Преглед на файлове

Add'l PLR options, AVR strstr_P compat (#13880)

Tanguy Pruvot преди 5 години
родител
ревизия
11adcf1ce3
променени са 84 файла, в които са добавени 345 реда и са изтрити 169 реда
  1. 4
    2
      Marlin/Configuration_adv.h
  2. 7
    0
      Marlin/src/HAL/shared/Marduino.h
  3. 9
    1
      Marlin/src/feature/power_loss_recovery.cpp
  4. 2
    4
      Marlin/src/feature/power_loss_recovery.h
  5. 5
    5
      buildroot/share/tests/DUE-tests
  6. 3
    3
      buildroot/share/tests/LPC1768-tests
  7. 3
    3
      buildroot/share/tests/LPC1769-tests
  8. 2
    1
      buildroot/share/tests/STM32F1-tests
  9. 1
    1
      buildroot/share/tests/esp32-tests
  10. 1
    1
      buildroot/share/tests/megaatmega2560-tests
  11. 4
    2
      config/default/Configuration_adv.h
  12. 4
    2
      config/examples/3DFabXYZ/Migbot/Configuration_adv.h
  13. 4
    2
      config/examples/AlephObjects/TAZ4/Configuration_adv.h
  14. 4
    2
      config/examples/AliExpress/UM2pExt/Configuration_adv.h
  15. 4
    2
      config/examples/Anet/A2/Configuration_adv.h
  16. 4
    2
      config/examples/Anet/A2plus/Configuration_adv.h
  17. 4
    2
      config/examples/Anet/A6/Configuration_adv.h
  18. 4
    2
      config/examples/Anet/A8/Configuration_adv.h
  19. 4
    2
      config/examples/AnyCubic/i3/Configuration_adv.h
  20. 4
    2
      config/examples/ArmEd/Configuration_adv.h
  21. 4
    2
      config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
  22. 4
    2
      config/examples/BIBO/TouchX/default/Configuration_adv.h
  23. 4
    2
      config/examples/BQ/Hephestos/Configuration_adv.h
  24. 4
    2
      config/examples/BQ/Hephestos_2/Configuration_adv.h
  25. 4
    2
      config/examples/BQ/WITBOX/Configuration_adv.h
  26. 4
    2
      config/examples/Cartesio/Configuration_adv.h
  27. 4
    2
      config/examples/Creality/CR-10/Configuration_adv.h
  28. 4
    2
      config/examples/Creality/CR-10S/Configuration_adv.h
  29. 4
    2
      config/examples/Creality/CR-10_5S/Configuration_adv.h
  30. 4
    2
      config/examples/Creality/CR-10mini/Configuration_adv.h
  31. 4
    2
      config/examples/Creality/CR-8/Configuration_adv.h
  32. 4
    2
      config/examples/Creality/Ender-2/Configuration_adv.h
  33. 4
    2
      config/examples/Creality/Ender-3/Configuration_adv.h
  34. 4
    2
      config/examples/Creality/Ender-4/Configuration_adv.h
  35. 4
    2
      config/examples/Einstart-S/Configuration_adv.h
  36. 4
    2
      config/examples/Felix/Configuration_adv.h
  37. 4
    2
      config/examples/FlashForge/CreatorPro/Configuration_adv.h
  38. 4
    2
      config/examples/FolgerTech/i3-2020/Configuration_adv.h
  39. 4
    2
      config/examples/Formbot/Raptor/Configuration_adv.h
  40. 4
    2
      config/examples/Formbot/T_Rex_2+/Configuration_adv.h
  41. 4
    2
      config/examples/Formbot/T_Rex_3/Configuration_adv.h
  42. 8
    2
      config/examples/Geeetech/A10M/Configuration_adv.h
  43. 8
    2
      config/examples/Geeetech/A20M/Configuration_adv.h
  44. 4
    2
      config/examples/Geeetech/MeCreator2/Configuration_adv.h
  45. 4
    2
      config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
  46. 4
    2
      config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
  47. 4
    2
      config/examples/Infitary/i3-M508/Configuration_adv.h
  48. 4
    2
      config/examples/JGAurora/A5/Configuration_adv.h
  49. 4
    2
      config/examples/MakerParts/Configuration_adv.h
  50. 4
    2
      config/examples/Malyan/M150/Configuration_adv.h
  51. 4
    2
      config/examples/Malyan/M200/Configuration_adv.h
  52. 4
    2
      config/examples/Micromake/C1/enhanced/Configuration_adv.h
  53. 4
    2
      config/examples/Mks/Robin/Configuration_adv.h
  54. 4
    2
      config/examples/Mks/Sbase/Configuration_adv.h
  55. 4
    2
      config/examples/RapideLite/RL200/Configuration_adv.h
  56. 4
    2
      config/examples/RigidBot/Configuration_adv.h
  57. 4
    2
      config/examples/SCARA/Configuration_adv.h
  58. 4
    2
      config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
  59. 4
    2
      config/examples/Sanguinololu/Configuration_adv.h
  60. 4
    2
      config/examples/TheBorg/Configuration_adv.h
  61. 4
    2
      config/examples/TinyBoy2/Configuration_adv.h
  62. 4
    2
      config/examples/Tronxy/X3A/Configuration_adv.h
  63. 4
    2
      config/examples/Tronxy/X5S-2E/Configuration_adv.h
  64. 4
    2
      config/examples/UltiMachine/Archim1/Configuration_adv.h
  65. 4
    2
      config/examples/UltiMachine/Archim2/Configuration_adv.h
  66. 4
    2
      config/examples/VORONDesign/Configuration_adv.h
  67. 4
    2
      config/examples/Velleman/K8200/Configuration_adv.h
  68. 4
    2
      config/examples/Velleman/K8400/Configuration_adv.h
  69. 8
    2
      config/examples/WASP/PowerWASP/Configuration_adv.h
  70. 4
    2
      config/examples/Wanhao/Duplicator 6/Configuration_adv.h
  71. 4
    2
      config/examples/delta/Anycubic/Kossel/Configuration_adv.h
  72. 4
    2
      config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
  73. 4
    2
      config/examples/delta/FLSUN/kossel/Configuration_adv.h
  74. 4
    2
      config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
  75. 4
    2
      config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
  76. 4
    2
      config/examples/delta/MKS/SBASE/Configuration_adv.h
  77. 4
    2
      config/examples/delta/Tevo Little Monster/Configuration_adv.h
  78. 4
    2
      config/examples/delta/generic/Configuration_adv.h
  79. 4
    2
      config/examples/delta/kossel_mini/Configuration_adv.h
  80. 4
    2
      config/examples/delta/kossel_xl/Configuration_adv.h
  81. 4
    2
      config/examples/gCreate/gMax1.5+/Configuration_adv.h
  82. 4
    2
      config/examples/makibox/Configuration_adv.h
  83. 4
    2
      config/examples/tvrrug/Round2/Configuration_adv.h
  84. 4
    2
      config/examples/wt150/Configuration_adv.h

+ 4
- 2
Marlin/Configuration_adv.h Целия файл

@@ -851,8 +851,10 @@
851 851
    */
852 852
   //#define POWER_LOSS_RECOVERY
853 853
   #if ENABLED(POWER_LOSS_RECOVERY)
854
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
855
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
854
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss (optional)
855
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
856
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
857
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
856 858
 
857 859
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
858 860
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 7
- 0
Marlin/src/HAL/shared/Marduino.h Целия файл

@@ -48,3 +48,10 @@
48 48
 #ifndef CBI
49 49
   #define CBI(A,B) (A &= ~(1 << (B)))
50 50
 #endif
51
+
52
+#ifndef __AVR__
53
+  #ifndef strchr_P // Some platforms define a macro (DUE, teensy35)
54
+    inline const char* strchr_P(const char *s, int c) { return strchr(s,c); }
55
+    //#define strchr_P(s,c) strchr(s,c)
56
+  #endif
57
+#endif

+ 9
- 1
Marlin/src/feature/power_loss_recovery.cpp Целия файл

@@ -55,6 +55,13 @@ job_recovery_info_t PrintJobRecovery::info;
55 55
 
56 56
 PrintJobRecovery recovery;
57 57
 
58
+#ifndef POWER_LOSS_PURGE_LEN
59
+  #define POWER_LOSS_PURGE_LEN 0
60
+#endif
61
+#ifndef POWER_LOSS_RETRACT_LEN
62
+  #define POWER_LOSS_RETRACT_LEN 0
63
+#endif
64
+
58 65
 /**
59 66
  * Clear the recovery info
60 67
  */
@@ -340,8 +347,9 @@ void PrintJobRecovery::resume() {
340 347
     //gcode.process_subcommands_now(cmd);
341 348
     gcode.process_subcommands_now_P(PSTR("G1 E" STRINGIFY(POWER_LOSS_PURGE_LEN) " F200"));
342 349
   #endif
350
+
343 351
   #if POWER_LOSS_RETRACT_LEN
344
-    sprintf_P(cmd, PSTR("G1 E%d F3000"), POWER_LOSS_PURGE_LEN - POWER_LOSS_RETRACT_LEN);
352
+    sprintf_P(cmd, PSTR("G1 E%d F3000"), POWER_LOSS_PURGE_LEN - (POWER_LOSS_RETRACT_LEN));
345 353
     gcode.process_subcommands_now(cmd);
346 354
   #endif
347 355
 

+ 2
- 4
Marlin/src/feature/power_loss_recovery.h Целия файл

@@ -32,11 +32,9 @@
32 32
   #include "../feature/mixing.h"
33 33
 #endif
34 34
 
35
-#define SAVE_INFO_INTERVAL_MS 0
36
-//#define SAVE_EACH_CMD_MODE
37 35
 //#define DEBUG_POWER_LOSS_RECOVERY
38
-#define POWER_LOSS_PURGE_LEN 20
39
-#define POWER_LOSS_RETRACT_LEN 10
36
+//#define SAVE_EACH_CMD_MODE
37
+//#define SAVE_INFO_INTERVAL_MS 0
40 38
 
41 39
 typedef struct {
42 40
   uint8_t valid_head;

+ 5
- 5
buildroot/share/tests/DUE-tests Целия файл

@@ -8,10 +8,10 @@ set -e
8 8
 
9 9
 restore_configs
10 10
 opt_set MOTHERBOARD BOARD_RAMPS4DUE_EFB
11
-opt_enable S_CURVE_ACCELERATION EEPROM_SETTINGS
11
+opt_enable S_CURVE_ACCELERATION EEPROM_SETTINGS GCODE_MACROS
12 12
 opt_set E0_AUTO_FAN_PIN 8
13 13
 opt_set EXTRUDER_AUTO_FAN_SPEED 100
14
-exec_test $1 $2 "RAMPS4DUE_EFB S_CURVE_ACCELERATION EEPROM_SETTINGS"
14
+exec_test $1 $2 "RAMPS4DUE_EFB with S_CURVE_ACCELERATION, EEPROM_SETTINGS, GCODE_MACROS"
15 15
 
16 16
 restore_configs
17 17
 opt_set MOTHERBOARD BOARD_RADDS
@@ -23,7 +23,7 @@ pins_set RAMPS X_MAX_PIN -1
23 23
 pins_set RAMPS Y_MAX_PIN -1
24 24
 opt_add Z2_MAX_PIN 2
25 25
 opt_add Z3_MAX_PIN 3
26
-exec_test $1 $2 "Test RADDS with Z_TRIPLE_STEPPER_DRIVERS and Z_STEPPER_AUTO_ALIGN"
26
+exec_test $1 $2 "RADDS with Z_TRIPLE_STEPPER_DRIVERS and Z_STEPPER_AUTO_ALIGN"
27 27
 
28 28
 #
29 29
 # Test SWITCHING_EXTRUDER
@@ -32,5 +32,5 @@ restore_configs
32 32
 opt_set MOTHERBOARD BOARD_RAMPS4DUE_EEF
33 33
 opt_set EXTRUDERS 2
34 34
 opt_set NUM_SERVOS 1
35
-opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER BEEP_ON_FEEDRATE_CHANGE
36
-exec_test $1 $2 "Test RAMPS4DUE with SWITCHING_EXTRUDER"
35
+opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER BEEP_ON_FEEDRATE_CHANGE POWER_LOSS_RECOVERY
36
+exec_test $1 $2 "RAMPS4DUE_EEF with SWITCHING_EXTRUDER, POWER_LOSS_RECOVERY"

+ 3
- 3
buildroot/share/tests/LPC1768-tests Целия файл

@@ -38,10 +38,10 @@ opt_set TEMP_SENSOR_1 -1
38 38
 opt_set TEMP_SENSOR_BED 5
39 39
 opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
40 40
            FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY PID_EXTRUSION_SCALING \
41
-           FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
41
+           FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
42 42
            BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
43 43
            PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
44
-           ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
44
+           Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
45 45
            LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA
46 46
 opt_set GRID_MAX_POINTS_X 16
47 47
 exec_test $1 $2 "MKS SBASE Many Features"
@@ -53,7 +53,7 @@ opt_enable COREYX USE_XMAX_PLUG DAC_MOTOR_CURRENT_DEFAULT \
53 53
            AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 EEPROM_SETTINGS \
54 54
            FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR FAN_SOFT_PWM \
55 55
            SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME \
56
-           ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK \
56
+           ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK GCODE_MACROS \
57 57
            VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \
58 58
            EXTRA_FAN_SPEED FWRETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS \
59 59
            MENU_ADDAUTOSTART SDCARD_SORT_ALPHA

+ 3
- 3
buildroot/share/tests/LPC1769-tests Целия файл

@@ -16,10 +16,10 @@ opt_set EXTRUDERS 2
16 16
 opt_set TEMP_SENSOR_1 -1
17 17
 opt_set TEMP_SENSOR_BED 5
18 18
 opt_enable VIKI2 SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
19
-           FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
19
+           FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
20 20
            BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
21 21
            PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
22
-           ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
22
+           Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
23 23
            LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA
24 24
 opt_set GRID_MAX_POINTS_X 16
25 25
 exec_test $1 $2 "Smoothieboard Many Features"
@@ -31,7 +31,7 @@ opt_enable COREYX USE_XMAX_PLUG DAC_MOTOR_CURRENT_DEFAULT \
31 31
            AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 EEPROM_SETTINGS \
32 32
            FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR FAN_SOFT_PWM \
33 33
            SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME \
34
-           ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK \
34
+           ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK GCODE_MACROS \
35 35
            VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \
36 36
            EXTRA_FAN_SPEED FWRETRACT MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
37 37
 opt_set FAN_MIN_PWM 50

+ 2
- 1
buildroot/share/tests/STM32F1-tests Целия файл

@@ -10,7 +10,8 @@ restore_configs
10 10
 opt_set MOTHERBOARD BOARD_STM32F1R
11 11
 opt_set EXTRUDERS 2
12 12
 opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT \
13
-           PAREN_COMMENTS GCODE_MOTION_MODES SINGLENOZZLE TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_PARK
13
+           PAREN_COMMENTS GCODE_MOTION_MODES SINGLENOZZLE TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_PARK \
14
+           GCODE_MACROS
14 15
 exec_test $1 $2 "STM32F1R EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT PAREN_COMMENTS GCODE_MOTION_MODES"
15 16
 
16 17
 # cleanup

+ 1
- 1
buildroot/share/tests/esp32-tests Целия файл

@@ -8,7 +8,7 @@ set -e
8 8
 
9 9
 restore_configs
10 10
 opt_set MOTHERBOARD BOARD_ESP32
11
-opt_enable WIFISUPPORT
11
+opt_enable WIFISUPPORT GCODE_MACROS
12 12
 opt_set "WIFI_SSID \"ssid\""
13 13
 opt_set "WIFI_PWD \"password\""
14 14
 opt_set TX_BUFFER_SIZE 64

+ 1
- 1
buildroot/share/tests/megaatmega2560-tests Целия файл

@@ -58,7 +58,7 @@ opt_set TEMP_SENSOR_3 20
58 58
 opt_set TEMP_SENSOR_4 1000
59 59
 opt_set TEMP_SENSOR_BED 1
60 60
 opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION \
61
-           EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT \
61
+           EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT GCODE_MACROS \
62 62
            USB_FLASH_DRIVE_SUPPORT SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI \
63 63
            CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION
64 64
 exec_test $1 $2 "Azteeg X3 with 5 extruders, RRDFGSC, probeless UBL, Linear Advance, and more"

+ 4
- 2
config/default/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20   // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10   // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/3DFabXYZ/Migbot/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/AlephObjects/TAZ4/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/AliExpress/UM2pExt/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Anet/A2/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Anet/A2plus/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Anet/A6/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Anet/A8/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/AnyCubic/i3/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/ArmEd/Configuration_adv.h Целия файл

@@ -857,8 +857,10 @@
857 857
    */
858 858
   //#define POWER_LOSS_RECOVERY
859 859
   #if ENABLED(POWER_LOSS_RECOVERY)
860
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
861
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
860
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
861
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
862
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
863
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
862 864
 
863 865
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
864 866
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/BIBO/TouchX/default/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/BQ/Hephestos/Configuration_adv.h Целия файл

@@ -850,8 +850,10 @@
850 850
    */
851 851
   //#define POWER_LOSS_RECOVERY
852 852
   #if ENABLED(POWER_LOSS_RECOVERY)
853
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
854
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
853
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
854
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
855
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
856
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
855 857
 
856 858
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
857 859
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/BQ/Hephestos_2/Configuration_adv.h Целия файл

@@ -858,8 +858,10 @@
858 858
    */
859 859
   //#define POWER_LOSS_RECOVERY
860 860
   #if ENABLED(POWER_LOSS_RECOVERY)
861
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
862
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
861
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
862
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
863
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
864
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
863 865
 
864 866
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
865 867
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/BQ/WITBOX/Configuration_adv.h Целия файл

@@ -850,8 +850,10 @@
850 850
    */
851 851
   //#define POWER_LOSS_RECOVERY
852 852
   #if ENABLED(POWER_LOSS_RECOVERY)
853
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
854
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
853
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
854
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
855
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
856
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
855 857
 
856 858
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
857 859
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Cartesio/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Creality/CR-10/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Creality/CR-10S/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Creality/CR-10_5S/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Creality/CR-10mini/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Creality/CR-8/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Creality/Ender-2/Configuration_adv.h Целия файл

@@ -850,8 +850,10 @@
850 850
    */
851 851
   //#define POWER_LOSS_RECOVERY
852 852
   #if ENABLED(POWER_LOSS_RECOVERY)
853
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
854
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
853
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
854
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
855
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
856
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
855 857
 
856 858
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
857 859
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Creality/Ender-3/Configuration_adv.h Целия файл

@@ -850,8 +850,10 @@
850 850
    */
851 851
   //#define POWER_LOSS_RECOVERY
852 852
   #if ENABLED(POWER_LOSS_RECOVERY)
853
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
854
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
853
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
854
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
855
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
856
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
855 857
 
856 858
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
857 859
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Creality/Ender-4/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Einstart-S/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Felix/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/FlashForge/CreatorPro/Configuration_adv.h Целия файл

@@ -849,8 +849,10 @@
849 849
    */
850 850
   //#define POWER_LOSS_RECOVERY
851 851
   #if ENABLED(POWER_LOSS_RECOVERY)
852
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
853
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
852
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
853
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
854
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
855
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
854 856
 
855 857
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
856 858
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/FolgerTech/i3-2020/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Formbot/Raptor/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Formbot/T_Rex_2+/Configuration_adv.h Целия файл

@@ -857,8 +857,10 @@
857 857
    */
858 858
   //#define POWER_LOSS_RECOVERY
859 859
   #if ENABLED(POWER_LOSS_RECOVERY)
860
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
861
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
860
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
861
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
862
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
863
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
862 864
 
863 865
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
864 866
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Formbot/T_Rex_3/Configuration_adv.h Целия файл

@@ -857,8 +857,10 @@
857 857
    */
858 858
   //#define POWER_LOSS_RECOVERY
859 859
   #if ENABLED(POWER_LOSS_RECOVERY)
860
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
861
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
860
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
861
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
862
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
863
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
862 864
 
863 865
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
864 866
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 8
- 2
config/examples/Geeetech/A10M/Configuration_adv.h Целия файл

@@ -853,8 +853,14 @@
853 853
    */
854 854
   #define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    #define POWER_LOSS_PIN   69     // Pin to detect power loss
857
-    #define POWER_LOSS_STATE LOW    // State of pin indicating power loss
856
+    #define POWER_LOSS_PIN           69 // Pin to detect power loss
857
+    #define POWER_LOSS_STATE        LOW // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
860
+
861
+    // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
862
+    // especially with "vase mode" printing. Set too high and vases cannot be continued.
863
+    #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
858 864
   #endif
859 865
 
860 866
   /**

+ 8
- 2
config/examples/Geeetech/A20M/Configuration_adv.h Целия файл

@@ -853,8 +853,14 @@
853 853
    */
854 854
   #define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    #define POWER_LOSS_PIN   69     // Pin to detect power loss
857
-    #define POWER_LOSS_STATE LOW    // State of pin indicating power loss
856
+    #define POWER_LOSS_PIN           69 // Pin to detect power loss
857
+    #define POWER_LOSS_STATE        LOW // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
860
+
861
+    // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
862
+    // especially with "vase mode" printing. Set too high and vases cannot be continued.
863
+    #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
858 864
   #endif
859 865
 
860 866
   /**

+ 4
- 2
config/examples/Geeetech/MeCreator2/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Infitary/i3-M508/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/JGAurora/A5/Configuration_adv.h Целия файл

@@ -850,8 +850,10 @@
850 850
    */
851 851
   //#define POWER_LOSS_RECOVERY
852 852
   #if ENABLED(POWER_LOSS_RECOVERY)
853
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
854
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
853
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
854
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
855
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
856
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
855 857
 
856 858
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
857 859
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/MakerParts/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Malyan/M150/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Malyan/M200/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Micromake/C1/enhanced/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Mks/Robin/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Mks/Sbase/Configuration_adv.h Целия файл

@@ -854,8 +854,10 @@
854 854
    */
855 855
   //#define POWER_LOSS_RECOVERY
856 856
   #if ENABLED(POWER_LOSS_RECOVERY)
857
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
858
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
857
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
858
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
859
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
860
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
859 861
 
860 862
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
861 863
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/RapideLite/RL200/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/RigidBot/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/SCARA/Configuration_adv.h Целия файл

@@ -850,8 +850,10 @@
850 850
    */
851 851
   //#define POWER_LOSS_RECOVERY
852 852
   #if ENABLED(POWER_LOSS_RECOVERY)
853
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
854
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
853
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
854
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
855
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
856
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
855 857
 
856 858
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
857 859
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h Целия файл

@@ -850,8 +850,10 @@
850 850
    */
851 851
   //#define POWER_LOSS_RECOVERY
852 852
   #if ENABLED(POWER_LOSS_RECOVERY)
853
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
854
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
853
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
854
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
855
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
856
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
855 857
 
856 858
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
857 859
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Sanguinololu/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/TheBorg/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/TinyBoy2/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Tronxy/X3A/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Tronxy/X5S-2E/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/UltiMachine/Archim1/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/UltiMachine/Archim2/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/VORONDesign/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Velleman/K8200/Configuration_adv.h Целия файл

@@ -866,8 +866,10 @@
866 866
    */
867 867
   //#define POWER_LOSS_RECOVERY
868 868
   #if ENABLED(POWER_LOSS_RECOVERY)
869
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
870
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
869
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
870
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
871
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
872
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
871 873
 
872 874
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
873 875
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/Velleman/K8400/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 8
- 2
config/examples/WASP/PowerWASP/Configuration_adv.h Целия файл

@@ -853,8 +853,14 @@
853 853
    */
854 854
   #define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    #define POWER_LOSS_PIN   65    // Pin to detect power loss
857
-    #define POWER_LOSS_STATE LOW   // State of pin indicating power loss
856
+    #define POWER_LOSS_PIN           65 // Pin to detect power loss
857
+    #define POWER_LOSS_STATE        LOW // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
860
+
861
+    // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
862
+    // especially with "vase mode" printing. Set too high and vases cannot be continued.
863
+    #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
858 864
   #endif
859 865
 
860 866
   /**

+ 4
- 2
config/examples/Wanhao/Duplicator 6/Configuration_adv.h Целия файл

@@ -852,8 +852,10 @@
852 852
    */
853 853
   //#define POWER_LOSS_RECOVERY
854 854
   #if ENABLED(POWER_LOSS_RECOVERY)
855
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
856
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
855
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
856
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
857
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
858
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
857 859
 
858 860
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
859 861
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/delta/Anycubic/Kossel/Configuration_adv.h Целия файл

@@ -852,8 +852,10 @@
852 852
    */
853 853
   //#define POWER_LOSS_RECOVERY
854 854
   #if ENABLED(POWER_LOSS_RECOVERY)
855
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
856
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
855
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
856
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
857
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
858
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
857 859
 
858 860
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
859 861
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h Целия файл

@@ -852,8 +852,10 @@
852 852
    */
853 853
   //#define POWER_LOSS_RECOVERY
854 854
   #if ENABLED(POWER_LOSS_RECOVERY)
855
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
856
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
855
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
856
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
857
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
858
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
857 859
 
858 860
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
859 861
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/delta/FLSUN/kossel/Configuration_adv.h Целия файл

@@ -852,8 +852,10 @@
852 852
    */
853 853
   //#define POWER_LOSS_RECOVERY
854 854
   #if ENABLED(POWER_LOSS_RECOVERY)
855
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
856
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
855
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
856
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
857
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
858
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
857 859
 
858 860
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
859 861
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h Целия файл

@@ -852,8 +852,10 @@
852 852
    */
853 853
   //#define POWER_LOSS_RECOVERY
854 854
   #if ENABLED(POWER_LOSS_RECOVERY)
855
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
856
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
855
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
856
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
857
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
858
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
857 859
 
858 860
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
859 861
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h Целия файл

@@ -852,8 +852,10 @@
852 852
    */
853 853
   //#define POWER_LOSS_RECOVERY
854 854
   #if ENABLED(POWER_LOSS_RECOVERY)
855
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
856
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
855
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
856
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
857
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
858
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
857 859
 
858 860
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
859 861
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/delta/MKS/SBASE/Configuration_adv.h Целия файл

@@ -852,8 +852,10 @@
852 852
    */
853 853
   //#define POWER_LOSS_RECOVERY
854 854
   #if ENABLED(POWER_LOSS_RECOVERY)
855
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
856
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
855
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
856
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
857
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
858
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
857 859
 
858 860
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
859 861
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/delta/Tevo Little Monster/Configuration_adv.h Целия файл

@@ -852,8 +852,10 @@
852 852
    */
853 853
   //#define POWER_LOSS_RECOVERY
854 854
   #if ENABLED(POWER_LOSS_RECOVERY)
855
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
856
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
855
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
856
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
857
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
858
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
857 859
 
858 860
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
859 861
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/delta/generic/Configuration_adv.h Целия файл

@@ -852,8 +852,10 @@
852 852
    */
853 853
   //#define POWER_LOSS_RECOVERY
854 854
   #if ENABLED(POWER_LOSS_RECOVERY)
855
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
856
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
855
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
856
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
857
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
858
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
857 859
 
858 860
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
859 861
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/delta/kossel_mini/Configuration_adv.h Целия файл

@@ -851,8 +851,10 @@
851 851
    */
852 852
   //#define POWER_LOSS_RECOVERY
853 853
   #if ENABLED(POWER_LOSS_RECOVERY)
854
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
855
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
854
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
855
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
856
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
857
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
856 858
 
857 859
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
858 860
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/delta/kossel_xl/Configuration_adv.h Целия файл

@@ -852,8 +852,10 @@
852 852
    */
853 853
   //#define POWER_LOSS_RECOVERY
854 854
   #if ENABLED(POWER_LOSS_RECOVERY)
855
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
856
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
855
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
856
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
857
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
858
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
857 859
 
858 860
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
859 861
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/gCreate/gMax1.5+/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/makibox/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/tvrrug/Round2/Configuration_adv.h Целия файл

@@ -853,8 +853,10 @@
853 853
    */
854 854
   //#define POWER_LOSS_RECOVERY
855 855
   #if ENABLED(POWER_LOSS_RECOVERY)
856
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
857
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
856
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
857
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
858
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
859
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
858 860
 
859 861
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
860 862
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

+ 4
- 2
config/examples/wt150/Configuration_adv.h Целия файл

@@ -854,8 +854,10 @@
854 854
    */
855 855
   //#define POWER_LOSS_RECOVERY
856 856
   #if ENABLED(POWER_LOSS_RECOVERY)
857
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
858
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
857
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
858
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
859
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
860
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
859 861
 
860 862
     // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
861 863
     // especially with "vase mode" printing. Set too high and vases cannot be continued.

Loading…
Отказ
Запис