marlin

Commit Graph

Аутор	SHA1	Порука	Датум
Scott Lahteine	0729a8f08d	Use the probe travel height for pre-probe move Instead of using the home_bump for Z to move close to the bed before doing a slow probe, use the probe travel height.	пре 8 година
Scott Lahteine	dd94d0b9d5	Fix bed probing bug without PROBE_DOUBLE_TOUCH If `PROBE_DOUBLE_TOUCH` wasn't enabled, the probe move could be way too short! See #4701 for example.	пре 8 година
Scott Lahteine	35a0c46f16	Tweak debug output for probe in G29	пре 8 година
Scott Lahteine	73d86098b7	Marlin patches for homing, esp. Delta	пре 8 година
Scott Lahteine	d641344d3a	Remove redundant probe offset in homing	пре 8 година
Scott Lahteine	00638131e5	Debug logging of nozzle type and offsets	пре 8 година
Scott Lahteine	991a34aff2	Log whether homing with probe or endstop	пре 8 година
esenapaj	1749a7fae3	Suppress warning	пре 8 година
Scott Lahteine	d07d85ac9f	Ensure probe points at the delta edge are kept	пре 8 година
Scott Lahteine	2f223b8c79	Use ABC and XYZ for "3"	пре 8 година
Scott Lahteine	4cd1ad8f28	Adjustments to M209, G28, M605	пре 8 година
Scott Lahteine	280534c06f	Add M211: Enable/Disable Software Endstops	пре 8 година
Scott Lahteine	01d4703429	PREVENT_DANGEROUS_EXTRUDE => PREVENT_COLD_EXTRUSION Also improve the documentation of this and related options, and set EXTRUDE_MINTEMP to 170 everywhere.	пре 8 година
MagoKimbra	28d1e5a946	Fix_Zig_Zag	пре 8 година
Scott Lahteine	12d72363cb	Do Delta radius check without sqrt	пре 8 година
Scott Lahteine	044f800be9	Use SERIAL_PROTOCOLLNPGM in G28	пре 8 година
Scott Lahteine	d309a9647d	Include probe offset for moving "close to the bed"	пре 8 година
Scott Lahteine	35a08eeaeb	Use Z_HOME_DIR over axis_home_dir where we can	пре 8 година
Scott Lahteine	55355a4fb8	Make probed points more symmetrical	пре 8 година
Scott Lahteine	1f776f6034	Tweak some code comments	пре 8 година
Scott Lahteine	748228cf40	Use named indices for delta_grid_spacing	пре 8 година
Scott Lahteine	ead333e7da	line_to_axis_pos => do_homing_move	пре 8 година
Scott Lahteine	7a4ccd7967	Add do_probe_move with Z fixes	пре 8 година
Scott Lahteine	a1bad589c9	Augment debug/homing logging	пре 8 година
Scott Lahteine	41b5c48129	Update software endstops if EEPROM is loaded	пре 8 година
Scott Lahteine	628dcbc764	extruder_multiplier => flow_percentage	пре 8 година
Scott Lahteine	d63b8e2b2b	Additional details for I2C_SLAVE_ADDRESS	пре 8 година
Scott Lahteine	bd928a69ec	Add request, capture, flush to TWIBus	пре 8 година
Scott Lahteine	97e0aed304	Further refinements of TWIBus	пре 8 година
Scott Lahteine	67f119d18b	Add an i2c request handler	пре 8 година
Scott Lahteine	cd496dd9bd	do_blocking_move_to can't be 'inline', takes const ref args	пре 8 година
Scott Lahteine	dd75fca4d9	Make M155 / M156 a bit more flexible	пре 8 година
Scott Lahteine	a99ecf71d8	Add support for i2c slave address	пре 8 година
Scott Lahteine	b63d70b186	Fix serial output for MBL, M303	пре 8 година
Scott Lahteine	45f67164b6	Simplify the delay in kill()	пре 8 година
Scott Lahteine	367dad5902	Sanity check Z_DUAL_ENDSTOPS with DELTA	пре 8 година
Scott Lahteine	7b2abe6fc8	Use steps_to_mm in extruder runout prevent	пре 8 година
Scott Lahteine	d320065320	Within Marlin, maintain most feed rates in mm/s	пре 8 година
Scott Lahteine	a00783c41f	Format probe stowed test code	пре 8 година
AnHardt	f37e8a31d7	Make Allen Key Probe stow by switching off the tests for the probe before the stow move.	пре 8 година
Scott Lahteine	938e6d15c4	Patch up some flaws, here and there	пре 8 година
Scott Lahteine	7e2bd9a233	Z_RAISE_PROBE_* => Z_PROBE_*_HEIGHT	пре 8 година
Scott Lahteine	445458c221	Don't include `zprobe_zoffset` in `do_probe_raise`	пре 8 година
Scott Lahteine	b73203a0b7	Move some includes around to uncover missing deps	пре 8 година
Scott Lahteine	330f82971b	Buzzer requires BEEPER_PIN	пре 8 година
AnHardt	39c4603598	Correct typo in retract.	пре 8 година
Scott Lahteine	63fd1f49a6	PID_EXTRUSION_SCALING, disabled by default	пре 8 година
Thomas Otvald Jensen	fe059f1221	During homing, line_to_axis_pos will make a path which moves across the endstop trigger point. The move is stopped at endstop, so current_position should also be adjusted to reflect this! Caused error in subsequent call in endstop adjustment, since the movement would assume a wrong starting position.	пре 8 година
esenapaj	bd73e6d3c8	Fix for PR #4452 (Additional heater-state output changes) ・Add missing ';'	пре 8 година
Scott Lahteine	bdac2eb13a	Don't set non-existent SLED_PIN	пре 8 година

Први Претходна 1 2 3 4 5 ... Следеће Последњи

1405 Комити (0729a8f08d1ff17459e97d02db9ed4e08c297cc3)