Fix Visual Micro "Arduino IDE for Visual Studio" support (#16418)

Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp

@@ -41,7 +41,7 @@
 #if !defined(USBCON) && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H))
 
   #include "MarlinSerial.h"
-  #include "../../Marlin.h"
+  #include "../../MarlinCore.h"
 
   template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_r MarlinSerial<Cfg>::rx_buffer = { 0, 0, { 0 } };
   template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_t MarlinSerial<Cfg>::tx_buffer = { 0 };

Marlin/src/HAL/HAL_AVR/watchdog.cpp

@@ -28,7 +28,7 @@
 
 #include "watchdog.h"
 
-#include "../../Marlin.h"
+#include "../../MarlinCore.h"
 
 // Initialize watchdog with 8s timeout, if possible. Otherwise, make it 4s.
 void watchdog_init() {

Marlin/src/HAL/HAL_DUE/MarlinSerial.cpp

@@ -31,7 +31,7 @@
 
 #include "MarlinSerial.h"
 #include "InterruptVectors.h"
-#include "../../Marlin.h"
+#include "../../MarlinCore.h"
 
 template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_r MarlinSerial<Cfg>::rx_buffer = { 0, 0, { 0 } };
 template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_t MarlinSerial<Cfg>::tx_buffer = { 0 };

Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp

@@ -63,7 +63,7 @@
 
 #include <U8glib.h>
 
-#include "../../../Marlin.h"
+#include "../../../MarlinCore.h"
 
 void spiBegin();
 void spiInit(uint8_t spiRate);

Marlin/src/HAL/HAL_DUE/watchdog.cpp

@@ -23,7 +23,7 @@
 #ifdef ARDUINO_ARCH_SAM
 
 #include "../../inc/MarlinConfig.h"
-#include "../../Marlin.h"
+#include "../../MarlinCore.h"
 #include "watchdog.h"
 
 // Override Arduino runtime to either config or disable the watchdog

Marlin/src/HAL/HAL_STM32_F4_F7/STM32F7/TMC2660.cpp

@@ -36,7 +36,7 @@
 #include "TMC2660.h"
 
 #include "../../../inc/MarlinConfig.h"
-#include "../../../Marlin.h"
+#include "../../../MarlinCore.h"
 #include "../../../module/stepper/indirection.h"
 #include "../../../module/printcounter.h"
 #include "../../../libs/duration_t.h"

Marlin/src/Marlin.cpp → Marlin/src/MarlinCore.cpp

@@ -28,7 +28,7 @@
  *  - https://github.com/grbl/grbl
  */
 
-#include "Marlin.h"
+#include "MarlinCore.h"
 
 #include "core/utility.h"
 #include "lcd/ultralcd.h"

Marlin/src/core/utility.cpp

@@ -22,7 +22,7 @@
 
 #include "utility.h"
 
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 #include "../module/temperature.h"
 
 void safe_delay(millis_t ms) {

Marlin/src/feature/Max7219_Debug_LEDs.cpp

@@ -45,7 +45,7 @@
 
 #include "../module/planner.h"
 #include "../module/stepper.h"
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 #include "../HAL/shared/Delay.h"
 
 #define HAS_SIDE_BY_SIDE (ENABLED(MAX7219_SIDE_BY_SIDE) && MAX7219_NUMBER_UNITS > 1)

Marlin/src/feature/babystep.cpp

@@ -25,7 +25,7 @@
 #if ENABLED(BABYSTEPPING)
 
 #include "babystep.h"
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 #include "../module/planner.h"
 #include "../module/stepper.h"
 

Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp

@@ -26,7 +26,7 @@
 
   #include "../bedlevel.h"
 
-  #include "../../../Marlin.h"
+  #include "../../../MarlinCore.h"
   #include "../../../HAL/shared/persistent_store_api.h"
   #include "../../../libs/hex_print_routines.h"
   #include "../../../module/configuration_store.h"

Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp

@@ -32,7 +32,7 @@
   #include "../../../module/delta.h"
 #endif
 
-#include "../../../Marlin.h"
+#include "../../../MarlinCore.h"
 #include <math.h>
 
 #if !UBL_SEGMENTED

Marlin/src/feature/dac/dac_dac084s085.cpp

@@ -10,7 +10,7 @@
 
 #include "dac_dac084s085.h"
 
-#include "../../Marlin.h"
+#include "../../MarlinCore.h"
 #include "../../module/stepper.h"
 #include "../../HAL/shared/Delay.h"
 

Marlin/src/feature/pause.cpp

@@ -29,7 +29,7 @@
 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 #include "../gcode/gcode.h"
 #include "../module/motion.h"
 #include "../module/planner.h"

Marlin/src/feature/power.cpp

@@ -31,7 +31,7 @@
 #include "power.h"
 #include "../module/temperature.h"
 #include "../module/stepper/indirection.h"
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 
 Power powerManager;
 

Marlin/src/feature/prusa_MMU2/mmu2.cpp

@@ -36,7 +36,7 @@ MMU2 mmu2;
 #include "../../module/temperature.h"
 #include "../../module/planner.h"
 #include "../../module/stepper/indirection.h"
-#include "../../Marlin.h"
+#include "../../MarlinCore.h"
 
 #if ENABLED(HOST_PROMPT_SUPPORT)
   #include "../../feature/host_actions.h"

Marlin/src/feature/runout.cpp

@@ -61,7 +61,7 @@ void FilamentSensorBase::filament_present(const uint8_t extruder) {
 //
 // Filament Runout event handler
 //
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 #include "../gcode/queue.h"
 
 #if ENABLED(HOST_ACTION_COMMANDS)

Marlin/src/feature/tmc_util.cpp

@@ -25,7 +25,7 @@
 #if HAS_TRINAMIC
 
 #include "tmc_util.h"
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 
 #include "../module/stepper/indirection.h"
 #include "../module/printcounter.h"

Marlin/src/gcode/bedlevel/G26.cpp

@@ -34,7 +34,7 @@
 #include "../../gcode/gcode.h"
 #include "../../feature/bedlevel/bedlevel.h"
 
-#include "../../Marlin.h"
+#include "../../MarlinCore.h"
 #include "../../module/planner.h"
 #include "../../module/stepper.h"
 #include "../../module/motion.h"

Marlin/src/gcode/bedlevel/G42.cpp

@@ -25,7 +25,7 @@
 #if HAS_MESH
 
 #include "../gcode.h"
-#include "../../Marlin.h" // for IsRunning()
+#include "../../MarlinCore.h" // for IsRunning()
 #include "../../module/motion.h"
 #include "../../module/probe.h" // for probe_offset
 #include "../../feature/bedlevel/bedlevel.h"

Marlin/src/gcode/calibrate/G425.cpp

@@ -20,7 +20,7 @@
  *
  */
 
-#include "../../Marlin.h"
+#include "../../MarlinCore.h"
 
 #if ENABLED(CALIBRATION_GCODE)
 

Marlin/src/gcode/calibrate/M100.cpp

@@ -28,7 +28,7 @@
 #include "../queue.h"
 #include "../../libs/hex_print_routines.h"
 
-#include "../../Marlin.h" // for idle()
+#include "../../MarlinCore.h" // for idle()
 
 /**
  * M100 Free Memory Watcher

Marlin/src/gcode/config/M200-M205.cpp

@@ -21,7 +21,7 @@
  */
 
 #include "../gcode.h"
-#include "../../Marlin.h"
+#include "../../MarlinCore.h"
 #include "../../module/planner.h"
 
 #if DISABLED(NO_VOLUMETRICS)

Marlin/src/gcode/config/M217.cpp

@@ -27,7 +27,7 @@
 #include "../gcode.h"
 #include "../../module/tool_change.h"
 
-#include "../../Marlin.h" // for SP_X_STR, etc.
+#include "../../MarlinCore.h" // for SP_X_STR, etc.
 
 extern const char SP_X_STR[], SP_Y_STR[], SP_Z_STR[];
 

Marlin/src/gcode/config/M43.cpp

@@ -25,7 +25,7 @@
 #if ENABLED(PINS_DEBUGGING)
 
 #include "../gcode.h"
-#include "../../Marlin.h" // for pin_is_protected
+#include "../../MarlinCore.h" // for pin_is_protected
 #include "../../pins/pinsDebug.h"
 #include "../../module/endstops.h"
 

Marlin/src/gcode/control/M108_M112_M410.cpp

@@ -25,7 +25,7 @@
 #if DISABLED(EMERGENCY_PARSER)
 
 #include "../gcode.h"
-#include "../../Marlin.h" // for wait_for_heatup, kill, quickstop_stepper
+#include "../../MarlinCore.h" // for wait_for_heatup, kill, quickstop_stepper
 
 /**
  * M108: Stop the waiting for heaters in M109, M190, M303. Does not affect the target temperature.

Marlin/src/gcode/control/M17_M18_M84.cpp

@@ -21,7 +21,7 @@
  */
 
 #include "../gcode.h"
-#include "../../Marlin.h" // for stepper_inactive_time, disable_e_steppers
+#include "../../MarlinCore.h" // for stepper_inactive_time, disable_e_steppers
 #include "../../lcd/ultralcd.h"
 #include "../../module/stepper.h"
 

Marlin/src/gcode/control/M226.cpp

@@ -21,7 +21,7 @@
  */
 
 #include "../gcode.h"
-#include "../../Marlin.h" // for pin_is_protected and idle()
+#include "../../MarlinCore.h" // for pin_is_protected and idle()
 #include "../../module/stepper.h"
 
 /**

Marlin/src/gcode/control/M42.cpp

@@ -21,7 +21,7 @@
  */
 
 #include "../gcode.h"
-#include "../../Marlin.h" // for pin_is_protected
+#include "../../MarlinCore.h" // for pin_is_protected
 #include "../../inc/MarlinConfig.h"
 
 #if FAN_COUNT > 0

Marlin/src/gcode/control/M80_M81.cpp

@@ -32,7 +32,7 @@
 #endif
 
 #if HAS_SUICIDE
-  #include "../../Marlin.h"
+  #include "../../MarlinCore.h"
 #endif
 
 #if ENABLED(PSU_CONTROL)

Marlin/src/gcode/control/M85.cpp

@@ -21,7 +21,7 @@
  */
 
 #include "../gcode.h"
-#include "../../Marlin.h" // for max_inactive_time
+#include "../../MarlinCore.h" // for max_inactive_time
 
 /**
  * M85: Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default)

Marlin/src/gcode/control/M999.cpp

@@ -23,7 +23,7 @@
 #include "../gcode.h"
 
 #include "../../lcd/ultralcd.h" // for lcd_reset_alert_level
-#include "../../Marlin.h"       // for Running
+#include "../../MarlinCore.h"   // for Running
 #include "../queue.h"           // for flush_and_request_resend
 
 /**

Marlin/src/gcode/feature/camera/M240.cpp

@@ -32,7 +32,7 @@
 #endif
 
 #if defined(PHOTO_POSITION) && PHOTO_DELAY_MS > 0
-  #include "../../../Marlin.h" // for idle()
+  #include "../../../MarlinCore.h" // for idle()
 #endif
 
 #ifdef PHOTO_RETRACT_MM

Marlin/src/gcode/feature/filwidth/M404-M407.cpp

@@ -27,7 +27,7 @@
 #include "../../../feature/filwidth.h"
 #include "../../../module/planner.h"
 #include "../../../module/temperature.h"
-#include "../../../Marlin.h"
+#include "../../../MarlinCore.h"
 #include "../../gcode.h"
 
 /**

Marlin/src/gcode/feature/i2c/M260_M261.cpp

@@ -26,7 +26,7 @@
 
 #include "../../gcode.h"
 
-#include "../../../Marlin.h" // for i2c
+#include "../../../MarlinCore.h" // for i2c
 
 /**
  * M260: Send data to a I2C slave device

Marlin/src/gcode/feature/pause/M701_M702.cpp

@@ -25,7 +25,7 @@
 #if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
 
 #include "../../gcode.h"
-#include "../../../Marlin.h"
+#include "../../../MarlinCore.h"
 #include "../../../module/motion.h"
 #include "../../../module/temperature.h"
 #include "../../../feature/pause.h"

Marlin/src/gcode/gcode.cpp

@@ -49,7 +49,7 @@ GcodeSuite gcode;
   #include "../feature/cancel_object.h"
 #endif
 
-#include "../Marlin.h" // for idle() and suspend_auto_report
+#include "../MarlinCore.h" // for idle() and suspend_auto_report
 
 millis_t GcodeSuite::previous_move_ms;
 

Marlin/src/gcode/host/M16.cpp

@@ -25,7 +25,7 @@
 #if ENABLED(EXPECTED_PRINTER_CHECK)
 
 #include "../gcode.h"
-#include "../../Marlin.h"
+#include "../../MarlinCore.h"
 
 /**
  * M16: Expected Printer Check

Marlin/src/gcode/host/M876.cpp

@@ -25,7 +25,7 @@
 
 #include "../../feature/host_actions.h"
 #include "../gcode.h"
-#include "../../Marlin.h"
+#include "../../MarlinCore.h"
 
 /**
  * M876: Handle Prompt Response

Marlin/src/gcode/motion/G0_G1.cpp

@@ -23,7 +23,7 @@
 #include "../gcode.h"
 #include "../../module/motion.h"
 
-#include "../../Marlin.h"
+#include "../../MarlinCore.h"
 
 #if BOTH(FWRETRACT, FWRETRACT_AUTORETRACT)
   #include "../../feature/fwretract.h"

Marlin/src/gcode/motion/G5.cpp

@@ -35,7 +35,7 @@
  */
 
 #include "../gcode.h"
-#include "../../Marlin.h" // for IsRunning()
+#include "../../MarlinCore.h" // for IsRunning()
 
 /**
  * G5: Cubic B-spline

Marlin/src/gcode/parser.cpp

@@ -26,7 +26,7 @@
 
 #include "parser.h"
 
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 
 #if NUM_SERIAL > 1
   #include "queue.h"

Marlin/src/gcode/queue.cpp

@@ -33,7 +33,7 @@ GCodeQueue queue;
 #include "../sd/cardreader.h"
 #include "../module/planner.h"
 #include "../module/temperature.h"
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 
 #if ENABLED(PRINTER_EVENT_LEDS)
   #include "../feature/leds/printer_event_leds.h"

Marlin/src/gcode/scara/M360-M364.cpp

@@ -27,7 +27,7 @@
 #include "../gcode.h"
 #include "../../module/scara.h"
 #include "../../module/motion.h"
-#include "../../Marlin.h" // for IsRunning()
+#include "../../MarlinCore.h" // for IsRunning()
 
 inline bool SCARA_move_to_cal(const uint8_t delta_a, const uint8_t delta_b) {
   if (IsRunning()) {

Marlin/src/gcode/sdcard/M24_M25.cpp

@@ -42,7 +42,7 @@
   #include "../../feature/power_loss_recovery.h"
 #endif
 
-#include "../../Marlin.h" // for startOrResumeJob
+#include "../../MarlinCore.h" // for startOrResumeJob
 
 /**
  * M24: Start or Resume SD Print

Marlin/src/gcode/sdcard/M32.cpp

@@ -28,7 +28,7 @@
 #include "../../sd/cardreader.h"
 #include "../../module/planner.h" // for synchronize()
 
-#include "../../Marlin.h" // for startOrResumeJob
+#include "../../MarlinCore.h" // for startOrResumeJob
 
 /**
  * M32: Select file and start SD Print

Marlin/src/gcode/stats/M75-M78.cpp

@@ -24,7 +24,7 @@
 #include "../../module/printcounter.h"
 #include "../../lcd/ultralcd.h"
 
-#include "../../Marlin.h" // for startOrResumeJob
+#include "../../MarlinCore.h" // for startOrResumeJob
 
 /**
  * M75: Start print timer

Marlin/src/gcode/temperature/M104_M109.cpp

@@ -30,7 +30,7 @@
 #include "../../module/planner.h"
 #include "../../lcd/ultralcd.h"
 
-#include "../../Marlin.h" // for startOrResumeJob, etc.
+#include "../../MarlinCore.h" // for startOrResumeJob, etc.
 
 #if ENABLED(PRINTJOB_TIMER_AUTOSTART)
   #include "../../module/printcounter.h"

Marlin/src/gcode/temperature/M140_M190.cpp

@@ -37,7 +37,7 @@
   #include "../../feature/leds/leds.h"
 #endif
 
-#include "../../Marlin.h" // for wait_for_heatup, idle, startOrResumeJob
+#include "../../MarlinCore.h" // for wait_for_heatup, idle, startOrResumeJob
 
 /**
  * M140: Set bed temperature

Marlin/src/gcode/temperature/M141_M191.cpp

@@ -38,7 +38,7 @@
   #include "../../feature/leds/leds.h"
 #endif
 
-#include "../../Marlin.h" // for wait_for_heatup, idle, startOrResumeJob
+#include "../../MarlinCore.h" // for wait_for_heatup, idle, startOrResumeJob
 
 /**
  * M141: Set chamber temperature

Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp

@@ -17,7 +17,7 @@
 #if HAS_CHARACTER_LCD
 
 #include "../ultralcd.h"
-#include "../../Marlin.h"
+#include "../../MarlinCore.h"
 
 #include "ultralcd_HD44780.h"
 

Marlin/src/lcd/dogm/lcdprint_u8g.cpp

@@ -14,7 +14,7 @@
 #include "ultralcd_DOGM.h"
 
 #include "../ultralcd.h"
-#include "../../Marlin.h"
+#include "../../MarlinCore.h"
 
 #include "../fontutils.h"
 #include "u8g_fontutf8.h"

Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp

@@ -60,7 +60,7 @@
 #endif
 
 #if ENABLED(LCD_SHOW_E_TOTAL)
-  #include "../../Marlin.h" // for printingIsActive
+  #include "../../MarlinCore.h" // for printingIsActive
 #endif
 
 #define TEXT_MODE_LCD_WIDTH 16

Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.cpp

@@ -32,7 +32,7 @@
 
 #include "../../ui_api.h"
 
-#include "../../../../Marlin.h"
+#include "../../../../MarlinCore.h"
 #include "../../../../module/temperature.h"
 #include "../../../../module/motion.h"
 #include "../../../../gcode/queue.h"

Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.h

@@ -25,7 +25,7 @@
 
 #include "../../../../inc/MarlinConfigPre.h"
 
-#include "../../../../Marlin.h"
+#include "../../../../MarlinCore.h"
 #include "DGUSVPVariable.h"
 
 enum DGUSLCD_Screens : uint8_t;

Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/language/language.cpp

@@ -20,7 +20,7 @@
  ****************************************************************************/
 
 
-#include "../../../../../Marlin.h"
+#include "../../../../../MarlinCore.h"
 
 #include "language.h"
 

Marlin/src/lcd/fontutils.cpp

@@ -11,7 +11,7 @@
 
 #if HAS_SPI_LCD
   #include "ultralcd.h"
-  #include "../Marlin.h"
+  #include "../MarlinCore.h"
 #endif
 
 #include "fontutils.h"

Marlin/src/lcd/menu/menu.cpp

@@ -213,7 +213,7 @@ void MenuItem_bool::action(PGM_P const, bool * const ptr, screenFunc_t callback)
 ///////////////// Menu Tree ////////////////
 ////////////////////////////////////////////
 
-#include "../../Marlin.h"
+#include "../../MarlinCore.h"
 
 bool printer_busy() {
   return planner.movesplanned() || printingIsActive();

Marlin/src/lcd/menu/menu_tune.cpp

@@ -32,7 +32,7 @@
 #include "../../module/motion.h"
 #include "../../module/planner.h"
 #include "../../module/temperature.h"
-#include "../../Marlin.h"
+#include "../../MarlinCore.h"
 
 #if HAS_LEVELING
   #include "../../feature/bedlevel/bedlevel.h"

Marlin/src/lcd/ultralcd.cpp

@@ -30,11 +30,13 @@
   #include "../feature/host_actions.h"
 #endif
 
+// All displays share the MarlinUI class
 #include "ultralcd.h"
 MarlinUI ui;
 
-// All displays share the MarlinUI class
 #if HAS_DISPLAY
+  #include "../module/printcounter.h"
+  #include "../MarlinCore.h"
   #include "../gcode/queue.h"
   #include "fontutils.h"
   #include "../sd/cardreader.h"
@@ -91,11 +93,8 @@ MarlinUI ui;
 #include "../sd/cardreader.h"
 #include "../module/temperature.h"
 #include "../module/planner.h"
-#include "../module/printcounter.h"
 #include "../module/motion.h"
 
-#include "../Marlin.h"
-
 #if ENABLED(POWER_LOSS_RECOVERY)
   #include "../feature/power_loss_recovery.h"
 #endif
@@ -1443,9 +1442,6 @@ void MarlinUI::update() {
     #endif
   }
 
-  #include "../Marlin.h"
-  #include "../module/printcounter.h"
-
   PGM_P print_paused = GET_TEXT(MSG_PRINT_PAUSED);
 
   /**

Marlin/src/lcd/ultralcd.h

@@ -37,7 +37,7 @@
 
 #if HAS_SPI_LCD
 
-  #include "../Marlin.h"
+  #include "../MarlinCore.h"
 
   #if ENABLED(ADVANCED_PAUSE_FEATURE)
     #include "../feature/pause.h"

Marlin/src/libs/nozzle.cpp

@@ -28,7 +28,7 @@
 
 Nozzle nozzle;
 
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 #include "../module/motion.h"
 
 #if ENABLED(NOZZLE_CLEAN_FEATURE)

Marlin/src/module/configuration_store.cpp

@@ -54,7 +54,7 @@
 #include "../core/language.h"
 #include "../libs/vector_3.h"   // for matrix_3x3
 #include "../gcode/gcode.h"
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 
 #if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
   #include "../HAL/shared/persistent_store_api.h"

Marlin/src/module/delta.cpp

@@ -35,7 +35,7 @@
 #include "planner.h"
 #include "endstops.h"
 #include "../lcd/ultralcd.h"
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 
 #if HAS_BED_PROBE
   #include "probe.h"

Marlin/src/module/endstops.cpp

@@ -27,7 +27,7 @@
 #include "endstops.h"
 #include "stepper.h"
 
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 #include "../sd/cardreader.h"
 #include "temperature.h"
 #include "../lcd/ultralcd.h"

Marlin/src/module/planner.cpp

@@ -70,7 +70,7 @@
 #include "../core/language.h"
 #include "../gcode/parser.h"
 
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 
 #if HAS_LEVELING
   #include "../feature/bedlevel/bedlevel.h"

Marlin/src/module/planner.h

@@ -30,7 +30,7 @@
  * Copyright (c) 2009-2011 Simen Svale Skogsrud
  */
 
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 
 #include "motion.h"
 #include "../gcode/queue.h"

Marlin/src/module/planner_bezier.cpp

@@ -35,7 +35,7 @@
 #include "motion.h"
 #include "temperature.h"
 
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 #include "../core/language.h"
 #include "../gcode/queue.h"
 

Marlin/src/module/printcounter.cpp

@@ -34,7 +34,7 @@ Stopwatch print_job_timer;      // Global Print Job Timer instance
 #endif
 
 #include "printcounter.h"
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 #include "../HAL/shared/persistent_store_api.h"
 
 #if HAS_BUZZER && SERVICE_WARNING_BUZZES > 0

Marlin/src/module/probe.cpp

@@ -38,7 +38,7 @@
 #include "../gcode/gcode.h"
 #include "../lcd/ultralcd.h"
 
-#include "../Marlin.h" // for stop(), disable_e_steppers, wait_for_user
+#include "../MarlinCore.h" // for stop(), disable_e_steppers, wait_for_user
 
 #if HAS_LEVELING
   #include "../feature/bedlevel/bedlevel.h"

Marlin/src/module/stepper.cpp

@@ -98,7 +98,7 @@ Stepper stepper; // Singleton
 #include "../core/language.h"
 #include "../gcode/queue.h"
 #include "../sd/cardreader.h"
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 #include "../HAL/shared/Delay.h"
 
 #if MB(ALLIGATOR)

Marlin/src/module/temperature.cpp

@@ -27,7 +27,7 @@
 #include "temperature.h"
 #include "endstops.h"
 
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 #include "../lcd/ultralcd.h"
 #include "planner.h"
 #include "../core/language.h"

Marlin/src/module/tool_change.cpp

@@ -29,7 +29,7 @@
 #include "planner.h"
 #include "temperature.h"
 
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 
 #define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
 #include "../core/debug_out.h"

Marlin/src/sd/Sd2Card.cpp

@@ -38,7 +38,7 @@
 
 #include "Sd2Card.h"
 
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 
 #if ENABLED(SD_CHECK_AND_RETRY)
   static bool crcSupported = true;

Marlin/src/sd/SdBaseFile.cpp

@@ -33,7 +33,7 @@
 
 #include "SdBaseFile.h"
 
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 SdBaseFile* SdBaseFile::cwd_ = 0;   // Pointer to Current Working Directory
 
 // callback function for date/time

Marlin/src/sd/SdVolume.cpp

@@ -33,7 +33,7 @@
 
 #include "SdVolume.h"
 
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 
 #if !USE_MULTIPLE_CARDS
   // raw block cache

Marlin/src/sd/cardreader.cpp

@@ -26,7 +26,7 @@
 
 #include "cardreader.h"
 
-#include "../Marlin.h"
+#include "../MarlinCore.h"
 #include "../lcd/ultralcd.h"
 #include "../module/planner.h"
 #include "../module/printcounter.h"

Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp

@@ -40,7 +40,7 @@
 
 #if ENABLED(USB_FLASH_DRIVE_SUPPORT)
 
-#include "../../Marlin.h"
+#include "../../MarlinCore.h"
 #include "../../core/serial.h"
 #include "../../module/temperature.h"
 

buildroot/share/scripts/createSpeedLookupTable.py

@@ -22,7 +22,7 @@ timer_freq = cpu_freq / args.divider
 print("#ifndef SPEED_LOOKUPTABLE_H")
 print("#define SPEED_LOOKUPTABLE_H")
 print()
-print('#include "Marlin.h"')
+print('#include "MarlinCore.h"')
 print()
 
 print("const uint16_t speed_lookuptable_fast[256][2] PROGMEM = {")