Roxy-3D
21f13f9e57
Stow Probe at end of G29 J3
6 лет назад
KangDroid
6c535081ec
[2.0.x] Add optional menu item to toggle software endstops (#10389 )
6 лет назад
Scott Lahteine
3c5c6d478a
Prettify process_parsed_command
6 лет назад
Scott Lahteine
0535ebc4d2
MESH_BED_LEVELING before PROBE_MANUALLY
6 лет назад
Scott Lahteine
bb7064cc30
Tweak MBL move to bed code
6 лет назад
Chris Pepper
cc6d41e1d3
Use a macro for HAL header redirection (#10380 )
6 лет назад
Luc Van Daele
12785583d0
[2.0.x] G33 MIN_STEPS_PER_SEGMENT (#10386 )
6 лет назад
Yunhui Fu
c96412a78f
[2.0.x] UTF-8 language translation support (#10213 )
6 лет назад
Scott Lahteine
daa712455b
Make sure MBL starts close to the bed
Fix #10390
6 лет назад
Scott Lahteine
4c8751727a
Fix M118 parameter handling
Fix #10388
6 лет назад
Scott Lahteine
3bc179a16f
Compress/update comments ubl_motion
…to fit more code on the screen and correct outdated commentary contrasting ABL.
6 лет назад
Luc Van Daele
646aa20b43
Overhaul of G33 Delta Calibration (#8822 )
6 лет назад
Luc Van Daele
ac2e0afb62
Low Point for delta calibration (#10363 )
6 лет назад
Eduardo José Tagle
57a899a412
[2.0.x] 6th-order jerk-controlled motion planning in real-time for AVR (#10373 )
6 лет назад
Scott Lahteine
5676b187b4
Move etc/udev to buildroot/etc
Followup to #10375 . This is the appropriate place for any system etc folder additions.
6 лет назад
Bob-the-Kuhn
44a03ecfc9
Add Linux compatibility for Arduino boards (#10375 )
6 лет назад
Bob-the-Kuhn
85014cd132
[2.0.x] LPC1768 - automatic selection of upload disk (#10374 )
6 лет назад
Scott Lahteine
8669dba5e6
Merge pull request #10172 from noingwhat/2.0.x-Filament-Change-Acceleration
[2.0.x] Filament load/unload add acceleration for Bowden
6 лет назад
Scott Lahteine
472ab0cc24
Tweak RAMPS SDSS pins
6 лет назад
LichtiMC
b94c8defee
Provide additional information about SMART-RAMPS board (#10353 )
6 лет назад
Scott Lahteine
6f8e228880
Add RESET_PIN to pins_RAMPS_SMART.h
6 лет назад
Sean
2d9b0a66fe
Add Filament Change accelerations
6 лет назад
Scott Lahteine
71d3523254
Add Filament Change accelerations to example configs
6 лет назад
Scott Lahteine
dcb1f1f452
Merge pull request #10351 from thinkyhead/bf2_z_probe_low_point
[2.0.x] Z_PROBE_LOW_POINT to prevent probe/bed damage
6 лет назад
Scott Lahteine
8b8ad14178
Add Z_PROBE_LOW_POINT to prevent damage
6 лет назад
Scott Lahteine
82dafbba33
Add Z_PROBE_LOW_POINT to example configs
6 лет назад
Roxy-3D
a731a723e8
Better i3-2020 Z_PROBE_OFFSET_FROM_EXTRUDER
6 лет назад
Roxy-3D
26cc12eaa4
Resolve corruption of Max7219 Debug LED Matrix
6 лет назад
Scott Lahteine
72c15a5cc9
Add --no-track to mfnew git script
6 лет назад
Scott Lahteine
dca69efc11
Update Bed PID comments
6 лет назад
Scott Lahteine
56486c5c0e
Apply const to manage_inactivity
6 лет назад
Scott Lahteine
a6485456df
Fix LIGHTWEIGHT_UI with UBL
See https://github.com/MarlinFirmware/Marlin/issues/10317#issuecomment -379100702
6 лет назад
Scott Lahteine
e02fc4f1d6
Better RESTORE_LEVELING_AFTER_G28 sanity-check
As suggested by @GMagician
6 лет назад
Scott Lahteine
44a697ab04
Set STM32F1 TEMP_TIMER_FREQUENCY to 1K
Responding to https://github.com/MarlinFirmware/Marlin/pull/8833#issuecomment -379426803
6 лет назад
Scott Lahteine
cec6e19099
Add RepRapPro Huxley configuration
Based on #10343 by @indazoo
6 лет назад
Scott Lahteine
9ff4e9e1e6
Patch _IS_HW_SPI so defined() works
6 лет назад
Scott Lahteine
cea398849e
Tweak to gcode_line_error/return
6 лет назад
Scott Lahteine
4382f2124d
Merge pull request #10337 from ejtagle/bugfix-2.0.x
[2.0.x] 6th-order jerk-controlled motion planning in real-time
6 лет назад
etagle
a29adde5c0
Implement BEZIER_JERK_CONTROL
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
6 лет назад
Scott Lahteine
5932df7ea1
Add BEZIER_JERK_CONTROL to example configs
6 лет назад
Scott Lahteine
93524c1994
Merge pull request #10045 from Lenbok/2.0.x-monitor_chamber_temperature_and_auto_fan
[2.0.x] Monitor chamber temperature, with auto fan control.
6 лет назад
Lenbok
0e8242180d
Chamber temperature monitoring and auto fan control.
This is an initial cut for feedback, updated for 2.0.x.
Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?
Chamber temperatures are not reported on the LCD in any way.
When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.
As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
6 лет назад
Scott Lahteine
5b3bda1c16
Add Chamber Temp options to example configs
6 лет назад
Bob-the-Kuhn
acda4ecb20
Fix DUE Trinamic SW/HW SPI sanity check (#10336 )
6 лет назад
Bob-the-Kuhn
ab715c70d1
TMC SPI sanity-check and pins debugging (#10324 )
6 лет назад
Scott Lahteine
4dc7e64789
Update Slovak language
Based on #10313 by @rmoravcik
6 лет назад
Scott Lahteine
0dccf9ea6a
Merge pull request #10318 from marcio-ao/pr-einsy-retro-tmc2130
[2.0.x] Fix TMC2130 DIAG1 active high, Einsy Retro
6 лет назад
Marcio Teixeira
2efc072fdb
Clear progress bar on completion (#10333 )
Fix #10330
6 лет назад
GMagician
6ce060cfe0
[2.0.x] Update language_it.h (#10322 )
Updated to #10296
6 лет назад
Marcio Teixeira
9356cf648f
Added support for Einsy Retro
http://reprap.org/wiki/EinsyRetro
6 лет назад