Без опису
Ви не можете вибрати більше 25 тем Теми мають розпочинатися з літери або цифри, можуть містити дефіси (-) і не повинні перевищувати 35 символів.
Thomas Buck 6c21349297 Extended Raspi config, fixed flash.sh script 8 роки тому
board/olinuxino Removed old unused files 8 роки тому
buildroot @ ecf55c3f02 Initial commit 8 роки тому
configs Extended Raspi config, fixed flash.sh script 8 роки тому
.gitignore Initial commit 8 роки тому
.gitmodules Initial commit 8 роки тому
Config.in Initial commit 8 роки тому
README.md Link to blog in Readme 8 роки тому
build.sh Added build script 8 роки тому
external.mk Initial commit 8 роки тому
flash.sh Extended Raspi config, fixed flash.sh script 8 роки тому

README.md

CamCorder-Buildroot

This is a buildroot project creating a bootable SD card Image for the Olimex iMX233-OLinuXino-Micro (and all other boards of this series).

U-Boot is used instead of the MXS-Bootlets to support SDHC cards. The current mainline Linux Kernel (4.4.1) has been used.

For more informations, read my blog post about this project.

Getting started

To build, first load the configuration, edit it if neccessary, and run the build:

./build.sh olinuxino_defconfig
./build.sh menuconfig
./build.sh

If this succeeds, insert your SD card, find out it’s identifier, and run this (replace sdc with your disk!):

./flash.sh /dev/sdc

Then eject the card, insert it into the OLinuXino, apply power and watch the boot console on the Debug Serial port.

Working with Git Submodules

To clone this repository, enter the following:

git clone https://xythobuz.de/git/CaseLights.git
git submodule init
git submodule update

When pulling changes from this repository, you may need to update the submodule:

git submodule update

Sources

This is mostly based on the olinuxino_defconfig included with buildroot. To get U-Boot to compile for the OLinuXino, I included this patch from here.