Nav apraksta
Nevar pievienot vairāk kā 25 tēmas Tēmai ir jāsākas ar burtu vai ciparu, tā var saturēt domu zīmes ('-') un var būt līdz 35 simboliem gara.
Thomas Buck 6c21349297 Extended Raspi config, fixed flash.sh script 8 gadus atpakaļ
board/olinuxino Removed old unused files 8 gadus atpakaļ
buildroot @ ecf55c3f02 Initial commit 8 gadus atpakaļ
configs Extended Raspi config, fixed flash.sh script 8 gadus atpakaļ
.gitignore Initial commit 8 gadus atpakaļ
.gitmodules Initial commit 8 gadus atpakaļ
Config.in Initial commit 8 gadus atpakaļ
README.md Link to blog in Readme 8 gadus atpakaļ
build.sh Added build script 8 gadus atpakaļ
external.mk Initial commit 8 gadus atpakaļ
flash.sh Extended Raspi config, fixed flash.sh script 8 gadus atpakaļ

README.md

CamCorder-Buildroot

This is a buildroot project creating a bootable SD card Image for the Olimex iMX233-OLinuXino-Micro (and all other boards of this series).

U-Boot is used instead of the MXS-Bootlets to support SDHC cards. The current mainline Linux Kernel (4.4.1) has been used.

For more informations, read my blog post about this project.

Getting started

To build, first load the configuration, edit it if neccessary, and run the build:

./build.sh olinuxino_defconfig
./build.sh menuconfig
./build.sh

If this succeeds, insert your SD card, find out it’s identifier, and run this (replace sdc with your disk!):

./flash.sh /dev/sdc

Then eject the card, insert it into the OLinuXino, apply power and watch the boot console on the Debug Serial port.

Working with Git Submodules

To clone this repository, enter the following:

git clone https://xythobuz.de/git/CaseLights.git
git submodule init
git submodule update

When pulling changes from this repository, you may need to update the submodule:

git submodule update

Sources

This is mostly based on the olinuxino_defconfig included with buildroot. To get U-Boot to compile for the OLinuXino, I included this patch from here.