Scott Lahteine
36b97bde9f
clear_block_buffer, kill_current_block in quick_stop
6 yıl önce
Scott Lahteine
99282a46e9
Make sure ABL (manual) starts close to the bed
6 yıl önce
Roxy-3D
21f13f9e57
Stow Probe at end of G29 J3
6 yıl önce
KangDroid
6c535081ec
[2.0.x] Add optional menu item to toggle software endstops (#10389 )
6 yıl önce
Scott Lahteine
3c5c6d478a
Prettify process_parsed_command
6 yıl önce
Scott Lahteine
0535ebc4d2
MESH_BED_LEVELING before PROBE_MANUALLY
6 yıl önce
Scott Lahteine
bb7064cc30
Tweak MBL move to bed code
6 yıl önce
Chris Pepper
cc6d41e1d3
Use a macro for HAL header redirection (#10380 )
6 yıl önce
Luc Van Daele
12785583d0
[2.0.x] G33 MIN_STEPS_PER_SEGMENT (#10386 )
6 yıl önce
Yunhui Fu
c96412a78f
[2.0.x] UTF-8 language translation support (#10213 )
6 yıl önce
Scott Lahteine
daa712455b
Make sure MBL starts close to the bed
Fix #10390
6 yıl önce
Scott Lahteine
4c8751727a
Fix M118 parameter handling
Fix #10388
6 yıl önce
Scott Lahteine
3bc179a16f
Compress/update comments ubl_motion
…to fit more code on the screen and correct outdated commentary contrasting ABL.
6 yıl önce
Luc Van Daele
646aa20b43
Overhaul of G33 Delta Calibration (#8822 )
6 yıl önce
Luc Van Daele
ac2e0afb62
Low Point for delta calibration (#10363 )
6 yıl önce
Eduardo José Tagle
57a899a412
[2.0.x] 6th-order jerk-controlled motion planning in real-time for AVR (#10373 )
6 yıl önce
Scott Lahteine
5676b187b4
Move etc/udev to buildroot/etc
Followup to #10375 . This is the appropriate place for any system etc folder additions.
6 yıl önce
Bob-the-Kuhn
44a03ecfc9
Add Linux compatibility for Arduino boards (#10375 )
6 yıl önce
Bob-the-Kuhn
85014cd132
[2.0.x] LPC1768 - automatic selection of upload disk (#10374 )
6 yıl önce
Scott Lahteine
8669dba5e6
Merge pull request #10172 from noingwhat/2.0.x-Filament-Change-Acceleration
[2.0.x] Filament load/unload add acceleration for Bowden
6 yıl önce
Scott Lahteine
472ab0cc24
Tweak RAMPS SDSS pins
6 yıl önce
LichtiMC
b94c8defee
Provide additional information about SMART-RAMPS board (#10353 )
6 yıl önce
Scott Lahteine
6f8e228880
Add RESET_PIN to pins_RAMPS_SMART.h
6 yıl önce
Sean
2d9b0a66fe
Add Filament Change accelerations
6 yıl önce
Scott Lahteine
71d3523254
Add Filament Change accelerations to example configs
6 yıl önce
Scott Lahteine
dcb1f1f452
Merge pull request #10351 from thinkyhead/bf2_z_probe_low_point
[2.0.x] Z_PROBE_LOW_POINT to prevent probe/bed damage
6 yıl önce
Scott Lahteine
8b8ad14178
Add Z_PROBE_LOW_POINT to prevent damage
6 yıl önce
Scott Lahteine
82dafbba33
Add Z_PROBE_LOW_POINT to example configs
6 yıl önce
Roxy-3D
a731a723e8
Better i3-2020 Z_PROBE_OFFSET_FROM_EXTRUDER
6 yıl önce
Roxy-3D
26cc12eaa4
Resolve corruption of Max7219 Debug LED Matrix
6 yıl önce
Scott Lahteine
72c15a5cc9
Add --no-track to mfnew git script
6 yıl önce
Scott Lahteine
dca69efc11
Update Bed PID comments
6 yıl önce
Scott Lahteine
56486c5c0e
Apply const to manage_inactivity
6 yıl önce
Scott Lahteine
a6485456df
Fix LIGHTWEIGHT_UI with UBL
See https://github.com/MarlinFirmware/Marlin/issues/10317#issuecomment -379100702
6 yıl önce
Scott Lahteine
e02fc4f1d6
Better RESTORE_LEVELING_AFTER_G28 sanity-check
As suggested by @GMagician
6 yıl önce
Scott Lahteine
44a697ab04
Set STM32F1 TEMP_TIMER_FREQUENCY to 1K
Responding to https://github.com/MarlinFirmware/Marlin/pull/8833#issuecomment -379426803
6 yıl önce
Scott Lahteine
cec6e19099
Add RepRapPro Huxley configuration
Based on #10343 by @indazoo
6 yıl önce
Scott Lahteine
9ff4e9e1e6
Patch _IS_HW_SPI so defined() works
6 yıl önce
Scott Lahteine
cea398849e
Tweak to gcode_line_error/return
6 yıl önce
Scott Lahteine
4382f2124d
Merge pull request #10337 from ejtagle/bugfix-2.0.x
[2.0.x] 6th-order jerk-controlled motion planning in real-time
6 yıl önce
etagle
a29adde5c0
Implement BEZIER_JERK_CONTROL
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
6 yıl önce
Scott Lahteine
5932df7ea1
Add BEZIER_JERK_CONTROL to example configs
6 yıl önce
Scott Lahteine
93524c1994
Merge pull request #10045 from Lenbok/2.0.x-monitor_chamber_temperature_and_auto_fan
[2.0.x] Monitor chamber temperature, with auto fan control.
6 yıl önce
Lenbok
0e8242180d
Chamber temperature monitoring and auto fan control.
This is an initial cut for feedback, updated for 2.0.x.
Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?
Chamber temperatures are not reported on the LCD in any way.
When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.
As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
6 yıl önce
Scott Lahteine
5b3bda1c16
Add Chamber Temp options to example configs
6 yıl önce
Bob-the-Kuhn
acda4ecb20
Fix DUE Trinamic SW/HW SPI sanity check (#10336 )
6 yıl önce
Bob-the-Kuhn
ab715c70d1
TMC SPI sanity-check and pins debugging (#10324 )
6 yıl önce
Scott Lahteine
4dc7e64789
Update Slovak language
Based on #10313 by @rmoravcik
6 yıl önce
Scott Lahteine
0dccf9ea6a
Merge pull request #10318 from marcio-ao/pr-einsy-retro-tmc2130
[2.0.x] Fix TMC2130 DIAG1 active high, Einsy Retro
6 yıl önce
Marcio Teixeira
2efc072fdb
Clear progress bar on completion (#10333 )
Fix #10330
6 yıl önce