards of this series).

U-Boot is used instead of the MXS-Bootlets to support SDHC cards. The current mainline Linux Kernel (4.4.1) has been used.

For more informations, read my blog post about this project.

Getting started

To build, first load the configuration, edit it if neccessary, and run the build:

./build.sh olinuxino_defconfig
./build.sh menuconfig
./build.sh

If this succeeds, insert your SD card, find out it’s identifier, and run this (replace sdc with your disk!):

./flash.sh /dev/sdc

Then eject the card, insert it into the OLinuXino, apply power and watch the boot console on the Debug Serial port.

Working with Git Submodules

To clone this repository, enter the following:

git clone https://xythobuz.de/git/CaseLights.git
git submodule init
git submodule update

When pulling changes from this repository, you may need to update the submodule:

git submodule update

Sources

This is mostly based on the olinuxino_defconfig included with buildroot. To get U-Boot to compile for the OLinuXino, I included this patch from here.