marlin

Commit graph

Autor	SHA1	Nachricht	Datum
Michael Moon	8d0916af13	allow Marlin to actually compile with Makefile pulled from Sprinter and a few other modifications	vor 12 Jahren
Bernhard	3c1a4aac2b	header file simplification	vor 13 Jahren
Bernhard	415aadf704	lcd panel bed support advance and ultipanel not any more in default config	vor 13 Jahren
Bernhard	f312216e97	Revert "untestest commit, so I don't loose code.. features runout prevention addons" This reverts commit 651cde8b98.	vor 13 Jahren
Bernhard	651cde8b98	untestest commit, so I don't loose code.. features runout prevention addons	vor 13 Jahren
Erik van der Zalm	e017228569	Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	vor 13 Jahren
Bernhard	88ee053af0	heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.	vor 13 Jahren
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	vor 13 Jahren
Bernhard	7714b98da7	solved some compiler warnings that are now visible in arduino 1.0. Found a couple of unused variables, that I commented. Tried to solve the program memory warning message, and failed.	vor 13 Jahren
Bernhard	59205ac5fc	preliminiary implementation for the early heating finish. Might be replaced by something more clever, e.g. by erik, and does not yet support the second extruder or the bed. its kind of not so cool, because you need 6 more ints. Maybe isheating() should use the degrees directly, as it is not used in time-critical anyways. Then it would be much easier. to have the offsets without additional variables.	vor 13 Jahren
Erik van der Zalm	dd5296ad4d	Fixed temperature reading bug. (When using the lower and upper adc input bank)	vor 13 Jahren
Erik van der Zalm	959d82e81e	Small temperature disable bug.	vor 13 Jahren
Erik van der Zalm	2e43f9c809	Changed min max temperature code.	vor 13 Jahren
Erik van der Zalm	6841a10446	Fixed max/min temperature bug	vor 13 Jahren
Erik van der Zalm	ff69e0a772	Changed max/min temp init. Removed second uart from sabguino core	vor 13 Jahren
Bernhard Kubicek	a9c7da06e3	and changed ultipanel to have the mm/sec and not mm/min Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 Conflicts: Marlin/Marlin.pde Marlin/ultralcd.h	vor 13 Jahren
Erik van der Zalm	331e82dcd3	Buffer size > 16	vor 13 Jahren
Bernhard Kubicek	c57906b627	fixed bug with adjusting ki in realtime.	vor 13 Jahren
Erik van der Zalm	65934eee9c	A lot of changes in the planner code	vor 13 Jahren
Bernhard Kubicek	ff592b056a	heater power repair.	vor 13 Jahren
Bernhard Kubicek	e9adfa27b5	re-enabled heaterpower as storage for the current storage of the heater PWM duty cycle. the M301 now returns the current PID settings of the machine. M105 returns heating pwm duty cylce as "@:"	vor 13 Jahren
Bernhard Kubicek	ba8a53a40f	Streaming.h is gone. It conflicted with PROGMEM. And saving memory is more important than nicer code, imho	vor 13 Jahren
Bernhard Kubicek	ab154d5592	project progmem finished: total change with ultipanel: 2456 byte free ram initial. now: 4374 ram.	vor 13 Jahren
Bernhard Kubicek	72ace55e6a	better visibility of public/private/imported variables	vor 13 Jahren
Erik van der Zalm	e3af73ee0c	Thermistor name problem	vor 13 Jahren
Bernhard Kubicek	79d1bfb5c0	made many possible variables static, so they cannot be used extern.	vor 13 Jahren
Bernhard Kubicek	1d171e9e52	reformating and some minor bugs/things found on the way.	vor 13 Jahren
Bernhard Kubicek	900e0c9bf2	overworked the serial responses. Quite difficult, since many texts are Pronterface protocol.	vor 13 Jahren
Bernhard Kubicek	1740a83e11	correcting commit errors.	vor 13 Jahren
Bernhard Kubicek	2afb7bd4cf	refactured temperature.cpp so that there are now abstract functions to access temperatures.	vor 13 Jahren
Erik van der Zalm	2e8e8878e5	Corrected temp variables.	vor 13 Jahren
Erik van der Zalm	d15f01e1b4	Temperature changes	vor 13 Jahren
Bernhard Kubicek	ea86a5e10f	moved the variables in the ISR, thats the most normal use case of static.	vor 13 Jahren
Bernhard Kubicek	b9ea0651ec	Revert "this is not working. Do you maybe know why?" This reverts commit 8bcdb9f5f0.	vor 13 Jahren
Bernhard Kubicek	8bcdb9f5f0	this is not working. Do you maybe know why?	vor 13 Jahren
Bernhard Kubicek	40e8081623	changed end of line to windows, which seems to be the majority of developers main platform.	vor 13 Jahren
Bernhard Kubicek	00674af3a8	merge from the branch bkubicek/Marlin/zalmmerge	vor 13 Jahren
Erik van der Zalm	bf879ceaa9	Added thermistor tables	vor 13 Jahren
Erik van der Zalm	094afe7c10	Merged Marlin, Marlin non gen6 and Ultimaker changes	vor 13 Jahren

37 Commits (42bedb3f604ea685dc8b26c2a690ac1891361862)