marlin

提交图

作者	SHA1	备注	提交日期
daid303	0f3f5d083d	Minor cleanup of the new FAN_KICKSTART code. #334	11 年前
Kevin O'Connor	3d91bd486c	Add "kick fan" feature - briefly run fan at full speed on start. Add a feature to run the cooling fan at full speed for a small period (default 100ms) when first starting the fan. Some fans wont reliably start spinning at low power, and many fans have issue with the PWM at low power. However, once the fan starts spinning it can reliably be set to a wide range of PWM values.	11 年前
Kevin O'Connor	3f2f94ef28	Be consistent in setting of the fan PWM. Always set the FAN PWM value in check_axes_activity() and always use the value of the active move if a move is active.	11 年前
oni303	ab09fa4bbf	fixed pwm generation at pin D12 and D13 when one of them is used as FAN_PIN on Sanguino, added soft pwm entry for FAN_PIN in temperature.cpp	11 年前
daid303	6a9bee27cc	Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.	11 年前
daid303	94ea26ff46	Some minor changes on code style. And a bugfix where the counters for positioning in the stepper where wrong depending on compiler settings. (Caused strange values to reported back with M114 and endstop triggers). Also fixed compiling with FWRETRACT enabled.	11 年前
Erik vd Zalm	b98fb17fe9	Small FREQUENCY_LIMIT changes	11 年前
daid303	8f20562f49	Fix some of the crowded code style. And fixed the conditional. #300	11 年前
daid303	72586eb30a	Solved few warnings.	11 年前
daid303	06b58a9c4f	First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.	11 年前
stohn	de0448343f	added KILL_PIN support / cleaned up manage_inactivity function definition	12 年前
Erik van der Zalm	b67dacdc8f	Fixed AD595 define	12 年前
Erik van der Zalm	ba96059203	add additional dropsegments test	12 年前
zittix	fbd91ab0b5	Fixes #153 for bad call to abs()	12 年前
Erik de Bruijn	e3fe1f0d00	Made a more granular configuration possible PREVENT_LENGTHY_EXTRUDE. You can now decide to allow/disallow large length of extrusions to be executed. Turning off the protection might be beneficial to those who want to do fast and long reversals.	12 年前
Erik van der Zalm	67cf105bc6	Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp) Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.	12 年前
Erik van der Zalm	4ca2f336f0	Changed default MINIMUM_PLANNER_SPEED -> 0.05 Fixed small bug in arcs M105 prints now actual_temp/target_temp	12 年前
Erik van der Zalm	61e09e6be2	Added FAN_PIN -1 checks	12 年前
Erik van der Zalm	116dc86b8a	Fixed type in e-jerk	12 年前
Erik van der Zalm	e056bf8081	Added E-Jerk	12 年前
Erik van der Zalm	aac7aa3bf0	Queued fan control. Issue #90	12 年前
Blair Thompson	046a8e0039	Added more defines to the language.h file so that nowe most of the text strings are now configured via this file. Still got some hunting down to do to complete this task.	12 年前
Daid	88d289caa1	Made plan_buffer_line arguments const, which optimizes better and fixes the RUNOUT_PREVENTION feature.	12 年前
Erik van der Zalm	b48d67ce10	Fixed homing	12 年前
Erik van der Zalm	018c567abf	Moved SLOWDOWN function. (jetty840) Included AD595 calibration options. (daid)	12 年前
Erik van der Zalm	84ea2d61e8	Moved gen7 boards to motherboard type 10, 11 and 12. Split ramps1.3 in Sprinter like config and multiextruder config.	12 年前
Erik van der Zalm	5aa9c41ab1	Changed comment mode for detection. Added M221 extuder multiply factor.	12 年前
Erik van der Zalm	ae3e7586c6	Added HOME_POS. This adds the posibility to make the center 0 Updated the Xsteps ... settings via the LCD menu	12 年前
Erik van der Zalm	a0a1f81913	various changes	12 年前
Erik van der Zalm	bde30b2b48	Corrected e-length calculation in planner	12 年前
Erik van der Zalm	b58eae7657	Corrected e-length calculation in planner	12 年前
Erik van der Zalm	6ef8459494	Corrected distance calculation. (thanks jv4779)	12 年前
Erik van der Zalm	abb7e63906	fixed z-disable bug.	12 年前
Erik van der Zalm	e45e5c68bb	Added support for Gen3+ (Pins file only) Added late z enable. (blddk request) Only calculate look ahead if >2 moves in buffer. Removed some FORCE_INLINE to save memory. Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>	12 年前
Bernhard	3c1a4aac2b	header file simplification	12 年前
Erik van der Zalm	e017228569	Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	12 年前
Bernhard	2bc5e7ec9e	prevent too long extrudes, or too cold extrudes	12 年前
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	12 年前
Erik van der Zalm	af22e9cd38	Some advance modifications	12 年前
Bernhard	7714b98da7	solved some compiler warnings that are now visible in arduino 1.0. Found a couple of unused variables, that I commented. Tried to solve the program memory warning message, and failed.	12 年前
Bernhard	dfd240b260	overworked autotemp, removed one layer of nesting from the ultralcd.	12 年前
Erik van der Zalm	6b86f15686	More 2nd extruder implementation. (Not usable) Advance (not tested)	12 年前
Erik van der Zalm	f75f426dfa	Removed interrupt nesting in the stepper ISR. Add serial checkRx in stepper ISR. Copied HardwareSerial to MarlinSerial (Needed for checkRx).	12 年前
Bernhard	26a1de1e44	force inline	12 年前
Bernhard	f8e170a44b	planner optimization by inline functions	12 年前
Erik van der Zalm	aad4b75b94	First parts 2nd extruder	12 年前
Bernhard	191f36b493	slowdown	12 年前
Erik van der Zalm	c0f8c9fd72	Seperate ENDSTOP_INVERTING for X Y and Z Added simple endstop filter. Corrected M114 count display.	12 年前
Bernhard Kubicek	379ea642e1	make tuneing sub-menu.	12 年前
Erik van der Zalm	4e5becfc51	Added endstop reporting	12 年前

66 次代码提交 (01541ee64ca1239c9bfa593c54085ae78e0b78ec)