thomas
/
marlin
Tarkkaile 1
Äänestä 0
Fork 0
Koodi Ongelmat 0 Pull-pyynnöt 0 Julkaisut 0 Wiki Activity
Selaa lähdekoodia

Merge pull request #5244 from thinkyhead/rc_danish_nov_2016 

Update to Danish language 10/11-2016
Scott Lahteine 8 vuotta sitten
vanhempi
d08867986e 6eb6f12c64
commit
32247c1b80
11 muutettua tiedostoa jossa 99 lisäystä ja 93 poistoa
Jaettu näkymä Näytä diff tilastot
  1. 1
    1
      Marlin/language_cz.h
  2. 42
    35
      Marlin/language_da.h
  3. 1
    1
      Marlin/language_de.h
  4. 1
    1
      Marlin/language_el.h
  5. 1
    1
      Marlin/language_en.h
  6. 1
    2
      Marlin/language_fr.h
  7. 35
    35
      Marlin/language_gl.h
  8. 1
    1
      Marlin/language_it.h
  9. 13
    13
      Marlin/language_kana.h
  10. 1
    1
      Marlin/language_tr.h
  11. 2
    2
      Marlin/ultralcd_impl_HD44780.h

+ 1
- 1
Marlin/language_cz.h Näytä tiedosto 

@@ -188,7 +188,7 @@
188 188 
 #define MSG_INFO_EXTRUDERS                  "Extrudery"
189 189 
 #define MSG_INFO_BAUDRATE                   "Rychlost"
190 190 
 #define MSG_INFO_PROTOCOL                   "Protokol"
191 
-#if LCD_WIDTH > 19
191 
+#if LCD_WIDTH >= 20
192 192 
   #define MSG_INFO_PRINT_COUNT              "Pocet tisku"
193 193 
   #define MSG_INFO_COMPLETED_PRINTS         "Dokonceno"
194 194 
   #define MSG_INFO_PRINT_TIME               "Celkovy cas"

+ 42
- 35
Marlin/language_da.h Näytä tiedosto 

@@ -31,6 +31,8 @@
31 31 
 #define LANGUAGE_DA_H
32 32
33 33 
 #define MAPPER_C2C3
34 
+// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
35 
+//#define SIMULATE_ROMFONT
34 36 
 #define DISPLAY_CHARSET_ISO10646_1
35 37
36 38 
 #define WELCOME_MSG                         MACHINE_NAME " er klar"
 
@@ -113,7 +115,7 @@
113 115 
 #define MSG_TEMPERATURE                     "Temperatur"
114 116 
 #define MSG_MOTION                          "Bevægelse"
115 117 
 #define MSG_VOLUMETRIC                      "Filament"
116 
-#define MSG_VOLUMETRIC_ENABLED              "E in mm3"
118 
+#define MSG_VOLUMETRIC_ENABLED              "E i mm3"
117 119 
 #define MSG_FILAMENT_DIAM                   "Fil. Dia."
118 120 
 #define MSG_CONTRAST                        "LCD kontrast"
119 121 
 #define MSG_STORE_EPROM                     "Gem i EEPROM"
 
@@ -140,13 +142,15 @@
140 142 
 #define MSG_CONTROL_RETRACTF                "Tilbagetræk V"
141 143 
 #define MSG_CONTROL_RETRACT_ZLIFT           "Hop mm"
142 144 
 #define MSG_CONTROL_RETRACT_RECOVER         "UnRet +mm"
143 
-#define MSG_CONTROL_RETRACT_RECOVER_SWAP    "S UnRet+mm"
145 
+#define MSG_CONTROL_RETRACT_RECOVER_SWAP    "Skift UnRet+mm"
144 146 
 #define MSG_CONTROL_RETRACT_RECOVERF        "UnRet  V"
145 147 
 #define MSG_AUTORETRACT                     "AutoRetr."
146 148 
 #define MSG_FILAMENTCHANGE                  "Skift filament"
147 149 
 #define MSG_INIT_SDCARD                     "Init. SD card"
148 150 
 #define MSG_CNG_SDCARD                      "Skift SD kort"
149 151 
 #define MSG_ZPROBE_OUT                      "Probe udenfor plade"
152 
+#define MSG_BLTOUCH_SELFTEST                "BLTouch Selv-Test"
153 
+#define MSG_BLTOUCH_RESET                   "Reset BLTouch"
150 154 
 #define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
151 155 
 #define MSG_FIRST                           "først"
152 156 
 #define MSG_ZPROBE_ZOFFSET                  "Z Offset"
 
@@ -157,15 +161,16 @@
157 161 
 #define MSG_HEATING_FAILED_LCD              "Opvarmning fejlet"
158 162 
 #define MSG_ERR_REDUNDANT_TEMP              "Fejl: reserve temp"
159 163 
 #define MSG_THERMAL_RUNAWAY                 "Temp løber løbsk"
160 
-#define MSG_ERR_MAXTEMP                     "Fejl: MAKSTEMP"
161 
-#define MSG_ERR_MINTEMP                     "Fejl: MINTEMP"
162 
-#define MSG_ERR_MAXTEMP_BED                 "Fejl: MAKSTEMP PLADE"
163 
-#define MSG_ERR_MINTEMP_BED                 "Fejl: MINTEMP PLADE"
164 
-#define MSG_HALTED                          "PRINTER HALTED"
165 
-#define MSG_PLEASE_RESET                    "Reset venligst"
166 
-#define MSG_SHORT_DAY                       "d" // One character only
167 
-#define MSG_SHORT_HOUR                      "h" // One character only
168 
-#define MSG_SHORT_MINUTE                    "m" // One character only
164 
+#define MSG_ERR_MAXTEMP                     "Fejl: Maks temp"
165 
+#define MSG_ERR_MINTEMP                     "Fejl: Min temp"
166 
+#define MSG_ERR_MAXTEMP_BED                 "Fejl: Maks Plade temp"
167 
+#define MSG_ERR_MINTEMP_BED                 "Fejl: Min Plade temp"
168 
+#define MSG_ERR_Z_HOMING                    "G28 Z Forbudt"
169 
+#define MSG_HALTED                          "PRINTER STOPPET"
170 
+#define MSG_PLEASE_RESET                    "Reset Venligst"
171 
+#define MSG_SHORT_DAY                       "d" // Kun et bogstav
172 
+#define MSG_SHORT_HOUR                      "h" // Kun et bogstav
173 
+#define MSG_SHORT_MINUTE                    "m" // Kun et bogstav
169 174 
 #define MSG_HEATING                         "Opvarmer..."
170 175 
 #define MSG_HEATING_COMPLETE                "Opvarmet"
171 176 
 #define MSG_BED_HEATING                     "Opvarmer plade"
 
@@ -178,19 +183,19 @@
178 183
179 184 
 #define MSG_INFO_MENU                       "Om Printer"
180 185 
 #define MSG_INFO_PRINTER_MENU               "Printer Info"
181 
-#define MSG_INFO_STATS_MENU                 "Printer Stat."
182 
-#define MSG_INFO_BOARD_MENU                 "Board Info"
186 
+#define MSG_INFO_STATS_MENU                 "Printer Stats"
187 
+#define MSG_INFO_BOARD_MENU                 "Kort Info"
183 188 
 #define MSG_INFO_THERMISTOR_MENU            "Thermistors"
184 
-#define MSG_INFO_EXTRUDERS                  "Extrudere"
189 
+#define MSG_INFO_EXTRUDERS                  "Extruders"
185 190 
 #define MSG_INFO_BAUDRATE                   "Baud"
186 191 
 #define MSG_INFO_PROTOCOL                   "Protocol"
187 192
188 
-#if LCD_WIDTH > 19
189 
-  #define MSG_INFO_PRINT_COUNT              "Antal Print"
193 
+#if LCD_WIDTH >= 20
194 
+  #define MSG_INFO_PRINT_COUNT              "Ant. Prints"
190 195 
   #define MSG_INFO_COMPLETED_PRINTS         "Færdige"
191 196 
   #define MSG_INFO_PRINT_TIME               "Total print tid"
192 
-  #define MSG_INFO_PRINT_LONGEST            "Længste print tid"
193 
-  #define MSG_INFO_PRINT_FILAMENT           "Total extruderet"
197 
+  #define MSG_INFO_PRINT_LONGEST            "Længste print"
198 
+  #define MSG_INFO_PRINT_FILAMENT           "Total Extruderet"
194 199 
 #else
195 200 
   #define MSG_INFO_PRINT_COUNT              "Prints"
196 201 
   #define MSG_INFO_COMPLETED_PRINTS         "Færdige"
 
@@ -201,36 +206,38 @@
201 206
202 207 
 #define MSG_INFO_MIN_TEMP                   "Min Temp"
203 208 
 #define MSG_INFO_MAX_TEMP                   "Max Temp"
204 
-#define MSG_INFO_PSU                        "Strømforsyning"
209 
+#define MSG_INFO_PSU                        "Strømfors."
205 210
211 
+#define MSG_DRIVE_STRENGTH                  "Driv Styrke"
212 
+#define MSG_DAC_PERCENT                     "Driv %"
213 
+#define MSG_DAC_EEPROM_WRITE                "DAC EEPROM Skriv"
206 214 
 #define MSG_FILAMENT_CHANGE_HEADER          "SKIFT FILAMENT"
207 
-#define MSG_FILAMENT_CHANGE_OPTION_HEADER   "SKIFTE MULIGHEDER:"
215 
+#define MSG_FILAMENT_CHANGE_OPTION_HEADER   "Skift muligheder:"
208 216 
 #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "Extruder mere"
209 
-#define MSG_FILAMENT_CHANGE_OPTION_RESUME   "forsæt print"
217 
+#define MSG_FILAMENT_CHANGE_OPTION_RESUME   "Forsæt print"
210 218
211 219 
 #if LCD_HEIGHT >= 4
212 
-  #define MSG_FILAMENT_CHANGE_INIT_1          "Vent på"
213 
-  #define MSG_FILAMENT_CHANGE_INIT_2          "skift af "
214 
-  #define MSG_FILAMENT_CHANGE_INIT_3          "filament"
220 
+  #define MSG_FILAMENT_CHANGE_INIT_1          "Vent på start"
221 
+  #define MSG_FILAMENT_CHANGE_INIT_2          "af filament"
222 
+  #define MSG_FILAMENT_CHANGE_INIT_3          "skift"
215 223 
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Vent på"
216 
-  #define MSG_FILAMENT_CHANGE_UNLOAD_2        "filament tømning"
217 
-  #define MSG_FILAMENT_CHANGE_INSERT_1        "indsæt filament"
218 
-  #define MSG_FILAMENT_CHANGE_INSERT_2        "og tryk for"
219 
-  #define MSG_FILAMENT_CHANGE_INSERT_3        "at fortsætte..."
224 
+  #define MSG_FILAMENT_CHANGE_UNLOAD_2        "filament udskyd."
225 
+  #define MSG_FILAMENT_CHANGE_INSERT_1        "Indsæt filament"
226 
+  #define MSG_FILAMENT_CHANGE_INSERT_2        "og tryk på knap"
227 
+  #define MSG_FILAMENT_CHANGE_INSERT_3        "for at fortsætte..."
220 228 
   #define MSG_FILAMENT_CHANGE_LOAD_1          "Vent på"
221 
-  #define MSG_FILAMENT_CHANGE_LOAD_2          "filament fødning"
229 
+  #define MSG_FILAMENT_CHANGE_LOAD_2          "filament indtag"
222 230 
   #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Vent på"
223 
-  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       "filament extrudere"
224 
-  #define MSG_FILAMENT_CHANGE_RESUME_1        "Vent på at"
225 
-  #define MSG_FILAMENT_CHANGE_RESUME_2        "print forsætter"
231 
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       "filament extrudering"
232 
+  #define MSG_FILAMENT_CHANGE_RESUME_1        "Vent på at print"
233 
+  #define MSG_FILAMENT_CHANGE_RESUME_2        "fortsætter"
226 234 
 #else // LCD_HEIGHT < 4
227 235 
   #define MSG_FILAMENT_CHANGE_INIT_1          "Vent venligst..."
228 
-  #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Tømmer..."
236 
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Udskyder..."
229 237 
   #define MSG_FILAMENT_CHANGE_INSERT_1        "Indsæt og klik"
230 
-  #define MSG_FILAMENT_CHANGE_LOAD_1          "Føder..."
238 
+  #define MSG_FILAMENT_CHANGE_LOAD_1          "Indtager..."
231 239 
   #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Extrudere..."
232 240 
   #define MSG_FILAMENT_CHANGE_RESUME_1        "Fortsætter..."
233 241 
 #endif // LCD_HEIGHT < 4
234 242
235 243 
 #endif // LANGUAGE_DA_H
236 
-

+ 1
- 1
Marlin/language_de.h Näytä tiedosto 

@@ -185,7 +185,7 @@
185 185 
 #define MSG_INFO_BAUDRATE                   "Baud"
186 186 
 #define MSG_INFO_PROTOCOL                   "Protokol"
187 187
188 
-#if LCD_WIDTH > 19
188 
+#if LCD_WIDTH >= 20
189 189 
   #define MSG_INFO_PRINT_COUNT              "Gesamte Drucke"
190 190 
   #define MSG_INFO_COMPLETED_PRINTS         "Beendete Drucke"
191 191 
   #define MSG_INFO_PRINT_TIME               "Gesamte Druckzeit"

+ 1
- 1
Marlin/language_el.h Näytä tiedosto 

@@ -180,7 +180,7 @@
180 180 
 #define MSG_INFO_BAUDRATE                   "Baud"
181 181 
 #define MSG_INFO_PROTOCOL                   "Protocol"
182 182
183 
-#if LCD_WIDTH > 19
183 
+#if LCD_WIDTH >= 20
184 184 
   #define MSG_INFO_PRINT_COUNT              "Print Count"
185 185 
   #define MSG_INFO_COMPLETED_PRINTS         "Completed  "
186 186 
   #define MSG_INFO_PRINT_TIME               "Total Time "

+ 1
- 1
Marlin/language_en.h Näytä tiedosto 

@@ -488,7 +488,7 @@
488 488 
   #define MSG_INFO_PROTOCOL                   "Protocol"
489 489 
 #endif
490 490
491 
-#if LCD_WIDTH > 19
491 
+#if LCD_WIDTH >= 20
492 492 
   #ifndef MSG_INFO_PRINT_COUNT
493 493 
     #define MSG_INFO_PRINT_COUNT              "Print Count"
494 494 
   #endif

+ 1
- 2
Marlin/language_fr.h Näytä tiedosto 

@@ -188,8 +188,7 @@
188 188 
 #define MSG_INFO_BAUDRATE                   "Baud"
189 189 
 #define MSG_INFO_PROTOCOL                   "Protocole"
190 190
191 
-
192 
-#if LCD_WIDTH > 19
191 
+#if LCD_WIDTH >= 20
193 192 
   #define MSG_INFO_PRINT_COUNT              "Nbre impressions"
194 193 
   #define MSG_INFO_COMPLETED_PRINTS         "Terminees"
195 194 
   #define MSG_INFO_PRINT_TIME               "Tps impr. total"

+ 35
- 35
Marlin/language_gl.h Näytä tiedosto 

@@ -182,18 +182,18 @@
182 182 
 #define MSG_INFO_EXTRUDERS                  "Extrusores"
183 183 
 #define MSG_INFO_BAUDRATE                   "Baudios"
184 184 
 #define MSG_INFO_PROTOCOL                   "Protocolo"
185 
-#if LCD_WIDTH > 19
186 
-    #define MSG_INFO_PRINT_COUNT              "Total traballos"
187 
-    #define MSG_INFO_COMPLETED_PRINTS         "Total completos"
188 
-    #define MSG_INFO_PRINT_TIME               "Tempo impresion"
189 
-    #define MSG_INFO_PRINT_LONGEST            "Traballo +longo"
190 
-    #define MSG_INFO_PRINT_FILAMENT           "Total extruido"
185 
+#if LCD_WIDTH >= 20
186 
+  #define MSG_INFO_PRINT_COUNT              "Total traballos"
187 
+  #define MSG_INFO_COMPLETED_PRINTS         "Total completos"
188 
+  #define MSG_INFO_PRINT_TIME               "Tempo impresion"
189 
+  #define MSG_INFO_PRINT_LONGEST            "Traballo +longo"
190 
+  #define MSG_INFO_PRINT_FILAMENT           "Total extruido"
191 191 
 #else
192 
-    #define MSG_INFO_PRINT_COUNT              "Traballos"
193 
-    #define MSG_INFO_COMPLETED_PRINTS         "Completos"
194 
-    #define MSG_INFO_PRINT_TIME               "Tempo"
195 
-    #define MSG_INFO_PRINT_LONGEST            "O +longo"
196 
-    #define MSG_INFO_PRINT_FILAMENT           "Extruido"
192 
+  #define MSG_INFO_PRINT_COUNT              "Traballos"
193 
+  #define MSG_INFO_COMPLETED_PRINTS         "Completos"
194 
+  #define MSG_INFO_PRINT_TIME               "Tempo"
195 
+  #define MSG_INFO_PRINT_LONGEST            "O +longo"
196 
+  #define MSG_INFO_PRINT_FILAMENT           "Extruido"
197 197 
 #endif
198 198 
 #define MSG_INFO_MIN_TEMP                   "Min Temp"
199 199 
 #define MSG_INFO_MAX_TEMP                   "Max Temp"
 
@@ -203,31 +203,31 @@
203 203 
 #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "Extruir mais"
204 204 
 #define MSG_FILAMENT_CHANGE_OPTION_RESUME   "Segue traballo"
205 205 
 #if LCD_HEIGHT >= 4
206 
-    #define MSG_FILAMENT_CHANGE_INIT_1          "Agarde para"
207 
-    #define MSG_FILAMENT_CHANGE_INIT_2          "iniciar troco"
208 
-    #define MSG_FILAMENT_CHANGE_INIT_3          "de filamento"
209 
-    #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Agarde pola"
210 
-    #define MSG_FILAMENT_CHANGE_UNLOAD_2        "descarga do"
211 
-    #define MSG_FILAMENT_CHANGE_UNLOAD_3        "filamento"
212 
-    #define MSG_FILAMENT_CHANGE_INSERT_1        "Introduza o"
213 
-    #define MSG_FILAMENT_CHANGE_INSERT_2        "filamento e"
214 
-    #define MSG_FILAMENT_CHANGE_INSERT_3        "faga click"
215 
-    #define MSG_FILAMENT_CHANGE_LOAD_1          "Agarde pola"
216 
-    #define MSG_FILAMENT_CHANGE_LOAD_2          "carga do"
217 
-    #define MSG_FILAMENT_CHANGE_LOAD_3          "filamento"
218 
-    #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Agarde pola"
219 
-    #define MSG_FILAMENT_CHANGE_EXTRUDE_2       "extrusion do"
220 
-    #define MSG_FILAMENT_CHANGE_EXTRUDE_3       "filamento"
221 
-    #define MSG_FILAMENT_CHANGE_RESUME_1        "Agarde para"
222 
-    #define MSG_FILAMENT_CHANGE_RESUME_2        "seguir co"
223 
-    #define MSG_FILAMENT_CHANGE_RESUME_3        "traballo"
206 
+  #define MSG_FILAMENT_CHANGE_INIT_1          "Agarde para"
207 
+  #define MSG_FILAMENT_CHANGE_INIT_2          "iniciar troco"
208 
+  #define MSG_FILAMENT_CHANGE_INIT_3          "de filamento"
209 
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Agarde pola"
210 
+  #define MSG_FILAMENT_CHANGE_UNLOAD_2        "descarga do"
211 
+  #define MSG_FILAMENT_CHANGE_UNLOAD_3        "filamento"
212 
+  #define MSG_FILAMENT_CHANGE_INSERT_1        "Introduza o"
213 
+  #define MSG_FILAMENT_CHANGE_INSERT_2        "filamento e"
214 
+  #define MSG_FILAMENT_CHANGE_INSERT_3        "faga click"
215 
+  #define MSG_FILAMENT_CHANGE_LOAD_1          "Agarde pola"
216 
+  #define MSG_FILAMENT_CHANGE_LOAD_2          "carga do"
217 
+  #define MSG_FILAMENT_CHANGE_LOAD_3          "filamento"
218 
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Agarde pola"
219 
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       "extrusion do"
220 
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_3       "filamento"
221 
+  #define MSG_FILAMENT_CHANGE_RESUME_1        "Agarde para"
222 
+  #define MSG_FILAMENT_CHANGE_RESUME_2        "seguir co"
223 
+  #define MSG_FILAMENT_CHANGE_RESUME_3        "traballo"
224 224 
 #else // LCD_HEIGHT < 4
225 
-    #define MSG_FILAMENT_CHANGE_INIT_1          "Agarde..."
226 
-    #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Descargando..."
227 
-    #define MSG_FILAMENT_CHANGE_INSERT_1        "Introduza e click"
228 
-    #define MSG_FILAMENT_CHANGE_LOAD_1          "Cargando..."
229 
-    #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Extruindo..."
230 
-    #define MSG_FILAMENT_CHANGE_RESUME_1        "Seguindo..."
225 
+  #define MSG_FILAMENT_CHANGE_INIT_1          "Agarde..."
226 
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Descargando..."
227 
+  #define MSG_FILAMENT_CHANGE_INSERT_1        "Introduza e click"
228 
+  #define MSG_FILAMENT_CHANGE_LOAD_1          "Cargando..."
229 
+  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Extruindo..."
230 
+  #define MSG_FILAMENT_CHANGE_RESUME_1        "Seguindo..."
231 231 
 #endif // LCD_HEIGHT < 4
232 232
233 233 
 #endif // LANGUAGE_GL_H

+ 1
- 1
Marlin/language_it.h Näytä tiedosto 

@@ -190,7 +190,7 @@
190 190 
 #define MSG_INFO_EXTRUDERS                  "Estrusori"
191 191 
 #define MSG_INFO_BAUDRATE                   "Baud"
192 192 
 #define MSG_INFO_PROTOCOL                   "Protocollo"
193 
-#if LCD_WIDTH > 19
193 
+#if LCD_WIDTH >= 20
194 194 
   #define MSG_INFO_PRINT_COUNT              "Contat. stampa"
195 195 
   #define MSG_INFO_COMPLETED_PRINTS         "Completati"
196 196 
   #define MSG_INFO_PRINT_TIME               "Tempo totale"

+ 13
- 13
Marlin/language_kana.h Näytä tiedosto 

@@ -89,7 +89,7 @@
89 89 
 #define MSG_MIN                             LCD_STR_THERMOMETER " \xbb\xb2\xc3\xb2"                            // " ｻｲﾃｲ" (" Min")
90 90 
 #define MSG_MAX                             LCD_STR_THERMOMETER " \xbb\xb2\xba\xb3"                            // " ｻｲｺｳ" (" Max")
91 91 
 #define MSG_FACTOR                          LCD_STR_THERMOMETER " \xcc\xa7\xb8\xc0\xb0"                        // " ﾌｧｸﾀｰ" (" Fact")
92 
-#if LCD_WIDTH > 19
92 
+#if LCD_WIDTH >= 20
93 93 
   #define MSG_AUTOTEMP                      "\xbc\xde\xc4\xde\xb3\xb5\xdd\xc4\xde\xbe\xb2\xb7\xde\xae"         // "ｼﾞﾄﾞｳｵﾝﾄﾞｾｲｷﾞｮ" ("Autotemp")
94 94 
 #else
95 95 
   #define MSG_AUTOTEMP                      "\xbc\xde\xc4\xde\xb3\xb5\xdd\xc4\xde"                             // "ｼﾞﾄﾞｳｵﾝﾄﾞ" ("Autotemp")
 
@@ -101,7 +101,7 @@
101 101 
 #define MSG_PID_D                           "PID-D"
102 102 
 #define MSG_PID_C                           "PID-C"
103 103 
 #define MSG_SELECT                          "\xbe\xdd\xc0\xb8"                                                 // "ｾﾝﾀｸ" ("Select")
104 
-#if LCD_WIDTH > 19
104 
+#if LCD_WIDTH >= 20
105 105 
   #define MSG_ACC                           "\xb6\xbf\xb8\xc4\xde mm/s2"                                       // "ｶｿｸﾄﾞ mm/s2" ("Accel")
106 106 
   #define MSG_VX_JERK                       "X\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s"                           // "Xｼﾞｸ ﾔｸﾄﾞ mm/s" ("Vx-jerk")
107 107 
   #define MSG_VY_JERK                       "Y\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s"                           // "Yｼﾞｸ ﾔｸﾄﾞ mm/s" ("Vy-jerk")
 
@@ -132,7 +132,7 @@
132 132 
 #define MSG_MOTION                          "\xb3\xba\xde\xb7\xbe\xaf\xc3\xb2"                                 // "ｳｺﾞｷｾｯﾃｲ" ("Motion")
133 133 
 #define MSG_VOLUMETRIC                      "\xcc\xa8\xd7\xd2\xdd\xc4"                                         // "ﾌｨﾗﾒﾝﾄ" ("Filament")
134 134 
 #define MSG_VOLUMETRIC_ENABLED              "E in mm3"
135 
-#if LCD_WIDTH > 19
135 
+#if LCD_WIDTH >= 20
136 136 
   #define MSG_FILAMENT_DIAM                 "\xcc\xa8\xd7\xd2\xdd\xc4\xc1\xae\xaf\xb9\xb2"                     // "ﾌｨﾗﾒﾝﾄﾁｮｯｹｲ" ("Fil. Dia.")
137 137 
 #else
138 138 
   #define MSG_FILAMENT_DIAM                 "\xcc\xa8\xd7\xd2\xdd\xc4\xb9\xb2"                                 // "ﾌｨﾗﾒﾝﾄｹｲ" ("Fil. Dia.")
 
@@ -157,7 +157,7 @@
157 157 
 #define MSG_NO_MOVE                         "\xb3\xba\xde\xb7\xcf\xbe\xdd"                                     // "ｳｺﾞｷﾏｾﾝ" ("No move.")
158 158 
 #define MSG_KILLED                          "\xcb\xbc\xde\xae\xb3\xc3\xb2\xbc"                                 // "ﾋｼﾞｮｳﾃｲｼ" ("KILLED. ")
159 159 
 #define MSG_STOPPED                         "\xc3\xb2\xbc\xbc\xcf\xbc\xc0"                                     // "ﾃｲｼｼﾏｼﾀ" ("STOPPED. ")
160 
-#if LCD_WIDTH > 19
160 
+#if LCD_WIDTH >= 20
161 161 
   #define MSG_CONTROL_RETRACT               "\xcb\xb7\xba\xd0\xd8\xae\xb3 mm"                                  // "ﾋｷｺﾐﾘｮｳ mm" ("Retract mm")
162 162 
   #define MSG_CONTROL_RETRACT_SWAP          "\xcb\xb7\xba\xd0\xd8\xae\xb3S mm"                                 // "ﾋｷｺﾐﾘｮｳS mm" ("Swap Re.mm")
163 163 
   #define MSG_CONTROL_RETRACTF              "\xcb\xb7\xba\xd0\xbf\xb8\xc4\xde mm/s"                            // "ﾋｷｺﾐｿｸﾄﾞ mm/s" ("Retract  V")
 
@@ -179,14 +179,14 @@
179 179 
 #define MSG_INIT_SDCARD                     "SD\xb6\xb0\xc4\xde\xbb\xb2\xd6\xd0\xba\xd0"                       // "SDｶｰﾄﾞｻｲﾖﾐｺﾐ" ("Init. SD card")
180 180 
 #define MSG_CNG_SDCARD                      "SD\xb6\xb0\xc4\xde\xba\xb3\xb6\xdd"                               // "SDｶｰﾄﾞｺｳｶﾝ" ("Change SD card")
181 181 
 #define MSG_ZPROBE_OUT                      "Z\xcc\xdf\xdb\xb0\xcc\xde\x20\xcd\xde\xaf\xc4\xde\xb6\xde\xb2"    // "Zﾌﾟﾛｰﾌﾞ ﾍﾞｯﾄﾞｶﾞｲ" ("Z probe out. bed")
182 
-#if LCD_WIDTH > 19
182 
+#if LCD_WIDTH >= 20
183 183 
   #define MSG_BLTOUCH_SELFTEST              "BLTouch \xbc\xde\xba\xbc\xdd\xc0\xde\xdd"                         // "BLTouch ｼﾞｺｼﾝﾀﾞﾝ" ("BLTouch Self-Test")
184 184 
 #else
185 185 
   #define MSG_BLTOUCH_SELFTEST              "BLTouch \xbe\xd9\xcc\xc3\xbd\xc4"                                 // "BLTouch ｾﾙﾌﾃｽﾄ" ("BLTouch Self-Test")
186 186 
 #endif
187 187 
 #define MSG_BLTOUCH_RESET                   "BLTouch \xd8\xbe\xaf\xc4"                                         // "BLTouch ﾘｾｯﾄ" ("Reset BLTouch")
188 188 
 #define MSG_HOME                            "\xbb\xb7\xc6"                                                     // "ｻｷﾆ" ("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
189 
-#if LCD_WIDTH > 19
189 
+#if LCD_WIDTH >= 20
190 190 
   #define MSG_FIRST                         "\xa6\xcc\xaf\xb7\xbb\xbe\xc3\xb8\xc0\xde\xbb\xb2"                 // "ｦﾌｯｷｻｾﾃｸﾀﾞｻｲ" ("first")
191 191 
 #else
192 192 
   #define MSG_FIRST                         "\xa6\xcc\xaf\xb7\xbb\xbe\xd6"                                     // "ｦﾌｯｷｻｾﾖ" ("first")
 
@@ -195,13 +195,13 @@
195 195 
 #define MSG_BABYSTEP_X                      "X\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3"                            // "Xｼﾞｸ ﾋﾞﾄﾞｳ" ("Babystep X")
196 196 
 #define MSG_BABYSTEP_Y                      "Y\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3"                            // "Yｼﾞｸ ﾋﾞﾄﾞｳ" ("Babystep Y")
197 197 
 #define MSG_BABYSTEP_Z                      "Z\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3"                            // "Zｼﾞｸ ﾋﾞﾄﾞｳ" ("Babystep Z")
198 
-#if LCD_WIDTH > 19
198 
+#if LCD_WIDTH >= 20
199 199 
   #define MSG_ENDSTOP_ABORT                 "\xb2\xc4\xde\xb3\xb9\xde\xdd\xb6\xb2\xb9\xdd\xc1\xb7\xc9\xb3"     // "ｲﾄﾞｳｹﾞﾝｶｲｹﾝﾁｷﾉｳ" ("Endstop abort")
200 200 
 #else
201 201 
   #define MSG_ENDSTOP_ABORT                 "\xb2\xc4\xde\xb3\xb9\xde\xdd\xb6\xb2\xb9\xdd\xc1"                 // "ｲﾄﾞｳｹﾞﾝｶｲｹﾝﾁ" ("Endstop abort")
202 202 
 #endif
203 203 
 #define MSG_HEATING_FAILED_LCD              "\xb6\xc8\xc2\xbc\xaf\xca\xdf\xb2"                                 // "ｶﾈﾂｼｯﾊﾟｲ" ("Heating failed")
204 
-#if LCD_WIDTH > 19
204 
+#if LCD_WIDTH >= 20
205 205 
   #define MSG_ERR_REDUNDANT_TEMP            "\xb4\xd7\xb0:\xbc\xde\xae\xb3\xc1\xae\xb3\xbb\xb0\xd0\xbd\xc0\xb0\xb7\xc9\xb3" // "ｴﾗｰ:ｼﾞｮｳﾁｮｳｻｰﾐｽﾀｰｷﾉｳ" ("Err: REDUNDANT TEMP")
206 206 
 #else
207 207 
   #define MSG_ERR_REDUNDANT_TEMP            "\xb4\xd7\xb0:\xbc\xde\xae\xb3\xc1\xae\xb3\xbb\xb0\xd0\xbd\xc0"                 // "ｴﾗｰ:ｼﾞｮｳﾁｮｳｻｰﾐｽﾀ" ("Err: REDUNDANT TEMP")
 
@@ -209,7 +209,7 @@
209 209 
 #define MSG_THERMAL_RUNAWAY                 "\xc8\xc2\xce\xde\xb3\xbf\xb3"                                                  // "ﾈﾂﾎﾞｳｿｳ" ("THERMAL RUNAWAY")
210 210 
 #define MSG_ERR_MAXTEMP                     "\xb4\xd7\xb0:\xbb\xb2\xba\xb3\xb5\xdd\xc1\xae\xb3\xb6"                         // "ｴﾗｰ:ｻｲｺｳｵﾝﾁｮｳｶ" ("Err: MAXTEMP")
211 211 
 #define MSG_ERR_MINTEMP                     "\xb4\xd7\xb0:\xbb\xb2\xc3\xb2\xb5\xdd\xd0\xcf\xdd"                             // "ｴﾗｰ:ｻｲﾃｲｵﾝﾐﾏﾝ" ("Err: MINTEMP")
212 
-#if LCD_WIDTH > 19
212 
+#if LCD_WIDTH >= 20
213 213 
   #define MSG_ERR_MAXTEMP_BED               "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xba\xb3\xb5\xdd\xc1\xae\xb3\xb6" // "ｴﾗｰ:ﾍﾞｯﾄﾞ ｻｲｺｳｵﾝﾁｮｳｶ" ("Err: MAXTEMP BED")
214 214 
   #define MSG_ERR_MINTEMP_BED               "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xc3\xb2\xb5\xdd\xd0\xcf\xdd"     // "ｴﾗｰ:ﾍﾞｯﾄﾞ ｻｲﾃｲｵﾝﾐﾏﾝ" ("Err: MINTEMP BED")
215 215 
 #else
 
@@ -243,20 +243,20 @@
243 243 
 #define MSG_INFO_COMPLETED_PRINTS           "\xb6\xdd\xd8\xae\xb3\xbd\xb3"                                     // "ｶﾝﾘｮｳｽｳ" ("Completed")
244 244 
 #define MSG_INFO_PRINT_TIME                 "\xcc\xdf\xd8\xdd\xc4\xbc\xde\xb6\xdd\xd9\xb2\xb9\xb2"             // "ﾌﾟﾘﾝﾄｼﾞｶﾝﾙｲｹｲ" ("Total print time")
245 245 
 #define MSG_INFO_PRINT_LONGEST              "\xbb\xb2\xc1\xae\xb3\xcc\xdf\xd8\xdd\xc4\xbc\xde\xb6\xdd"         // "ｻｲﾁｮｳﾌﾟﾘﾝﾄｼﾞｶﾝ" ("Longest job time")
246 
-#if LCD_WIDTH > 19
246 
+#if LCD_WIDTH >= 20
247 247 
   #define MSG_INFO_PRINT_FILAMENT           "\xcc\xa8\xd7\xd2\xdd\xc4\xbc\xd6\xb3\xd8\xae\xb3\xd9\xb2\xb9\xb2" // "ﾌｨﾗﾒﾝﾄｼﾖｳﾘｮｳﾙｲｹｲ" ("Extruded total")
248 248 
 #else
249 249 
   #define MSG_INFO_PRINT_FILAMENT           "\xcc\xa8\xd7\xd2\xdd\xc4\xbf\xb3\xbc\xd6\xb3\xd8\xae\xb3"         // "ﾌｨﾗﾒﾝﾄｿｳｼﾖｳﾘｮｳ" ("Extruded")
250 250 
 #endif
251 251 
 #define MSG_INFO_MIN_TEMP                   "\xbe\xaf\xc3\xb2\xbb\xb2\xc3\xb2\xb5\xdd"                         // "ｾｯﾃｲｻｲﾃｲｵﾝ" ("Min Temp")
252 252 
 #define MSG_INFO_MAX_TEMP                   "\xbe\xaf\xc3\xb2\xbb\xb2\xba\xb3\xb5\xdd"                         // "ｾｯﾃｲｻｲｺｳｵﾝ" ("Max Temp")
253 
-#if LCD_WIDTH > 19
253 
+#if LCD_WIDTH >= 20
254 254 
   #define MSG_INFO_PSU                      "\xc3\xde\xdd\xb9\xde\xdd\xbc\xad\xcd\xde\xc2"                     // "ﾃﾞﾝｹﾞﾝｼｭﾍﾞﾂ" ("Power Supply")
255 255 
 #else
256 256 
   #define MSG_INFO_PSU                      "\xc3\xde\xdd\xb9\xde\xdd"                                         // "ﾃﾞﾝｹﾞﾝ" ("Power Supply")
257 257 
 #endif
258 258 
 #define MSG_DRIVE_STRENGTH                  "\xd3\xb0\xc0\xb0\xb8\xc4\xde\xb3\xd8\xae\xb8"                     // "ﾓｰﾀｰｸﾄﾞｳﾘｮｸ" ("Drive Strength")
259 
-#if LCD_WIDTH > 19
259 
+#if LCD_WIDTH >= 20
260 260 
   #define MSG_DAC_PERCENT                   "DAC\xbc\xad\xc2\xd8\xae\xb8 %"                                    // "DACｼｭﾂﾘｮｸ %" ("Driver %")
261 261 
 #else
262 262 
   #define MSG_DAC_PERCENT                   "DAC\xbc\xad\xc2\xd8\xae\xb8"                                      // "DACｼｭﾂﾘｮｸ" ("Driver %")
 
@@ -288,7 +288,7 @@
288 288 
 #else // LCD_HEIGHT < 4
289 289 
   #define MSG_FILAMENT_CHANGE_INIT_1        "\xba\xb3\xb6\xdd\xa6\xb6\xb2\xbc\xbc\xcf\xbd"                     // "ｺｳｶﾝｦｶｲｼｼﾏｽ" ("Please wait...")
290 290 
   #define MSG_FILAMENT_CHANGE_UNLOAD_1      "\xcc\xa8\xd7\xd2\xdd\xc4\xc7\xb7\xc0\xde\xbc\xc1\xad\xb3"         // "ﾌｨﾗﾒﾝﾄﾇｷﾀﾞｼﾁｭｳ" ("Ejecting...")
291 
-  #if LCD_WIDTH > 19
291 
+  #if LCD_WIDTH >= 20
292 292 
     #define MSG_FILAMENT_CHANGE_INSERT_1    "\xbf\xb3\xc6\xad\xb3\xbc\x2c\xb8\xd8\xaf\xb8\xbc\xc3\xb8\xc0\xde\xbb\xb2" // "ｿｳﾆｭｳｼ,ｸﾘｯｸｼﾃｸﾀﾞｻｲ" ("Insert and Click")
293 293 
   #else
294 294 
     #define MSG_FILAMENT_CHANGE_INSERT_1    "\xbf\xb3\xc6\xad\xb3\xbc\x2c\xb8\xd8\xaf\xb8\xbe\xd6"                     // "ｿｳﾆｭｳｼ,ｸﾘｯｸｾﾖ" ("Insert and Click")

+ 1
- 1
Marlin/language_tr.h Näytä tiedosto 

@@ -186,7 +186,7 @@
186 186 
 #define MSG_INFO_BAUDRATE                   "\xddleti\xfeim H\xfdz\xfd"
187 187 
 #define MSG_INFO_PROTOCOL                   "Protokol"
188 188
189 
-#if LCD_WIDTH > 19
189 
+#if LCD_WIDTH >= 20
190 190 
   #define MSG_INFO_PRINT_COUNT              "Bask\xfd Say\xfds\xfd"
191 191 
   #define MSG_INFO_COMPLETED_PRINTS         "Tamamlanan"
192 192 
   #define MSG_INFO_PRINT_TIME               "Toplam Bask\xfd S\xfcresi"

+ 2
- 2
Marlin/ultralcd_impl_HD44780.h Näytä tiedosto 

@@ -721,7 +721,7 @@ static void lcd_implementation_status_screen() {
721 721 
     lcd.print(itostr3(feedrate_percentage));
722 722 
     lcd.print('%');
723 723
724 
-    #if LCD_WIDTH > 19 && ENABLED(SDSUPPORT)
724 
+    #if LCD_WIDTH >= 20 && ENABLED(SDSUPPORT)
725 725
726 726 
       lcd.setCursor(7, 2);
727 727 
       lcd_printPGM(PSTR("SD"));
 
@@ -731,7 +731,7 @@ static void lcd_implementation_status_screen() {
731 731 
         lcd_printPGM(PSTR("---"));
732 732 
       lcd.print('%');
733 733
734 
-    #endif // LCD_WIDTH > 19 && SDSUPPORT
734 
+    #endif // LCD_WIDTH >= 20 && SDSUPPORT
735 735
736 736 
     lcd.setCursor(LCD_WIDTH - 6, 2);
737 737 
     lcd.print(LCD_STR_CLOCK[0]);

Write Preview
Loading…
Peruuta
Tallenna