🧑‍💻 Preheat menu improvements (#24017)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

Marlin/Configuration.h

@@ -2005,7 +2005,7 @@
 // @section temperature
 
 //
-// Preheat Constants - Up to 5 are supported without changes
+// Preheat Constants - Up to 6 are supported without changes
 //
 #define PREHEAT_1_LABEL       "PLA"
 #define PREHEAT_1_TEMP_HOTEND 180

Marlin/src/lcd/e3v2/jyersui/dwin.cpp

@@ -1012,10 +1012,62 @@ void CrealityDWINClass::Update_Status_Bar(bool refresh/*=false*/) {
 /* Menu Item Config */
 
 void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/*=true*/) {
-  uint8_t row = item - scrollpos;
+  const uint8_t row = item - scrollpos;
   #if HAS_LEVELING
     static bool level_state;
   #endif
+
+  #if HAS_PREHEAT
+
+    #define PREHEAT_BACK 0
+    #define PREHEAT_SUBMENU_HOTEND (PREHEAT_BACK + ENABLED(HAS_HOTEND))
+    #define PREHEAT_SUBMENU_BED (PREHEAT_SUBMENU_HOTEND + ENABLED(HAS_HEATED_BED))
+    #define PREHEAT_SUBMENU_FAN (PREHEAT_SUBMENU_BED + ENABLED(HAS_FAN))
+    #define PREHEAT_SUBMENU_TOTAL PREHEAT_SUBMENU_FAN
+
+    auto preheat_submenu = [&](const int index, const uint8_t item, const uint8_t sel) {
+      switch (item) {
+        case PREHEAT_BACK:
+          if (draw)
+            Draw_Menu_Item(row, ICON_Back, F("Back"));
+          else
+            Draw_Menu(TempMenu, sel);
+          break;
+        #if HAS_HOTEND
+          case PREHEAT_SUBMENU_HOTEND:
+            if (draw) {
+              Draw_Menu_Item(row, ICON_SetEndTemp, F("Hotend"));
+              Draw_Float(ui.material_preset[index].hotend_temp, row, false, 1);
+            }
+            else
+              Modify_Value(ui.material_preset[index].hotend_temp, MIN_E_TEMP, MAX_E_TEMP, 1);
+            break;
+        #endif
+        #if HAS_HEATED_BED
+          case PREHEAT_SUBMENU_BED:
+            if (draw) {
+              Draw_Menu_Item(row, ICON_SetBedTemp, F("Bed"));
+              Draw_Float(ui.material_preset[index].bed_temp, row, false, 1);
+            }
+            else
+              Modify_Value(ui.material_preset[index].bed_temp, MIN_BED_TEMP, MAX_BED_TEMP, 1);
+            break;
+        #endif
+        #if HAS_FAN
+          case PREHEAT_SUBMENU_FAN:
+            if (draw) {
+              Draw_Menu_Item(row, ICON_FanSpeed, F("Fan"));
+              Draw_Float(ui.material_preset[index].fan_speed, row, false, 1);
+            }
+            else
+              Modify_Value(ui.material_preset[index].fan_speed, MIN_FAN_SPEED, MAX_FAN_SPEED, 1);
+            break;
+        #endif
+      }
+    };
+
+  #endif
+
   switch (menu) {
     case Prepare:
 
@@ -1584,7 +1636,6 @@ void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/
 
     #if HAS_PREHEAT
       case Preheat: {
-        #define PREHEAT_BACK 0
         #define PREHEAT_MODE (PREHEAT_BACK + 1)
         #define PREHEAT_1 (PREHEAT_MODE + 1)
         #define PREHEAT_2 (PREHEAT_1 + (PREHEAT_COUNT >= 2))
@@ -1606,6 +1657,7 @@ void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/
             else
               Draw_Menu(Prepare, PREPARE_PREHEAT);
             break;
+
           case PREHEAT_MODE:
             if (draw) {
               Draw_Menu_Item(row, ICON_Homing, F("Preheat Mode"));
@@ -1615,50 +1667,13 @@ void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/
               Modify_Option(preheatmode, preheat_modes, 2);
             break;
 
-          #if PREHEAT_COUNT >= 1
-            case PREHEAT_1:
-              if (draw)
-                Draw_Menu_Item(row, ICON_Temperature, F(PREHEAT_1_LABEL));
-              else
-                do_preheat(0);
-              break;
-          #endif
-
-          #if PREHEAT_COUNT >= 2
-            case PREHEAT_2:
-              if (draw)
-                Draw_Menu_Item(row, ICON_Temperature, F(PREHEAT_2_LABEL));
-              else
-                do_preheat(1);
-              break;
-          #endif
-
-          #if PREHEAT_COUNT >= 3
-            case PREHEAT_3:
-              if (draw)
-                Draw_Menu_Item(row, ICON_Temperature, F(PREHEAT_3_LABEL));
-              else
-                do_preheat(2);
-              break;
-          #endif
-
-          #if PREHEAT_COUNT >= 4
-            case PREHEAT_4:
-              if (draw)
-                Draw_Menu_Item(row, ICON_Temperature, F(PREHEAT_4_LABEL));
-              else
-                do_preheat(3);
-              break;
-          #endif
+          #define _PREHEAT_CASE(N) \
+            case PREHEAT_##N: { \
+              if (draw) Draw_Menu_Item(row, ICON_Temperature, F(PREHEAT_## N ##_LABEL)); \
+              else do_preheat(N - 1); \
+            } break;
 
-          #if PREHEAT_COUNT >= 5
-            case PREHEAT_5:
-              if (draw)
-                Draw_Menu_Item(row, ICON_Temperature, F(PREHEAT_5_LABEL));
-              else
-                do_preheat(4);
-              break;
-          #endif
+          REPEAT_1(PREHEAT_COUNT, _PREHEAT_CASE)
         }
       } break;
     #endif // HAS_PREHEAT
@@ -1871,46 +1886,14 @@ void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/
               Draw_Menu(PID);
             break;
         #endif
-        #if PREHEAT_COUNT >= 1
-          case TEMP_PREHEAT1:
-            if (draw)
-              Draw_Menu_Item(row, ICON_Step, F(PREHEAT_1_LABEL), nullptr, true);
-            else
-              Draw_Menu(Preheat1);
-            break;
-        #endif
-        #if PREHEAT_COUNT >= 2
-          case TEMP_PREHEAT2:
-            if (draw)
-              Draw_Menu_Item(row, ICON_Step, F(PREHEAT_2_LABEL), nullptr, true);
-            else
-              Draw_Menu(Preheat2);
-            break;
-        #endif
-        #if PREHEAT_COUNT >= 3
-          case TEMP_PREHEAT3:
-            if (draw)
-              Draw_Menu_Item(row, ICON_Step, F(PREHEAT_3_LABEL), nullptr, true);
-            else
-              Draw_Menu(Preheat3);
-            break;
-        #endif
-        #if PREHEAT_COUNT >= 4
-          case TEMP_PREHEAT4:
-            if (draw)
-              Draw_Menu_Item(row, ICON_Step, F(PREHEAT_4_LABEL), nullptr, true);
-            else
-              Draw_Menu(Preheat4);
-            break;
-        #endif
-        #if PREHEAT_COUNT >= 5
-          case TEMP_PREHEAT5:
-            if (draw)
-              Draw_Menu_Item(row, ICON_Step, F(PREHEAT_5_LABEL), nullptr, true);
-            else
-              Draw_Menu(Preheat5);
-            break;
-        #endif
+
+        #define _TEMP_PREHEAT_CASE(N) \
+          case TEMP_PREHEAT##N: { \
+            if (draw) Draw_Menu_Item(row, ICON_Step, F(PREHEAT_## N ##_LABEL), nullptr, true); \
+            else Draw_Menu(Preheat##N); \
+          } break;
+
+        REPEAT_1(PREHEAT_COUNT, _TEMP_PREHEAT_CASE)
       }
       break;
 
@@ -2095,255 +2078,10 @@ void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/
         break;
     #endif // HAS_HEATED_BED
 
-    #if PREHEAT_COUNT >= 1
-      case Preheat1:
-
-        #define PREHEAT1_BACK 0
-        #define PREHEAT1_HOTEND (PREHEAT1_BACK + ENABLED(HAS_HOTEND))
-        #define PREHEAT1_BED (PREHEAT1_HOTEND + ENABLED(HAS_HEATED_BED))
-        #define PREHEAT1_FAN (PREHEAT1_BED + ENABLED(HAS_FAN))
-        #define PREHEAT1_TOTAL PREHEAT1_FAN
-
-        switch (item) {
-          case PREHEAT1_BACK:
-            if (draw)
-              Draw_Menu_Item(row, ICON_Back, F("Back"));
-            else
-              Draw_Menu(TempMenu, TEMP_PREHEAT1);
-            break;
-          #if HAS_HOTEND
-            case PREHEAT1_HOTEND:
-              if (draw) {
-                Draw_Menu_Item(row, ICON_SetEndTemp, F("Hotend"));
-                Draw_Float(ui.material_preset[0].hotend_temp, row, false, 1);
-              }
-              else
-                Modify_Value(ui.material_preset[0].hotend_temp, MIN_E_TEMP, MAX_E_TEMP, 1);
-              break;
-          #endif
-          #if HAS_HEATED_BED
-            case PREHEAT1_BED:
-              if (draw) {
-                Draw_Menu_Item(row, ICON_SetBedTemp, F("Bed"));
-                Draw_Float(ui.material_preset[0].bed_temp, row, false, 1);
-              }
-              else
-                Modify_Value(ui.material_preset[0].bed_temp, MIN_BED_TEMP, MAX_BED_TEMP, 1);
-              break;
-          #endif
-          #if HAS_FAN
-            case PREHEAT1_FAN:
-              if (draw) {
-                Draw_Menu_Item(row, ICON_FanSpeed, F("Fan"));
-                Draw_Float(ui.material_preset[0].fan_speed, row, false, 1);
-              }
-              else
-                Modify_Value(ui.material_preset[0].fan_speed, MIN_FAN_SPEED, MAX_FAN_SPEED, 1);
-              break;
-          #endif
-        }
-        break;
-    #endif // PREHEAT_COUNT >= 1
-
-    #if PREHEAT_COUNT >= 2
-      case Preheat2:
-
-        #define PREHEAT2_BACK 0
-        #define PREHEAT2_HOTEND (PREHEAT2_BACK + ENABLED(HAS_HOTEND))
-        #define PREHEAT2_BED (PREHEAT2_HOTEND + ENABLED(HAS_HEATED_BED))
-        #define PREHEAT2_FAN (PREHEAT2_BED + ENABLED(HAS_FAN))
-        #define PREHEAT2_TOTAL PREHEAT2_FAN
-
-        switch (item) {
-          case PREHEAT2_BACK:
-            if (draw)
-              Draw_Menu_Item(row, ICON_Back, F("Back"));
-            else
-              Draw_Menu(TempMenu, TEMP_PREHEAT2);
-            break;
-          #if HAS_HOTEND
-            case PREHEAT2_HOTEND:
-              if (draw) {
-                Draw_Menu_Item(row, ICON_SetEndTemp, F("Hotend"));
-                Draw_Float(ui.material_preset[1].hotend_temp, row, false, 1);
-              }
-              else
-                Modify_Value(ui.material_preset[1].hotend_temp, MIN_E_TEMP, MAX_E_TEMP, 1);
-              break;
-          #endif
-          #if HAS_HEATED_BED
-            case PREHEAT2_BED:
-              if (draw) {
-                Draw_Menu_Item(row, ICON_SetBedTemp, F("Bed"));
-                Draw_Float(ui.material_preset[1].bed_temp, row, false, 1);
-              }
-              else
-                Modify_Value(ui.material_preset[1].bed_temp, MIN_BED_TEMP, MAX_BED_TEMP, 1);
-              break;
-          #endif
-          #if HAS_FAN
-            case PREHEAT2_FAN:
-              if (draw) {
-                Draw_Menu_Item(row, ICON_FanSpeed, F("Fan"));
-                Draw_Float(ui.material_preset[1].fan_speed, row, false, 1);
-              }
-              else
-                Modify_Value(ui.material_preset[1].fan_speed, MIN_FAN_SPEED, MAX_FAN_SPEED, 1);
-              break;
-          #endif
-        }
-        break;
-    #endif // PREHEAT_COUNT >= 2
-
-    #if PREHEAT_COUNT >= 3
-      case Preheat3:
-
-        #define PREHEAT3_BACK 0
-        #define PREHEAT3_HOTEND (PREHEAT3_BACK + ENABLED(HAS_HOTEND))
-        #define PREHEAT3_BED (PREHEAT3_HOTEND + ENABLED(HAS_HEATED_BED))
-        #define PREHEAT3_FAN (PREHEAT3_BED + ENABLED(HAS_FAN))
-        #define PREHEAT3_TOTAL PREHEAT3_FAN
-
-        switch (item) {
-          case PREHEAT3_BACK:
-            if (draw)
-              Draw_Menu_Item(row, ICON_Back, F("Back"));
-            else
-              Draw_Menu(TempMenu, TEMP_PREHEAT3);
-            break;
-          #if HAS_HOTEND
-            case PREHEAT3_HOTEND:
-              if (draw) {
-                Draw_Menu_Item(row, ICON_SetEndTemp, F("Hotend"));
-                Draw_Float(ui.material_preset[2].hotend_temp, row, false, 1);
-              }
-              else
-                Modify_Value(ui.material_preset[2].hotend_temp, MIN_E_TEMP, MAX_E_TEMP, 1);
-              break;
-          #endif
-          #if HAS_HEATED_BED
-            case PREHEAT3_BED:
-              if (draw) {
-                Draw_Menu_Item(row, ICON_SetBedTemp, F("Bed"));
-                Draw_Float(ui.material_preset[2].bed_temp, row, false, 1);
-              }
-              else
-                Modify_Value(ui.material_preset[2].bed_temp, MIN_BED_TEMP, MAX_BED_TEMP, 1);
-              break;
-          #endif
-          #if HAS_FAN
-            case PREHEAT3_FAN:
-              if (draw) {
-                Draw_Menu_Item(row, ICON_FanSpeed, F("Fan"));
-                Draw_Float(ui.material_preset[2].fan_speed, row, false, 1);
-              }
-              else
-                Modify_Value(ui.material_preset[2].fan_speed, MIN_FAN_SPEED, MAX_FAN_SPEED, 1);
-              break;
-          #endif
-        }
-        break;
-    #endif // PREHEAT_COUNT >= 3
-
-    #if PREHEAT_COUNT >= 4
-      case Preheat4:
-
-        #define PREHEAT4_BACK 0
-        #define PREHEAT4_HOTEND (PREHEAT4_BACK + ENABLED(HAS_HOTEND))
-        #define PREHEAT4_BED (PREHEAT4_HOTEND + ENABLED(HAS_HEATED_BED))
-        #define PREHEAT4_FAN (PREHEAT4_BED + ENABLED(HAS_FAN))
-        #define PREHEAT4_TOTAL PREHEAT4_FAN
-
-        switch (item) {
-          case PREHEAT4_BACK:
-            if (draw)
-              Draw_Menu_Item(row, ICON_Back, F("Back"));
-            else
-              Draw_Menu(TempMenu, TEMP_PREHEAT4);
-            break;
-          #if HAS_HOTEND
-            case PREHEAT4_HOTEND:
-              if (draw) {
-                Draw_Menu_Item(row, ICON_SetEndTemp, F("Hotend"));
-                Draw_Float(ui.material_preset[3].hotend_temp, row, false, 1);
-              }
-              else
-                Modify_Value(ui.material_preset[3].hotend_temp, MIN_E_TEMP, MAX_E_TEMP, 1);
-              break;
-          #endif
-          #if HAS_HEATED_BED
-            case PREHEAT4_BED:
-              if (draw) {
-                Draw_Menu_Item(row, ICON_SetBedTemp, F("Bed"));
-                Draw_Float(ui.material_preset[3].bed_temp, row, false, 1);
-              }
-              else
-                Modify_Value(ui.material_preset[3].bed_temp, MIN_BED_TEMP, MAX_BED_TEMP, 1);
-              break;
-          #endif
-          #if HAS_FAN
-            case PREHEAT4_FAN:
-              if (draw) {
-                Draw_Menu_Item(row, ICON_FanSpeed, F("Fan"));
-                Draw_Float(ui.material_preset[3].fan_speed, row, false, 1);
-              }
-              else
-                Modify_Value(ui.material_preset[3].fan_speed, MIN_FAN_SPEED, MAX_FAN_SPEED, 1);
-              break;
-          #endif
-        }
-        break;
-    #endif // PREHEAT_COUNT >= 4
-
-    #if PREHEAT_COUNT >= 5
-      case Preheat5:
-
-        #define PREHEAT5_BACK 0
-        #define PREHEAT5_HOTEND (PREHEAT5_BACK + ENABLED(HAS_HOTEND))
-        #define PREHEAT5_BED (PREHEAT5_HOTEND + ENABLED(HAS_HEATED_BED))
-        #define PREHEAT5_FAN (PREHEAT5_BED + ENABLED(HAS_FAN))
-        #define PREHEAT5_TOTAL PREHEAT5_FAN
-
-        switch (item) {
-          case PREHEAT5_BACK:
-            if (draw)
-              Draw_Menu_Item(row, ICON_Back, F("Back"));
-            else
-              Draw_Menu(TempMenu, TEMP_PREHEAT5);
-            break;
-          #if HAS_HOTEND
-            case PREHEAT5_HOTEND:
-              if (draw) {
-                Draw_Menu_Item(row, ICON_SetEndTemp, F("Hotend"));
-                Draw_Float(ui.material_preset[4].hotend_temp, row, false, 1);
-              }
-              else
-                Modify_Value(ui.material_preset[4].hotend_temp, MIN_E_TEMP, MAX_E_TEMP, 1);
-              break;
-          #endif
-          #if HAS_HEATED_BED
-            case PREHEAT5_BED:
-              if (draw) {
-                Draw_Menu_Item(row, ICON_SetBedTemp, F("Bed"));
-                Draw_Float(ui.material_preset[4].bed_temp, row, false, 1);
-              }
-              else
-                Modify_Value(ui.material_preset[4].bed_temp, MIN_BED_TEMP, MAX_BED_TEMP, 1);
-              break;
-          #endif
-          #if HAS_FAN
-            case PREHEAT5_FAN:
-              if (draw) {
-                Draw_Menu_Item(row, ICON_FanSpeed, F("Fan"));
-                Draw_Float(ui.material_preset[4].fan_speed, row, false, 1);
-              }
-              else
-                Modify_Value(ui.material_preset[4].fan_speed, MIN_FAN_SPEED, MAX_FAN_SPEED, 1);
-              break;
-          #endif
-        }
-        break;
-    #endif // PREHEAT_COUNT >= 5
+    #if HAS_PREHEAT
+      #define _PREHEAT_SUBMENU_CASE(N) case Preheat##N: preheat_submenu(N, item, TEMP_PREHEAT##N); break;
+      REPEAT_1(PREHEAT_COUNT, _PREHEAT_SUBMENU_CASE)
+    #endif
 
     case Motion:
 
@@ -3855,7 +3593,9 @@ void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/
       }
       break;
 
-    case PreheatHotend:
+    #if HAS_PREHEAT && HAS_HOTEND
+
+      case PreheatHotend:
 
         #define PREHEATHOTEND_BACK 0
         #define PREHEATHOTEND_CONTINUE (PREHEATHOTEND_BACK + 1)
@@ -3918,46 +3658,16 @@ void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/
               }
             }
             break;
-          #if PREHEAT_COUNT >= 1
-            case PREHEATHOTEND_1:
-              if (draw)
-                Draw_Menu_Item(row, ICON_Temperature, F(PREHEAT_1_LABEL));
-              else
-                ui.preheat_hotend_and_fan(0);
-              break;
-          #endif
-          #if PREHEAT_COUNT >= 2
-            case PREHEATHOTEND_2:
-              if (draw)
-                Draw_Menu_Item(row, ICON_Temperature, F(PREHEAT_2_LABEL));
-              else
-                ui.preheat_hotend_and_fan(1);
-              break;
-          #endif
-          #if PREHEAT_COUNT >= 3
-            case PREHEATHOTEND_3:
-              if (draw)
-                Draw_Menu_Item(row, ICON_Temperature, F(PREHEAT_3_LABEL));
-              else
-                ui.preheat_hotend_and_fan(2);
-              break;
-          #endif
-          #if PREHEAT_COUNT >= 4
-            case PREHEATHOTEND_4:
-              if (draw)
-                Draw_Menu_Item(row, ICON_Temperature, F(PREHEAT_4_LABEL));
-              else
-                ui.preheat_hotend_and_fan(3);
-              break;
-          #endif
-          #if PREHEAT_COUNT >= 5
-            case PREHEATHOTEND_5:
-              if (draw)
-                Draw_Menu_Item(row, ICON_Temperature, F(PREHEAT_5_LABEL));
-              else
-                ui.preheat_hotend_and_fan(4);
+
+
+          #define _PREHEAT_HOTEND_CASE(N) \
+            case PREHEATHOTEND_##N: \
+              if (draw) Draw_Menu_Item(row, ICON_Temperature, F(PREHEAT_## N ##_LABEL)); \
+              else ui.preheat_hotend_and_fan((N) - 1); \
               break;
-          #endif
+
+          REPEAT_1(PREHEAT_COUNT, _PREHEAT_HOTEND_CASE)
+
           case PREHEATHOTEND_CUSTOM:
             if (draw) {
               Draw_Menu_Item(row, ICON_Temperature, F("Custom"));
@@ -3968,6 +3678,8 @@ void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/
             break;
         }
         break;
+
+    #endif // HAS_PREHEAT && HAS_HOTEND
   }
 }
 
@@ -3998,20 +3710,9 @@ FSTR_P CrealityDWINClass::Get_Menu_Title(uint8_t menu) {
     #if HAS_HEATED_BED
       case BedPID:          return F("Bed PID Settings");
     #endif
-    #if PREHEAT_COUNT >= 1
-      case Preheat1:        return F(PREHEAT_1_LABEL " Settings");
-    #endif
-    #if PREHEAT_COUNT >= 2
-      case Preheat2:        return F(PREHEAT_2_LABEL " Settings");
-    #endif
-    #if PREHEAT_COUNT >= 3
-      case Preheat3:        return F(PREHEAT_3_LABEL " Settings");
-    #endif
-    #if PREHEAT_COUNT >= 4
-      case Preheat4:        return F(PREHEAT_4_LABEL " Settings");
-    #endif
-    #if PREHEAT_COUNT >= 5
-      case Preheat5:        return F(PREHEAT_5_LABEL " Settings");
+    #if HAS_PREHEAT
+      #define _PREHEAT_TITLE_CASE(N) case Preheat##N: return F(PREHEAT_## N ##_LABEL " Settings");
+      REPEAT_1(PREHEAT_COUNT, _PREHEAT_TITLE_CASE)
     #endif
     case Motion:            return F("Motion Settings");
     case HomeOffsets:       return F("Home Offsets");
@@ -4074,20 +3775,9 @@ uint8_t CrealityDWINClass::Get_Menu_Size(uint8_t menu) {
     #if HAS_HEATED_BED
       case BedPID:          return BEDPID_TOTAL;
     #endif
-    #if PREHEAT_COUNT >= 1
-      case Preheat1:        return PREHEAT1_TOTAL;
-    #endif
-    #if PREHEAT_COUNT >= 2
-      case Preheat2:        return PREHEAT2_TOTAL;
-    #endif
-    #if PREHEAT_COUNT >= 3
-      case Preheat3:        return PREHEAT3_TOTAL;
-    #endif
-    #if PREHEAT_COUNT >= 4
-      case Preheat4:        return PREHEAT4_TOTAL;
-    #endif
-    #if PREHEAT_COUNT >= 5
-      case Preheat5:        return PREHEAT5_TOTAL;
+    #if HAS_PREHEAT
+      case Preheat1 ... CAT(Preheat, PREHEAT_COUNT):
+                            return PREHEAT_SUBMENU_TOTAL;
     #endif
     case Motion:            return MOTION_TOTAL;
     case HomeOffsets:       return HOMEOFFSETS_TOTAL;
@@ -4118,7 +3808,11 @@ uint8_t CrealityDWINClass::Get_Menu_Size(uint8_t menu) {
       case LevelManual:     return LEVELING_M_TOTAL;
     #endif
     case Tune:              return TUNE_TOTAL;
-    case PreheatHotend:     return PREHEATHOTEND_TOTAL;
+
+    #if HAS_PREHEAT && HAS_HOTEND
+      case PreheatHotend:   return PREHEATHOTEND_TOTAL;
+    #endif
+
     case ColorSettings:     return COLORSETTINGS_TOTAL;
   }
   return 0;

Marlin/src/lcd/e3v2/jyersui/dwin.h

@@ -60,11 +60,10 @@ enum menuID : uint8_t {
         PID,
           HotendPID,
           BedPID,
-        Preheat1,
-        Preheat2,
-        Preheat3,
-        Preheat4,
-        Preheat5,
+        #if HAS_PREHEAT
+          #define _PREHEAT_ID(N) Preheat##N,
+          REPEAT_1(PREHEAT_COUNT, _PREHEAT_ID)
+        #endif
       Motion,
         HomeOffsets,
         MaxSpeed,

Marlin/src/lcd/menu/menu_ubl.cpp

@@ -211,26 +211,13 @@ void _lcd_ubl_edit_mesh() {
     #if HAS_PREHEAT
       #if HAS_HEATED_BED
         #define VALIDATE_MESH_GCODE_ITEM(M) \
-          GCODES_ITEM_N_S(M, ui.get_preheat_label(M), MSG_UBL_VALIDATE_MESH_M, PSTR("G28\nG26CPI" STRINGIFY(M)))
+          GCODES_ITEM_N_S(M, ui.get_preheat_label(M), MSG_UBL_VALIDATE_MESH_M, PSTR("G28\nG26CPI" STRINGIFY(M)));
       #else
         #define VALIDATE_MESH_GCODE_ITEM(M) \
-          GCODES_ITEM_N_S(M, ui.get_preheat_label(M), MSG_UBL_VALIDATE_MESH_M, PSTR("G28\nG26CPB0I" STRINGIFY(M)))
+          GCODES_ITEM_N_S(M, ui.get_preheat_label(M), MSG_UBL_VALIDATE_MESH_M, PSTR("G28\nG26CPB0I" STRINGIFY(M)));
       #endif
-
-      VALIDATE_MESH_GCODE_ITEM(0);
-      #if PREHEAT_COUNT > 1
-        VALIDATE_MESH_GCODE_ITEM(1);
-        #if PREHEAT_COUNT > 2
-          VALIDATE_MESH_GCODE_ITEM(2);
-          #if PREHEAT_COUNT > 3
-            VALIDATE_MESH_GCODE_ITEM(3);
-            #if PREHEAT_COUNT > 4
-              VALIDATE_MESH_GCODE_ITEM(4);
-            #endif
-          #endif
-        #endif
-      #endif
-    #endif // HAS_PREHEAT
+      REPEAT(PREHEAT_COUNT, VALIDATE_MESH_GCODE_ITEM)
+    #endif
     ACTION_ITEM(MSG_UBL_VALIDATE_CUSTOM_MESH, _lcd_ubl_validate_custom_mesh);
     ACTION_ITEM(MSG_INFO_SCREEN, ui.return_to_status);
     END_MENU();