♻️ Set Progress without LCD (#24767)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

.gitignore

 imgui.ini
 eeprom.dat
 spi_flash.bin
+fs.img
 
 #cmake
 CMakeLists.txt

Marlin/Configuration_adv.h

   // On the Info Screen, display XY with one decimal place when possible
   //#define LCD_DECIMAL_SMALL_XY
 
-  // Add an 'M73' G-code to set the current percentage
-  //#define LCD_SET_PROGRESS_MANUALLY
-
   // Show the E position (filament used) during printing
   //#define LCD_SHOW_E_TOTAL
 
       //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
     #endif
     #if ENABLED(NEO2_COLOR_PRESETS)
-      #define NEO2_USER_PRESET_RED        255  // User defined RED value
-      #define NEO2_USER_PRESET_GREEN      128  // User defined GREEN value
-      #define NEO2_USER_PRESET_BLUE         0  // User defined BLUE value
-      #define NEO2_USER_PRESET_WHITE      255  // User defined WHITE value
-      #define NEO2_USER_PRESET_BRIGHTNESS 255  // User defined intensity
-      //#define NEO2_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup for the second strip
+      #define NEO2_USER_PRESET_RED        255 // User defined RED value
+      #define NEO2_USER_PRESET_GREEN      128 // User defined GREEN value
+      #define NEO2_USER_PRESET_BLUE         0 // User defined BLUE value
+      #define NEO2_USER_PRESET_WHITE      255 // User defined WHITE value
+      #define NEO2_USER_PRESET_BRIGHTNESS 255 // User defined intensity
+      //#define NEO2_USER_PRESET_STARTUP      // Have the printer display the user preset color on startup for the second strip
     #endif
   #endif
 
-#endif
+#endif // HAS_DISPLAY || DWIN_LCD_PROUI
 
-// LCD Print Progress options
-#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
-  #if CAN_SHOW_REMAINING_TIME
-    //#define SHOW_REMAINING_TIME         // Display estimated time to completion
-    #if ENABLED(SHOW_REMAINING_TIME)
-      //#define USE_M73_REMAINING_TIME    // Use remaining time from M73 command instead of estimation
-      //#define ROTATE_PROGRESS_DISPLAY   // Display (P)rogress, (E)lapsed, and (R)emaining time
-    #endif
+// Add the G-code 'M73' to set / report the current job progress
+//#define SET_PROGRESS_MANUALLY
+#if ENABLED(SET_PROGRESS_MANUALLY)
+  //#define SET_PROGRESS_PERCENT          // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
+  #if ENABLED(SET_INTERACTION_TIME)
+    #define SHOW_INTERACTION_TIME         // Display time until next user interaction ('C' = filament change)
   #endif
+  //#define M73_REPORT                    // Report progress to host with 'M73'
+#endif
 
-  #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI)
-    //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
-  #endif
+// LCD Print Progress options, multiple can be rotated depending on screen layout
+#if HAS_DISPLAY && EITHER(SDSUPPORT, SET_PROGRESS_MANUALLY)
+  #define SHOW_PROGRESS_PERCENT           // Show print progress percentage (doesn't affect progress bar)
+  #define SHOW_ELAPSED_TIME               // Display elapsed printing time (prefix 'E')
+  //#define SHOW_REMAINING_TIME           // Display estimated time to completion (prefix 'R')
+
+  //#define PRINT_PROGRESS_SHOW_DECIMALS  // Show/report progress with decimal digits, not all UIs support this
 
   #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
     //#define LCD_PROGRESS_BAR            // Show a progress bar on HD44780 LCDs for SD printing
     #if ENABLED(LCD_PROGRESS_BAR)
       #define PROGRESS_BAR_BAR_TIME 2000  // (ms) Amount of time to show the bar
       #define PROGRESS_BAR_MSG_TIME 3000  // (ms) Amount of time to show the status message
-      #define PROGRESS_MSG_EXPIRE   0     // (ms) Amount of time to retain the status message (0=forever)
+      #define PROGRESS_MSG_EXPIRE      0  // (ms) Amount of time to retain the status message (0=forever)
       //#define PROGRESS_MSG_ONCE         // Show the message for MSG_TIME then clear it
       //#define LCD_PROGRESS_BAR_TEST     // Add a menu item to test the progress bar
     #endif
 #endif // HAS_MARLINUI_U8GLIB
 
 #if HAS_MARLINUI_U8GLIB || IS_DWIN_MARLINUI
-  // Show SD percentage next to the progress bar
-  //#define SHOW_SD_PERCENT
-
-  // Enable to save many cycles by drawing a hollow frame on Menu Screens
-  #define MENU_HOLLOW_FRAME
-
-  // Swap the CW/CCW indicators in the graphics overlay
-  //#define OVERLAY_GFX_REVERSE
+  #define MENU_HOLLOW_FRAME           // Enable to save many cycles by drawing a hollow frame on Menu Screens
+  //#define OVERLAY_GFX_REVERSE       // Swap the CW/CCW indicators in the graphics overlay
 #endif
 
 //
  */
 //#define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
-  //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
+  //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L.
   #define LIN_ADVANCE_K 0.22    // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
 
 /**
  * Mechanical Gantry Calibration
- * Modern replacement for the Prusa TMC_Z_CALIBRATION.
+ * Modern replacement for the Průša TMC_Z_CALIBRATION.
  * Adds capability to work with any adjustable current drivers.
  * Implemented as G34 because M915 is deprecated.
  * @section calibrate

Marlin/src/MarlinCore.cpp

     TERN_(GCODE_REPEAT_MARKERS, repeat.reset());
     TERN_(CANCEL_OBJECTS, cancelable.reset());
     TERN_(LCD_SHOW_E_TOTAL, e_move_accumulator = 0);
-    #if BOTH(LCD_SET_PROGRESS_MANUALLY, USE_M73_REMAINING_TIME)
+    #if ENABLED(SET_REMAINING_TIME)
       ui.reset_remaining_time();
     #endif
   }

Marlin/src/gcode/gcode.cpp

         case 48: M48(); break;                                    // M48: Z probe repeatability test
       #endif
 
-      #if ENABLED(LCD_SET_PROGRESS_MANUALLY)
-        case 73: M73(); break;                                    // M73: Set progress percentage (for display on LCD)
+      #if ENABLED(SET_PROGRESS_MANUALLY)
+        case 73: M73(); break;                                    // M73: Set progress percentage
       #endif
 
       case 75: M75(); break;                                      // M75: Start print timer

Marlin/src/gcode/gcode.h

  * M43  - Display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins (Requires PINS_DEBUGGING)
  * M48  - Measure Z Probe repeatability: M48 P<points> X<pos> Y<pos> V<level> E<engage> L<legs> S<chizoid>. (Requires Z_MIN_PROBE_REPEATABILITY_TEST)
  *
- * M73  - Set the progress percentage. (Requires LCD_SET_PROGRESS_MANUALLY)
+ * M73  - Set the progress percentage. (Requires SET_PROGRESS_MANUALLY)
  * M75  - Start the print job timer.
  * M76  - Pause the print job timer.
  * M77  - Stop the print job timer.
     static void M48();
   #endif
 
-  #if ENABLED(LCD_SET_PROGRESS_MANUALLY)
+  #if ENABLED(SET_PROGRESS_MANUALLY)
     static void M73();
   #endif
 

Marlin/src/gcode/host/M115.cpp

     cap_line(F("LEVELING_DATA"), ENABLED(HAS_LEVELING));
 
     // BUILD_PERCENT (M73)
-    cap_line(F("BUILD_PERCENT"), ENABLED(LCD_SET_PROGRESS_MANUALLY));
+    cap_line(F("BUILD_PERCENT"), ENABLED(SET_PROGRESS_PERCENT));
 
     // SOFTWARE_POWER (M80, M81)
     cap_line(F("SOFTWARE_POWER"), ENABLED(PSU_CONTROL));

Marlin/src/gcode/lcd/M73.cpp

 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(LCD_SET_PROGRESS_MANUALLY)
+#if ENABLED(SET_PROGRESS_MANUALLY)
 
 #include "../gcode.h"
 #include "../../lcd/marlinui.h"
 #include "../../sd/cardreader.h"
+#include "../../libs/numtostr.h"
 
 #if ENABLED(DWIN_LCD_PROUI)
   #include "../../lcd/e3v2/proui/dwin.h"
 #endif
 
+#if ENABLED(M73_REPORT)
+  #define M73_REPORT_PRUSA
+#endif
+
 /**
  * M73: Set percentage complete (for display on LCD)
  *
  * Example:
- *   M73 P25 ; Set progress to 25%
+ *   M73 P25.63 ; Set progress to 25.63%
+ *   M73 R456   ; Set remaining time to 456 minutes
+ *   M73 C12    ; Set next interaction countdown to 12 minutes
+ *   M73        ; Report current values
+ *
+ * Use a shorter-than-Průša report format:
+ * M73 Percent done: ---%; Time left: -----m; Change: -----m;
+ *
+ * When PRINT_PROGRESS_SHOW_DECIMALS is enabled - reports percent with 100 / 23.4 / 3.45 format
+ *
  */
 void GcodeSuite::M73() {
 
 
   #else
 
-    if (parser.seenval('P'))
-      ui.set_progress((PROGRESS_SCALE) > 1
-        ? parser.value_float() * (PROGRESS_SCALE)
-        : parser.value_byte()
-      );
+    #if ENABLED(SET_PROGRESS_PERCENT)
+      if (parser.seenval('P'))
+        ui.set_progress((PROGRESS_SCALE) > 1
+          ? parser.value_float() * (PROGRESS_SCALE)
+          : parser.value_byte()
+        );
+    #endif
 
-    #if ENABLED(USE_M73_REMAINING_TIME)
+    #if ENABLED(SET_REMAINING_TIME)
       if (parser.seenval('R')) ui.set_remaining_time(60 * parser.value_ulong());
     #endif
 
+    #if ENABLED(SET_INTERACTION_TIME)
+      if (parser.seenval('C')) ui.set_interaction_time(60 * parser.value_ulong());
+    #endif
+
+  #endif
+
+  #if ENABLED(M73_REPORT)
+  {
+    SERIAL_ECHO_MSG(
+        TERN(M73_REPORT_PRUSA, "M73 Percent done: ", "Progress: ")
+      , TERN(PRINT_PROGRESS_SHOW_DECIMALS, permyriadtostr4(ui.get_progress_permyriad()), ui.get_progress_percent())
+      #if ENABLED(SET_REMAINING_TIME)
+        , TERN(M73_REPORT_PRUSA, "; Print time remaining in mins: ", "%; Time left: "), ui.remaining_time / 60
+      #endif
+      #if ENABLED(SET_INTERACTION_TIME)
+        , TERN(M73_REPORT_PRUSA, "; Change in mins: ", "m; Change: "), ui.interaction_time / 60
+      #endif
+      , TERN(M73_REPORT_PRUSA, ";", "m")
+    );
+  }
   #endif
 }
 
-#endif // LCD_SET_PROGRESS_MANUALLY
+#endif // SET_PROGRESS_MANUALLY

Marlin/src/gcode/sd/M1001.cpp

   #include "../queue.h"
 #endif
 
-#if EITHER(LCD_SET_PROGRESS_MANUALLY, SD_REPRINT_LAST_SELECTED_FILE)
+#if EITHER(SET_PROGRESS_MANUALLY, SD_REPRINT_LAST_SELECTED_FILE)
   #include "../../lcd/marlinui.h"
 #endif
 
   process_subcommands_now(F("M77"));
 
   // Set the progress bar "done" state
-  TERN_(LCD_SET_PROGRESS_MANUALLY, ui.set_progress_done());
+  TERN_(SET_PROGRESS_PERCENT, ui.set_progress_done());
 
   // Announce SD file completion
   {

Marlin/src/gcode/sd/M23.cpp

   for (char *fn = parser.string_arg; *fn; ++fn) if (*fn == ' ') *fn = '\0';
   card.openFileRead(parser.string_arg);
 
-  TERN_(LCD_SET_PROGRESS_MANUALLY, ui.set_progress(0));
+  TERN_(SET_PROGRESS_PERCENT, ui.set_progress(0));
 }
 
 #endif // SDSUPPORT

Marlin/src/inc/Conditionals_LCD.h

   #define HAS_MANUAL_MOVE_MENU 1
 #endif
 
-#if ANY(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, IS_DWIN_MARLINUI, DWIN_CREALITY_LCD_JYERSUI)
-  #define CAN_SHOW_REMAINING_TIME 1
-#endif
-
 #if HAS_MARLINUI_U8GLIB
   #ifndef LCD_PIXEL_WIDTH
     #define LCD_PIXEL_WIDTH 128

Marlin/src/inc/Conditionals_adv.h

   #undef MENU_ADDAUTOSTART
 #endif
 
-#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
+#if EITHER(SDSUPPORT, SET_PROGRESS_MANUALLY)
   #define HAS_PRINT_PROGRESS 1
 #endif
 
+#if DISABLED(SET_PROGRESS_MANUALLY)
+  #undef SET_REMAINING_TIME
+  #undef SET_INTERACTION_TIME
+  #undef M73_REPORT
+#endif
+
 #if ANY(HAS_MARLINUI_MENU, ULTIPANEL_FEEDMULTIPLY, SOFT_RESET_ON_KILL)
   #define HAS_ENCODER_ACTION 1
 #endif

Marlin/src/inc/SanityCheck.h

 #elif defined(MKS_LCD12864)
   #error "MKS_LCD12864 is now MKS_LCD12864A or MKS_LCD12864B."
 #elif defined(DOGM_SD_PERCENT)
-  #error "DOGM_SD_PERCENT is now SHOW_SD_PERCENT."
+  #error "DOGM_SD_PERCENT is now SHOW_PROGRESS_PERCENT."
 #elif defined(NEOPIXEL_BKGD_LED_INDEX)
   #error "NEOPIXEL_BKGD_LED_INDEX is now NEOPIXEL_BKGD_INDEX_FIRST."
 #elif defined(TEMP_SENSOR_1_AS_REDUNDANT)
   #error "TOUCH_IDLE_SLEEP (seconds) is now TOUCH_IDLE_SLEEP_MINS (minutes)."
 #elif defined(LCD_BACKLIGHT_TIMEOUT)
   #error "LCD_BACKLIGHT_TIMEOUT (seconds) is now LCD_BACKLIGHT_TIMEOUT_MINS (minutes)."
+#elif defined(LCD_SET_PROGRESS_MANUALLY)
+  #error "LCD_SET_PROGRESS_MANUALLY is now SET_PROGRESS_MANUALLY."
+#elif defined(USE_M73_REMAINING_TIME)
+  #error "USE_M73_REMAINING_TIME is now SET_REMAINING_TIME."
+#elif defined(SHOW_SD_PERCENT)
+  #error "SHOW_SD_PERCENT is now SHOW_PROGRESS_PERCENT."
 #endif
 
 // L64xx stepper drivers have been removed
  * Progress Bar
  */
 #if ENABLED(LCD_PROGRESS_BAR)
-  #if NONE(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
-    #error "LCD_PROGRESS_BAR requires SDSUPPORT or LCD_SET_PROGRESS_MANUALLY."
+  #if NONE(SDSUPPORT, SET_PROGRESS_MANUALLY)
+    #error "LCD_PROGRESS_BAR requires SDSUPPORT or SET_PROGRESS_MANUALLY."
   #elif NONE(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
     #error "LCD_PROGRESS_BAR only applies to HD44780 character LCD and TFTGLCD_PANEL_(SPI|I2C)."
   #elif HAS_MARLINUI_U8GLIB || IS_DWIN_MARLINUI
   #elif PROGRESS_MSG_EXPIRE < 0
     #error "PROGRESS_MSG_EXPIRE must be greater than or equal to 0."
   #endif
-#elif ENABLED(LCD_SET_PROGRESS_MANUALLY) && NONE(HAS_MARLINUI_U8GLIB, HAS_GRAPHICAL_TFT, HAS_MARLINUI_HD44780, EXTENSIBLE_UI, HAS_DWIN_E3V2, IS_DWIN_MARLINUI)
-  #error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR, Character LCD, Graphical LCD, TFT, DWIN_CREALITY_LCD, DWIN_LCD_PROUI, DWIN_CREALITY_LCD_JYERSUI, DWIN_MARLINUI_*, OR EXTENSIBLE_UI."
 #endif
 
-#if ENABLED(USE_M73_REMAINING_TIME) && DISABLED(LCD_SET_PROGRESS_MANUALLY)
-  #error "USE_M73_REMAINING_TIME requires LCD_SET_PROGRESS_MANUALLY"
+#if ENABLED(SET_PROGRESS_MANUALLY) && NONE(SET_PROGRESS_PERCENT, SET_REMAINING_TIME, SET_INTERACTION_TIME)
+  #error "SET_PROGRESS_MANUALLY requires at least one of SET_PROGRESS_PERCENT, SET_REMAINING_TIME, SET_INTERACTION_TIME to be enabled."
+#endif
+
+#if HAS_LCDPRINT && LCD_HEIGHT < 4 && ANY(SHOW_PROGRESS_PERCENT, SHOW_ELAPSED_TIME, SHOW_REMAINING_TIME, SHOW_INTERACTION_TIME)
+  #error "Displays with fewer than 4 rows of text can't show progress values."
 #endif
 
 #if !HAS_MARLINUI_MENU && ENABLED(SD_REPRINT_LAST_SELECTED_FILE)
   #error "COOLANT_FLOOD requires COOLANT_FLOOD_PIN to be defined."
 #endif
 
-#if NONE(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI, IS_DWIN_MARLINUI) && ENABLED(PRINT_PROGRESS_SHOW_DECIMALS)
-  #error "PRINT_PROGRESS_SHOW_DECIMALS currently requires a Graphical LCD."
-#endif
-
 #if HAS_ADC_BUTTONS && defined(ADC_BUTTON_DEBOUNCE_DELAY) && ADC_BUTTON_DEBOUNCE_DELAY < 16
   #error "ADC_BUTTON_DEBOUNCE_DELAY must be greater than 16."
 #endif

Marlin/src/lcd/HD44780/marlinui_HD44780.cpp

   _draw_heater_status(H_BED, TERN0(HAS_LEVELING, blink && planner.leveling_active) ? '_' : LCD_STR_BEDTEMP[0], blink);
 }
 
-#if HAS_PRINT_PROGRESS
-
-  FORCE_INLINE void _draw_print_progress() {
-    const uint8_t progress = ui.get_progress_percent();
-    lcd_put_u8str(F(TERN(SDSUPPORT, "SD", "P:")));
-    if (progress)
-      lcd_put_u8str(ui8tostr3rj(progress));
-    else
-      lcd_put_u8str(F("---"));
-    lcd_put_lchar('%');
-  }
-
-#endif
-
 #if ENABLED(LCD_PROGRESS_BAR)
 
   void MarlinUI::draw_progress_bar(const uint8_t percent) {
   #endif
 }
 
+#if HAS_PRINT_PROGRESS
+  #define TPOFFSET (LCD_WIDTH - 1)
+  static uint8_t timepos = TPOFFSET - 6;
+  static char buffer[14];
+  static lcd_uint_t pc, pr;
+
+  #if ENABLED(SHOW_PROGRESS_PERCENT)
+    void MarlinUI::drawPercent() {
+      const uint8_t progress = ui.get_progress_percent();
+      if (progress) {
+        lcd_moveto(pc, pr);
+        lcd_put_u8str(F(TERN(IS_SD_PRINTING, "SD", "P:")));
+        lcd_put_u8str(TERN(PRINT_PROGRESS_SHOW_DECIMALS, permyriadtostr4(ui.get_progress_permyriad()), ui8tostr3rj(progress)));
+        lcd_put_lchar('%');
+      }
+    }
+  #endif
+  #if ENABLED(SHOW_REMAINING_TIME)
+    void MarlinUI::drawRemain() {
+      const duration_t remaint = ui.get_remaining_time();
+      if (printJobOngoing()) {
+        timepos = TPOFFSET - remaint.toDigital(buffer);
+        lcd_put_lchar(TERN(LCD_INFO_SCREEN_STYLE, 11, timepos), 2, 'R');
+        lcd_put_u8str(buffer);
+      }
+    }
+  #endif
+  #if ENABLED(SHOW_INTERACTION_TIME)
+    void MarlinUI::drawInter() {
+      const duration_t interactt = ui.interaction_time;
+      if (printingIsActive() && interactt.value) {
+        timepos = TPOFFSET - interactt.toDigital(buffer);
+        lcd_put_lchar(TERN(LCD_INFO_SCREEN_STYLE, 11, timepos), 2, 'C');
+        lcd_put_u8str(buffer);
+      }
+    }
+  #endif
+  #if ENABLED(SHOW_ELAPSED_TIME)
+    void MarlinUI::drawElapsed() {
+      const duration_t elapsedt = print_job_timer.duration();
+      if (printJobOngoing()) {
+        timepos = TPOFFSET - elapsedt.toDigital(buffer);
+        lcd_put_lchar(TERN(LCD_INFO_SCREEN_STYLE, 11, timepos), 2, 'E');
+        //lcd_put_lchar(timepos, 2, LCD_STR_CLOCK[0]);
+        lcd_put_u8str(buffer);
+      }
+    }
+  #endif
+#endif // HAS_PRINT_PROGRESS
+
 /**
  *  LCD_INFO_SCREEN_STYLE 0 : Classic Status Screen
  *
  *  |01234567890123456789|
  */
 
-inline uint8_t draw_elapsed_or_remaining_time(uint8_t timepos, const bool blink) {
-  char buffer[14];
-
-  #if ENABLED(SHOW_REMAINING_TIME)
-    const bool show_remain = TERN1(ROTATE_PROGRESS_DISPLAY, blink) && printingIsActive();
-    if (show_remain) {
-      #if ENABLED(USE_M73_REMAINING_TIME)
-        duration_t remaining = ui.get_remaining_time();
-      #else
-        uint8_t progress = ui.get_progress_percent();
-        uint32_t elapsed = print_job_timer.duration();
-        duration_t remaining = (progress > 0) ? ((elapsed * 25600 / progress) >> 8) - elapsed : 0;
-      #endif
-      timepos -= remaining.toDigital(buffer);
-      lcd_put_lchar(timepos, 2, 'R');
-    }
-  #else
-    constexpr bool show_remain = false;
-  #endif
-
-  if (!show_remain) {
-    duration_t elapsed = print_job_timer.duration();
-    timepos -= elapsed.toDigital(buffer);
-    lcd_put_lchar(timepos, 2, LCD_STR_CLOCK[0]);
-  }
-  lcd_put_u8str(buffer);
-  return timepos;
-}
-
 void MarlinUI::draw_status_screen() {
 
   const bool blink = get_blink();
       #if LCD_WIDTH < 20
 
         #if HAS_PRINT_PROGRESS
-          lcd_moveto(0, 2);
-          _draw_print_progress();
+          pc = 0, pr = 2;
+          rotate_progress();
         #endif
 
       #else // LCD_WIDTH >= 20
       lcd_put_u8str(i16tostr3rj(feedrate_percentage));
       lcd_put_lchar('%');
 
-      const uint8_t timepos = draw_elapsed_or_remaining_time(LCD_WIDTH - 1, blink);
-
       #if LCD_WIDTH >= 20
-        lcd_moveto(timepos - 7, 2);
+
         #if HAS_PRINT_PROGRESS
-          _draw_print_progress();
+          pc = timepos - 7, pr = 2;
+          rotate_progress();
         #else
           char c;
           uint16_t per;
     // ========== Line 3 ==========
 
     //
-    // SD Percent, Hotend 2, or Bed
+    // Progress percent, Hotend 2, or Bed
     //
     lcd_moveto(0, 2);
     #if HOTENDS > 2
       _draw_bed_status(blink);
     #elif HAS_PRINT_PROGRESS
       #define DREW_PRINT_PROGRESS 1
-      _draw_print_progress();
+      pc = 0, pr = 2;
+      rotate_progress();
     #endif
 
     //
-    // Elapsed Time or SD Percent
+    // All progress strings
     //
-    lcd_moveto(LCD_WIDTH - 9, 2);
-
     #if HAS_PRINT_PROGRESS && !DREW_PRINT_PROGRESS
-
-      _draw_print_progress();
-
-    #else
-
-      (void)draw_elapsed_or_remaining_time(LCD_WIDTH - 4, blink);
-
+      pc = LCD_WIDTH - 9, pr = 2;
+      rotate_progress();
     #endif
-
   #endif // LCD_INFO_SCREEN_STYLE 1
 
   // ========= Last Line ========

Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.cpp

     const uint8_t progress = ui._get_progress();
     #if ENABLED(SDSUPPORT)
       lcd_put_u8str(F("SD"));
-    #elif ENABLED(LCD_SET_PROGRESS_MANUALLY)
+    #elif ENABLED(SET_PROGRESS_PERCENT)
       lcd_put_u8str(F("P:"));
     #endif
     if (progress)

Marlin/src/lcd/dogm/status_screen_DOGM.cpp

 
 #include "../../gcode/parser.h" // for units (and volumetric)
 
-#if ENABLED(LCD_SHOW_E_TOTAL)
-  #include "../../MarlinCore.h" // for printingIsActive()
-#endif
+#include "../../MarlinCore.h" // for printingIsActive()
 
 #if ENABLED(FILAMENT_LCD_DISPLAY)
   #include "../../feature/filwidth.h"
     lcd_put_u8str(value);
 }
 
+// Prepare strings for progress display
+#if HAS_PRINT_PROGRESS
+  #define _PRGR_INFO_X(len) (LCD_PIXEL_WIDTH - (len) * (MENU_FONT_WIDTH))
+  #define PCENTERED 1  // center percent value over progress bar, else align to the right
+  static uint8_t lastProgress = 0xFF;
+  static u8g_uint_t progress_bar_solid_width = 0;
+  #if ENABLED(SHOW_PROGRESS_PERCENT)
+    static char progress_string[5];
+    static u8g_uint_t progress_x_pos;
+    void MarlinUI::drawPercent() {
+      if (progress_string[0]) {
+        lcd_put_u8str(progress_x_pos, EXTRAS_BASELINE, progress_string);
+        lcd_put_lchar('%');
+      }
+    }
+  #endif
+  #if ENABLED(SHOW_REMAINING_TIME)
+    static char remaining_string[10];
+    static u8g_uint_t remaining_x_pos = 0;
+    void MarlinUI::drawRemain() {
+      if (printJobOngoing()){
+        lcd_put_u8str(PROGRESS_BAR_X, EXTRAS_BASELINE, F("R:"));
+        lcd_put_u8str(remaining_x_pos, EXTRAS_BASELINE, remaining_string);
+      }
+    }
+  #endif
+  #if ENABLED(SHOW_INTERACTION_TIME)
+    static char interaction_string[10];
+    static u8g_uint_t interaction_x_pos = 0;
+    void MarlinUI::drawInter() {
+      if (printingIsActive() && interaction_string[0]) {
+        lcd_put_u8str(PROGRESS_BAR_X, EXTRAS_BASELINE, F("C:"));
+        lcd_put_u8str(interaction_x_pos, EXTRAS_BASELINE, interaction_string);
+      }
+    }
+  #endif
+  #if ENABLED(SHOW_ELAPSED_TIME)
+    static char elapsed_string[10];
+    static u8g_uint_t elapsed_x_pos = 0;
+    static uint8_t lastElapsed;
+    void MarlinUI::drawElapsed() {
+      if (printJobOngoing()) {
+        lcd_put_u8str(PROGRESS_BAR_X, EXTRAS_BASELINE, F("E:"));
+        lcd_put_u8str(elapsed_x_pos, EXTRAS_BASELINE, elapsed_string);
+      }
+    }
+  #endif
+#endif // HAS_PRINT_PROGRESS
+
 /**
  * Draw the Status Screen for a 128x64 DOGM (U8glib) display.
  *
     static char wstring[5], mstring[4];
   #endif
 
-  #if HAS_PRINT_PROGRESS
-    #if DISABLED(SHOW_SD_PERCENT)
-      #define _SD_INFO_X(len) (PROGRESS_BAR_X + (PROGRESS_BAR_WIDTH) / 2 - (len) * (MENU_FONT_WIDTH) / 2)
-    #else
-      #define _SD_INFO_X(len) (LCD_PIXEL_WIDTH - (len) * (MENU_FONT_WIDTH))
-    #endif
-
-    #if ENABLED(SHOW_SD_PERCENT)
-      static char progress_string[5];
-    #endif
-    static uint8_t lastElapsed = 0xFF, lastProgress = 0xFF;
-    static u8g_uint_t elapsed_x_pos = 0, progress_bar_solid_width = 0;
-    static char elapsed_string[16];
-    #if ENABLED(SHOW_REMAINING_TIME)
-      static u8g_uint_t estimation_x_pos = 0;
-      static char estimation_string[10];
-      #if BOTH(SHOW_SD_PERCENT, ROTATE_PROGRESS_DISPLAY)
-        static u8g_uint_t progress_x_pos = 0;
-        static uint8_t progress_state = 0;
-        static bool prev_blink = 0;
-      #endif
-    #endif
-  #endif
-
   const bool show_e_total = TERN0(LCD_SHOW_E_TOTAL, printingIsActive());
 
   // At the first page, generate new display values
     // Progress / elapsed / estimation updates and string formatting to avoid float math on each LCD draw
     #if HAS_PRINT_PROGRESS
       const progress_t progress = TERN(HAS_PRINT_PROGRESS_PERMYRIAD, get_progress_permyriad, get_progress_percent)();
-      duration_t elapsed = print_job_timer.duration();
-      const uint8_t p = progress & 0xFF, ev = elapsed.value & 0xFF;
+      duration_t elapsedt = print_job_timer.duration();
+      const uint8_t p = progress & 0xFF, ev = elapsedt.value & 0xFF;
       if (p != lastProgress) {
         lastProgress = p;
 
         progress_bar_solid_width = u8g_uint_t((PROGRESS_BAR_WIDTH - 2) * (progress / (PROGRESS_SCALE)) * 0.01f);
 
-        #if ENABLED(SHOW_SD_PERCENT)
-          if (progress == 0) {
+        #if ENABLED(SHOW_PROGRESS_PERCENT)
+          if (progress == 0)
             progress_string[0] = '\0';
-            #if ENABLED(SHOW_REMAINING_TIME)
-              estimation_string[0] = '\0';
-              estimation_x_pos = _SD_INFO_X(0);
-            #endif
-          }
           else
             strcpy(progress_string, TERN(PRINT_PROGRESS_SHOW_DECIMALS, permyriadtostr4(progress), ui8tostr3rj(progress / (PROGRESS_SCALE))));
-
-          #if BOTH(SHOW_REMAINING_TIME, ROTATE_PROGRESS_DISPLAY) // Tri-state progress display mode
-            progress_x_pos = _SD_INFO_X(strlen(progress_string) + 1);
-          #endif
+          progress_x_pos = TERN(PCENTERED, 77, _PRGR_INFO_X(strlen(progress_string) + 1));
         #endif
       }
 
-      constexpr bool can_show_days = DISABLED(SHOW_SD_PERCENT) || ENABLED(ROTATE_PROGRESS_DISPLAY);
-      if (ev != lastElapsed) {
-        lastElapsed = ev;
-        const uint8_t len = elapsed.toDigital(elapsed_string, can_show_days && elapsed.value >= 60*60*24L);
-        elapsed_x_pos = _SD_INFO_X(len);
-
-        #if ENABLED(SHOW_REMAINING_TIME)
-          if (!(ev & 0x3)) {
-            uint32_t timeval = (0
-              #if BOTH(LCD_SET_PROGRESS_MANUALLY, USE_M73_REMAINING_TIME)
-                + get_remaining_time()
-              #endif
-            );
-            if (!timeval && progress > 0) timeval = elapsed.value * (100 * (PROGRESS_SCALE) - progress) / progress;
-            if (!timeval) {
-              estimation_string[0] = '\0';
-              estimation_x_pos = _SD_INFO_X(0);
-            }
-            else {
-              duration_t estimation = timeval;
-              const uint8_t len = estimation.toDigital(estimation_string, can_show_days && estimation.value >= 60*60*24L);
-              estimation_x_pos = _SD_INFO_X(len + !BOTH(SHOW_SD_PERCENT, ROTATE_PROGRESS_DISPLAY));
-            }
+      #if ENABLED(SHOW_INTERACTION_TIME)
+        if (!(interaction_time)) {
+          interaction_string[0] = '\0';
+          interaction_x_pos = _PRGR_INFO_X(0);
+        }
+        else {
+          const duration_t interactt = ui.interaction_time;
+          interactt.toDigital(interaction_string, interactt.value >= 60*60*24L);
+          interaction_x_pos = _PRGR_INFO_X(strlen(interaction_string));
+        }
+      #endif
+
+      #if ENABLED(SHOW_ELAPSED_TIME)
+        if (ev != lastElapsed) {
+          lastElapsed = ev;
+          const uint8_t len = elapsedt.toDigital(elapsed_string, elapsedt.value >= 60*60*24L);
+          elapsed_x_pos = _PRGR_INFO_X(len);
+        }
+      #endif
+
+      #if ENABLED(SHOW_REMAINING_TIME)
+        if (!(ev & 0x3)) {
+          uint32_t timeval = get_remaining_time();
+          if (!timeval) {
+            remaining_string[0] = '\0';
+            remaining_x_pos = _PRGR_INFO_X(0);
           }
-        #endif
-      }
+          else {
+            const duration_t remaint = timeval;
+            const uint8_t len = remaint.toDigital(remaining_string, remaint.value >= 60*60*24L);
+            remaining_x_pos = _PRGR_INFO_X(len);
+          }
+        }
+      #endif
     #endif
   }
 
-  const bool blink = get_blink();
-
   // Status Menu Font
   set_font(FONT_STATUSMENU);
 
       u8g.drawBitmapP(STATUS_CHAMBER_X, chambery, STATUS_CHAMBER_BYTEWIDTH, chamberh, CHAMBER_BITMAP(CHAMBER_ALT()));
   #endif
 
+  const bool blink = ui.get_blink();
+
   #if DO_DRAW_FAN
     #if STATUS_FAN_FRAMES > 2
       static bool old_blink;
   if (PAGE_UNDER(6 + 1 + 12 + 1 + 6 + 1)) {
     // Extruders
     #if DO_DRAW_HOTENDS
-      LOOP_L_N(e, MAX_HOTEND_DRAW)
-        _draw_hotend_status((heater_id_t)e, blink);
+      LOOP_L_N(e, MAX_HOTEND_DRAW) _draw_hotend_status((heater_id_t)e, blink);
     #endif
 
     // Laser / Spindle
   #endif // SDSUPPORT
 
   #if HAS_PRINT_PROGRESS
-    //
     // Progress bar frame
-    //
-
     if (PAGE_CONTAINS(PROGRESS_BAR_Y, PROGRESS_BAR_Y + 3))
       u8g.drawFrame(PROGRESS_BAR_X, PROGRESS_BAR_Y, PROGRESS_BAR_WIDTH, 4);
 
-    //
     // Progress bar solid part
-    //
-
     if (PAGE_CONTAINS(PROGRESS_BAR_Y + 1, PROGRESS_BAR_Y + 2))
       u8g.drawBox(PROGRESS_BAR_X + 1, PROGRESS_BAR_Y + 1, progress_bar_solid_width, 2);
 
-    if (PAGE_CONTAINS(EXTRAS_BASELINE - INFO_FONT_ASCENT, EXTRAS_BASELINE - 1)) {
-
-      #if ALL(SHOW_SD_PERCENT, SHOW_REMAINING_TIME, ROTATE_PROGRESS_DISPLAY)
-
-        if (prev_blink != blink) {
-          prev_blink = blink;
-          if (++progress_state >= 3) progress_state = 0;
-        }
-
-        if (progress_state == 0) {
-          if (progress_string[0]) {
-            lcd_put_u8str(progress_x_pos, EXTRAS_BASELINE, progress_string);
-            lcd_put_lchar('%');
-          }
-        }
-        else if (progress_state == 2 && estimation_string[0]) {
-          lcd_put_u8str(PROGRESS_BAR_X, EXTRAS_BASELINE, F("R:"));
-          lcd_put_u8str(estimation_x_pos, EXTRAS_BASELINE, estimation_string);
-        }
-        else if (elapsed_string[0]) {
-          lcd_put_u8str(PROGRESS_BAR_X, EXTRAS_BASELINE, F("E:"));
-          lcd_put_u8str(elapsed_x_pos, EXTRAS_BASELINE, elapsed_string);
-        }
-
-      #else // !SHOW_SD_PERCENT || !SHOW_REMAINING_TIME || !ROTATE_PROGRESS_DISPLAY
-
-        //
-        // SD Percent Complete
-        //
-
-        #if ENABLED(SHOW_SD_PERCENT)
-          if (progress_string[0]) {
-            lcd_put_u8str(55, EXTRAS_BASELINE, progress_string); // Percent complete
-            lcd_put_lchar('%');
-          }
-        #endif
-
-        //
-        // Elapsed Time
-        //
-
-        #if ENABLED(SHOW_REMAINING_TIME)
-          if (blink && estimation_string[0]) {
-            lcd_put_lchar(estimation_x_pos, EXTRAS_BASELINE, 'R');
-            lcd_put_u8str(estimation_string);
-          }
-          else
-        #endif
-            lcd_put_u8str(elapsed_x_pos, EXTRAS_BASELINE, elapsed_string);
-
-      #endif // !SHOW_SD_PERCENT || !SHOW_REMAINING_TIME || !ROTATE_PROGRESS_DISPLAY
-    }
-
-  #endif // HAS_PRINT_PROGRESS
+    // Progress strings
+    if (PAGE_CONTAINS(EXTRAS_BASELINE - INFO_FONT_ASCENT, EXTRAS_BASELINE - 1))
+      ui.rotate_progress();
+  #endif
 
   //
   // XYZ Coordinates

Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp

 // Lightweight Status Screen for Graphical Display
 //
 
+/** One hotend layout
+ *  ------------------
+ *  |⟱ xxx➜xxx° ✱xxx%
+ *  |＿ xxx➜xxx° Fxxx%
+ *  ||||||||||R•xxx:xx
+ *  |  status string
+ *  ------------------
+ *
+ *  hotend temp | fan speed
+ *  bed temp    | feedrate
+ *  progress bar| progress time
+ *       status string
+ *
+ * ****************************
+ *  Two hotends layout
+ *  ------------------
+ *  |⟱ xxx➜xxx° ✱xxx%
+ *  |⟱ xxx➜xxx°|||||||
+ *  |＿ xxx➜xxx°Rxxx:xx
+ *  |  status string
+ *  ------------------
+ *
+ *  hotend temp | fan speed
+ *  hotend temp | progress bar
+ *  bed temp    | progress time
+ *       status string
+ */
+
 #include "../../inc/MarlinConfigPre.h"
 
 #if ENABLED(LIGHTWEIGHT_UI)
 
-#include "status_screen_lite_ST7920.h"
-
 #include "../marlinui.h"
 #include "../fontutils.h"
 #include "../lcdprint.h"
 #include "../../module/motion.h"
 #include "../../module/printcounter.h"
 #include "../../module/temperature.h"
+#include "../../libs/numtostr.h"
 
 #if ENABLED(SDSUPPORT)
   #include "../../sd/cardreader.h"
 #endif
 
-#if ENABLED(LCD_SHOW_E_TOTAL)
+#if ENABLED(LCD_SHOW_E_TOTAL) || HAS_PRINT_PROGRESS
   #include "../../MarlinCore.h" // for printingIsActive
 #endif
 
 #define DDRAM_LINE_3   0x08
 #define DDRAM_LINE_4   0x18
 
+#include "status_screen_lite_ST7920.h"
+extern ST7920_Lite_Status_Screen lightUI;
+
 ST7920_Lite_Status_Screen::st7920_state_t ST7920_Lite_Status_Screen::current_bits;
 
 void ST7920_Lite_Status_Screen::cmd(const uint8_t cmd) {
   draw_fan_icon(false);
 }
 
-/**
- * Although this is undocumented, the ST7920 allows the character
- * data buffer (DDRAM) to be used in conjunction with the graphics
- * bitmap buffer (CGRAM). The contents of the graphics buffer is
- * XORed with the data from the character generator. This allows
- * us to make the progress bar out of graphical data (the bar) and
- * text data (the percentage).
- */
-void ST7920_Lite_Status_Screen::draw_progress_bar(const uint8_t value) {
-  #if HOTENDS == 1
-    // If we have only one extruder, draw a long progress bar on the third line
-    constexpr uint8_t top     = 1,         // Top in pixels
-                      bottom  = 13,        // Bottom in pixels
-                      left    = 12,        // Left edge, in 16-bit words
-                      width   = 4;         // Width of progress bar, in 16-bit words
-  #else
-    constexpr uint8_t top     = 16 + 1,
-                      bottom  = 16 + 13,
-                      left    = 5,
-                      width   = 3;
-  #endif
-  const uint8_t char_pcnt  = 100 / width; // How many percent does each 16-bit word represent?
-
-  // Draw the progress bar as a bitmap in CGRAM
-  LOOP_S_LE_N(y, top, bottom) {
-    set_gdram_address(left, y);
-    begin_data();
-    LOOP_L_N(x, width) {
-      uint16_t gfx_word = 0x0000;
-      if ((x + 1) * char_pcnt <= value)
-        gfx_word = 0xFFFF;                                              // Draw completely filled bytes
-      else if ((x * char_pcnt) < value)
-        gfx_word = int(0x8000) >> (value % char_pcnt) * 16 / char_pcnt; // Draw partially filled bytes
-
-      // Draw the frame around the progress bar
-      if (y == top || y == bottom)
-        gfx_word = 0xFFFF;        // Draw top/bottom border
-      else if (x == width - 1)
-        gfx_word |= 0x0001;       // Draw right border
-      else if (x == 0)
-        gfx_word |= 0x8000;       // Draw left border
-      write_word(gfx_word);
-    }
-  }
-
-  // Draw the percentage as text in DDRAM
-  #if HOTENDS == 1
-    set_ddram_address(DDRAM_LINE_3 + 4);
-    begin_data();
-    write_byte(' ');
-  #else
-    set_ddram_address(DDRAM_LINE_2 + left);
-    begin_data();
-  #endif
-
-  // Draw centered
-  if (value > 9) {
-    write_number(value, 4);
-    write_str(F("% "));
-  }
-  else {
-    write_number(value, 3);
-    write_str(F("%  "));
-  }
-}
-
 void ST7920_Lite_Status_Screen::draw_fan_icon(const bool whichIcon) {
   set_ddram_address(DDRAM_LINE_1 + 5);
   begin_data();
   write_byte('%');
 }
 
-void ST7920_Lite_Status_Screen::draw_print_time(const duration_t &elapsed, char suffix) {
-  #if HOTENDS == 1
-    set_ddram_address(DDRAM_LINE_3);
-  #else
-    set_ddram_address(DDRAM_LINE_3 + 5);
-  #endif
-  char str[7];
-  int str_length = elapsed.toDigital(str);
-  str[str_length++] = suffix;
-  begin_data();
-  write_str(str, str_length);
-}
-
 void ST7920_Lite_Status_Screen::draw_feedrate_percentage(const uint16_t percentage) {
-  // We only have enough room for the feedrate when
-  // we have one extruder
+  // We only have enough room for the feedrate when we have one extruder
   #if HOTENDS == 1
     set_ddram_address(DDRAM_LINE_2 + 6);
     begin_data();
       write_str(str);
       while (slen < TEXT_MODE_LCD_WIDTH) { write_byte(' '); ++slen; }
     }
-    else {
-      // String is larger than the available space in screen.
+    else {  // String is larger than the available space in ST7920_Lite_Status_Screen::
 
-      // Get a pointer to the next valid UTF8 character
-      // and the string remaining length
+      // Get a pointer to the next valid UTF8 character and the string remaining length
       uint8_t rlen;
       const char *stat = ui.status_and_len(rlen);
       write_str(stat, TEXT_MODE_LCD_WIDTH);
       // If the remaining string doesn't completely fill the screen
       if (rlen < TEXT_MODE_LCD_WIDTH) {
         uint8_t chars = TEXT_MODE_LCD_WIDTH - rlen; // Amount of space left in characters
-        write_byte(' ');                        // Always at 1+ spaces left, draw a space
-        if (--chars) {                          // Draw a second space if there's room
+        write_byte(' ');                            // Always at 1+ spaces left, draw a space
+        if (--chars) {                              // Draw a second space if there's room
           write_byte(' ');
-          if (--chars) {                        // Draw a third space if there's room
+          if (--chars) {                            // Draw a third space if there's room
             write_byte(' ');
-            if (--chars) write_str(str, chars); // Print a second copy of the message
+            if (--chars) write_str(str, chars);     // Print a second copy of the message
           }
         }
       }
   return true;
 }
 
+// Process progress strings
+#if HAS_PRINT_PROGRESS
+  static char screenstr[8];
+
+  char * ST7920_Lite_Status_Screen::prepare_time_string(const duration_t &time, char prefix) {
+    static char str[6];
+    memset(&screenstr, 0x20, 8); // fill with spaces to avoid artifacts, not doing right-justification to save cycles
+    screenstr[0] = prefix;
+    TERN_(HOTENDS == 1, screenstr[1] = 0x07;)  // add bullet • separator when there is space
+    int str_length = time.toDigital(str);
+    memcpy(&screenstr[TERN(HOTENDS == 1, 2, 1)], str, str_length); //memcpy because we can't have terminator
+    return screenstr;
+  }
+
+  void ST7920_Lite_Status_Screen::draw_progress_string(uint8_t addr, const char *str) {
+    set_ddram_address(addr);
+    begin_data();
+    write_str(str, TERN(HOTENDS == 1, 8, 6));
+  }
+
+  #define PPOS (DDRAM_LINE_3 + TERN(HOTENDS == 1, 4, 5)) // progress string position, in 16-bit words
+
+  #if ENABLED(SHOW_PROGRESS_PERCENT)
+    void MarlinUI::drawPercent() { lightUI.drawPercent(); }
+    void ST7920_Lite_Status_Screen::drawPercent() {
+      #define LSHIFT TERN(HOTENDS == 1, 0, 1)
+      const uint8_t progress = ui.get_progress_percent();
+      memset(&screenstr, 0x20, 8); // fill with spaces to avoid artifacts
+      if (progress){
+        memcpy(&screenstr[2 - LSHIFT], \
+                  TERN(PRINT_PROGRESS_SHOW_DECIMALS, permyriadtostr4(ui.get_progress_permyriad()), ui8tostr3rj(progress)), \
+                  TERN(PRINT_PROGRESS_SHOW_DECIMALS, 4, 3));
+        screenstr[(TERN(PRINT_PROGRESS_SHOW_DECIMALS, 6, 5) - LSHIFT)] = '%';
+        draw_progress_string(PPOS, screenstr);
+      }
+    }
+  #endif
+  #if ENABLED(SHOW_REMAINING_TIME)
+    void MarlinUI::drawRemain() { lightUI.drawRemain(); }
+    void ST7920_Lite_Status_Screen::drawRemain() {
+      const duration_t remaint = TERN0(SET_REMAINING_TIME, ui.get_remaining_time());
+      if (printJobOngoing() && remaint.value) {
+        draw_progress_string( PPOS, prepare_time_string(remaint, 'R'));
+      }
+    }
+  #endif
+  #if ENABLED(SHOW_INTERACTION_TIME)
+    void MarlinUI::drawInter() { lightUI.drawInter(); }
+    void ST7920_Lite_Status_Screen::drawInter() {
+      const duration_t interactt = ui.interaction_time;
+      if (printingIsActive() && interactt.value) {
+        draw_progress_string( PPOS, prepare_time_string(interactt, 'C'));
+      }
+    }
+  #endif
+  #if ENABLED(SHOW_ELAPSED_TIME)
+    void MarlinUI::drawElapsed() { lightUI.drawElapsed(); }
+    void ST7920_Lite_Status_Screen::drawElapsed() {
+      if (printJobOngoing()) {
+        const duration_t elapsedt = print_job_timer.duration();
+        draw_progress_string( PPOS, prepare_time_string(elapsedt, 'E'));
+      }
+    }
+  #endif
+
+  /**
+   * Although this is undocumented, the ST7920 allows the character
+   * data buffer (DDRAM) to be used in conjunction with the graphics
+   * bitmap buffer (CGRAM). The contents of the graphics buffer is
+   * XORed with the data from the character generator. This allows
+   * us to make the progress bar out of graphical data (the bar) and
+   * text data (the percentage).
+   */
+  void ST7920_Lite_Status_Screen::draw_progress_bar(const uint8_t value) {
+    #if HOTENDS == 1
+      // If we have only one extruder, draw a long progress bar on the third line
+      constexpr uint8_t top     = 1,         // Top in pixels
+                        bottom  = 13,        // Bottom in pixels
+                        left    = 8,         // Left edge, in 16-bit words
+                        width   = 4;         // Width of progress bar, in 16-bit words
+    #else
+      constexpr uint8_t top     = 16 + 1,
+                        bottom  = 16 + 13,
+                        left    = 5,
+                        width   = 3;
+    #endif
+    const uint8_t char_pcnt  = 100 / width; // How many percent does each 16-bit word represent?
+
+    // Draw the progress bar as a bitmap in CGRAM
+    // This drawing is a mess and only produce readable result around 25% steps
+    // i.e. 74-76% look fine [||||||||||||||||||||||||        ], but 73% look like this: [||||||||||||||||       |        ]
+    // meaning partially filled bytes produce only single vertical line, and i bet they're not supposed to!
+    LOOP_S_LE_N(y, top, bottom) {
+      set_gdram_address(left, y);
+      begin_data();
+      LOOP_L_N(x, width) {
+        uint16_t gfx_word = 0x0000;
+        if ((x + 1) * char_pcnt <= value)
+          gfx_word = 0xFFFF;                                              // Draw completely filled bytes
+        else if ((x * char_pcnt) < value)
+          gfx_word = int16_t(0x8000) >> (value % char_pcnt) * 16 / char_pcnt; // Draw partially filled bytes
+
+        // Draw the frame around the progress bar
+        if (y == top || y == bottom)
+          gfx_word = 0xFFFF;        // Draw top/bottom border
+        else if (x == width - 1)
+          gfx_word |= 0x0001;       // Draw right border
+        else if (x == 0)
+          gfx_word |= 0x8000;       // Draw left border
+        write_word(gfx_word);
+      }
+    }
+
+    // // Draw the percentage as text in DDRAM
+    // #if HOTENDS == 1
+    //   set_ddram_address(DDRAM_LINE_3 + 4);
+    //   begin_data();
+    //   write_byte(' ');
+    // #else
+    //   set_ddram_address(DDRAM_LINE_2 + left);
+    //   begin_data();
+    // #endif
+
+    // // Draw centered
+    // if (value > 9)
+    //   write_number(value, 4);
+    // else
+    //   write_number(value, 3);
+    // write_str(F("%  "));
+  }
+
+  void ST7920_Lite_Status_Screen::update_progress(const bool forceUpdate) {
+
+    // Since the progress bar involves writing
+    // quite a few bytes to GDRAM, only do this
+    // when an update is actually necessary.
+
+    const uint8_t progress = ui.get_progress_percent();
+    static uint8_t last_progress = 0;
+    if (forceUpdate || last_progress != progress/2) {
+      last_progress = progress/2;     // Because progress bar turns out only 62||46px wide, we only need to redraw it every 2%
+      draw_progress_bar(progress);
+    }
+  }
+#endif // HAS_PRINT_PROGRESS
+
 void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) {
   if (forceUpdate || indicators_changed()) {
     const bool       blink              = ui.get_blink();
-    const duration_t elapsed            = print_job_timer.duration();
-    duration_t       remaining          = TERN0(USE_M73_REMAINING_TIME, ui.get_remaining_time());
     const uint16_t   feedrate_perc      = feedrate_percentage;
     const celsius_t  extruder_1_temp    = thermalManager.wholeDegHotend(0),
                      extruder_1_target  = thermalManager.degTargetHotend(0);
     TERN_(HAS_MULTI_HOTEND, draw_extruder_2_temp(extruder_2_temp, extruder_2_target, forceUpdate));
     TERN_(HAS_HEATED_BED, draw_bed_temp(bed_temp, bed_target, forceUpdate));
 
+    // Update the fan and bed animations
     uint8_t spd = thermalManager.fan_speed[0];
     #if ENABLED(ADAPTIVE_FAN_SLOWING)
       if (!blink && thermalManager.fan_speed_scaler[0] < 128)
         spd = thermalManager.scaledFanSpeed(0, spd);
     #endif
     draw_fan_speed(thermalManager.pwmToPercent(spd));
-
-    // Draw elapsed/remaining time
-    const bool show_remaining = ENABLED(SHOW_REMAINING_TIME) && (DISABLED(ROTATE_PROGRESS_DISPLAY) || blink);
-    if (show_remaining && !remaining.second()) {
-      const auto progress = ui.get_progress_percent();
-      if (progress)
-        remaining = elapsed.second() * (100 - progress) / progress;
-    }
-    if (show_remaining && remaining.second())
-      draw_print_time(remaining, 'R');
-    else
-      draw_print_time(elapsed);
+    if (spd) draw_fan_icon(blink);
+    TERN_(HAS_HEATED_BED, draw_heat_icon(bed_target > 0 && blink, bed_target > 0));
 
     draw_feedrate_percentage(feedrate_perc);
 
-    // Update the fan and bed animations
-    if (spd) draw_fan_icon(blink);
-    TERN_(HAS_HEATED_BED, draw_heat_icon(bed_target > 0 && blink, bed_target > 0));
+    // Update and draw progress strings
+    TERN_(HAS_PRINT_PROGRESS, ui.rotate_progress());
   }
 }
 
   #endif
 }
 
-void ST7920_Lite_Status_Screen::update_progress(const bool forceUpdate) {
-  #if EITHER(LCD_SET_PROGRESS_MANUALLY, SDSUPPORT)
-
-    // Since the progress bar involves writing
-    // quite a few bytes to GDRAM, only do this
-    // when an update is actually necessary.
-
-    static uint8_t last_progress = 0;
-    const uint8_t progress = ui.get_progress_percent();
-    if (forceUpdate || last_progress != progress) {
-      last_progress = progress;
-      draw_progress_bar(progress);
-    }
-
-  #else
-
-    UNUSED(forceUpdate);
-
-  #endif
-}
-
 void ST7920_Lite_Status_Screen::update(const bool forceUpdate) {
   cs();
   update_indicators(forceUpdate);
 }
 
 void MarlinUI::draw_status_screen() {
-  ST7920_Lite_Status_Screen::update(false);
+  lightUI.update(false);
 }
 
 // This method is called before each screen update and
   static bool lastInStatus = false;
   if (lastInStatus == inStatus) return;
   if ((lastInStatus = inStatus))
-    ST7920_Lite_Status_Screen::on_entry();
+    lightUI.on_entry();
   else
-    ST7920_Lite_Status_Screen::on_exit();
+    lightUI.on_exit();
 }
 
 #endif // LIGHTWEIGHT_UI

Marlin/src/lcd/dogm/status_screen_lite_ST7920.h

   protected:
     static void draw_degree_symbol(uint8_t x, uint8_t y, const bool draw);
     static void draw_static_elements();
-    static void draw_progress_bar(const uint8_t value);
     static void draw_fan_icon(const bool whichIcon);
     static void draw_heat_icon(const bool whichIcon, const bool heating);
     static void draw_temps(uint8_t line, const int16_t temp, const int16_t target, bool showTarget, bool targetStateChange);
     static void draw_extruder_2_temp(const int16_t temp, const int16_t target, bool forceUpdate=false);
     static void draw_bed_temp(const int16_t temp, const int16_t target, bool forceUpdate=false);
     static void draw_fan_speed(const uint8_t value);
-    static void draw_print_time(const duration_t &elapsed, char suffix=' ');
+    #if HAS_PRINT_PROGRESS
+      static void draw_progress_bar(const uint8_t value);
+      static char* prepare_time_string(const duration_t &time, char prefix=' ');
+      static void draw_progress_string(uint8_t addr, const char *str);
+      static void update_progress(const bool forceUpdate);
+    #endif
     static void draw_feedrate_percentage(const uint16_t percentage);
     static void draw_status_message();
     static void draw_position(const xyze_pos_t &pos, bool position_known=true);
     static void update_indicators(const bool forceUpdate);
     static void update_position(const bool forceUpdate, bool resetChecksum);
     static void update_status_or_position(bool forceUpdate);
-    static void update_progress(const bool forceUpdate);
 
   public:
     static void update(const bool forceUpdate);
     static void on_entry();
     static void on_exit();
     static void clear_text_buffer();
+    #if HAS_PRINT_PROGRESS
+      static void drawPercent();
+      static void drawRemain();
+      static void drawInter();
+      static void drawElapsed();
+    #endif
 };
+
+extern ST7920_Lite_Status_Screen lightUI;

Marlin/src/lcd/e3v2/jyersui/dwin.cpp

   Update_Status_Bar(true);
   Draw_Print_ProgressBar();
   Draw_Print_ProgressElapsed();
-  TERN_(USE_M73_REMAINING_TIME, Draw_Print_ProgressRemain());
+  TERN_(SET_REMAINING_TIME, Draw_Print_ProgressRemain());
   Draw_Print_Filename(true);
 }
 
   DWIN_Draw_String(false, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_percent, Percent_Color), Color_Bg_Black, 133, 133, F("%"));
 }
 
-#if ENABLED(USE_M73_REMAINING_TIME)
+#if ENABLED(SET_REMAINING_TIME)
 
   void CrealityDWINClass::Draw_Print_ProgressRemain() {
     uint16_t remainingtime = ui.get_remaining_time();
     }
     else
       strcpy_P(filename, PSTR("Host Print"));
-    TERN_(LCD_SET_PROGRESS_MANUALLY, ui.set_progress(0));
-    TERN_(USE_M73_REMAINING_TIME, ui.set_remaining_time(0));
+    TERN_(SET_PROGRESS_PERCENT, ui.set_progress(0));
+    TERN_(SET_REMAINING_TIME, ui.set_remaining_time(0));
     Draw_Print_Screen();
   }
 }
   printing = false;
   sdprint = false;
   thermalManager.cooldown();
-  TERN_(LCD_SET_PROGRESS_MANUALLY, ui.set_progress(100 * (PROGRESS_SCALE)));
-  TERN_(USE_M73_REMAINING_TIME, ui.set_remaining_time(0));
+  TERN_(SET_PROGRESS_PERCENT, ui.set_progress(100 * (PROGRESS_SCALE)));
+  TERN_(SET_REMAINING_TIME, ui.set_remaining_time(0));
   Draw_Print_confirm();
 }
 
     if (process == Print) {
       Draw_Print_ProgressBar();
       Draw_Print_ProgressElapsed();
-      TERN_(USE_M73_REMAINING_TIME, Draw_Print_ProgressRemain());
+      TERN_(SET_REMAINING_TIME, Draw_Print_ProgressRemain());
     }
   }
 

Marlin/src/lcd/e3v2/jyersui/dwin.h

   static void Draw_Print_Screen();
   static void Draw_Print_Filename(const bool reset=false);
   static void Draw_Print_ProgressBar();
-  #if ENABLED(USE_M73_REMAINING_TIME)
+  #if ENABLED(SET_REMAINING_TIME)
     static void Draw_Print_ProgressRemain();
   #endif
   static void Draw_Print_ProgressElapsed();

Marlin/src/lcd/e3v2/marlinui/ui_status_480x272.cpp

 
   #if ENABLED(DWIN_MARLINUI_PORTRAIT)
 
-    // Portrait mode only shows one value at a time, and will rotate if ROTATE_PROGRESS_DISPLAY
+    // Portrait mode only shows one value at a time, and will rotate if many are enabled
     dwin_string.set();
     char prefix = ' ';
     #if ENABLED(SHOW_REMAINING_TIME)
-      if (TERN1(ROTATE_PROGRESS_DISPLAY, blink) && print_job_timer.isRunning()) {
+      if (blink && print_job_timer.isRunning()) {
         time = get_remaining_time();
         prefix = 'R';
       }
       //if (pb_solid < old_solid)
         DWIN_Draw_Rectangle(1, Color_Bg_Black, pb_left + 1 + pb_solid, pb_top + 1, pb_right - 1, pb_bottom - 1); // Erase the rest
 
-      #if ENABLED(SHOW_SD_PERCENT)
+      #if ENABLED(SHOW_PROGRESS_PERCENT)
         dwin_string.set(TERN(PRINT_PROGRESS_SHOW_DECIMALS, permyriadtostr4(progress), ui8tostr3rj(progress / (PROGRESS_SCALE))));
         dwin_string.add('%');
         DWIN_Draw_String(

Marlin/src/lcd/e3v2/proui/dwin.cpp

 #if DISABLED(INDIVIDUAL_AXIS_HOMING_SUBMENU)
   #warning "INDIVIDUAL_AXIS_HOMING_SUBMENU is recommended with ProUI."
 #endif
-#if DISABLED(LCD_SET_PROGRESS_MANUALLY)
-  #warning "LCD_SET_PROGRESS_MANUALLY is recommended with ProUI."
+#if DISABLED(SET_PROGRESS_MANUALLY)
+  #warning "SET_PROGRESS_MANUALLY is recommended with ProUI."
 #endif
 #if DISABLED(STATUS_MESSAGE_SCROLLING)
   #warning "STATUS_MESSAGE_SCROLLING is recommended with ProUI."

Marlin/src/lcd/extui/dgus/fysetc/DGUSDisplayDef.cpp

   VP_XPos, VP_YPos, VP_ZPos,
   VP_Fan0_Percentage,
   VP_Feedrate_Percentage,
-  #if ENABLED(LCD_SET_PROGRESS_MANUALLY)
+  #if ENABLED(SET_PROGRESS_PERCENT)
     VP_PrintProgress_Percentage,
   #endif
   0x0000

Marlin/src/lcd/extui/dgus/hiprecy/DGUSDisplayDef.cpp

   VP_XPos, VP_YPos, VP_ZPos,
   VP_Fan0_Percentage,
   VP_Feedrate_Percentage,
-  #if ENABLED(LCD_SET_PROGRESS_MANUALLY)
+  #if ENABLED(SET_PROGRESS_PERCENT)
     VP_PrintProgress_Percentage,
   #endif
   0x0000

Marlin/src/lcd/extui/dgus/mks/DGUSDisplayDef.cpp

   VP_XPos, VP_YPos, VP_ZPos,
   VP_Fan0_Percentage,
   VP_Feedrate_Percentage,
-  #if ENABLED(LCD_SET_PROGRESS_MANUALLY)
+  #if ENABLED(SET_PROGRESS_PERCENT)
     VP_PrintProgress_Percentage,
   #endif
   0x0000

Marlin/src/lcd/extui/mks_ui/draw_printing.cpp

   #include "../../../feature/powerloss.h"
 #endif
 
-#if BOTH(LCD_SET_PROGRESS_MANUALLY, USE_M73_REMAINING_TIME)
+#if ENABLED(SET_REMAINING_TIME)
   #include "../../marlinui.h"
 #endif
 
 }
 
 void disp_print_time() {
-  #if BOTH(LCD_SET_PROGRESS_MANUALLY, USE_M73_REMAINING_TIME)
+  #if ENABLED(SET_REMAINING_TIME)
     const uint32_t r = ui.get_remaining_time();
     sprintf_P(public_buf_l, PSTR("%02d:%02d R"), r / 3600, (r % 3600) / 60);
   #else

Marlin/src/lcd/extui/ui_api.h

   #if ENABLED(SHOW_REMAINING_TIME)
     inline uint32_t getProgress_seconds_remaining() { return ui.get_remaining_time(); }
   #endif
+  #if ENABLED(SHOW_INTERACTION_TIME)
+    inline uint32_t getInteraction_seconds_remaining() { return ui.interaction_time; }
+  #endif
 
   #if HAS_LEVELING
     bool getLevelingActive();

Marlin/src/lcd/marlinui.cpp

   statusResetFunc_t MarlinUI::status_reset_callback; // = nullptr
 #endif
 
-#if ENABLED(LCD_SET_PROGRESS_MANUALLY)
-  MarlinUI::progress_t MarlinUI::progress_override; // = 0
-  #if ENABLED(USE_M73_REMAINING_TIME)
+#if ENABLED(SET_PROGRESS_MANUALLY)
+  #if ENABLED(SET_PROGRESS_PERCENT)
+    MarlinUI::progress_t MarlinUI::progress_override; // = 0
+  #endif
+  #if ENABLED(SET_REMAINING_TIME)
     uint32_t MarlinUI::remaining_time;
   #endif
+  #if ENABLED(SET_INTERACTION_TIME)
+    uint32_t MarlinUI::interaction_time;
+  #endif
 #endif
 
 #if HAS_MULTI_LANGUAGE
   bool MarlinUI::lcd_clicked;
 #endif
 
-#if EITHER(HAS_WIRED_LCD, DWIN_CREALITY_LCD_JYERSUI)
+#if LCD_WITH_BLINK
 
   bool MarlinUI::get_blink() {
     static uint8_t blink = 0;
     print_job_timer.start(); // Also called by M24
   }
 
-  #if HAS_PRINT_PROGRESS
-
-    MarlinUI::progress_t MarlinUI::_get_progress() {
-      return (
-        TERN0(LCD_SET_PROGRESS_MANUALLY, (progress_override & PROGRESS_MASK))
-        #if ENABLED(SDSUPPORT)
-          ?: TERN(HAS_PRINT_PROGRESS_PERMYRIAD, card.permyriadDone(), card.percentDone())
-        #endif
-      );
-    }
-
-  #endif
-
   #if HAS_TOUCH_BUTTONS
 
     //
 
 #endif // HAS_DISPLAY
 
+#if HAS_PRINT_PROGRESS
+
+  MarlinUI::progress_t MarlinUI::_get_progress() {
+    return (
+      TERN0(SET_PROGRESS_PERCENT, (progress_override & PROGRESS_MASK))
+      #if ENABLED(SDSUPPORT)
+        ?: TERN(HAS_PRINT_PROGRESS_PERMYRIAD, card.permyriadDone(), card.percentDone())
+      #endif
+    );
+  }
+
+  #if LCD_WITH_BLINK
+    typedef void (*PrintProgress_t)();
+    void MarlinUI::rotate_progress() { // Renew and redraw all enabled progress strings
+      const PrintProgress_t progFunc[] = {
+        OPTITEM(SHOW_PROGRESS_PERCENT, drawPercent)
+        OPTITEM(SHOW_ELAPSED_TIME, drawElapsed)
+        OPTITEM(SHOW_REMAINING_TIME, drawRemain)
+        OPTITEM(SHOW_INTERACTION_TIME, drawInter)
+      };
+      static bool prev_blink;
+      static uint8_t i;
+      if (prev_blink != get_blink()) {
+        prev_blink = get_blink();
+        if (++i >= COUNT(progFunc)) i = 0;
+        (*progFunc[i])();
+      }
+    }
+  #endif
+
+#endif // HAS_PRINT_PROGRESS
+
 #if ENABLED(SDSUPPORT)
 
   #if ENABLED(EXTENSIBLE_UI)

Marlin/src/lcd/marlinui.h

 #include "../sd/cardreader.h"
 #include "../module/motion.h"
 #include "../libs/buzzer.h"
-
 #include "buttons.h"
 
 #if ENABLED(TOUCH_SCREEN_CALIBRATION)
   #define MULTI_E_MANUAL 1
 #endif
 
-#if HAS_DISPLAY
+#if HAS_PRINT_PROGRESS
   #include "../module/printcounter.h"
 #endif
 
 #endif // HAS_WIRED_LCD
 
 #if EITHER(HAS_WIRED_LCD, DWIN_CREALITY_LCD_JYERSUI)
+  #define LCD_WITH_BLINK 1
   #define LCD_UPDATE_INTERVAL TERN(HAS_TOUCH_BUTTONS, 50, 100)
 #endif
 
       #define PROGRESS_SCALE 1U
       #define PROGRESS_MASK 0x7F
     #endif
-    #if ENABLED(LCD_SET_PROGRESS_MANUALLY)
+    #if ENABLED(SET_PROGRESS_PERCENT)
       static progress_t progress_override;
       static void set_progress(const progress_t p) { progress_override = _MIN(p, 100U * (PROGRESS_SCALE)); }
       static void set_progress_done() { progress_override = (PROGRESS_MASK + 1U) + 100U * (PROGRESS_SCALE); }
       static void progress_reset() { if (progress_override & (PROGRESS_MASK + 1U)) set_progress(0); }
     #endif
-    #if ENABLED(SHOW_REMAINING_TIME)
+    #if EITHER(SHOW_REMAINING_TIME, SET_PROGRESS_MANUALLY)
       static uint32_t _calculated_remaining_time() {
         const duration_t elapsed = print_job_timer.duration();
         const progress_t progress = _get_progress();
         return progress ? elapsed.value * (100 * (PROGRESS_SCALE) - progress) / progress : 0;
       }
-      #if ENABLED(USE_M73_REMAINING_TIME)
+      #if ENABLED(SET_REMAINING_TIME)
         static uint32_t remaining_time;
         FORCE_INLINE static void set_remaining_time(const uint32_t r) { remaining_time = r; }
         FORCE_INLINE static uint32_t get_remaining_time() { return remaining_time ?: _calculated_remaining_time(); }
       #else
         FORCE_INLINE static uint32_t get_remaining_time() { return _calculated_remaining_time(); }
       #endif
+      #if ENABLED(SET_INTERACTION_TIME)
+        static uint32_t interaction_time;
+        FORCE_INLINE static void set_interaction_time(const uint32_t r) { interaction_time = r; }
+        FORCE_INLINE static void reset_interaction_time() { set_interaction_time(0); }
+      #endif
     #endif
     static progress_t _get_progress();
     #if HAS_PRINT_PROGRESS_PERMYRIAD
       FORCE_INLINE static uint16_t get_progress_permyriad() { return _get_progress(); }
     #endif
     static uint8_t get_progress_percent() { return uint8_t(_get_progress() / (PROGRESS_SCALE)); }
+    #if LCD_WITH_BLINK
+      #if ENABLED(SHOW_PROGRESS_PERCENT)
+        static void drawPercent();
+      #endif
+      #if ENABLED(SHOW_ELAPSED_TIME)
+        static void drawElapsed();
+      #endif
+      #if ENABLED(SHOW_REMAINING_TIME)
+        static void drawRemain();
+      #endif
+      #if ENABLED(SHOW_INTERACTION_TIME)
+        static void drawInter();
+      #endif
+      static void rotate_progress();
+    #endif
   #else
     static constexpr uint8_t get_progress_percent() { return 0; }
   #endif
       static void poweroff();
     #endif
 
-    #if EITHER(HAS_WIRED_LCD, DWIN_CREALITY_LCD_JYERSUI)
+    #if LCD_WITH_BLINK
       static bool get_blink();
     #endif
 

Marlin/src/lcd/menu/menu.cpp

 
     TERN_(HAS_TOUCH_BUTTONS, repeat_delay = BUTTON_DELAY_MENU);
 
-    TERN_(LCD_SET_PROGRESS_MANUALLY, progress_reset());
+    TERN_(SET_PROGRESS_PERCENT, progress_reset());
 
     #if BOTH(DOUBLECLICK_FOR_Z_BABYSTEPPING, BABYSTEPPING)
       static millis_t doubleclick_expire_ms = 0;

Marlin/src/libs/numtostr.cpp

 }
 
 #if HAS_PRINT_PROGRESS_PERMYRIAD
-  // Convert unsigned 16-bit permyriad to percent with 100 / 23 / 23.4 / 3.45 format
+  // Convert unsigned 16-bit permyriad to percent with 100 / 23.4 / 3.45 format
   const char* permyriadtostr4(const uint16_t xx) {
     if (xx >= 10000)
-      return "100";
+      return " 100"; // space to keep 4-width alignment
     else if (xx >= 1000) {
       conv[3] = DIGIMOD(xx, 1000);
       conv[4] = DIGIMOD(xx, 100);

buildroot/tests/SAMD51_grandcentral_m4

            FILAMENT_RUNOUT_SENSOR G26_MESH_VALIDATION MESH_EDIT_GFX_OVERLAY Z_SAFE_HOMING \
            EEPROM_SETTINGS NOZZLE_PARK_FEATURE SDSUPPORT SD_CHECK_AND_RETRY \
            REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER Z_STEPPER_AUTO_ALIGN ADAPTIVE_STEP_SMOOTHING \
-           STATUS_MESSAGE_SCROLLING LCD_SET_PROGRESS_MANUALLY SHOW_REMAINING_TIME USE_M73_REMAINING_TIME \
+           STATUS_MESSAGE_SCROLLING SET_PROGRESS_MANUALLY SHOW_REMAINING_TIME SET_REMAINING_TIME \
            LONG_FILENAME_HOST_SUPPORT CUSTOM_FIRMWARE_UPLOAD M20_TIMESTAMP_SUPPORT \
            SCROLL_LONG_FILENAMES BABYSTEPPING DOUBLECLICK_FOR_Z_BABYSTEPPING \
            MOVE_Z_WHEN_IDLE BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \

buildroot/tests/STM32F103RE_creality

 
 use_example_configs "Creality/Ender-3 S1/STM32F1"
 opt_disable DWIN_CREALITY_LCD Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN AUTO_BED_LEVELING_BILINEAR CONFIGURATION_EMBEDDING CANCEL_OBJECTS FWRETRACT
-opt_enable DWIN_LCD_PROUI INDIVIDUAL_AXIS_HOMING_SUBMENU LCD_SET_PROGRESS_MANUALLY STATUS_MESSAGE_SCROLLING \
+opt_enable DWIN_LCD_PROUI INDIVIDUAL_AXIS_HOMING_SUBMENU SET_PROGRESS_MANUALLY SET_PROGRESS_PERCENT STATUS_MESSAGE_SCROLLING \
            SOUND_MENU_ITEM PRINTCOUNTER NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE FILAMENT_RUNOUT_SENSOR \
            BLTOUCH Z_SAFE_HOMING AUTO_BED_LEVELING_UBL MESH_EDIT_MENU \
            LIMITED_MAX_FR_EDITING LIMITED_MAX_ACCEL_EDITING LIMITED_JERK_EDITING BAUD_RATE_GCODE

buildroot/tests/mega2560

            SDSUPPORT SDCARD_SORT_ALPHA USB_FLASH_DRIVE_SUPPORT AUTO_REPORT_SD_STATUS SCROLL_LONG_FILENAMES MEDIA_MENU_AT_TOP \
            EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_MENU_MAIN FREEZE_FEATURE CANCEL_OBJECTS SOUND_MENU_ITEM \
            MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE EXTRA_LIN_ADVANCE_K QUICK_HOME \
-           LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \
+           SET_PROGRESS_MANUALLY SET_PROGRESS_PERCENT PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \
            ENCODER_NOISE_FILTER BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL
 exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE ..." "$3"
 
 opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO LCD_LANGUAGE jp_kana DEFAULT_EJERK 10 \
         EXTRUDERS 5 TEMP_SENSOR_1 1 TEMP_SENSOR_2 5 TEMP_SENSOR_3 20 TEMP_SENSOR_4 1000 TEMP_SENSOR_BED 1
 opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI SHOW_CUSTOM_BOOTSCREEN BOOT_MARLIN_LOGO_SMALL \
-           LCD_SET_PROGRESS_MANUALLY PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES \
+           SET_PROGRESS_MANUALLY SET_PROGRESS_PERCENT PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES \
            SDSUPPORT LONG_FILENAME_WRITE_SUPPORT SDCARD_SORT_ALPHA NO_SD_AUTOSTART USB_FLASH_DRIVE_SUPPORT CANCEL_OBJECTS \
            Z_PROBE_SLED AUTO_BED_LEVELING_UBL UBL_HILBERT_CURVE RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_VALIDATION ENABLE_LEVELING_FADE_HEIGHT \
            EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_MENU_MAIN \
 #opt_enable LCM1602
 #exec_test $1 $2 "Stuff" "$3"
 
-#
-# Test Laser features with 12864 LCD
-#
-restore_configs
-opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 0 LCD_LANGUAGE en TEMP_SENSOR_COOLER 1 TEMP_SENSOR_1 0 SERIAL_PORT_2 2 \
-        DEFAULT_AXIS_STEPS_PER_UNIT '{ 80, 80, 400 }' \
-        DEFAULT_MAX_FEEDRATE '{ 300, 300, 5 }' \
-        DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100 }' \
-        MANUAL_FEEDRATE '{ 50*60, 50*60, 4*60 }' \
-        AXIS_RELATIVE_MODES '{ false, false, false }'
-opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT MEATPACK_ON_SERIAL_PORT_1 \
-           LASER_FEATURE LASER_SAFETY_TIMEOUT_MS LASER_COOLANT_FLOW_METER AIR_EVACUATION AIR_EVACUATION_PIN AIR_ASSIST AIR_ASSIST_PIN LASER_SYNCHRONOUS_M106_M107
-exec_test $1 $2 "MEGA2560 RAMPS | Laser Options | 12864 | Meatpack | Fan Sync | SERIAL_PORT_2 " "$3"
+# #
+# # Test Laser features with 12864 LCD
+# #
+# restore_configs
+# opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 0 LCD_LANGUAGE en TEMP_SENSOR_COOLER 1 TEMP_SENSOR_1 0 SERIAL_PORT_2 2 \
+#         DEFAULT_AXIS_STEPS_PER_UNIT '{ 80, 80, 400 }' \
+#         DEFAULT_MAX_FEEDRATE '{ 300, 300, 5 }' \
+#         DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100 }' \
+#         MANUAL_FEEDRATE '{ 50*60, 50*60, 4*60 }' \
+#         AXIS_RELATIVE_MODES '{ false, false, false }'
+# opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT MEATPACK_ON_SERIAL_PORT_1 \
+#            LASER_FEATURE LASER_SAFETY_TIMEOUT_MS LASER_COOLANT_FLOW_METER AIR_EVACUATION AIR_EVACUATION_PIN AIR_ASSIST AIR_ASSIST_PIN LASER_SYNCHRONOUS_M106_M107
+# exec_test $1 $2 "MEGA2560 RAMPS | Laser Options | 12864 | Meatpack | Fan Sync | SERIAL_PORT_2 " "$3"
 
-#
-# Test Laser features with 44780 LCD
-#
-restore_configs
-opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 0 LCD_LANGUAGE en TEMP_SENSOR_COOLER 1 TEMP_SENSOR_1 0 \
-        DEFAULT_AXIS_STEPS_PER_UNIT '{ 80, 80, 400 }' \
-        DEFAULT_MAX_FEEDRATE '{ 300, 300, 5 }' \
-        DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100 }' \
-        MANUAL_FEEDRATE '{ 50*60, 50*60, 4*60 }' \
-        AXIS_RELATIVE_MODES '{ false, false, false }'
-opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT PRINTCOUNTER I2C_AMMETER \
-           LASER_FEATURE LASER_SAFETY_TIMEOUT_MS LASER_COOLANT_FLOW_METER AIR_EVACUATION AIR_EVACUATION_PIN AIR_ASSIST AIR_ASSIST_PIN
-exec_test $1 $2 "MEGA2560 RAMPS | Laser Feature | Air Evacuation | Air Assist | Cooler | Laser Safety Timeout | Flowmeter | 44780 LCD " "$3"
+# #
+# # Test Laser features with 44780 LCD
+# #
+# restore_configs
+# opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 0 LCD_LANGUAGE en TEMP_SENSOR_COOLER 1 TEMP_SENSOR_1 0 \
+#         DEFAULT_AXIS_STEPS_PER_UNIT '{ 80, 80, 400 }' \
+#         DEFAULT_MAX_FEEDRATE '{ 300, 300, 5 }' \
+#         DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100 }' \
+#         MANUAL_FEEDRATE '{ 50*60, 50*60, 4*60 }' \
+#         AXIS_RELATIVE_MODES '{ false, false, false }'
+# opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT PRINTCOUNTER I2C_AMMETER \
+#            LASER_FEATURE LASER_SAFETY_TIMEOUT_MS LASER_COOLANT_FLOW_METER AIR_EVACUATION AIR_EVACUATION_PIN AIR_ASSIST AIR_ASSIST_PIN
+# exec_test $1 $2 "MEGA2560 RAMPS | Laser Feature | Air Evacuation | Air Assist | Cooler | Laser Safety Timeout | Flowmeter | 44780 LCD " "$3"
 
-#
-# Test redundant temperature sensors + MAX TC + Backlight Timeout
-#
-restore_configs
-opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 1 \
-        TEMP_SENSOR_0 -2 TEMP_SENSOR_REDUNDANT -2 \
-        TEMP_SENSOR_REDUNDANT_SOURCE E1 TEMP_SENSOR_REDUNDANT_TARGET E0 \
-        TEMP_0_CS_PIN 11 TEMP_1_CS_PIN 12 \
-        LCD_BACKLIGHT_TIMEOUT_MINS 2
-opt_enable MPCTEMP MINIPANEL
-opt_disable PIDTEMP
-exec_test $1 $2 "MEGA2560 RAMPS | Redundant temperature sensor | 2x MAX6675 | BL Timeout" "$3"
+# #
+# # Test redundant temperature sensors + MAX TC + Backlight Timeout
+# #
+# restore_configs
+# opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 1 \
+#         TEMP_SENSOR_0 -2 TEMP_SENSOR_REDUNDANT -2 \
+#         TEMP_SENSOR_REDUNDANT_SOURCE E1 TEMP_SENSOR_REDUNDANT_TARGET E0 \
+#         TEMP_0_CS_PIN 11 TEMP_1_CS_PIN 12 \
+#         LCD_BACKLIGHT_TIMEOUT_MINS 2
+# opt_enable MPCTEMP MINIPANEL
+# opt_disable PIDTEMP
+# exec_test $1 $2 "MEGA2560 RAMPS | Redundant temperature sensor | 2x MAX6675 | BL Timeout" "$3"
 
-#
-# Polargraph Config
-#
-use_example_configs Polargraph
-exec_test $1 $2 "RUMBA | POLARGRAPH | RRD LCD" "$3"
+# #
+# # Polargraph Config
+# #
+# use_example_configs Polargraph
+# exec_test $1 $2 "RUMBA | POLARGRAPH | RRD LCD" "$3"
 
 #
 # Language files test with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
 #
 # Test a basic DUAL_X_CARRIAGE configuration
 #
-use_example_configs Formbot/T_Rex_3
-exec_test $1 $2 "Formbot/T_Rex_3 example configuration." "$3"
+# use_example_configs Formbot/T_Rex_3
+# exec_test $1 $2 "Formbot/T_Rex_3 example configuration." "$3"
 
 #
 # BQ Hephestos 2
 #use_example_configs tvrrug/Round2
 #exec_test $1 $2 "Stuff" "$3"
 
+#
+# Test progress display rotation
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_RAMPS_14_EFB
+opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER \
+           SET_PROGRESS_MANUALLY SET_PROGRESS_PERCENT SET_REMAINING_TIME SET_INTERACTION_TIME M73_REPORT \
+           SHOW_PROGRESS_PERCENT SHOW_ELAPSED_TIME SHOW_REMAINING_TIME SHOW_INTERACTION_TIME PRINT_PROGRESS_SHOW_DECIMALS
+exec_test $1 $2 "MEGA2560 RAMPS | 12864 | progress rotation" "$3"
+opt_enable LIGHTWEIGHT_UI
+exec_test $1 $2 "MEGA2560 RAMPS | 12864 LIGHTWEIGHT_UI | progress rotation" "$3"
+opt_disable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER
+exec_test $1 $2 "MEGA2560 RAMPS | 44780 | progress rotation" "$3"
+
 # clean up
 restore_configs

ini/features.ini

 REPETIER_GCODE_M360                    = src_filter=+<src/gcode/host/M360.cpp>
 HAS_GCODE_M876                         = src_filter=+<src/gcode/host/M876.cpp>
 HAS_RESUME_CONTINUE                    = src_filter=+<src/gcode/lcd/M0_M1.cpp>
-LCD_SET_PROGRESS_MANUALLY              = src_filter=+<src/gcode/lcd/M73.cpp>
+SET_PROGRESS_MANUALLY                  = src_filter=+<src/gcode/lcd/M73.cpp>
 HAS_STATUS_MESSAGE                     = src_filter=+<src/gcode/lcd/M117.cpp>
 HAS_LCD_CONTRAST                       = src_filter=+<src/gcode/lcd/M250.cpp>
 HAS_GCODE_M255                         = src_filter=+<src/gcode/lcd/M255.cpp>